2 * scp.c - Scp (Secure Copy) client for PuTTY.
3 * Joris van Rantwijk, Simon Tatham
5 * This is mainly based on ssh-1.2.26/scp.c by Timo Rinne & Tatu Ylonen.
6 * They, in turn, used stuff from BSD rcp.
8 * (SGT, 2001-09-10: Joris van Rantwijk assures me that although
9 * this file as originally submitted was inspired by, and
10 * _structurally_ based on, ssh-1.2.26's scp.c, there wasn't any
11 * actual code duplicated, so the above comment shouldn't give rise
12 * to licensing issues.)
30 #define PUTTY_DO_GLOBALS
37 #define TIME_POSIX_TO_WIN(t, ft) (*(LONGLONG*)&(ft) = \
38 ((LONGLONG) (t) + (LONGLONG) 11644473600) * (LONGLONG) 10000000)
39 #define TIME_WIN_TO_POSIX(ft, t) ((t) = (unsigned long) \
40 ((*(LONGLONG*)&(ft)) / (LONGLONG) 10000000 - (LONGLONG) 11644473600))
42 /* GUI Adaptation - Sept 2000 */
44 /* This is just a base value from which the main message numbers are
46 #define WM_APP_BASE 0x8000
48 /* These two pass a single character value in wParam. They represent
49 * the visible output from PSCP. */
50 #define WM_STD_OUT_CHAR ( WM_APP_BASE+400 )
51 #define WM_STD_ERR_CHAR ( WM_APP_BASE+401 )
53 /* These pass a transfer status update. WM_STATS_CHAR passes a single
54 * character in wParam, and is called repeatedly to pass the name of
55 * the file, terminated with "\n". WM_STATS_SIZE passes the size of
56 * the file being transferred in wParam. WM_STATS_ELAPSED is called
57 * to pass the elapsed time (in seconds) in wParam, and
58 * WM_STATS_PERCENT passes the percentage of the transfer which is
59 * complete, also in wParam. */
60 #define WM_STATS_CHAR ( WM_APP_BASE+402 )
61 #define WM_STATS_SIZE ( WM_APP_BASE+403 )
62 #define WM_STATS_PERCENT ( WM_APP_BASE+404 )
63 #define WM_STATS_ELAPSED ( WM_APP_BASE+405 )
65 /* These are used at the end of a run to pass an error code in
66 * wParam: zero means success, nonzero means failure. WM_RET_ERR_CNT
67 * is used after a copy, and WM_LS_RET_ERR_CNT is used after a file
69 #define WM_RET_ERR_CNT ( WM_APP_BASE+406 )
70 #define WM_LS_RET_ERR_CNT ( WM_APP_BASE+407 )
72 /* More transfer status update messages. WM_STATS_DONE passes the
73 * number of bytes sent so far in wParam. WM_STATS_ETA passes the
74 * estimated time to completion (in seconds). WM_STATS_RATEBS passes
75 * the average transfer rate (in bytes per second). */
76 #define WM_STATS_DONE ( WM_APP_BASE+408 )
77 #define WM_STATS_ETA ( WM_APP_BASE+409 )
78 #define WM_STATS_RATEBS ( WM_APP_BASE+410 )
81 static int verbose
= 0;
82 static int recursive
= 0;
83 static int preserve
= 0;
84 static int targetshouldbedirectory
= 0;
85 static int statistics
= 1;
86 static int prev_stats_len
= 0;
87 static int scp_unsafe_mode
= 0;
89 /* GUI Adaptation - Sept 2000 */
90 #define NAME_STR_MAX 2048
91 static char statname
[NAME_STR_MAX
+ 1];
92 static unsigned long statsize
= 0;
93 static unsigned long statdone
= 0;
94 static unsigned long stateta
= 0;
95 static unsigned long statratebs
= 0;
96 static int statperct
= 0;
97 static unsigned long statelapsed
= 0;
98 static int gui_mode
= 0;
99 static char *gui_hwnd
= NULL
;
100 static int using_sftp
= 0;
102 static Backend
*back
;
103 static void *backhandle
;
106 static void source(char *src
);
107 static void rsource(char *src
);
108 static void sink(char *targ
, char *src
);
109 /* GUI Adaptation - Sept 2000 */
110 static void tell_char(FILE * stream
, char c
);
111 static void tell_str(FILE * stream
, char *str
);
112 static void tell_user(FILE * stream
, char *fmt
, ...);
113 static void gui_update_stats(char *name
, unsigned long size
,
114 int percentage
, unsigned long elapsed
,
115 unsigned long done
, unsigned long eta
,
116 unsigned long ratebs
);
119 * The maximum amount of queued data we accept before we stop and
120 * wait for the server to process some.
122 #define MAX_SCP_BUFSIZE 16384
124 void ldisc_send(void *handle
, char *buf
, int len
, int interactive
)
127 * This is only here because of the calls to ldisc_send(NULL,
128 * 0) in ssh.c. Nothing in PSCP actually needs to use the ldisc
129 * as an ldisc. So if we get called with any real data, I want
135 /* GUI Adaptation - Sept 2000 */
136 static void send_msg(HWND h
, UINT message
, WPARAM wParam
)
138 while (!PostMessage(h
, message
, wParam
, 0))
142 static void tell_char(FILE * stream
, char c
)
147 unsigned int msg_id
= WM_STD_OUT_CHAR
;
148 if (stream
== stderr
)
149 msg_id
= WM_STD_ERR_CHAR
;
150 send_msg((HWND
) atoi(gui_hwnd
), msg_id
, (WPARAM
) c
);
154 static void tell_str(FILE * stream
, char *str
)
158 for (i
= 0; i
< strlen(str
); ++i
)
159 tell_char(stream
, str
[i
]);
162 static void tell_user(FILE * stream
, char *fmt
, ...)
167 str
= dupvprintf(fmt
, ap
);
169 str2
= dupcat(str
, "\n", NULL
);
171 tell_str(stream
, str2
);
175 static void gui_update_stats(char *name
, unsigned long size
,
176 int percentage
, unsigned long elapsed
,
177 unsigned long done
, unsigned long eta
,
178 unsigned long ratebs
)
182 if (strcmp(name
, statname
) != 0) {
183 for (i
= 0; i
< strlen(name
); ++i
)
184 send_msg((HWND
) atoi(gui_hwnd
), WM_STATS_CHAR
,
186 send_msg((HWND
) atoi(gui_hwnd
), WM_STATS_CHAR
, (WPARAM
) '\n');
187 strcpy(statname
, name
);
189 if (statsize
!= size
) {
190 send_msg((HWND
) atoi(gui_hwnd
), WM_STATS_SIZE
, (WPARAM
) size
);
193 if (statdone
!= done
) {
194 send_msg((HWND
) atoi(gui_hwnd
), WM_STATS_DONE
, (WPARAM
) done
);
197 if (stateta
!= eta
) {
198 send_msg((HWND
) atoi(gui_hwnd
), WM_STATS_ETA
, (WPARAM
) eta
);
201 if (statratebs
!= ratebs
) {
202 send_msg((HWND
) atoi(gui_hwnd
), WM_STATS_RATEBS
, (WPARAM
) ratebs
);
205 if (statelapsed
!= elapsed
) {
206 send_msg((HWND
) atoi(gui_hwnd
), WM_STATS_ELAPSED
,
208 statelapsed
= elapsed
;
210 if (statperct
!= percentage
) {
211 send_msg((HWND
) atoi(gui_hwnd
), WM_STATS_PERCENT
,
212 (WPARAM
) percentage
);
213 statperct
= percentage
;
218 * Print an error message and perform a fatal exit.
220 void fatalbox(char *fmt
, ...)
225 str
= dupvprintf(fmt
, ap
);
226 str2
= dupcat("Fatal: ", str
, "\n", NULL
);
229 tell_str(stderr
, str2
);
234 unsigned int msg_id
= WM_RET_ERR_CNT
;
236 msg_id
= WM_LS_RET_ERR_CNT
;
238 ((HWND
) atoi(gui_hwnd
), msg_id
, (WPARAM
) errs
,
239 0 /*lParam */ ))SleepEx(1000, TRUE
);
244 void modalfatalbox(char *fmt
, ...)
249 str
= dupvprintf(fmt
, ap
);
250 str2
= dupcat("Fatal: ", str
, "\n", NULL
);
253 tell_str(stderr
, str2
);
258 unsigned int msg_id
= WM_RET_ERR_CNT
;
260 msg_id
= WM_LS_RET_ERR_CNT
;
262 ((HWND
) atoi(gui_hwnd
), msg_id
, (WPARAM
) errs
,
263 0 /*lParam */ ))SleepEx(1000, TRUE
);
268 void connection_fatal(void *frontend
, char *fmt
, ...)
273 str
= dupvprintf(fmt
, ap
);
274 str2
= dupcat("Fatal: ", str
, "\n", NULL
);
277 tell_str(stderr
, str2
);
282 unsigned int msg_id
= WM_RET_ERR_CNT
;
284 msg_id
= WM_LS_RET_ERR_CNT
;
286 ((HWND
) atoi(gui_hwnd
), msg_id
, (WPARAM
) errs
,
287 0 /*lParam */ ))SleepEx(1000, TRUE
);
294 * Be told what socket we're supposed to be using.
296 static SOCKET scp_ssh_socket
;
297 char *do_select(SOCKET skt
, int startup
)
300 scp_ssh_socket
= skt
;
302 scp_ssh_socket
= INVALID_SOCKET
;
305 extern int select_result(WPARAM
, LPARAM
);
308 * In pscp, all agent requests should be synchronous, so this is a
311 void agent_schedule_callback(void (*callback
)(void *, void *, int),
312 void *callback_ctx
, void *data
, int len
)
314 assert(!"We shouldn't be here");
318 * Receive a block of data from the SSH link. Block until all data
321 * To do this, we repeatedly call the SSH protocol module, with our
322 * own trap in from_backend() to catch the data that comes back. We
323 * do this until we have enough data.
326 static unsigned char *outptr
; /* where to put the data */
327 static unsigned outlen
; /* how much data required */
328 static unsigned char *pending
= NULL
; /* any spare data */
329 static unsigned pendlen
= 0, pendsize
= 0; /* length and phys. size of buffer */
330 int from_backend(void *frontend
, int is_stderr
, const char *data
, int datalen
)
332 unsigned char *p
= (unsigned char *) data
;
333 unsigned len
= (unsigned) datalen
;
338 * stderr data is just spouted to local stderr and otherwise
342 fwrite(data
, 1, len
, stderr
);
347 * If this is before the real session begins, just return.
353 unsigned used
= outlen
;
356 memcpy(outptr
, p
, used
);
364 if (pendsize
< pendlen
+ len
) {
365 pendsize
= pendlen
+ len
+ 4096;
366 pending
= sresize(pending
, pendsize
, unsigned char);
368 fatalbox("Out of memory");
370 memcpy(pending
+ pendlen
, p
, len
);
376 static int scp_process_network_event(void)
381 FD_SET(scp_ssh_socket
, &readfds
);
382 if (select(1, &readfds
, NULL
, NULL
, NULL
) < 0)
384 select_result((WPARAM
) scp_ssh_socket
, (LPARAM
) FD_READ
);
387 static int ssh_scp_recv(unsigned char *buf
, int len
)
393 * See if the pending-input block contains some of what we
397 unsigned pendused
= pendlen
;
398 if (pendused
> outlen
)
400 memcpy(outptr
, pending
, pendused
);
401 memmove(pending
, pending
+ pendused
, pendlen
- pendused
);
415 if (!scp_process_network_event())
423 * Loop through the ssh connection and authentication process.
425 static void ssh_scp_init(void)
427 if (scp_ssh_socket
== INVALID_SOCKET
)
429 while (!back
->sendok(backhandle
)) {
432 FD_SET(scp_ssh_socket
, &readfds
);
433 if (select(1, &readfds
, NULL
, NULL
, NULL
) < 0)
435 select_result((WPARAM
) scp_ssh_socket
, (LPARAM
) FD_READ
);
437 using_sftp
= !ssh_fallback_cmd(backhandle
);
441 * Print an error message and exit after closing the SSH link.
443 static void bump(char *fmt
, ...)
448 str
= dupvprintf(fmt
, ap
);
450 str2
= dupcat(str
, "\n", NULL
);
452 tell_str(stderr
, str2
);
456 if (back
!= NULL
&& back
->socket(backhandle
) != NULL
) {
458 back
->special(backhandle
, TS_EOF
);
459 ssh_scp_recv(&ch
, 1);
463 unsigned int msg_id
= WM_RET_ERR_CNT
;
465 msg_id
= WM_LS_RET_ERR_CNT
;
467 ((HWND
) atoi(gui_hwnd
), msg_id
, (WPARAM
) errs
,
468 0 /*lParam */ ))SleepEx(1000, TRUE
);
475 * Open an SSH connection to user@host and execute cmd.
477 static void do_cmd(char *host
, char *user
, char *cmd
)
479 char *err
, *realhost
;
482 if (host
== NULL
|| host
[0] == '\0')
483 bump("Empty host name");
485 /* Try to load settings for this host */
486 do_defaults(host
, &cfg
);
487 if (cfg
.host
[0] == '\0') {
488 /* No settings for this host; use defaults */
489 do_defaults(NULL
, &cfg
);
490 strncpy(cfg
.host
, host
, sizeof(cfg
.host
) - 1);
491 cfg
.host
[sizeof(cfg
.host
) - 1] = '\0';
495 * Force use of SSH. (If they got the protocol wrong we assume the
496 * port is useless too.)
498 if (cfg
.protocol
!= PROT_SSH
) {
499 cfg
.protocol
= PROT_SSH
;
504 * Enact command-line overrides.
506 cmdline_run_saved(&cfg
);
509 * Trim leading whitespace off the hostname if it's there.
512 int space
= strspn(cfg
.host
, " \t");
513 memmove(cfg
.host
, cfg
.host
+space
, 1+strlen(cfg
.host
)-space
);
516 /* See if host is of the form user@host */
517 if (cfg
.host
[0] != '\0') {
518 char *atsign
= strchr(cfg
.host
, '@');
519 /* Make sure we're not overflowing the user field */
521 if (atsign
- cfg
.host
< sizeof cfg
.username
) {
522 strncpy(cfg
.username
, cfg
.host
, atsign
- cfg
.host
);
523 cfg
.username
[atsign
- cfg
.host
] = '\0';
525 memmove(cfg
.host
, atsign
+ 1, 1 + strlen(atsign
+ 1));
530 * Trim a colon suffix off the hostname if it's there.
532 cfg
.host
[strcspn(cfg
.host
, ":")] = '\0';
535 * Remove any remaining whitespace from the hostname.
539 while (cfg
.host
[p2
] != '\0') {
540 if (cfg
.host
[p2
] != ' ' && cfg
.host
[p2
] != '\t') {
541 cfg
.host
[p1
] = cfg
.host
[p2
];
550 if (user
!= NULL
&& user
[0] != '\0') {
551 strncpy(cfg
.username
, user
, sizeof(cfg
.username
) - 1);
552 cfg
.username
[sizeof(cfg
.username
) - 1] = '\0';
553 } else if (cfg
.username
[0] == '\0') {
555 if (GetUserName(user
, &namelen
) == FALSE
)
556 bump("Empty user name");
557 user
= snewn(namelen
, char);
558 GetUserName(user
, &namelen
);
560 tell_user(stderr
, "Guessing user name: %s", user
);
561 strncpy(cfg
.username
, user
, sizeof(cfg
.username
) - 1);
562 cfg
.username
[sizeof(cfg
.username
) - 1] = '\0';
567 * Disable scary things which shouldn't be enabled for simple
568 * things like SCP and SFTP: agent forwarding, port forwarding,
573 cfg
.portfwd
[0] = cfg
.portfwd
[1] = '\0';
576 * Attempt to start the SFTP subsystem as a first choice,
577 * falling back to the provided scp command if that fails.
579 strcpy(cfg
.remote_cmd
, "sftp");
580 cfg
.ssh_subsys
= TRUE
;
581 cfg
.remote_cmd_ptr2
= cmd
;
582 cfg
.ssh_subsys2
= FALSE
;
587 err
= back
->init(NULL
, &backhandle
, &cfg
, cfg
.host
, cfg
.port
, &realhost
,0);
589 bump("ssh_init: %s", err
);
590 logctx
= log_init(NULL
, &cfg
);
591 back
->provide_logctx(backhandle
, logctx
);
592 console_provide_logctx(logctx
);
594 if (verbose
&& realhost
!= NULL
)
595 tell_user(stderr
, "Connected to %s\n", realhost
);
600 * Update statistic information about current file.
602 static void print_stats(char *name
, unsigned long size
, unsigned long done
,
603 time_t start
, time_t now
)
612 elap
= (unsigned long) difftime(now
, start
);
615 ratebs
= (float) done
/ elap
;
617 ratebs
= (float) done
;
622 eta
= (unsigned long) ((size
- done
) / ratebs
);
623 sprintf(etastr
, "%02ld:%02ld:%02ld",
624 eta
/ 3600, (eta
% 3600) / 60, eta
% 60);
626 pct
= (int) (100 * (done
* 1.0 / size
));
629 /* GUI Adaptation - Sept 2000 */
630 gui_update_stats(name
, size
, pct
, elap
, done
, eta
,
631 (unsigned long) ratebs
);
633 len
= printf("\r%-25.25s | %10ld kB | %5.1f kB/s | ETA: %8s | %3d%%",
634 name
, done
/ 1024, ratebs
/ 1024.0, etastr
, pct
);
635 if (len
< prev_stats_len
)
636 printf("%*s", prev_stats_len
- len
, "");
637 prev_stats_len
= len
;
645 * Find a colon in str and return a pointer to the colon.
646 * This is used to separate hostname from filename.
648 static char *colon(char *str
)
650 /* We ignore a leading colon, since the hostname cannot be
651 empty. We also ignore a colon as second character because
652 of filenames like f:myfile.txt. */
653 if (str
[0] == '\0' || str
[0] == ':' || str
[1] == ':')
655 while (*str
!= '\0' && *str
!= ':' && *str
!= '/' && *str
!= '\\')
664 * Return a pointer to the portion of str that comes after the last
665 * slash (or backslash or colon, if `local' is TRUE).
667 static char *stripslashes(char *str
, int local
)
672 p
= strchr(str
, ':');
676 p
= strrchr(str
, '/');
680 p
= strrchr(str
, '\\');
688 * Determine whether a string is entirely composed of dots.
690 static int is_dots(char *str
)
692 return str
[strspn(str
, ".")] == '\0';
696 * Wait for a response from the other side.
697 * Return 0 if ok, -1 if error.
699 static int response(void)
701 char ch
, resp
, rbuf
[2048];
704 if (ssh_scp_recv(&resp
, 1) <= 0)
705 bump("Lost connection");
715 case 2: /* fatal error */
717 if (ssh_scp_recv(&ch
, 1) <= 0)
718 bump("Protocol error: Lost connection");
720 } while (p
< sizeof(rbuf
) && ch
!= '\n');
723 tell_user(stderr
, "%s\n", rbuf
);
731 int sftp_recvdata(char *buf
, int len
)
733 return ssh_scp_recv(buf
, len
);
735 int sftp_senddata(char *buf
, int len
)
737 back
->send(backhandle
, (unsigned char *) buf
, len
);
741 /* ----------------------------------------------------------------------
742 * sftp-based replacement for the hacky `pscp -ls'.
744 static int sftp_ls_compare(const void *av
, const void *bv
)
746 const struct fxp_name
*a
= (const struct fxp_name
*) av
;
747 const struct fxp_name
*b
= (const struct fxp_name
*) bv
;
748 return strcmp(a
->filename
, b
->filename
);
750 void scp_sftp_listdir(char *dirname
)
752 struct fxp_handle
*dirh
;
753 struct fxp_names
*names
;
754 struct fxp_name
*ournames
;
755 int nnames
, namesize
;
759 tell_user(stderr
, "unable to initialise SFTP: %s", fxp_error());
764 printf("Listing directory %s\n", dirname
);
766 dirh
= fxp_opendir(dirname
);
768 printf("Unable to open %s: %s\n", dirname
, fxp_error());
770 nnames
= namesize
= 0;
775 names
= fxp_readdir(dirh
);
777 if (fxp_error_type() == SSH_FX_EOF
)
779 printf("Reading directory %s: %s\n", dirname
, fxp_error());
782 if (names
->nnames
== 0) {
783 fxp_free_names(names
);
787 if (nnames
+ names
->nnames
>= namesize
) {
788 namesize
+= names
->nnames
+ 128;
789 ournames
= sresize(ournames
, namesize
, struct fxp_name
);
792 for (i
= 0; i
< names
->nnames
; i
++)
793 ournames
[nnames
++] = names
->names
[i
];
795 names
->nnames
= 0; /* prevent free_names */
796 fxp_free_names(names
);
801 * Now we have our filenames. Sort them by actual file
802 * name, and then output the longname parts.
804 qsort(ournames
, nnames
, sizeof(*ournames
), sftp_ls_compare
);
809 for (i
= 0; i
< nnames
; i
++)
810 printf("%s\n", ournames
[i
].longname
);
814 /* ----------------------------------------------------------------------
815 * Helper routines that contain the actual SCP protocol elements,
816 * implemented both as SCP1 and SFTP.
819 static struct scp_sftp_dirstack
{
820 struct scp_sftp_dirstack
*next
;
821 struct fxp_name
*names
;
822 int namepos
, namelen
;
825 int matched_something
; /* wildcard match set was non-empty */
826 } *scp_sftp_dirstack_head
;
827 static char *scp_sftp_remotepath
, *scp_sftp_currentname
;
828 static char *scp_sftp_wildcard
;
829 static int scp_sftp_targetisdir
, scp_sftp_donethistarget
;
830 static int scp_sftp_preserve
, scp_sftp_recursive
;
831 static unsigned long scp_sftp_mtime
, scp_sftp_atime
;
832 static int scp_has_times
;
833 static struct fxp_handle
*scp_sftp_filehandle
;
834 static uint64 scp_sftp_fileoffset
;
836 void scp_source_setup(char *target
, int shouldbedir
)
840 * Find out whether the target filespec is in fact a
843 struct fxp_attrs attrs
;
846 tell_user(stderr
, "unable to initialise SFTP: %s", fxp_error());
851 if (!fxp_stat(target
, &attrs
) ||
852 !(attrs
.flags
& SSH_FILEXFER_ATTR_PERMISSIONS
))
853 scp_sftp_targetisdir
= 0;
855 scp_sftp_targetisdir
= (attrs
.permissions
& 0040000) != 0;
857 if (shouldbedir
&& !scp_sftp_targetisdir
) {
858 bump("pscp: remote filespec %s: not a directory\n", target
);
861 scp_sftp_remotepath
= dupstr(target
);
869 int scp_send_errmsg(char *str
)
872 /* do nothing; we never need to send our errors to the server */
874 back
->send(backhandle
, "\001", 1);/* scp protocol error prefix */
875 back
->send(backhandle
, str
, strlen(str
));
877 return 0; /* can't fail */
880 int scp_send_filetimes(unsigned long mtime
, unsigned long atime
)
883 scp_sftp_mtime
= mtime
;
884 scp_sftp_atime
= atime
;
889 sprintf(buf
, "T%lu 0 %lu 0\n", mtime
, atime
);
890 back
->send(backhandle
, buf
, strlen(buf
));
895 int scp_send_filename(char *name
, unsigned long size
, int modes
)
899 if (scp_sftp_targetisdir
) {
900 fullname
= dupcat(scp_sftp_remotepath
, "/", name
, NULL
);
902 fullname
= dupstr(scp_sftp_remotepath
);
904 scp_sftp_filehandle
=
905 fxp_open(fullname
, SSH_FXF_WRITE
| SSH_FXF_CREAT
| SSH_FXF_TRUNC
);
906 if (!scp_sftp_filehandle
) {
907 tell_user(stderr
, "pscp: unable to open %s: %s",
908 fullname
, fxp_error());
912 scp_sftp_fileoffset
= uint64_make(0, 0);
917 sprintf(buf
, "C%04o %lu ", modes
, size
);
918 back
->send(backhandle
, buf
, strlen(buf
));
919 back
->send(backhandle
, name
, strlen(name
));
920 back
->send(backhandle
, "\n", 1);
925 int scp_send_filedata(char *data
, int len
)
928 if (!scp_sftp_filehandle
) {
931 if (!fxp_write(scp_sftp_filehandle
, data
, scp_sftp_fileoffset
, len
)) {
932 tell_user(stderr
, "error while writing: %s\n", fxp_error());
936 scp_sftp_fileoffset
= uint64_add32(scp_sftp_fileoffset
, len
);
939 int bufsize
= back
->send(backhandle
, data
, len
);
942 * If the network transfer is backing up - that is, the
943 * remote site is not accepting data as fast as we can
944 * produce it - then we must loop on network events until
945 * we have space in the buffer again.
947 while (bufsize
> MAX_SCP_BUFSIZE
) {
948 if (!scp_process_network_event())
950 bufsize
= back
->sendbuffer(backhandle
);
957 int scp_send_finish(void)
960 struct fxp_attrs attrs
;
961 if (!scp_sftp_filehandle
) {
965 attrs
.flags
= SSH_FILEXFER_ATTR_ACMODTIME
;
966 attrs
.atime
= scp_sftp_atime
;
967 attrs
.mtime
= scp_sftp_mtime
;
968 if (!fxp_fsetstat(scp_sftp_filehandle
, attrs
)) {
969 tell_user(stderr
, "unable to set file times: %s\n", fxp_error());
973 fxp_close(scp_sftp_filehandle
);
977 back
->send(backhandle
, "", 1);
982 char *scp_save_remotepath(void)
985 return scp_sftp_remotepath
;
990 void scp_restore_remotepath(char *data
)
993 scp_sftp_remotepath
= data
;
996 int scp_send_dirname(char *name
, int modes
)
1001 struct fxp_attrs attrs
;
1002 if (scp_sftp_targetisdir
) {
1003 fullname
= dupcat(scp_sftp_remotepath
, "/", name
, NULL
);
1005 fullname
= dupstr(scp_sftp_remotepath
);
1009 * We don't worry about whether we managed to create the
1010 * directory, because if it exists already it's OK just to
1011 * use it. Instead, we will stat it afterwards, and if it
1012 * exists and is a directory we will assume we were either
1013 * successful or it didn't matter.
1015 if (!fxp_mkdir(fullname
))
1018 err
= "server reported no error";
1019 if (!fxp_stat(fullname
, &attrs
) ||
1020 !(attrs
.flags
& SSH_FILEXFER_ATTR_PERMISSIONS
) ||
1021 !(attrs
.permissions
& 0040000)) {
1022 tell_user(stderr
, "unable to create directory %s: %s",
1028 scp_sftp_remotepath
= fullname
;
1033 sprintf(buf
, "D%04o 0 ", modes
);
1034 back
->send(backhandle
, buf
, strlen(buf
));
1035 back
->send(backhandle
, name
, strlen(name
));
1036 back
->send(backhandle
, "\n", 1);
1041 int scp_send_enddir(void)
1044 sfree(scp_sftp_remotepath
);
1047 back
->send(backhandle
, "E\n", 2);
1053 * Yes, I know; I have an scp_sink_setup _and_ an scp_sink_init.
1054 * That's bad. The difference is that scp_sink_setup is called once
1055 * right at the start, whereas scp_sink_init is called to
1056 * initialise every level of recursion in the protocol.
1058 int scp_sink_setup(char *source
, int preserve
, int recursive
)
1064 tell_user(stderr
, "unable to initialise SFTP: %s", fxp_error());
1069 * It's possible that the source string we've been given
1070 * contains a wildcard. If so, we must split the directory
1071 * away from the wildcard itself (throwing an error if any
1072 * wildcardness comes before the final slash) and arrange
1073 * things so that a dirstack entry will be set up.
1075 newsource
= snewn(1+strlen(source
), char);
1076 if (!wc_unescape(newsource
, source
)) {
1077 /* Yes, here we go; it's a wildcard. Bah. */
1078 char *dupsource
, *lastpart
, *dirpart
, *wildcard
;
1079 dupsource
= dupstr(source
);
1080 lastpart
= stripslashes(dupsource
, 0);
1081 wildcard
= dupstr(lastpart
);
1083 if (*dupsource
&& dupsource
[1]) {
1085 * The remains of dupsource are at least two
1086 * characters long, meaning the pathname wasn't
1087 * empty or just `/'. Hence, we remove the trailing
1090 lastpart
[-1] = '\0';
1091 } else if (!*dupsource
) {
1093 * The remains of dupsource are _empty_ - the whole
1094 * pathname was a wildcard. Hence we need to
1095 * replace it with ".".
1098 dupsource
= dupstr(".");
1102 * Now we have separated our string into dupsource (the
1103 * directory part) and wildcard. Both of these will
1104 * need freeing at some point. Next step is to remove
1105 * wildcard escapes from the directory part, throwing
1106 * an error if it contains a real wildcard.
1108 dirpart
= snewn(1+strlen(dupsource
), char);
1109 if (!wc_unescape(dirpart
, dupsource
)) {
1110 tell_user(stderr
, "%s: multiple-level wildcards unsupported",
1120 * Now we have dirpart (unescaped, ie a valid remote
1121 * path), and wildcard (a wildcard). This will be
1122 * sufficient to arrange a dirstack entry.
1124 scp_sftp_remotepath
= dirpart
;
1125 scp_sftp_wildcard
= wildcard
;
1128 scp_sftp_remotepath
= newsource
;
1129 scp_sftp_wildcard
= NULL
;
1131 scp_sftp_preserve
= preserve
;
1132 scp_sftp_recursive
= recursive
;
1133 scp_sftp_donethistarget
= 0;
1134 scp_sftp_dirstack_head
= NULL
;
1139 int scp_sink_init(void)
1142 back
->send(backhandle
, "", 1);
1147 #define SCP_SINK_FILE 1
1148 #define SCP_SINK_DIR 2
1149 #define SCP_SINK_ENDDIR 3
1150 #define SCP_SINK_RETRY 4 /* not an action; just try again */
1151 struct scp_sink_action
{
1152 int action
; /* FILE, DIR, ENDDIR */
1153 char *buf
; /* will need freeing after use */
1154 char *name
; /* filename or dirname (not ENDDIR) */
1155 int mode
; /* access mode (not ENDDIR) */
1156 unsigned long size
; /* file size (not ENDDIR) */
1157 int settime
; /* 1 if atime and mtime are filled */
1158 unsigned long atime
, mtime
; /* access times for the file */
1161 int scp_get_sink_action(struct scp_sink_action
*act
)
1165 int must_free_fname
;
1166 struct fxp_attrs attrs
;
1169 if (!scp_sftp_dirstack_head
) {
1170 if (!scp_sftp_donethistarget
) {
1172 * Simple case: we are only dealing with one file.
1174 fname
= scp_sftp_remotepath
;
1175 must_free_fname
= 0;
1176 scp_sftp_donethistarget
= 1;
1179 * Even simpler case: one file _which we've done_.
1180 * Return 1 (finished).
1186 * We're now in the middle of stepping through a list
1187 * of names returned from fxp_readdir(); so let's carry
1190 struct scp_sftp_dirstack
*head
= scp_sftp_dirstack_head
;
1191 while (head
->namepos
< head
->namelen
&&
1192 (is_dots(head
->names
[head
->namepos
].filename
) ||
1194 !wc_match(head
->wildcard
,
1195 head
->names
[head
->namepos
].filename
))))
1196 head
->namepos
++; /* skip . and .. */
1197 if (head
->namepos
< head
->namelen
) {
1198 head
->matched_something
= 1;
1199 fname
= dupcat(head
->dirpath
, "/",
1200 head
->names
[head
->namepos
++].filename
,
1202 must_free_fname
= 1;
1205 * We've come to the end of the list; pop it off
1206 * the stack and return an ENDDIR action (or RETRY
1207 * if this was a wildcard match).
1209 if (head
->wildcard
) {
1210 act
->action
= SCP_SINK_RETRY
;
1211 if (!head
->matched_something
) {
1212 tell_user(stderr
, "pscp: wildcard '%s' matched "
1213 "no files", head
->wildcard
);
1216 sfree(head
->wildcard
);
1219 act
->action
= SCP_SINK_ENDDIR
;
1222 sfree(head
->dirpath
);
1224 scp_sftp_dirstack_head
= head
->next
;
1232 * Now we have a filename. Stat it, and see if it's a file
1235 ret
= fxp_stat(fname
, &attrs
);
1236 if (!ret
|| !(attrs
.flags
& SSH_FILEXFER_ATTR_PERMISSIONS
)) {
1237 tell_user(stderr
, "unable to identify %s: %s", fname
,
1238 ret ?
"file type not supplied" : fxp_error());
1243 if (attrs
.permissions
& 0040000) {
1244 struct scp_sftp_dirstack
*newitem
;
1245 struct fxp_handle
*dirhandle
;
1246 int nnames
, namesize
;
1247 struct fxp_name
*ournames
;
1248 struct fxp_names
*names
;
1251 * It's a directory. If we're not in recursive mode,
1252 * this merits a complaint (which is fatal if the name
1253 * was specified directly, but not if it was matched by
1256 * We skip this complaint completely if
1257 * scp_sftp_wildcard is set, because that's an
1258 * indication that we're not actually supposed to
1259 * _recursively_ transfer the dir, just scan it for
1260 * things matching the wildcard.
1262 if (!scp_sftp_recursive
&& !scp_sftp_wildcard
) {
1263 tell_user(stderr
, "pscp: %s: is a directory", fname
);
1265 if (must_free_fname
) sfree(fname
);
1266 if (scp_sftp_dirstack_head
) {
1267 act
->action
= SCP_SINK_RETRY
;
1275 * Otherwise, the fun begins. We must fxp_opendir() the
1276 * directory, slurp the filenames into memory, return
1277 * SCP_SINK_DIR (unless this is a wildcard match), and
1278 * set targetisdir. The next time we're called, we will
1279 * run through the list of filenames one by one,
1280 * matching them against a wildcard if present.
1282 * If targetisdir is _already_ set (meaning we're
1283 * already in the middle of going through another such
1284 * list), we must push the other (target,namelist) pair
1287 dirhandle
= fxp_opendir(fname
);
1289 tell_user(stderr
, "scp: unable to open directory %s: %s",
1290 fname
, fxp_error());
1291 if (must_free_fname
) sfree(fname
);
1295 nnames
= namesize
= 0;
1300 names
= fxp_readdir(dirhandle
);
1301 if (names
== NULL
) {
1302 if (fxp_error_type() == SSH_FX_EOF
)
1304 tell_user(stderr
, "scp: reading directory %s: %s\n",
1305 fname
, fxp_error());
1306 if (must_free_fname
) sfree(fname
);
1311 if (names
->nnames
== 0) {
1312 fxp_free_names(names
);
1315 if (nnames
+ names
->nnames
>= namesize
) {
1316 namesize
+= names
->nnames
+ 128;
1317 ournames
= sresize(ournames
, namesize
, struct fxp_name
);
1319 for (i
= 0; i
< names
->nnames
; i
++)
1320 ournames
[nnames
++] = names
->names
[i
];
1321 names
->nnames
= 0; /* prevent free_names */
1322 fxp_free_names(names
);
1324 fxp_close(dirhandle
);
1326 newitem
= snew(struct scp_sftp_dirstack
);
1327 newitem
->next
= scp_sftp_dirstack_head
;
1328 newitem
->names
= ournames
;
1329 newitem
->namepos
= 0;
1330 newitem
->namelen
= nnames
;
1331 if (must_free_fname
)
1332 newitem
->dirpath
= fname
;
1334 newitem
->dirpath
= dupstr(fname
);
1335 if (scp_sftp_wildcard
) {
1336 newitem
->wildcard
= scp_sftp_wildcard
;
1337 newitem
->matched_something
= 0;
1338 scp_sftp_wildcard
= NULL
;
1340 newitem
->wildcard
= NULL
;
1342 scp_sftp_dirstack_head
= newitem
;
1344 if (newitem
->wildcard
) {
1345 act
->action
= SCP_SINK_RETRY
;
1347 act
->action
= SCP_SINK_DIR
;
1348 act
->buf
= dupstr(stripslashes(fname
, 0));
1349 act
->name
= act
->buf
;
1350 act
->size
= 0; /* duhh, it's a directory */
1351 act
->mode
= 07777 & attrs
.permissions
;
1352 if (scp_sftp_preserve
&&
1353 (attrs
.flags
& SSH_FILEXFER_ATTR_ACMODTIME
)) {
1354 act
->atime
= attrs
.atime
;
1355 act
->mtime
= attrs
.mtime
;
1364 * It's a file. Return SCP_SINK_FILE.
1366 act
->action
= SCP_SINK_FILE
;
1367 act
->buf
= dupstr(stripslashes(fname
, 0));
1368 act
->name
= act
->buf
;
1369 if (attrs
.flags
& SSH_FILEXFER_ATTR_SIZE
) {
1370 if (uint64_compare(attrs
.size
,
1371 uint64_make(0, ULONG_MAX
)) > 0) {
1372 act
->size
= ULONG_MAX
; /* *boggle* */
1374 act
->size
= attrs
.size
.lo
;
1376 act
->size
= ULONG_MAX
; /* no idea */
1377 act
->mode
= 07777 & attrs
.permissions
;
1378 if (scp_sftp_preserve
&&
1379 (attrs
.flags
& SSH_FILEXFER_ATTR_ACMODTIME
)) {
1380 act
->atime
= attrs
.atime
;
1381 act
->mtime
= attrs
.mtime
;
1385 if (must_free_fname
)
1386 scp_sftp_currentname
= fname
;
1388 scp_sftp_currentname
= dupstr(fname
);
1403 if (ssh_scp_recv(&ch
, 1) <= 0)
1406 bump("Protocol error: Unexpected newline");
1410 if (ssh_scp_recv(&ch
, 1) <= 0)
1411 bump("Lost connection");
1414 act
->buf
= sresize(act
->buf
, bufsize
, char);
1417 } while (ch
!= '\n');
1418 act
->buf
[i
- 1] = '\0';
1420 case '\01': /* error */
1421 tell_user(stderr
, "%s\n", act
->buf
);
1423 continue; /* go round again */
1424 case '\02': /* fatal error */
1425 bump("%s", act
->buf
);
1427 back
->send(backhandle
, "", 1);
1428 act
->action
= SCP_SINK_ENDDIR
;
1431 if (sscanf(act
->buf
, "%ld %*d %ld %*d",
1432 &act
->mtime
, &act
->atime
) == 2) {
1434 back
->send(backhandle
, "", 1);
1435 continue; /* go round again */
1437 bump("Protocol error: Illegal time format");
1440 act
->action
= (action
== 'C' ? SCP_SINK_FILE
: SCP_SINK_DIR
);
1443 bump("Protocol error: Expected control record");
1446 * We will go round this loop only once, unless we hit
1453 * If we get here, we must have seen SCP_SINK_FILE or
1456 if (sscanf(act
->buf
, "%o %lu %n", &act
->mode
, &act
->size
, &i
) != 2)
1457 bump("Protocol error: Illegal file descriptor format");
1458 act
->name
= act
->buf
+ i
;
1463 int scp_accept_filexfer(void)
1466 scp_sftp_filehandle
=
1467 fxp_open(scp_sftp_currentname
, SSH_FXF_READ
);
1468 if (!scp_sftp_filehandle
) {
1469 tell_user(stderr
, "pscp: unable to open %s: %s",
1470 scp_sftp_currentname
, fxp_error());
1474 scp_sftp_fileoffset
= uint64_make(0, 0);
1475 sfree(scp_sftp_currentname
);
1478 back
->send(backhandle
, "", 1);
1479 return 0; /* can't fail */
1483 int scp_recv_filedata(char *data
, int len
)
1486 int actuallen
= fxp_read(scp_sftp_filehandle
, data
,
1487 scp_sftp_fileoffset
, len
);
1488 if (actuallen
== -1 && fxp_error_type() != SSH_FX_EOF
) {
1489 tell_user(stderr
, "pscp: error while reading: %s", fxp_error());
1496 scp_sftp_fileoffset
= uint64_add32(scp_sftp_fileoffset
, actuallen
);
1500 return ssh_scp_recv(data
, len
);
1504 int scp_finish_filerecv(void)
1507 fxp_close(scp_sftp_filehandle
);
1510 back
->send(backhandle
, "", 1);
1515 /* ----------------------------------------------------------------------
1516 * Send an error message to the other side and to the screen.
1517 * Increment error counter.
1519 static void run_err(const char *fmt
, ...)
1525 str
= dupvprintf(fmt
, ap
);
1526 str2
= dupcat("scp: ", str
, "\n", NULL
);
1528 scp_send_errmsg(str2
);
1529 tell_user(stderr
, "%s", str2
);
1535 * Execute the source part of the SCP protocol.
1537 static void source(char *src
)
1544 unsigned long stat_bytes
;
1545 time_t stat_starttime
, stat_lasttime
;
1547 attr
= GetFileAttributes(src
);
1548 if (attr
== (DWORD
) - 1) {
1549 run_err("%s: No such file or directory", src
);
1553 if ((attr
& FILE_ATTRIBUTE_DIRECTORY
) != 0) {
1556 * Avoid . and .. directories.
1559 p
= strrchr(src
, '/');
1561 p
= strrchr(src
, '\\');
1566 if (!strcmp(p
, ".") || !strcmp(p
, ".."))
1567 /* skip . and .. */ ;
1571 run_err("%s: not a regular file", src
);
1576 if ((last
= strrchr(src
, '/')) == NULL
)
1580 if (strrchr(last
, '\\') != NULL
)
1581 last
= strrchr(last
, '\\') + 1;
1582 if (last
== src
&& strchr(src
, ':') != NULL
)
1583 last
= strchr(src
, ':') + 1;
1585 f
= CreateFile(src
, GENERIC_READ
, FILE_SHARE_READ
, NULL
,
1586 OPEN_EXISTING
, 0, 0);
1587 if (f
== INVALID_HANDLE_VALUE
) {
1588 run_err("%s: Cannot open file", src
);
1593 FILETIME actime
, wrtime
;
1594 unsigned long mtime
, atime
;
1595 GetFileTime(f
, NULL
, &actime
, &wrtime
);
1596 TIME_WIN_TO_POSIX(actime
, atime
);
1597 TIME_WIN_TO_POSIX(wrtime
, mtime
);
1598 if (scp_send_filetimes(mtime
, atime
))
1602 size
= GetFileSize(f
, NULL
);
1604 tell_user(stderr
, "Sending file %s, size=%lu", last
, size
);
1605 if (scp_send_filename(last
, size
, 0644))
1609 stat_starttime
= time(NULL
);
1612 for (i
= 0; i
< size
; i
+= 4096) {
1613 char transbuf
[4096];
1618 if (!ReadFile(f
, transbuf
, k
, &j
, NULL
) || j
!= k
) {
1621 bump("%s: Read error", src
);
1623 if (scp_send_filedata(transbuf
, k
))
1624 bump("%s: Network error occurred", src
);
1628 if (time(NULL
) != stat_lasttime
|| i
+ k
== size
) {
1629 stat_lasttime
= time(NULL
);
1630 print_stats(last
, size
, stat_bytes
,
1631 stat_starttime
, stat_lasttime
);
1638 (void) scp_send_finish();
1642 * Recursively send the contents of a directory.
1644 static void rsource(char *src
)
1646 char *last
, *findfile
;
1649 WIN32_FIND_DATA fdat
;
1652 if ((last
= strrchr(src
, '/')) == NULL
)
1656 if (strrchr(last
, '\\') != NULL
)
1657 last
= strrchr(last
, '\\') + 1;
1658 if (last
== src
&& strchr(src
, ':') != NULL
)
1659 last
= strchr(src
, ':') + 1;
1661 /* maybe send filetime */
1663 save_target
= scp_save_remotepath();
1666 tell_user(stderr
, "Entering directory: %s", last
);
1667 if (scp_send_dirname(last
, 0755))
1670 findfile
= dupcat(src
, "/*", NULL
);
1671 dir
= FindFirstFile(findfile
, &fdat
);
1672 ok
= (dir
!= INVALID_HANDLE_VALUE
);
1674 if (strcmp(fdat
.cFileName
, ".") == 0 ||
1675 strcmp(fdat
.cFileName
, "..") == 0) {
1676 /* ignore . and .. */
1678 char *foundfile
= dupcat(src
, "/", fdat
.cFileName
, NULL
);
1682 ok
= FindNextFile(dir
, &fdat
);
1687 (void) scp_send_enddir();
1689 scp_restore_remotepath(save_target
);
1693 * Execute the sink part of the SCP protocol.
1695 static void sink(char *targ
, char *src
)
1702 unsigned long received
;
1704 unsigned long stat_bytes
;
1705 time_t stat_starttime
, stat_lasttime
;
1708 attr
= GetFileAttributes(targ
);
1709 if (attr
!= (DWORD
) - 1 && (attr
& FILE_ATTRIBUTE_DIRECTORY
) != 0)
1712 if (targetshouldbedirectory
&& !targisdir
)
1713 bump("%s: Not a directory", targ
);
1717 struct scp_sink_action act
;
1718 if (scp_get_sink_action(&act
))
1721 if (act
.action
== SCP_SINK_ENDDIR
)
1724 if (act
.action
== SCP_SINK_RETRY
)
1729 * Prevent the remote side from maliciously writing to
1730 * files outside the target area by sending a filename
1731 * containing `../'. In fact, it shouldn't be sending
1732 * filenames with any slashes or colons in at all; so
1733 * we'll find the last slash, backslash or colon in the
1734 * filename and use only the part after that. (And
1737 * In addition, we also ensure here that if we're
1738 * copying a single file and the target is a directory
1739 * (common usage: `pscp host:filename .') the remote
1740 * can't send us a _different_ file name. We can
1741 * distinguish this case because `src' will be non-NULL
1742 * and the last component of that will fail to match
1743 * (the last component of) the name sent.
1745 * Well, not always; if `src' is a wildcard, we do
1746 * expect to get back filenames that don't correspond
1747 * exactly to it. Ideally in this case, we would like
1748 * to ensure that the returned filename actually
1749 * matches the wildcard pattern - but one of SCP's
1750 * protocol infelicities is that wildcard matching is
1751 * done at the server end _by the server's rules_ and
1752 * so in general this is infeasible. Hence, we only
1753 * accept filenames that don't correspond to `src' if
1754 * unsafe mode is enabled or we are using SFTP (which
1755 * resolves remote wildcards on the client side and can
1758 char *striptarget
, *stripsrc
;
1760 striptarget
= stripslashes(act
.name
, 1);
1761 if (striptarget
!= act
.name
) {
1762 tell_user(stderr
, "warning: remote host sent a compound"
1763 " pathname '%s'", act
.name
);
1764 tell_user(stderr
, " renaming local file to '%s'",
1769 * Also check to see if the target filename is '.' or
1770 * '..', or indeed '...' and so on because Windows
1771 * appears to interpret those like '..'.
1773 if (is_dots(striptarget
)) {
1774 bump("security violation: remote host attempted to write to"
1775 " a '.' or '..' path!");
1779 stripsrc
= stripslashes(src
, 1);
1780 if (strcmp(striptarget
, stripsrc
) &&
1781 !using_sftp
&& !scp_unsafe_mode
) {
1782 tell_user(stderr
, "warning: remote host tried to write "
1783 "to a file called '%s'", striptarget
);
1784 tell_user(stderr
, " when we requested a file "
1785 "called '%s'.", stripsrc
);
1786 tell_user(stderr
, " If this is a wildcard, "
1787 "consider upgrading to SSH 2 or using");
1788 tell_user(stderr
, " the '-unsafe' option. Renaming"
1789 " of this file has been disallowed.");
1790 /* Override the name the server provided with our own. */
1791 striptarget
= stripsrc
;
1795 if (targ
[0] != '\0')
1796 destfname
= dupcat(targ
, "\\", striptarget
, NULL
);
1798 destfname
= dupstr(striptarget
);
1801 * In this branch of the if, the target area is a
1802 * single file with an explicitly specified name in any
1803 * case, so there's no danger.
1805 destfname
= dupstr(targ
);
1807 attr
= GetFileAttributes(destfname
);
1808 exists
= (attr
!= (DWORD
) - 1);
1810 if (act
.action
== SCP_SINK_DIR
) {
1811 if (exists
&& (attr
& FILE_ATTRIBUTE_DIRECTORY
) == 0) {
1812 run_err("%s: Not a directory", destfname
);
1816 if (!CreateDirectory(destfname
, NULL
)) {
1817 run_err("%s: Cannot create directory", destfname
);
1821 sink(destfname
, NULL
);
1822 /* can we set the timestamp for directories ? */
1826 f
= CreateFile(destfname
, GENERIC_WRITE
, 0, NULL
,
1827 CREATE_ALWAYS
, FILE_ATTRIBUTE_NORMAL
, 0);
1828 if (f
== INVALID_HANDLE_VALUE
) {
1829 run_err("%s: Cannot create file", destfname
);
1833 if (scp_accept_filexfer())
1837 stat_starttime
= time(NULL
);
1839 stat_name
= stripslashes(destfname
, 1);
1842 while (received
< act
.size
) {
1843 char transbuf
[4096];
1844 DWORD blksize
, read
, written
;
1846 if (blksize
> act
.size
- received
)
1847 blksize
= act
.size
- received
;
1848 read
= scp_recv_filedata(transbuf
, blksize
);
1850 bump("Lost connection");
1853 if (!WriteFile(f
, transbuf
, read
, &written
, NULL
) ||
1856 /* FIXME: in sftp we can actually abort the transfer */
1858 printf("\r%-25.25s | %50s\n",
1860 "Write error.. waiting for end of file");
1865 if (time(NULL
) > stat_lasttime
||
1866 received
+ read
== act
.size
) {
1867 stat_lasttime
= time(NULL
);
1868 print_stats(stat_name
, act
.size
, stat_bytes
,
1869 stat_starttime
, stat_lasttime
);
1875 FILETIME actime
, wrtime
;
1876 TIME_POSIX_TO_WIN(act
.atime
, actime
);
1877 TIME_POSIX_TO_WIN(act
.mtime
, wrtime
);
1878 SetFileTime(f
, NULL
, &actime
, &wrtime
);
1883 run_err("%s: Write error", destfname
);
1886 (void) scp_finish_filerecv();
1893 * We will copy local files to a remote server.
1895 static void toremote(int argc
, char *argv
[])
1897 char *src
, *targ
, *host
, *user
;
1901 targ
= argv
[argc
- 1];
1903 /* Separate host from filename */
1907 bump("targ == NULL in toremote()");
1911 /* Substitute "." for emtpy target */
1913 /* Separate host and username */
1915 host
= strrchr(host
, '@');
1926 /* Find out if the source filespec covers multiple files
1927 if so, we should set the targetshouldbedirectory flag */
1929 WIN32_FIND_DATA fdat
;
1930 if (colon(argv
[0]) != NULL
)
1931 bump("%s: Remote to remote not supported", argv
[0]);
1932 fh
= FindFirstFile(argv
[0], &fdat
);
1933 if (fh
== INVALID_HANDLE_VALUE
)
1934 bump("%s: No such file or directory\n", argv
[0]);
1935 if (FindNextFile(fh
, &fdat
))
1936 targetshouldbedirectory
= 1;
1940 cmd
= dupprintf("scp%s%s%s%s -t %s",
1941 verbose ?
" -v" : "",
1942 recursive ?
" -r" : "",
1943 preserve ?
" -p" : "",
1944 targetshouldbedirectory ?
" -d" : "", targ
);
1945 do_cmd(host
, user
, cmd
);
1948 scp_source_setup(targ
, targetshouldbedirectory
);
1950 for (i
= 0; i
< argc
- 1; i
++) {
1951 char *srcpath
, *last
;
1953 WIN32_FIND_DATA fdat
;
1955 if (colon(src
) != NULL
) {
1956 tell_user(stderr
, "%s: Remote to remote not supported\n", src
);
1962 * Trim off the last pathname component of `src', to
1963 * provide the base pathname which will be prepended to
1964 * filenames returned from Find{First,Next}File.
1966 srcpath
= dupstr(src
);
1967 last
= stripslashes(srcpath
, 1);
1970 dir
= FindFirstFile(src
, &fdat
);
1971 if (dir
== INVALID_HANDLE_VALUE
) {
1972 run_err("%s: No such file or directory", src
);
1978 * Ensure that . and .. are never matched by wildcards,
1979 * but only by deliberate action.
1981 if (!strcmp(fdat
.cFileName
, ".") ||
1982 !strcmp(fdat
.cFileName
, "..")) {
1984 * Find*File has returned a special dir. We require
1985 * that _either_ `src' ends in a backslash followed
1986 * by that string, _or_ `src' is precisely that
1989 int len
= strlen(src
), dlen
= strlen(fdat
.cFileName
);
1990 if (len
== dlen
&& !strcmp(src
, fdat
.cFileName
)) {
1992 } else if (len
> dlen
+ 1 && src
[len
- dlen
- 1] == '\\' &&
1993 !strcmp(src
+ len
- dlen
, fdat
.cFileName
)) {
1996 continue; /* ignore this one */
1998 filename
= dupcat(srcpath
, fdat
.cFileName
, NULL
);
2001 } while (FindNextFile(dir
, &fdat
));
2008 * We will copy files from a remote server to the local machine.
2010 static void tolocal(int argc
, char *argv
[])
2012 char *src
, *targ
, *host
, *user
;
2016 bump("More than one remote source not supported");
2021 /* Separate host from filename */
2025 bump("Local to local copy not supported");
2029 /* Substitute "." for empty filename */
2031 /* Separate username and hostname */
2033 host
= strrchr(host
, '@');
2043 cmd
= dupprintf("scp%s%s%s%s -f %s",
2044 verbose ?
" -v" : "",
2045 recursive ?
" -r" : "",
2046 preserve ?
" -p" : "",
2047 targetshouldbedirectory ?
" -d" : "", src
);
2048 do_cmd(host
, user
, cmd
);
2051 if (scp_sink_setup(src
, preserve
, recursive
))
2058 * We will issue a list command to get a remote directory.
2060 static void get_dir_list(int argc
, char *argv
[])
2062 char *src
, *host
, *user
;
2068 /* Separate host from filename */
2072 bump("Local to local copy not supported");
2076 /* Substitute "." for empty filename */
2078 /* Separate username and hostname */
2080 host
= strrchr(host
, '@');
2090 cmd
= snewn(4 * strlen(src
) + 100, char);
2091 strcpy(cmd
, "ls -la '");
2092 p
= cmd
+ strlen(cmd
);
2093 for (q
= src
; *q
; q
++) {
2106 do_cmd(host
, user
, cmd
);
2110 scp_sftp_listdir(src
);
2112 while (ssh_scp_recv(&c
, 1) > 0)
2113 tell_char(stdout
, c
);
2118 * Initialize the Win$ock driver.
2120 static void init_winsock(void)
2125 winsock_ver
= MAKEWORD(1, 1);
2126 if (WSAStartup(winsock_ver
, &wsadata
))
2127 bump("Unable to initialise WinSock");
2128 if (LOBYTE(wsadata
.wVersion
) != 1 || HIBYTE(wsadata
.wVersion
) != 1)
2129 bump("WinSock version is incompatible with 1.1");
2133 * Short description of parameters.
2135 static void usage(void)
2137 printf("PuTTY Secure Copy client\n");
2138 printf("%s\n", ver
);
2139 printf("Usage: pscp [options] [user@]host:source target\n");
2141 (" pscp [options] source [source...] [user@]host:target\n");
2142 printf(" pscp [options] -ls user@host:filespec\n");
2143 printf("Options:\n");
2144 printf(" -p preserve file attributes\n");
2145 printf(" -q quiet, don't show statistics\n");
2146 printf(" -r copy directories recursively\n");
2147 printf(" -v show verbose messages\n");
2148 printf(" -load sessname Load settings from saved session\n");
2149 printf(" -P port connect to specified port\n");
2150 printf(" -l user connect with specified username\n");
2151 printf(" -pw passw login with specified password\n");
2152 printf(" -1 -2 force use of particular SSH protocol version\n");
2153 printf(" -C enable compression\n");
2154 printf(" -i key private key file for authentication\n");
2155 printf(" -batch disable all interactive prompts\n");
2156 printf(" -unsafe allow server-side wildcards (DANGEROUS)\n");
2159 * -gui is an internal option, used by GUI front ends to get
2160 * pscp to pass progress reports back to them. It's not an
2161 * ordinary user-accessible option, so it shouldn't be part of
2162 * the command-line help. The only people who need to know
2163 * about it are programmers, and they can read the source.
2166 (" -gui hWnd GUI mode with the windows handle for receiving messages\n");
2171 void cmdline_error(char *p
, ...)
2174 fprintf(stderr
, "pscp: ");
2176 vfprintf(stderr
, p
, ap
);
2178 fprintf(stderr
, "\n try typing just \"pscp\" for help\n");
2183 * Main program (no, really?)
2185 int main(int argc
, char *argv
[])
2189 default_protocol
= PROT_TELNET
;
2191 flags
= FLAG_STDERR
| FLAG_SYNCAGENT
;
2192 cmdline_tooltype
= TOOLTYPE_FILETRANSFER
;
2193 ssh_get_line
= &console_get_line
;
2197 for (i
= 1; i
< argc
; i
++) {
2199 if (argv
[i
][0] != '-')
2201 ret
= cmdline_process_param(argv
[i
], i
+1<argc?argv
[i
+1]:NULL
, 1, &cfg
);
2203 cmdline_error("option \"%s\" requires an argument", argv
[i
]);
2204 } else if (ret
== 2) {
2205 i
++; /* skip next argument */
2206 } else if (ret
== 1) {
2207 /* We have our own verbosity in addition to `flags'. */
2208 if (flags
& FLAG_VERBOSE
)
2210 } else if (strcmp(argv
[i
], "-r") == 0) {
2212 } else if (strcmp(argv
[i
], "-p") == 0) {
2214 } else if (strcmp(argv
[i
], "-q") == 0) {
2216 } else if (strcmp(argv
[i
], "-h") == 0 || strcmp(argv
[i
], "-?") == 0) {
2218 } else if (strcmp(argv
[i
], "-gui") == 0 && i
+ 1 < argc
) {
2219 gui_hwnd
= argv
[++i
];
2221 console_batch_mode
= TRUE
;
2222 } else if (strcmp(argv
[i
], "-ls") == 0) {
2224 } else if (strcmp(argv
[i
], "-batch") == 0) {
2225 console_batch_mode
= 1;
2226 } else if (strcmp(argv
[i
], "-unsafe") == 0) {
2227 scp_unsafe_mode
= 1;
2228 } else if (strcmp(argv
[i
], "--") == 0) {
2232 cmdline_error("unknown option \"%s\"", argv
[i
]);
2242 get_dir_list(argc
, argv
);
2249 targetshouldbedirectory
= 1;
2251 if (colon(argv
[argc
- 1]) != NULL
)
2252 toremote(argc
, argv
);
2254 tolocal(argc
, argv
);
2257 if (back
!= NULL
&& back
->socket(backhandle
) != NULL
) {
2259 back
->special(backhandle
, TS_EOF
);
2260 ssh_scp_recv(&ch
, 1);
2265 /* GUI Adaptation - August 2000 */
2267 unsigned int msg_id
= WM_RET_ERR_CNT
;
2269 msg_id
= WM_LS_RET_ERR_CNT
;
2271 ((HWND
) atoi(gui_hwnd
), msg_id
, (WPARAM
) errs
,
2272 0 /*lParam */ ))SleepEx(1000, TRUE
);
2274 return (errs
== 0 ?
0 : 1);