X-Git-Url: https://git.distorted.org.uk/~mdw/sgt/putty/blobdiff_plain/3392ac5da795d5908753f99d20ccbde4165acdcf..5462f4596108c4309fb69b4e57aa1e59d7100908:/doc/using.but diff --git a/doc/using.but b/doc/using.but index 99905c38..27a1c2a8 100644 --- a/doc/using.but +++ b/doc/using.but @@ -55,10 +55,14 @@ PuTTY will \I{selecting lines}select a whole line or sequence of lines. If you want to select a \I{rectangular selection}rectangular region instead of selecting to the end of each line, you can do this by -holding down Alt when you make your selection. (You can also +holding down Alt when you make your selection. You can also configure rectangular selection to be the default, and then holding -down Alt gives the normal behaviour instead. See -\k{config-rectselect} for details.) +down Alt gives the normal behaviour instead: see +\k{config-rectselect} for details. + +(In some Unix environments, Alt+drag is intercepted by the window +manager. Shift+Alt+drag should work for rectangular selection as +well, so you could try that instead.) If you have a \i{middle mouse button}, then you can use it to \I{adjusting a selection}adjust an existing selection if you @@ -362,11 +366,6 @@ point at display 10 or above on the SSH server machine itself: If this works, you should then be able to run X applications in the remote session and have them display their windows on your PC. -Note that if your PC X server requires \I{X11 authentication}authentication -to connect, then PuTTY cannot currently support it. If this is a problem for -you, you should mail the PuTTY authors \#{FIXME} and give details -(see \k{feedback}). - For more options relating to X11 forwarding, see \k{config-ssh-x11}. \H{using-port-forwarding} Using \i{port forwarding} in SSH @@ -423,15 +422,17 @@ number on the \e{server} (note that most servers will not allow you to use \I{privileged port}port numbers under 1024 for this purpose). An alternative way to forward local connections to remote hosts is -to use \I{dynamic port forwarding}dynamic SOCKS proxying. For -this, you will need to select the \q{Dynamic} radio button instead -of \q{Local}, and then you should not enter anything into the -\q{Destination} box (it will be ignored). This will cause PuTTY to -listen on the port you have specified, and provide a SOCKS proxy -service to any programs which connect to that port. So, in -particular, you can forward other PuTTY connections through it by -setting up the Proxy control panel (see \k{config-proxy} for -details). +to use \I{dynamic port forwarding}dynamic SOCKS proxying. In this +mode, PuTTY acts as a SOCKS server, which SOCKS-aware programs can +connect to and open forwarded connections to the destination of their +choice, so this can be an alternative to long lists of static +forwardings. To use this mode, you will need to select the \q{Dynamic} +radio button instead of \q{Local}, and then you should not enter +anything into the \q{Destination} box (it will be ignored). PuTTY will +then listen for SOCKS connections on the port you have specified. +Most \i{web browsers} can be configured to connect to this SOCKS proxy +service; also, you can forward other PuTTY connections through it by +setting up the Proxy control panel (see \k{config-proxy} for details). The source port for a forwarded connection usually does not accept connections from any machine except the \I{localhost}SSH client or @@ -470,6 +471,12 @@ to obtain a fix from Microsoft in order to use addresses like For more options relating to port forwarding, see \k{config-ssh-portfwd}. +If the connection you are forwarding over SSH is itself a second SSH +connection made by another copy of PuTTY, you might find the +\q{logical host name} configuration option useful to warn PuTTY of +which host key it should be expecting. See \k{config-loghost} for +details of this. + \H{using-rawprot} Making \i{raw TCP connections} A lot of \I{debugging Internet protocols}Internet protocols are @@ -540,9 +547,9 @@ window}, or a \i{Windows shortcut}). \S{using-cmdline-session} Starting a session from the command line -\I\c{-ssh}\I\c{-telnet}\I\c{-rlogin}\I\c{-raw}These options allow -you to bypass the configuration window and launch straight into a -session. +\I\c{-ssh}\I\c{-telnet}\I\c{-rlogin}\I\c{-raw}\I\c{-serial}These +options allow you to bypass the configuration window and launch +straight into a session. To start a connection to a server called \c{host}: @@ -555,10 +562,14 @@ default protocol (see \k{using-cmdline-protocol}). For telnet sessions, the following alternative syntax is supported (this makes PuTTY suitable for use as a URL handler for \i{telnet -URLs} in web browsers): +URLs} in \i{web browsers}): \c putty.exe telnet://host[:port]/ +To start a connection to a serial port, e.g. COM1: + +\c putty.exe -serial com1 + In order to start an existing saved session called \c{sessionname}, use the \c{-load} option (described in \k{using-cmdline-load}). @@ -608,7 +619,7 @@ must be the very first thing on the command line. This form of the option is deprecated.) \S2{using-cmdline-protocol} Selecting a protocol: \c{-ssh}, -\c{-telnet}, \c{-rlogin}, \c{-raw} +\c{-telnet}, \c{-rlogin}, \c{-raw} \c{-serial} To choose which protocol you want to connect with, you can use one of these options: @@ -621,6 +632,8 @@ of these options: \b \i\c{-raw} selects the raw protocol. +\b \i\c{-serial} selects a serial connection. + These options are not available in the file transfer tools PSCP and PSFTP (which only work with the SSH protocol). @@ -870,7 +883,8 @@ PuTTY configuration box (see \k{config-ssh-prot}). \i{Internet protocol version} The \c{-4} and \c{-6} options force PuTTY to use the older Internet -protocol \i{IPv4} or the newer \i{IPv6}. +protocol \i{IPv4} or the newer \i{IPv6} for most outgoing +connections. These options are equivalent to selecting your preferred Internet protocol version as \q{IPv4} or \q{IPv6} in the Connection panel of @@ -889,8 +903,42 @@ This option is equivalent to the \q{Private key file for authentication} box in the Auth panel of the PuTTY configuration box (see \k{config-ssh-privkey}). +\S2{using-cmdline-loghost} \i\c{-loghost}: specify a \i{logical host +name} + +This option overrides PuTTY's normal SSH host key caching policy by +telling it the name of the host you expect your connection to end up +at (in cases where this differs from the location PuTTY thinks it's +connecting to). It can be a plain host name, or a host name followed +by a colon and a port number. See \k{config-loghost} for more detail +on this. + \S2{using-cmdline-pgpfp} \i\c{-pgpfp}: display \i{PGP key fingerprint}s This option causes the PuTTY tools not to run as normal, but instead to display the fingerprints of the PuTTY PGP Master Keys, in order to aid with \i{verifying new versions}. See \k{pgpkeys} for more information. + +\S2{using-cmdline-sercfg} \i\c{-sercfg}: specify serial port +\i{configuration} + +This option specifies the configuration parameters for the serial +port (baud rate, stop bits etc). Its argument is interpreted as a +comma-separated list of configuration options, which can be as +follows: + +\b Any single digit from 5 to 9 sets the number of data bits. + +\b \cq{1}, \cq{1.5} or \cq{2} sets the number of stop bits. + +\b Any other numeric string is interpreted as a baud rate. + +\b A single lower-case letter specifies the parity: \cq{n} for none, +\cq{o} for odd, \cq{e} for even, \cq{m} for mark and \cq{s} for space. + +\b A single upper-case letter specifies the flow control: \cq{N} for +none, \cq{X} for XON/XOFF, \cq{R} for RTS/CTS and \cq{D} for +DSR/DTR. + +For example, \cq{-sercfg 19200,8,n,1,N} denotes a baud rate of +19200, 8 data bits, no parity, 1 stop bit and no flow control.