-\versionid $Id: config.but,v 1.17 2001/12/06 13:28:02 simon Exp $
+\versionid $Id: config.but,v 1.18 2001/12/06 20:05:39 simon Exp $
\C{config} Configuring PuTTY
summary of the differences between SSH, Telnet and rlogin.)
\b The \q{Port} box lets you specify which port number on the server
-to connect to. If you select Telnet, Rlogin, or SSH, this box will be
-filled in automatically to the usual value, and you will only need to
-change it if you have an unusual server. If you select Raw mode, you
-will almost certainly need to fill in the \q{Port} box.
+to connect to. If you select Telnet, Rlogin, or SSH, this box will
+be filled in automatically to the usual value, and you will only
+need to change it if you have an unusual server. If you select Raw
+mode (see \k{using-rawprot}), you will almost certainly need to fill
+in the \q{Port} box.
\S{config-saving} Loading and storing saved sessions
Auto wrap mode can be turned on and off by control sequences sent by
the server. This configuration option only controls the \e{default}
state. If you modify this option in mid-session using \q{Change
-Settings}, you will need to reset the terminal \#{ FIXME } before
-the change takes effect.
+Settings}, you will need to reset the terminal (see
+\k{reset-terminal}) before the change takes effect.
\S{config-decom} \q{DEC Origin Mode initially on}
like the wrong part of the screen, you could try turning DEC Origin
Mode on to see whether that helps.
-DEC Origin Mode can be turned on and off by control sequences sent by
-the server. This configuration option only controls the \e{default}
-state. If you modify this option in mid-session using \q{Change
-Settings}, you will need to reset the terminal \#{ FIXME } before
-the change takes effect.
+DEC Origin Mode can be turned on and off by control sequences sent
+by the server. This configuration option only controls the
+\e{default} state. If you modify this option in mid-session using
+\q{Change Settings}, you will need to reset the terminal (see
+\k{reset-terminal}) before the change takes effect.
\S{config-crlf} \q{Implicit CR in every LF}
default background colour. With this option enabled, it is done in
the \e{current} background colour.
+Background-colour erase can be turned on and off by control
+sequences sent by the server. This configuration option only
+controls the \e{default} state. If you modify this option in
+mid-session using \q{Change Settings}, you will need to reset the
+terminal (see \k{reset-terminal}) before the change takes effect.
+
\S{config-blink} \q{Enable blinking text}
\cfg{winhelp-topic}{terminal.blink}
This is very distracting, so PuTTY allows you to turn blinking text
off completely.
+When blinking text is disabled and the server attempts to make some
+text blink, PuTTY will instead display the text with a bolded
+background colour.
+
+Blinking text can be turned on and off by control sequences sent by
+the server. This configuration option only controls the \e{default}
+state. If you modify this option in mid-session using \q{Change
+Settings}, you will need to reset the terminal (see
+\k{reset-terminal}) before the change takes effect.
+
\S{config-answerback} \q{Answerback to ^E}
\cfg{winhelp-topic}{terminal.answerback}
server sends it the ^E enquiry character. Normally it just sends
the string \q{PuTTY}.
+If you accidentally write the contents of a binary file to your
+terminal, you will probably find that it contains more than one ^E
+character, and as a result your next command line will probably read
+\q{PuTTYPuTTYPuTTY...} as if you had typed the answerback string
+multiple times at the keyboard. If you set the answerback string to
+be empty, this problem should go away, but doing so might cause
+other problems.
+
\S{config-localecho} \q{Local echo}
\cfg{winhelp-topic}{terminal.localecho}
\cfg{winhelp-topic}{behaviour.altenter}
If this option is enabled, then pressing Alt-Enter will cause the
-PuTTY window to become full-screen. (See \k{using-fullscreen}).
-Pressing Alt-Enter again will restore the previous window size.
+PuTTY window to become full-screen. Pressing Alt-Enter again will
+restore the previous window size.
+
+The full-screen feature is also available from the System menu, even
+when it is configured not to be available on the Alt-Enter key. See
+\k{using-fullscreen}.
\H{config-translation} The Translation panel
forwarding allows you to securely give those applications access to
a local X display on your PC.
-This feature will only be useful if you have an X server on your PC,
-such as Exceed or XWin32.
-
To enable X11 forwarding, check the \q{Enable X11 forwarding} box.
If your X display is not the primary display on your local machine
(which it almost certainly will be unless you have deliberately
arranged otherwise), you need to enter its location in the \q{X
display location} box.
-\# FIXME: perhaps link to some more general X forwarding info?
+See \k{using-x-forwarding} for more information about X11
+forwarding.
\S{config-ssh-portfwd} Port forwarding
\cfg{winhelp-topic}{ssh.tunnels.portfwd}
Port forwarding allows you to tunnel other types of network
-connection down an SSH connection.
-
-To set up a local port forwarding, make sure the \q{Local} radio
-button is set. Then enter a local port number (on your PC) in the
-\q{Source port} box, and a hostname and port number (separated by a
-colon) in the \q{Destination} box, and finally press the \q{Add}
-button. For example, you might select a source port of 10079, and a
-destination of \c{server2.example.com:79}.
-
-If you do this, and then start the session, you should find that
-connecting to your local PC on port 10079 gives you a connection to
-port 79 (the finger server) on \c{server2.example.com}. The
-connection is actually going to PuTTY itself, which encrypts the
-connection data and sends it down the secure channel to the SSH
-server. The connection then proceeds in clear from there to the
-eventual destination. So you might use this (for example) to forward
-a connection between two non-hostile network zones that are only
-connected by a hostile zone such as the open Internet.
-
-You can forward ports on the SSH server machine in the other
-direction, too (so the connection will start at the server end and
-be sent down the secure connection to PuTTY, which will make the
-real connection to the destination). To work this way round, just
-click the \q{Remote} radio button instead of \q{Local}.
-
-\# FIXME: perhaps move this to a general port-forwarding section and
-\# just link to it here?
+connection down an SSH session. See \k{using-port-forwarding} for a
+general discussion of port forwarding and how it works.
+
+The port forwarding section in the Tunnels panel shows a list of all
+the port forwardings that PuTTY will try to set up when it connects
+to the server. By default no port forwardings are set up, so this
+list is empty.
+
+To add a port forwarding:
+
+\b Set one of the \q{Local} or \q{Remote} radio buttons, depending
+on whether you want to forward a local port to a remote destination
+(\q{Local}) or forward a remote port to a local destination
+(\q{Remote}).
+
+\b Enter a source port number into the \q{Source port} box. For
+local forwardings, PuTTY will listen on this port of your PC. For
+remote forwardings, your SSH server will listen on this port of the
+remote machine. Note that most servers will not allow you to listen
+on port numbers less than 1024.
+
+\b Enter a hostname and port number separated by a colon, in the
+\q{Destination} box. Connections received on the source port will be
+directed to this destination. For example, to connect to a POP-3
+server, you might enter \c{popserver.example.com:110}.
+
+\b Click the \q{Add} button. Your forwarding details should appear
+in the list box.
+
+To remove a port forwarding, simply select its details in the list
+box, and click the \q{Remove} button.
\H{config-file} Storing configuration in a file
~mdw / sgt / putty / blobdiff