mdw@git.distorted.org.uk Git - secnet/blob - debian/changelog

   1 secnet (0.4.2~) unstable; urgency=medium
   2
   3   Build etc. fixes:
   4   * Tolerate building from a git checkout, but with git not installed.
   5     (This can happen in chroots.)
   6
   7  -- Ian Jackson <ijackson@chiark.greenend.org.uk>  Sat, 25 Nov 2017 14:04:42 +0000
   8
   9 secnet (0.4.1) unstable; urgency=low
  10
  11   * Implement comm-info and dedicated-interface-addr feature, for
  12     benefit of hippotat.
  13   * Implement `keepalive' site option, to try to keep link always up.
  14   * When printing messages about dropping IPv6, do not print anything
  15     about ihl.  (Check the IP version field first!)
  16   * When turning on debug, turn on verbose too.
  17
  18  -- Ian Jackson <ijackson@chiark.greenend.org.uk>  Sat, 25 Nov 2017 13:36:41 +0000
  19
  20 secnet (0.4.0) unstable; urgency=low
  21
  22   Debugging improvements:
  23   * Packet-level debugging from site notes errors from transmit.
  24   * Report when transport peers updated as a result of transmit.
  25
  26  -- Ian Jackson <ijackson@chiark.greenend.org.uk>  Sat, 28 Feb 2015 15:03:00 +0000
  27
  28 secnet (0.4.0~beta2) unstable; urgency=low
  29
  30   Polypath bugfixes:
  31   * Ignore IPv6 Unique Local unicast addresses.
  32   * Skip "tentative" IPv6 local addresses.
  33   * Improve logging and debug output.
  34
  35   Portability fix:
  36   * Build where size_t is not compatible with int.
  37
  38   Build system and packaging fixes:
  39   * Makefile: support DESTDIR.
  40   * debian/rules: set DESTDIR (not prefix).
  41   * debian/rules: Support dpkg-buildflags.
  42   * Install ipaddrset.py and secnet.8 with correct permissions.
  43   * Fix check for <linux/if_tun.h> and git rid of our copy.
  44   * Use -lresolv only if inet_aton is not found otherwise.
  45   * Use -lnsl only if inet_ntoa is not found otherwise.
  46   * debian/rules: Provide build-arch and build-indep targets.
  47   * debian/rules: Do not run build for *-indep (!)
  48   * Makefile.in: Putative dual (backport and not) release build process doc.
  49
  50   Copyright updates:
  51   * Update to GPLv3.  Add missing copyright notices and credits.
  52   * Get rid of old FSF street address; use URL instead.
  53   * Remove obsolete LICENCE.txt (which was for snprintf reimplementation).
  54   * Remove obsolete references to Cendio (for old ipaddr.py).
  55
  56  -- Ian Jackson <ijackson@chiark.greenend.org.uk>  Sun, 28 Dec 2014 17:14:10 +0000
  57
  58 secnet (0.4.0~beta1) unstable; urgency=low
  59
  60   New features:
  61   * Support transport over IPv6.  (We do not yet carry IPv6 in the private
  62     network.)  IPv6 support depends on IPv6-capable adns (adns 1.5.x).
  63   * New polypath comm, which can duplicate packets so as to send them via
  64     multiple routes over the public network, for increased
  65     reliability/performance (but increased cost).  Currently Linux-only
  66     but should be fairly easy to port.
  67   * Support multiple public addresses for peers.
  68   * Discard previously-received packets (by default).
  69
  70   Logging improvements:
  71   * Report (each first) transmission and reception success and failure.
  72   * Log reason for DNS reolution failure.
  73   * Log unexpected kinds of death from userv.
  74   * Log authbind exit status as errno value (if appropriate).
  75
  76   Configuration adjustments:
  77   * Adjust default number of mobile peer addresses to store when a peer
  78     public address is also configured.
  79   * Make specifying peer public port optional.  This avoids making special
  80     arrangements to bind to a port for in mobile sites with no public
  81     stable address.
  82
  83   Bugfixes:
  84   * Hackypar children will die if they get a terminating signal.
  85   * Fix signal dispositions inherited by secnet's child processes.
  86   * Fix off-by-one error which prevented setting transport-peers-max to 5.
  87
  88   Test, build and internal improvements:
  89   * Use conventional IP address handling library ipaddr.py.
  90   * Provide a fuzzer for the slip decoder.
  91   * Build system improvements.
  92   * Many source code cleanups.
  93
  94  -- Ian Jackson <ijackson@chiark.greenend.org.uk>  Sun, 26 Oct 2014 15:28:31 +0000
  95
  96 secnet (0.3.4) unstable; urgency=low
  97
  98   SECURITY FIX:
  99   * The previous security fix to buffer handling was entirely wrong.  This
 100     one is better.  Thanks to Simon Tatham for the report and the patch.
 101
 102  -- Ian Jackson <ijackson@chiark.greenend.org.uk>  Mon, 22 Sep 2014 16:16:11 +0100
 103
 104 secnet (0.3.3) unstable; urgency=high
 105
 106   SECURITY FIXES:
 107   * Pass correct size argument to recvfrom.  This is a serious security
 108     problem which may be exploitable from outside the VPN.
 109   * Fix a memory leak in some error logging.
 110
 111   Other related fixes:
 112   * Two other latent bugs in buffer length handling found and fixed.
 113   * Non-critical stylistic improvements to buffer length handling, to make
 114     the code clearer and to assist audit.
 115
 116  -- Ian Jackson <ijackson@chiark.greenend.org.uk>  Fri, 19 Sep 2014 23:50:45 +0100
 117
 118 secnet (0.3.3~beta1) unstable; urgency=low
 119
 120   Installation compatibility fix:
 121   * In make-secnet-sites, always use our own ipaddr.py even if the
 122     incompatible modern ipaddr.py is installed (eg via python-ipaddr.deb).
 123     (Future versions of secnet are going to need that Python module to be
 124     installed.)
 125
 126   For links involving mobile sites:
 127   * Use source of NAK packets as hint for peer transport address.
 128   * When initiating rekey, make use of data transport peer addresses.
 129
 130   Build fix:
 131   * Provide clean target in test-example/Makefile.
 132
 133  -- Ian Jackson <ijackson@chiark.greenend.org.uk>  Fri, 19 Sep 2014 00:11:44 +0100
 134
 135 secnet (0.3.2) unstable; urgency=low
 136
 137   * Release of 0.3.2.  No code changes since 0.3.1~beta1.
 138
 139  -- Ian Jackson <ijackson@chiark.greenend.org.uk>  Thu, 26 Jun 2014 20:27:58 +0100
 140
 141 secnet (0.3.2~beta1) unstable; urgency=low
 142
 143   For links involving mobile sites:
 144   * SECURITY: Properly update peer address array when it is full.
 145   * Do name-resolution on peer-initiated key setup too, when we are mobile
 146     (and other name-resolution improvements).
 147
 148   Other minor improvements:
 149   * Log peer addresses on key exchange timeout.
 150   * When printing version (eg during startup), use value from git-describe
 151     and thus include git commit id where applicable.
 152   * Updates to release checklist in Makefile.in.
 153   * Use C99 _Bool for bool_t.
 154
 155  -- Ian Jackson <ijackson@chiark.greenend.org.uk>  Fri, 06 Jun 2014 01:17:54 +0100
 156
 157 secnet (0.3.1) unstable; urgency=low
 158
 159   * Release of 0.3.1.  No code changes since 0.3.1~beta3.
 160
 161  -- Ian Jackson <ijackson@chiark.greenend.org.uk>  Thu, 15 May 2014 01:08:30 +0100
 162
 163 secnet (0.3.1~beta3) unstable; urgency=low
 164
 165   * Build fixes for non-i386 architectures and gcc 4.8.2.
 166
 167  -- Ian Jackson <ijackson@chiark.greenend.org.uk>  Thu, 08 May 2014 19:53:43 +0100
 168
 169 secnet (0.3.1~beta2) unstable; urgency=low
 170
 171   Fix relating to new fragmentation / ICMP functionality:
 172   * Generate ICMP packets correctly in point-to-point configurations.
 173
 174  -- Ian Jackson <ijackson@chiark.greenend.org.uk>  Sat, 03 May 2014 18:58:09 +0100
 175
 176 secnet (0.3.1~beta1) unstable; urgency=low
 177
 178   Security fixes (vulnerabilities are to inside attackers only):
 179   * SECURITY: Fixes to MTU and fragmentation handling.
 180   * SECURITY: Correctly set "unused" ICMP header field.
 181   * SECURITY: Fix IP length check not to crash on very short packets.
 182
 183   New feature:
 184   * Make the inter-site MTU configurable, and negotiate it with the peer.
 185
 186   Bugfixes etc.:
 187   * Fix netlink SEGV on clientless netlinks (i.e. configuration error).
 188   * Fix formatting error in p-t-p startup message.
 189   * Do not send ICMP errors in response to unknown incoming ICMP.
 190   * Fix formatting error in secnet.8 manpage.
 191   * Internal code rearrangements and improvements.
 192
 193   Packaging improvements:
 194   * Updates to release checklist in Makefile.in.
 195   * Additions to the test-example suite.
 196
 197  -- Ian Jackson <ijackson@chiark.greenend.org.uk>  Thu, 01 May 2014 19:02:56 +0100
 198
 199 secnet (0.3.0) unstable; urgency=low
 200
 201   * Release of 0.3.0.  No code changes since 0.3.0~beta3.
 202   * Update release checklist.
 203
 204  -- Ian Jackson <ijackson@chiark.greenend.org.uk>  Sun, 01 Sep 2013 20:27:48 +0100
 205
 206 secnet (0.3.0~beta3) unstable; urgency=low
 207
 208   * New upstream version.
 209    - Stability bugfix: properly initialise site's scratch buffer.
 210
 211  -- Ian Jackson <ijackson@chiark.greenend.org.uk>  Mon, 05 Aug 2013 11:54:09 +0100
 212
 213 secnet (0.3.0~beta2) unstable; urgency=low
 214
 215   * New upstream version.
 216    - SECURITY FIX: RSA public modulus and exponent buffer overflow.
 217    - SECURITY FIX: Use constant-time memcmp for message authentication.
 218    - SECURITY FIX: Provide a new transform, eax-serpent, to replace cbcmac.
 219    - SECURITY FIX: No longer send NAKs for NAKs, avoiding NAK storm.
 220    - SECURITY FIX: Fix site name checking when site name A is prefix of B.
 221    - SECURITY FIX: Safely reject too-short IP packets.
 222    - Better robustness for mobile sites (proper user of NAKs, new PROD msg).
 223    - Better robustness against SLIP decoding errors.
 224    - Fix bugs which caused routes to sometimes not be advertised.
 225    - Protocol capability negotiation mechanism.
 226    - Improvements and fixes to protocol and usage documentation.
 227    - Other bugfixes and code tidying up.
 228
 229  -- Ian Jackson <ijackson@chiark.greenend.org.uk>  Thu, 25 Jul 2013 18:26:01 +0100
 230
 231 secnet (0.3.0~beta1) unstable; urgency=low
 232
 233   * New upstream version.
 234    - SECURITY FIX: avoid crashes (or buffer overrun) on short packets.
 235    - Bugfixes relating to packet loss during key exchange.
 236    - Bugfixes relating to link up/down status.
 237    - Bugfixes relating to logging.
 238    - make-secnet-sites made more sophisticated to support two vpns on chiark.
 239    - Documentation improvements.
 240    - Build system improvements.
 241   * Debian packaging improvements:
 242    - Native package.
 243    - Maintainer / uploaders.
 244    - init script requires $remove_fs since we're in /usr.
 245
 246  -- Ian Jackson <ijackson@chiark.greenend.org.uk>  Thu, 12 Jul 2012 20:18:16 +0100
 247
 248 secnet (0.2.1-1) unstable; urgency=low
 249
 250   * New upstream version.  (authbind endianness fix)
 251
 252  -- Ian Jackson <ijackson@chiark.greenend.org.uk>  Sun, 11 Dec 2011 13:14:57 +0000
 253
 254 secnet (0.2.0-1) unstable; urgency=low
 255
 256   * New upstream version.
 257
 258  -- Ian Jackson <ijackson@chiark.greenend.org.uk>  Sat, 10 Dec 2011 22:44:41 +0000
 259
 260 secnet (0.1.18-1) unstable; urgency=low
 261
 262   * New upstream version.
 263
 264  -- Stephen Early <steve@greenend.org.uk>  Tue,  18 Mar 2008 17:45:00 +0000