math/mpx-mul4-*.S: Fix up some of the commentary.

[catacomb] / math / mpx-mul4-x86-sse2.S

/// -*- mode: asm; asm-comment-char: ?/; comment-start: "// " -*-
///
/// Large SIMD-based multiplications
///
/// (c) 2016 Straylight/Edgeware

///----- Licensing notice ---------------------------------------------------
///
/// This file is part of Catacomb.
///
/// Catacomb is free software; you can redistribute it and/or modify
/// it under the terms of the GNU Library General Public License as
/// published by the Free Software Foundation; either version 2 of the
/// License, or (at your option) any later version.
///
/// Catacomb is distributed in the hope that it will be useful,
/// but WITHOUT ANY WARRANTY; without even the implied warranty of
/// MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
/// GNU Library General Public License for more details.
///
/// You should have received a copy of the GNU Library General Public
/// License along with Catacomb; if not, write to the Free
/// Software Foundation, Inc., 59 Temple Place - Suite 330, Boston,
/// MA 02111-1307, USA.

///--------------------------------------------------------------------------
/// Preliminaries.

#include "config.h"
#include "asm-common.h"

        .arch   pentium4

        .text

///--------------------------------------------------------------------------
/// Theory.
///
/// We define a number of primitive fixed-size multipliers from which we can
/// construct more general variable-length multipliers.
///
/// The basic trick is the same throughout.  In an operand-scanning
/// multiplication, the inner multiplication loop multiplies a multiple-
/// precision operand by a single precision factor, and adds the result,
/// appropriately shifted, to the result.  A `finely integrated operand
/// scanning' implementation of Montgomery multiplication also adds the
/// product of a single-precision `Montgomery factor' and the modulus,
/// calculated in the same pass.  The more common `coarsely integrated
/// operand scanning' alternates main multiplication and Montgomery passes,
/// which requires additional carry propagation.
///
/// Throughout both plain-multiplication and Montgomery stages, then, one of
/// the factors remains constant throughout the operation, so we can afford
/// to take a little time to preprocess it.  The transformation we perform is
/// as follows.  Let b = 2^16, and B = b^2 = 2^32.  Suppose we're given a
/// 128-bit factor v = v_0 + v_1 B + v_2 B^2 + v_3 B^3.  Split each v_i into
/// two sixteen-bit pieces, so v_i = v'_i + v''_i b.  These eight 16-bit
/// pieces are placed into 32-bit cells, and arranged as two 128-bit SSE
/// operands, as follows.
///
///     Offset     0       4        8      12
///        0    v'_0    v'_1    v''_0   v''_1
///       16    v'_2    v'_3    v''_2   v''_3
///
/// A `pmuludq' instruction ignores the odd positions in its operands; thus,
/// it will act on (say) v'_0 and v''_0 in a single instruction.  Shifting
/// this vector right by 4 bytes brings v'_1 and v''_1 into position.  We can
/// multiply such a vector by a full 32-bit scalar to produce two 48-bit
/// results in 64-bit fields.  The sixteen bits of headroom allows us to add
/// many products together before we must deal with carrying; it also allows
/// for some calculations to be performed on the above expanded form.
///
/// We maintain four `carry' registers XMM4--XMM7 accumulating intermediate
/// results.  The registers' precise roles rotate during the computation; we
/// name them `c0', `c1', `c2', and `c3'.  Each carry register holds two
/// 64-bit halves: the register c0, for example, holds c'_0 (low half) and
/// c''_0 (high half), and represents the value c_0 = c'_0 + c''_0 b; the
/// carry registers collectively represent the value c_0 + c_1 B + c_2 B^2 +
/// c_3 B^3.  The `pmuluqd' instruction acting on a scalar operand (broadcast
/// across all lanes of its vector) and an operand in the expanded form above
/// produces a result which can be added directly to the appropriate carry
/// register.  Following a pass of four multiplications, we perform some
/// limited carry propagation: let t = c''_0 mod B, and let d = c'_0 + t b;
/// then we output z = d mod B, add (floor(d/B), floor(c''_0/B)) to c1, and
/// cycle the carry registers around, so that c1 becomes c0, and the old
/// (implicitly) zeroed c0 becomes c3.
///
/// On 32-bit x86, we are register starved: the expanded operands are kept in
/// memory, typically in warm L1 cache.  The packed operands are read from
/// memory into working registers XMM0--XMM3 and processed immediately.
/// The following conventional argument names and locations are used
/// throughout.
///
/// Arg Format      Location    Notes
///
/// U   packed      [EAX]
/// X   packed      [EBX]       In Montgomery multiplication, X = N
/// V   expanded    [ECX]
/// Y   expanded    [EDX]       In Montgomery multiplication, Y = (A + U V) M
/// M   expanded    [ESI]       -N^{-1} (mod B^4)
/// N                           Modulus, for Montgomery multiplication
/// A   packed      [EDI]       Destination/accumulator
/// C   carry       XMM4--XMM7
///
/// The calculation is some variant of
///
///     A' + C' B^4 <- U V + X Y + A + C
///
/// The low-level functions fit into a fairly traditional (finely-integrated)
/// operand scanning loop over operand pairs (U, X) (indexed by j) and (V, Y)
/// (indexed by i).
///
/// The variants are as follows.
///
/// Function    Variant                 Use             i       j
///
/// mmul4       A = C = 0               Montgomery      0       0
/// dmul4       A = 0                   Montgomery      0       +
/// mmla4       C = 0                   Montgomery      +       0
/// dmla4       exactly as shown        Montgomery      +       +
/// mont4       U = V = C = 0           Montgomery      any     0
///
/// mul4zc      U = V = A = C = 0       Plain           0       0
/// mul4        U = V = A = 0           Plain           0       +
/// mla4zc      U = V = C = 0           Plain           +       0
/// mla4        U = V = 0               Plain           +       +
///
/// The `mmul4' and `mmla4' functions are also responsible for calculating
/// the Montgomery reduction factor Y = (A + U V) M used by the rest of the
/// inner loop.

///--------------------------------------------------------------------------
/// Macro definitions.

.macro  mulcore r, s, d0, d1=nil, d2=nil, d3=nil
        // Load a word r_i from R, multiply by the expanded operand [S], and
        // leave the pieces of the product in registers D0, D1, D2, D3.
        movd    \d0, \r                 // (r_i, 0; 0, 0)
  .ifnes "\d1", "nil"
        movdqa  \d1, [\s]               // (s'_0, s'_1; s''_0, s''_1)
  .endif
  .ifnes "\d3", "nil"
        movdqa  \d3, [\s + 16]          // (s'_2, s'_3; s''_2, s''_3)
  .endif
        pshufd  \d0, \d0, SHUF(0, 3, 0, 3) // (r_i, ?; r_i, ?)
  .ifnes "\d1", "nil"
        psrldq  \d1, 4                  // (s'_1, s''_0; s''_1, 0)
  .endif
  .ifnes "\d2", "nil"
    .ifnes "\d3", "nil"
        movdqa  \d2, \d3                // another copy of (s'_2, s'_3; ...)
    .else
        movdqa  \d2, \d0                // another copy of (r_i, ?; r_i, ?)
    .endif
  .endif
  .ifnes "\d3", "nil"
        psrldq  \d3, 4                  // (s'_3, s''_2; s''_3, 0)
  .endif
  .ifnes "\d1", "nil"
        pmuludq \d1, \d0                // (r_i s'_1; r_i s''_1)
  .endif
  .ifnes "\d3", "nil"
        pmuludq \d3, \d0                // (r_i s'_3; r_i s''_3)
  .endif
  .ifnes "\d2", "nil"
    .ifnes "\d3", "nil"
        pmuludq \d2, \d0                // (r_i s'_2; r_i s''_2)
    .else
        pmuludq \d2, [\s + 16]
    .endif
  .endif
        pmuludq \d0, [\s]               // (r_i s'_0; r_i s''_0)
.endm

.macro  accum   c0, c1=nil, c2=nil, c3=nil
        // Accumulate 64-bit pieces in XMM0--XMM3 into the corresponding
        // carry registers C0--C3.  Any or all of C1--C3 may be `nil' to skip
        // updating that register.
        paddq   \c0, xmm0
  .ifnes "\c1", "nil"
        paddq   \c1, xmm1
  .endif
  .ifnes "\c2", "nil"
        paddq   \c2, xmm2
  .endif
  .ifnes "\c3", "nil"
        paddq   \c3, xmm3
  .endif
.endm

.macro  mulacc  r, s, c0, c1, c2, c3, z3p=nil
        // Load a word r_i from R, multiply by the expanded operand [S],
        // and accumulate in carry registers C0, C1, C2, C3.  If Z3P is `t'
        // then C3 notionally contains zero, but needs clearing; in practice,
        // we store the product directly rather than attempting to add.  On
        // completion, XMM0, XMM1, and XMM2 are clobbered, as is XMM3 if Z3P
        // is not `t'.
  .ifeqs "\z3p", "t"
        mulcore \r, \s, xmm0, xmm1, xmm2, \c3
        accum           \c0,  \c1,  \c2
  .else
        mulcore \r, \s, xmm0, xmm1, xmm2, xmm3
        accum           \c0,  \c1,  \c2,  \c3
  .endif
.endm

.macro  propout d, c, cc=nil
        // Calculate an output word from C, and store it in D; propagate
        // carries out from C to CC in preparation for a rotation of the
        // carry registers.  On completion, XMM3 is clobbered.  If CC is
        // `nil', then the contribution which would have been added to it is
        // left in C.
        pshufd  xmm3, \c, SHUF(3, 3, 3, 2) // (?, ?; ?, t = c'' mod B)
        psrldq  xmm3, 12                // (t, 0; 0, 0) = (t, 0)
        pslldq  xmm3, 2                 // (t b; 0)
        paddq   \c, xmm3                // (c' + t b; c'')
        movd    \d, \c
        psrlq   \c, 32                  // floor(c/B)
  .ifnes "\cc", "nil"
        paddq   \cc, \c                 // propagate up
  .endif
.endm

.macro  endprop d, c, t
        // On entry, C contains a carry register.  On exit, the low 32 bits
        // of the value represented in C are written to D, and the remaining
        // bits are left at the bottom of T.
        movdqa  \t, \c
        psllq   \t, 16                  // (?; c'' b)
        pslldq  \c, 8                   // (0; c')
        paddq   \t, \c                  // (?; c' + c'' b)
        psrldq  \t, 8                   // (c' + c'' b; 0) = (c; 0)
        movd    \d, \t
        psrldq  \t, 4                   // (floor(c/B); 0)
.endm

.macro  expand  z, a, b, c=nil, d=nil
        // On entry, A and C hold packed 128-bit values, and Z is zero.  On
        // exit, A:B and C:D together hold the same values in expanded
        // form.  If C is `nil', then only expand A to A:B.
        movdqa  \b, \a                  // (a_0, a_1; a_2, a_3)
  .ifnes "\c", "nil"
        movdqa  \d, \c                  // (c_0, c_1; c_2, c_3)
  .endif
        punpcklwd \a, \z                // (a'_0, a''_0; a'_1, a''_1)
        punpckhwd \b, \z                // (a'_2, a''_2; a'_3, a''_3)
  .ifnes "\c", "nil"
        punpcklwd \c, \z                // (c'_0, c''_0; c'_1, c''_1)
        punpckhwd \d, \z                // (c'_2, c''_2; c'_3, c''_3)
  .endif
        pshufd  \a, \a, SHUF(0, 2, 1, 3) // (a'_0, a'_1; a''_0, a''_1)
        pshufd  \b, \b, SHUF(0, 2, 1, 3) // (a'_2, a'_3; a''_2, a''_3)
  .ifnes "\c", "nil"
        pshufd  \c, \c, SHUF(0, 2, 1, 3) // (c'_0, c'_1; c''_0, c''_1)
        pshufd  \d, \d, SHUF(0, 2, 1, 3) // (c'_2, c'_3; c''_2, c''_3)
  .endif
.endm

.macro  squash  c0, c1, c2, c3, t, u, lo, hi=nil
        // On entry, C0, C1, C2, C3 are carry registers representing a value
        // Y.  On exit, LO holds the low 128 bits of the carry value; C1, C2,
        // C3, T, and U are clobbered; and the high bits of Y are stored in
        // HI, if this is not `nil'.

        // The first step is to eliminate the `double-prime' pieces -- i.e.,
        // the ones offset by 16 bytes from a 32-bit boundary -- by carrying
        // them into the 32-bit-aligned pieces above and below.  But before
        // we can do that, we must gather them together.
        movdqa  \t, \c0
        movdqa  \u, \c1
        punpcklqdq \t, \c2              // (y'_0; y'_2)
        punpckhqdq \c0, \c2             // (y''_0; y''_2)
        punpcklqdq \u, \c3              // (y'_1; y'_3)
        punpckhqdq \c1, \c3             // (y''_1; y''_3)

        // Now split the double-prime pieces.  The high (up to) 48 bits will
        // go up; the low 16 bits go down.
        movdqa  \c2, \c0
        movdqa  \c3, \c1
        psllq   \c2, 48
        psllq   \c3, 48
        psrlq   \c0, 16                 // high parts of (y''_0; y''_2)
        psrlq   \c1, 16                 // high parts of (y''_1; y''_3)
        psrlq   \c2, 32                 // low parts of (y''_0; y''_2)
        psrlq   \c3, 32                 // low parts of (y''_1; y''_3)
  .ifnes "\hi", "nil"
        movdqa  \hi, \c1
  .endif
        pslldq  \c1, 8                  // high part of (0; y''_1)

        paddq   \t, \c2                 // propagate down
        paddq   \u, \c3
        paddq   \t, \c1                 // and up: (y_0; y_2)
        paddq   \u, \c0                 // (y_1; y_3)
  .ifnes "\hi", "nil"
        psrldq  \hi, 8                  // high part of (y''_3; 0)
  .endif

        // Finally extract the answer.  This complicated dance is better than
        // storing to memory and loading, because the piecemeal stores
        // inhibit store forwarding.
        movdqa  \c3, \t                 // (y_0; ?)
        movdqa  \lo, \t                 // (y^*_0, ?; ?, ?)
        psrldq  \t, 8                   // (y_2; 0)
        psrlq   \c3, 32                 // (floor(y_0/B); ?)
        paddq   \c3, \u                 // (y_1 + floor(y_0/B); ?)
        movdqa  \c1, \c3                // (y^*_1, ?; ?, ?)
        psrldq  \u, 8                   // (y_3; 0)
        psrlq   \c3, 32                 // (floor((y_1 B + y_0)/B^2; ?)
        paddq   \c3, \t                 // (y_2 + floor((y_1 B + y_0)/B^2; ?)
        punpckldq \lo, \c3              // (y^*_0, y^*_2; ?, ?)
        psrlq   \c3, 32             // (floor((y_2 B^2 + y_1 B + y_0)/B^3; ?)
        paddq   \c3, \u       // (y_3 + floor((y_2 B^2 + y_1 B + y_0)/B^3; ?)
  .ifnes "\hi", "nil"
        movdqa  \t, \c3
        pxor    \u, \u
  .endif
        punpckldq \c1, \c3              // (y^*_1, y^*_3; ?, ?)
  .ifnes "\hi", "nil"
        psrlq   \t, 32                  // very high bits of y
        paddq   \hi, \t
        punpcklqdq \hi, \u              // carry up
  .endif
        punpckldq \lo, \c1              // y mod B^4
.endm

.macro  carryadd
        // On entry, EDI points to a packed addend A, and XMM4, XMM5, XMM6
        // hold the incoming carry registers c0, c1, and c2 representing a
        // carry-in C.
        //
        // On exit, the carry registers, including XMM7, are updated to hold
        // C + A; XMM0, XMM1, XMM2, and XMM3 are clobbered.  The other
        // registers are preserved.
        movd    xmm0, [edi +  0]        // (a_0; 0)
        movd    xmm1, [edi +  4]        // (a_1; 0)
        movd    xmm2, [edi +  8]        // (a_2; 0)
        movd    xmm7, [edi + 12]        // (a_3; 0)

        paddq   xmm4, xmm0              // (c'_0 + a_0; c''_0)
        paddq   xmm5, xmm1              // (c'_1 + a_1; c''_1)
        paddq   xmm6, xmm2              // (c'_2 + a_2; c''_2 + a_3 b)
.endm

///--------------------------------------------------------------------------
/// Primitive multipliers and related utilities.

INTFUNC(carryprop)
        // On entry, XMM4, XMM5, and XMM6 hold a 144-bit carry in an expanded
        // form.  Store the low 128 bits of the represented carry to [EDI] as
        // a packed 128-bit value, and leave the remaining 16 bits in the low
        // 32 bits of XMM4.  On exit, XMM3, XMM5 and XMM6 are clobbered.
  endprologue

        propout [edi +  0], xmm4, xmm5
        propout [edi +  4], xmm5, xmm6
        propout [edi +  8], xmm6, nil
        endprop [edi + 12], xmm6, xmm4
        ret
ENDFUNC

INTFUNC(dmul4)
        // On entry, EDI points to the destination buffer; EAX and EBX point
        // to the packed operands U and X; ECX and EDX point to the expanded
        // operands V and Y; and XMM4, XMM5, XMM6 hold the incoming carry
        // registers c0, c1, and c2; c3 is assumed to be zero.
        //
        // On exit, we write the low 128 bits of the sum C + U V + X Y to
        // [EDI], and update the carry registers with the carry out.  The
        // registers XMM0, XMM1, XMM2, XMM3, and XMM7 are clobbered; the
        // general-purpose registers are preserved.
  endprologue

        mulacc  [eax +  0], ecx, xmm4, xmm5, xmm6, xmm7, t
        mulacc  [ebx +  0], edx, xmm4, xmm5, xmm6, xmm7
        propout [edi +  0],      xmm4, xmm5

        mulacc  [eax +  4], ecx, xmm5, xmm6, xmm7, xmm4, t
        mulacc  [ebx +  4], edx, xmm5, xmm6, xmm7, xmm4
        propout [edi +  4],      xmm5, xmm6

        mulacc  [eax +  8], ecx, xmm6, xmm7, xmm4, xmm5, t
        mulacc  [ebx +  8], edx, xmm6, xmm7, xmm4, xmm5
        propout [edi +  8],      xmm6, xmm7

        mulacc  [eax + 12], ecx, xmm7, xmm4, xmm5, xmm6, t
        mulacc  [ebx + 12], edx, xmm7, xmm4, xmm5, xmm6
        propout [edi + 12],      xmm7, xmm4

        ret
ENDFUNC

INTFUNC(dmla4)
        // On entry, EDI points to the destination buffer, which also
        // contains an addend A to accumulate; EAX and EBX point to the
        // packed operands U and X; ECX and EDX point to the expanded
        // operands V and Y; and XMM4, XMM5, XMM6 hold the incoming carry
        // registers c0, c1, and c2 representing a carry-in C; c3 is assumed
        // to be zero.
        //
        // On exit, we write the low 128 bits of the sum A + C + U V + X Y to
        // [EDI], and update the carry registers with the carry out.  The
        // registers XMM0, XMM1, XMM2, XMM3, and XMM7 are clobbered; the
        // general-purpose registers are preserved.
  endprologue

        carryadd

        mulacc  [eax +  0], ecx, xmm4, xmm5, xmm6, xmm7
        mulacc  [ebx +  0], edx, xmm4, xmm5, xmm6, xmm7
        propout [edi +  0],      xmm4, xmm5

        mulacc  [eax +  4], ecx, xmm5, xmm6, xmm7, xmm4, t
        mulacc  [ebx +  4], edx, xmm5, xmm6, xmm7, xmm4
        propout [edi +  4],      xmm5, xmm6

        mulacc  [eax +  8], ecx, xmm6, xmm7, xmm4, xmm5, t
        mulacc  [ebx +  8], edx, xmm6, xmm7, xmm4, xmm5
        propout [edi +  8],      xmm6, xmm7

        mulacc  [eax + 12], ecx, xmm7, xmm4, xmm5, xmm6, t
        mulacc  [ebx + 12], edx, xmm7, xmm4, xmm5, xmm6
        propout [edi + 12],      xmm7, xmm4

        ret
ENDFUNC

INTFUNC(mul4zc)
        // On entry, EDI points to the destination buffer; EBX points to a
        // packed operand X; and EDX points to an expanded operand Y.
        //
        // On exit, we write the low 128 bits of the product X Y to [EDI],
        // and set the carry registers XMM4, XMM5, XMM6 to the carry out.
        // The registers XMM0, XMM1, XMM2, XMM3, and XMM7 are clobbered; the
        // general-purpose registers are preserved.
  endprologue

        mulcore [ebx +  0], edx, xmm4, xmm5, xmm6, xmm7
        propout [edi +  0],      xmm4, xmm5

        mulacc  [ebx +  4], edx, xmm5, xmm6, xmm7, xmm4, t
        propout [edi +  4],      xmm5, xmm6

        mulacc  [ebx +  8], edx, xmm6, xmm7, xmm4, xmm5, t
        propout [edi +  8],      xmm6, xmm7

        mulacc  [ebx + 12], edx, xmm7, xmm4, xmm5, xmm6, t
        propout [edi + 12],      xmm7, xmm4

        ret
ENDFUNC

INTFUNC(mul4)
        // On entry, EDI points to the destination buffer; EBX points to a
        // packed operand X; EDX points to an expanded operand Y; and XMM4,
        // XMM5, XMM6 hold the incoming carry registers c0, c1, and c2,
        // representing a carry-in C; c3 is assumed to be zero.
        //
        // On exit, we write the low 128 bits of the sum C + X Y to [EDI],
        // and update the carry registers with the carry out.  The registers
        // XMM0, XMM1, XMM2, XMM3, and XMM7 are clobbered; the
        // general-purpose registers are preserved.
  endprologue

        mulacc  [ebx +  0], edx, xmm4, xmm5, xmm6, xmm7, t
        propout [edi +  0],      xmm4, xmm5

        mulacc  [ebx +  4], edx, xmm5, xmm6, xmm7, xmm4, t
        propout [edi +  4],      xmm5, xmm6

        mulacc  [ebx +  8], edx, xmm6, xmm7, xmm4, xmm5, t
        propout [edi +  8],      xmm6, xmm7

        mulacc  [ebx + 12], edx, xmm7, xmm4, xmm5, xmm6, t
        propout [edi + 12],      xmm7, xmm4

        ret
ENDFUNC

INTFUNC(mla4zc)
        // On entry, EDI points to the destination buffer, which also
        // contains an addend A to accumulate; EBX points to a packed operand
        // X; and EDX points to an expanded operand Y.
        //
        // On exit, we write the low 128 bits of the sum A + X Y to [EDI],
        // and set the carry registers XMM4, XMM5, XMM6 to the carry out.
        // The registers XMM0, XMM1, XMM2, XMM3, and XMM7 are clobbered; the
        // general-purpose registers are preserved.
  endprologue

        movd    xmm4, [edi +  0]
        movd    xmm5, [edi +  4]
        movd    xmm6, [edi +  8]
        movd    xmm7, [edi + 12]

        mulacc  [ebx +  0], edx, xmm4, xmm5, xmm6, xmm7
        propout [edi +  0],      xmm4, xmm5

        mulacc  [ebx +  4], edx, xmm5, xmm6, xmm7, xmm4, t
        propout [edi +  4],      xmm5, xmm6

        mulacc  [ebx +  8], edx, xmm6, xmm7, xmm4, xmm5, t
        propout [edi +  8],      xmm6, xmm7

        mulacc  [ebx + 12], edx, xmm7, xmm4, xmm5, xmm6, t
        propout [edi + 12],      xmm7, xmm4

        ret
ENDFUNC

INTFUNC(mla4)
        // On entry, EDI points to the destination buffer, which also
        // contains an addend A to accumulate; EBX points to a packed operand
        // X; EDX points to an expanded operand Y; and XMM4, XMM5, XMM6 hold
        // the incoming carry registers c0, c1, and c2, representing a
        // carry-in C; c3 is assumed to be zero.
        //
        // On exit, we write the low 128 bits of the sum A + C + X Y to
        // [EDI], and update the carry registers with the carry out.  The
        // registers XMM0, XMM1, XMM2, XMM3, and XMM7 are clobbered; the
        // general-purpose registers are preserved.
  endprologue

        carryadd

        mulacc  [ebx +  0], edx, xmm4, xmm5, xmm6, xmm7
        propout [edi +  0],      xmm4, xmm5

        mulacc  [ebx +  4], edx, xmm5, xmm6, xmm7, xmm4, t
        propout [edi +  4],      xmm5, xmm6

        mulacc  [ebx +  8], edx, xmm6, xmm7, xmm4, xmm5, t
        propout [edi +  8],      xmm6, xmm7

        mulacc  [ebx + 12], edx, xmm7, xmm4, xmm5, xmm6, t
        propout [edi + 12],      xmm7, xmm4

        ret
ENDFUNC

INTFUNC(mmul4)
        // On entry, EDI points to the destination buffer; EAX and EBX point
        // to the packed operands U and N; ECX and ESI point to the expanded
        // operands V and M; and EDX points to a place to store an expanded
        // result Y (32 bytes, at a 16-byte boundary).  The stack pointer
        // must be 12 modulo 16, as is usual for modern x86 ABIs.
        //
        // On exit, we write Y = U V M mod B to [EDX], and the low 128 bits
        // of the sum U V + N Y to [EDI], leaving the remaining carry in
        // XMM4, XMM5, and XMM6.  The registers XMM0, XMM1, XMM2, XMM3, and
        // XMM7 are clobbered; the general-purpose registers are preserved.
        stalloc 48 + 12                 // space for the carries
  endprologue

        // Calculate W = U V, and leave it in the destination.  Stash the
        // carry pieces for later.
        mulcore [eax +  0], ecx, xmm4, xmm5, xmm6, xmm7
        propout [edi +  0],      xmm4, xmm5
        jmp     5f
ENDFUNC

INTFUNC(mmla4)
        // On entry, EDI points to the destination buffer, which also
        // contains an addend A to accumulate; EAX and EBX point to the
        // packed operands U and N; ECX and ESI point to the expanded
        // operands V and M; and EDX points to a place to store an expanded
        // result Y (32 bytes, at a 16-byte boundary).  The stack pointer
        // must be 12 modulo 16, as is usual for modern x86 ABIs.
        //
        // On exit, we write Y = (A + U V) M mod B to [EDX], and the low 128
        // bits of the sum A + U V + N Y to [EDI], leaving the remaining
        // carry in XMM4, XMM5, and XMM6.  The registers XMM0, XMM1, XMM2,
        // XMM3, and XMM7 are clobbered; the general-purpose registers are
        // preserved.
        stalloc 48 + 12                 // space for the carries
  endprologue

        movd    xmm4, [edi +  0]
        movd    xmm5, [edi +  4]
        movd    xmm6, [edi +  8]
        movd    xmm7, [edi + 12]

        // Calculate W = U V, and leave it in the destination.  Stash the
        // carry pieces for later.
        mulacc  [eax +  0], ecx, xmm4, xmm5, xmm6, xmm7
        propout [edi +  0],      xmm4, xmm5

5:      mulacc  [eax +  4], ecx, xmm5, xmm6, xmm7, xmm4, t
        propout [edi +  4],      xmm5, xmm6

        mulacc  [eax +  8], ecx, xmm6, xmm7, xmm4, xmm5, t
        propout [edi +  8],      xmm6, xmm7

        mulacc  [eax + 12], ecx, xmm7, xmm4, xmm5, xmm6, t
        propout [edi + 12],      xmm7, xmm4

        movdqa  [SP +  0], xmm4
        movdqa  [SP + 16], xmm5
        movdqa  [SP + 32], xmm6

        // Calculate Y = W M.
        mulcore [edi +  0], esi, xmm4, xmm5, xmm6, xmm7

        mulcore [edi +  4], esi, xmm0, xmm1, xmm2
        accum                    xmm5, xmm6, xmm7

        mulcore [edi +  8], esi, xmm0, xmm1
        accum                    xmm6, xmm7

        mulcore [edi + 12], esi, xmm0
        accum                    xmm7

        // That's lots of pieces.  Now we have to assemble the answer.
        squash  xmm4, xmm5, xmm6, xmm7,  xmm0, xmm1,  xmm4

        // Expand it.
        pxor    xmm2, xmm2
        expand  xmm2, xmm4, xmm1
        movdqa  [edx +  0], xmm4
        movdqa  [edx + 16], xmm1

        // Initialize the carry from the value for W we calculated earlier.
        movd    xmm4, [edi +  0]
        movd    xmm5, [edi +  4]
        movd    xmm6, [edi +  8]
        movd    xmm7, [edi + 12]

        // Finish the calculation by adding the Montgomery product.
        mulacc  [ebx +  0], edx, xmm4, xmm5, xmm6, xmm7
        propout [edi +  0],      xmm4, xmm5

        mulacc  [ebx +  4], edx, xmm5, xmm6, xmm7, xmm4, t
        propout [edi +  4],      xmm5, xmm6

        mulacc  [ebx +  8], edx, xmm6, xmm7, xmm4, xmm5, t
        propout [edi +  8],      xmm6, xmm7

        mulacc  [ebx + 12], edx, xmm7, xmm4, xmm5, xmm6, t
        propout [edi + 12],      xmm7, xmm4

        // Add add on the carry we calculated earlier.
        paddq   xmm4, [SP +  0]
        paddq   xmm5, [SP + 16]
        paddq   xmm6, [SP + 32]

        // And, with that, we're done.
        stfree  48 + 12
        ret
ENDFUNC

INTFUNC(mont4)
        // On entry, EDI points to the destination buffer holding a packed
        // value W; EBX points to a packed operand N; ESI points to an
        // expanded operand M; and EDX points to a place to store an expanded
        // result Y (32 bytes, at a 16-byte boundary).
        //
        // On exit, we write Y = W M mod B to [EDX], and the low 128 bits
        // of the sum W + N Y to [EDI], leaving the remaining carry in
        // XMM4, XMM5, and XMM6.  The registers XMM0, XMM1, XMM2, XMM3, and
        // XMM7 are clobbered; the general-purpose registers are preserved.
  endprologue

        // Calculate Y = W M.
        mulcore [edi +  0], esi, xmm4, xmm5, xmm6, xmm7

        mulcore [edi +  4], esi, xmm0, xmm1, xmm2
        accum                    xmm5, xmm6, xmm7

        mulcore [edi +  8], esi, xmm0, xmm1
        accum                    xmm6, xmm7

        mulcore [edi + 12], esi, xmm0
        accum                    xmm7

        // That's lots of pieces.  Now we have to assemble the answer.
        squash  xmm4, xmm5, xmm6, xmm7,  xmm0, xmm1,  xmm4

        // Expand it.
        pxor    xmm2, xmm2
        expand  xmm2, xmm4, xmm1
        movdqa  [edx +  0], xmm4
        movdqa  [edx + 16], xmm1

        // Initialize the carry from W.
        movd    xmm4, [edi +  0]
        movd    xmm5, [edi +  4]
        movd    xmm6, [edi +  8]
        movd    xmm7, [edi + 12]

        // Finish the calculation by adding the Montgomery product.
        mulacc  [ebx +  0], edx, xmm4, xmm5, xmm6, xmm7
        propout [edi +  0],      xmm4, xmm5

        mulacc  [ebx +  4], edx, xmm5, xmm6, xmm7, xmm4, t
        propout [edi +  4],      xmm5, xmm6

        mulacc  [ebx +  8], edx, xmm6, xmm7, xmm4, xmm5, t
        propout [edi +  8],      xmm6, xmm7

        mulacc  [ebx + 12], edx, xmm7, xmm4, xmm5, xmm6, t
        propout [edi + 12],      xmm7, xmm4

        // And, with that, we're done.
        ret
ENDFUNC

///--------------------------------------------------------------------------
/// Bulk multipliers.

FUNC(mpx_umul4_x86_avx)
        .arch   .avx
        vzeroupper
  endprologue
        // and drop through...
        .arch   pentium4
ENDFUNC

FUNC(mpx_umul4_x86_sse2)
        // void mpx_umul4_x86_sse2(mpw *dv, const mpw *av, const mpw *avl,
        //                         const mpw *bv, const mpw *bvl);

        // Build a stack frame.  Arguments will be relative to BP, as
        // follows.
        //
        //      BP + 20 dv
        //      BP + 24 av
        //      BP + 28 avl
        //      BP + 32 bv
        //      BP + 36 bvl
        //
        // Locals are relative to SP, as follows.
        //
        //      SP +  0 expanded Y (32 bytes)
        //      SP + 32 (top of locals)
        pushreg BP
        pushreg ebx
        pushreg esi
        pushreg edi
        setfp
        stalloc 32
        and     SP, ~15
  endprologue

        // Prepare for the first iteration.
        mov     esi, [BP + 32]          // -> bv[0]
        pxor    xmm7, xmm7
        movdqu  xmm0, [esi]             // bv[0]
        mov     edi, [BP + 20]          // -> dv[0]
        mov     ecx, edi                // outer loop dv cursor
        expand  xmm7, xmm0, xmm1
        mov     ebx, [BP + 24]          // -> av[0]
        mov     eax, [BP + 28]          // -> av[m] = av limit
        mov     edx, SP                 // -> expanded Y = bv[0]
        movdqa  [SP + 0], xmm0          // bv[0] expanded low
        movdqa  [SP + 16], xmm1         // bv[0] expanded high
        call    mul4zc
        add     ebx, 16
        add     edi, 16
        add     ecx, 16
        add     esi, 16
        cmp     ebx, eax                // all done?
        jae     8f

        .p2align 4
        // Continue with the first iteration.
0:      call    mul4
        add     ebx, 16
        add     edi, 16
        cmp     ebx, eax                // all done?
        jb      0b

        // Write out the leftover carry.  There can be no tail here.
8:      call    carryprop
        cmp     esi, [BP + 36]          // more passes to do?
        jae     9f

        .p2align 4
        // Set up for the next pass.
1:      movdqu  xmm0, [esi]             // bv[i]
        mov     edi, ecx                // -> dv[i]
        pxor    xmm7, xmm7
        expand  xmm7, xmm0, xmm1
        mov     ebx, [BP + 24]          // -> av[0]
        movdqa  [SP + 0], xmm0          // bv[i] expanded low
        movdqa  [SP + 16], xmm1         // bv[i] expanded high
        call    mla4zc
        add     edi, 16
        add     ebx, 16
        add     ecx, 16
        add     esi, 16
        cmp     ebx, eax                // done yet?
        jae     8f

        .p2align 4
        // Continue...
0:      call    mla4
        add     ebx, 16
        add     edi, 16
        cmp     ebx, eax
        jb      0b

        // Finish off this pass.  There was no tail on the previous pass, and
        // there can be none on this pass.
8:      call    carryprop
        cmp     esi, [BP + 36]
        jb      1b

        // All over.
9:      dropfp
        pop     edi
        pop     esi
        pop     ebx
        pop     BP
        ret
ENDFUNC

FUNC(mpxmont_mul4_x86_avx)
        .arch   .avx
        vzeroupper
  endprologue
        // and drop through...
        .arch   pentium4
ENDFUNC

FUNC(mpxmont_mul4_x86_sse2)
        // void mpxmont_mul4_x86_sse2(mpw *dv, const mpw *av, const mpw *bv,
        //                           const mpw *nv, size_t n, const mpw *mi);

        // Build a stack frame.  Arguments will be relative to BP, as
        // follows.
        //
        //      BP + 20 dv
        //      BP + 24 av
        //      BP + 28 bv
        //      BP + 32 nv
        //      BP + 36 n (nonzero multiple of 4)
        //      BP + 40 mi
        //
        // Locals are relative to SP, which 16-byte aligned, as follows.
        //
        //      SP +   0        expanded V (32 bytes)
        //      SP +  32        expanded M (32 bytes)
        //      SP +  64        expanded Y (32 bytes)
        //      SP +  96        outer loop dv
        //      SP + 100        outer loop bv
        //      SP + 104        av limit (mostly in ESI)
        //      SP + 108        bv limit
        //      SP + 112        (top of locals)
        pushreg BP
        pushreg ebx
        pushreg esi
        pushreg edi
        setfp
        stalloc 112
        and     SP, ~15
  endprologue

        // Establish the expanded operands.
        pxor    xmm7, xmm7
        mov     ecx, [BP + 28]          // -> bv
        mov     edx, [BP + 40]          // -> mi
        movdqu  xmm0, [ecx]             // bv[0]
        movdqu  xmm2, [edx]             // mi
        expand  xmm7, xmm0, xmm1, xmm2, xmm3
        movdqa  [SP +  0], xmm0         // bv[0] expanded low
        movdqa  [SP + 16], xmm1         // bv[0] expanded high
        movdqa  [SP + 32], xmm2         // mi expanded low
        movdqa  [SP + 48], xmm3         // mi expanded high

        // Set up the outer loop state and prepare for the first iteration.
        mov     edx, [BP + 36]          // n
        mov     eax, [BP + 24]          // -> U = av[0]
        mov     ebx, [BP + 32]          // -> X = nv[0]
        mov     edi, [BP + 20]          // -> Z = dv[0]
        mov     [SP + 100], ecx
        lea     ecx, [ecx + 4*edx]      // -> bv[n/4] = bv limit
        lea     edx, [eax + 4*edx]      // -> av[n/4] = av limit
        mov     [SP + 96], edi
        mov     [SP + 104], edx
        mov     [SP + 108], ecx
        lea     ecx, [SP + 0]           // -> expanded V = bv[0]
        lea     esi, [SP + 32]          // -> expanded M = mi
        lea     edx, [SP + 64]          // -> space for Y
        call    mmul4
        mov     esi, [SP + 104]         // recover av limit
        add     edi, 16
        add     eax, 16
        add     ebx, 16
        cmp     eax, esi                // done already?
        jae     8f
        mov     [SP + 96], edi

        .p2align 4
        // Complete the first inner loop.
0:      call    dmul4
        add     edi, 16
        add     eax, 16
        add     ebx, 16
        cmp     eax, esi                // done yet?
        jb      0b

        // Still have carries left to propagate.
        call    carryprop
        movd    [edi + 16], xmm4

        .p2align 4
        // Embark on the next iteration.  (There must be one.  If n = 1, then
        // we would have bailed above, to label 8.  Similarly, the subsequent
        // iterations can fall into the inner loop immediately.)
1:      mov     eax, [SP + 100]         // -> bv[i - 1]
        mov     edi, [SP + 96]          // -> Z = dv[i]
        add     eax, 16                 // -> bv[i]
        pxor    xmm7, xmm7
        mov     [SP + 100], eax
        cmp     eax, [SP + 108]         // done yet?
        jae     9f
        movdqu  xmm0, [eax]             // bv[i]
        mov     ebx, [BP + 32]          // -> X = nv[0]
        lea     esi, [SP + 32]          // -> expanded M = mi
        mov     eax, [BP + 24]          // -> U = av[0]
        expand  xmm7, xmm0, xmm1
        movdqa  [SP + 0], xmm0          // bv[i] expanded low
        movdqa  [SP + 16], xmm1         // bv[i] expanded high
        call    mmla4
        mov     esi, [SP + 104]         // recover av limit
        add     edi, 16
        add     eax, 16
        add     ebx, 16
        mov     [SP + 96], edi

        .p2align 4
        // Complete the next inner loop.
0:      call    dmla4
        add     edi, 16
        add     eax, 16
        add     ebx, 16
        cmp     eax, esi
        jb      0b

        // Still have carries left to propagate, and they overlap the
        // previous iteration's final tail, so read that in and add it.
        movd    xmm0, [edi]
        paddq   xmm4, xmm0
        call    carryprop
        movd    [edi + 16], xmm4

        // Back again.
        jmp     1b

        // First iteration was short.  Write out the carries and we're done.
        // (This could be folded into the main loop structure, but that would
        // penalize small numbers more.)
8:      call    carryprop
        movd    [edi + 16], xmm4

        // All done.
9:      dropfp
        popreg  edi
        popreg  esi
        popreg  ebx
        popreg  BP
        ret
ENDFUNC

FUNC(mpxmont_redc4_x86_avx)
        .arch   .avx
        vzeroupper
  endprologue
        // and drop through...
        .arch   pentium4
ENDFUNC

FUNC(mpxmont_redc4_x86_sse2)
        // void mpxmont_redc4_x86_sse2(mpw *dv, mpw *dvl, const mpw *nv,
        //                             size_t n, const mpw *mi);

        // Build a stack frame.  Arguments will be relative to BP, as
        // follows.
        //
        //      BP + 20 dv
        //      BP + 24 dvl
        //      BP + 28 nv
        //      BP + 32 n (nonzero multiple of 4)
        //      BP + 36 mi
        //
        // Locals are relative to SP, as follows.
        //
        //      SP +  0 outer loop dv
        //      SP +  4 outer dv limit
        //      SP +  8 blocks-of-4 dv limit
        //      SP + 12 expanded M (32 bytes)
        //      SP + 44 expanded Y (32 bytes)
        //      SP + 76 (top of locals)
        pushreg BP
        pushreg ebx
        pushreg esi
        pushreg edi
        setfp
        and     SP, ~15
        stalloc 76
  endprologue

        // Establish the expanded operands and the blocks-of-4 dv limit.
        mov     edi, [BP + 20]          // -> Z = dv[0]
        pxor    xmm7, xmm7
        mov     eax, [BP + 24]          // -> dv[n] = dv limit
        sub     eax, edi                // length of dv in bytes
        mov     edx, [BP + 36]          // -> mi
        movdqu  xmm0, [edx]             // mi
        and     eax, ~15                // mask off the tail end
        expand  xmm7, xmm0, xmm1
        add     eax, edi                // find limit
        movdqa  [SP + 12], xmm0         // mi expanded low
        movdqa  [SP + 28], xmm1         // mi expanded high
        mov     [SP + 8], eax

        // Set up the outer loop state and prepare for the first iteration.
        mov     ecx, [BP + 32]          // n
        mov     ebx, [BP + 28]          // -> X = nv[0]
        lea     edx, [edi + 4*ecx]      // -> dv[n/4] = outer dv limit
        lea     ecx, [ebx + 4*ecx]      // -> nv[n/4] = nv limit
        mov     [SP + 0], edi
        mov     [SP + 4], edx
        lea     esi, [SP + 12]          // -> expanded M = mi
        lea     edx, [SP + 44]          // -> space for Y
        call    mont4
        add     ebx, 16
        add     edi, 16
        cmp     ebx, ecx                // done already?
        jae     8f

        .p2align 4
        // Complete the first inner loop.
5:      call    mla4
        add     ebx, 16
        add     edi, 16
        cmp     ebx, ecx                // done yet?
        jb      5b

        // Still have carries left to propagate.
8:      carryadd
        mov     esi, [SP + 8]           // -> dv blocks limit
        mov     edx, [BP + 24]          // dv limit
        psllq   xmm7, 16
        pslldq  xmm7, 8
        paddq   xmm6, xmm7
        call    carryprop
        movd    eax, xmm4
        add     edi, 16
        cmp     edi, esi
        jae     7f

        .p2align 4
        // Continue carry propagation until the end of the buffer.
0:      add     [edi], eax
        mov     eax, 0                  // preserves flags
        adcd    [edi + 4], 0
        adcd    [edi + 8], 0
        adcd    [edi + 12], 0
        adc     eax, 0
        add     edi, 16
        cmp     edi, esi
        jb      0b

        // Deal with the tail end.
7:      add     [edi], eax
        mov     eax, 0                  // preserves flags
        add     edi, 4
        adc     eax, 0
        cmp     edi, edx
        jb      7b

        // All done for this iteration.  Start the next.  (This must have at
        // least one follow-on iteration, or we'd not have started this outer
        // loop.)
8:      mov     edi, [SP + 0]           // -> dv[i - 1]
        mov     ebx, [BP + 28]          // -> X = nv[0]
        lea     edx, [SP + 44]          // -> space for Y
        lea     esi, [SP + 12]          // -> expanded M = mi
        add     edi, 16                 // -> Z = dv[i]
        cmp     edi, [SP + 4]           // all done yet?
        jae     9f
        mov     [SP + 0], edi
        call    mont4
        add     edi, 16
        add     ebx, 16
        jmp     5b

        // All over.
9:      dropfp
        popreg  edi
        popreg  esi
        popreg  ebx
        popreg  BP
        ret
ENDFUNC

///--------------------------------------------------------------------------
/// Testing and performance measurement.

#ifdef TEST_MUL4

.macro  cysetup c
        rdtsc
        mov     [\c], eax
        mov     [\c + 4], edx
.endm

.macro  cystore c, v, n
        rdtsc
        sub     eax, [\c]
        sbb     edx, [\c + 4]
        mov     ebx, [\v]
        mov     ecx, [\n]
        dec     ecx
        mov     [\n], ecx
        mov     [ebx + ecx*8], eax
        mov     [ebx + ecx*8 + 4], edx
.endm

.macro  testprologue n
        pushreg BP
        pushreg ebx
        pushreg esi
        pushreg edi
        setfp
        stalloc 3*32 + 4*4
        and     SP, ~15
  endprologue
        mov     eax, \n
        mov     [SP + 104], eax
        // vars:
        //      SP +   0 = v expanded
        //      SP +  32 = y expanded
        //      SP +  64 = ? expanded
        //      SP +  96 = cycles
        //      SP + 104 = count
.endm

.macro  testepilogue
        dropfp
        popreg  edi
        popreg  esi
        popreg  ebx
        popreg  BP
        ret
.endm

.macro  testldcarry c
        mov     ecx, \c                 // -> c
        movdqu  xmm4, [ecx +  0]        // (c'_0; c''_0)
        movdqu  xmm5, [ecx + 16]        // (c'_1; c''_1)
        movdqu  xmm6, [ecx + 32]        // (c'_2; c''_2)
.endm

.macro  testexpand v=nil, y=nil
        pxor    xmm7, xmm7
  .ifnes "\v", "nil"
        mov     ecx, \v
        movdqu  xmm0, [ecx]
        expand  xmm7, xmm0, xmm1
        movdqa  [SP +  0], xmm0
        movdqa  [SP + 16], xmm1
  .endif
  .ifnes "\y", "nil"
        mov     edx, \y
        movdqu  xmm2, [edx]
        expand  xmm7, xmm2, xmm3
        movdqa  [SP + 32], xmm2
        movdqa  [SP + 48], xmm3
  .endif
.endm

.macro  testtop u=nil, x=nil, mode=nil
        .p2align 4
0:
  .ifnes "\u", "nil"
        lea     ecx, [SP + 0]
  .endif
        mov     ebx, \x
  .ifeqs "\mode", "mont"
        lea     esi, [SP + 32]
  .endif
        cysetup SP + 96
  .ifnes "\u", "nil"
        mov     eax, \u
  .endif
  .ifeqs "\mode", "mont"
        lea     edx, [SP + 64]
  .else
        lea     edx, [SP + 32]
  .endif
.endm

.macro  testtail cyv
        cystore SP + 96, \cyv, SP + 104
        jnz     0b
.endm

.macro  testcarryout c
        mov     ecx, \c
        movdqu  [ecx +  0], xmm4
        movdqu  [ecx + 16], xmm5
        movdqu  [ecx + 32], xmm6
.endm

FUNC(test_dmul4)
        testprologue [BP + 44]
        testldcarry [BP + 24]
        testexpand [BP + 36], [BP + 40]
        mov     edi, [BP + 20]
        testtop [BP + 28], [BP + 32]
        call    dmul4
        testtail [BP + 48]
        testcarryout [BP + 24]
        testepilogue
ENDFUNC

FUNC(test_dmla4)
        testprologue [BP + 44]
        testldcarry [BP + 24]
        testexpand [BP + 36], [BP + 40]
        mov     edi, [BP + 20]
        testtop [BP + 28], [BP + 32]
        call    dmla4
        testtail [BP + 48]
        testcarryout [BP + 24]
        testepilogue
ENDFUNC

FUNC(test_mul4)
        testprologue [BP + 36]
        testldcarry [BP + 24]
        testexpand nil, [BP + 32]
        mov     edi, [BP + 20]
        testtop nil, [BP + 28]
        call    mul4
        testtail [BP + 40]
        testcarryout [BP + 24]
        testepilogue
ENDFUNC

FUNC(test_mul4zc)
        testprologue [BP + 36]
        testldcarry [BP + 24]
        testexpand nil, [BP + 32]
        mov     edi, [BP + 20]
        testtop nil, [BP + 28]
        call    mul4zc
        testtail [BP + 40]
        testcarryout [BP + 24]
        testepilogue
ENDFUNC

FUNC(test_mla4)
        testprologue [BP + 36]
        testldcarry [BP + 24]
        testexpand nil, [BP + 32]
        mov     edi, [BP + 20]
        testtop nil, [BP + 28]
        call    mla4
        testtail [BP + 40]
        testcarryout [BP + 24]
        testepilogue
ENDFUNC

FUNC(test_mla4zc)
        testprologue [BP + 36]
        testldcarry [BP + 24]
        testexpand nil, [BP + 32]
        mov     edi, [BP + 20]
        testtop nil, [BP + 28]
        call    mla4zc
        testtail [BP + 40]
        testcarryout [BP + 24]
        testepilogue
ENDFUNC

FUNC(test_mmul4)
        testprologue [BP + 48]
        testexpand [BP + 40], [BP + 44]
        mov     edi, [BP + 20]
        testtop [BP + 32], [BP + 36], mont
        call    mmul4
        testtail [BP + 52]
        mov     edi, [BP + 28]
        movdqa  xmm0, [SP + 64]
        movdqa  xmm1, [SP + 80]
        movdqu  [edi], xmm0
        movdqu  [edi + 16], xmm1
        testcarryout [BP + 24]
        testepilogue
ENDFUNC

FUNC(test_mmla4)
        testprologue [BP + 48]
        testexpand [BP + 40], [BP + 44]
        mov     edi, [BP + 20]
        testtop [BP + 32], [BP + 36], mont
        call    mmla4
        testtail [BP + 52]
        mov     edi, [BP + 28]
        movdqa  xmm0, [SP + 64]
        movdqa  xmm1, [SP + 80]
        movdqu  [edi], xmm0
        movdqu  [edi + 16], xmm1
        testcarryout [BP + 24]
        testepilogue
ENDFUNC

FUNC(test_mont4)
        testprologue [BP + 40]
        testexpand nil, [BP + 36]
        mov     edi, [BP + 20]
        testtop nil, [BP + 32], mont
        call    mont4
        testtail [BP + 44]
        mov     edi, [BP + 28]
        movdqa  xmm0, [SP + 64]
        movdqa  xmm1, [SP + 80]
        movdqu  [edi], xmm0
        movdqu  [edi + 16], xmm1
        testcarryout [BP + 24]
        testepilogue
ENDFUNC

#endif

///----- That's all, folks --------------------------------------------------