-TERMUX_PKG_HOMEPAGE=http://python.org/
+TERMUX_PKG_HOMEPAGE=https://python.org/
TERMUX_PKG_DESCRIPTION="Python 3 programming language intended to enable clear programs"
-# lib/python3.4/lib-dynload/_ctypes.cpython-34m.so links to ffi.
-# openssl for ensurepip.
-# libbz2 for the bz2 module.
-# ncurses-ui-libs for the curses.panel module.
TERMUX_PKG_DEPENDS="libandroid-support, ncurses, readline, libffi, openssl, libutil, libbz2, libsqlite, gdbm, ncurses-ui-libs, libcrypt, liblzma"
TERMUX_PKG_HOSTBUILD=true
-_MAJOR_VERSION=3.5
-TERMUX_PKG_VERSION=${_MAJOR_VERSION}.2
-TERMUX_PKG_BUILD_REVISION=1
-TERMUX_PKG_SRCURL=http://www.python.org/ftp/python/${TERMUX_PKG_VERSION}/Python-${TERMUX_PKG_VERSION}.tar.xz
+_MAJOR_VERSION=3.6
+TERMUX_PKG_VERSION=${_MAJOR_VERSION}.1
+TERMUX_PKG_SRCURL=https://www.python.org/ftp/python/${TERMUX_PKG_VERSION}/Python-${TERMUX_PKG_VERSION}.tar.xz
+TERMUX_PKG_SHA256=a01810ddfcec216bcdb357a84bfaafdfaa0ca42bbdaa4cb7ff74f5a9961e4041
# The flag --with(out)-pymalloc (disable/enable specialized mallocs) is enabled by default and causes m suffix versions of python.
# Set ac_cv_func_wcsftime=no to avoid errors such as "character U+ca0025 is not in range [U+0000; U+10ffff]"
TERMUX_PKG_EXTRA_CONFIGURE_ARGS+=" ac_cv_func_faccessat=no"
# The gethostbyname_r function does not exist on device libc:
TERMUX_PKG_EXTRA_CONFIGURE_ARGS+=" ac_cv_func_gethostbyname_r=no"
-TERMUX_PKG_EXTRA_CONFIGURE_ARGS+=" --build=$TERMUX_HOST_TUPLE --disable-ipv6 --with-system-ffi --without-ensurepip"
+TERMUX_PKG_EXTRA_CONFIGURE_ARGS+=" --build=$TERMUX_BUILD_TUPLE --with-system-ffi --without-ensurepip"
# Hard links does not work on Android 6:
TERMUX_PKG_EXTRA_CONFIGURE_ARGS+=" ac_cv_func_linkat=no"
# Posix semaphores are not supported on Android:
TERMUX_PKG_EXTRA_CONFIGURE_ARGS+=" ac_cv_posix_semaphores_enabled=no"
-TERMUX_PKG_RM_AFTER_INSTALL="lib/python${_MAJOR_VERSION}/test lib/python${_MAJOR_VERSION}/tkinter lib/python${_MAJOR_VERSION}/turtledemo lib/python${_MAJOR_VERSION}/idlelib bin/python${_MAJOR_VERSION}m bin/python*-config bin/idle*"
+# Do not assume getaddrinfo is buggy when cross compiling:
+TERMUX_PKG_EXTRA_CONFIGURE_ARGS+=" ac_cv_buggy_getaddrinfo=no"
+TERMUX_PKG_RM_AFTER_INSTALL="
+bin/python${_MAJOR_VERSION}m bin/idle*
+lib/python${_MAJOR_VERSION}/idlelib
+lib/python${_MAJOR_VERSION}/test
+lib/python${_MAJOR_VERSION}/tkinter
+lib/python${_MAJOR_VERSION}/turtledemo
+"
-# Python does not use CPPFLAGS when building modules, so add this to CFLAGS as well (needed when building _cursesmodule):
-# export CFLAGS="$CFLAGS -isystem $TERMUX_PREFIX/include/libandroid-support"
-
-# NOTE: termux_step_host_build may not be called if host build is cached.
-export TERMUX_ORIG_PATH=$PATH
-export PATH=$TERMUX_PKG_HOSTBUILD_DIR:$PATH
termux_step_host_build () {
- # We need a host-built Parser/pgen binary, copied into cross-compile build in termux_step_post_configure() below
+ # We need native Parser/pgen binary, copied into cross-compile
+ # build in termux_step_post_configure().
$TERMUX_PKG_SRCDIR/configure
- make Parser/pgen
- # We need a python$_MAJOR_VERSION binary to be picked up by configure check:
make
- rm -f python$_MAJOR_VERSION # Remove symlink if already exists to get a newer timestamp
- ln -s python python$_MAJOR_VERSION
+ # We also need a python$_MAJOR_VERSION binary to be picked up
+ # by configure check.
+ ln -f -s python python$_MAJOR_VERSION
+}
+
+termux_step_pre_configure() {
+ # Put the host-built python in path:
+ export TERMUX_ORIG_PATH=$PATH
+ export PATH=$TERMUX_PKG_HOSTBUILD_DIR:$PATH
+
+ # Needed when building with clang, as setup.py only probes
+ # gcc for include paths when finding headers for determining
+ # if extension modules should be built (specifically, the
+ # zlib extension module is not built without this):
+ CPPFLAGS+=" -I$TERMUX_STANDALONE_TOOLCHAIN/sysroot/usr/include"
+ LDFLAGS+=" -L$TERMUX_STANDALONE_TOOLCHAIN/sysroot/usr/lib"
}
termux_step_post_configure () {
cp $TERMUX_PKG_HOSTBUILD_DIR/Parser/pgen $TERMUX_PKG_BUILDDIR/Parser/pgen
cp $TERMUX_PKG_HOSTBUILD_DIR/Programs/_freeze_importlib $TERMUX_PKG_BUILDDIR/Programs/_freeze_importlib
- $TERMUX_TOUCH -d "next hour" $TERMUX_PKG_BUILDDIR/Parser/pgen
- $TERMUX_TOUCH -d "next hour" $TERMUX_PKG_BUILDDIR/Programs/_freeze_importlib
+ touch -d "next hour" $TERMUX_PKG_BUILDDIR/Parser/pgen
+ touch -d "next hour" $TERMUX_PKG_BUILDDIR/Programs/_freeze_importlib
}
termux_step_post_make_install () {
- (cd $TERMUX_PREFIX/bin && rm -f python && ln -s python3 python)
- (cd $TERMUX_PREFIX/share/man/man1 && rm -f python.1 && ln -s python3.1 python.1)
- # Restore path which termux_step_host_build messed with
- export PATH=$TERMUX_ORIG_PATH
+ (cd $TERMUX_PREFIX/bin && rm -f python && ln -s python3 python)
+ (cd $TERMUX_PREFIX/share/man/man1 && rm -f python.1 && ln -s python3.1 python.1)
+ # Restore path which termux_step_host_build messed with
+ export PATH=$TERMUX_ORIG_PATH
# Save away pyconfig.h so that the python-dev subpackage does not take it.
# It is required by ensurepip so bundled with the main python package.
# Copied back in termux_step_post_massage() after the python-dev package has been built.
mv $TERMUX_PREFIX/include/python${_MAJOR_VERSION}m/pyconfig.h $TERMUX_PKG_TMPDIR/pyconfig.h
-
- # This makefile is used by pip to compile C code, and thinks that ${TERMUX_HOST_PLATFORM}-gcc
- # and other prefixed tools should be used, but we want unprefixed ones.
- # Also Remove the specs flag since that is default in the gcc Termux package:
- perl -p -i -e "s|${TERMUX_HOST_PLATFORM}-||g,s|${_SPECSFLAG}||g" $TERMUX_PREFIX/lib/python${_MAJOR_VERSION}/config-${_MAJOR_VERSION}m/Makefile
}
termux_step_post_massage () {
# Verify that desired modules have been included:
for module in _ssl _bz2 zlib _curses _sqlite3 _lzma; do
if [ ! -f lib/python${_MAJOR_VERSION}/lib-dynload/${module}.*.so ]; then
- echo "ERROR: Python module library $module not built"
- exit 1
+ termux_error_exit "Python module library $module not built"
fi
done
~mdw / termux-packages / blobdiff