Commit | Line | Data |
---|---|---|
1ffa9044 | 1 | % \begin{meta-comment} <general public licence> |
2 | %% | |
e8c85bbe | 3 | %% strayman -- a LaTeX document class for Straylight manuals |
4 | %% Copyright (c) 1996 Straylight | |
1ffa9044 | 5 | %% |
6 | %% This program is free software; you can redistribute it and/or modify | |
7 | %% it under the terms of the GNU General Public License as published by | |
8 | %% the Free Software Foundation; either version 2 of the License, or | |
9 | %% (at your option) any later version. | |
10 | %% | |
11 | %% This program is distributed in the hope that it will be useful, | |
12 | %% but WITHOUT ANY WARRANTY; without even the implied warranty of | |
13 | %% MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the | |
14 | %% GNU General Public License for more details. | |
15 | %% | |
16 | %% You should have received a copy of the GNU General Public License | |
17 | %% along with this program; if not, write to the Free Software | |
18 | %% Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA. | |
19 | %% | |
20 | % \end{meta-comment} | |
21 | % | |
22 | % \begin{meta-comment} <Package preamble> | |
23 | %<+strayman>\NeedsTeXFormat{LaTeX2e} | |
24 | %<+strayman>\ProvidesClass{strayman} | |
c3f26ad3 | 25 | %<+strayman> [2003/09/04 1.10 Straylight document class] |
1ffa9044 | 26 | % \end{meta-comment} |
27 | % | |
40e73a54 | 28 | % \CheckSum{3173} |
1ffa9044 | 29 | %% \CharacterTable |
30 | %% {Upper-case \A\B\C\D\E\F\G\H\I\J\K\L\M\N\O\P\Q\R\S\T\U\V\W\X\Y\Z | |
31 | %% Lower-case \a\b\c\d\e\f\g\h\i\j\k\l\m\n\o\p\q\r\s\t\u\v\w\x\y\z | |
32 | %% Digits \0\1\2\3\4\5\6\7\8\9 | |
33 | %% Exclamation \! Double quote \" Hash (number) \# | |
34 | %% Dollar \$ Percent \% Ampersand \& | |
35 | %% Acute accent \' Left paren \( Right paren \) | |
36 | %% Asterisk \* Plus \+ Comma \, | |
37 | %% Minus \- Point \. Solidus \/ | |
38 | %% Colon \: Semicolon \; Less than \< | |
39 | %% Equals \= Greater than \> Question mark \? | |
40 | %% Commercial at \@ Left bracket \[ Backslash \\ | |
41 | %% Right bracket \] Circumflex \^ Underscore \_ | |
42 | %% Grave accent \` Left brace \{ Vertical bar \| | |
43 | %% Right brace \} Tilde \~} | |
44 | %% | |
45 | % | |
46 | % \begin{meta-comment} <driver> | |
47 | % | |
48 | %<*driver> | |
29384960 | 49 | \documentclass[10pt,a4paper,book,nohyperref]{strayman} |
1ffa9044 | 50 | \input{mdwtools} |
51 | \usepackage{mdwlist} | |
52 | \describesclass{strayman} | |
0ef5b158 | 53 | \errorcontextlines\maxdimen |
1ffa9044 | 54 | \title[The \strayman\ document class] |
55 | {The \strayman\footnote{The \strayman\ document class is currently % | |
56 | at version \mdwfileinfo{strayman.cls}{version}, dated % | |
57 | \mdwfileinfo{strayman.cls}{date}.} {} document class} | |
58 | \newenvironment{syndisplay}{\display\synshorts}{\enddisplay} | |
59 | \DeclareRobustCommand\strayman{\package{strayman}} | |
60 | \mdwdoc | |
61 | %</driver> | |
62 | % | |
63 | % \end{meta-comment} | |
64 | % | |
65 | % \chapter{About the \strayman\ document class} | |
66 | % | |
67 | % The standard \LaTeX\ document classes are all very well for simple | |
68 | % documents, but the style isn't appropriate for works like manuals. | |
8a0490fb | 69 | % The \strayman\ document class is an attempt to rectify this situation, |
1ffa9044 | 70 | % providing an attractive and distinctive style for Straylight documents. |
71 | % The layout is based on an earlier style built for \emph{Impression} | |
72 | % documents, although many improvements have been made. This document | |
73 | % was typeset using \strayman, and it demonstrates the design far better | |
74 | % than I can describe it. | |
75 | % | |
76 | % | |
77 | % \section{Document class options} | |
78 | % | |
79 | % The document class provides many options, most of which are taken from | |
80 | % the standard \LaTeX\ classes. | |
81 | % | |
82 | % \begin{description} | |
83 | % \def\|{\ensuremath\vert} | |
84 | % | |
85 | % \item [\texttt{a4paper} \| \texttt{a5paper} \| \texttt{b5paper} \| | |
86 | % \texttt{letterpaper} \| \texttt{legalpaper} \| | |
87 | % \texttt{executivepaper}] Select the output paper size. Since | |
88 | % \strayman\ is intended to be used mainly for manuals, the default | |
89 | % size is |a5paper|. | |
90 | % | |
91 | % \item [\texttt{landscape}] Swaps the width and height of the paper. | |
92 | % Probably not much use, to be honest. | |
93 | % | |
94 | % \item [\texttt{9pt} \| \texttt{10pt} \| \texttt{11pt} \| \texttt{12pt}] | |
95 | % Selects the basic type size for the document. The |9pt| option is | |
96 | % nonstandard, but it is the default, since larger sizes don't work | |
97 | % well on A5~paper. | |
98 | % | |
99 | % \item [\texttt{text}] Sets up the page layout and fonts so that the | |
100 | % output can be converted fairly easily into a raw text file. | |
101 | % | |
102 | % \item [\texttt{oneside} \| \texttt{twoside}] Selects one- or two-sided | |
103 | % page layouts. Note that one-sided output doesn't look too good. | |
104 | % | |
105 | % \item [\texttt{draft} \| \texttt{final}] Select various options for draft | |
106 | % or final copy. | |
107 | % | |
108 | % \item [\texttt{titlepage} \| \texttt{notitlepage}] Selects whether | |
109 | % the |\maketitle| displays its output on a separate title page. | |
110 | % | |
111 | % \item [\texttt{openright} \| \texttt{openany}] Select whether chapters | |
112 | % start only on quarto pages, or any page. The default is |openright|. | |
113 | % | |
114 | % \item [\texttt{onecolumn} \| \texttt{twocolumn}] Choose whether the | |
115 | % main body text is set in one or two columns. Note that this uses | |
116 | % \LaTeX's built-in column handling, not the \package{multicol} | |
117 | % package. | |
118 | % | |
119 | % \item [\texttt{leqno}] Put the equation numbers on the left, not the | |
120 | % right. | |
121 | % | |
122 | % \item [\texttt{fleqn}] Typeset displayed equations left aligned. | |
123 | % | |
124 | % \item [\texttt{openbib}] Use the `open' style for the bibliography. | |
125 | % | |
126 | % \item [\texttt{article}] Change the formatting slightly, in a way more | |
127 | % suited to short documents. | |
128 | % | |
129 | % \item [\texttt{square} \| \texttt{rounded}] These options are passed | |
130 | % directly to the \package{syntax} package, when it's loaded. | |
131 | % | |
1ffa9044 | 132 | % \end{description} |
133 | % | |
134 | % | |
135 | % \section{The \texttt{text} option} | |
136 | % | |
137 | % In order to facilitate creation of attractively formatted text files | |
138 | % from \LaTeX\ documents, \strayman\ provides a |text| option. This will | |
139 | % set up \emph{all} the fonts to be monospaced, in the same size. The page | |
140 | % size is set up to be a multiple of the character size. The command | |
141 | % \begin{syndisplay} | |
142 | % "dvi2tty -e-17" <filename> | |
143 | % \end{syndisplay} | |
144 | % appears to produce a reasonable output from a DVI file created in this | |
145 | % way. The output will need to be formatted and corrected slightly by hand | |
146 | % although there's a good deal less work to do than might be required | |
147 | % otherwise. | |
148 | % | |
149 | % | |
150 | % \section{That's it} | |
151 | % | |
152 | % That's all I'm writing for now. It's a document class. It defines the | |
153 | % style. What more do you expect? | |
154 | % | |
155 | % | |
156 | % \implementation | |
157 | % | |
158 | % \chapter{Implementation} | |
159 | % | |
160 | % \section{Options handling} | |
161 | % | |
162 | % From here on, a lot of the code is shamelessly borrowed from | |
163 | % \file{book.cls} and other places. This is what code re-use is for. | |
164 | % | |
165 | % This bit handles all the options on the |\documentclass| command, either | |
166 | % altering our own internal arguments, or loading other packages as | |
167 | % appropriate. | |
168 | % | |
169 | % \subsection{Set up some defaults} | |
170 | % | |
171 | % We create some variables to hold the settings, and initialise them to | |
172 | % sensible values. | |
173 | % | |
174 | % \begin{macrocode} | |
175 | %<*strayman> | |
176 | \newcommand\@ptsize{} | |
177 | \newif\if@restonecol\@restonecolfalse | |
b8d14be9 | 178 | \newif\if@titlepage\@titlepagefalse |
1ffa9044 | 179 | \newif\if@openright\@openrighttrue |
180 | \newif\if@openbib\@openbibfalse | |
181 | \newif\if@appendix\@appendixfalse | |
b8d14be9 | 182 | \newif\if@article\@articletrue |
1ffa9044 | 183 | \newif\if@offsetpages\@offsetpagestrue |
b8d14be9 MW |
184 | \newif\if@numbering\@numberingtrue |
185 | \newif\if@herefloats\@herefloatsfalse | |
186 | \newif\if@runinsubsubsec\@runinsubsubsectrue | |
29384960 | 187 | \newif\if@hyperref\@hyperreftrue |
0ef5b158 | 188 | \newif\if@indentpar |
1ffa9044 | 189 | \newdimen\pagesurround |
190 | \let\headfam\rmfamily | |
191 | \let\pad@margin\@empty | |
192 | \def\@delayed{} | |
193 | \def\@delaycode#1{% | |
194 | \expandafter\def\expandafter\@delayed\expandafter{\@delayed#1}% | |
195 | } | |
196 | % \end{macrocode} | |
197 | % | |
198 | % \subsection{Declare the options we support} | |
199 | % | |
200 | % This is just a tedious list of all the options. | |
201 | % | |
202 | % \begin{macrocode} | |
203 | \DeclareOption{a4paper}{% | |
204 | \paperheight297mm% | |
205 | \paperwidth210mm% | |
206 | \pagesurround1in% | |
207 | } | |
208 | \DeclareOption{a5paper}{% | |
209 | \paperheight210mm% | |
210 | \paperwidth148mm% | |
211 | \pagesurround12mm% | |
212 | } | |
213 | \DeclareOption{b5paper}{% | |
214 | \paperheight250mm% | |
215 | \paperwidth176mm% | |
216 | \pagesurround1in% | |
217 | } | |
218 | \DeclareOption{letterpaper}{% | |
219 | \paperheight11in% | |
220 | \paperwidth8.5in% | |
221 | \pagesurround1in% | |
222 | } | |
223 | \DeclareOption{legalpaper}{% | |
224 | \paperheight14in% | |
225 | \paperwidth8.5in% | |
226 | \pagesurround1in% | |
227 | } | |
228 | \DeclareOption{executivepaper}{% | |
229 | \paperheight10.5in% | |
230 | \paperwidth7.25in% | |
231 | \pagesurround1in% | |
232 | } | |
233 | \DeclareOption{landscape}{% | |
234 | \@tempdima\paperheight% | |
235 | \paperheight\paperwidth% | |
236 | \paperwidth\@tempdima% | |
237 | } | |
238 | \DeclareOption{8pt}{\renewcommand\@ptsize{8pt}} | |
239 | \DeclareOption{9pt}{\renewcommand\@ptsize{9pt}} | |
240 | \DeclareOption{10pt}{\renewcommand\@ptsize{10pt}} | |
241 | \DeclareOption{11pt}{\renewcommand\@ptsize{11pt}} | |
242 | \DeclareOption{12pt}{\renewcommand\@ptsize{12pt}} | |
243 | \DeclareOption{text}{% | |
244 | \renewcommand\@ptsize{text}% | |
245 | \setbox\z@\hbox{\texttt{M\strut}}% | |
246 | \newdimen\tt@chw\tt@chw\wd\z@% | |
247 | \newdimen\tt@chh\tt@chh\ht\z@\advance\tt@chh\dp\z@% | |
248 | \paperwidth77\tt@chw% | |
249 | \paperheight60\tt@chh% | |
250 | \raggedright% | |
251 | \def\pad@margin{.} | |
252 | } | |
253 | \DeclareOption{oneside}{\@twosidefalse \@mparswitchfalse} | |
254 | \DeclareOption{twoside}{\@twosidetrue \@mparswitchfalse \reversemarginpar} | |
255 | \DeclareOption{draft}{\overfullrule5\p@} | |
256 | \DeclareOption{final}{\overfullrule\z@} | |
257 | \DeclareOption{titlepage}{\@titlepagetrue} | |
258 | \DeclareOption{notitlepage}{\@titlepagefalse} | |
259 | \DeclareOption{openright}{\@openrighttrue} | |
260 | \DeclareOption{openany}{\@openrightfalse} | |
261 | \DeclareOption{onecolumn}{\@twocolumnfalse} | |
262 | \DeclareOption{twocolumn}{\@twocolumntrue} | |
263 | \DeclareOption{offsetpages}{\@offsetpagestrue} | |
264 | \DeclareOption{nooffsetpages}{\@offsetpagesfalse} | |
265 | \DeclareOption{herefloats}{\@herefloatstrue} | |
266 | \DeclareOption{noherefloats}{\@herefloatsfalse} | |
267 | \DeclareOption{leqno}{\input{leqno.clo}} | |
268 | \DeclareOption{fleqn}{\input{fleqn.clo}} | |
269 | \DeclareOption{openbib}{\@openbibtrue} | |
270 | \DeclareOption{article}{\@articletrue} | |
b8d14be9 | 271 | \DeclareOption{noarticle}{\@articlefalse} |
1ffa9044 | 272 | \DeclareOption{numbering}{\@numberingtrue} |
273 | \DeclareOption{nonumbering}{\@numberingfalse} | |
274 | \DeclareOption{runinsubsubsec}{\@runinsubsubsectrue} | |
275 | \DeclareOption{noruninsubsubsec}{\@runinsubsubsecfalse} | |
0ef5b158 MW |
276 | \DeclareOption{indentpar}{\@indentpartrue} |
277 | \DeclareOption{noindentpar}{\@indentparfalse} | |
b8d14be9 | 278 | \DeclareOption{book}{\@titlepagetrue\@articlefalse} |
29384960 MW |
279 | \DeclareOption{hyperref}{\@hyperreftrue} |
280 | \DeclareOption{nohyperref}{\@hyperreffalse} | |
1ffa9044 | 281 | % \end{macrocode} |
282 | % | |
283 | % \subsection{Set up the options} | |
284 | % | |
285 | % We set up some default options, and then read the user's. | |
286 | % | |
287 | % \begin{macrocode} | |
b8d14be9 | 288 | \ExecuteOptions{a4paper,10pt,twoside,onecolumn,final} |
1ffa9044 | 289 | \ProcessOptions |
290 | % \end{macrocode} | |
291 | % | |
292 | % If this is PDF\TeX\ then tell it the page bounds. | |
293 | % | |
294 | % \begin{macrocode} | |
b8d14be9 MW |
295 | \newif\ifpdfing\pdfingfalse |
296 | \if1\ifx\pdfoutput\@@undefined@@0\else\the\pdfoutput\fi | |
297 | \pdfingtrue | |
298 | \fi | |
299 | \ifpdfing | |
1ffa9044 | 300 | \pdfpageheight\paperheight |
301 | \pdfpagewidth\paperwidth | |
29384960 MW |
302 | \fi |
303 | \if@hyperref | |
b8d14be9 MW |
304 | \AtEndOfClass{% |
305 | \RequirePackage[% | |
29384960 | 306 | bookmarks = true, bookmarksnumbered = true, bookmarksdepth = 3, |
a6bb7088 | 307 | colorlinks = true, linkcolor = blue, citecolor = blue, urlcolor = blue, |
29384960 | 308 | breaklinks = true]{hyperref} |
b8d14be9 | 309 | } |
29384960 MW |
310 | \ifpdfing |
311 | \PassOptionsToPackage{pdftex}{hyperref} | |
312 | \else | |
313 | \PassOptionsToPackage{dvips}{hyperref} | |
314 | \fi | |
b8d14be9 | 315 | \fi |
1ffa9044 | 316 | % \end{macrocode} |
317 | % | |
318 | % \subsection{Read in the text size option} | |
319 | % | |
320 | % The text sizing is rather messy. We store this in a separate file. To | |
321 | % keep this stuff away from other classes, we use the file \emph{extension} | |
322 | % as the size specifier, rather than the filename, which is the normal | |
323 | % \LaTeX\ way of doing this. This is a \riscos\ thing mainly: I don't like | |
324 | % loads of directories cluttering up my disk, and it means that I can move | |
325 | % the whole of the \strayman\ stuff around as one directory. | |
326 | % | |
327 | % \begin{macrocode} | |
328 | \input{strayman.\@ptsize} | |
329 | %</strayman> | |
330 | % \end{macrocode} | |
331 | % | |
332 | % \section{Package loading} | |
333 | % | |
334 | % \begin{macrocode} | |
335 | %<*strayman> | |
336 | \RequirePackage{fancyhdr} | |
337 | \RequirePackage{multicol} | |
338 | \@delayed | |
339 | %</strayman> | |
340 | % \end{macrocode} | |
341 | % | |
342 | % \section{Page layout} | |
343 | % | |
344 | % This is largely the domain of the size option files. | |
345 | % | |
346 | % \begin{macrocode} | |
347 | %<*8pt|9pt|10pt|11pt|12pt|text> | |
348 | %<+8pt>\ProvidesFile{strayman.8pt} | |
349 | %<+9pt>\ProvidesFile{strayman.9pt} | |
350 | %<+10pt>\ProvidesFile{strayman.10pt} | |
351 | %<+11pt>\ProvidesFile{strayman.11pt} | |
352 | %<+12pt>\ProvidesFile{strayman.12pt} | |
353 | %<+text>\ProvidesFile{strayman.text} | |
354 | % \end{macrocode} | |
355 | % | |
356 | % \subsection{Font sizes} | |
357 | % | |
358 | % These are fairly standard, and mainly copied from the original size | |
359 | % options. | |
360 | % | |
361 | % \begin{macro}{\@setparskip} | |
362 | % | |
363 | % Because we separate paragraphs by vertical space, we need to vary this | |
364 | % gap when we change font size. This macro does the job. | |
365 | % | |
366 | % \begin{macrocode} | |
0ef5b158 MW |
367 | \newskip\@parskip |
368 | \newdimen\@parshortfall | |
1ffa9044 | 369 | \def\@setparskip{% |
0ef5b158 MW |
370 | \@parskip.67\baselineskip\@plus\p@\relax% |
371 | \ifdim\parskip=\z@\else\parskip\@parskip\relax\fi% | |
372 | \@parshortfall\@parskip\advance\@parshortfall-\parskip% | |
1ffa9044 | 373 | } |
0ef5b158 | 374 | \def\set@vsep#1{#1\@parshortfall\advance#1} |
1ffa9044 | 375 | % \end{macrocode} |
376 | % \end{macro} | |
377 | % | |
378 | % \begin{macro}{\normalsize} | |
379 | % | |
380 | % Defines the standard size of text in the document. | |
381 | % | |
382 | % \begin{macrocode} | |
383 | \renewcommand\normalsize{% | |
384 | %<*8pt> | |
186f3b71 | 385 | \@setfontsize\normalsize\@viiipt{9.6\p@}% |
1ffa9044 | 386 | \abovedisplayskip8\p@\@plus2\p@\@minus4\p@% |
0ef5b158 MW |
387 | \set@vsep\abovedisplayshortskip\z@\@plus3\p@% |
388 | \set@vsep\belowdisplayshortskip6\p@\@plus3\p@\@minus3\p@% | |
1ffa9044 | 389 | %</8pt> |
390 | %<*9pt> | |
391 | \@setfontsize\normalsize\@ixpt\@xipt% | |
392 | \abovedisplayskip9\p@\@plus2\p@\@minus5\p@% | |
0ef5b158 MW |
393 | \set@vsep\abovedisplayshortskip\z@\@plus3\p@% |
394 | \set@vsep\belowdisplayshortskip6\p@\@plus3\p@\@minus3\p@% | |
1ffa9044 | 395 | %</9pt> |
396 | %<*10pt> | |
397 | \@setfontsize\normalsize\@xpt\@xiipt% | |
398 | \abovedisplayskip10\p@\@plus2\p@\@minus5\p@% | |
0ef5b158 MW |
399 | \set@vsep\abovedisplayshortskip\z@\@plus3\p@% |
400 | \set@vsep\belowdisplayshortskip6\p@\@plus3\p@\@minus3\p@% | |
1ffa9044 | 401 | %</10pt> |
402 | %<*11pt> | |
403 | \@setfontsize\normalsize\@xipt{13.6}% | |
404 | \abovedisplayskip11\p@\@plus3\p@\@minus6\p@% | |
0ef5b158 MW |
405 | \set@vsep\abovedisplayshortskip\z@\@plus3\p@% |
406 | \set@vsep\belowdisplayshortskip6.5\p@ \@plus3.5\p@\@minus3\p@% | |
1ffa9044 | 407 | %</11pt> |
408 | %<*12pt> | |
409 | \@setfontsize\normalsize\@xiipt{14.5}% | |
410 | \abovedisplayskip12\p@\@plus3\p@\@minus7\p@% | |
0ef5b158 MW |
411 | \set@vsep\abovedisplayshortskip\z@\@plus3\p@% |
412 | \set@vsep\belowdisplayshortskip6.5\p@ \@plus3.5\p@\@minus3\p@% | |
1ffa9044 | 413 | %</12pt> |
414 | %<*text> | |
415 | \@setfontsize\normalsize\@xpt\@xiipt% | |
416 | \abovedisplayskip10\p@\@plus2\p@\@minus5\p@% | |
0ef5b158 MW |
417 | \set@vsep\abovedisplayshortskip\z@\@plus3\p@% |
418 | \set@vsep\belowdisplayshortskip6\p@\@plus3\p@\@minus3\p@% | |
1ffa9044 | 419 | %</text> |
420 | \belowdisplayskip\abovedisplayskip% | |
421 | \let\@listi\@listI% | |
422 | \@setparskip% | |
423 | } | |
424 | \normalsize | |
0ef5b158 MW |
425 | \if@indentpar |
426 | \parskip0pt\@plus\p@ | |
427 | \else | |
428 | \parskip2ex\@plus\p@ | |
429 | \fi | |
1ffa9044 | 430 | % \end{macrocode} |
431 | % \end{macro} | |
432 | % | |
433 | % \begin{macro}{\small} | |
434 | % | |
435 | % The |\small| size is defined with similar care to |\normalsize|. The | |
436 | % list defaults are altered to cope with our different value for |\parskip|. | |
437 | % We can then separate this out independently from the typesize. | |
438 | % | |
439 | % \begin{macrocode} | |
440 | %<+text>\let\small\normalsize | |
441 | %<*8pt|9pt|10pt|11pt|12pt> | |
442 | \newcommand\small{% | |
443 | %<*8pt> | |
444 | \@setfontsize\small\@viipt{8.4}% | |
445 | \abovedisplayskip8\p@\@plus2\p@\@minus4\p@% | |
0ef5b158 MW |
446 | \set@vsep\abovedisplayshortskip\z@\@plus2\p@% |
447 | \set@vsep\belowdisplayshortskip4\p@\@plus2\p@\@minus2\p@% | |
1ffa9044 | 448 | %</8pt> |
449 | %<*9pt> | |
450 | \@setfontsize\small\@viiipt{9.5}% | |
451 | \abovedisplayskip8\p@\@plus2\p@\@minus4\p@% | |
0ef5b158 MW |
452 | \set@vsep\abovedisplayshortskip\z@\@plus2\p@% |
453 | \set@vsep\belowdisplayshortskip4\p@\@plus2\p@\@minus2\p@% | |
1ffa9044 | 454 | %</9pt> |
455 | %<*10pt> | |
456 | \@setfontsize\small\@ixpt{11}% | |
457 | \abovedisplayskip8.5\p@\@plus3\p@\@minus4\p@% | |
0ef5b158 MW |
458 | \set@vsep\abovedisplayshortskip\z@\@plus2\p@% |
459 | \set@vsep\belowdisplayshortskip4\p@\@plus2\p@\@minus2\p@% | |
1ffa9044 | 460 | %</10pt> |
461 | %<*11pt> | |
462 | \@setfontsize\small\@xpt\@xiipt% | |
463 | \abovedisplayskip10\p@\@plus2\p@\@minus5\p@% | |
0ef5b158 MW |
464 | \set@vsep\abovedisplayshortskip\z@\@plus3\p@% |
465 | \set@vsep\belowdisplayshortskip6\p@\@plus3\p@\@minus3\p@% | |
1ffa9044 | 466 | %</11pt> |
467 | %<*12pt> | |
468 | \@setfontsize\small\@xipt{13.6}% | |
469 | \abovedisplayskip11\p@\@plus3\p@\@minus6\p@% | |
0ef5b158 MW |
470 | \set@vsep\abovedisplayshortskip\z@ \@plus3\p@% |
471 | \set@vsep\belowdisplayshortskip6.5\p@ \@plus3.5\p@\@minus3\p@% | |
1ffa9044 | 472 | %</12pt> |
473 | \def\@listi{% | |
474 | \leftmargin\leftmargini% | |
0ef5b158 MW |
475 | \topsep\@parshortfall% |
476 | \parsep\@parskip% | |
1ffa9044 | 477 | \itemsep\z@% |
478 | }% | |
479 | \belowdisplayskip\abovedisplayskip% | |
480 | \@setparskip% | |
481 | } | |
482 | %</8pt|9pt|10pt|11pt|12pt> | |
483 | % \end{macrocode} | |
484 | % \end{macro} | |
485 | % | |
486 | % \begin{macro}{\footnotesize} | |
487 | % | |
488 | % This is also defined with the meticulous care of |\normalsize|, and | |
489 | % altered in the same way as for |\small|. | |
490 | % | |
491 | % \begin{macrocode} | |
492 | %<+text>\let\footnotesize\normalsize | |
493 | %<*8pt|9pt|10pt|11pt|12pt> | |
494 | \newcommand\footnotesize{% | |
495 | %<*8pt> | |
496 | \@setfontsize\footnotesize\@vipt\@viipt% | |
0ef5b158 MW |
497 | \set@vsep\abovedisplayskip6\p@\@plus2\p@\@minus4\p@% |
498 | \set@vsep\abovedisplayshortskip\z@\@plus\p@% | |
499 | \set@vsep\belowdisplayshortskip3\p@\@plus\p@\@minus2\p@% | |
1ffa9044 | 500 | %</8pt> |
501 | %<*9pt> | |
502 | \@setfontsize\footnotesize\@viipt{8.4}% | |
0ef5b158 MW |
503 | \set@vsep\abovedisplayskip6\p@\@plus2\p@\@minus4\p@% |
504 | \set@vsep\abovedisplayshortskip\z@\@plus\p@% | |
505 | \set@vsep\belowdisplayshortskip3\p@\@plus\p@\@minus2\p@% | |
1ffa9044 | 506 | %</9pt> |
507 | %<*10pt> | |
508 | \@setfontsize\footnotesize\@viiipt{9.5}% | |
0ef5b158 MW |
509 | \set@vsep\abovedisplayskip6\p@\@plus2\p@\@minus4\p@% |
510 | \set@vsep\abovedisplayshortskip\z@\@plus\p@% | |
511 | \set@vsep\belowdisplayshortskip3\p@\@plus\p@\@minus2\p@% | |
1ffa9044 | 512 | %</10pt> |
513 | %<*11pt> | |
514 | \@setfontsize\footnotesize\@ixpt{11}% | |
0ef5b158 MW |
515 | \set@vsep\abovedisplayskip8\p@\@plus2\p@\@minus4\p@% |
516 | \set@vsep\abovedisplayshortskip\z@\@plus\p@% | |
517 | \set@vsep\belowdisplayshortskip4\p@\@plus2\p@\@minus2\p@% | |
1ffa9044 | 518 | %</11pt> |
519 | %<*12pt> | |
520 | \@setfontsize\footnotesize\@xpt\@xiipt | |
0ef5b158 MW |
521 | \set@vsep\abovedisplayskip10\p@\@plus2\p@\@minus5\p@% |
522 | \set@vsep\abovedisplayshortskip\z@\@plus3\p@% | |
523 | \set@vsep\belowdisplayshortskip6\p@\@plus3\p@\@minus3\p@% | |
1ffa9044 | 524 | %</12pt> |
525 | \def\@listi{% | |
526 | \leftmargin\leftmargini% | |
0ef5b158 MW |
527 | \topsep\@parshortfall% |
528 | \parsep\@parskip% | |
1ffa9044 | 529 | \itemsep\z@% |
530 | }% | |
531 | \belowdisplayskip\abovedisplayskip% | |
532 | \@setparskip% | |
533 | } | |
534 | %</8pt|9pt|10pt|11pt|12pt> | |
535 | % \end{macrocode} | |
536 | % \end{macro} | |
537 | % | |
538 | % The other sizes are all much simpler. We introduce a new size, | |
539 | % |\listingsize|, which is used for the \env{listing} environment, to ensure | |
540 | % that 77 columns of text fit across an A5 sheet. | |
541 | % | |
542 | % \begin{macrocode} | |
543 | %<*8pt> | |
544 | \newcommand\scriptsize{\@setfontsize\scriptsize\@vpt\@vipt\@setparskip} | |
545 | \newcommand\tiny{\@setfontsize\tiny{4}\@vpt\@setparskip} | |
546 | \newcommand\large{\@setfontsize\large\@xpt\@xiipt\@setparskip} | |
547 | \newcommand\Large{\@setfontsize\Large\@xipt{13}\@setparskip} | |
548 | \newcommand\LARGE{\@setfontsize\LARGE\@xiipt\@xivpt\@setparskip} | |
549 | \newcommand\huge{\@setfontsize\huge\@xviipt{20}\@setparskip} | |
550 | \newcommand\Huge{\@setfontsize\Huge\@xxpt{26}\@setparskip} | |
1ffa9044 | 551 | %</8pt> |
552 | %<*9pt> | |
553 | \newcommand\scriptsize{\@setfontsize\scriptsize\@vipt\@viipt\@setparskip} | |
554 | \newcommand\tiny{\@setfontsize\tiny\@vpt\@vipt\@setparskip} | |
555 | \newcommand\large{\@setfontsize\large\@xipt{13}\@setparskip} | |
556 | \newcommand\Large{\@setfontsize\Large\@xiipt{14.4}\@setparskip} | |
557 | \newcommand\LARGE{\@setfontsize\LARGE\@xivpt{17}\@setparskip} | |
558 | \newcommand\huge{\@setfontsize\huge\@xviipt{20}\@setparskip} | |
559 | \newcommand\Huge{\@setfontsize\Huge\@xxpt{26}\@setparskip} | |
1ffa9044 | 560 | %</9pt> |
561 | %<*10pt> | |
562 | \newcommand\scriptsize{\@setfontsize\scriptsize\@viipt\@viiipt\@setparskip} | |
563 | \newcommand\tiny{\@setfontsize\tiny\@vpt\@vipt\@setparskip} | |
564 | \newcommand\large{\@setfontsize\large\@xiipt{14}\@setparskip} | |
565 | \newcommand\Large{\@setfontsize\Large\@xivpt{18}\@setparskip} | |
566 | \newcommand\LARGE{\@setfontsize\LARGE\@xviipt{22}\@setparskip} | |
567 | \newcommand\huge{\@setfontsize\huge\@xxpt{25}\@setparskip} | |
568 | \newcommand\Huge{\@setfontsize\Huge\@xxvpt{30}\@setparskip} | |
1ffa9044 | 569 | %</10pt> |
570 | %<*11pt> | |
571 | \newcommand\scriptsize{\@setfontsize\scriptsize\@viiipt{9.5}\@setparskip} | |
572 | \newcommand\tiny{\@setfontsize\tiny\@vipt\@viipt\@setparskip} | |
573 | \newcommand\large{\@setfontsize\large\@xiipt{14}\@setparskip} | |
574 | \newcommand\Large{\@setfontsize\Large\@xivpt{18}\@setparskip} | |
575 | \newcommand\LARGE{\@setfontsize\LARGE\@xviipt{22}\@setparskip} | |
576 | \newcommand\huge{\@setfontsize\huge\@xxpt{25}\@setparskip} | |
577 | \newcommand\Huge{\@setfontsize\Huge\@xxvpt{30}\@setparskip} | |
1ffa9044 | 578 | %</11pt> |
579 | %<*12pt> | |
580 | \newcommand\scriptsize{\@setfontsize\scriptsize\@viiipt{9.5}\@setparskip} | |
581 | \newcommand\tiny{\@setfontsize\tiny\@vipt\@viipt\@setparskip} | |
582 | \newcommand\large{\@setfontsize\large\@xivpt{18}\@setparskip} | |
583 | \newcommand\Large{\@setfontsize\Large\@xviipt{22}\@setparskip} | |
584 | \newcommand\LARGE{\@setfontsize\LARGE\@xxpt{25}\@setparskip} | |
585 | \newcommand\huge{\@setfontsize\huge\@xxvpt{30}\@setparskip} | |
586 | \let\Huge\huge | |
1ffa9044 | 587 | %</12pt> |
c3f26ad3 | 588 | %<+8pt|9pt|10pt|11pt|12pt>\let\listingsize\footnotesize |
1ffa9044 | 589 | %<*text> |
590 | \def\scriptsize{\@setfontsize\scriptsize\@xpt\@xiipt\@setparskip} | |
591 | \let\tiny\scriptsize | |
592 | \let\large\scriptsize | |
593 | \let\Large\scriptsize | |
594 | \let\LARGE\scriptsize | |
595 | \let\huge\scriptsize | |
596 | \let\Huge\scriptsize | |
597 | \let\listingsize\scriptsize | |
598 | % | |
599 | \let\txt@selectfont\selectfont | |
600 | \def\selectfont{% | |
601 | \fontfamily\ttdefault% | |
602 | \fontseries{m}% | |
603 | \fontshape{n}% | |
604 | \txt@selectfont% | |
605 | } | |
606 | %</text> | |
607 | %</8pt|9pt|10pt|11pt|12pt|text> | |
608 | % \end{macrocode} | |
609 | % | |
610 | % \subsection{Paragraph layout} | |
611 | % | |
612 | % Here we define various paragraph layout parameters. | |
613 | % | |
614 | % First, set up the line separation parameters. |\baselineskip| is set | |
615 | % up by the individual size commands. | |
616 | % | |
617 | % \begin{macrocode} | |
618 | %<*strayman> | |
619 | \lineskip\p@ | |
620 | \normallineskip\p@ | |
621 | % \end{macrocode} | |
622 | % | |
623 | % We don't try to stretch the baselines apart: | |
624 | % | |
625 | % \begin{macrocode} | |
626 | \renewcommand\baselinestretch{} | |
627 | % \end{macrocode} | |
628 | % | |
0ef5b158 | 629 | % Paragraph indentation is set up later. |
1ffa9044 | 630 | % |
631 | % Set up some standard penalty values. | |
632 | % | |
633 | % \begin{macrocode} | |
634 | \@lowpenalty 51 | |
635 | \@medpenalty 151 | |
636 | \@highpenalty 301 | |
637 | %</strayman> | |
638 | % \end{macrocode} | |
639 | % | |
640 | % \subsection{Page layout} | |
641 | % | |
642 | % Our layout is a bit different to the standard \LaTeX\ ones: we leave a lot | |
643 | % of space down the left hand side: this is reserved for headings and | |
644 | % marginal notes. | |
645 | % | |
646 | % Calculating the size of the space on the left, which we call |\leftindent|, | |
647 | % is complicated. We want to use as much of the width of the page as | |
648 | % possible, unlike the \LaTeX\ defaults, making sure that we can fit on | |
649 | % 77 columns of |\listingsize\tt| text. We also try to make space for a | |
650 | % reasonable amount of marginal text, although we don't worry too much if | |
651 | % that suffers. | |
652 | % | |
653 | % The calculation is done as follows. More than about 40\,mm of margin will | |
654 | % look very strange. We must have at least 104\,mm of main text, which | |
655 | % leaves 20\,mm for the notes on A5 paper (actually, 17\,mm, since we leave | |
656 | % 3\,mm gap between the notes and the main text). We divide the page | |
657 | % horizontally into $s$\,mm of left border, $m$\,mm of marginal notes, | |
658 | % $t$\,mm of body text, and another $s$\,mm of right border, giving | |
659 | % a total of $w$\,mm. The value $s$ is given to us by the parameter | |
660 | % |\pagesurround|. | |
661 | % | |
662 | % Articles look odd with a big gap down the side, so this is reduced when | |
663 | % necessary. | |
664 | % | |
665 | % We calculate the quantity~$m$ as $\min\bigl(40,17(w-2s-3)/121+3\bigr)$\@. | |
666 | % Then we calculate $t=w-m-24-3$. | |
667 | % | |
668 | % \begin{macrocode} | |
669 | %<*8pt|9pt|10pt|11pt|12pt|text> | |
670 | \newdimen\leftindent | |
671 | %<*8pt|9pt|10pt|11pt|12pt> | |
672 | \leftindent\paperwidth | |
673 | \if@offsetpages | |
674 | \advance\leftindent-2\pagesurround | |
675 | \advance\leftindent-3mm | |
676 | \leftindent0.1405\leftindent | |
677 | \advance\leftindent3mm | |
678 | \ifdim\leftindent>40mm\relax | |
679 | \leftindent40mm | |
680 | \fi | |
681 | \if@article\divide\leftindent\tw@\fi | |
682 | \ifdim\leftindent<15mm\leftindent15mm\fi | |
683 | \else | |
684 | \leftindent\z@ | |
685 | \fi | |
686 | %</8pt|9pt|10pt|11pt|12pt> | |
687 | %<+text>\leftindent8\tt@chw | |
688 | % \end{macrocode} | |
689 | % | |
690 | % In two-column layouts, we prevent headings from being outdented, by | |
691 | % zeroing |\sectindent|. Chapter headings and suchlike are still outdented | |
692 | % as before. We do not support margin paragraphs in two-column layouts. | |
693 | % | |
694 | % \begin{macrocode} | |
695 | \newdimen\sectindent | |
696 | \if@twocolumn | |
697 | \sectindent\z@ | |
698 | \else | |
699 | \sectindent\if@numbering\z@\else\if@article\else\tw@\fi\leftindent\fi | |
700 | \fi | |
701 | % \end{macrocode} | |
702 | % | |
703 | % Having set up the size of the margin, we can get on with the rest of the | |
704 | % setting up. | |
705 | % | |
706 | % First, we fix |\hoffset| and |\voffset| so we can work on the whole size | |
707 | % of the paper. | |
708 | % | |
709 | % \begin{macrocode} | |
710 | \advance\hoffset-1in | |
711 | \advance\voffset-1in | |
712 | % \end{macrocode} | |
713 | % | |
714 | % Now we can design the page layout in earnest. We begin with the vertical | |
715 | % layout. | |
716 | % | |
717 | % \begin{macrocode} | |
718 | %<+8pt>\topskip8\p@ | |
719 | %<+9pt>\topskip9\p@ | |
720 | %<+10pt>\topskip10\p@ | |
721 | %<+11pt>\topskip11\p@ | |
722 | %<+12pt>\topskip12\p@ | |
723 | %<+text>\topskip\tt@chh | |
724 | %<-text>\topmargin\pagesurround | |
725 | %<+text>\topmargin\z@ | |
726 | %<-text>\headheight12\p@ | |
727 | %<+text>\headheight12\p@ | |
728 | %<-text>\headsep.5\pagesurround | |
729 | %<+text>\headsep2\tt@chh | |
730 | %<+text>\advance\headsep-12\p@ | |
731 | %<-text>\footskip12\p@ | |
732 | %<-text>\advance\footskip.5\pagesurround | |
733 | %<+text>\footskip2\tt@chh | |
734 | \textheight\paperheight | |
735 | %<-text>\advance\textheight-24\p@ | |
736 | %<-text>\advance\textheight-3\pagesurround | |
737 | %<+text>\advance\textheight-4\tt@chh | |
738 | % \end{macrocode} | |
739 | % | |
740 | % Now we define the horizontal layout. | |
741 | % | |
742 | % \begin{macrocode} | |
743 | \oddsidemargin\leftindent | |
744 | %<-text>\advance\oddsidemargin\pagesurround | |
745 | \evensidemargin\oddsidemargin | |
746 | \textwidth\paperwidth | |
747 | \advance\textwidth-\oddsidemargin | |
748 | %<-text> \advance\textwidth-\pagesurround | |
749 | %<-text>\marginparsep3mm | |
750 | %<+text>\marginparsep\tt@chw | |
751 | \marginparwidth\leftindent | |
752 | \advance\marginparwidth-\marginparsep | |
753 | % \end{macrocode} | |
754 | % | |
755 | % Setting |\maxdepth| is fairly simple. This looks odd, because normally | |
756 | % there's some messing for compatibility with \LaTeX~2.09. | |
757 | % | |
758 | % \begin{macrocode} | |
759 | \maxdepth.5\topskip | |
760 | \@maxdepth\maxdepth | |
761 | % \end{macrocode} | |
762 | % | |
763 | % Marginal notes need some setting up. | |
764 | % | |
765 | % \begin{macrocode} | |
766 | \marginparpush5\p@ | |
767 | % \end{macrocode} | |
fddb126a | 768 | % |
1ffa9044 | 769 | % Footnotes need some setting up now. |
770 | % | |
771 | % \begin{macrocode} | |
772 | %<+8pt>\footnotesep5.8\p@ | |
773 | %<+9pt>\footnotesep6.2\p@ | |
774 | %<+10pt>\footnotesep6.65\p@ | |
775 | %<+11pt>\footnotesep7.7\p@ | |
776 | %<+12pt>\footnotesep8.4\p@ | |
777 | %<+8pt>\setlength{\skip\footins}{7\p@\@plus4\p@\@minus2\p@} | |
778 | %<+9pt>\setlength{\skip\footins}{8\p@\@plus4\p@\@minus2\p@} | |
779 | %<+10pt>\setlength{\skip\footins}{9\p@\@plus4\p@\@minus2\p@} | |
780 | %<+11pt>\setlength{\skip\footins}{10\p@\@plus4\p@\@minus2\p@} | |
781 | %<+12pt>\setlength{\skip\footins}{10.8\p@\@plus4\p@\@minus2\p@} | |
782 | %</8pt|9pt|10pt|11pt|12pt|text> | |
783 | % \end{macrocode} | |
784 | % | |
785 | % \subsection{Float placement} | |
786 | % | |
787 | % First, we determine how we position the floats on the page. | |
788 | % | |
789 | % \begin{macrocode} | |
790 | %<*strayman> | |
791 | \setcounter{topnumber}{2} | |
792 | \renewcommand\topfraction{.7} | |
793 | \setcounter{bottomnumber}{1} | |
794 | \renewcommand\bottomfraction{.3} | |
795 | \setcounter{totalnumber}{3} | |
796 | \renewcommand\textfraction{.1} | |
797 | \renewcommand\floatpagefraction{.8} | |
798 | \setcounter{dbltopnumber}{2} | |
799 | \renewcommand\dbltopfraction{.7} | |
800 | \renewcommand\dblfloatpagefraction{.5} | |
801 | %</strayman> | |
802 | % \end{macrocode} | |
803 | % | |
804 | % Now we define the glue which surrounds floats. | |
805 | % | |
806 | % \begin{macrocode} | |
807 | %<*8pt|9pt|10pt|11pt|12pt> | |
808 | \floatsep12\p@\@plus2\p@\@minus2\p@ | |
809 | \textfloatsep20\p@\@plus2\p@\@minus4\p@ | |
810 | \dbltextfloatsep20\p@\@plus2\p@\@minus4\p@ | |
811 | %<+8pt|9pt|10pt|11pt>\intextsep12\p@\@plus2\p@\@minus 2\p@ | |
812 | %<+8pt|9pt|10pt|11pt>\dblfloatsep12\p@\@plus2\p@\@minus 2\p@ | |
813 | %<+12pt>\intextsep14\p@\@plus4\p@\@minus 4\p@ | |
814 | %<+12pt>\dblfloatsep14\p@\@plus2\p@\@minus 4\p@ | |
815 | % \end{macrocode} | |
816 | % | |
817 | % We must now define the parameters for float pages and columns. | |
818 | % | |
819 | % \begin{macrocode} | |
820 | \@fptop0\p@\@plus 1fil | |
821 | %<+8pt|9pt|10pt|11pt>\@fpsep8\p@\@plus2fil | |
822 | %<+12pt>\@fpsep10\p@\@plus2fil | |
823 | \@fpbot0\p@\@plus 1fil | |
824 | % | |
825 | \@dblfptop0\p@\@plus 1fil | |
826 | %<+8pt|9pt|10pt|11pt>\@dblfpsep8\p@\@plus 2fil | |
827 | %<+12pt>\@dblfpsep10\p@\@plus2fil | |
828 | \@dblfpbot0\p@\@plus 1fil | |
829 | %</8pt|9pt|10pt|11pt|12pt> | |
830 | % \end{macrocode} | |
831 | % | |
832 | % \section{Headers and footers} | |
833 | % | |
834 | % This part defines the standard page styles. By default, \strayman\ | |
835 | % imports \package{fancyheadings} and uses them, although this section is | |
836 | % retained in case anything actually needs the original \LaTeX-style | |
837 | % headings. | |
838 | % | |
839 | % \begin{macrocode} | |
840 | %<*strayman> | |
841 | \def\ps@headings{% | |
842 | \let\@oddfoot\@empty\let\@evenfoot\@empty | |
843 | \def\@evenhead{\thepage\hfil\slshape\leftmark}% | |
844 | \def\@oddhead{{\slshape\rightmark}\hfil\thepage}% | |
845 | \let\@mkboth\markboth | |
420183b8 MW |
846 | \def\chaptermark##1{\markboth {\thechapter. ##1}{}}% |
847 | \def\sectionmark##1{\markright {\thesection. ##1}}% | |
1ffa9044 | 848 | } |
849 | % | |
850 | \def\ps@myheadings{% | |
851 | \let\@oddfoot\@empty\let\@evenfoot\@empty | |
852 | \def\@evenhead{\thepage\hfil\slshape\leftmark}% | |
853 | \def\@oddhead{{\slshape\rightmark}\hfil\thepage}% | |
854 | \let\@mkboth\@gobbletwo | |
855 | \let\chaptermark\@gobble | |
856 | \let\sectionmark\@gobble | |
857 | } | |
858 | % \end{macrocode} | |
859 | % | |
860 | % \section{Titles} | |
861 | % | |
862 | % \begin{macro}{\maketitle} | |
863 | % This is a bit of a thorny issue at the moment. Really, these titles need | |
864 | % a complete rewrite. The |\maketitle| command will only be used for inside | |
865 | % front covers anyway. I'm wondering if it wouldn't be better just to use | |
866 | % special case code for each individual manual. Until a decision is made, | |
867 | % I'll leave this as it was in \package{book}. | |
868 | % | |
869 | % \begin{note} | |
870 | % This code is largely uncommented. It seems to be fairly straightforward, | |
871 | % and if I do need to change it, I'll probably start again from scratch | |
872 | % anyway. | |
873 | % \end{note} | |
874 | % | |
875 | % \begin{macrocode} | |
876 | \if@titlepage | |
877 | % | |
878 | \newcommand\maketitle{% | |
879 | \begin{titlepage}% | |
880 | \let\footnotesize\small% | |
881 | \let\footnoterule\relax% | |
882 | \null\vfil% | |
883 | \vskip 60\p@% | |
884 | \begin{center}% | |
885 | {\LARGE\@title\par}% | |
886 | \vskip3em% | |
887 | {% | |
888 | \large% | |
889 | \lineskip.75em% | |
890 | \begin{tabular}[t]{c}% | |
891 | \@author% | |
892 | \end{tabular}% | |
893 | \par% | |
894 | }% | |
895 | \vskip1.5em% | |
896 | {\large \@date \par}% % Set date in \large size. | |
897 | \end{center}% | |
898 | \par% | |
899 | \@thanks% | |
900 | \vfil\null% | |
901 | \end{titlepage}% | |
902 | \setcounter{footnote}{0}% | |
903 | \let\thanks\relax% | |
904 | \let\maketitle\relax% | |
905 | \gdef\@thanks{}% | |
906 | \gdef\@author{}% | |
907 | \gdef\@title{}% | |
908 | } | |
909 | % | |
910 | \else | |
911 | % | |
912 | \newcommand\maketitle{% | |
913 | \par% | |
914 | \begingroup% | |
915 | \renewcommand\thefootnote{\fnsymbol{footnote}}% | |
916 | \def\@makefnmark{\hb@xt@\z@{$\m@th^{\@thefnmark}$\hss}}% | |
917 | \long\def\@makefntext##1{% | |
918 | \parindent1em\noindent% | |
919 | \hb@xt@1.8em{\hss$\m@th^{\@thefnmark}$}##1% | |
920 | }% | |
921 | \if@twocolumn% | |
922 | \ifnum\col@number=\@ne% | |
923 | \@maketitle% | |
924 | \else% | |
925 | \twocolumn[\@maketitle]% | |
926 | \fi% | |
927 | \else% | |
928 | \newpage% | |
929 | \global\@topnum\z@% % Prevents figures from going at top of page. | |
930 | \@maketitle% | |
931 | \fi% | |
932 | \thispagestyle{plain}% | |
933 | \@thanks% | |
934 | \endgroup% | |
935 | \setcounter{footnote}{0}% | |
936 | \let\thanks\relax% | |
937 | \let\maketitle\relax% | |
938 | \let\@maketitle\relax% | |
939 | \gdef\@thanks{}% | |
940 | \gdef\@author{}% | |
941 | \gdef\@title{}% | |
942 | } | |
943 | % | |
944 | \fi | |
945 | % | |
946 | \def\@maketitle{% | |
947 | \newpage% | |
948 | \null% | |
949 | \vskip2em% | |
950 | \begin{center}% | |
951 | {\LARGE\@title\par}% | |
952 | \vskip1.5em% | |
953 | {% | |
954 | \large% | |
955 | \lineskip.5em% | |
956 | \begin{tabular}[t]{c}% | |
957 | \@author% | |
958 | \end{tabular}% | |
959 | \par% | |
960 | }% | |
961 | \vskip 1em% | |
962 | {\large\@date}% | |
963 | \end{center}% | |
964 | \par% | |
965 | \vskip1.5em% | |
966 | } | |
967 | % \end{macrocode} | |
968 | % \end{macro} | |
969 | % | |
970 | % \begin{environment}{titlepage} | |
971 | % | |
fddb126a | 972 | % The \env{titlepage} environment typesets its contents on a title page. |
1ffa9044 | 973 | % The implementation is fairly straightforward: we just need to do some |
974 | % fiddling with two-column layouts. We also add in some hacking to make | |
975 | % title pages centred properly, a bit like the \env{central} environment. | |
976 | % | |
977 | % \begin{macrocode} | |
978 | \newenvironment{titlepage}{% | |
979 | \cleardoublepage% | |
980 | \if@twocolumn% | |
981 | \@restonecoltrue\onecolumn% | |
982 | \else% | |
983 | \@restonecolfalse\newpage% | |
984 | \fi% | |
985 | \centrepage% | |
986 | \if@compatibility% | |
987 | \setcounter{page}{0}% | |
988 | \fi% | |
989 | }{% | |
990 | \thispagestyle{empty}% | |
991 | \if@restonecol% | |
992 | \twocolumn% | |
993 | \else% | |
994 | \newpage% | |
995 | \fi% | |
996 | } | |
997 | % \end{macrocode} | |
998 | % \end{environment} | |
999 | % | |
1000 | % \begin{macro}{\centrepage} | |
1001 | % | |
1002 | % Change the page layout to centre everything properly. We guard against | |
1003 | % this sort of thing happening again by clearing |\leftindent| and | |
1004 | % |\sectindent|. This should only be cleared after the page has been | |
1005 | % finished, for obvious reasons. | |
1006 | % | |
1007 | % \begin{macrocode} | |
1008 | \def\centrepage{% | |
1009 | \advance\oddsidemargin-\leftindent% | |
1010 | \advance\evensidemargin-\leftindent% | |
1011 | \advance\textwidth\leftindent% | |
1012 | \advance\linewidth\leftindent% | |
1013 | \advance\leftmargini0.5\leftindent% | |
1014 | \leftindent\z@% | |
1015 | \sectindent\z@% | |
1016 | \hsize\textwidth% | |
1017 | } | |
1018 | % \end{macrocode} | |
1019 | % \end{macro} | |
1020 | % | |
1021 | % \section{Sectioning commands} | |
1022 | % | |
1023 | % In \strayman, quite a lot of the sectioning is different. We | |
1024 | % don't tend to number sections much. Also, the chapter heading style has | |
1025 | % been completely rewritten (several times). | |
1026 | % | |
1027 | % \subsection{Setting up the counters} | |
1028 | % | |
1029 | % This is pretty simple stuff. | |
1030 | % | |
1031 | % \begin{macrocode} | |
1032 | \newcommand\chaptermark[1]{} | |
1033 | \setcounter{secnumdepth}{\if@numbering\if@runinsubsubsec2\else3\fi\else0\fi} | |
1034 | \newcounter {part} | |
1035 | \newcounter {chapter} | |
1036 | \newcounter {section}[chapter] | |
1037 | \newcounter {subsection}[section] | |
1038 | \newcounter {subsubsection}[subsection] | |
1039 | \newcounter {paragraph}[subsubsection] | |
1040 | \newcounter {subparagraph}[paragraph] | |
1041 | \renewcommand\thepart {\Roman{part}} | |
1042 | \renewcommand\thechapter {\arabic{chapter}} | |
1043 | \if@article | |
1044 | \renewcommand\thesection {\arabic{section}} | |
1045 | \else | |
1046 | \renewcommand\thesection {\thechapter.\arabic{section}} | |
1047 | \fi | |
1048 | \renewcommand\thesubsection {\thesection.\arabic{subsection}} | |
1049 | \renewcommand\thesubsubsection {\thesubsection .\arabic{subsubsection}} | |
1050 | \renewcommand\theparagraph {\thesubsubsection.\arabic{paragraph}} | |
1051 | \renewcommand\thesubparagraph {\theparagraph.\arabic{subparagraph}} | |
1052 | % \end{macrocode} | |
1053 | % | |
1054 | % \subsection{Frontmatter, mainmatter and backmatter} | |
1055 | % | |
1056 | % We start off thinking we're in the main matter. The user ought to put a | |
1057 | % |\frontmatter| command at the beginning of the document if this is not | |
1058 | % correct, as it usually won't be. | |
1059 | % | |
1060 | % \begin{macrocode} | |
40e73a54 MW |
1061 | \if@article\else% |
1062 | \newif\if@mainmatter | |
1063 | \@mainmattertrue | |
1064 | \newcommand\frontmatter{% | |
1ffa9044 | 1065 | \cleardoublepage% |
40e73a54 MW |
1066 | \@mainmatterfalse% |
1067 | \pagenumbering{roman}% | |
1068 | } | |
1069 | \newcommand\mainmatter{% | |
1070 | \cleardoublepage% | |
1071 | \@mainmattertrue% | |
1072 | \pagenumbering{arabic}% | |
1073 | } | |
1074 | \newcommand\backmatter{% | |
1075 | \if@openright% | |
1076 | \cleardoublepage% | |
1077 | \else% | |
1078 | \clearpage% | |
1079 | \fi% | |
1080 | \@mainmatterfalse% | |
1081 | } | |
1082 | \fi | |
1ffa9044 | 1083 | % \end{macrocode} |
1084 | % | |
1085 | % \subsection{Abstracts} | |
1086 | % | |
1087 | % \begin{environment}{abstract} | |
1088 | % | |
1089 | % The \env{abstract} environment reduces the type size and margins slightly. | |
1090 | % Abstracts are placed on their own pages when the |titlepage| option is | |
1091 | % enabled. The code is filched from the LaTeX article class. | |
1092 | % | |
1093 | % \begin{macrocode} | |
1094 | \if@titlepage | |
1095 | \newenvironment{abstract}{% | |
1096 | \titlepage | |
1097 | \null\vfil | |
1098 | \@beginparpenalty\@lowpenalty | |
1099 | \begin{center}% | |
1100 | \bfseries \abstractname | |
1101 | \@endparpenalty\@M | |
1102 | \end{center}}% | |
1103 | {\par\vfil\null\endtitlepage} | |
1104 | \else | |
1105 | \newenvironment{abstract}{% | |
1106 | \if@twocolumn | |
1107 | \section*{\abstractname}% | |
1108 | \else | |
1109 | \small | |
1110 | \list{}{% | |
1111 | \def\makelabel##1{% | |
1112 | \normalfont% | |
1113 | \fontseries{b}\fontfamily\headdefault\selectfont% | |
1114 | ##1% | |
1115 | }% | |
1116 | \labelsep1em\labelwidth\z@\itemindent\labelsep% | |
1117 | \rightmargin\leftmargin% | |
1118 | } | |
1119 | \item[\abstractname]% | |
1120 | \fi} | |
1121 | {\if@twocolumn\else\endlist\fi} | |
1122 | \fi | |
1123 | % \end{macrocode} | |
1124 | % \end{environment} | |
1125 | % | |
1126 | % \subsection{Appendices} | |
1127 | % | |
1128 | % \begin{macro}{\appendix} | |
1129 | % | |
1130 | % This command sets everything up to typeset the appendix. | |
1131 | % | |
1132 | % \begin{macrocode} | |
1133 | \newcommand\appendix{% | |
1134 | \par% | |
1135 | \setcounter{chapter}{0}% | |
1136 | \setcounter{section}{0}% | |
1137 | \renewcommand\@chapapp{\appendixname}% | |
1138 | \if@article% | |
1139 | \renewcommand\thesection{\Alph{section}}% | |
1140 | \else% | |
1141 | \renewcommand\thechapter{\Alph{chapter}}% | |
1142 | \fi% | |
1143 | \@appendixtrue% | |
1144 | } | |
1145 | % \end{macrocode} | |
1146 | % \end{macro} | |
1147 | % | |
1148 | % \subsection{Parts} | |
1149 | % | |
1150 | % Part headings are typeset on completely unadorned sheets, devoid of page | |
1151 | % numbers and suchlike. Because of the strange page layout, we have to | |
1152 | % put the part heading into a |central| environment. to stop the page looking | |
1153 | % horribly lopsided. | |
1154 | % | |
1155 | % \begin{macro}{\part} | |
1156 | % | |
1157 | % The |\part| macro moves to an appropriate page, changes the pagestyle to | |
1158 | % empty to switch off page numbering, and then calls |\@part| or |\@spart| | |
1159 | % as appropriate, according to whether a \lit* was supplied. We put some | |
1160 | % |\vfil| glue in, to vertically centre anything that these commands typeset, | |
1161 | % and ensure printing in a single column. | |
1162 | % | |
1163 | % \begin{macrocode} | |
35d0f966 MW |
1164 | \if@article |
1165 | \newcommand\part{% | |
1166 | \if@noskipsec\leavevmode\fi\par% | |
1167 | \addvspace{4ex}% | |
1168 | \@afterindentfalse | |
1169 | \secdef\@part\@spart% | |
1170 | } | |
1171 | \else | |
1172 | \newcommand\part{% | |
1173 | \cleardoublepage% | |
1174 | \thispagestyle{empty}% | |
1175 | \if@twocolumn% | |
1176 | \onecolumn% | |
1177 | \@tempswatrue% | |
1178 | \else% | |
1179 | \@tempswafalse% | |
1180 | \fi% | |
1181 | \hbox{}\vfil% | |
1182 | \secdef\@part\@spart% | |
1183 | } | |
1184 | \fi | |
1ffa9044 | 1185 | % \end{macrocode} |
1186 | % | |
1187 | % \begin{macro}{\@part} | |
1188 | % | |
1189 | % This is where most of the part heading typesetting is done. We stick a | |
1190 | % line in the contents file, clear the heading markers, and typeset the | |
1191 | % heading in the biggest letters we can find. When we're done, we call | |
1192 | % |\@endpart| to do some common cleaning up. | |
1193 | % | |
1194 | % \begin{macrocode} | |
35d0f966 MW |
1195 | \if@article |
1196 | \def\@part[#1]#2{% | |
1197 | \ifnum\c@secnumdepth>\m@ne\relax% | |
1198 | \refstepcounter{part}% | |
1199 | \addcontentsline{toc}{part}{\thepart\hspace{1em}#1}% | |
1200 | \else% | |
1201 | \addcontentsline{toc}{part}{#1}% | |
1202 | \fi% | |
1203 | \begingroup% | |
1204 | \parindent\z@ \raggedright \interlinepenalty\@M% | |
1205 | \reset@font\bfseries\headfam% | |
1206 | \ifnum\c@secnumdepth>\m@ne% | |
1207 | \Large\partname\nobreakspace\thepart \par\nobreak% | |
1208 | \fi% | |
1209 | \huge #2% | |
1210 | \markboth{}{}\par% | |
1211 | \endgroup% | |
1212 | \nobreak \vskip3ex \@afterheading% | |
1213 | } | |
1214 | \else | |
1215 | \def\@part[#1]#2{% | |
1216 | \ifnum\c@secnumdepth>-2\relax% | |
1217 | \refstepcounter{part}% | |
1218 | \addcontentsline{toc}{part}{\thepart\hspace{1em}#1}% | |
1219 | \else% | |
1220 | \addcontentsline{toc}{part}{#1}% | |
1221 | \fi% | |
1222 | \markboth{}{}% | |
1223 | \begin{centrepage}% | |
1224 | \centering% | |
1225 | \interlinepenalty\@M% | |
1226 | \reset@font% | |
1227 | \ifnum\c@secnumdepth>-2\relax% | |
1228 | \huge\bfseries\headfam\partname~\thepart% | |
1229 | \par% | |
1230 | \vskip20\p@ | |
1231 | \fi% | |
1232 | \normalfont\Huge\bfseries\headfam#2\par% | |
1233 | \@endpart% | |
1234 | } | |
1235 | \fi | |
1ffa9044 | 1236 | % \end{macrocode} |
1237 | % \end{macro} | |
1238 | % | |
1239 | % \begin{macro}{\@spart} | |
1240 | % | |
1241 | % Here we typeset just the part heading: numbers have been suppressed. Also | |
1242 | % we don't put things into the contents file. Otherwise, this is similar to | |
1243 | % |\@part|. | |
1244 | % | |
1245 | % \begin{macrocode} | |
35d0f966 MW |
1246 | \if@article |
1247 | \def\@spart#1{% | |
1248 | \begingroup% | |
1249 | \parindent\z@ \raggedright \interlinepenalty\@M% | |
1250 | \reset@font\bfseries\headfam% | |
1251 | \huge #1% | |
1252 | \markboth{}{}\par% | |
1253 | \endgroup% | |
1254 | \nobreak \vskip3ex \@afterheading% | |
1255 | } | |
1256 | \else | |
1257 | \def\@spart#1{% | |
1258 | \begin{centrepage}% | |
1259 | \centering% | |
1260 | \interlinepenalty\@M% | |
1261 | \reset@font% | |
1262 | \normalfont\Huge\bfseries\headfam#1\par% | |
1263 | \@endpart% | |
1264 | } | |
1265 | \fi | |
1ffa9044 | 1266 | % \end{macrocode} |
1267 | % \end{macro} | |
1268 | % | |
1269 | % \begin{macro}{\@endpart} | |
1270 | % | |
1271 | % This does the clearing up operation after a part has been typeset. We | |
1272 | % insert the other |\vfil| glue to centre the heading, clear the other | |
1273 | % side of the page, if printing two-sided, and return if necessary to | |
1274 | % two-column printing. | |
1275 | % | |
1276 | % \begin{macrocode} | |
1277 | \def\@endpart{% | |
1278 | \vfil\newpage% | |
1279 | \end{centrepage}% | |
1280 | \if@twoside% | |
1281 | \hbox{}% | |
1282 | \thispagestyle{empty}% | |
1283 | \newpage% | |
1284 | \fi% | |
1285 | \if@tempswa% | |
1286 | \twocolumn% | |
1287 | \fi% | |
1288 | } | |
1289 | % \end{macrocode} | |
1290 | % \end{macro} | |
1291 | % \end{macro} | |
1292 | % | |
1293 | % \subsection{Chapters} | |
1294 | % | |
1295 | % The chapter typesetting has been more-or-less rewritten. We'll follow this | |
1296 | % in a reasonable amount of detail. | |
1297 | % | |
1298 | % \begin{macro}{\@chapapp} | |
1299 | % | |
1300 | % Because |\appendix| needs to change what chapters are called, we add a | |
1301 | % level of indirection through |\@chapapp|: | |
1302 | % | |
1303 | % \begin{macrocode} | |
1304 | \newcommand\@chapapp{\chaptername} | |
1305 | % \end{macrocode} | |
1306 | % \end{macro} | |
1307 | % | |
1308 | % \begin{macro}{\chapter} | |
1309 | % | |
1310 | % The |\chapter| command is the main dispatcher for chapters. We move to | |
1311 | % an appropriate page, depending on the |openright| setting, suppress | |
1312 | % headers, and then call |\@chapter| or |\@schapter| as appropriate. | |
1313 | % | |
1314 | % \begin{macrocode} | |
40e73a54 MW |
1315 | \if@article\else |
1316 | \newcommand\chapter{% | |
1317 | \if@openright% | |
1318 | \cleardoublepage% | |
1319 | \else% | |
1320 | \clearpage% | |
1321 | \fi% | |
1322 | \thispagestyle{plain}% | |
1323 | \global\@topnum\z@% | |
1324 | \@afterindentfalse% | |
1325 | \secdef\@chapter\@schapter% | |
1326 | } | |
1327 | \fi | |
1ffa9044 | 1328 | % \end{macrocode} |
1329 | % | |
1330 | % \begin{macro}{\@chapter} | |
1331 | % | |
1332 | % There's a lot of messing about to do, depending on whether we're in the | |
1333 | % main matter and so on. We'll take this carefully. | |
1334 | % | |
1335 | % \begin{macrocode} | |
1336 | \def\@chapter[#1]#2{% | |
1337 | % \end{macrocode} | |
1338 | % | |
1339 | % The first thing to do is put a line in the contents table. We need to | |
1340 | % check |secnumdepth| and the |mainmatter| flag for this: we should only | |
1341 | % include a number if both these tests pass. In this case, we also type a | |
1342 | % message on the terminal. | |
1343 | % | |
1344 | % \begin{macrocode} | |
1345 | \ifnum\c@secnumdepth>\m@ne% | |
1346 | \if@mainmatter% | |
1347 | \refstepcounter{chapter}% | |
1348 | \typeout{\@chapapp\space\thechapter.}% | |
1349 | \addcontentsline{toc}{chapter}{\protect\numberline{\thechapter}#1}% | |
1350 | \else | |
1351 | \addcontentsline{toc}{chapter}{#1}% | |
1352 | \fi | |
1353 | \else | |
1354 | \addcontentsline{toc}{chapter}{#1} | |
1355 | \fi | |
1356 | % \end{macrocode} | |
1357 | % | |
1358 | % Now we put a bit of space in the lists of figures and tables, and set up | |
1359 | % the mark to put the chapter heading in the running header. | |
1360 | % \begin{macrocode} | |
1361 | \chaptermark{#1}% | |
1362 | \addtocontents{lof}{\protect\addvspace{10\p@}}% | |
1363 | \addtocontents{lot}{\protect\addvspace{10\p@}}% | |
1364 | % \end{macrocode} | |
1365 | % | |
1366 | % Finally, we need to decide how to typeset the chapter heading. On | |
1367 | % single-column chapters, this is easy. On double-column formats, we need | |
1368 | % to do horrid things with |\@topnewpage|. | |
1369 | % | |
1370 | % \begin{macrocode} | |
1371 | \if@twocolumn% | |
1372 | \@topnewpage[\@makechapterhead{% | |
1373 | \hb@xt@.5\leftindent{\thechapter\hfil}% | |
1374 | }{#2}]% | |
1375 | \else% | |
1376 | \@makechapterhead{% | |
1377 | \hb@xt@.5\leftindent{\thechapter\hfil}% | |
1378 | }{#2}% | |
1379 | \@afterheading% | |
1380 | \fi% | |
1381 | } | |
1382 | % \end{macrocode} | |
1383 | % \end{macro} | |
1384 | % | |
1385 | % \begin{macro}{\@makechapterhead} | |
1386 | % | |
1387 | % This macro actually does the job of typesetting a chapter heading. Call | |
1388 | % this routine as |\@makechapterhead{|\synt{number}|}{|\synt{title}|}|. | |
1389 | % Here, \synt{number} is how to typeset the chapter number, and \synt{title} | |
1390 | % is the rest of the title. To suppress the number, just leave \synt{number} | |
1391 | % empty. The number is only typeset when it is correct to do so anyway. | |
1392 | % | |
1393 | % The spacing is rather awkward. We have to cope with two-column layouts, | |
1394 | % which seem to require different spacing. In a double-column layout, | |
1395 | % the title is normally one |\baselineskip| too high. Also, the space I | |
1396 | % add at the bottom of the heading gets eaten in double-column chapters, | |
1397 | % because I'm actually typesetting into a vbox which is floated to the top | |
1398 | % by \LaTeX\ in a fairly horrid way. This can't really be worked around, | |
1399 | % so we just make the space beneath the heading equal to |\dbltextfloatsep|, | |
1400 | % which is what gets added anyway. | |
1401 | % | |
1402 | % The other snags are to do with the rule after the chapter heading. | |
1403 | % Firstly, this is meant to be typeset into the left margin, like the | |
1404 | % heading itself, which is a bit messy. More awkwardly, we have to be | |
1405 | % careful not to let the depth of the line vary when the chapter heading has | |
1406 | % descenders, although obviously we must lower the rule if the heading really | |
1407 | % is very deep indeed. | |
1408 | % | |
fddb126a | 1409 | % |
1ffa9044 | 1410 | % We'll approach this a bit at a time. |
1411 | % | |
1412 | % \begin{macrocode} | |
1413 | \def\@makechapterhead#1#2{% | |
1414 | \begingroup% % Stop my hacking messing things up | |
1415 | % \end{macrocode} | |
1416 | % | |
1417 | % First, the top spacing. This is divided into two parts, by an invisible | |
1418 | % rule: the |\vskip| above the rule is eaten by \TeX\ if this is a genuine | |
1419 | % new page, but put into the floating vbox if this is a two-column affair. | |
1420 | % The second bit is added in both cases. | |
1421 | % | |
1422 | % \begin{macrocode} | |
1423 | \vskip\baselineskip% % This is gobbled in single column | |
1424 | \hrule\@height\z@% % Stops TeX from binning my vskips | |
1425 | \vskip32\p@% % Start chapters in a funny place | |
1426 | % \end{macrocode} | |
1427 | % | |
1428 | % Now we actually typeset the heading. This is fairly simple: we must just | |
1429 | % check that we need to typeset the number. | |
1430 | % | |
1431 | % \begin{macrocode} | |
1432 | \normalfont\Huge\bfseries\headfam% % Choose a nice font for it | |
1433 | \raggedright % Don't justify -- it looks nasty | |
1434 | \@hangfrom{\hskip-\leftindent}% % Start text at `real left margin' | |
1435 | \ifnum\c@secnumdepth>\m@ne% % Do we typeset chapter numbers? | |
1436 | \if@mainmatter% % Are we past the front matter? | |
1437 | #1% % Yes -- then typeset the number | |
1438 | \fi\fi% % Now back to normality | |
1439 | {#2}% % Typeset the actual chapter head | |
1440 | \par\nobreak% % Back to vmode again, please | |
1441 | % \end{macrocode} | |
1442 | % | |
1443 | % The next tricky bit is the space before the ruleoff. We must be careful | |
1444 | % here: | |
1445 | % | |
1446 | % \begin{itemize} | |
1447 | % | |
1448 | % \item We want the rule to be the right depth below the heading baseline, | |
1449 | % regardless of whether the heading contains descenders: helpfully, \TeX\ | |
1450 | % omits |\baselineskip| glue before and after rules. | |
1451 | % | |
1452 | % \item We want the rule to always be below any oddly deep descenders that | |
1453 | % a strange user might throw at us (e.g., horrid fractions or weird | |
1454 | % |\vrule|s). | |
1455 | % | |
1456 | % \end{itemize} | |
1457 | % | |
1458 | % We accomplish this by scrutinising |\prevdepth| carefully. | |
1459 | % | |
1460 | % \begin{macrocode} | |
1461 | \@tempdima14\p@% % Be this low below the baseline | |
1462 | \advance\@tempdima-\prevdepth% % This is the actual skip then | |
1463 | \ifdim\@tempdima<8\p@% % Is this not enough skippage? | |
1464 | \@tempdima8\p@% % No: then skip some more | |
1465 | \fi% | |
1466 | \vskip\@tempdima% % Skip a bit below the title | |
1467 | % \end{macrocode} | |
1468 | % | |
1469 | % Now we can set the rule. This needs a little care. | |
1470 | % | |
1471 | % \begin{macrocode} | |
1472 | \@tempskipa\textwidth% % Find the width of the column | |
1473 | \advance\@tempskipa\leftindent% % Add on the big lefthand gap | |
1474 | \nointerlineskip% % Don't add any more space please | |
1475 | \moveleft\leftindent\vbox{% % Shift something left by an amount | |
1476 | \hrule\@width\@tempskipa% % Typeset the rule nicely | |
1477 | }% | |
1478 | \nointerlineskip% % Don't leave a gap beneath it | |
1479 | % \end{macrocode} | |
1480 | % | |
1481 | % Finally, we leave a gap. In two-column layouts this is done for us, and | |
1482 | % \LaTeX\ gobbles this glue and replaces it with |\dbltextfloatsep|. To make | |
1483 | % things consistent, this is the glue we use anyway. | |
1484 | % | |
1485 | % \begin{macrocode} | |
1486 | \nobreak% % This would be a bad place to break | |
1487 | \vspace{\dbltextfloatsep}% % Add in some extra glue beneath | |
1488 | \endgroup% | |
1489 | } | |
1490 | % \end{macrocode} | |
1491 | % \end{macro} | |
1492 | % | |
1493 | % \begin{macro}{\@makeschapterhead} | |
1494 | % | |
1495 | % This is now just a veneer onto |\@makechapterhead|. It's needed, because | |
1496 | % other bits of \LaTeX\ call it. | |
1497 | % | |
1498 | % \begin{macrocode} | |
1499 | \def\@makeschapterhead{% | |
1500 | \@makechapterhead{} | |
1501 | } | |
1502 | % \end{macrocode} | |
1503 | % \end{macro} | |
1504 | % | |
1505 | % \begin{macro}{\@schapter} | |
1506 | % | |
1507 | % This macro typesets a starred chapter heading. This is terribly simple, | |
1508 | % compared to the sort of things we've been doing so far. | |
1509 | % | |
1510 | % \begin{macrocode} | |
1511 | \def\@schapter#1{% | |
1512 | \if@twocolumn% | |
1513 | \@topnewpage[\@makeschapterhead{#1}]% | |
1514 | \else% | |
1515 | \@makeschapterhead{#1}% | |
1516 | \@afterheading% | |
1517 | \fi% | |
1518 | } | |
1519 | % \end{macrocode} | |
1520 | % \end{macro} | |
1521 | % \end{macro} | |
1522 | % | |
1523 | % \subsection{The other sectioning commands} | |
1524 | % | |
1525 | % These are all defined through |\@startsection|. They've been modified | |
1526 | % to typeset sections and subsections hanging into the left margin, and to | |
1527 | % moderate the amount of following space, due to the extra |\parskip| already | |
1528 | % introduced. | |
1529 | % | |
1530 | % \begin{macrocode} | |
0ef5b158 MW |
1531 | \def\@defsection#1#2#3#4#5#6{% |
1532 | \expandafter\newcommand\csname#1\endcsname{% | |
1533 | \skip@#4\advance\skip@\ifdim\skip@<\z@-\fi\@parshortfall% | |
1534 | \skip\tw@#5\relax\ifdim\skip\tw@>\z@\advance\skip\tw@\@parshortfall\fi% | |
1535 | \@startsection% | |
1536 | {#1}% | |
1537 | {#2}% | |
1538 | {#3}% | |
1539 | \skip@ | |
1540 | {\skip\tw@}% | |
1541 | {\reset@font#6\bfseries\headfam}% | |
1542 | }% | |
1543 | } | |
1544 | \@defsection | |
1ffa9044 | 1545 | {section}% % Section name (for contents) |
1546 | {1}% % Level number (for numbering) | |
1547 | {-.5\sectindent}% % Indentation of title | |
1548 | {-1.5ex\@plus-1ex\@minus-.2ex}% % Space after title (vert/horiz) | |
1549 | {.3ex\@plus.2ex}% % Space before title | |
1550 | {\reset@font\Large\bfseries\headfam}% How to typeset the title | |
0ef5b158 | 1551 | \@defsection |
1ffa9044 | 1552 | {subsection}% |
1553 | {2}% | |
1554 | {-.25\sectindent}% | |
1555 | {-1.25ex\@plus-1ex\@minus-.2ex}% | |
1556 | {\p@\@plus.2ex}% | |
1557 | {\reset@font\large\bfseries\headfam}% | |
1ffa9044 | 1558 | \if@runinsubsubsec |
0ef5b158 | 1559 | \@defsection |
1ffa9044 | 1560 | {subsubsection}% |
1561 | {3}% | |
1562 | {\z@}% | |
1563 | {0pt\@plus1ex\@minus.2ex}% | |
1564 | {-1em}% | |
1565 | {\reset@font\normalsize\bfseries\headfam}% | |
0ef5b158 | 1566 | \@defsection |
1ffa9044 | 1567 | {paragraph}% |
1568 | {4}% | |
1569 | {\z@}% | |
1570 | {0pt\@plus.5ex\@minus.1ex}% | |
1571 | {-1em}% | |
1572 | {\reset@font\normalsize\bfseries\headfam}% | |
0ef5b158 | 1573 | \@defsection |
1ffa9044 | 1574 | {subparagraph}% |
1575 | {5}% | |
1576 | {\parindent}% | |
1577 | {0pt\@plus.5ex\@minus.1ex}% | |
1578 | {-1em}% | |
1579 | {\reset@font\normalsize\bfseries\headfam}% | |
1ffa9044 | 1580 | \else |
0ef5b158 | 1581 | \@defsection |
1ffa9044 | 1582 | {subsubsection}% |
1583 | {3}% | |
1584 | {\z@}% | |
1585 | {-1.25ex\@plus-1ex\@minus-.2ex}% | |
1586 | {\p@\@plus.2ex}% | |
1587 | {\reset@font\normalsize\bfseries\headfam}% | |
0ef5b158 | 1588 | \@defsection |
1ffa9044 | 1589 | {paragraph}% |
1590 | {4}% | |
1591 | {\z@}% | |
1592 | {0pt\@plus1ex\@minus.2ex}% | |
1593 | {-1em}% | |
1594 | {\reset@font\normalsize\bfseries\headfam}% | |
0ef5b158 | 1595 | \@defsection |
1ffa9044 | 1596 | {subparagraph}% |
1597 | {5}% | |
1598 | {\parindent}% | |
1599 | {0pt\@plus.5ex\@minus.1ex}% | |
1600 | {-1em}% | |
1601 | {\reset@font\normalsize\bfseries\headfam}% | |
1ffa9044 | 1602 | \fi |
1603 | % \end{macrocode} | |
1604 | % | |
1605 | % \subsection{Section number formatting} | |
1606 | % | |
1607 | % \begin{macro}{\@seccntformat} | |
1608 | % | |
1609 | % The macro is given a section counter and must format it in some nice way. | |
1610 | % | |
1611 | % \begin{macrocode} | |
1612 | \def\@seccntformat#1{% | |
1613 | \llap{\csname the#1\endcsname{\normalsize\quad}\hfil}% | |
1614 | } | |
1615 | % | |
1616 | % \subsection{Top level sectioning} | |
1617 | % | |
1618 | % \begin{macro}{\@topsect} | |
1619 | % | |
1620 | % Articles are divided into sections; other documents are divided into | |
1621 | % chapters. Things like the table of contents need to know which. | |
1622 | % | |
1623 | % \begin{macrocode} | |
1624 | \if@article | |
c3f26ad3 | 1625 | \def\@topsect@star{\section*} |
1626 | \let\@topsect\section | |
1ffa9044 | 1627 | \else |
c3f26ad3 | 1628 | \let\@topsect@star\chapter |
1ffa9044 | 1629 | \let\@topsect\chapter |
1630 | \fi | |
1631 | % \end{macrocode} | |
1632 | % | |
1633 | % \end{macro} | |
1634 | % | |
1635 | % | |
1636 | % \section{List handling} | |
1637 | % | |
1638 | % A surprising number of \LaTeX's environments are defined in terms of | |
1639 | % lists, many of which hide the fact by putting the entire text in one big | |
1640 | % item. | |
1641 | % | |
1642 | % This part of the document class has to set up lots of list parameters. | |
1643 | % This is largely the same as the standard classes, altered slightly to cope | |
1644 | % with the different paragraph spacing. | |
1645 | % | |
1646 | % \subsection{General list parameters} | |
1647 | % | |
1648 | % Default left margins for lists: | |
1649 | % | |
1650 | % \begin{macrocode} | |
1651 | \if@twocolumn | |
1652 | \leftmargini2em | |
1653 | \else | |
1654 | \leftmargini2.2em | |
1655 | \fi | |
1656 | \leftmarginii2em | |
1657 | \leftmarginiii1.87em | |
1658 | \leftmarginiv1.7em | |
1659 | \if@twocolumn | |
1660 | \leftmarginv.5em | |
1661 | \leftmarginvi.5em | |
1662 | \else | |
1663 | \leftmarginv1em | |
1664 | \leftmarginvi1em | |
1665 | \fi | |
1666 | % \end{macrocode} | |
0ef5b158 MW |
1667 | % And now we can set the paragraph indent. |
1668 | % \begin{macrocode} | |
1669 | \if@indentpar | |
98945a11 | 1670 | \parindent1.2em |
0ef5b158 MW |
1671 | \else |
1672 | \parindent\z@ | |
1673 | \fi | |
1674 | % \end{macrocode} | |
1ffa9044 | 1675 | % |
1676 | % Other spacing defaults: | |
1677 | % | |
1678 | % \begin{macrocode} | |
1679 | \leftmargin\leftmargini | |
1680 | \labelsep.5em | |
1681 | \labelwidth\leftmargini | |
1682 | \advance\labelwidth-\labelsep | |
1683 | \partopsep\z@\@plus1\p@\@minus1\p@ | |
1684 | % \end{macrocode} | |
1685 | % | |
1686 | % Interline penalties: | |
1687 | % | |
1688 | % \begin{macrocode} | |
1689 | \@beginparpenalty -\@lowpenalty | |
1690 | \@endparpenalty -\@lowpenalty | |
1691 | \@itempenalty -\@lowpenalty | |
1692 | % \end{macrocode} | |
1693 | % | |
1694 | % Now we define the defaults for the list environments. These have managed | |
1695 | % to migrate from the size options into the main document class. | |
1696 | % | |
1697 | % \begin{macrocode} | |
1698 | \def\@listI{% | |
35f7eeda | 1699 | \ifvmode\else\@beginparpenalty\@M\fi% |
1ffa9044 | 1700 | \leftmargin\leftmargini% |
0ef5b158 | 1701 | \parsep\@parskip% |
4ef1fb33 | 1702 | \topsep\@parshortfall% |
1ffa9044 | 1703 | \itemsep\z@% |
1704 | } | |
1705 | \let\@listi\@listI | |
b8d14be9 | 1706 | \@listi% |
1ffa9044 | 1707 | \def\@listii{% |
35f7eeda | 1708 | \ifvmode\else\@beginparpenalty\@M\fi% |
2a8b8e43 | 1709 | \topsep\z@\@plus\p@% |
1ffa9044 | 1710 | \leftmargin\leftmarginii% |
1711 | \labelwidth\leftmarginii% | |
1712 | \advance\labelwidth-\labelsep% | |
1713 | } | |
1714 | \def\@listiii{% | |
35f7eeda | 1715 | \ifvmode\else\@beginparpenalty\@M\fi% |
1ffa9044 | 1716 | \leftmargin\leftmarginiii% |
1717 | \labelwidth\leftmarginiii% | |
1718 | \advance\labelwidth-\labelsep% | |
c3f26ad3 | 1719 | % \partopsep\p@\@plus\z@\@minus\p@% |
1ffa9044 | 1720 | } |
1721 | \def\@listiv{% | |
35f7eeda | 1722 | \ifvmode\else\@beginparpenalty\@M\fi% |
1ffa9044 | 1723 | \leftmargin\leftmarginiv% |
1724 | \labelwidth\leftmarginiv% | |
1725 | \advance\labelwidth-\labelsep% | |
1726 | } | |
1727 | \def\@listv{% | |
35f7eeda | 1728 | \ifvmode\else\@beginparpenalty\@M\fi% |
1ffa9044 | 1729 | \leftmargin\leftmarginv% |
1730 | \labelwidth\leftmarginv% | |
1731 | \advance\labelwidth-\labelsep% | |
1732 | } | |
1733 | \def\@listvi{% | |
35f7eeda | 1734 | \ifvmode\else\@beginparpenalty\@M\fi% |
1ffa9044 | 1735 | \leftmargin\leftmarginvi% |
1736 | \labelwidth\leftmarginvi% | |
1737 | \advance\labelwidth-\labelsep% | |
1738 | } | |
1739 | % \end{macrocode} | |
1740 | % | |
186f3b71 | 1741 | % \subsection{Numbering things} |
1742 | % | |
1743 | % \begin{macro}{\numberwithin} | |
1744 | % | |
1745 | % Does the obvious thing. Optional argument gives numbering style. | |
1746 | % | |
1747 | % \begin{macrocode} | |
1748 | \def\numberwithin{\@testopt\nw@i\arabic} | |
1749 | \def\nw@i[#1]#2#3{% | |
1750 | \@addtoreset{#2}{#3}% | |
1751 | \expandafter\xdef\csname the#2\endcsname{% | |
1752 | \expandafter\noexpand\csname the#3\endcsname.% | |
1753 | \noexpand#1{#2}}% | |
1754 | } | |
1755 | % \end{macrocode} | |
1756 | % | |
1757 | % \end{macro} | |
1758 | % | |
1759 | % \begin{macro}{\removefromreset} | |
1760 | % | |
1761 | % Does the obvious thing. | |
1762 | % | |
1763 | % \begin{macrocode} | |
1764 | \def\removefromreset#1#2{% | |
1765 | \begingroup% | |
1766 | \def\@tempa{#1}% | |
1767 | \toks@{}% | |
1768 | \def\@elt##1{% | |
1769 | \def\@tempb{##1}% | |
1770 | \ifx\@tempa\@tempb% | |
1771 | \else\toks@\expandafter{\the\toks@\@elt{##1}}% | |
1772 | \fi% | |
1773 | } | |
1774 | \csname cl@#2\endcsname% | |
1775 | \expandafter\xdef\csname cl@#2\endcsname{\the\toks@}% | |
1776 | \endgroup% | |
1777 | } | |
1778 | % \end{macrocode} | |
1779 | % | |
1780 | % \end{macro} | |
1781 | % | |
1ffa9044 | 1782 | % \subsection{Enumerated lists} |
1783 | % | |
1784 | % We busily redefine all the counters for enumerated lists, and how to | |
1785 | % typeset them. | |
1786 | % | |
1787 | % How to typeset the numbers: | |
1788 | % | |
1789 | % \begin{macrocode} | |
1790 | \renewcommand\theenumi{\arabic{enumi}} | |
1791 | \renewcommand\theenumii{\alph{enumii}} | |
1792 | \renewcommand\theenumiii{\roman{enumiii}} | |
1793 | \renewcommand\theenumiv{\Alph{enumiv}} | |
1794 | % \end{macrocode} | |
1795 | % | |
1796 | % Typesetting the item labels: | |
1797 | % | |
1798 | % \begin{macrocode} | |
1799 | \newcommand\labelenumi{\theenumi.} | |
1800 | \newcommand\labelenumii{(\theenumii)} | |
1801 | \newcommand\labelenumiii{\theenumiii.} | |
1802 | \newcommand\labelenumiv{\theenumiv.} | |
1803 | % \end{macrocode} | |
1804 | % | |
1805 | % And finally how to typeset references to the items: | |
1806 | % | |
1807 | % \begin{macrocode} | |
1808 | \renewcommand\p@enumii{\theenumi} | |
1809 | \renewcommand\p@enumiii{\theenumi(\theenumii)} | |
1810 | \renewcommand\p@enumiv{\p@enumiii\theenumiii} | |
1811 | % \end{macrocode} | |
1812 | % | |
1813 | % \subsection{Itemized lists} | |
1814 | % | |
1815 | % We set up the various bullet shapes for the itemized lists. | |
1816 | % | |
1817 | % \begin{macrocode} | |
1818 | \newcommand\labelitemi{$\m@th\bullet$} | |
1819 | \newcommand\labelitemii{\normalfont\bfseries --} | |
1820 | \newcommand\labelitemiii{$\m@th\ast$} | |
1821 | \newcommand\labelitemiv{$\m@th\cdot$} | |
1822 | % \end{macrocode} | |
1823 | % | |
1824 | % \subsection{Description lists} | |
1825 | % | |
1826 | % This has been redefined a little to make it more sensible. The old version | |
1827 | % had a weird |\hspace\labelsep| in the labelling macro. This has now been | |
1828 | % added into the main list definition. You can now redefine | |
1829 | % |\descriptionlabel| without fear of messing up the spacing. | |
1830 | % | |
1831 | % \begin{environment}{description} | |
1832 | % | |
1833 | % Here we set up the main list parameters. The label width is zeroed to | |
1834 | % ensure that the text is always indented nicely. | |
1835 | % | |
1836 | % \begin{macrocode} | |
1837 | \def\description{% | |
1838 | \list{}{% | |
1839 | \labelwidth\z@% | |
1840 | \itemindent-\leftmargin% | |
1841 | \advance\itemindent\labelsep% | |
1842 | \def\makelabel{\descriptionlabel}% | |
1843 | }% | |
1844 | } | |
1845 | \let\enddescription\endlist | |
1846 | % \end{macrocode} | |
1847 | % | |
1848 | % \begin{macro}{\descriptionlabel} | |
1849 | % | |
1850 | % This typesets a description label. Redefine it the obvious way for | |
1851 | % different exciting effects. | |
1852 | % | |
1853 | % \begin{macrocode} | |
1854 | \def\descriptionlabel#1{\normalfont\bfseries #1} | |
1855 | % \end{macrocode} | |
1856 | % | |
1857 | % \end{macro} | |
1858 | % \end{environment} | |
1859 | % | |
1860 | % \subsection{Other list-based environments} | |
1861 | % | |
1862 | % Several other standard environments are defined in terms of lists. These | |
1863 | % are all dealt with here. | |
1864 | % | |
1865 | % \begin{environment}{verse} | |
1866 | % | |
1867 | % The \env{verse} environment is specially fiddled so that |\\| works as it | |
1868 | % should. There's nothing else exciting about it. | |
1869 | % | |
1870 | % \begin{macrocode} | |
1871 | \newenvironment{verse}{% | |
1872 | \let\\\@centercr% | |
1873 | \list{}{% | |
1874 | \itemsep\z@% | |
1875 | \itemindent-1.5em% | |
1876 | \listparindent\itemindent% | |
1877 | \rightmargin\leftmargin% | |
1878 | \advance\leftmargin1.5em% | |
1879 | }% | |
1880 | \item[]% | |
1881 | }{% | |
1882 | \endlist% | |
1883 | } | |
1884 | % \end{macrocode} | |
1885 | % \end{environment} | |
1886 | % | |
1887 | % \begin{environment}{quotation} | |
1888 | % | |
1889 | % The \env{quotation} environment is a pretty standard display, except that | |
1890 | % we kill off inter-paragraph space. The current definition means that | |
1891 | % \env{quotation}s are typeset in normal indented-paragraph style, which | |
1892 | % is inconsistent with the rest of the document style. | |
1893 | % | |
1894 | % \begin{macrocode} | |
1895 | \newenvironment{quotation}{% | |
1896 | \list{}{% | |
1897 | \listparindent\z@% | |
1898 | \itemindent\listparindent% | |
1899 | \rightmargin\leftmargin% | |
1900 | }% | |
1901 | \item[]% | |
1902 | }{% | |
1903 | \endlist% | |
1904 | } | |
1905 | % \end{macrocode} | |
1906 | % \end{environment} | |
1907 | % | |
1908 | % \begin{environment}{quote} | |
1909 | % | |
1910 | % This is even simpler. We just pull in the right margin a bit. | |
1911 | % | |
1912 | % \begin{macrocode} | |
1913 | \newenvironment{quote}{% | |
1914 | \list{}{% | |
1915 | \rightmargin\leftmargin% | |
1916 | }% | |
1917 | \item[]% | |
1918 | }{% | |
1919 | \endlist% | |
1920 | } | |
1921 | % \end{macrocode} | |
1922 | % \end{environment} | |
1923 | % | |
1924 | % \begin{environment}{display} | |
1925 | % | |
1926 | % The \env{display} environment is intended for any other displays which you | |
1927 | % need to typeset. This is \emph{not} a standard environment. | |
1928 | % | |
1929 | % \begin{macrocode} | |
1930 | \newenvironment{display}{% | |
1931 | \list{}{% | |
1932 | \leftmargin1em% | |
1933 | \rightmargin\leftmargin% | |
1934 | \labelsep\z@% | |
1935 | \labelwidth\z@% | |
1936 | }% | |
1937 | \item[]\relax% | |
1938 | }{% | |
1939 | \endlist% | |
1940 | } | |
1941 | % \end{macrocode} | |
1942 | % \end{environment} | |
1943 | % | |
1944 | % And some quick hacking of the theorem environment. | |
1945 | % | |
1946 | % \section{Other parameters} | |
1947 | % | |
1948 | % We define some miscellaneous parameters for standard environments. | |
1949 | % | |
1950 | % \begin{macrocode} | |
1951 | \arraycolsep5\p@ | |
1952 | \tabcolsep6\p@ | |
1953 | \arrayrulewidth.4\p@ | |
1954 | \doublerulesep2\p@ | |
1955 | \tabbingsep\labelsep | |
1956 | \skip\@mpfootins\skip\footins | |
1957 | \fboxsep3\p@ | |
1958 | \fboxrule.4\p@ | |
1959 | % | |
1960 | \if@article | |
1961 | \renewcommand\theequation{\arabic{equation}} | |
1962 | \else | |
1963 | \@addtoreset{equation}{chapter} | |
1964 | \renewcommand\theequation{\thechapter.\arabic{equation}} | |
1965 | \fi | |
1966 | % \end{macrocode} | |
1967 | % | |
1968 | % \section{Floats} | |
1969 | % | |
1970 | % Since raw \LaTeX\ doesn't actually define any floating objects, we have | |
1971 | % to do some of the work here. This isn't actually terribly arduous. For | |
1972 | % a float called \synt{float}, we have to define the following macros: | |
1973 | % | |
1974 | % \begin{description} | |
1975 | % \let\descriptionlabel\relax | |
1976 | % | |
1977 | % \item[\texttt{\bslash fps@}\synt{float}] is the default float positioning | |
1978 | % argument for the float type. | |
1979 | % | |
1980 | % \item[\texttt{\bslash ftype@}\synt{float}] is a flag bit for the float | |
1981 | % type. This is used in \LaTeX's |\output| routine to identify floats of | |
1982 | % this type. | |
1983 | % | |
1984 | % \item[\texttt{\bslash ext@}\synt{float}] is the file extension for the | |
1985 | % list of these floats (e.g., \lit{lof} for figures). | |
1986 | % | |
1987 | % \item[\texttt{\bslash fnum@}\synt{float}] is a macro which generates the | |
1988 | % caption number. For figures, this expands to `|Figure~\thefigure|'. | |
1989 | % | |
1990 | % \end{description} | |
1991 | % | |
1992 | % We must also define |\@makecaption|, which typesets a float caption in | |
1993 | % an appropriate way, and an environment for each type of float. | |
1994 | % | |
1995 | % \subsection{Figures} | |
1996 | % | |
1997 | % This is all fairly straightforward stuff. First, we create a counter for | |
1998 | % figures: | |
1999 | % | |
2000 | % \begin{macrocode} | |
2001 | \newcounter{figure}[chapter] | |
2002 | \if@article | |
2003 | \renewcommand\thefigure{\@arabic\c@figure} | |
2004 | \else | |
2005 | \renewcommand\thefigure{\thechapter.\@arabic\c@figure} | |
2006 | \fi | |
2007 | % \end{macrocode} | |
2008 | % | |
2009 | % Now we define all the macros \LaTeX\ requires. | |
2010 | % | |
2011 | % \begin{macrocode} | |
2012 | \if@herefloats\def\fps@figure{htbp}\else\def\fps@figure{tbp}\fi | |
2013 | \def\ftype@figure{1} | |
2014 | \def\ext@figure{lof} | |
2015 | \def\fnum@figure{\figurename~\thefigure} | |
2016 | % \end{macrocode} | |
2017 | % | |
2018 | % \begin{environment}{figure} | |
2019 | % \begin{environment}{figure*} | |
2020 | % | |
2021 | % Finally, we create the \env{figure} and \env{figure$*$} environments. | |
2022 | % | |
2023 | % \begin{macrocode} | |
2024 | \newenvironment{figure}{\@float{figure}}{\end@float} | |
2025 | \newenvironment{figure*}{\@dblfloat{figure}}{\end@dblfloat} | |
2026 | % \end{macrocode} | |
2027 | % \end{environment} | |
2028 | % \end{environment} | |
2029 | % | |
2030 | % \subsection{Tables} | |
2031 | % | |
2032 | % This is pretty similar to the figure handling. | |
2033 | % | |
2034 | % \begin{macrocode} | |
2035 | \newcounter{table}[chapter] | |
2036 | \if@article | |
2037 | \renewcommand\thetable{\@arabic\c@table} | |
2038 | \else | |
2039 | \renewcommand\thetable{\thechapter.\@arabic\c@table} | |
2040 | \fi | |
2041 | % | |
2042 | \if@herefloats\def\fps@table{htbp}\else\def\fps@table{tbp}\fi | |
2043 | \def\ftype@table{2} | |
2044 | \def\ext@table{lot} | |
2045 | \def\fnum@table{\tablename~\thetable} | |
2046 | % | |
2047 | \newenvironment{table}{\@float{table}}{\end@float} | |
2048 | \newenvironment{table*}{\@dblfloat{table}}{\end@dblfloat} | |
2049 | % \end{macrocode} | |
2050 | % | |
2051 | % \subsection{Other float parameters} | |
2052 | % | |
2053 | % \begin{macro}{\@makecaption} | |
2054 | % | |
2055 | % The |\@makecaption| macro is called to display a float caption. It will | |
2056 | % typeset its argument either centred in a box, if it is short enough, or | |
2057 | % in a paragraph if it is longer than a line. | |
2058 | % | |
2059 | % \begin{macrocode} | |
2060 | \newlength\abovecaptionskip | |
2061 | \newlength\belowcaptionskip | |
2062 | \abovecaptionskip10\p@ | |
2063 | \belowcaptionskip0\p@ | |
2064 | % | |
c3f26ad3 | 2065 | \long\def\captionstyle#1#2{\itshape #1: #2} |
1ffa9044 | 2066 | \long\def\@makecaption#1#2{% |
2067 | \vskip\abovecaptionskip% | |
c3f26ad3 | 2068 | \sbox\@tempboxa{\captionstyle{#1}{#2}}% |
1ffa9044 | 2069 | \ifdim\wd\@tempboxa>\hsize% |
c3f26ad3 | 2070 | \unhbox\@tempboxa\par% |
1ffa9044 | 2071 | \else% |
c3f26ad3 | 2072 | \hb@xt@\hsize{\hfil\unhbox\@tempboxa\hfil}% |
1ffa9044 | 2073 | \fi% |
2074 | \vskip\belowcaptionskip% | |
2075 | } | |
2076 | % \end{macrocode} | |
2077 | % \end{macro} | |
2078 | % | |
2079 | % \section{Font commands} | |
2080 | % | |
2081 | % We allow the `old' font commands to do sensible \textsf{NFSS} things, since | |
2082 | % we don't have any legacy documents. This means that we have proper | |
2083 | % abbreviations for font changes. We also add |\nm| to return to a normal | |
2084 | % font, whatever that may mean. | |
2085 | % | |
2086 | % \begin{macrocode} | |
2087 | \DeclareOldFontCommand{\rm}{\rmfamily}{\mathrm} | |
2088 | \DeclareOldFontCommand{\sf}{\sffamily}{\mathsf} | |
2089 | \DeclareOldFontCommand{\tt}{\ttfamily}{\mathtt} | |
2090 | \DeclareOldFontCommand{\bf}{\bfseries}{\mathbf} | |
2091 | \DeclareOldFontCommand{\md}{\mdseries}{\@nomath\md} | |
2092 | \DeclareOldFontCommand{\it}{\itshape}{\mathit} | |
2093 | \DeclareOldFontCommand{\up}{\upshape}{\@nomath\up} | |
2094 | \DeclareOldFontCommand{\sl}{\slshape}{\@nomath\sl} | |
2095 | \DeclareOldFontCommand{\sc}{\scshape}{\@nomath\sc} | |
2096 | \DeclareOldFontCommand{\nm}{\normalfont}{\mathnormal} | |
2097 | % \end{macrocode} | |
2098 | % | |
2099 | % Now we define some special commands which only work in maths mode. It | |
2100 | % seems that older versions of \LaTeX\ (in particular, that at Warwick | |
2101 | % University) don't define these commands initially, so we'd better not | |
2102 | % use |\renewcommand| after all. We also dispose of lots of messing with | |
2103 | % |\protect| by using |\DeclareRobustCommand|. | |
2104 | % | |
2105 | % \begin{macrocode} | |
2106 | \DeclareRobustCommand\cal{\@fontswitch{\relax}{\mathcal}} | |
2107 | \DeclareRobustCommand\pmit{\@fontswitch{\relax}{\mathnormal}} | |
2108 | % \end{macrocode} | |
2109 | % | |
2110 | % \section{Tables of contents} | |
2111 | % | |
2112 | % This section deals with tables of contents, and lists of figures. | |
2113 | % | |
2114 | % \subsection{Contents} | |
2115 | % | |
2116 | % First, we have to define some parameters. | |
2117 | % | |
2118 | % \begin{macrocode} | |
2119 | \newcommand\@pnumwidth{2em} | |
2120 | \newcommand\@tocrmarg {3em} | |
2121 | \newcommand\@dotsep{4.5} | |
2122 | \setcounter{tocdepth}{\if@runinsubsubsec1\else2\fi} | |
2123 | % \end{macrocode} | |
2124 | % | |
2125 | % \begin{macro}{\tableofcontents} | |
2126 | % | |
2127 | % This is the main command for setting up tables of contents. We ensure | |
2128 | % a single-page layout, put in the chapter heading, read in the contents | |
2129 | % file, and then restore the old layout. | |
2130 | % | |
2131 | % \begin{macrocode} | |
c3f26ad3 | 2132 | \def\@tocthing#1#2{% |
2133 | \@ifnextchar[{\@tocthing@i{#1}{#2}}{\@tocthing@i{#1}{#2}[\relax][\relax]}% | |
2134 | } | |
2135 | \def\@tocthing@i#1#2[#3][#4]{% | |
2136 | \if@twocolumn\@restonecoltrue\onecolumn\else\@restonecolfalse\fi% | |
2137 | \@topsect@star{#1}#3{\parskip\z@\@starttoc{#2}}#4% | |
2138 | \if@restonecol\twocolumn\fi% | |
1ffa9044 | 2139 | } |
c3f26ad3 | 2140 | \newcommand\tableofcontents{\@tocthing\contentsname{toc}} |
1ffa9044 | 2141 | % \end{macrocode} |
2142 | % \end{macro} | |
2143 | % | |
2144 | % Each section type \synt{type} is typeset by a command |\l@|\synt{type}: | |
2145 | % for example, the |\l@chapter| command typesets the entry for a chapter | |
2146 | % heading. | |
2147 | % | |
2148 | % \begin{macro}{\l@part} | |
2149 | % | |
2150 | % This command is vaguely interesting. We'll explore in detail. | |
2151 | % | |
2152 | % \begin{macrocode} | |
2153 | \def\l@part#1#2{% | |
2154 | % \end{macrocode} | |
2155 | % | |
2156 | % We don't typeset the entry if |tocdepth| tells us not to. What kind of | |
2157 | % stupid user is going to disable \emph{all} the contents items. | |
2158 | % | |
2159 | % \begin{macrocode} | |
2160 | \ifnum\c@tocdepth>-2\relax% | |
2161 | % \end{macrocode} | |
2162 | % | |
2163 | % Before we start, we try to break above the title. Later, we'll disable | |
2164 | % breaking afterwards. We then leave some vertical space. | |
2165 | % | |
2166 | % \begin{macrocode} | |
2167 | \addpenalty{-\@highpenalty}% | |
2168 | \addvspace{2.25em\@plus\p@}% | |
2169 | % \end{macrocode} | |
2170 | % | |
2171 | % We open a group, to avoid messing other things up. The |\numberline| | |
2172 | % macro, which numbers the entry on the left, typesets its argument in a box | |
2173 | % of width |\@tempdima|, which we must set up. We then set up the values | |
2174 | % of |\rightskip| and |\parfillskip| to avoid printing over the page number. | |
2175 | % We also make |\interlinepenalty| infinite to suppress breaking pages in | |
2176 | % the middle of the title. | |
2177 | % | |
2178 | % \begin{macrocode} | |
2179 | \begingroup% | |
2180 | \@tempdima3em% | |
2181 | \parindent\z@% | |
2182 | \rightskip\@pnumwidth% | |
2183 | \parfillskip-\@pnumwidth% | |
2184 | \interlinepenalty\@M | |
2185 | % \end{macrocode} | |
2186 | % | |
2187 | % Time to typeset the actual title. This is fairly simple, apart from | |
2188 | % a complicated mixture of glue and penalties, which handles a line break | |
2189 | % right at the end of the title. | |
2190 | % | |
2191 | % \begin{macrocode} | |
2192 | {% | |
2193 | \leavevmode% | |
2194 | \large\bfseries {#1}% | |
2195 | \nobreak\hfil\penalty\@highpenalty\hbox{}\nobreak\hfil% | |
2196 | \hb@xt@\@pnumwidth{\hss #2}% | |
2197 | }% | |
2198 | % \end{macrocode} | |
2199 | % | |
2200 | % Now we end the paragraph and suppress page breaking here. | |
2201 | % | |
2202 | % \begin{macrocode} | |
2203 | \par% | |
2204 | \nobreak% | |
2205 | \global\@nobreaktrue% | |
2206 | \everypar{\global\@nobreakfalse\everypar{}}% | |
2207 | \endgroup% | |
2208 | \fi% | |
2209 | } | |
2210 | % \end{macrocode} | |
2211 | % \end{macro} | |
2212 | % | |
2213 | % \begin{macro}{\@artsw} | |
2214 | % | |
2215 | % Define a macro named after the first or second argument depending on | |
2216 | % whether the document is an article. | |
2217 | % | |
2218 | % \begin{macrocode} | |
2219 | \def\@artsw#1#2#3{% | |
2220 | \edef\@tempa{#1\if@article\noexpand#3\else\noexpand#2\fi}% | |
2221 | \@tempa% | |
2222 | } | |
2223 | % \end{macrocode} | |
2224 | % | |
2225 | % \end{macro} | |
2226 | % | |
2227 | % \begin{macro}{\l@chapter} | |
2228 | % | |
2229 | % This is terribly similar to the previous macro. | |
2230 | % | |
2231 | % \begin{macrocode} | |
2232 | \@artsw\def\l@chapter\l@section#1#2{% | |
2233 | \ifnum\c@tocdepth >\m@ne% | |
2234 | \addpenalty{-\@highpenalty}% | |
2235 | \vskip1.0em\@plus\p@% | |
2236 | \setlength\@tempdima{2em}% | |
2237 | \begingroup% | |
2238 | \interlinepenalty\@M | |
2239 | \parindent\z@% | |
2240 | \rightskip\@pnumwidth% | |
2241 | \parfillskip-\@pnumwidth% | |
2242 | \leavevmode% | |
2243 | \bfseries% | |
2244 | \advance\leftskip\@tempdima% | |
2245 | \hskip-\leftskip% | |
2246 | {#1}% | |
2247 | \nobreak\hfil\penalty\@highpenalty\hbox{}\nobreak\hfil% | |
2248 | \hb@xt@\@pnumwidth{\hss #2}% | |
2249 | \par% | |
2250 | \penalty\@highpenalty% | |
2251 | \endgroup% | |
2252 | \fi% | |
2253 | } | |
2254 | % \end{macrocode} | |
2255 | % \end{macro} | |
2256 | % | |
2257 | % The other types are all defined in terms of |\@dottedtocline|, which is | |
2258 | % redefined beloew. | |
2259 | % | |
2260 | % \begin{macrocode} | |
2261 | \@artsw\def\l@section\l@subsection{\@dottedtocline{1}{2em}{2.5em}} | |
2262 | \@artsw\def\l@subsection\l@subsubsection{\@dottedtocline{2}{4.5em}{3.2em}} | |
2263 | \@artsw\def\l@subsubsection\l@paragraph{\@dottedtocline{3}{7.7em}{4.1em}} | |
2264 | \@artsw\def\l@paragraph\l@subparagraph{\@dottedtocline{4}{10.5em}{5em}} | |
2265 | \@artsw\def\l@subparagraph\@tempa{\@dottedtocline{5}{12.5em}{6em}} | |
2266 | % \end{macrocode} | |
2267 | % | |
2268 | % \begin{macro}{\@dottedtocline} | |
2269 | % | |
2270 | % This is actually a part of the \LaTeX\ kernel, although it's not quite | |
fddb126a | 2271 | % right the way it is. We've improved the handling of line breaks after the |
1ffa9044 | 2272 | % title. |
2273 | % | |
2274 | % \begin{macrocode} | |
2275 | \def\@dottedtocline#1#2#3#4#5{% | |
2276 | % \end{macrocode} | |
2277 | % | |
2278 | % We have to make sure that we're meant to typeset this contents entry. | |
2279 | % | |
2280 | % \begin{macrocode} | |
2281 | \ifnum#1>\c@tocdepth\else% | |
2282 | % \end{macrocode} | |
2283 | % | |
2284 | % Now we add in a little stretchy space. | |
2285 | % | |
2286 | % \begin{macrocode} | |
2287 | \vskip\z@\@plus.2\p@% | |
2288 | % \end{macrocode} | |
2289 | % | |
2290 | % Set up the paragraph layout now. We forbid page breaks in the middle of | |
2291 | % the title. | |
2292 | % | |
2293 | % \begin{macrocode} | |
2294 | {% | |
2295 | \leftskip#2\relax% | |
2296 | \rightskip\@tocrmarg% | |
2297 | \parfillskip-\rightskip% | |
2298 | \parindent#2\relax% | |
2299 | \@afterindenttrue% | |
2300 | \interlinepenalty\@M% | |
2301 | % \end{macrocode} | |
2302 | % | |
2303 | % Now we typeset the actual title. | |
2304 | % | |
2305 | % \begin{macrocode} | |
2306 | \leavevmode% | |
2307 | \@tempdima#3\relax% | |
2308 | \advance\leftskip\@tempdima% | |
2309 | \hbox{}% | |
2310 | \hskip-\leftskip% | |
2311 | {#4}% | |
2312 | % \end{macrocode} | |
2313 | % | |
2314 | % This is the clever bit. After the actual title, we add the following | |
2315 | % items: | |
2316 | % | |
2317 | % \begin{itemize} | |
2318 | % | |
2319 | % \item A |\nobreak| penalty, to stop a break from eating the glue. | |
2320 | % | |
2321 | % \item A glob of |\hfil| glue. If there's a line break after this glue, | |
2322 | % the title is set flush left as a result of this. Otherwise, it is ignored | |
2323 | % because the leaders are |\hfill|. | |
2324 | % | |
2325 | % \item A penalty. This is a reasonable place to break the line if | |
2326 | % necessary. | |
2327 | % | |
2328 | % \item An empty |\hbox|. This stops the following glue from being discarded | |
2329 | % at the beginning of a new line. | |
2330 | % | |
2331 | % \item Another |\nobreak|, which stops a break at the following glue item. | |
2332 | % | |
2333 | % \item The dotted |\leaders|, which have |\hfill| stretchiness. This forces | |
2334 | % the page number to be flush right. | |
2335 | % | |
2336 | % \end{itemize} | |
2337 | % | |
2338 | % The net result of all this is we can now cope with a line break at the | |
2339 | % end of the title, before the page number, which means that the dots are | |
2340 | % put on the next line. The original \LaTeX\ version forced the last word | |
2341 | % of the title onto the next line as well, which can cause underful boxes. | |
2342 | % | |
2343 | % \begin{macrocode} | |
2344 | \nobreak\hfil\penalty\@highpenalty\hbox{}\nobreak% | |
2345 | \leaders\hbox{$\m@th\mkern\@dotsep mu.\mkern\@dotsep mu$}\hfill% | |
2346 | \hb@xt@\@pnumwidth{\hfil\reset@font\rmfamily#5}\par% | |
2347 | }% | |
2348 | \fi% | |
2349 | } | |
2350 | % \end{macrocode} | |
2351 | % \end{macro} | |
2352 | % | |
2353 | % \subsection{Lists of figures and tables} | |
2354 | % | |
2355 | % These macros are terribly similar to the other ones. | |
2356 | % | |
2357 | % \begin{macrocode} | |
c3f26ad3 | 2358 | \newcommand\listoffigures{\@tocthing\listfigurename{lof}} |
2359 | \newcommand\l@figure{\@dottedtocline{0}{0pt}{2em}} | |
2360 | \newcommand\listoftables{\@tocthing\listtablename{lot}} | |
1ffa9044 | 2361 | \let\l@table\l@figure |
2362 | % \end{macrocode} | |
2363 | % | |
2364 | % \section{Bibliography} | |
2365 | % | |
2366 | % This isn't actually terribly interesting. | |
2367 | % | |
2368 | % \begin{environment}{thebibliography} | |
2369 | % | |
2370 | % \begin{macrocode} | |
2371 | \newdimen\bibindent | |
2372 | \bibindent1.5em | |
2373 | % | |
2374 | \newenvironment{thebibliography}[1]{% | |
2375 | \@topsect\bibname% | |
2376 | \list{\@biblabel{\arabic{enumiv}}}% | |
2377 | {\settowidth\labelwidth{\@biblabel{#1}}% | |
2378 | \leftmargin\labelwidth% | |
2379 | \advance\leftmargin\labelsep% | |
2380 | \if@openbib% | |
2381 | \advance\leftmargin\bibindent% | |
2382 | \itemindent-\bibindent% | |
2383 | \listparindent\itemindent% | |
2384 | \parsep\z@% | |
2385 | \fi% | |
2386 | \usecounter{enumiv}% | |
2387 | \let\p@enumiv\@empty% | |
2388 | \renewcommand\theenumiv{\arabic{enumiv}}}% | |
2389 | \if@openbib% | |
2390 | \renewcommand\newblock{\par}% | |
2391 | \else% | |
2392 | \renewcommand\newblock{\hskip.11em\@plus.33em\@minus.07em}% | |
2393 | \fi% | |
2394 | \sloppy% | |
2395 | \clubpenalty4000% | |
2396 | \widowpenalty4000% | |
2397 | \sfcode`\.\@m% | |
2398 | }{% | |
2399 | \def\@noitemerr{\@latex@warning{Empty `thebibliography' environment}}% | |
2400 | \endlist% | |
2401 | } | |
2402 | % | |
2403 | \newcommand\newblock{} | |
2404 | % \end{macrocode} | |
2405 | % \end{environment} | |
2406 | % | |
2407 | % \section{Index} | |
2408 | % | |
2409 | % Defines the \env{theindex} environment. | |
2410 | % | |
2411 | % \begin{environment}{theindex} | |
2412 | % | |
2413 | % The macros are fairly simple. We change to a two column layout, and | |
2414 | % redefine |\item| appropriately. | |
2415 | % | |
2416 | % \begin{macrocode} | |
2417 | \newenvironment{theindex}{% | |
2418 | \columnseprule\z@% | |
2419 | \columnsep35\p@% | |
2420 | \@topsect\indexname% | |
2421 | \if@twocolumn\else% | |
2422 | \begin{multicols}{2}% | |
2423 | \fi% | |
2424 | \parskip\z@\@plus.3\p@\relax% | |
2425 | \raggedright% | |
2426 | \let\item\@idxitem% | |
2427 | }{% | |
2428 | \if@twocolumn\else% | |
2429 | \end{multicols}% | |
2430 | \fi% | |
2431 | } | |
2432 | % \end{macrocode} | |
2433 | % \end{environment} | |
2434 | % | |
2435 | % Now we define the item and spacing macros. | |
2436 | % | |
2437 | % \begin{macrocode} | |
2438 | \newcommand\@idxitem {\par\hangindent 40\p@} | |
2439 | \newcommand\subitem {\par\hangindent 40\p@ \hspace*{20\p@}} | |
2440 | \newcommand\subsubitem{\par\hangindent 40\p@ \hspace*{30\p@}} | |
2441 | \newcommand\indexspace{\par \vskip 10\p@ \@plus5\p@ \@minus3\p@\relax} | |
2442 | % \end{macrocode} | |
2443 | % | |
2444 | % \begin{macro}{\passim} | |
2445 | % | |
2446 | % The |passim| encapsulator is used to typeset the word `\textit{passim}' | |
2447 | % after a page range. | |
fddb126a | 2448 | % |
1ffa9044 | 2449 | % \begin{macrocode} |
2450 | \def\passim#1{#1 \textit{passim}} % Passim encapsulator for indices | |
2451 | % \end{macrocode} | |
2452 | % \end{macro} | |
2453 | % | |
2454 | % Other useful commands for indexing: | |
2455 | % | |
2456 | % \begin{description*} | |
2457 | % \def\descriptionlabel#1{\ttfamily \bslash #1} | |
2458 | % | |
2459 | % \item[Term] typesets its argument in italics, and adds it to the index. | |
2460 | % | |
2461 | % \item[term] typesets its first argument in italics, and adds its second | |
2462 | % to the index. | |
2463 | % | |
2464 | % \item[Index] typesets its argument normally, and adds it to the index. | |
2465 | % | |
2466 | % \end{description*} | |
2467 | % | |
2468 | % \begin{macrocode} | |
2469 | \def\Term#1{\emph{#1}\index{#1}} | |
2470 | \def\term#1{\emph{#1}\index} | |
2471 | \def\Index#1{#1\index{#1}} | |
2472 | % \end{macrocode} | |
2473 | % | |
2474 | % \section{Footnotes} | |
2475 | % | |
2476 | % \begin{macro}{\footnoterule} | |
2477 | % | |
2478 | % This macro typesets the rule above footnotes. This is a bit more complex | |
2479 | % than the default: we try and typeset the rule to be at most 1\,in wide, | |
2480 | % although if the column isn't wide enough, we use $4\over10$~of the | |
2481 | % box width instead. | |
2482 | % | |
2483 | % \begin{macrocode} | |
2484 | \def\footnoterule{% | |
2485 | \@tempdima.4\columnwidth% | |
2486 | \ifdim\@tempdima>1in\relax% | |
2487 | \@tempdima1in\relax% | |
2488 | \fi% | |
2489 | \kern-3\p@% | |
2490 | \hrule\@width\@tempdima% | |
2491 | \kern2.6\p@% | |
2492 | } | |
2493 | % \end{macrocode} | |
2494 | % \end{macro} | |
2495 | % | |
2496 | % We number footnotes within chapters: | |
2497 | % | |
2498 | % \begin{macrocode} | |
2499 | \@addtoreset{footnote}{chapter} | |
2500 | % \end{macrocode} | |
2501 | % | |
2502 | % \begin{macro}{\@makefntext} | |
2503 | % | |
2504 | % This is the macro which actually typesets a footnote. This is rather | |
2505 | % complicated. It's based on example code from \file{classes.dtx} which | |
2506 | % doesn't actually work properly. | |
2507 | % | |
2508 | % \begin{macrocode} | |
2509 | \long\def\@makefntext#1{% | |
2510 | % \end{macrocode} | |
2511 | % | |
2512 | % First, we redefine |\par| to set up the correct paragraph shape. This | |
2513 | % is indented from the left margin by a small amount. | |
2514 | % | |
2515 | % \begin{macrocode} | |
2516 | \@setpar{% | |
2517 | \@@par% | |
2518 | \@tempdima\hsize% | |
2519 | \advance\@tempdima-1.6em% | |
2520 | \parshape\@ne1.6em\@tempdima% | |
2521 | }% | |
2522 | % \end{macrocode} | |
2523 | % | |
2524 | % Now we set up some parameters so that \env{list} environments work properly | |
2525 | % within the footnote. We also clear |\parindent| to prevent nasty | |
2526 | % indentation. The |\par| sets up the paragraph shape for the next | |
2527 | % paragraph: we're in vertical mode already, so it does nothing else. | |
2528 | % | |
2529 | % \begin{macrocode} | |
2530 | \advance\linewidth-1.6em% | |
2531 | \advance\@totalleftmargin1.6em% | |
2532 | \par% | |
2533 | \parindent\z@% | |
2534 | % \end{macrocode} | |
2535 | % | |
2536 | % We leave vertical mode to stop the hbox created by |\llap| from being | |
2537 | % stacked vertically. Then we typeset the footnote mark, and put in the | |
2538 | % main text. Finally we leave some space afterwards, to space out the next | |
2539 | % footnote. | |
2540 | % | |
2541 | % \begin{macrocode} | |
2542 | \leavevmode% | |
2543 | \llap{\@makefnmark\enspace}#1\par% | |
2544 | \vskip\parskip% | |
2545 | } | |
2546 | % \end{macrocode} | |
2547 | % \end{macro} | |
2548 | % | |
2549 | % \begin{macro}{\@makecol} | |
2550 | % | |
2551 | % The standard \LaTeX\ output routine messes up footnotes a bit, in my | |
2552 | % opinion: | |
2553 | % \begin{itemize} | |
2554 | % | |
2555 | % \item If a page is cut off short, because the next item won't fit (e.g., | |
2556 | % a section heading), then footnotes are added right below the end | |
2557 | % of the text, which can look strange. | |
2558 | % | |
2559 | % \item Footnotes are displayed \emph{above} floats at the bottom of a page, | |
2560 | % which also looks strange. | |
2561 | % | |
2562 | % \item The |\@makefntext| routine above needs to add vertical space between | |
2563 | % footnotes, but this leaves a gap at the very bottom. We remove this | |
2564 | % gap with an |\unskip|. | |
2565 | % | |
2566 | % \end{itemize} | |
2567 | % | |
2568 | % \begin{macrocode} | |
2569 | \def\@makecol{% | |
2570 | \setbox\@outputbox \box\@cclv | |
2571 | \xdef\@freelist{\@freelist\@midlist}% | |
2572 | \global \let \@midlist \@empty | |
2573 | \@combinefloats | |
2574 | \ifvoid\footins \else | |
2575 | \setbox\@outputbox \vbox {% | |
fddb126a | 2576 | \boxmaxdepth \@maxdepth |
1ffa9044 | 2577 | \unvbox \@outputbox |
2578 | \vskip \skip\footins | |
2579 | \vfil | |
2580 | \footnoterule | |
2581 | \unvbox \footins | |
2582 | \unskip | |
2583 | }% | |
2584 | \fi | |
2585 | \ifvbox\@kludgeins | |
2586 | \@makespecialcolbox | |
2587 | \else | |
2588 | \setbox\@outputbox \vbox to\@colht {% | |
2589 | \@texttop | |
2590 | \dimen@ \dp\@outputbox | |
2591 | \unvbox \@outputbox | |
2592 | \vskip -\dimen@ | |
2593 | \@textbottom | |
2594 | }% | |
2595 | \fi | |
2596 | \global \maxdepth \@maxdepth | |
2597 | } | |
2598 | % \end{macrocode} | |
2599 | % \end{macro} | |
2600 | % | |
2601 | % \section{Tidying up} | |
2602 | % | |
2603 | % This section gathers together various other useful bits of standard | |
2604 | % document class setting. | |
2605 | % | |
2606 | % \subsection{Item names} | |
2607 | % | |
2608 | % These commands typeset bits of text. They can then be redefined by | |
2609 | % \package{babel} and suchlike. | |
2610 | % | |
2611 | % \begin{macrocode} | |
2612 | \newcommand\contentsname{Contents} | |
c3f26ad3 | 2613 | \newcommand\listfigurename{List of figures} |
2614 | \newcommand\listtablename{List of tables} | |
1ffa9044 | 2615 | \if@article\newcommand\bibname{References} |
2616 | \else\newcommand\bibname{Bibliography}\fi | |
2617 | \newcommand\indexname{Index} | |
2618 | \newcommand\figurename{Figure} | |
2619 | \newcommand\tablename{Table} | |
2620 | \newcommand\partname{Part} | |
2621 | \newcommand\abstractname{Abstract} | |
2622 | \newcommand\chaptername{Chapter} | |
2623 | \newcommand\appendixname{Appendix} | |
2624 | \newcommand\today{\number\day\space\ifcase\month\or | |
2625 | January\or February\or March\or April\or May\or June\or | |
2626 | July\or August\or September\or October\or November\or December\fi | |
2627 | \space\number\year} | |
2628 | % \end{macrocode} | |
2629 | % | |
2630 | % \subsection{Final fiddling for two columns} | |
2631 | % | |
2632 | % \begin{macrocode} | |
2633 | \columnsep10\p@ | |
2634 | \columnseprule\z@ | |
2635 | \pagestyle{headings} | |
2636 | \pagenumbering{arabic} % Arabic page numbers | |
2637 | \if@twocolumn | |
2638 | \twocolumn | |
2639 | \sloppy | |
2640 | \flushbottom | |
2641 | \else | |
2642 | \onecolumn | |
2643 | \fi | |
2644 | % \end{macrocode} | |
2645 | % | |
2646 | % \section{The \protect\env{central} environment} | |
2647 | % | |
2648 | % Because of the strange layout of the pages, text which is centred using | |
2649 | % normal \LaTeX\ commands is centred in the text area, not on the page, | |
2650 | % which is undesirable for large headings, like part headings. | |
2651 | % | |
2652 | % \begin{environment}{central} | |
2653 | % | |
2654 | % The \env{central} environment typesets its contents centrally on the page. | |
2655 | % It should only be used from outer vertical mode. | |
2656 | % | |
2657 | % The code just creates a box of the appropriate size and moves it into the | |
2658 | % right place. | |
2659 | % | |
2660 | % \begin{macrocode} | |
2661 | \newenvironment{central}{% | |
2662 | \par% | |
2663 | \vbox\bgroup\moveleft\leftindent\vbox\bgroup% | |
2664 | \textwidth\paperwidth% | |
2665 | \advance\textwidth-2\pagesurround\relax% | |
2666 | \hsize\textwidth% | |
2667 | \hrule\@height\z@\@depth\z@\@width\hsize% | |
2668 | }{% | |
2669 | \egroup% | |
2670 | \egroup% | |
2671 | } | |
2672 | % \end{macrocode} | |
2673 | % \end{environment} | |
2674 | % | |
2675 | % \section{Headers and footers} | |
2676 | % | |
2677 | % The \strayman\ class uses \package{fancyheadings} for its headers | |
2678 | % and footers. This has already been included in the preamble. We now | |
2679 | % need to fix a few problems with \package{fancyheadings} and set up some | |
2680 | % macros. | |
2681 | % | |
2682 | % \begin{macro}{\title} | |
2683 | % | |
2684 | % We extend |\title|, and give it an optional argument. It can now specify | |
2685 | % the document title as used by |\maketitle| and the running title for the | |
2686 | % header separately. | |
2687 | % | |
2688 | % We store the running header in the macro |\@headertitle|, which is | |
2689 | % initially empty. | |
2690 | % | |
2691 | % \begin{macrocode} | |
2692 | \def\@headertitle{} | |
2693 | % \end{macrocode} | |
2694 | % | |
2695 | % Now we define the |\title| macro, using |\@dblarg| to duplicate the | |
2696 | % mandatory argument if the optional one is omitted. | |
2697 | % | |
2698 | % \begin{macrocode} | |
2699 | \def\title{\@dblarg\title@i} | |
2700 | \def\title@i[#1]#2{% | |
2701 | \gdef\@title{#2}% | |
2702 | \gdef\@headertitle{#1}% | |
2703 | } | |
2704 | % \end{macrocode} | |
2705 | % \end{macro} | |
2706 | % | |
2707 | % \begin{macro}{\innerhead} | |
2708 | % \begin{macro}{\innerfoot} | |
2709 | % | |
2710 | % We allow the user to specify an `inner heading' which is displayed on the | |
2711 | % inside of the header on of each page. This can be used for security | |
2712 | % classifications, for example. Any \package{fancyheadings} commands can | |
2713 | % be used to control the header, which is expanded on each page. | |
2714 | % | |
2715 | % \begin{macrocode} | |
2716 | \def\l@innerhead{} | |
2717 | \def\r@innerhead{} | |
2718 | \def\l@innerfoot{} | |
2719 | \def\r@innerfoot{} | |
2720 | \def\innerhead{\@dblarg\innerhead@i} | |
2721 | \def\innerhead@i[#1]#2{% | |
2722 | \def\l@innerhead{#1}% | |
2723 | \def\r@innerhead{#2}% | |
2724 | } | |
2725 | \def\innerfoot{\@dblarg\innerfoot@i} | |
2726 | \def\innerfoot@i[#1]#2{% | |
2727 | \def\l@innerfoot{#1}% | |
2728 | \def\r@innerfoot{#2}% | |
2729 | } | |
2730 | % \end{macrocode} | |
2731 | % \end{macro} | |
2732 | % \end{macro} | |
2733 | % | |
2734 | % The next step is to set up the headings: | |
2735 | % | |
2736 | % \begin{macrocode} | |
2737 | \let\headrulewidth\z@ | |
2738 | \headwidth\textwidth | |
2739 | \advance\headwidth\leftindent | |
2713c178 | 2740 | \fancyhfoffset[LE,LO]{\leftindent} |
1ffa9044 | 2741 | \fancypagestyle{headings}{% |
2742 | \fancyhf{} | |
2743 | \fancyhead[LE]{\bfseries\@headertitle} | |
2744 | \if@article\fancyhead[RO]{\rightmark}\else\fancyhead[RO]{\leftmark}\fi | |
2745 | \fancyhead[RE]{\l@innerhead} \fancyhead[LO]{\r@innerhead} | |
2746 | \fancyfoot[RE]{\l@innerfoot} \fancyfoot[LO]{\r@innerfoot} | |
2747 | \fancyfoot[LE,RO]{\thepage} | |
2748 | } | |
2749 | \fancypagestyle{plain}{% | |
2750 | \fancyhf{}% | |
2751 | \fancyfoot[RE]{\l@innerfoot} \fancyfoot[LO]{\r@innerfoot} | |
2752 | \fancyfoot[LE,RO]{\thepage}% | |
2753 | } | |
2754 | \let\ps@fancy\ps@@fancy | |
2755 | % \end{macrocode} | |
2756 | % | |
2757 | % The \package{fancyheadings} package by default expects pages to be | |
2758 | % symmetrical. We have to redefine the |\ps@fancy| macro to make it | |
2759 | % work properly. | |
2760 | % | |
2761 | % \begin{macrocode} | |
2762 | \def\@lodd{\ifodd\c@page\hss\else\relax\fi} | |
2763 | \def\@rodd{\ifodd\c@page\relax\else\hss\fi} | |
2764 | % \end{macrocode} | |
2765 | % | |
2766 | % Finally, we can choose the page style we want: | |
2767 | % | |
2768 | % \begin{macrocode} | |
2769 | \pagestyle{headings} | |
2770 | % \end{macrocode} | |
2771 | % | |
2772 | % \section{Parbox alteration} | |
2773 | % | |
2774 | % The standard \LaTeX\ |\parbox| command, and the \env{minipage} environment, | |
2775 | % reset |\parskip| to zero, which is inconsistent with the document style. | |
2776 | % We amend |\@arrayparboxrestore|, the macro which sets up the paragraph | |
2777 | % style for parboxes. | |
2778 | % | |
2779 | % First, we define a macro explaining how the parbox should set the spacing. | |
2780 | % | |
2781 | % \begin{macrocode} | |
2782 | \def\parboxparskip{2ex} | |
2783 | % \end{macrocode} | |
2784 | % | |
2785 | % Next, we redefine the macro. This is taken directly from the \LaTeXe | |
2786 | % source. | |
2787 | % | |
2788 | % \begin{macrocode} | |
2789 | \def\@arrayparboxrestore{% | |
2790 | \let\par\@@par | |
2791 | \let\-\@dischyph | |
2792 | \let\'\@acci\let\`\@accii\let\=\@acciii | |
2793 | \parindent\z@ \parskip\z@ | |
2794 | \everypar{\parskip\parboxparskip\everypar{}}% | |
2795 | \linewidth\hsize | |
fddb126a | 2796 | \@totalleftmargin\z@ |
1ffa9044 | 2797 | \leftskip\z@skip \rightskip\z@skip \@rightskip\z@skip |
2798 | \parfillskip\@flushglue \lineskip\normallineskip | |
2799 | \baselineskip\normalbaselineskip | |
2800 | \@noskipsectrue% % The comp.text.tex gurus said it should be | |
2801 | \sloppy} | |
2802 | % \end{macrocode} | |
2803 | % | |
2804 | % | |
2805 | % \section{Other features} | |
2806 | % | |
2807 | % At the end is a miscellany of useful features. | |
2808 | % | |
2809 | % \subsection{Other typesetting conventions} | |
2810 | % | |
2811 | % Some items need typesetting in particular ways. | |
2812 | % | |
2813 | % \begin{macrocode} | |
2814 | \let\key\textit | |
2815 | \let\button\textbf | |
2816 | \def\submenu{\ensuremath\Rightarrow} | |
2817 | \let\name\relax | |
2818 | \def\file#1{\mbox{\itshape #1\/}} | |
2819 | % \end{macrocode} | |
2820 | % | |
2821 | % \subsection{And finally} | |
2822 | % | |
2823 | % \begin{macrocode} | |
2824 | \sloppy | |
2825 | \raggedbottom | |
2826 | \def\riscos{RISC~OS} | |
2827 | \hyphenpenalty1000 | |
2828 | %</strayman> | |
2829 | % \end{macrocode} | |
2830 | % | |
2831 | % \Finale | |
2832 | % | |
2833 | \endinput |