mdw@git.distorted.org.uk Git - secnet/blob - debian/changelog

   1 secnet (0.4.0~beta3) unstable; urgency=low
   2
   3   Debugging improvements:
   4   * Packet-level debugging from site notes errors from transmit.
   5
   6  --
   7
   8 secnet (0.4.0~beta2) unstable; urgency=low
   9
  10   Polypath bugfixes:
  11   * Ignore IPv6 Unique Local unicast addresses.
  12   * Skip "tentative" IPv6 local addresses.
  13   * Improve logging and debug output.
  14
  15   Portability fix:
  16   * Build where size_t is not compatible with int.
  17
  18   Build system and packaging fixes:
  19   * Makefile: support DESTDIR.
  20   * debian/rules: set DESTDIR (not prefix).
  21   * debian/rules: Support dpkg-buildflags.
  22   * Install ipaddrset.py and secnet.8 with correct permissions.
  23   * Fix check for <linux/if_tun.h> and git rid of our copy.
  24   * Use -lresolv only if inet_aton is not found otherwise.
  25   * Use -lnsl only if inet_ntoa is not found otherwise.
  26   * debian/rules: Provide build-arch and build-indep targets.
  27   * debian/rules: Do not run build for *-indep (!)
  28   * Makefile.in: Putative dual (backport and not) release build process doc.
  29
  30   Copyright updates:
  31   * Update to GPLv3.  Add missing copyright notices and credits.
  32   * Get rid of old FSF street address; use URL instead.
  33   * Remove obsolete LICENCE.txt (which was for snprintf reimplementation).
  34   * Remove obsolete references to Cendio (for old ipaddr.py).
  35
  36  -- Ian Jackson <ijackson@chiark.greenend.org.uk>  Sun, 28 Dec 2014 17:14:10 +0000
  37
  38 secnet (0.4.0~beta1) unstable; urgency=low
  39
  40   New features:
  41   * Support transport over IPv6.  (We do not yet carry IPv6 in the private
  42     network.)  IPv6 support depends on IPv6-capable adns (adns 1.5.x).
  43   * New polypath comm, which can duplicate packets so as to send them via
  44     multiple routes over the public network, for increased
  45     reliability/performance (but increased cost).  Currently Linux-only
  46     but should be fairly easy to port.
  47   * Support multiple public addresses for peers.
  48   * Discard previously-received packets (by default).
  49
  50   Logging improvements:
  51   * Report (each first) transmission and reception success and failure.
  52   * Log reason for DNS reolution failure.
  53   * Log unexpected kinds of death from userv.
  54   * Log authbind exit status as errno value (if appropriate).
  55
  56   Configuration adjustments:
  57   * Adjust default number of mobile peer addresses to store when a peer
  58     public address is also configured.
  59   * Make specifying peer public port optional.  This avoids making special
  60     arrangements to bind to a port for in mobile sites with no public
  61     stable address.
  62
  63   Bugfixes:
  64   * Hackypar children will die if they get a terminating signal.
  65   * Fix signal dispositions inherited by secnet's child processes.
  66   * Fix off-by-one error which prevented setting transport-peers-max to 5.
  67
  68   Test, build and internal improvements:
  69   * Use conventional IP address handling library ipaddr.py.
  70   * Provide a fuzzer for the slip decoder.
  71   * Build system improvements.
  72   * Many source code cleanups.
  73
  74  -- Ian Jackson <ijackson@chiark.greenend.org.uk>  Sun, 26 Oct 2014 15:28:31 +0000
  75
  76 secnet (0.3.4) unstable; urgency=low
  77
  78   SECURITY FIX:
  79   * The previous security fix to buffer handling was entirely wrong.  This
  80     one is better.  Thanks to Simon Tatham for the report and the patch.
  81
  82  -- Ian Jackson <ijackson@chiark.greenend.org.uk>  Mon, 22 Sep 2014 16:16:11 +0100
  83
  84 secnet (0.3.3) unstable; urgency=high
  85
  86   SECURITY FIXES:
  87   * Pass correct size argument to recvfrom.  This is a serious security
  88     problem which may be exploitable from outside the VPN.
  89   * Fix a memory leak in some error logging.
  90
  91   Other related fixes:
  92   * Two other latent bugs in buffer length handling found and fixed.
  93   * Non-critical stylistic improvements to buffer length handling, to make
  94     the code clearer and to assist audit.
  95
  96  -- Ian Jackson <ijackson@chiark.greenend.org.uk>  Fri, 19 Sep 2014 23:50:45 +0100
  97
  98 secnet (0.3.3~beta1) unstable; urgency=low
  99
 100   Installation compatibility fix:
 101   * In make-secnet-sites, always use our own ipaddr.py even if the
 102     incompatible modern ipaddr.py is installed (eg via python-ipaddr.deb).
 103     (Future versions of secnet are going to need that Python module to be
 104     installed.)
 105
 106   For links involving mobile sites:
 107   * Use source of NAK packets as hint for peer transport address.
 108   * When initiating rekey, make use of data transport peer addresses.
 109
 110   Build fix:
 111   * Provide clean target in test-example/Makefile.
 112
 113  -- Ian Jackson <ijackson@chiark.greenend.org.uk>  Fri, 19 Sep 2014 00:11:44 +0100
 114
 115 secnet (0.3.2) unstable; urgency=low
 116
 117   * Release of 0.3.2.  No code changes since 0.3.1~beta1.
 118
 119  -- Ian Jackson <ijackson@chiark.greenend.org.uk>  Thu, 26 Jun 2014 20:27:58 +0100
 120
 121 secnet (0.3.2~beta1) unstable; urgency=low
 122
 123   For links involving mobile sites:
 124   * SECURITY: Properly update peer address array when it is full.
 125   * Do name-resolution on peer-initiated key setup too, when we are mobile
 126     (and other name-resolution improvements).
 127
 128   Other minor improvements:
 129   * Log peer addresses on key exchange timeout.
 130   * When printing version (eg during startup), use value from git-describe
 131     and thus include git commit id where applicable.
 132   * Updates to release checklist in Makefile.in.
 133   * Use C99 _Bool for bool_t.
 134
 135  -- Ian Jackson <ijackson@chiark.greenend.org.uk>  Fri, 06 Jun 2014 01:17:54 +0100
 136
 137 secnet (0.3.1) unstable; urgency=low
 138
 139   * Release of 0.3.1.  No code changes since 0.3.1~beta3.
 140
 141  -- Ian Jackson <ijackson@chiark.greenend.org.uk>  Thu, 15 May 2014 01:08:30 +0100
 142
 143 secnet (0.3.1~beta3) unstable; urgency=low
 144
 145   * Build fixes for non-i386 architectures and gcc 4.8.2.
 146
 147  -- Ian Jackson <ijackson@chiark.greenend.org.uk>  Thu, 08 May 2014 19:53:43 +0100
 148
 149 secnet (0.3.1~beta2) unstable; urgency=low
 150
 151   Fix relating to new fragmentation / ICMP functionality:
 152   * Generate ICMP packets correctly in point-to-point configurations.
 153
 154  -- Ian Jackson <ijackson@chiark.greenend.org.uk>  Sat, 03 May 2014 18:58:09 +0100
 155
 156 secnet (0.3.1~beta1) unstable; urgency=low
 157
 158   Security fixes (vulnerabilities are to inside attackers only):
 159   * SECURITY: Fixes to MTU and fragmentation handling.
 160   * SECURITY: Correctly set "unused" ICMP header field.
 161   * SECURITY: Fix IP length check not to crash on very short packets.
 162
 163   New feature:
 164   * Make the inter-site MTU configurable, and negotiate it with the peer.
 165
 166   Bugfixes etc.:
 167   * Fix netlink SEGV on clientless netlinks (i.e. configuration error).
 168   * Fix formatting error in p-t-p startup message.
 169   * Do not send ICMP errors in response to unknown incoming ICMP.
 170   * Fix formatting error in secnet.8 manpage.
 171   * Internal code rearrangements and improvements.
 172
 173   Packaging improvements:
 174   * Updates to release checklist in Makefile.in.
 175   * Additions to the test-example suite.
 176
 177  -- Ian Jackson <ijackson@chiark.greenend.org.uk>  Thu, 01 May 2014 19:02:56 +0100
 178
 179 secnet (0.3.0) unstable; urgency=low
 180
 181   * Release of 0.3.0.  No code changes since 0.3.0~beta3.
 182   * Update release checklist.
 183
 184  -- Ian Jackson <ijackson@chiark.greenend.org.uk>  Sun, 01 Sep 2013 20:27:48 +0100
 185
 186 secnet (0.3.0~beta3) unstable; urgency=low
 187
 188   * New upstream version.
 189    - Stability bugfix: properly initialise site's scratch buffer.
 190
 191  -- Ian Jackson <ijackson@chiark.greenend.org.uk>  Mon, 05 Aug 2013 11:54:09 +0100
 192
 193 secnet (0.3.0~beta2) unstable; urgency=low
 194
 195   * New upstream version.
 196    - SECURITY FIX: RSA public modulus and exponent buffer overflow.
 197    - SECURITY FIX: Use constant-time memcmp for message authentication.
 198    - SECURITY FIX: Provide a new transform, eax-serpent, to replace cbcmac.
 199    - SECURITY FIX: No longer send NAKs for NAKs, avoiding NAK storm.
 200    - SECURITY FIX: Fix site name checking when site name A is prefix of B.
 201    - SECURITY FIX: Safely reject too-short IP packets.
 202    - Better robustness for mobile sites (proper user of NAKs, new PROD msg).
 203    - Better robustness against SLIP decoding errors.
 204    - Fix bugs which caused routes to sometimes not be advertised.
 205    - Protocol capability negotiation mechanism.
 206    - Improvements and fixes to protocol and usage documentation.
 207    - Other bugfixes and code tidying up.
 208
 209  -- Ian Jackson <ijackson@chiark.greenend.org.uk>  Thu, 25 Jul 2013 18:26:01 +0100
 210
 211 secnet (0.3.0~beta1) unstable; urgency=low
 212
 213   * New upstream version.
 214    - SECURITY FIX: avoid crashes (or buffer overrun) on short packets.
 215    - Bugfixes relating to packet loss during key exchange.
 216    - Bugfixes relating to link up/down status.
 217    - Bugfixes relating to logging.
 218    - make-secnet-sites made more sophisticated to support two vpns on chiark.
 219    - Documentation improvements.
 220    - Build system improvements.
 221   * Debian packaging improvements:
 222    - Native package.
 223    - Maintainer / uploaders.
 224    - init script requires $remove_fs since we're in /usr.
 225
 226  -- Ian Jackson <ijackson@chiark.greenend.org.uk>  Thu, 12 Jul 2012 20:18:16 +0100
 227
 228 secnet (0.2.1-1) unstable; urgency=low
 229
 230   * New upstream version.  (authbind endianness fix)
 231
 232  -- Ian Jackson <ijackson@chiark.greenend.org.uk>  Sun, 11 Dec 2011 13:14:57 +0000
 233
 234 secnet (0.2.0-1) unstable; urgency=low
 235
 236   * New upstream version.
 237
 238  -- Ian Jackson <ijackson@chiark.greenend.org.uk>  Sat, 10 Dec 2011 22:44:41 +0000
 239
 240 secnet (0.1.18-1) unstable; urgency=low
 241
 242   * New upstream version.
 243
 244  -- Stephen Early <steve@greenend.org.uk>  Tue,  18 Mar 2008 17:45:00 +0000