libsoup: Update from 2.62.0 to 2.62.1

[termux-packages] / packages / mpd / mpdconf.example.patch

--- ./doc/mpdconf.example       2017-07-18 12:54:14.570036043 +0200
+++ ./doc/mpdconf.example       2017-07-18 12:56:34.270035990 +0200
@@ -10,14 +10,14 @@
 # be disabled and audio files will only be accepted over ipc socket (using
 # file:// protocol) or streaming files over an accepted protocol.
 #
-#music_directory               "~/music"
+music_directory        "/sdcard/Music"
 #
 # This setting sets the MPD internal playlist directory. The purpose of this
 # directory is storage for playlists created by MPD. The server will use 
 # playlist files not created by the server but only if they are in the MPD
 # format. This setting defaults to playlist saving being disabled.
 #
-#playlist_directory            "~/.mpd/playlists"
+playlist_directory             "~/.mpd/playlists"
 #
 # This setting sets the location of the MPD database. This file is used to
 # load the database at server start up and store the database while the 
@@ -25,7 +25,7 @@
 # MPD to accept files over ipc socket (using file:// protocol) or streaming
 # files over an accepted protocol.
 #
-#db_file                       "~/.mpd/database"
+db_file                        "~/.mpd/database"
 # 
 # These settings are the locations for the daemon log files for the daemon.
 # These logs are great for troubleshooting, depending on your log_level
@@ -34,25 +34,25 @@
 # The special value "syslog" makes MPD use the local syslog daemon. This
 # setting defaults to logging to syslog, otherwise logging is disabled.
 #
-#log_file                      "~/.mpd/log"
+#log_file                      "@TERMUX_HOME@/.mpd/log"
 #
 # This setting sets the location of the file which stores the process ID
 # for use of mpd --kill and some init scripts. This setting is disabled by
 # default and the pid file will not be stored.
 #
-#pid_file                      "~/.mpd/pid"
+pid_file                       "~/.mpd/pid"
 #
 # This setting sets the location of the file which contains information about
 # most variables to get MPD back into the same general shape it was in before
 # it was brought down. This setting is disabled by default and the server 
 # state will be reset on server start up.
 #
-#state_file                    "~/.mpd/state"
+state_file                     "~/.mpd/state"
 #
 # The location of the sticker database.  This is a database which
 # manages dynamic information attached to songs.
 #
-#sticker_file                  "~/.mpd/sticker.sql"
+sticker_file                   "~/.mpd/sticker.sql"
 #
 ###############################################################################
 
@@ -77,17 +77,18 @@
 # should be paid if this is assigned to anything other then the default, any.
 # This setting can deny access to control of the daemon. Not effective if
 # systemd socket activiation is in use.
-#
+# For local connections only 
+#bind_to_address               "localhost"
 # For network
 #bind_to_address               "any"
 #
 # And for Unix Socket
-#bind_to_address               "~/.mpd/socket"
+bind_to_address                "@TERMUX_PREFIX@/tmp/mpd.socket"
 #
 # This setting is the TCP port that is desired for the daemon to get assigned
-# to.
+# to. Normally this is 6600 but for termux this port needs to be above 8000. 
 #
-#port                          "6600"
+#port                          "8600"
 #
 # This setting controls the type of information which is logged. Available 
 # setting arguments are "default", "secure" or "verbose". The "verbose" setting
@@ -137,12 +138,12 @@
 # If this setting is set to "yes", MPD will discover audio files by following 
 # symbolic links outside of the configured music_directory.
 #
-#follow_outside_symlinks       "yes"
+follow_outside_symlinks        "yes"
 #
 # If this setting is set to "yes", MPD will discover audio files by following
 # symbolic links inside of the configured music_directory.
 #
-#follow_inside_symlinks                "yes"
+follow_inside_symlinks         "yes"
 #
 ###############################################################################
 
@@ -205,28 +206,6 @@
 # blocks. Setting this block is optional, though the server will only attempt
 # autodetection for one sound card.
 #
-# An example of an ALSA output:
-#
-#audio_output {
-#      type            "alsa"
-#      name            "My ALSA Device"
-##     device          "hw:0,0"        # optional
-##     mixer_type      "hardware"      # optional
-##     mixer_device    "default"       # optional
-##     mixer_control   "PCM"           # optional
-##     mixer_index     "0"             # optional
-#}
-#
-# An example of an OSS output:
-#
-#audio_output {
-#      type            "oss"
-#      name            "My OSS Device"
-##     device          "/dev/dsp"      # optional
-##     mixer_type      "hardware"      # optional
-##     mixer_device    "/dev/mixer"    # optional
-##     mixer_control   "PCM"           # optional
-#}
 #
 # An example of a shout output (for streaming to Icecast):
 #
@@ -257,7 +236,8 @@
 #      type            "recorder"
 #      name            "My recorder"
 #      encoder         "vorbis"                # optional, vorbis or lame
-#      path            "/var/lib/mpd/recorder/mpd.ogg"
+##  for termux changed "path" to somewhere on android that works
+#      path            "~/mpd.ogg" 
 ##     quality         "5.0"                   # do not define if bitrate is defined
 #      bitrate         "128"                   # do not define if quality is defined
 #      format          "44100:16:1"
@@ -286,41 +266,34 @@
 ##     sink            "remote_server_sink"    # optional
 #}
 #
-# An example of a winmm output (Windows multimedia API).
-#
-#audio_output {
-#      type            "winmm"
-#      name            "My WinMM output"
-##     device          "Digital Audio (S/PDIF) (High Definition Audio Device)" # optional
-#              or
-##     device          "0"             # optional
-##     mixer_type      "hardware"      # optional
-#}
+
+# An example of an opensl android output.
+audio_output {
+        type            "sles"
+        name            "OpenSLES output"
+        mixer_type      "software"
+}
+
 #
 # An example of an openal output.
 #
-#audio_output {
-#      type            "openal"
-#      name            "My OpenAL output"
-##     device          "Digital Audio (S/PDIF) (High Definition Audio Device)" # optional
-#}
-#
-# An example of an sndio output.
-#
-#audio_output {
-#      type            "sndio"
-#      name            "sndio output"
-#      mixer_type      "software"
-#}
-#
-# An example of an OS X output:
+audio_output {
+       type            "openal"
+       name            "OpenAL output"
+       mixer_type      "software"
+       device          "OpenSL"
+       enabled         "no"
+}
+#Fifo output for visualizations in ncmpcpp-git
+ audio_output {
+        type            "fifo"
+        name            "ncmpcpp visualizer"
+        path            "~/../usr/tmp/mpd.fifo"
+        format          "44100:16:2"
+       enabled         "no"
+}
+
 #
-#audio_output {
-#      type            "osx"
-#      name            "My OS X Device"
-##     device          "Built-in Output"       # optional
-##     channel_map      "-1,-1,0,1"    # optional
-#}
 #
 ## Example "pipe" output:
 #