infra: Expunge revision history clutter.

[mdwtools] / mdwmath.dtx

% \begin{meta-comment}
%
% $Id: mdwmath.dtx,v 1.2 2003/09/05 16:14:36 mdw Exp $
%
% Various nicer mathematical things
%
% (c) 2003 Mark Wooding
%
% \end{meta-comment}
%
% \begin{meta-comment} <general public licence>
%%
%% mdwmath package -- various nicer mathematical things
%% Copyright (c) 2003 Mark Wooding
%%
%% This program is free software; you can redistribute it and/or modify
%% it under the terms of the GNU General Public License as published by
%% the Free Software Foundation; either version 2 of the License, or
%% (at your option) any later version.
%%
%% This program is distributed in the hope that it will be useful,
%% but WITHOUT ANY WARRANTY; without even the implied warranty of
%% MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
%% GNU General Public License for more details.
%%
%% You should have received a copy of the GNU General Public License
%% along with this program; if not, write to the Free Software
%% Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA.
%%
% \end{meta-comment}
%
% \begin{meta-comment} <Package preamble>
%<+package>\NeedsTeXFormat{LaTeX2e}
%<+package>\ProvidesPackage{mdwmath}
%<+package>                [2003/08/25 1.3 Nice mathematical things]
%<+oldeqnarray>\NeedsTeXFormat{LaTeX2e}
%<+oldeqnarray>\ProvidesPackage{eqnarray}
%<+oldeqnarray>                [1996/04/11 1.1 Old enhanced eqnarray]
% \end{meta-comment}
%
% \CheckSum{729}
%% \CharacterTable
%%  {Upper-case    \A\B\C\D\E\F\G\H\I\J\K\L\M\N\O\P\Q\R\S\T\U\V\W\X\Y\Z
%%   Lower-case    \a\b\c\d\e\f\g\h\i\j\k\l\m\n\o\p\q\r\s\t\u\v\w\x\y\z
%%   Digits        \0\1\2\3\4\5\6\7\8\9
%%   Exclamation   \!     Double quote  \"     Hash (number) \#
%%   Dollar        \$     Percent       \%     Ampersand     \&
%%   Acute accent  \'     Left paren    \(     Right paren   \)
%%   Asterisk      \*     Plus          \+     Comma         \,
%%   Minus         \-     Point         \.     Solidus       \/
%%   Colon         \:     Semicolon     \;     Less than     \<
%%   Equals        \=     Greater than  \>     Question mark \?
%%   Commercial at \@     Left bracket  \[     Backslash     \\
%%   Right bracket \]     Circumflex    \^     Underscore    \_
%%   Grave accent  \`     Left brace    \{     Vertical bar  \|
%%   Right brace   \}     Tilde         \~}
%%
%
% \begin{meta-comment}
%
%<*driver>
\input{mdwtools}
\let\opmod\pmod
\usepackage{amssymb}
\describespackage{mdwmath}
%\describespackage{eqnarray}
\ignoreenv{old-eqnarray}
%\unignoreenv{old-eqnarray}
\mdwdoc
%</driver>
%
% \end{meta-comment}
%
% \section{User guide}
%
% \subsection{Square root typesetting}
%
% \DescribeMacro{\sqrt}
% The package supplies a star variant of the |\sqrt| command which omits the
% vinculum over the operand (the line over the top).  While this is most
% useful in simple cases like $\sqrt*{2}$ it works for any size of operand.
% The package also re-implements the standard square root command so that it
% positions the root number rather better.
%
% \begin{figure}
% \begin{demo}[w]{Examples of the new square root command}
%\[ \sqrt*{2} \quad \mbox{rather than} \quad \sqrt{2} \]
%\[ \sqrt*[3]{2} \quad \mbox{ rather than } \quad \sqrt[3]{2} \]
%\[ \sqrt{x^3 + \sqrt*[y]{\alpha}} - \sqrt*[n+1]{a} \]
%\[ x = \sqrt*[3]{\frac{3y}{7}} \]
%\[ q = \frac{2\sqrt*{2}}{5}+\sqrt[\frac{n+1}{2}]{2x^2+3xy-y^2} \]
% \end{demo}
% \end{figure}
%
% [Note that omission of the vinculum was originally a cost-cutting exercise
% because the radical symbol can just fit in next to its operand and
% everything ends up being laid out along a line.  However, I find that the
% square root without vinculum is less cluttered, so I tend to use it when
% it doesn't cause ambiguity.]
%
% \subsection{Modular arithmetic}
%
% In standard maths mode, there's too much space before the parentheses in
% the output of the |\pmod| command.  Suppose that $x \equiv y^2 \opmod n$:
% then the spacing looks awful.  Go on, admit it.
%
% It looks OK in a display.  For example, if
% \[ c \equiv m^e \opmod n \]
% then it's fine.  The package redefines the |\pmod| command to do something
% more sensible.  So now $c^d \equiv m^{ed} \equiv m \pmod n$ and all looks
% fine.
%
% \subsection{Some maths symbols you already have}
%
% \DescribeMacro\bitor
% \DescribeMacro\bitand
% \DescribeMacro\dblor
% \DescribeMacro\dbland
% Having just tried to do some simple things, I've found that there are maths
% symbols missing.  Here they are, in all their glory:
% \begin{center} \unverb\| \begin{tabular}{cl|cl|cl}
% $\&$ & "\&"		& $\bitor$ & "\bitor"	& $\dbland$ & "\dbland" \\
% $\bitand$ & "\bitand"	& $\dblor$ & "\dblor"	& 
% \end{tabular} \end{center}
%
% \DescribeMacro\xor
% \DescribeMacro\cat
% I also set up the |\xor| command to typeset `$\xor$', which is commonly
% used to represent the bitsize exclusive-or operation among cryptographers.
% The command |\cat| typesets `$\cat$', which is a common operator indicating
% concatenation of strings.
%
% \DescribeMacro\lsl
% \DescribeMacro\lsr
% \DescribeMacro\rol
% \DescribeMacro\ror
% The commands |\lsl| and |\lsr| typeset binary operators `$\lsl$' and
% `$\lsr$' respectively, and |\rol| and |\ror| typeset `$\rol$' and `$\ror$'.
% Note that these are spaced as binary operators, rather than relations.
%
% \DescribeMacro\compose
% \DescribeMacro\implies
% \DescribeMacro\vect
% The |\compose| command typesets `$\compose$', which is usually used to
% denote function composition.  The |\implies| command is made to typeset
% `$\implies$'.  And \syntax{"\\vect{"<x>"}"} typesets `$\vect{x}$'.
%
% \DescribeMacro\statclose
% \DescribeMacro\compind
% The |\statclose| command typesets `$\statclose$', which indicates
% `statistical closeness' of probability distributions; |\compind| typesets
% `$\compind$', which indicates computational indistinguishability.
%
% \subsection{Fractions}
%
% \DescribeMacro\fracdef
% We provide a general fraction system, a little tiny bit like
% \package{amsmath}'s |\genfrac|.  Say
% \syntax{"\\fracdef{"<name>"}{"<frac-params>"}"} to define a new
% |\frac|-like operator.  The \<frac-params> are a comma-separated list of
% parameters:
% \begin{description}
% \item[\lit*{line}] Include a horizontal line between the top and bottom
%   (like |\frac|).
% \item[\lit*{line=}\<length>] Include a horizontal line with width
%   \<length>.
% \item[\lit*{noline}] Don't include a line (like |\binom|).
% \item[\lit*{leftdelim=}\<delim>] Use \<delim> as the left-hand delimiter.
% \item[\lit*{rightdelim=}\<delim>] Use \<delim> as the right-hand delimiter.
% \item[\lit*{nodelims}] Don't include delimiters.
% \item[\lit*{style=}\<style>] Typeset the fraction in \<style>, which is one
%   of |display|, |text|, |script| or |scriptscript|.
% \item[\lit*{style}] Use the prevailing style for the fraction.
% \item[\lit*{innerstyle=}\<style>] Typeset the \emph{components} of the
%   fraction in \<style>.
% \item[\lit*{innerstyle}] Typeset the fraction components according to the
%   prevailing style.
% \end{description}
% The commands created by |\fracdef| have the following syntax:
% \syntax{<name>"["<frac-params>"]{"<top>"}{"<bottom>"}"}.  Thus, you can use
% the optional argument to `tweak' the fraction if necessary.  This isn't
% such a good idea to do often.
%
% \DescribeMacro\frac
% \DescribeMacro\binom
% \DescribeMacro\jacobi
% The macros |\frac|, |\binom| and |\jacobi| are defined using |\fracdef|.
% They typset $\frac{x}{y}$, $\binom{n}{k}$ and $\jacobi{x}{n}$ respectively.
% (The last may be of use to number theorists talking about Jacobi or
% Lagrange symbols.)
%
% By way of example, these commands were defined using
%\begin{verbatim}
%\fracdef\frac{nodelims, line}
%\fracdef\binom{leftdelim = (, rightdelim = ), noline}
%\fracdef\jacobi{leftdelim = (, rightdelim = ), line}
%\end{verbatim}
%
% \subsection{Rant about derivatives}
%
% \DescribeMacro\d
% There is a difference between UK and US typesetting of derivatives.
% Americans typeset
% \[ \frac{dy}{dx} \]
% while the British want
% \[ \frac{\d y}{\d x}. \]
% The command |\d| command is fixed to typeset a `$\d$'.  (In text mode,
% |\d{x}| still typesets `\d{x}'.)
%
% \subsection{New operator names}
%
% \DescribeMacro\keys
% \DescribeMacro\dom
% \DescribeMacro\ran
% \DescribeMacro\supp
% \DescribeMacro\lcm
% \DescribeMacro\ord
% \DescribeMacro\poly
% \DescribeMacro\negl
% A few esoteric new operator names are supplied.
% \begin{center} \unverb\| \begin{tabular}{cl|cl|cl}
% $\keys$ & "\keys"	& $\dom$ & "\dom"	& $\ran$ & "\ran" \\
% $\supp$ & "\supp"	& $\lcm$ & "\lcm"       & $\ord$ & "\ord" \\
% $\poly$ & "\poly"	& $\negl$ & "\negl"
% \end{tabular} \end{center}
% I think |\lcm| ought to be self-explanatory.  The |\dom| and |\ran|
% operators pick out the domain and range of a function, respectively; thus,
% if $F\colon X \to Y$ is a function, then $\dom F = X$ and $\ran F = Y$.
% The \emph{support} of a probability distribution $\mathcal{D}$ is the set
% of objects with nonzero probability; i.e., $\supp{D} = \{\, x \in
% \dom\mathcal{D} \mid \mathcal{D}(x) > 0 \,\}$.  If $g \in G$ is a group
% element then $\ord g$ is the \emph{order} of $g$; i.e., the smallest
% positive integer $i$ where $g^i$ is the identity element, or $0$ if there
% is no such $i$.  $\poly(n)$ is some polynomial function of $n$.  A function
% $\nu(\cdot)$ is \emph{negligible} if, for every polynomial function
% $p(\cdot)$, there is an integer $N$ such that $\nu(n) < 1/p(n)$ for all $n
% > N$; $\negl(n)$ is some negligible function of $n$.
%
% \subsection{Standard set names}
%
% \DescribeMacro\Z
% \DescribeMacro\Q
% \DescribeMacro\R
% \DescribeMacro\C
% \DescribeMacro\N
% \DescribeMacro\F
% \DescribeMacro\powerset
% \DescribeMacro\gf
% If you have a |\mathbb| command defined, the following magic is revealed:
% \begin{center} \unverb\| \begin{tabular}{cl|cl|cl}
% $\Z$ & "\Z" & $\Q$ & "\Q" & $\R$ & "\R" \\
% $\N$ & "\N" & $\F$ & "\F" & $\C$ & "\C"
% \end{tabular} \end{center}
% which are handy for various standard sets of things.  Also the |\powerset|
% command typesets `$\powerset$', and \syntax{"\\gf{"<q>"}"}, which by default
% typesets $\gf{\syntax{<q>}}$ but you might choose to have it set
% $\mathrm{GF}(\syntax{<q>})$ intead.
%
% \subsection{Biggles}
%
% \DescribeMacro\bbigg
% \DescribeMacro\bbiggl
% \DescribeMacro\bbiggr
% \DescribeMacro\bbiggm
% The |\bbigg| commands generalizes the Plain \TeX\ |\bigg| family of
% macros.  |\bbigg| produces an `ordinary' symbol; |\bbiggl| and |\bbiggr|
% produce left and right delimiters; and |\bbiggm| produces a relation.  They
% produce symbols whose size is related to the prevailing text size -- so
% they adjust correctly in chapter headings, for example.
%
% The syntax is straightforward:
% \syntax{"\\"<bigop>"["$a$"]{"$n$"}{"<delim>"}"}.  Describing it is a bit
% trickier.  The size is based on the current |\strut| height.  If |\strut|
% has a height of $h$ and a depth of $d$, then the delimiter produced has a
% height of $n \times (h + d + a)$.
%
% The old |\big| commands have been redefined in terms of |\bbigg|.
%
% \subsection{The `QED' symbol}
%
% \DescribeMacro\qed
% \DescribeMacro\qedrule
% For use in proofs of theorems, we provide a `QED' symbol which behaves well
% under bizarre line-splitting conditions.  To use it, just say |\qed|.  The
% little `\qedrule' symbol is available on its own, by saying |\qedrule|.
% This also sets |\qedsymbol| if it's not set already.
% \qed
%
% \begin{ignore}
% There used to be an eqnarray here, but that's migrated its way into the
% \package{mdwtab} package.  Maybe the original version, without dependency
% on \package{mdwtab} ought to be releasable separately.  I'll keep it around
% just in case.
%
% The following is the documentation for the original version.  There's an
% updated edition in \package{mdwtab}.
% \end{ignore}
%
% \begin{old-eqnarray}
%
% \subsection{A new \env{eqnarray} environment}
%
% \LaTeX's built-in \env{eqnarray} is horrible -- it puts far too much space
% between the items in the array.  This environment is rather nearer to the
% \env{amsmath} \env{align} environments, although rather less capable.
%
% \bigskip
% \DescribeEnv{eqnarray}
% {\synshorts
% \setbox0\hbox{"\\begin{eqnarray}["<preamble>"]" \dots "\\end{eqnarray}"}
% \leavevmode \hskip-\parindent \fbox{\box0}
% }
% \smallskip
%
% The new version of \env{eqnarray} tries to do everything which you really
% want it to.  The \synt{preamble} string allows you to define the column
% types in a vaguely similar way to the wonderful \env{tabular} environment.
% The types provided (and it's easy-ish to add more) are:
%
% \def\ch{\char`}
% \begin{description} \def\makelabel{\hskip\labelsep\normalfont\ttfamily}
% \item [r] Right aligned equation
% \item [c] Centre-aligned equation
% \item [l] Left aligned equation
% \item [\textrm{\texttt{Tr}, \texttt{Tc} and \texttt{Tl}}] Right, centre and
%       left aligned text (not maths)
% \item [L] Left aligned zero-width equation
% \item [x] Centred entire equation
% \item [:] Big gap separating sets of equations
% \item [q] Quad space
% \item [>\ch\{\synt{text}\ch\}] Insert text before column
% \item [<\ch\{\synt{text}\ch\}] Insert text after column
% \end{description}
%
% Some others are also defined: don't use them because they do complicated
% things which are hard to explain and they aren't much use anyway.
%
% The default preamble, if you don't supply one of your own, is \lit{rcl}.
% Most of the time, \lit{rl} is sufficient, although compatibility is more
% important to me.
%
% By default, there is no space between columns, which makes formul\ae\ in an
% \env{eqnarray} environment look just like formul\ae\ typeset on their own,
% except that things get aligned in columns.  This is where the default
% \env{eqnarray} falls down: it leaves |\arraycolsep| space between each
% column making the thing look horrible.
%
% An example would be good here, I think.  This one's from exercise 22.9 of
% the \textit{\TeX book}.
%
% \begin{demo}[w]{Simultaneous equations}
%\begin{eqnarray}[rcrcrcrl]
%  10w & + &  3x & + & 3y & + & 18z & = 1 \\
%   6w & - & 17x &   &    & - &  5z & = 2
%\end{eqnarray}
% \end{demo}
%
% Choosing a more up-to-date example, here's one demonstrating the \lit{:}
% column specifier from the \textit{\LaTeX\ Companion}.
%
% \begin{demo}[w]{Lots of equations}
%\begin{eqnarray}[rl:rl:l]
% V_i &= v_i - q_i v_j,	& X_i &= x_i - q_i x_j,	&
%       U_i = u_i, \qquad \mbox{for $i \ne j$}  \label{eq:A} \\
% V_j &= v_j,           & X_j &= x_j            &
%       U_j u_j + \sum_{i \ne j} q_i u_i.
%\end{eqnarray}
% \end{demo}
%
% We can make things more interesting by adding a plain text column.  Here we
% go:
%
% \begin{demo}[w]{Plain text column}
%\begin{eqnarray}[rlqqTl]
%     x  &= y           & by (\ref{eq:A}) \\
%     x' &= y'          & by definition \\
% x + x' &= y + y'      & by Axiom~1
%\end{eqnarray}
% \end{demo}
%
% The new features also mean that you don't need to mess about with
% |\lefteqn| any more.  This is handled by the \lit{L} column type:
%
% \begin{demo}{Splitting example}
%\begin{eqnarray*}[Ll]
%   w+x+y+z = \\
%    & a+b+c+d+e+{} \\
%    & f+g+h+i+j
%\end{eqnarray*}
% \end{demo}
%
% Finally, just to prove that the spacing's right at last, here's another one
% from the \textit{Companion}.
%
% \begin{demo}{Spacing demonstration}
%\begin{equation}
%  x^2 + y^2 = z^2
%\end{equation}
%\begin{eqnarray}[rl]
%  x^2 + y^2 &= z^2 \\
%        y^2 &< z^2
%\end{eqnarray}
% \end{demo}
%
% Well, that was easy enough.  Now on to numbering.  As you've noticed, the
% equations above are numbered.  You can use the \env{eqnarray$*$}
% environment to turn off the numbering in the whole environment, or say
% |\nonumber| on a line to suppress numbering of that one in particular.
% More excitingly, you can say \syntax{"\\nonumber["<text>"]"} to choose
% what text to display.
%
% A note for cheats: you can use the sparkly new \env{eqnarray} for simple
% equations simply by specifying \lit{x} as the column description.  Who
% needs \AmSTeX? |;-)|
%
% \end{old-eqnarray}
%
% \implementation
%
% \section{Implementation}
%
% This isn't really complicated (honest) although it is a lot hairier than I
% think it ought to be.
%
%    \begin{macrocode}
%<*package>
\RequirePackage{amssymb}
\RequirePackage{mdwkey}
%    \end{macrocode}
%
% \subsection{Square roots}
%
% \subsubsection{Where is the square root sign?}
%
% \LaTeX\ hides the square root sign away somewhere without telling anyone
% where it is.  I extract it forcibly by peeking inside the |\sqrtsign| macro
% and scrutinising the contents.  Here we go: prepare for yukkiness.
%
%    \begin{macrocode}
\newcount\sq@sqrt \begingroup \catcode`\|0 \catcode`\\12
|def|sq@readrad#1"#2\#3|relax{|global|sq@sqrt"#2|relax}
|expandafter|sq@readrad|meaning|sqrtsign|relax |endgroup
\def\sq@delim{\delimiter\sq@sqrt\relax}
%    \end{macrocode}
%
% \subsubsection{Drawing fake square root signs}
%
% \TeX\ absolutely insists on drawing square root signs with a vinculum over
% the top.  In order to get the same effect, we have to attempt to emulate
% \TeX's behaviour.
%
% \begin{macro}{\sqrtdel}
%
% This does the main job of typesetting a vinculum-free radical.\footnote{^^A
%   Note for chemists: this is nothing to do with short-lived things which
%   don't have their normal numbers of electrons.  And it won't reduce the
%   appearance of wrinkles either.}
% It's more or less a duplicate of what \TeX\ does internally, so it might be
% a good plan to have a copy of Appendix~G open while you examine this.
%
% We start off by using |\mathpalette| to help decide how big things should
% be.
%
%    \begin{macrocode}
\def\sqrtdel{\mathpalette\sqrtdel@i}
%    \end{macrocode}
%
% Read the contents of the radical into a box, so we can measure it.
%
%    \begin{macrocode}
\def\sqrtdel@i#1#2{%
  \setbox\z@\hbox{$\m@th#1#2$}% %%% Bzzzt -- uncramps the mathstyle
%    \end{macrocode}
%
% Now try and sort out the values needed in this calculation.  We'll assume
% that $\xi_8$ is 0.6\,pt, the way it usually is.  Next try to work out the
% value of $\varphi$.
%
%    \begin{macrocode}
  \ifx#1\displaystyle%
    \@tempdima1ex%
  \else%
    \@tempdima.6\p@%
  \fi%
%    \end{macrocode}
%
% That was easy.  Now for $\psi$.
%
%    \begin{macrocode}
  \@tempdimb.6\p@%
  \advance\@tempdimb.25\@tempdima%
%    \end{macrocode}
%
% Build the `delimiter' in a box of height $h(x)+d(x)+\psi+\xi_8$, as
% requested.  Box~2 will do well for this purpose.
%
%    \begin{macrocode}
  \dimen@.6\p@%
  \advance\dimen@\@tempdimb%
  \advance\dimen@\ht\z@%
  \advance\dimen@\dp\z@%
  \setbox\tw@\hbox{%
    $\left\sq@delim\vcenter to\dimen@{}\right.\n@space$%
  }%
%    \end{macrocode}
%
% Now we need to do some more calculating (don't you hate it?).  As far as
% Appendix~G is concerned, $\theta=h(y)=0$, because we want no rule over the
% top.  
%
%    \begin{macrocode}
  \@tempdima\ht\tw@%
  \advance\@tempdima\dp\tw@%
  \advance\@tempdima-\ht\z@%
  \advance\@tempdima-\dp\z@%
  \ifdim\@tempdima>\@tempdimb%
    \advance\@tempdima\@tempdimb%
    \@tempdimb.5\@tempdima%
  \fi%
%    \end{macrocode}
%
% Work out how high to raise the radical symbol.  Remember that Appendix~G
% thinks that the box has a very small height, although this is untrue here.
%
%    \begin{macrocode}
  \@tempdima\ht\z@%
  \advance\@tempdima\@tempdimb%
  \advance\@tempdima-\ht\tw@%
%    \end{macrocode}
%
% Build the output (finally).  The brace group is there to turn the output
% into a mathord, one of the few times that this is actually desirable.
%
%    \begin{macrocode}
  {\raise\@tempdima\box\tw@\vbox{\kern\@tempdimb\box\z@}}%
}
%    \end{macrocode}
%
% \end{macro}
%
% \subsubsection{The new square root command}
%
% This is where we reimplement all the square root stuff.  Most of this stuff
% comes from the \PlainTeX\ macros, although some is influenced by \AmSTeX\
% and \LaTeXe, and some is original.  I've tried to make the spacing vaguely
% automatic, so although it's not configurable like \AmSTeX's version, the
% output should look nice more of the time.  Maybe.
%
% \begin{macro}{\sqrt}
%
% \LaTeX\ says this must be robust, so we make it robust.  The first thing to
% do is to see if there's a star and pass the appropriate squareroot-drawing
% command on to the rest of the code.
%
%    \begin{macrocode}
\DeclareRobustCommand\sqrt{\@ifstar{\sqrt@i\sqrtdel}{\sqrt@i\sqrtsign}}
%    \end{macrocode}
%
% Now we can sort out an optional argument to be displayed on the root.
%
%    \begin{macrocode}
\def\sqrt@i#1{\@ifnextchar[{\sqrt@ii{#1}}{\sqrt@iv{#1}}}
%    \end{macrocode}
%
% Stages~2 and~3 below are essentially equivalents of \PlainTeX's
% |\root|\dots|\of| and |\r@@t|.  Here we also find the first wrinkle: the
% |\rootbox| used to store the number is spaced out on the left if necessary.
% There's a backspace after the end so that the root can slip underneath, and
% everything works out nicely.  Unfortunately size is fixed here, although
% doesn't actually seem to matter.
%
%    \begin{macrocode}
\def\sqrt@ii#1[#2]{%
  \setbox\rootbox\hbox{$\m@th\scriptscriptstyle{#2}$}%
  \ifdim\wd\rootbox<6\p@%
    \setbox\rootbox\hb@xt@6\p@{\hfil\unhbox\rootbox}%
  \fi%
  \mathpalette{\sqrt@iii{#1}}%
}
%    \end{macrocode}
%
% Now we can actually build everything.  Note that the root is raised by its
% depth -- this prevents a common problem with letters with descenders.
%
%    \begin{macrocode}
\def\sqrt@iii#1#2#3{%
  \setbox\z@\hbox{$\m@th#2#1{#3}$}%
  \dimen@\ht\z@%
  \advance\dimen@-\dp\z@%
  \dimen@.6\dimen@%
  \advance\dimen@\dp\rootbox%
  \mkern-3mu%
  \raise\dimen@\copy\rootbox%
  \mkern-10mu%
  \box\z@%
}
%    \end{macrocode}
%
% Finally handle a non-numbered root.  We read the rooted text in as an
% argument, to stop problems when people omit the braces.  (\AmSTeX\ does
% this too.)
%
%    \begin{macrocode}
\def\sqrt@iv#1#2{#1{#2}}
%    \end{macrocode}
%
% \end{macro}
%
% \begin{macro}{\root}
%
% We also re-implement \PlainTeX's |\root| command, just in case someone uses
% it, and supply a star-variant.  This is all very trivial.
%
%    \begin{macrocode}
\def\root{\@ifstar{\root@i\sqrtdel}{\root@i\sqrtsign}}
\def\root@i#1#2\of{\sqrt@ii{#1}[#2]}
%    \end{macrocode}
%
% \end{macro}
%
% \subsection{Modular programming}
%
% \begin{macro}{\pmod}
%
% Do some hacking if not |\ifouter|.
%
%    \begin{macrocode}
\def\pmod#1{%
  \ifinner\;\else\allowbreak\mkern18mu\fi%
  ({\operator@font mod}\,\,#1)%
}
%    \end{macrocode}
%
% \end{macro}
%
% \subsection{Some magic new maths characters}
%
% \begin{macro}{\bitor}
% \begin{macro}{\bitand}
% \begin{macro}{\dblor}
% \begin{macro}{\dbland}
% \begin{macro}{\xor}
% \begin{macro}{\lor}
% \begin{macro}{\ror}
% \begin{macro}{\lsl}
% \begin{macro}{\lsr}
%
% The new boolean operators.
%
%    \begin{macrocode}
\DeclareMathSymbol{&}{\mathbin}{operators}{`\&}
\DeclareMathSymbol{\bitand}{\mathbin}{operators}{`\&}
\def\bitor{\mathbin\mid}
\def\dblor{\mathbin{\mid\mid}}
\def\dbland{\mathbin{\mathrel\bitand\mathrel\bitand}}
\let\xor\oplus
\def\lsl{\mathbin{<\!\!<}}
\def\lsr{\mathbin{>\!\!>}}
\def\rol{\mathbin{<\!\!<\!\!<}}
\def\ror{\mathbin{>\!\!>\!\!>}}
\AtBeginDocument{\ifx\lll\@@undefined\else
  \def\lsl{\mathbin{\ll}}
  \def\lsr{\mathbin{\gg}}
  \def\rol{\mathbin{\lll}}
  \def\ror{\mathbin{\ggg}}
\fi}
%    \end{macrocode}
%
% \end{macro}
% \end{macro}
% \end{macro}
% \end{macro}
% \end{macro}
% \end{macro}
% \end{macro}
% \end{macro}
% \end{macro}
%
% \begin{macro}{\cat}
% \begin{macro}{\compose}
% \begin{macro}{\implies}
% \begin{macro}{\vect}
% \begin{macro}{\d}
% \begin{macro}{\jacobi}
%
% A mixed bag of stuff.
%
%    \begin{macrocode}
\def\cat{\mathbin{\|}}
\let\compose\circ
\def\implies{\Rightarrow}
\def\vect#1{\mathord{\mathbf{#1}}}
\def\d{%
  \ifmmode\mathord{\operator@font d}%
  \else\expandafter\a\expandafter d\fi%
}
\def\jacobi#1#2{{{#1}\overwithdelims()#2}}
%    \end{macrocode}
%
% \end{macro}
% \end{macro}
% \end{macro}
% \end{macro}
% \end{macro}
% \end{macro}
%
% \begin{macro}{\statclose}
% \begin{macro}{\compind}
%
% Fancy new relations for probability distributions.
%
%    \begin{macrocode}
\def\statclose{\mathrel{\mathop{=}\limits^{\scriptscriptstyle s}}}
\def\compind{\mathrel{\mathop{\approx}\limits^{\scriptscriptstyle c}}}
%    \end{macrocode}
%
% \end{macro}
% \end{macro}
%
% \begin{macro}{\keys}
% \begin{macro}{\dom}
% \begin{macro}{\ran}
% \begin{macro}{\supp}
% \begin{macro}{\lcm}
% \begin{macro}{\poly}
% \begin{macro}{\negl}
% \begin{macro}{\ord}
%
% And the new operator names.
%
%    \begin{macrocode}
\def\keys{\mathop{\operator@font keys}\nolimits}
\def\dom{\mathop{\operator@font dom}\nolimits}
\def\ran{\mathop{\operator@font ran}\nolimits}
\def\supp{\mathop{\operator@font supp}\nolimits}
\def\lcm{\mathop{\operator@font lcm}\nolimits}
\def\poly{\mathop{\operator@font poly}\nolimits}
\def\negl{\mathop{\operator@font negl}\nolimits}
\def\ord{\mathop{\operator@font ord}\nolimits}
%    \end{macrocode}
%
% \end{macro}
% \end{macro}
% \end{macro}
% \end{macro}
% \end{macro}
% \end{macro}
% \end{macro}
% \end{macro}
%
% \subsection{Fractions}
%
% \begin{macro}{\@frac@parse}
%
% \syntax{"\\@frac@parse{"<stuff>"}{"<frac-params>"}"} -- run \<stuff>
% passing it three arguments: an infix fraction-making command, the `outer'
% style, and the `inner' style.
%
% This is rather tricky.  We clear a load of parameters, parse the parameter
% list, and then build a token list containing the right stuff.  Without the
% token list fiddling, we end up expanding things at the wrong times -- for
% example, |\{| expands to something terribly unpleasant in a document
% preamble.
%
% All of the nastiness is contained in a group.
%
%    \begin{macrocode}
\def\@frac@parse#1#2{%
  \begingroup%
  \let\@wd\@empty\def\@ldel{.}\def\@rdel{.}%
  \def\@op{over}\let\@dim\@empty\@tempswafalse%
  \let\@is\@empty\let\@os\@empty%
  \mkparse{mdwmath:frac}{#2}%
  \toks\tw@{\endgroup#1}%
  \toks@\expandafter{\csname @@\@op\@wd\endcsname}%
  \if@tempswa%
    \toks@\expandafter{\the\expandafter\toks@\@ldel}%
    \toks@\expandafter{\the\expandafter\toks@\@rdel}%
  \fi%
  \expandafter\toks@\expandafter{\the\expandafter\toks@\@dim}%
  \toks@\expandafter{\the\toks\expandafter\tw@\expandafter{\the\toks@}}
  \toks@\expandafter{\the\expandafter\toks@\expandafter{\@os}}
  \toks@\expandafter{\the\expandafter\toks@\expandafter{\@is}}
  \the\toks@%
}
%    \end{macrocode}
%
% The keyword definitions are relatively straightforward now.  The error
% handling for \textsf{style} and \textsf{innerstyle} could do with
% improvement.
%
%    \begin{macrocode}
\def\@frac@del#1#2{\def\@wd{withdelims}\@tempswatrue\def#1{#2}}
\mkdef{mdwmath:frac}{leftdelim}{\@frac@del\@ldel{#1}}
\mkdef{mdwmath:frac}{rightdelim}{\@frac@del\@rdel{#1}}
\mkdef{mdwmath:frac}{nodelims}*{\let\@wd\@empty\@tempswafalse}
\mkdef{mdwmath:frac}{line}{%
  \def\@op{above}\setlength\dimen@{#1}\edef\@dim{\the\dimen@\space}%
}
\mkdef{mdwmath:frac}{line}*{\def\@op{over}\let\@dim\@empty}
\mkdef{mdwmath:frac}{noline}*{\def\@op{atop}\let\@dim\@empty}
\def\@frac@style#1#2{%
  \ifx\q@delim#2\q@delim\let#1\@empty%
  \else%
    \expandafter\ifx\csname #2style\endcsname\relax%
      \PackageError{mdwmath}{Bad maths style `#2'}\@ehc%
    \else%
      \edef#1{\csname#2style\endcsname}%
    \fi%
  \fi%
}
\mkdef{mdwmath:frac}{style}[]{\@frac@style\@os{#1}}
\mkdef{mdwmath:frac}{innerstyle}[]{\@frac@style\@is{#1}}
%    \end{macrocode}
%
% \end{macro}
%
% \begin{macro}{\fracdef}
%
% Here's where the rest of the pain is.  We do a preliminary parse of the
% parameters and `compile' the result into the output macro.  If there's no
% optional argument, then we don't need to do any really tedious formatting
% at the point of use.
%
%    \begin{macrocode}
\def\fracdef#1#2{\@frac@parse{\fracdef@i{#1}{#2}}{#2}}
\def\fracdef@i#1#2#3#4#5{\def#1{\@frac@do{#2}{#3}{#4}{#5}}}
\def\@frac@do#1#2#3#4{%
  \@ifnextchar[{\@frac@complex{#1}}{\@frac@simple{#2}{#3}{#4}}%
}
\def\@frac@complex#1[#2]{\@frac@parse\@frac@simple{#1,#2}}
\def\@frac@simple#1#2#3#4#5{{#2{{#3#4}#1{#3#5}}}}
%    \end{macrocode}
%
% \end{macro}
%
% \begin{macro}{\frac@fix}
% \begin{macro}{\@@over}
% \begin{macro}{\@@atop}
% \begin{macro}{\@@above}
% \begin{macro}{\@@overwithdelims}
% \begin{macro}{\@@atopwithdelims}
% \begin{macro}{\@@abovewithdelims}
%
% Finally, we need to fix up |\@@over| and friends.  Maybe \package{amsmath}
% has hidden the commands away somewhere unhelpful.  If not, we make the
% requisite copies.
%
%    \begin{macrocode}
\def\q@delim{\q@delim}
\def\frac@fix#1{\expandafter\frac@fix@i\string#1\q@delim}
\def\frac@fix@i#1#2\q@delim{\frac@fix@ii{#2}\frac@fix@ii{#2withdelims}}
\def\frac@fix@ii#1{%
  \expandafter\ifx\csname @@#1\endcsname\relax%
    \expandafter\let\csname @@#1\expandafter\endcsname\csname#1\endcsname%
  \fi%
}
\frac@fix\over \frac@fix\atop \frac@fix\above
%    \end{macrocode}
%
% \end{macro}
% \end{macro}
% \end{macro}
% \end{macro}
% \end{macro}
% \end{macro}
% \end{macro}
%
% \begin{macro}{\frac}
% \begin{macro}{\binom}
% \begin{macro}{\jacobi}
%
% And finally, we define the fraction-making commands.
%
%    \begin{macrocode}
\fracdef\frac{nodelims, line}
\fracdef\binom{leftdelim = (, rightdelim = ), noline}
\fracdef\jacobi{leftdelim = (, rightdelim = ), line}
%    \end{macrocode}
%
% \end{macro}
% \end{macro}
% \end{macro}
%
% \subsection{Blackboard bold stuff}
%
% \begin{macro}{\Z}
% \begin{macro}{\Q}
% \begin{macro}{\R}
% \begin{macro}{\C}
% \begin{macro}{\N}
% \begin{macro}{\F}
% \begin{macro}{\powerset}
% \begin{macro}{\gf}
%
% First of all, the signs.
%
%    \begin{macrocode}
\def\Z{\mathbb{Z}}
\def\Q{\mathbb{Q}}
\def\R{\mathbb{R}}
\def\C{\mathbb{C}}
\def\N{\mathbb{N}}
\def\F{\mathbb{F}}
\def\powerset{\mathbb{P}}
\def\gf#1{\F_{#1}}
%\def\gf#1{\mathrm{GF}({#1})}
%    \end{macrocode}
%
% \end{macro}
% \end{macro}
% \end{macro}
% \end{macro}
% \end{macro}
% \end{macro}
% \end{macro}
% \end{macro}
%
% And now, define |\mathbb| if it's not there already.
%
%    \begin{macrocode}
\AtBeginDocument{\ifx\mathbb\@@undefined\let\mathbb\mathbf\fi}
%    \end{macrocode}
%
% \subsection{Biggles}
%
% Now for some user-controlled delimiter sizing.  The standard bigness of
% plain \TeX's delimiters are all right, but it's a little limiting.
%
% The biggness of delimiters is based on the size of the current |\strut|,
% which \LaTeX\ keeps up to date all the time.  This will make the various
% delimiters grow in proportion when the text gets bigger.  Actually, I'm
% not sure that this is exactly right -- maybe it should be nonlinear,
%
% \begin{macro}{\bbigg}
% \begin{macro}{\bbiggl}
% \begin{macro}{\bbiggr}
% \begin{macro}{\bbiggm}
%
% This is where the bigness is done.  This is more similar to the plain \TeX\
% big delimiter stuff than to the \package{amsmath} stuff, although there's
% not really a lot of difference.
%
% The two arguments are a multiplier for the delimiter size, and a small
% increment applied \emph{before} the multiplication (which is optional).
%
% This is actually a front for a low-level interface which can be called
% directly for efficiency.
%
%    \begin{macrocode}
\def\bbigg{\@bbigg\mathord} \def\bbiggl{\@bbigg\mathopen}
\def\bbiggr{\@bbigg\mathclose} \def\bbiggm{\@bbigg\mathrel}
%    \end{macrocode}
%
% \end{macro}
% \end{macro}
% \end{macro}
% \end{macro}
%
% \begin{macro}{\@bbigg}
%
% This is an optional argument parser providing a front end for the main
% macro |\bbigg@|.
%
%    \begin{macrocode}
\def\@bbigg#1{\@ifnextchar[{\@bigg@i{#1}}{\@bigg@i{#1}[\z@]}}
\def\@bigg@i#1[#2]#3#4{#1{\bbigg@{#2}{#3}{#4}}}
%    \end{macrocode}
%
% \end{macro}
%
% \begin{macro}{\bbigg@}
%
% This is it, at last.  The arguments are as described above: an addition
% to be made to the strut height, and a multiplier.  Oh, and the delimiter,
% of course.
%
% This is a bit messy.  The smallest `big' delimiter, |\big|, is the same
% height as the current strut box.  Other delimiters are~$1\frac12$, $2$
% and~$2\frac12$ times this height.  I'll set the height of the delimiter by
% putting in a |\vcenter| of the appropriate size.
%
% Given an extra height~$x$, a multiplication factor~$f$ and a strut
% height~$h$ and depth~$d$, I'll create a vcenter with total height
% $f(h+d+x)$.  Easy, isn't it?
%
%    \begin{macrocode}
\def\bbigg@#1#2#3{%
  {\hbox{$%
    \dimen@\ht\strutbox\advance\dimen@\dp\strutbox%
    \advance\dimen@#1%
    \dimen@#2\dimen@%
    \left#3\vcenter to\dimen@{}\right.\n@space%
  $}}%
}
%    \end{macrocode}
%
% \end{macro}
%
% \begin{macro}{\big}
% \begin{macro}{\Big}
% \begin{macro}{\bigg}
% \begin{macro}{\Bigg}
%
% Now for the easy macros.
%
%    \begin{macrocode}
\def\big{\bbigg@\z@\@ne}
\def\Big{\bbigg@\z@{1.5}}
\def\bigg{\bbigg@\z@\tw@}
\def\Bigg{\bbigg@\z@{2.5}}
%    \end{macrocode}
%
% \end{macro}
% \end{macro}
% \end{macro}
% \end{macro}
%
% \subsection{The `QED' symbol}
%
% \begin{macro}{\qed}
% \begin{macro}{\qedrule}
% \begin{macro}{\qedsymbol}
%
% This is fairly simple.  Just be careful will the glue and penalties.  The
% size of the little box is based on the current font size.
%
% The horizontal list constructed by the macro is like this:
%
% \begin{itemize}
% \item A |\quad| of space.  This might get eaten if there's a break here or
%   before.  That's OK, though.
% \item An empty box, to break a run of discardable items.
% \item A |\penalty 10000| to ensure that the spacing glue isn't discarded.
% \item |\hfill| glue to push the little rule to the end of the line.
% \item A little square rule `\qedrule', with some small kerns around it.
% \item A glue item to counter the effect of glue added at the paragraph
%   boundary. 
% \end{itemize}
%
% The vertical mode case is simpler, but less universal.  It copes with
% relatively simple cases only.
%
% A |\qed| commend ends the paragraph.
%
%    \begin{macrocode}
\def\qed{%
  \ifvmode%
    \unskip%
    \setbox\z@\hb@xt@\linewidth{\hfil\strut\qedsymbol}%
    \prevdepth-\@m\p@%
    \ifdim\prevdepth>\dp\strutbox%
      \dimen@\prevdepth\advance\dimen@-\dp\strutbox%
      \kern-\dimen@%
    \fi%
    \penalty\@M\vskip-\baselineskip\box\z@%
  \else%
    \unskip%
    \penalty\@M\hfill%
    \hbox{}\penalty200\quad%
    \hbox{}\penalty\@M\hfill\qedsymbol\hskip-\parfillskip\par%
  \fi%
}
\def\qedrule{{%
  \dimen@\ht\strutbox%
  \advance\dimen@\dp\strutbox%
  \dimen@ii1ex%
  \advance\dimen@-\dimen@ii%
  \divide\dimen@\tw@%
  \advance\dimen@-\dp\strutbox%
  \advance\dimen@\dimen@ii%
  \advance\dimen@ii-\dimen@%
  \kern\p@%
  \vrule\@width1ex\@height\dimen@\@depth\dimen@ii%
  \kern\p@%
}}
\providecommand\qedsymbol{\qedrule}
%    \end{macrocode}
%
% \end{macro}
% \end{macro}
% \end{macro}
%
% \begin{ignore}
% The following is the original definition of the enhanced eqnarray
% environment.  It's not supported, although if you can figure out how to
% extract it, it's all yours.
% \end{ignore}
%
% \begin{old-eqnarray}
%
% \subsection{The sparkly new \env{eqnarray}}
%
% Start off by writing a different package.
%
%    \begin{macrocode}
%</package>
%<*oldeqnarray>
%    \end{macrocode}
%
% \subsubsection{Options handling}
%
% We need to be able to cope with \textsf{fleqn} and \textsf{leqno} options.
% This will adjust our magic modified \env{eqnarray} environment
% appropriately.
%
%    \begin{macrocode}
\newif\if@fleqn
\newif\if@leqno
\DeclareOption{fleqn}{\@fleqntrue}
\DeclareOption{leqno}{\@leqnotrue}
\ProcessOptions
%    \end{macrocode}
%
% This is all really different to the \LaTeX\ version.  I've looked at the
% various \env{tabular} implementations, the original \env{eqnarray} and the
% \textit{\TeX book} to see how best to do this, and then went my own way.
% If it doesn't work it's all my fault.
%
% \subsubsection{Some useful registers}
%
% The old \LaTeX\ version puts the equation numbers in by keeping a count of
% where it is in the alignment.  Since I don't know how may columns there are
% going to be, I'll just use a switch in the preamble to tell me to stop
% tabbing.
%
%    \begin{macrocode}
\newif\if@eqalast
%    \end{macrocode}
%
% Now define some useful length parameters.  First allocate them:
%
%    \begin{macrocode}
\newskip\eqaopenskip
\newskip\eqacloseskip
\newskip\eqacolskip
\newskip\eqainskip
%    \end{macrocode}
%
% Now assign some default values.  Users can play with these if they really
% want although I can't see the point myself.
%
%    \begin{macrocode}
\if@fleqn
  \AtBeginDocument{\eqaopenskip\leftmargini}
\else
  \eqaopenskip\@centering
\fi
\eqacloseskip\@centering
\eqacolskip\@centering
\eqainskip\z@
%    \end{macrocode}
%
% We allow the user to play with the style if this is really wanted.  I dunno
% why, really.  Maybe someone wants very small alignments.
%
%    \begin{macrocode}
\let\eqa@style\displaystyle
%    \end{macrocode}
%
% \subsubsection{The main environments}
%
% We define the toplevel commands here.  They just add in default arguments
% and then call |\@eqnarray| with a preamble string.  The only difference is
% the last column they add in -- \env{eqnarray$*$} throws away the last
% column by sticking it in box~0.  (I used to |\@gobble| it but that caused
% the |\cr| to be lost.)
%
%    \begin{macrocode}
\def\eqnarray{\@ifnextchar[\eqnarray@i{\eqnarray@i[rcl]}}
\def\eqnarray@i[#1]{%
  \@eqnarray{#1!{\hb@xt@\z@{\hss##}\tabskip\z@}}
}
\@namedef{eqnarray*}{\@ifnextchar[\eqnarray@s@i{\eqnarray@s@i[rcl]}}
\def\eqnarray@s@i[#1]{%
  \@eqnarray{#1!{\nonumber\setbox\z@\hbox{##}\tabskip\z@}}%
}
%    \end{macrocode}
%
% \subsubsection{Set up the initial display}
%
% \begin{macro}{\@eqnarray}
%
% The |\@eqnarray| command does most of the initial work.  It sets up some
% flags and things, builds the |\halign| preamble, and returns.
%
%    \begin{macrocode}
\def\@eqnarray#1{%
%    \end{macrocode}
%
% Start playing with the counter here.  The original does some icky internal
% playing, which isn't necessary.  The |\if@eqnsw| switch is |true| if the
% user hasn't supplied an equation number.  The |\if@eqalast| switch is
% |true| in the final equation-number column.
%
%    \begin{macrocode}
  \refstepcounter{equation}%
  \@eqalastfalse%
  \global\@eqnswtrue%
  \m@th%
%    \end{macrocode}
%
% Set things up for the |\halign| which is coming up.
%
%    \begin{macrocode}
  \openup\jot%
  \tabskip\eqaopenskip%
  \let\\\@eqncr%
  \everycr{}%
  $$%
%    \end{macrocode}
%
% We'll build the real |\halign| and preamble in a token register.  All we
% need to do is stuff the header in the token register, clear a switch
% (that'll be explained later), parse the preamble and then expand the
% tokens we collected.  Easy, no?
%
%    \begin{macrocode}
  \toks@{\halign to\displaywidth\bgroup}%
  \@tempswafalse%
  \eqa@preamble#1\end%
  \the\toks@\cr%
}
%    \end{macrocode}
%
% \end{macro}
%
% \subsubsection{Parsing the preamble}
%
% All this actually involves is reading the next character and building a
% command from it.  That can pull off an argument if it needs it.  Just make
% sure we don't fall off the end and we'll be OK.
%
%    \begin{macrocode}
\def\eqa@preamble#1{%
  \ifx\end#1\else\csname eqa@char@#1\expandafter\endcsname\fi%
}
%    \end{macrocode}
%
% Adding stuff to the preamble tokens is a simple matter of using
% |\expandafter| in the correct way.\footnote{^^A
%   I have no idea why \LaTeX\ uses \cmd\edef\ for building its preamble.  It
%   seems utterly insane to me -- the amount of bodgery that \env{tabular}
%   has to go through to make everything expand at the appropriate times is
%   scary.  Maybe Messrs~Lamport and Mittelbach just forgot about token
%   registers when they were writing the code.  Maybe I ought to rewrite the
%   thing properly some time.  Sigh.
%
%   As a sort of postscript to the above, I \emph{have} rewritten the
%   \env{tabular} environment, and made a damned fine job of it, in my
%   oh-so-humble opinion.  All this \env{eqnarray} stuff has been remoulded
%   in terms of the generic column-defining things in \package{mdwtab}.
%   You're reading the documentation of the old version, which isn't
%   supported any more, so any bugs here are your own problem.}
%
%    \begin{macrocode}
\def\eqa@addraw#1{\expandafter\toks@\expandafter{\the\toks@#1}}
%    \end{macrocode}
%
% Now for some cleverness again.  In order to put all the right bits of
% |\tabskip| glue in the right places we must \emph{not} terminate each
% column until we know what the next one is.  We set |\if@tempswa| to be
% |true| if there's a column waiting to be closed (so it's initially
% |false|).  The following macro adds a column correctly, assuming we're in
% a formula.  Other column types make their own arrangements.
%
%    \begin{macrocode}
\def\eqa@add#1{%
  \if@tempswa%
    \eqa@addraw{\tabskip\eqainskip&#1}%
  \else%
    \eqa@addraw{#1}%
  \fi%
  \@tempswatrue%
}
%    \end{macrocode}
%
% Now to defining column types.  Let's define a macro which allows us to
% define column types:
%
%    \begin{macrocode}
\def\eqa@def#1{\expandafter\def\csname eqa@char@#1\endcsname}
%    \end{macrocode}
%
% Now we can define the column types.  Each column type must loop back to
% |\eqa@preamble| once it's finished, to read the rest of the preamble
% string.  Note the positioning of ord atoms in the stuff below.  This will
% space out relations and binops correctly when they occur at the edges of
% columns, and won't affect ord atoms at the edges, because ords pack
% closely.
%
% First the easy onces.  Just stick |\hfil| in the right places and
% everything will be all right.
%
%    \begin{macrocode}
\eqa@def r{\eqa@add{\hfil$\eqa@style##{}$}\eqa@preamble}
\eqa@def c{\eqa@add{\hfil$\eqa@style{}##{}$\hfil}\eqa@preamble}
\eqa@def l{\eqa@add{$\eqa@style{}##$\hfil}\eqa@preamble}
\eqa@def x{\eqa@add{\hfil$\eqa@style##$\hfil}\eqa@preamble}
%    \end{macrocode}
%
% Now for the textual ones.  This is also fairly easy.
%
%    \begin{macrocode}
\eqa@def T#1{%
  \eqa@add{}%
  \if#1l\else\eqa@addraw{\hfil}\fi%
  \eqa@addraw{##}%
  \if#1r\else\eqa@addraw{\hfil}\fi%
  \eqa@preamble%
}
%    \end{macrocode}
%
% Sort of split types of equations.  I mustn't use |\rlap| here, or
% everything goes wrong -- |\\| doesn't get noticed by \TeX\ in the same way
% as |\cr| does.
%
%    \begin{macrocode}
\eqa@def L{\eqa@add{\hb@xt@\z@{$\eqa@style##$\hss}\qquad}\eqa@preamble}
%    \end{macrocode}
%
% The \lit{:} column type is fairly simple.  We set |\tabskip| up to make
% lots of space and close the current column, because there must be one.^^A
% \footnote{This is an assumption.}
%
%    \begin{macrocode}
\eqa@def :{%
  \eqa@addraw{\tabskip\eqacolskip&}\@tempswafalse\eqa@preamble%
}
\eqa@def q{\eqa@add{\quad}\@tempswafalse\eqa@preamble}
%    \end{macrocode}
%
% The other column types just insert given text in an appropriate way.
%
%    \begin{macrocode}
\eqa@def >#1{\eqa@add{#1}\@tempswafalse\eqa@preamble}
\eqa@def <#1{\eqa@addraw{#1}\eqa@preamble}
%    \end{macrocode}
%
% Finally, the magical \lit{!} column type, which sets the equation number.
% We set up the |\tabskip| glue properly, tab on, and set the flag which
% marks the final column.
%
%    \begin{macrocode}
\eqa@def !#1{%
  \eqa@addraw{\tabskip\eqacloseskip&\@eqalasttrue#1}\eqa@preamble%
}
%    \end{macrocode}
%
% \subsubsection{Newline codes}
%
% Newline sequences (|\\|) get turned into calls of |\@eqncr|.  The job is
% fairly simple, really.  However, to avoid reading `|&|' characters
% prematurely, we set up a magic brace (from the \package{array} package --
% this avoids creating ord atoms and other nastyness).
%
%    \begin{macrocode}
\def\@eqncr{%
  \iffalse{\fi\ifnum0=`}\fi%
  \@ifstar{\eqacr@i{\@M}}{\eqacr@i{\interdisplaylinepenalty}}%
}
\def\eqacr@i#1{\@ifnextchar[{\eqacr@ii{#1}}{\eqacr@ii{#1}[\z@]}}
\def\eqacr@ii#1[#2]{%
  \ifnum0=`{}\fi%
  \eqa@eqnum%
  \noalign{\penalty#1\vskip#2\relax}%
}
%    \end{macrocode}
%
% \subsubsection{Setting equation numbers}
%
% Before we start, we need to generalise the flush-left number handling bits.
% The macro |\eqa@eqpos| will put its argument in the right place.
%
%    \begin{macrocode}
\if@leqno
  \def\eqa@eqpos#1{%
    \hb@xt@.01\p@{}\rlap{\normalfont\normalcolor\hskip-\displaywidth#1}%
  }
\else
  \def\eqa@eqpos#1{\normalfont\normalcolor#1}
\fi
%    \end{macrocode}
%
% First we need to move into the right column.  Then we just set the equation
% number appropriately.  There is some subtlety here, ish.  The |\relax| is
% important, to delay expansion of the |\if|\dots\ until the new column has
% been started.  The two helper macros are important too, to hide `|&|'s and
% `|\cr|'s from \TeX's scanner until the right time.
%
%    \begin{macrocode}
\def\eqa@eqnum{%
  \relax%
  \if@eqalast\expandafter\eqa@eqnum@i\else\expandafter\eqa@eqnum@ii\fi%
}
\def\eqa@eqnum@i{%
  \if@eqnsw%
    \eqa@eqpos{(\theequation)}\stepcounter{equation}%
  \else%
    \eqa@eqpos\eqa@number%
  \fi%
  \global\@eqnswtrue%
  \cr%
}
\def\eqa@eqnum@ii{&\eqa@eqnum}
%    \end{macrocode}
%
% \subsubsection{Numbering control}
%
% This is trivial.  We set the |\if@eqnsw| flag to be |false| and store the
% text in a macro.
%
%    \begin{macrocode}
\let\nonumber\relax
\newcommand\nonumber[1][]{\global\@eqnswfalse\global\def\eqa@number{#1}}
%    \end{macrocode}
%
% \subsubsection{Closing the environments off}
%
% This is really easy.  Set the final equation number, close the |\halign|,
% tidy up the equation counter (it's been stepped once too many times) and
% close the display.
%
%    \begin{macrocode}
\def\endeqnarray{%
  \eqa@eqnum%
  \egroup%
  \global\advance\c@equation\m@ne%
  $$%
  \global\@ignoretrue%
}
\expandafter\let\csname endeqnarray*\endcsname\endeqnarray
%    \end{macrocode}
%
% Now start up the other package again.
%
%    \begin{macrocode}
%</oldeqnarray>
%<*package>
%    \end{macrocode}
%
% \end{old-eqnarray}
%
% That's all there is.  Byebye.
%
%    \begin{macrocode}
%</package>
%    \end{macrocode}
%
% \hfill Mark Wooding, \today
%
% \Finale
\endinput