mdw@git.distorted.org.uk Git - secnet/blob - debian/changelog

   1 secnet (0.4.1~~) unstable; urgency=medium
   2
   3   * Implement `keepalive' site option, to try to keep link always up.
   4
   5  --
   6
   7 secnet (0.4.0) unstable; urgency=low
   8
   9   Debugging improvements:
  10   * Packet-level debugging from site notes errors from transmit.
  11   * Report when transport peers updated as a result of transmit.
  12
  13  -- Ian Jackson <ijackson@chiark.greenend.org.uk>  Sat, 28 Feb 2015 15:03:00 +0000
  14
  15 secnet (0.4.0~beta2) unstable; urgency=low
  16
  17   Polypath bugfixes:
  18   * Ignore IPv6 Unique Local unicast addresses.
  19   * Skip "tentative" IPv6 local addresses.
  20   * Improve logging and debug output.
  21
  22   Portability fix:
  23   * Build where size_t is not compatible with int.
  24
  25   Build system and packaging fixes:
  26   * Makefile: support DESTDIR.
  27   * debian/rules: set DESTDIR (not prefix).
  28   * debian/rules: Support dpkg-buildflags.
  29   * Install ipaddrset.py and secnet.8 with correct permissions.
  30   * Fix check for <linux/if_tun.h> and git rid of our copy.
  31   * Use -lresolv only if inet_aton is not found otherwise.
  32   * Use -lnsl only if inet_ntoa is not found otherwise.
  33   * debian/rules: Provide build-arch and build-indep targets.
  34   * debian/rules: Do not run build for *-indep (!)
  35   * Makefile.in: Putative dual (backport and not) release build process doc.
  36
  37   Copyright updates:
  38   * Update to GPLv3.  Add missing copyright notices and credits.
  39   * Get rid of old FSF street address; use URL instead.
  40   * Remove obsolete LICENCE.txt (which was for snprintf reimplementation).
  41   * Remove obsolete references to Cendio (for old ipaddr.py).
  42
  43  -- Ian Jackson <ijackson@chiark.greenend.org.uk>  Sun, 28 Dec 2014 17:14:10 +0000
  44
  45 secnet (0.4.0~beta1) unstable; urgency=low
  46
  47   New features:
  48   * Support transport over IPv6.  (We do not yet carry IPv6 in the private
  49     network.)  IPv6 support depends on IPv6-capable adns (adns 1.5.x).
  50   * New polypath comm, which can duplicate packets so as to send them via
  51     multiple routes over the public network, for increased
  52     reliability/performance (but increased cost).  Currently Linux-only
  53     but should be fairly easy to port.
  54   * Support multiple public addresses for peers.
  55   * Discard previously-received packets (by default).
  56
  57   Logging improvements:
  58   * Report (each first) transmission and reception success and failure.
  59   * Log reason for DNS reolution failure.
  60   * Log unexpected kinds of death from userv.
  61   * Log authbind exit status as errno value (if appropriate).
  62
  63   Configuration adjustments:
  64   * Adjust default number of mobile peer addresses to store when a peer
  65     public address is also configured.
  66   * Make specifying peer public port optional.  This avoids making special
  67     arrangements to bind to a port for in mobile sites with no public
  68     stable address.
  69
  70   Bugfixes:
  71   * Hackypar children will die if they get a terminating signal.
  72   * Fix signal dispositions inherited by secnet's child processes.
  73   * Fix off-by-one error which prevented setting transport-peers-max to 5.
  74
  75   Test, build and internal improvements:
  76   * Use conventional IP address handling library ipaddr.py.
  77   * Provide a fuzzer for the slip decoder.
  78   * Build system improvements.
  79   * Many source code cleanups.
  80
  81  -- Ian Jackson <ijackson@chiark.greenend.org.uk>  Sun, 26 Oct 2014 15:28:31 +0000
  82
  83 secnet (0.3.4) unstable; urgency=low
  84
  85   SECURITY FIX:
  86   * The previous security fix to buffer handling was entirely wrong.  This
  87     one is better.  Thanks to Simon Tatham for the report and the patch.
  88
  89  -- Ian Jackson <ijackson@chiark.greenend.org.uk>  Mon, 22 Sep 2014 16:16:11 +0100
  90
  91 secnet (0.3.3) unstable; urgency=high
  92
  93   SECURITY FIXES:
  94   * Pass correct size argument to recvfrom.  This is a serious security
  95     problem which may be exploitable from outside the VPN.
  96   * Fix a memory leak in some error logging.
  97
  98   Other related fixes:
  99   * Two other latent bugs in buffer length handling found and fixed.
 100   * Non-critical stylistic improvements to buffer length handling, to make
 101     the code clearer and to assist audit.
 102
 103  -- Ian Jackson <ijackson@chiark.greenend.org.uk>  Fri, 19 Sep 2014 23:50:45 +0100
 104
 105 secnet (0.3.3~beta1) unstable; urgency=low
 106
 107   Installation compatibility fix:
 108   * In make-secnet-sites, always use our own ipaddr.py even if the
 109     incompatible modern ipaddr.py is installed (eg via python-ipaddr.deb).
 110     (Future versions of secnet are going to need that Python module to be
 111     installed.)
 112
 113   For links involving mobile sites:
 114   * Use source of NAK packets as hint for peer transport address.
 115   * When initiating rekey, make use of data transport peer addresses.
 116
 117   Build fix:
 118   * Provide clean target in test-example/Makefile.
 119
 120  -- Ian Jackson <ijackson@chiark.greenend.org.uk>  Fri, 19 Sep 2014 00:11:44 +0100
 121
 122 secnet (0.3.2) unstable; urgency=low
 123
 124   * Release of 0.3.2.  No code changes since 0.3.1~beta1.
 125
 126  -- Ian Jackson <ijackson@chiark.greenend.org.uk>  Thu, 26 Jun 2014 20:27:58 +0100
 127
 128 secnet (0.3.2~beta1) unstable; urgency=low
 129
 130   For links involving mobile sites:
 131   * SECURITY: Properly update peer address array when it is full.
 132   * Do name-resolution on peer-initiated key setup too, when we are mobile
 133     (and other name-resolution improvements).
 134
 135   Other minor improvements:
 136   * Log peer addresses on key exchange timeout.
 137   * When printing version (eg during startup), use value from git-describe
 138     and thus include git commit id where applicable.
 139   * Updates to release checklist in Makefile.in.
 140   * Use C99 _Bool for bool_t.
 141
 142  -- Ian Jackson <ijackson@chiark.greenend.org.uk>  Fri, 06 Jun 2014 01:17:54 +0100
 143
 144 secnet (0.3.1) unstable; urgency=low
 145
 146   * Release of 0.3.1.  No code changes since 0.3.1~beta3.
 147
 148  -- Ian Jackson <ijackson@chiark.greenend.org.uk>  Thu, 15 May 2014 01:08:30 +0100
 149
 150 secnet (0.3.1~beta3) unstable; urgency=low
 151
 152   * Build fixes for non-i386 architectures and gcc 4.8.2.
 153
 154  -- Ian Jackson <ijackson@chiark.greenend.org.uk>  Thu, 08 May 2014 19:53:43 +0100
 155
 156 secnet (0.3.1~beta2) unstable; urgency=low
 157
 158   Fix relating to new fragmentation / ICMP functionality:
 159   * Generate ICMP packets correctly in point-to-point configurations.
 160
 161  -- Ian Jackson <ijackson@chiark.greenend.org.uk>  Sat, 03 May 2014 18:58:09 +0100
 162
 163 secnet (0.3.1~beta1) unstable; urgency=low
 164
 165   Security fixes (vulnerabilities are to inside attackers only):
 166   * SECURITY: Fixes to MTU and fragmentation handling.
 167   * SECURITY: Correctly set "unused" ICMP header field.
 168   * SECURITY: Fix IP length check not to crash on very short packets.
 169
 170   New feature:
 171   * Make the inter-site MTU configurable, and negotiate it with the peer.
 172
 173   Bugfixes etc.:
 174   * Fix netlink SEGV on clientless netlinks (i.e. configuration error).
 175   * Fix formatting error in p-t-p startup message.
 176   * Do not send ICMP errors in response to unknown incoming ICMP.
 177   * Fix formatting error in secnet.8 manpage.
 178   * Internal code rearrangements and improvements.
 179
 180   Packaging improvements:
 181   * Updates to release checklist in Makefile.in.
 182   * Additions to the test-example suite.
 183
 184  -- Ian Jackson <ijackson@chiark.greenend.org.uk>  Thu, 01 May 2014 19:02:56 +0100
 185
 186 secnet (0.3.0) unstable; urgency=low
 187
 188   * Release of 0.3.0.  No code changes since 0.3.0~beta3.
 189   * Update release checklist.
 190
 191  -- Ian Jackson <ijackson@chiark.greenend.org.uk>  Sun, 01 Sep 2013 20:27:48 +0100
 192
 193 secnet (0.3.0~beta3) unstable; urgency=low
 194
 195   * New upstream version.
 196    - Stability bugfix: properly initialise site's scratch buffer.
 197
 198  -- Ian Jackson <ijackson@chiark.greenend.org.uk>  Mon, 05 Aug 2013 11:54:09 +0100
 199
 200 secnet (0.3.0~beta2) unstable; urgency=low
 201
 202   * New upstream version.
 203    - SECURITY FIX: RSA public modulus and exponent buffer overflow.
 204    - SECURITY FIX: Use constant-time memcmp for message authentication.
 205    - SECURITY FIX: Provide a new transform, eax-serpent, to replace cbcmac.
 206    - SECURITY FIX: No longer send NAKs for NAKs, avoiding NAK storm.
 207    - SECURITY FIX: Fix site name checking when site name A is prefix of B.
 208    - SECURITY FIX: Safely reject too-short IP packets.
 209    - Better robustness for mobile sites (proper user of NAKs, new PROD msg).
 210    - Better robustness against SLIP decoding errors.
 211    - Fix bugs which caused routes to sometimes not be advertised.
 212    - Protocol capability negotiation mechanism.
 213    - Improvements and fixes to protocol and usage documentation.
 214    - Other bugfixes and code tidying up.
 215
 216  -- Ian Jackson <ijackson@chiark.greenend.org.uk>  Thu, 25 Jul 2013 18:26:01 +0100
 217
 218 secnet (0.3.0~beta1) unstable; urgency=low
 219
 220   * New upstream version.
 221    - SECURITY FIX: avoid crashes (or buffer overrun) on short packets.
 222    - Bugfixes relating to packet loss during key exchange.
 223    - Bugfixes relating to link up/down status.
 224    - Bugfixes relating to logging.
 225    - make-secnet-sites made more sophisticated to support two vpns on chiark.
 226    - Documentation improvements.
 227    - Build system improvements.
 228   * Debian packaging improvements:
 229    - Native package.
 230    - Maintainer / uploaders.
 231    - init script requires $remove_fs since we're in /usr.
 232
 233  -- Ian Jackson <ijackson@chiark.greenend.org.uk>  Thu, 12 Jul 2012 20:18:16 +0100
 234
 235 secnet (0.2.1-1) unstable; urgency=low
 236
 237   * New upstream version.  (authbind endianness fix)
 238
 239  -- Ian Jackson <ijackson@chiark.greenend.org.uk>  Sun, 11 Dec 2011 13:14:57 +0000
 240
 241 secnet (0.2.0-1) unstable; urgency=low
 242
 243   * New upstream version.
 244
 245  -- Ian Jackson <ijackson@chiark.greenend.org.uk>  Sat, 10 Dec 2011 22:44:41 +0000
 246
 247 secnet (0.1.18-1) unstable; urgency=low
 248
 249   * New upstream version.
 250
 251  -- Stephen Early <steve@greenend.org.uk>  Tue,  18 Mar 2008 17:45:00 +0000