From d839253b7aa9ce121b56a92b05b69ba75cfc34e8 Mon Sep 17 00:00:00 2001 From: Jonas Fonseca Date: Mon, 29 May 2006 21:36:57 +0200 Subject: [PATCH] Split out manual material to separate file --- Makefile | 13 ++- manual.txt | 386 +++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++ tig.c | 342 +++--------------------------------------------------- 3 files changed, 413 insertions(+), 328 deletions(-) create mode 100644 manual.txt diff --git a/Makefile b/Makefile index 1a3dc15..ac545e6 100644 --- a/Makefile +++ b/Makefile @@ -3,7 +3,8 @@ LDLIBS = -lcurses CFLAGS = -Wall -O2 DFLAGS = -g -DDEBUG -Werror PROGS = tig -DOCS = tig.1.txt tig.1.html tig.1 tigrc.5.html tigrc.5 README.html +DOCS = tig.1.txt tig.1.html tig.1 tigrc.5.html tigrc.5 \ + manual.html manual.html-chunked README.html ifneq (,$(wildcard .git)) VERSION = $(shell git-describe) @@ -30,6 +31,7 @@ install-docs: docs done clean: + rm -rf manual.html-chunked rm -f $(PROGS) $(DOCS) core spell-check: @@ -65,3 +67,12 @@ README.html: README %.5 : %.5.xml xmlto man $< + +%.html : %.txt + asciidoc -b xhtml11 -d article $< + +%.xml : %.txt + asciidoc -b docbook -d article $< + +%.html-chunked : %.xml + xmlto html -o $@ $< diff --git a/manual.txt b/manual.txt new file mode 100644 index 0000000..775c8c5 --- /dev/null +++ b/manual.txt @@ -0,0 +1,386 @@ +The tig Manual +============== +Jonas Fonseca + +This is the manual for tig, the ncurses-based text-mode interface for git. +Tig allows you to browse changes in a git repository and can additionally act +as a pager for output of various git commands. When used as a pager, it will +display input from stdin and colorize it. + +When browsing repositories, tig uses the underlying git commands to present +the user with various views, such as summarized commit log and showing the +commit with the log message, diffstat, and the diff. + +Calling Conventions +------------------- + +Pager Mode +~~~~~~~~~~ + +If stdin is a pipe, any log or diff options will be ignored and the pager view +will be opened loading data from stdin. The pager mode can be used for +colorizing output from various git commands. + +Example on how to colorize the output of git-show(1): + + $ git show | tig + +Git Command Options +~~~~~~~~~~~~~~~~~~~ + +All git command options specified on the command line will be passed to the +given command and all will be shell quoted before they are passed to the +shell. + +NOTE: If you specify options for the main view, you should not use the +`--pretty` option as this option will be set automatically to the format +expected by the main view. + +Example on how to open the log view and show both author and committer +information: + + $ tig log --pretty=fuller + +See the <> section below for an introduction +to revision options supported by the git commands. For details on specific git +command options, refer to the man page of the command in question. + +Environment Variables +--------------------- + +Several options related to the interface with git can be configured via +environment options. + +Repository References +~~~~~~~~~~~~~~~~~~~~~ + +Commits that are referenced by tags and branch heads will be marked by the +reference name surrounded by '[' and ']': + + 2006-03-26 19:42 Petr Baudis | [cogito-0.17.1] Cogito 0.17.1 + +If you want to filter out certain directories under `.git/refs/`, say `tmp` +you can do it by setting the following variable: + + $ TIG_LS_REMOTE="git ls-remote . | sed /\/tmp\//d" tig + +Or set the variable permanently in your environment. + +TIG_LS_REMOTE:: + Set command for retrieving all repository references. The command + should output data in the same format as git-ls-remote(1). + +[[history-commands]] +History Commands +~~~~~~~~~~~~~~~~ + +It is possible to alter which commands are used for the different views. If +for example you prefer commits in the main view to be sorted by date and only +show 500 commits, use: + + $ TIG_MAIN_CMD="git log --date-order -n500 --pretty=raw %s" tig + +Or set the variable permanently in your environment. + +Notice, how `%s` is used to specify the commit reference. There can be a +maximum of 5 `%s` ref specifications. + +TIG_DIFF_CMD:: + The command used for the diff view. By default, git show is used + as a backend. + +TIG_LOG_CMD:: + The command used for the log view. If you prefer to have both + author and committer shown in the log view be sure to pass + `--pretty=fuller` to git log. + +TIG_MAIN_CMD:: + The command used for the main view. Note, you must always specify + the option: `--pretty=raw` since the main view parser expects to + read that format. + +The Viewer +---------- + +The display consists of a status window on the last line of the screen and one +or more views. The default is to only show one view at the time but it is +possible to split both the main and log view to also show the commit diff. + +If you are in the log view and press 'Enter' when the current line is a commit +line, such as: + + commit 4d55caff4cc89335192f3e566004b4ceef572521 + +You will split the view so that the log view is displayed in the top window +and the diff view in the bottom window. You can switch between the two views +by pressing 'Tab'. To maximize the log view again, simply press 'l'. + +Current Head and Commit ID +~~~~~~~~~~~~~~~~~~~~~~~~~~ + +The viewer keeps track of both what head and commit ID you are currently +viewing. The commit ID will follow the cursor line and change everytime time +you highlight a different commit. Whenever you reopen the diff view it will be +reloaded, if the commit ID changed. + +The head ID is used when opening the main and log view to indicate from what +revision to show history. + +Views +~~~~~ + +tig(1) presents various 'views' of a repository. Each view is based on output +from an external command, most often 'git log', 'git diff', or 'git show'. + +The main view:: + Is the default view, and it shows a one line summary of each commit + in the chosen list of revisions. The summary includes commit date, + author, and the first line of the log message. Additionally, any + repository references, such as tags, will be shown. + +The log view:: + Presents a more rich view of the revision log showing the whole log + message and the diffstat. + +The diff view:: + Shows either the diff of the current working tree, that is, what + has changed since the last commit, or the commit diff complete + with log message, diffstat and diff. + +The pager view:: + Is used for displaying both input from stdin and output from git + commands entered in the internal prompt. + +The help view:: + Displays the information from the tig(1) man page. For the help view + to work you need to have the tig(1) man page installed. + +Title Windows +~~~~~~~~~~~~~ + +Each view has a title window which shows the name of the view, current commit +ID if available, and where the view is positioned: + + [main] c622eefaa485995320bc743431bae0d497b1d875 - commit 1 of 61 (1%) + +By default, the title of the current view is highlighted using bold font. For +long loading views (taking over 3 seconds) the time since loading started will +be appended: + + [main] 77d9e40fbcea3238015aea403e06f61542df9a31 - commit 1 of 779 (0%) 5s + +Keys +---- +Below the default key bindings are shown. + +View Switching +~~~~~~~~~~~~~~ +m:: + Switch to main view. +d:: + Switch to diff view. +l:: + Switch to log view. +p:: + Switch to pager view. +h:: + Show man page. + +View Manipulation +~~~~~~~~~~~~~~~~~ +q:: + Close view, if multiple views are open it will jump back to the + previous view in the view stack. If it is the last open view it + will quit. Use 'Q' to quit all views at once. +Enter:: + This key is "context sensitive" depending on what view you are + currently in. When in log view on a commit line or in the main + view, split the view and show the commit diff. In the diff view + pressing Enter will simply scroll the view one line down. +Tab:: + Switch to next view. +Up:: + This key is "context sensitive" and will move the cursor one + line up. However, uf you opened a diff view from the main view + (split- or full-screen) it will change the cursor to point to + the previous commit in the main view and update the diff view + to display it. +Down:: + Similar to 'Up' but will move down. + +Cursor Navigation +~~~~~~~~~~~~~~~~~ +j:: + Move cursor one line up. +k:: + Move cursor one line down. +PgUp:: +b:: +-:: + Move cursor one page up. +PgDown:: +Space:: + Move cursor one page down. +Home:: + Jump to first line. +End:: + Jump to last line. + +Scrolling +~~~~~~~~~ +Insert:: + Scroll view one line up. +Delete:: + Scroll view one line down. +w:: + Scroll view one page up. +s:: + Scroll view one page down. + +Misc +~~~~ +Q:: + Quit. +r:: + Redraw screen. +z:: + Stop all background loading. This can be useful if you use + tig(1) in a repository with a long history without limiting + the revision log. +v:: + Show version. +n:: + Toggle line numbers on/off. +':':: + Open prompt. This allows you to specify what git command + to run. Example: + + :log -p + +[[refspec]] +Revision Specification +---------------------- + +This section describes various ways to specify what revisions to display or +otherwise limit the view to. tig(1) does not itself parse the described +revision options so refer to the relevant git man pages for futher +information. Relevant man pages besides git-log(1) are git-diff(1) and +git-rev-list(1). + +You can tune the interaction with git by making use of the options explained +in this section. For example, by configuring the environment variables +described in the <> section. + +Limit by Path Name +~~~~~~~~~~~~~~~~~~ + +If you are interested only in those revisions that made changes to a specific +file (or even several files) list the files like this: + + $ tig log Makefile README + +To avoid ambiguity with repository references such as tag name, be sure to +separate file names from other git options using "\--". So if you have a file +named 'master' it will clash with the reference named 'master', and thus you +will have to use: + + $ tig log -- master + +NOTE: For the main view, avoiding ambiguity will in some cases require you to +specify two "\--" options. The first will make tig(1) stop option processing +and the latter will be passed to git log. + +Limit by Date or Number +~~~~~~~~~~~~~~~~~~~~~~~ + +To speed up interaction with git, you can limit the amount of commits to show +both for the log and main view. Either limit by date using e.g. +`--since=1.month` or limit by the number of commits using `-n400`. + +If you are only interested in changed that happened between two dates you can +use: + + $ tig -- --after="May 5th" --before="2006-05-16 15:44" + +NOTE: If you want to avoid having to quote dates containing spaces you can use +"." instead, e.g. `--after=May.5th`. + +Limiting by Commit Ranges +~~~~~~~~~~~~~~~~~~~~~~~~~ + +Alternatively, commits can be limited to a specific range, such as "all +commits between 'tag-1.0' and 'tag-2.0'". For example: + + $ tig log tag-1.0..tag-2.0 + +This way of commit limiting makes it trivial to only browse the commits which +haven't been pushed to a remote branch. Assuming 'origin' is your upstream +remote branch, using: + + $ tig log origin..HEAD + +will list what will be pushed to the remote branch. Optionally, the ending +'HEAD' can be left out since it is implied. + +Limiting by Reachability +~~~~~~~~~~~~~~~~~~~~~~~~ + +Git interprets the range specifier "tag-1.0..tag-2.0" as "all commits +reachable from 'tag-2.0' but not from 'tag-1.0'". Where reachability refers +to what commits are ancestors (or part of the history) of the branch or tagged +revision in question. + +If you prefer to specify which commit to preview in this way use the +following: + + $ tig log tag-2.0 ^tag-1.0 + +You can think of '^' as a negation operator. Using this alternate syntax, it +is possible to further prune commits by specifying multiple branch cut offs. + +Combining Revisions Specification +~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~ + +Revisions options can to some degree be combined, which makes it possible to +say "show at most 20 commits from within the last month that changed files +under the Documentation/ directory." + + $ tig -- --since=1.month -n20 -- Documentation/ + +Examining All Repository References +~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~ + +In some cases, it can be useful to query changes across all references in a +repository. An example is to ask "did any line of development in this +repository change a particular file within the last week". This can be +accomplished using: + + $ tig -- --all --since=1.week -- Makefile + +include::BUGS[] + +Copyright +--------- + +Copyright (c) 2006 Jonas Fonseca + +This program is free software; you can redistribute it and/or modify +it under the terms of the GNU General Public License as published by +the Free Software Foundation; either version 2 of the License, or +(at your option) any later version. + +References and Related Tools +---------------------------- + +include::SITES[] + +Git porcelains: + + - link:http://www.kernel.org/pub/software/scm/git/docs/[git], + - link:http://www.kernel.org/pub/software/scm/cogito/docs/[Cogito] + +Other git repository browsers: + + - gitk(1) + - qgit(1) + - gitview(1) diff --git a/tig.c b/tig.c index e5f1ef1..e7deb2e 100644 --- a/tig.c +++ b/tig.c @@ -417,45 +417,12 @@ parse_options(int argc, char *argv[]) } if (!isatty(STDIN_FILENO)) { - /** - * Pager mode - * ~~~~~~~~~~ - * If stdin is a pipe, any log or diff options will be ignored and the - * pager view will be opened loading data from stdin. The pager mode - * can be used for colorizing output from various git commands. - * - * Example on how to colorize the output of git-show(1): - * - * $ git show | tig - **/ opt_request = REQ_VIEW_PAGER; opt_pipe = stdin; } else if (i < argc) { size_t buf_size; - /** - * Git command options - * ~~~~~~~~~~~~~~~~~~~ - * All git command options specified on the command line will - * be passed to the given command and all will be shell quoted - * before they are passed to the shell. - * - * NOTE: If you specify options for the main view, you should - * not use the `--pretty` option as this option will be set - * automatically to the format expected by the main view. - * - * Example on how to open the log view and show both author and - * committer information: - * - * $ tig log --pretty=fuller - * - * See the <> section below - * for an introduction to revision options supported by the git - * commands. For details on specific git command options, refer - * to the man page of the command in question. - **/ - if (opt_request == REQ_VIEW_MAIN) /* XXX: This is vulnerable to the user overriding * options required for the main view parser. */ @@ -486,23 +453,6 @@ parse_options(int argc, char *argv[]) /** * ENVIRONMENT VARIABLES * --------------------- - * Several options related to the interface with git can be configured - * via environment options. - * - * Repository references - * ~~~~~~~~~~~~~~~~~~~~~ - * Commits that are referenced by tags and branch heads will be marked - * by the reference name surrounded by '[' and ']': - * - * 2006-03-26 19:42 Petr Baudis | [cogito-0.17.1] Cogito 0.17.1 - * - * If you want to filter out certain directories under `.git/refs/`, say - * `tmp` you can do it by setting the following variable: - * - * $ TIG_LS_REMOTE="git ls-remote . | sed /\/tmp\//d" tig - * - * Or set the variable permanently in your environment. - * * TIG_LS_REMOTE:: * Set command for retrieving all repository references. The command * should output data in the same format as git-ls-remote(1). @@ -512,20 +462,6 @@ parse_options(int argc, char *argv[]) "git ls-remote . 2>/dev/null" /** - * [[history-commands]] - * History commands - * ~~~~~~~~~~~~~~~~ - * It is possible to alter which commands are used for the different views. - * If for example you prefer commits in the main view to be sorted by date - * and only show 500 commits, use: - * - * $ TIG_MAIN_CMD="git log --date-order -n500 --pretty=raw %s" tig - * - * Or set the variable permanently in your environment. - * - * Notice, how `%s` is used to specify the commit reference. There can - * be a maximum of 5 `%s` ref specifications. - * * TIG_DIFF_CMD:: * The command used for the diff view. By default, git show is used * as a backend. @@ -848,23 +784,9 @@ load_options(void) } -/** +/* * The viewer - * ---------- - * The display consists of a status window on the last line of the screen and - * one or more views. The default is to only show one view at the time but it - * is possible to split both the main and log view to also show the commit - * diff. - * - * If you are in the log view and press 'Enter' when the current line is a - * commit line, such as: - * - * commit 4d55caff4cc89335192f3e566004b4ceef572521 - * - * You will split the view so that the log view is displayed in the top window - * and the diff view in the bottom window. You can switch between the two - * views by pressing 'Tab'. To maximize the log view again, simply press 'l'. - **/ + */ struct view; struct view_ops; @@ -878,18 +800,7 @@ static unsigned int current_view; #define displayed_views() (display[1] != NULL ? 2 : 1) -/** - * Current head and commit ID - * ~~~~~~~~~~~~~~~~~~~~~~~~~~ - * The viewer keeps track of both what head and commit ID you are currently - * viewing. The commit ID will follow the cursor line and change everytime time - * you highlight a different commit. Whenever you reopen the diff view it - * will be reloaded, if the commit ID changed. - * - * The head ID is used when opening the main and log view to indicate from - * what revision to show history. - **/ - +/* Current head and commit ID */ static char ref_commit[SIZEOF_REF] = "HEAD"; static char ref_head[SIZEOF_REF] = "HEAD"; @@ -947,35 +858,6 @@ static struct view_ops main_ops; #define VIEW_(id, name, ops, ref) \ VIEW_STR(name, TIG_##id##_CMD, TIG_##id##_CMD, ref, ops) -/** - * Views - * ~~~~~ - * tig(1) presents various 'views' of a repository. Each view is based on output - * from an external command, most often 'git log', 'git diff', or 'git show'. - * - * The main view:: - * Is the default view, and it shows a one line summary of each commit - * in the chosen list of revisions. The summary includes commit date, - * author, and the first line of the log message. Additionally, any - * repository references, such as tags, will be shown. - * - * The log view:: - * Presents a more rich view of the revision log showing the whole log - * message and the diffstat. - * - * The diff view:: - * Shows either the diff of the current working tree, that is, what - * has changed since the last commit, or the commit diff complete - * with log message, diffstat and diff. - * - * The pager view:: - * Is used for displaying both input from stdin and output from git - * commands entered in the internal prompt. - * - * The help view:: - * Displays the information from the tig(1) man page. For the help view - * to work you need to have the tig(1) man page installed. - **/ static struct view views[] = { VIEW_(MAIN, "main", &main_ops, ref_head), @@ -1019,21 +901,6 @@ redraw_view(struct view *view) } -/** - * Title windows - * ~~~~~~~~~~~~~ - * Each view has a title window which shows the name of the view, current - * commit ID if available, and where the view is positioned: - * - * [main] c622eefaa485995320bc743431bae0d497b1d875 - commit 1 of 61 (1%) - * - * By default, the title of the current view is highlighted using bold font. - * For long loading views (taking over 3 seconds) the time since loading - * started will be appended: - * - * [main] 77d9e40fbcea3238015aea403e06f61542df9a31 - commit 1 of 779 (0%) 5s - **/ - static void update_view_title(struct view *view) { @@ -2085,11 +1952,9 @@ static struct view_ops main_ops = { }; -/** - * KEYS - * ---- - * Below the default key bindings are shown. - **/ +/* + * Keys + */ struct keymap { int alias; @@ -2097,74 +1962,21 @@ struct keymap { }; static struct keymap keymap[] = { - /** - * View switching - * ~~~~~~~~~~~~~~ - * m:: - * Switch to main view. - * d:: - * Switch to diff view. - * l:: - * Switch to log view. - * p:: - * Switch to pager view. - * h:: - * Show man page. - **/ + /* View switching */ { 'm', REQ_VIEW_MAIN }, { 'd', REQ_VIEW_DIFF }, { 'l', REQ_VIEW_LOG }, { 'p', REQ_VIEW_PAGER }, { 'h', REQ_VIEW_HELP }, - /** - * View manipulation - * ~~~~~~~~~~~~~~~~~ - * q:: - * Close view, if multiple views are open it will jump back to the - * previous view in the view stack. If it is the last open view it - * will quit. Use 'Q' to quit all views at once. - * Enter:: - * This key is "context sensitive" depending on what view you are - * currently in. When in log view on a commit line or in the main - * view, split the view and show the commit diff. In the diff view - * pressing Enter will simply scroll the view one line down. - * Tab:: - * Switch to next view. - * Up:: - * This key is "context sensitive" and will move the cursor one - * line up. However, uf you opened a diff view from the main view - * (split- or full-screen) it will change the cursor to point to - * the previous commit in the main view and update the diff view - * to display it. - * Down:: - * Similar to 'Up' but will move down. - **/ + /* View manipulation */ { 'q', REQ_VIEW_CLOSE }, { KEY_TAB, REQ_VIEW_NEXT }, { KEY_RETURN, REQ_ENTER }, { KEY_UP, REQ_PREVIOUS }, { KEY_DOWN, REQ_NEXT }, - /** - * Cursor navigation - * ~~~~~~~~~~~~~~~~~ - * j:: - * Move cursor one line up. - * k:: - * Move cursor one line down. - * PgUp:: - * b:: - * -:: - * Move cursor one page up. - * PgDown:: - * Space:: - * Move cursor one page down. - * Home:: - * Jump to first line. - * End:: - * Jump to last line. - **/ + /* Cursor navigation */ { 'k', REQ_MOVE_UP }, { 'j', REQ_MOVE_DOWN }, { KEY_HOME, REQ_MOVE_FIRST_LINE }, @@ -2175,44 +1987,13 @@ static struct keymap keymap[] = { { 'b', REQ_MOVE_PAGE_UP }, { '-', REQ_MOVE_PAGE_UP }, - /** - * Scrolling - * ~~~~~~~~~ - * Insert:: - * Scroll view one line up. - * Delete:: - * Scroll view one line down. - * w:: - * Scroll view one page up. - * s:: - * Scroll view one page down. - **/ + /* Scrolling */ { KEY_IC, REQ_SCROLL_LINE_UP }, { KEY_DC, REQ_SCROLL_LINE_DOWN }, { 'w', REQ_SCROLL_PAGE_UP }, { 's', REQ_SCROLL_PAGE_DOWN }, - /** - * Misc - * ~~~~ - * Q:: - * Quit. - * r:: - * Redraw screen. - * z:: - * Stop all background loading. This can be useful if you use - * tig(1) in a repository with a long history without limiting - * the revision log. - * v:: - * Show version. - * n:: - * Toggle line numbers on/off. - * ':':: - * Open prompt. This allows you to specify what git command - * to run. Example: - * - * :log -p - **/ + /* Misc */ { 'Q', REQ_QUIT }, { 'z', REQ_STOP_LOADING }, { 'v', REQ_SHOW_VERSION }, @@ -2785,105 +2566,8 @@ main(int argc, char *argv[]) } /** - * [[refspec]] - * Revision specification - * ---------------------- - * This section describes various ways to specify what revisions to display - * or otherwise limit the view to. tig(1) does not itself parse the described - * revision options so refer to the relevant git man pages for futher - * information. Relevant man pages besides git-log(1) are git-diff(1) and - * git-rev-list(1). - * - * You can tune the interaction with git by making use of the options - * explained in this section. For example, by configuring the environment - * variables described in the <> - * section. - * - * Limit by path name - * ~~~~~~~~~~~~~~~~~~ - * If you are interested only in those revisions that made changes to a - * specific file (or even several files) list the files like this: - * - * $ tig log Makefile README - * - * To avoid ambiguity with repository references such as tag name, be sure - * to separate file names from other git options using "\--". So if you - * have a file named 'master' it will clash with the reference named - * 'master', and thus you will have to use: - * - * $ tig log -- master - * - * NOTE: For the main view, avoiding ambiguity will in some cases require - * you to specify two "\--" options. The first will make tig(1) stop - * option processing and the latter will be passed to git log. - * - * Limit by date or number - * ~~~~~~~~~~~~~~~~~~~~~~~ - * To speed up interaction with git, you can limit the amount of commits - * to show both for the log and main view. Either limit by date using - * e.g. `--since=1.month` or limit by the number of commits using `-n400`. - * - * If you are only interested in changed that happened between two dates - * you can use: - * - * $ tig -- --after="May 5th" --before="2006-05-16 15:44" - * - * NOTE: If you want to avoid having to quote dates containing spaces you - * can use "." instead, e.g. `--after=May.5th`. - * - * Limiting by commit ranges - * ~~~~~~~~~~~~~~~~~~~~~~~~~ - * Alternatively, commits can be limited to a specific range, such as - * "all commits between 'tag-1.0' and 'tag-2.0'". For example: - * - * $ tig log tag-1.0..tag-2.0 - * - * This way of commit limiting makes it trivial to only browse the commits - * which haven't been pushed to a remote branch. Assuming 'origin' is your - * upstream remote branch, using: - * - * $ tig log origin..HEAD - * - * will list what will be pushed to the remote branch. Optionally, the ending - * 'HEAD' can be left out since it is implied. - * - * Limiting by reachability - * ~~~~~~~~~~~~~~~~~~~~~~~~ - * Git interprets the range specifier "tag-1.0..tag-2.0" as - * "all commits reachable from 'tag-2.0' but not from 'tag-1.0'". - * Where reachability refers to what commits are ancestors (or part of the - * history) of the branch or tagged revision in question. - * - * If you prefer to specify which commit to preview in this way use the - * following: - * - * $ tig log tag-2.0 ^tag-1.0 - * - * You can think of '^' as a negation operator. Using this alternate syntax, - * it is possible to further prune commits by specifying multiple branch - * cut offs. - * - * Combining revisions specification - * ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~ - * Revisions options can to some degree be combined, which makes it possible - * to say "show at most 20 commits from within the last month that changed - * files under the Documentation/ directory." - * - * $ tig -- --since=1.month -n20 -- Documentation/ - * - * Examining all repository references - * ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~ - * In some cases, it can be useful to query changes across all references - * in a repository. An example is to ask "did any line of development in - * this repository change a particular file within the last week". This - * can be accomplished using: - * - * $ tig -- --all --since=1.week -- Makefile - * * include::BUGS[] * - * include::SITES[] - * * COPYRIGHT * --------- * Copyright (c) 2006 Jonas Fonseca @@ -2903,4 +2587,8 @@ main(int argc, char *argv[]) * - gitk(1) * - qgit(1) * - gitview(1) + * + * Sites: + * + * include::SITES[] **/ -- 2.11.0