debian/changelog: wip 0.4.x
[secnet] / debian / changelog
1 secnet (0.4.0~~iwj~) UNRELEASED; urgency=low
2
3 * wip.fuzz-slip-decoder branch
4 * wip.ipv6-3 branch
5 * wip.polypath branch
6
7 -- Ian Jackson <ijackson@chiark.greenend.org.uk> Thu, 09 Oct 2014 19:19:05 +0100
8
9 secnet (0.3.4) unstable; urgency=low
10
11 SECURITY FIX:
12 * The previous security fix to buffer handling was entirely wrong. This
13 one is better. Thanks to Simon Tatham for the report and the patch.
14
15 -- Ian Jackson <ijackson@chiark.greenend.org.uk> Mon, 22 Sep 2014 16:16:11 +0100
16
17 secnet (0.3.3) unstable; urgency=high
18
19 SECURITY FIXES:
20 * Pass correct size argument to recvfrom. This is a serious security
21 problem which may be exploitable from outside the VPN.
22 * Fix a memory leak in some error logging.
23
24 Other related fixes:
25 * Two other latent bugs in buffer length handling found and fixed.
26 * Non-critical stylistic improvements to buffer length handling, to make
27 the code clearer and to assist audit.
28
29 -- Ian Jackson <ijackson@chiark.greenend.org.uk> Fri, 19 Sep 2014 23:50:45 +0100
30
31 secnet (0.3.3~beta1) unstable; urgency=low
32
33 Installation compatibility fix:
34 * In make-secnet-sites, always use our own ipaddr.py even if the
35 incompatible modern ipaddr.py is installed (eg via python-ipaddr.deb).
36 (Future versions of secnet are going to need that Python module to be
37 installed.)
38
39 For links involving mobile sites:
40 * Use source of NAK packets as hint for peer transport address.
41 * When initiating rekey, make use of data transport peer addresses.
42
43 Build fix:
44 * Provide clean target in test-example/Makefile.
45
46 -- Ian Jackson <ijackson@chiark.greenend.org.uk> Fri, 19 Sep 2014 00:11:44 +0100
47
48 secnet (0.3.2) unstable; urgency=low
49
50 * Release of 0.3.2. No code changes since 0.3.1~beta1.
51
52 -- Ian Jackson <ijackson@chiark.greenend.org.uk> Thu, 26 Jun 2014 20:27:58 +0100
53
54 secnet (0.3.2~beta1) unstable; urgency=low
55
56 For links involving mobile sites:
57 * SECURITY: Properly update peer address array when it is full.
58 * Do name-resolution on peer-initiated key setup too, when we are mobile
59 (and other name-resolution improvements).
60
61 Other minor improvements:
62 * Log peer addresses on key exchange timeout.
63 * When printing version (eg during startup), use value from git-describe
64 and thus include git commit id where applicable.
65 * Updates to release checklist in Makefile.in.
66 * Use C99 _Bool for bool_t.
67
68 -- Ian Jackson <ijackson@chiark.greenend.org.uk> Fri, 06 Jun 2014 01:17:54 +0100
69
70 secnet (0.3.1) unstable; urgency=low
71
72 * Release of 0.3.1. No code changes since 0.3.1~beta3.
73
74 -- Ian Jackson <ijackson@chiark.greenend.org.uk> Thu, 15 May 2014 01:08:30 +0100
75
76 secnet (0.3.1~beta3) unstable; urgency=low
77
78 * Build fixes for non-i386 architectures and gcc 4.8.2.
79
80 -- Ian Jackson <ijackson@chiark.greenend.org.uk> Thu, 08 May 2014 19:53:43 +0100
81
82 secnet (0.3.1~beta2) unstable; urgency=low
83
84 Fix relating to new fragmentation / ICMP functionality:
85 * Generate ICMP packets correctly in point-to-point configurations.
86
87 -- Ian Jackson <ijackson@chiark.greenend.org.uk> Sat, 03 May 2014 18:58:09 +0100
88
89 secnet (0.3.1~beta1) unstable; urgency=low
90
91 Security fixes (vulnerabilities are to inside attackers only):
92 * SECURITY: Fixes to MTU and fragmentation handling.
93 * SECURITY: Correctly set "unused" ICMP header field.
94 * SECURITY: Fix IP length check not to crash on very short packets.
95
96 New feature:
97 * Make the inter-site MTU configurable, and negotiate it with the peer.
98
99 Bugfixes etc.:
100 * Fix netlink SEGV on clientless netlinks (i.e. configuration error).
101 * Fix formatting error in p-t-p startup message.
102 * Do not send ICMP errors in response to unknown incoming ICMP.
103 * Fix formatting error in secnet.8 manpage.
104 * Internal code rearrangements and improvements.
105
106 Packaging improvements:
107 * Updates to release checklist in Makefile.in.
108 * Additions to the test-example suite.
109
110 -- Ian Jackson <ijackson@chiark.greenend.org.uk> Thu, 01 May 2014 19:02:56 +0100
111
112 secnet (0.3.0) unstable; urgency=low
113
114 * Release of 0.3.0. No code changes since 0.3.0~beta3.
115 * Update release checklist.
116
117 -- Ian Jackson <ijackson@chiark.greenend.org.uk> Sun, 01 Sep 2013 20:27:48 +0100
118
119 secnet (0.3.0~beta3) unstable; urgency=low
120
121 * New upstream version.
122 - Stability bugfix: properly initialise site's scratch buffer.
123
124 -- Ian Jackson <ijackson@chiark.greenend.org.uk> Mon, 05 Aug 2013 11:54:09 +0100
125
126 secnet (0.3.0~beta2) unstable; urgency=low
127
128 * New upstream version.
129 - SECURITY FIX: RSA public modulus and exponent buffer overflow.
130 - SECURITY FIX: Use constant-time memcmp for message authentication.
131 - SECURITY FIX: Provide a new transform, eax-serpent, to replace cbcmac.
132 - SECURITY FIX: No longer send NAKs for NAKs, avoiding NAK storm.
133 - SECURITY FIX: Fix site name checking when site name A is prefix of B.
134 - SECURITY FIX: Safely reject too-short IP packets.
135 - Better robustness for mobile sites (proper user of NAKs, new PROD msg).
136 - Better robustness against SLIP decoding errors.
137 - Fix bugs which caused routes to sometimes not be advertised.
138 - Protocol capability negotiation mechanism.
139 - Improvements and fixes to protocol and usage documentation.
140 - Other bugfixes and code tidying up.
141
142 -- Ian Jackson <ijackson@chiark.greenend.org.uk> Thu, 25 Jul 2013 18:26:01 +0100
143
144 secnet (0.3.0~beta1) unstable; urgency=low
145
146 * New upstream version.
147 - SECURITY FIX: avoid crashes (or buffer overrun) on short packets.
148 - Bugfixes relating to packet loss during key exchange.
149 - Bugfixes relating to link up/down status.
150 - Bugfixes relating to logging.
151 - make-secnet-sites made more sophisticated to support two vpns on chiark.
152 - Documentation improvements.
153 - Build system improvements.
154 * Debian packaging improvements:
155 - Native package.
156 - Maintainer / uploaders.
157 - init script requires $remove_fs since we're in /usr.
158
159 -- Ian Jackson <ijackson@chiark.greenend.org.uk> Thu, 12 Jul 2012 20:18:16 +0100
160
161 secnet (0.2.1-1) unstable; urgency=low
162
163 * New upstream version. (authbind endianness fix)
164
165 -- Ian Jackson <ijackson@chiark.greenend.org.uk> Sun, 11 Dec 2011 13:14:57 +0000
166
167 secnet (0.2.0-1) unstable; urgency=low
168
169 * New upstream version.
170
171 -- Ian Jackson <ijackson@chiark.greenend.org.uk> Sat, 10 Dec 2011 22:44:41 +0000
172
173 secnet (0.1.18-1) unstable; urgency=low
174
175 * New upstream version.
176
177 -- Stephen Early <steve@greenend.org.uk> Tue, 18 Mar 2008 17:45:00 +0000