+/*
+ * SSH backend.
+ */
+
#include <stdio.h>
#include <stdlib.h>
#include <stdarg.h>
#include <assert.h>
+#include <limits.h>
+#include <signal.h>
#include "putty.h"
#include "tree234.h"
#define SSH1_SMSG_AUTH_CCARD_CHALLENGE 71 /* 0x47 */
#define SSH1_CMSG_AUTH_CCARD_RESPONSE 72 /* 0x48 */
+#define SSH1_AUTH_RHOSTS 1 /* 0x1 */
+#define SSH1_AUTH_RSA 2 /* 0x2 */
+#define SSH1_AUTH_PASSWORD 3 /* 0x3 */
+#define SSH1_AUTH_RHOSTS_RSA 4 /* 0x4 */
#define SSH1_AUTH_TIS 5 /* 0x5 */
#define SSH1_AUTH_CCARD 16 /* 0x10 */
#define SSH2_MSG_KEX_DH_GEX_GROUP 31 /* 0x1f */
#define SSH2_MSG_KEX_DH_GEX_INIT 32 /* 0x20 */
#define SSH2_MSG_KEX_DH_GEX_REPLY 33 /* 0x21 */
+#define SSH2_MSG_KEXRSA_PUBKEY 30 /* 0x1e */
+#define SSH2_MSG_KEXRSA_SECRET 31 /* 0x1f */
+#define SSH2_MSG_KEXRSA_DONE 32 /* 0x20 */
#define SSH2_MSG_USERAUTH_REQUEST 50 /* 0x32 */
#define SSH2_MSG_USERAUTH_FAILURE 51 /* 0x33 */
#define SSH2_MSG_USERAUTH_SUCCESS 52 /* 0x34 */
* Packet type contexts, so that ssh2_pkt_type can correctly decode
* the ambiguous type numbers back into the correct type strings.
*/
-#define SSH2_PKTCTX_DHGROUP 0x0001
-#define SSH2_PKTCTX_DHGEX 0x0002
-#define SSH2_PKTCTX_KEX_MASK 0x000F
-#define SSH2_PKTCTX_PUBLICKEY 0x0010
-#define SSH2_PKTCTX_PASSWORD 0x0020
-#define SSH2_PKTCTX_KBDINTER 0x0040
-#define SSH2_PKTCTX_AUTH_MASK 0x00F0
+typedef enum {
+ SSH2_PKTCTX_NOKEX,
+ SSH2_PKTCTX_DHGROUP,
+ SSH2_PKTCTX_DHGEX,
+ SSH2_PKTCTX_RSAKEX
+} Pkt_KCtx;
+typedef enum {
+ SSH2_PKTCTX_NOAUTH,
+ SSH2_PKTCTX_PUBLICKEY,
+ SSH2_PKTCTX_PASSWORD,
+ SSH2_PKTCTX_KBDINTER
+} Pkt_ACtx;
#define SSH2_DISCONNECT_HOST_NOT_ALLOWED_TO_CONNECT 1 /* 0x1 */
#define SSH2_DISCONNECT_PROTOCOL_ERROR 2 /* 0x2 */
/*
* Codes for terminal modes.
* Most of these are the same in SSH-1 and SSH-2.
- * This list is derived from draft-ietf-secsh-connect-25 and
+ * This list is derived from RFC 4254 and
* SSH-1 RFC-1.2.31.
*/
static const struct {
}
#define translate(x) if (type == x) return #x
-#define translatec(x,ctx) if (type == x && (pkt_ctx & ctx)) return #x
+#define translatek(x,ctx) if (type == x && (pkt_kctx == ctx)) return #x
+#define translatea(x,ctx) if (type == x && (pkt_actx == ctx)) return #x
static char *ssh1_pkt_type(int type)
{
translate(SSH1_MSG_DISCONNECT);
translate(SSH1_CMSG_AUTH_CCARD_RESPONSE);
return "unknown";
}
-static char *ssh2_pkt_type(int pkt_ctx, int type)
+static char *ssh2_pkt_type(Pkt_KCtx pkt_kctx, Pkt_ACtx pkt_actx, int type)
{
translate(SSH2_MSG_DISCONNECT);
translate(SSH2_MSG_IGNORE);
translate(SSH2_MSG_SERVICE_ACCEPT);
translate(SSH2_MSG_KEXINIT);
translate(SSH2_MSG_NEWKEYS);
- translatec(SSH2_MSG_KEXDH_INIT, SSH2_PKTCTX_DHGROUP);
- translatec(SSH2_MSG_KEXDH_REPLY, SSH2_PKTCTX_DHGROUP);
- translatec(SSH2_MSG_KEX_DH_GEX_REQUEST, SSH2_PKTCTX_DHGEX);
- translatec(SSH2_MSG_KEX_DH_GEX_GROUP, SSH2_PKTCTX_DHGEX);
- translatec(SSH2_MSG_KEX_DH_GEX_INIT, SSH2_PKTCTX_DHGEX);
- translatec(SSH2_MSG_KEX_DH_GEX_REPLY, SSH2_PKTCTX_DHGEX);
+ translatek(SSH2_MSG_KEXDH_INIT, SSH2_PKTCTX_DHGROUP);
+ translatek(SSH2_MSG_KEXDH_REPLY, SSH2_PKTCTX_DHGROUP);
+ translatek(SSH2_MSG_KEX_DH_GEX_REQUEST, SSH2_PKTCTX_DHGEX);
+ translatek(SSH2_MSG_KEX_DH_GEX_GROUP, SSH2_PKTCTX_DHGEX);
+ translatek(SSH2_MSG_KEX_DH_GEX_INIT, SSH2_PKTCTX_DHGEX);
+ translatek(SSH2_MSG_KEX_DH_GEX_REPLY, SSH2_PKTCTX_DHGEX);
+ translatek(SSH2_MSG_KEXRSA_PUBKEY, SSH2_PKTCTX_RSAKEX);
+ translatek(SSH2_MSG_KEXRSA_SECRET, SSH2_PKTCTX_RSAKEX);
+ translatek(SSH2_MSG_KEXRSA_DONE, SSH2_PKTCTX_RSAKEX);
translate(SSH2_MSG_USERAUTH_REQUEST);
translate(SSH2_MSG_USERAUTH_FAILURE);
translate(SSH2_MSG_USERAUTH_SUCCESS);
translate(SSH2_MSG_USERAUTH_BANNER);
- translatec(SSH2_MSG_USERAUTH_PK_OK, SSH2_PKTCTX_PUBLICKEY);
- translatec(SSH2_MSG_USERAUTH_PASSWD_CHANGEREQ, SSH2_PKTCTX_PASSWORD);
- translatec(SSH2_MSG_USERAUTH_INFO_REQUEST, SSH2_PKTCTX_KBDINTER);
- translatec(SSH2_MSG_USERAUTH_INFO_RESPONSE, SSH2_PKTCTX_KBDINTER);
+ translatea(SSH2_MSG_USERAUTH_PK_OK, SSH2_PKTCTX_PUBLICKEY);
+ translatea(SSH2_MSG_USERAUTH_PASSWD_CHANGEREQ, SSH2_PKTCTX_PASSWORD);
+ translatea(SSH2_MSG_USERAUTH_INFO_REQUEST, SSH2_PKTCTX_KBDINTER);
+ translatea(SSH2_MSG_USERAUTH_INFO_RESPONSE, SSH2_PKTCTX_KBDINTER);
translate(SSH2_MSG_GLOBAL_REQUEST);
translate(SSH2_MSG_REQUEST_SUCCESS);
translate(SSH2_MSG_REQUEST_FAILURE);
*
* - OUR_V2_WINSIZE is the maximum window size we present on SSH-2
* channels.
+ *
+ * - OUR_V2_BIGWIN is the window size we advertise for the only
+ * channel in a simple connection. It must be <= INT_MAX.
*/
#define SSH1_BUFFER_LIMIT 32768
#define SSH_MAX_BACKLOG 32768
#define OUR_V2_WINSIZE 16384
+#define OUR_V2_BIGWIN 0x7fffffff
#define OUR_V2_MAXPKT 0x4000UL
/* Maximum length of passwords/passphrases (arbitrary) */
};
/*
+ * little structure to keep track of outstanding WINDOW_ADJUSTs
+ */
+struct winadj {
+ struct winadj *next;
+ unsigned size;
+};
+
+/*
* 2-3-4 tree storing channels.
*/
struct ssh_channel {
* A channel is completely finished with when all four bits are set.
*/
int closes;
+ /*
+ * True if this channel is causing the underlying connection to be
+ * throttled.
+ */
+ int throttling_conn;
union {
- struct ssh1_data_channel {
- int throttling;
- } v1;
struct ssh2_data_channel {
bufchain outbuffer;
unsigned remwindow, remmaxpkt;
- unsigned locwindow;
+ /* locwindow is signed so we can cope with excess data. */
+ int locwindow, locmaxwin;
+ /*
+ * remlocwin is the amount of local window that we think
+ * the remote end had available to it after it sent the
+ * last data packet or window adjust ack.
+ */
+ int remlocwin;
+ /*
+ * These store the list of window adjusts that haven't
+ * been acked.
+ */
+ struct winadj *winadj_head, *winadj_tail;
+ enum { THROTTLED, UNTHROTTLING, UNTHROTTLED } throttle_state;
} v2;
} v;
union {
static int ssh2_try_send(struct ssh_channel *c);
static void ssh2_add_channel_data(struct ssh_channel *c, char *buf, int len);
static void ssh_throttle_all(Ssh ssh, int enable, int bufsize);
-static void ssh2_set_window(struct ssh_channel *c, unsigned newwin);
+static void ssh2_set_window(struct ssh_channel *c, int newwin);
static int ssh_sendbuffer(void *handle);
static int ssh_do_close(Ssh ssh, int notify_exit);
static unsigned long ssh_pkt_getuint32(struct Packet *pkt);
void *cs_comp_ctx, *sc_comp_ctx;
const struct ssh_kex *kex;
const struct ssh_signkey *hostkey;
- unsigned char v2_session_id[32];
+ unsigned char v2_session_id[SSH2_KEX_MAX_HASH_LEN];
int v2_session_id_len;
void *kex_ctx;
tree234 *channels; /* indexed by local id */
struct ssh_channel *mainchan; /* primary session channel */
+ int ncmode; /* is primary channel direct-tcpip? */
int exitcode;
int close_expected;
int clean_exit;
bufchain banner; /* accumulates banners during do_ssh2_authconn */
- int pkt_ctx;
+ Pkt_KCtx pkt_kctx;
+ Pkt_ACtx pkt_actx;
void *x11auth;
int version;
- int v1_throttle_count;
+ int conn_throttle_count;
int overall_bufsize;
int throttled_all;
int v1_stdout_throttling;
{
int i;
for (i = 0; i < len; i++)
- if (buf[i] != '\r' && (trusted || buf[i] & 0x60))
+ if (buf[i] != '\r' && (trusted || buf[i] == '\n' || (buf[i] & 0x60)))
fputc(buf[i], stderr);
}
/* "Session data" packets - omit the data field */
if ((st->pktin->type == SSH1_SMSG_STDOUT_DATA) ||
(st->pktin->type == SSH1_SMSG_STDERR_DATA)) {
- do_blank = TRUE; blank_prefix = 0;
- } else if (st->pktin->type == SSH1_MSG_CHANNEL_DATA) {
do_blank = TRUE; blank_prefix = 4;
+ } else if (st->pktin->type == SSH1_MSG_CHANNEL_DATA) {
+ do_blank = TRUE; blank_prefix = 8;
}
if (do_blank) {
blank.offset = blank_prefix;
int do_blank = FALSE, blank_prefix = 0;
/* "Session data" packets - omit the data field */
if (st->pktin->type == SSH2_MSG_CHANNEL_DATA) {
- do_blank = TRUE; blank_prefix = 4;
- } else if (st->pktin->type == SSH2_MSG_CHANNEL_EXTENDED_DATA) {
do_blank = TRUE; blank_prefix = 8;
+ } else if (st->pktin->type == SSH2_MSG_CHANNEL_EXTENDED_DATA) {
+ do_blank = TRUE; blank_prefix = 12;
}
if (do_blank) {
blank.offset = blank_prefix;
}
}
log_packet(ssh->logctx, PKT_INCOMING, st->pktin->type,
- ssh2_pkt_type(ssh->pkt_ctx, st->pktin->type),
+ ssh2_pkt_type(ssh->pkt_kctx, ssh->pkt_actx,
+ st->pktin->type),
st->pktin->data+6, st->pktin->length-6,
nblanks, &blank);
}
zlib_compress_block(ssh->cs_comp_ctx,
pkt->data + 12, pkt->length - 12,
&compblk, &complen);
+ ssh_pkt_ensure(pkt, complen + 2); /* just in case it's got bigger */
memcpy(pkt->data + 12, compblk, complen);
sfree(compblk);
pkt->length = complen + 12;
return biglen + 4; /* len(length+padding+type+data+CRC) */
}
+static int s_write(Ssh ssh, void *data, int len)
+{
+ if (ssh->logctx)
+ log_packet(ssh->logctx, PKT_OUTGOING, -1, NULL, data, len, 0, NULL);
+ return sk_write(ssh->s, (char *)data, len);
+}
+
static void s_wrpkt(Ssh ssh, struct Packet *pkt)
{
int len, backlog, offset;
len = s_wrpkt_prepare(ssh, pkt, &offset);
- backlog = sk_write(ssh->s, (char *)pkt->data + offset, len);
+ backlog = s_write(ssh, pkt->data + offset, len);
if (backlog > SSH_MAX_BACKLOG)
ssh_throttle_all(ssh, 1, backlog);
ssh_free_packet(pkt);
while ((argtype = va_arg(ap, int)) != PKT_END) {
unsigned char *argp, argchar;
+ char *sargp;
unsigned long argint;
int arglen;
switch (argtype) {
ssh_pkt_adddata(pkt, argp, arglen);
break;
case PKT_STR:
- argp = va_arg(ap, unsigned char *);
- ssh_pkt_addstring(pkt, argp);
+ sargp = va_arg(ap, char *);
+ ssh_pkt_addstring(pkt, sargp);
break;
case PKT_BIGNUM:
bn = va_arg(ap, Bignum);
static void ssh1_pkt_addmp(struct Packet *pkt, Bignum b)
{
int len = ssh1_bignum_length(b);
- unsigned char *data = snewn(len, char);
+ unsigned char *data = snewn(len, unsigned char);
(void) ssh1_write_bignum(data, b);
ssh_pkt_adddata(pkt, data, len);
sfree(data);
if (ssh->logctx)
log_packet(ssh->logctx, PKT_OUTGOING, pkt->data[5],
- ssh2_pkt_type(ssh->pkt_ctx, pkt->data[5]),
+ ssh2_pkt_type(ssh->pkt_kctx, ssh->pkt_actx, pkt->data[5]),
pkt->body, pkt->length - (pkt->body - pkt->data),
pkt->nblanks, pkt->blanks);
sfree(pkt->blanks); pkt->blanks = NULL;
return;
}
len = ssh2_pkt_construct(ssh, pkt);
- backlog = sk_write(ssh->s, (char *)pkt->data, len);
+ backlog = s_write(ssh, pkt->data, len);
if (backlog > SSH_MAX_BACKLOG)
ssh_throttle_all(ssh, 1, backlog);
* get encrypted with a known IV.
*/
struct Packet *ipkt = ssh2_pkt_init(SSH2_MSG_IGNORE);
+ ssh2_pkt_addstring_start(ipkt);
ssh2_pkt_defer_noqueue(ssh, ipkt, TRUE);
}
len = ssh2_pkt_construct(ssh, pkt);
ssh2_pkt_send_noqueue(ssh, pkt);
}
-#if 0 /* disused */
/*
* Either queue or defer a packet, depending on whether queueing is
* set.
else
ssh2_pkt_defer_noqueue(ssh, pkt, FALSE);
}
-#endif
/*
* Send the whole deferred data block constructed by
static void ssh_pkt_defersend(Ssh ssh)
{
int backlog;
- backlog = sk_write(ssh->s, (char *)ssh->deferred_send_data,
- ssh->deferred_len);
+ backlog = s_write(ssh, ssh->deferred_send_data, ssh->deferred_len);
ssh->deferred_len = ssh->deferred_size = 0;
sfree(ssh->deferred_send_data);
ssh->deferred_send_data = NULL;
}
/*
+ * Send a packet whose length needs to be disguised (typically
+ * passwords or keyboard-interactive responses).
+ */
+static void ssh2_pkt_send_with_padding(Ssh ssh, struct Packet *pkt,
+ int padsize)
+{
+#if 0
+ if (0) {
+ /*
+ * The simplest way to do this is to adjust the
+ * variable-length padding field in the outgoing packet.
+ *
+ * Currently compiled out, because some Cisco SSH servers
+ * don't like excessively padded packets (bah, why's it
+ * always Cisco?)
+ */
+ pkt->forcepad = padsize;
+ ssh2_pkt_send(ssh, pkt);
+ } else
+#endif
+ {
+ /*
+ * If we can't do that, however, an alternative approach is
+ * to use the pkt_defer mechanism to bundle the packet
+ * tightly together with an SSH_MSG_IGNORE such that their
+ * combined length is a constant. So first we construct the
+ * final form of this packet and defer its sending.
+ */
+ ssh2_pkt_defer(ssh, pkt);
+
+ /*
+ * Now construct an SSH_MSG_IGNORE which includes a string
+ * that's an exact multiple of the cipher block size. (If
+ * the cipher is NULL so that the block size is
+ * unavailable, we don't do this trick at all, because we
+ * gain nothing by it.)
+ */
+ if (ssh->cscipher) {
+ int stringlen, i;
+
+ stringlen = (256 - ssh->deferred_len);
+ stringlen += ssh->cscipher->blksize - 1;
+ stringlen -= (stringlen % ssh->cscipher->blksize);
+ if (ssh->cscomp) {
+ /*
+ * Temporarily disable actual compression, so we
+ * can guarantee to get this string exactly the
+ * length we want it. The compression-disabling
+ * routine should return an integer indicating how
+ * many bytes we should adjust our string length
+ * by.
+ */
+ stringlen -=
+ ssh->cscomp->disable_compression(ssh->cs_comp_ctx);
+ }
+ pkt = ssh2_pkt_init(SSH2_MSG_IGNORE);
+ ssh2_pkt_addstring_start(pkt);
+ for (i = 0; i < stringlen; i++) {
+ char c = (char) random_byte();
+ ssh2_pkt_addstring_data(pkt, &c, 1);
+ }
+ ssh2_pkt_defer(ssh, pkt);
+ }
+ ssh_pkt_defersend(ssh);
+ }
+}
+
+/*
* Send all queued SSH-2 packets. We send them by means of
* ssh2_pkt_defer_noqueue(), in case they included a pair of
* packets that needed to be lumped together.
ssh->remote_bugs = 0;
+ /*
+ * General notes on server version strings:
+ * - Not all servers reporting "Cisco-1.25" have all the bugs listed
+ * here -- in particular, we've heard of one that's perfectly happy
+ * with SSH1_MSG_IGNOREs -- but this string never seems to change,
+ * so we can't distinguish them.
+ */
if (ssh->cfg.sshbug_ignore1 == FORCE_ON ||
(ssh->cfg.sshbug_ignore1 == AUTO &&
(!strcmp(imp, "1.2.18") || !strcmp(imp, "1.2.19") ||
}
}
+/*
+ * Send an appropriate SSH version string.
+ */
+static void ssh_send_verstring(Ssh ssh, char *svers)
+{
+ char *verstring;
+
+ if (ssh->version == 2) {
+ /*
+ * Construct a v2 version string.
+ */
+ verstring = dupprintf("SSH-2.0-%s\015\012", sshver);
+ } else {
+ /*
+ * Construct a v1 version string.
+ */
+ verstring = dupprintf("SSH-%s-%s\012",
+ (ssh_versioncmp(svers, "1.5") <= 0 ?
+ svers : "1.5"),
+ sshver);
+ }
+
+ ssh_fix_verstring(verstring);
+
+ if (ssh->version == 2) {
+ size_t len;
+ /*
+ * Record our version string.
+ */
+ len = strcspn(verstring, "\015\012");
+ ssh->v_c = snewn(len + 1, char);
+ memcpy(ssh->v_c, verstring, len);
+ ssh->v_c[len] = 0;
+ }
+
+ logeventf(ssh, "We claim version: %.*s",
+ strcspn(verstring, "\015\012"), verstring);
+ s_write(ssh, verstring, strlen(verstring));
+ sfree(verstring);
+}
+
static int do_ssh_init(Ssh ssh, unsigned char c)
{
struct do_ssh_init_state {
crStop(0);
}
- {
- char *verstring;
+ if (s->proto2 && (ssh->cfg.sshprot >= 2 || !s->proto1))
+ ssh->version = 2;
+ else
+ ssh->version = 1;
- if (s->proto2 && (ssh->cfg.sshprot >= 2 || !s->proto1)) {
- /*
- * Construct a v2 version string.
- */
- verstring = dupprintf("SSH-2.0-%s\015\012", sshver);
- ssh->version = 2;
- } else {
- /*
- * Construct a v1 version string.
- */
- verstring = dupprintf("SSH-%s-%s\012",
- (ssh_versioncmp(s->version, "1.5") <= 0 ?
- s->version : "1.5"),
- sshver);
- ssh->version = 1;
- }
+ logeventf(ssh, "Using SSH protocol version %d", ssh->version);
- ssh_fix_verstring(verstring);
+ /* Send the version string, if we haven't already */
+ if (ssh->cfg.sshprot != 3)
+ ssh_send_verstring(ssh, s->version);
- if (ssh->version == 2) {
- size_t len;
- /*
- * Hash our version string and their version string.
- */
- len = strcspn(verstring, "\015\012");
- ssh->v_c = snewn(len + 1, char);
- memcpy(ssh->v_c, verstring, len);
- ssh->v_c[len] = 0;
- len = strcspn(s->vstring, "\015\012");
- ssh->v_s = snewn(len + 1, char);
- memcpy(ssh->v_s, s->vstring, len);
- ssh->v_s[len] = 0;
+ if (ssh->version == 2) {
+ size_t len;
+ /*
+ * Record their version string.
+ */
+ len = strcspn(s->vstring, "\015\012");
+ ssh->v_s = snewn(len + 1, char);
+ memcpy(ssh->v_s, s->vstring, len);
+ ssh->v_s[len] = 0;
- /*
- * Initialise SSH-2 protocol.
- */
- ssh->protocol = ssh2_protocol;
- ssh2_protocol_setup(ssh);
- ssh->s_rdpkt = ssh2_rdpkt;
- } else {
- /*
- * Initialise SSH-1 protocol.
- */
- ssh->protocol = ssh1_protocol;
- ssh1_protocol_setup(ssh);
- ssh->s_rdpkt = ssh1_rdpkt;
- }
- logeventf(ssh, "We claim version: %.*s",
- strcspn(verstring, "\015\012"), verstring);
- sk_write(ssh->s, verstring, strlen(verstring));
- sfree(verstring);
- if (ssh->version == 2)
- do_ssh2_transport(ssh, NULL, -1, NULL);
+ /*
+ * Initialise SSH-2 protocol.
+ */
+ ssh->protocol = ssh2_protocol;
+ ssh2_protocol_setup(ssh);
+ ssh->s_rdpkt = ssh2_rdpkt;
+ } else {
+ /*
+ * Initialise SSH-1 protocol.
+ */
+ ssh->protocol = ssh1_protocol;
+ ssh1_protocol_setup(ssh);
+ ssh->s_rdpkt = ssh1_rdpkt;
}
-
- logeventf(ssh, "Using SSH protocol version %d", ssh->version);
+ if (ssh->version == 2)
+ do_ssh2_transport(ssh, NULL, -1, NULL);
update_specials_menu(ssh->frontend);
ssh->state = SSH_STATE_BEFORE_SIZE;
static void ssh_process_incoming_data(Ssh ssh,
unsigned char **data, int *datalen)
{
- struct Packet *pktin = ssh->s_rdpkt(ssh, data, datalen);
+ struct Packet *pktin;
+
+ pktin = ssh->s_rdpkt(ssh, data, datalen);
if (pktin) {
ssh->protocol(ssh, NULL, 0, pktin);
ssh_free_packet(pktin);
static void ssh_gotdata(Ssh ssh, unsigned char *data, int datalen)
{
+ /* Log raw data, if we're in that mode. */
+ if (ssh->logctx)
+ log_packet(ssh->logctx, PKT_INCOMING, -1, NULL, data, datalen,
+ 0, NULL);
+
crBegin(ssh->ssh_gotdata_crstate);
/*
error_msg = "Server closed network connection";
}
+ if (ssh->close_expected && ssh->clean_exit && ssh->exitcode < 0)
+ ssh->exitcode = 0;
+
if (need_notify)
notify_remote_exit(ssh->frontend);
return err;
}
+ /*
+ * If the SSH version number's fixed, set it now, and if it's SSH-2,
+ * send the version string too.
+ */
+ if (ssh->cfg.sshprot == 0)
+ ssh->version = 1;
+ if (ssh->cfg.sshprot == 3) {
+ ssh->version = 2;
+ ssh_send_verstring(ssh, NULL);
+ }
+
return NULL;
}
/*
* Throttle or unthrottle the SSH connection.
*/
-static void ssh1_throttle(Ssh ssh, int adjust)
+static void ssh_throttle_conn(Ssh ssh, int adjust)
{
- int old_count = ssh->v1_throttle_count;
- ssh->v1_throttle_count += adjust;
- assert(ssh->v1_throttle_count >= 0);
- if (ssh->v1_throttle_count && !old_count) {
+ int old_count = ssh->conn_throttle_count;
+ ssh->conn_throttle_count += adjust;
+ assert(ssh->conn_throttle_count >= 0);
+ if (ssh->conn_throttle_count && !old_count) {
ssh_set_frozen(ssh, 1);
- } else if (!ssh->v1_throttle_count && old_count) {
+ } else if (!ssh->conn_throttle_count && old_count) {
ssh_set_frozen(ssh, 0);
}
}
} else {
send_packet(ssh, SSH1_MSG_CHANNEL_DATA,
PKT_INT, c->remoteid,
- PKTT_DATA,
PKT_INT, replylen,
+ PKTT_DATA,
PKT_DATA, sentreply, replylen,
PKTT_OTHER,
PKT_END);
ssh->v1_remote_protoflags = ssh_pkt_getuint32(pktin);
s->supported_ciphers_mask = ssh_pkt_getuint32(pktin);
s->supported_auths_mask = ssh_pkt_getuint32(pktin);
+ if ((ssh->remote_bugs & BUG_CHOKES_ON_RSA))
+ s->supported_auths_mask &= ~(1 << SSH1_AUTH_RSA);
ssh->v1_local_protoflags =
ssh->v1_remote_protoflags & SSH1_PROTOFLAGS_SUPPORTED;
crWaitUntil(pktin);
- if ((ssh->remote_bugs & BUG_CHOKES_ON_RSA)) {
+ if ((s->supported_auths_mask & (1 << SSH1_AUTH_RSA)) == 0) {
/* We must not attempt PK auth. Pretend we've already tried it. */
s->tried_publickey = s->tried_agent = 1;
} else {
while (pktin->type == SSH1_SMSG_FAILURE) {
s->pwpkt_type = SSH1_CMSG_AUTH_PASSWORD;
- if (agent_exists() && !s->tried_agent) {
+ if (ssh->cfg.tryagent && agent_exists() && !s->tried_agent) {
/*
* Attempt RSA authentication using Pageant.
*/
s->p += 4;
logeventf(ssh, "Pageant has %d SSH-1 keys", s->nkeys);
for (s->keyi = 0; s->keyi < s->nkeys; s->keyi++) {
- logeventf(ssh, "Trying Pageant key #%d", s->keyi);
- if (s->publickey_blob &&
- !memcmp(s->p, s->publickey_blob,
- s->publickey_bloblen)) {
- logevent("This key matches configured key file");
- s->tried_publickey = 1;
- }
+ unsigned char *pkblob = s->p;
s->p += 4;
{
int n, ok = FALSE;
break;
}
}
+ if (s->publickey_blob) {
+ if (!memcmp(pkblob, s->publickey_blob,
+ s->publickey_bloblen)) {
+ logeventf(ssh, "Pageant key #%d matches "
+ "configured key file", s->keyi);
+ s->tried_publickey = 1;
+ } else
+ /* Skip non-configured key */
+ continue;
+ }
+ logeventf(ssh, "Trying Pageant key #%d", s->keyi);
send_packet(ssh, SSH1_CMSG_AUTH_RSA,
PKT_BIGNUM, s->key.modulus, PKT_END);
crWaitUntil(pktin);
break;
}
sfree(s->response);
+ if (s->publickey_blob && !s->tried_publickey)
+ logevent("Configured key file not in Pageant");
}
if (s->authed)
break;
/* and try again */
} else {
assert(0 && "unexpected return from loadrsakey()");
+ got_passphrase = FALSE; /* placate optimisers */
}
}
}
}
if (s->pwpkt_type == SSH1_CMSG_AUTH_PASSWORD) {
+ if ((s->supported_auths_mask & (1 << SSH1_AUTH_PASSWORD)) == 0) {
+ bombout(("No supported authentication methods available"));
+ crStop(0);
+ }
s->cur_prompt->to_server = TRUE;
s->cur_prompt->name = dupstr("SSH password");
add_prompt(s->cur_prompt, dupprintf("%.90s@%.90s's password: ",
* magnitude of the password length, but it will
* introduce a bit of extra uncertainty.
*
- * A few servers (the old 1.2.18 through 1.2.22)
- * can't deal with SSH1_MSG_IGNORE. For these
- * servers, we need an alternative defence. We make
- * use of the fact that the password is interpreted
- * as a C string: so we can append a NUL, then some
- * random data.
+ * A few servers can't deal with SSH1_MSG_IGNORE, at
+ * least in this context. For these servers, we need
+ * an alternative defence. We make use of the fact
+ * that the password is interpreted as a C string:
+ * so we can append a NUL, then some random data.
*
- * One server (a Cisco one) can deal with neither
- * SSH1_MSG_IGNORE _nor_ a padded password string.
- * For this server we are left with no defences
+ * A few servers can deal with neither SSH1_MSG_IGNORE
+ * here _nor_ a padded password string.
+ * For these servers we are left with no defences
* against password length sniffing.
*/
- if (!(ssh->remote_bugs & BUG_CHOKES_ON_SSH1_IGNORE)) {
+ if (!(ssh->remote_bugs & BUG_CHOKES_ON_SSH1_IGNORE) &&
+ !(ssh->remote_bugs & BUG_NEEDS_SSH1_PLAIN_PASSWORD)) {
/*
* The server can deal with SSH1_MSG_IGNORE, so
* we can use the primary defence.
PKTT_OTHER, PKT_END);
} else {
/*
- * The server has _both_
- * BUG_CHOKES_ON_SSH1_IGNORE and
- * BUG_NEEDS_SSH1_PLAIN_PASSWORD. There is
- * therefore nothing we can do.
+ * The server is believed unable to cope with
+ * any of our password camouflage methods.
*/
int len;
len = strlen(s->cur_prompt->prompts[0]->result);
if (ssh->version == 1) {
send_packet(ssh, SSH1_MSG_CHANNEL_DATA,
PKT_INT, c->remoteid,
- PKTT_DATA,
- PKT_INT, len, PKT_DATA, buf, len,
+ PKT_INT, len, PKTT_DATA, PKT_DATA, buf, len,
PKTT_OTHER, PKT_END);
/*
* In SSH-1 we can return 0 here - implying that forwarded
void sshfwd_unthrottle(struct ssh_channel *c, int bufsize)
{
Ssh ssh = c->ssh;
+ int buflimit;
if (ssh->state == SSH_STATE_CLOSED)
return;
if (ssh->version == 1) {
- if (c->v.v1.throttling && bufsize < SSH1_BUFFER_LIMIT) {
- c->v.v1.throttling = 0;
- ssh1_throttle(ssh, -1);
- }
+ buflimit = SSH1_BUFFER_LIMIT;
} else {
- ssh2_set_window(c, OUR_V2_WINSIZE - bufsize);
+ buflimit = c->v.v2.locmaxwin;
+ ssh2_set_window(c, bufsize < buflimit ? buflimit - bufsize : 0);
+ }
+ if (c->throttling_conn && bufsize <= buflimit) {
+ c->throttling_conn = 0;
+ ssh_throttle_conn(ssh, -1);
}
}
string, stringlen);
if (!ssh->v1_stdout_throttling && bufsize > SSH1_BUFFER_LIMIT) {
ssh->v1_stdout_throttling = 1;
- ssh1_throttle(ssh, +1);
+ ssh_throttle_conn(ssh, +1);
}
}
c->halfopen = FALSE;
c->localid = alloc_channel_id(ssh);
c->closes = 0;
- c->v.v1.throttling = 0;
+ c->throttling_conn = 0;
c->type = CHAN_X11; /* identify channel type */
add234(ssh->channels, c);
send_packet(ssh, SSH1_MSG_CHANNEL_OPEN_CONFIRMATION,
c->halfopen = FALSE;
c->localid = alloc_channel_id(ssh);
c->closes = 0;
- c->v.v1.throttling = 0;
+ c->throttling_conn = 0;
c->type = CHAN_AGENT; /* identify channel type */
c->u.a.lensofar = 0;
add234(ssh->channels, c);
c->halfopen = FALSE;
c->localid = alloc_channel_id(ssh);
c->closes = 0;
- c->v.v1.throttling = 0;
+ c->throttling_conn = 0;
c->type = CHAN_SOCKDATA; /* identify channel type */
add234(ssh->channels, c);
send_packet(ssh, SSH1_MSG_CHANNEL_OPEN_CONFIRMATION,
c->remoteid = localid;
c->halfopen = FALSE;
c->type = CHAN_SOCKDATA;
- c->v.v1.throttling = 0;
+ c->throttling_conn = 0;
pfd_confirm(c->u.pfd.s);
}
/* Data for an agent message. Buffer it. */
while (len > 0) {
if (c->u.a.lensofar < 4) {
- unsigned int l = min(4 - c->u.a.lensofar, len);
+ unsigned int l = min(4 - c->u.a.lensofar, (unsigned)len);
memcpy(c->u.a.msglen + c->u.a.lensofar, p,
l);
p += l;
if (c->u.a.lensofar >= 4 && len > 0) {
unsigned int l =
min(c->u.a.totallen - c->u.a.lensofar,
- len);
+ (unsigned)len);
memcpy(c->u.a.message + c->u.a.lensofar, p,
l);
p += l;
bufsize = 0; /* agent channels never back up */
break;
}
- if (!c->v.v1.throttling && bufsize > SSH1_BUFFER_LIMIT) {
- c->v.v1.throttling = 1;
- ssh1_throttle(ssh, +1);
+ if (!c->throttling_conn && bufsize > SSH1_BUFFER_LIMIT) {
+ c->throttling_conn = 1;
+ ssh_throttle_conn(ssh, +1);
}
}
}
} else {
while (inlen > 0) {
int len = min(inlen, 512);
- send_packet(ssh, SSH1_CMSG_STDIN_DATA, PKTT_DATA,
- PKT_INT, len, PKT_DATA, in, len,
+ send_packet(ssh, SSH1_CMSG_STDIN_DATA,
+ PKT_INT, len, PKTT_DATA, PKT_DATA, in, len,
PKTT_OTHER, PKT_END);
in += len;
inlen -= len;
/*
* SSH-2 key creation method.
+ * (Currently assumes 2 lots of any hash are sufficient to generate
+ * keys/IVs for any cipher/MAC. SSH2_MKKEY_ITERS documents this assumption.)
*/
+#define SSH2_MKKEY_ITERS (2)
static void ssh2_mkkey(Ssh ssh, Bignum K, unsigned char *H, char chr,
unsigned char *keyspace)
{
const struct ssh_mac *scmac_tobe;
const struct ssh_compress *cscomp_tobe;
const struct ssh_compress *sccomp_tobe;
- char *hostkeydata, *sigdata, *keystr, *fingerprint;
- int hostkeylen, siglen;
+ char *hostkeydata, *sigdata, *rsakeydata, *keystr, *fingerprint;
+ int hostkeylen, siglen, rsakeylen;
void *hkey; /* actual host key */
- unsigned char exchange_hash[32];
+ void *rsakey; /* for RSA kex */
+ unsigned char exchange_hash[SSH2_KEX_MAX_HASH_LEN];
int n_preferred_kex;
const struct ssh_kexes *preferred_kex[KEX_MAX];
int n_preferred_ciphers;
s->maclist = macs, s->nmacs = lenof(macs);
begin_key_exchange:
- ssh->pkt_ctx &= ~SSH2_PKTCTX_KEX_MASK;
+ ssh->pkt_kctx = SSH2_PKTCTX_NOKEX;
{
int i, j, commalist_started;
s->preferred_kex[s->n_preferred_kex++] =
&ssh_diffiehellman_group1;
break;
- case CIPHER_WARN:
+ case KEX_RSA:
+ s->preferred_kex[s->n_preferred_kex++] =
+ &ssh_rsa_kex;
+ break;
+ case KEX_WARN:
/* Flag for later. Don't bother if it's the last in
* the list. */
if (i < KEX_MAX - 1) {
crWaitUntil(pktin); /* Ignore packet */
}
- /*
- * Work out the number of bits of key we will need from the key
- * exchange. We start with the maximum key length of either
- * cipher...
- */
- {
- int csbits, scbits;
+ if (ssh->kex->main_type == KEXTYPE_DH) {
+ /*
+ * Work out the number of bits of key we will need from the
+ * key exchange. We start with the maximum key length of
+ * either cipher...
+ */
+ {
+ int csbits, scbits;
- csbits = s->cscipher_tobe->keylen;
- scbits = s->sccipher_tobe->keylen;
- s->nbits = (csbits > scbits ? csbits : scbits);
- }
- /* The keys only have hlen-bit entropy, since they're based on
- * a hash. So cap the key size at hlen bits. */
- if (s->nbits > ssh->kex->hash->hlen * 8)
- s->nbits = ssh->kex->hash->hlen * 8;
+ csbits = s->cscipher_tobe->keylen;
+ scbits = s->sccipher_tobe->keylen;
+ s->nbits = (csbits > scbits ? csbits : scbits);
+ }
+ /* The keys only have hlen-bit entropy, since they're based on
+ * a hash. So cap the key size at hlen bits. */
+ if (s->nbits > ssh->kex->hash->hlen * 8)
+ s->nbits = ssh->kex->hash->hlen * 8;
- /*
- * If we're doing Diffie-Hellman group exchange, start by
- * requesting a group.
- */
- if (!ssh->kex->pdata) {
- logevent("Doing Diffie-Hellman group exchange");
- ssh->pkt_ctx |= SSH2_PKTCTX_DHGEX;
- /*
- * Work out how big a DH group we will need to allow that
- * much data.
- */
- s->pbits = 512 << ((s->nbits - 1) / 64);
- s->pktout = ssh2_pkt_init(SSH2_MSG_KEX_DH_GEX_REQUEST);
- ssh2_pkt_adduint32(s->pktout, s->pbits);
- ssh2_pkt_send_noqueue(ssh, s->pktout);
+ /*
+ * If we're doing Diffie-Hellman group exchange, start by
+ * requesting a group.
+ */
+ if (!ssh->kex->pdata) {
+ logevent("Doing Diffie-Hellman group exchange");
+ ssh->pkt_kctx = SSH2_PKTCTX_DHGEX;
+ /*
+ * Work out how big a DH group we will need to allow that
+ * much data.
+ */
+ s->pbits = 512 << ((s->nbits - 1) / 64);
+ s->pktout = ssh2_pkt_init(SSH2_MSG_KEX_DH_GEX_REQUEST);
+ ssh2_pkt_adduint32(s->pktout, s->pbits);
+ ssh2_pkt_send_noqueue(ssh, s->pktout);
+
+ crWaitUntil(pktin);
+ if (pktin->type != SSH2_MSG_KEX_DH_GEX_GROUP) {
+ bombout(("expected key exchange group packet from server"));
+ crStop(0);
+ }
+ s->p = ssh2_pkt_getmp(pktin);
+ s->g = ssh2_pkt_getmp(pktin);
+ if (!s->p || !s->g) {
+ bombout(("unable to read mp-ints from incoming group packet"));
+ crStop(0);
+ }
+ ssh->kex_ctx = dh_setup_gex(s->p, s->g);
+ s->kex_init_value = SSH2_MSG_KEX_DH_GEX_INIT;
+ s->kex_reply_value = SSH2_MSG_KEX_DH_GEX_REPLY;
+ } else {
+ ssh->pkt_kctx = SSH2_PKTCTX_DHGROUP;
+ ssh->kex_ctx = dh_setup_group(ssh->kex);
+ s->kex_init_value = SSH2_MSG_KEXDH_INIT;
+ s->kex_reply_value = SSH2_MSG_KEXDH_REPLY;
+ logeventf(ssh, "Using Diffie-Hellman with standard group \"%s\"",
+ ssh->kex->groupname);
+ }
- crWaitUntil(pktin);
- if (pktin->type != SSH2_MSG_KEX_DH_GEX_GROUP) {
- bombout(("expected key exchange group packet from server"));
- crStop(0);
- }
- s->p = ssh2_pkt_getmp(pktin);
- s->g = ssh2_pkt_getmp(pktin);
- if (!s->p || !s->g) {
- bombout(("unable to read mp-ints from incoming group packet"));
- crStop(0);
- }
- ssh->kex_ctx = dh_setup_gex(s->p, s->g);
- s->kex_init_value = SSH2_MSG_KEX_DH_GEX_INIT;
- s->kex_reply_value = SSH2_MSG_KEX_DH_GEX_REPLY;
+ logeventf(ssh, "Doing Diffie-Hellman key exchange with hash %s",
+ ssh->kex->hash->text_name);
+ /*
+ * Now generate and send e for Diffie-Hellman.
+ */
+ set_busy_status(ssh->frontend, BUSY_CPU); /* this can take a while */
+ s->e = dh_create_e(ssh->kex_ctx, s->nbits * 2);
+ s->pktout = ssh2_pkt_init(s->kex_init_value);
+ ssh2_pkt_addmp(s->pktout, s->e);
+ ssh2_pkt_send_noqueue(ssh, s->pktout);
+
+ set_busy_status(ssh->frontend, BUSY_WAITING); /* wait for server */
+ crWaitUntil(pktin);
+ if (pktin->type != s->kex_reply_value) {
+ bombout(("expected key exchange reply packet from server"));
+ crStop(0);
+ }
+ set_busy_status(ssh->frontend, BUSY_CPU); /* cogitate */
+ ssh_pkt_getstring(pktin, &s->hostkeydata, &s->hostkeylen);
+ s->hkey = ssh->hostkey->newkey(s->hostkeydata, s->hostkeylen);
+ s->f = ssh2_pkt_getmp(pktin);
+ if (!s->f) {
+ bombout(("unable to parse key exchange reply packet"));
+ crStop(0);
+ }
+ ssh_pkt_getstring(pktin, &s->sigdata, &s->siglen);
+
+ s->K = dh_find_K(ssh->kex_ctx, s->f);
+
+ /* We assume everything from now on will be quick, and it might
+ * involve user interaction. */
+ set_busy_status(ssh->frontend, BUSY_NOT);
+
+ hash_string(ssh->kex->hash, ssh->exhash, s->hostkeydata, s->hostkeylen);
+ if (!ssh->kex->pdata) {
+ hash_uint32(ssh->kex->hash, ssh->exhash, s->pbits);
+ hash_mpint(ssh->kex->hash, ssh->exhash, s->p);
+ hash_mpint(ssh->kex->hash, ssh->exhash, s->g);
+ }
+ hash_mpint(ssh->kex->hash, ssh->exhash, s->e);
+ hash_mpint(ssh->kex->hash, ssh->exhash, s->f);
+
+ dh_cleanup(ssh->kex_ctx);
+ freebn(s->f);
+ if (!ssh->kex->pdata) {
+ freebn(s->g);
+ freebn(s->p);
+ }
} else {
- ssh->pkt_ctx |= SSH2_PKTCTX_DHGROUP;
- ssh->kex_ctx = dh_setup_group(ssh->kex);
- s->kex_init_value = SSH2_MSG_KEXDH_INIT;
- s->kex_reply_value = SSH2_MSG_KEXDH_REPLY;
- logeventf(ssh, "Using Diffie-Hellman with standard group \"%s\"",
- ssh->kex->groupname);
- }
+ logeventf(ssh, "Doing RSA key exchange with hash %s",
+ ssh->kex->hash->text_name);
+ ssh->pkt_kctx = SSH2_PKTCTX_RSAKEX;
+ /*
+ * RSA key exchange. First expect a KEXRSA_PUBKEY packet
+ * from the server.
+ */
+ crWaitUntil(pktin);
+ if (pktin->type != SSH2_MSG_KEXRSA_PUBKEY) {
+ bombout(("expected RSA public key packet from server"));
+ crStop(0);
+ }
- logevent("Doing Diffie-Hellman key exchange");
- /*
- * Now generate and send e for Diffie-Hellman.
- */
- set_busy_status(ssh->frontend, BUSY_CPU); /* this can take a while */
- s->e = dh_create_e(ssh->kex_ctx, s->nbits * 2);
- s->pktout = ssh2_pkt_init(s->kex_init_value);
- ssh2_pkt_addmp(s->pktout, s->e);
- ssh2_pkt_send_noqueue(ssh, s->pktout);
+ ssh_pkt_getstring(pktin, &s->hostkeydata, &s->hostkeylen);
+ hash_string(ssh->kex->hash, ssh->exhash,
+ s->hostkeydata, s->hostkeylen);
+ s->hkey = ssh->hostkey->newkey(s->hostkeydata, s->hostkeylen);
- set_busy_status(ssh->frontend, BUSY_WAITING); /* wait for server */
- crWaitUntil(pktin);
- if (pktin->type != s->kex_reply_value) {
- bombout(("expected key exchange reply packet from server"));
- crStop(0);
- }
- set_busy_status(ssh->frontend, BUSY_CPU); /* cogitate */
- ssh_pkt_getstring(pktin, &s->hostkeydata, &s->hostkeylen);
- s->f = ssh2_pkt_getmp(pktin);
- if (!s->f) {
- bombout(("unable to parse key exchange reply packet"));
- crStop(0);
- }
- ssh_pkt_getstring(pktin, &s->sigdata, &s->siglen);
+ {
+ char *keydata;
+ ssh_pkt_getstring(pktin, &keydata, &s->rsakeylen);
+ s->rsakeydata = snewn(s->rsakeylen, char);
+ memcpy(s->rsakeydata, keydata, s->rsakeylen);
+ }
+
+ s->rsakey = ssh_rsakex_newkey(s->rsakeydata, s->rsakeylen);
+ if (!s->rsakey) {
+ sfree(s->rsakeydata);
+ bombout(("unable to parse RSA public key from server"));
+ crStop(0);
+ }
+
+ hash_string(ssh->kex->hash, ssh->exhash, s->rsakeydata, s->rsakeylen);
+
+ /*
+ * Next, set up a shared secret K, of precisely KLEN -
+ * 2*HLEN - 49 bits, where KLEN is the bit length of the
+ * RSA key modulus and HLEN is the bit length of the hash
+ * we're using.
+ */
+ {
+ int klen = ssh_rsakex_klen(s->rsakey);
+ int nbits = klen - (2*ssh->kex->hash->hlen*8 + 49);
+ int i, byte = 0;
+ unsigned char *kstr1, *kstr2, *outstr;
+ int kstr1len, kstr2len, outstrlen;
+
+ s->K = bn_power_2(nbits - 1);
+
+ for (i = 0; i < nbits; i++) {
+ if ((i & 7) == 0) {
+ byte = random_byte();
+ }
+ bignum_set_bit(s->K, i, (byte >> (i & 7)) & 1);
+ }
+
+ /*
+ * Encode this as an mpint.
+ */
+ kstr1 = ssh2_mpint_fmt(s->K, &kstr1len);
+ kstr2 = snewn(kstr2len = 4 + kstr1len, unsigned char);
+ PUT_32BIT(kstr2, kstr1len);
+ memcpy(kstr2 + 4, kstr1, kstr1len);
- s->K = dh_find_K(ssh->kex_ctx, s->f);
+ /*
+ * Encrypt it with the given RSA key.
+ */
+ outstrlen = (klen + 7) / 8;
+ outstr = snewn(outstrlen, unsigned char);
+ ssh_rsakex_encrypt(ssh->kex->hash, kstr2, kstr2len,
+ outstr, outstrlen, s->rsakey);
+
+ /*
+ * And send it off in a return packet.
+ */
+ s->pktout = ssh2_pkt_init(SSH2_MSG_KEXRSA_SECRET);
+ ssh2_pkt_addstring_start(s->pktout);
+ ssh2_pkt_addstring_data(s->pktout, (char *)outstr, outstrlen);
+ ssh2_pkt_send_noqueue(ssh, s->pktout);
+
+ hash_string(ssh->kex->hash, ssh->exhash, outstr, outstrlen);
+
+ sfree(kstr2);
+ sfree(kstr1);
+ sfree(outstr);
+ }
- /* We assume everything from now on will be quick, and it might
- * involve user interaction. */
- set_busy_status(ssh->frontend, BUSY_NOT);
+ ssh_rsakex_freekey(s->rsakey);
- hash_string(ssh->kex->hash, ssh->exhash, s->hostkeydata, s->hostkeylen);
- if (!ssh->kex->pdata) {
- hash_uint32(ssh->kex->hash, ssh->exhash, s->pbits);
- hash_mpint(ssh->kex->hash, ssh->exhash, s->p);
- hash_mpint(ssh->kex->hash, ssh->exhash, s->g);
+ crWaitUntil(pktin);
+ if (pktin->type != SSH2_MSG_KEXRSA_DONE) {
+ sfree(s->rsakeydata);
+ bombout(("expected signature packet from server"));
+ crStop(0);
+ }
+
+ ssh_pkt_getstring(pktin, &s->sigdata, &s->siglen);
+
+ sfree(s->rsakeydata);
}
- hash_mpint(ssh->kex->hash, ssh->exhash, s->e);
- hash_mpint(ssh->kex->hash, ssh->exhash, s->f);
+
hash_mpint(ssh->kex->hash, ssh->exhash, s->K);
assert(ssh->kex->hash->hlen <= sizeof(s->exchange_hash));
ssh->kex->hash->final(ssh->exhash, s->exchange_hash);
- dh_cleanup(ssh->kex_ctx);
ssh->kex_ctx = NULL;
#if 0
dmemdump(s->exchange_hash, ssh->kex->hash->hlen);
#endif
- s->hkey = ssh->hostkey->newkey(s->hostkeydata, s->hostkeylen);
if (!s->hkey ||
!ssh->hostkey->verifysig(s->hkey, s->sigdata, s->siglen,
(char *)s->exchange_hash,
* hash from the _first_ key exchange.
*/
{
- unsigned char keyspace[40];
+ unsigned char keyspace[SSH2_KEX_MAX_HASH_LEN * SSH2_MKKEY_ITERS];
+ assert(sizeof(keyspace) >= ssh->kex->hash->hlen * SSH2_MKKEY_ITERS);
ssh2_mkkey(ssh,s->K,s->exchange_hash,'C',keyspace);
+ assert((ssh->cscipher->keylen+7) / 8 <=
+ ssh->kex->hash->hlen * SSH2_MKKEY_ITERS);
ssh->cscipher->setkey(ssh->cs_cipher_ctx, keyspace);
ssh2_mkkey(ssh,s->K,s->exchange_hash,'A',keyspace);
+ assert(ssh->cscipher->blksize <=
+ ssh->kex->hash->hlen * SSH2_MKKEY_ITERS);
ssh->cscipher->setiv(ssh->cs_cipher_ctx, keyspace);
ssh2_mkkey(ssh,s->K,s->exchange_hash,'E',keyspace);
+ assert(ssh->csmac->len <=
+ ssh->kex->hash->hlen * SSH2_MKKEY_ITERS);
ssh->csmac->setkey(ssh->cs_mac_ctx, keyspace);
+ memset(keyspace, 0, sizeof(keyspace));
}
logeventf(ssh, "Initialised %.200s client->server encryption",
* hash from the _first_ key exchange.
*/
{
- unsigned char keyspace[40];
+ unsigned char keyspace[SSH2_KEX_MAX_HASH_LEN * SSH2_MKKEY_ITERS];
+ assert(sizeof(keyspace) >= ssh->kex->hash->hlen * SSH2_MKKEY_ITERS);
ssh2_mkkey(ssh,s->K,s->exchange_hash,'D',keyspace);
+ assert((ssh->sccipher->keylen+7) / 8 <=
+ ssh->kex->hash->hlen * SSH2_MKKEY_ITERS);
ssh->sccipher->setkey(ssh->sc_cipher_ctx, keyspace);
ssh2_mkkey(ssh,s->K,s->exchange_hash,'B',keyspace);
+ assert(ssh->sccipher->blksize <=
+ ssh->kex->hash->hlen * SSH2_MKKEY_ITERS);
ssh->sccipher->setiv(ssh->sc_cipher_ctx, keyspace);
ssh2_mkkey(ssh,s->K,s->exchange_hash,'F',keyspace);
+ assert(ssh->scmac->len <=
+ ssh->kex->hash->hlen * SSH2_MKKEY_ITERS);
ssh->scmac->setkey(ssh->sc_mac_ctx, keyspace);
+ memset(keyspace, 0, sizeof(keyspace));
}
logeventf(ssh, "Initialised %.200s server->client encryption",
ssh->sccipher->text_name);
ssh->sccomp->text_name);
/*
- * Free key exchange data.
+ * Free shared secret.
*/
- freebn(s->f);
freebn(s->K);
- if (!ssh->kex->pdata) {
- freebn(s->g);
- freebn(s->p);
- }
/*
* Key exchange is over. Loop straight back round if we have a
len = c->v.v2.remmaxpkt;
pktout = ssh2_pkt_init(SSH2_MSG_CHANNEL_DATA);
ssh2_pkt_adduint32(pktout, c->remoteid);
- dont_log_data(ssh, pktout, PKTLOG_OMIT);
ssh2_pkt_addstring_start(pktout);
+ dont_log_data(ssh, pktout, PKTLOG_OMIT);
ssh2_pkt_addstring_data(pktout, data, len);
end_log_omission(ssh, pktout);
ssh2_pkt_send(ssh, pktout);
}
/*
+ * Set up most of a new ssh_channel for SSH-2.
+ */
+static void ssh2_channel_init(struct ssh_channel *c)
+{
+ Ssh ssh = c->ssh;
+ c->localid = alloc_channel_id(ssh);
+ c->closes = 0;
+ c->throttling_conn = FALSE;
+ c->v.v2.locwindow = c->v.v2.locmaxwin = c->v.v2.remlocwin =
+ ssh->cfg.ssh_simple ? OUR_V2_BIGWIN : OUR_V2_WINSIZE;
+ c->v.v2.winadj_head = c->v.v2.winadj_tail = NULL;
+ c->v.v2.throttle_state = UNTHROTTLED;
+ bufchain_init(&c->v.v2.outbuffer);
+}
+
+/*
* Potentially enlarge the window on an SSH-2 channel.
*/
-static void ssh2_set_window(struct ssh_channel *c, unsigned newwin)
+static void ssh2_set_window(struct ssh_channel *c, int newwin)
{
Ssh ssh = c->ssh;
*
* "Significant" is arbitrarily defined as half the window size.
*/
- if (newwin > c->v.v2.locwindow * 2) {
+ if (newwin / 2 >= c->v.v2.locwindow) {
struct Packet *pktout;
+ struct winadj *wa;
+ /*
+ * In order to keep track of how much window the client
+ * actually has available, we'd like it to acknowledge each
+ * WINDOW_ADJUST. We can't do that directly, so we accompany
+ * it with a CHANNEL_REQUEST that has to be acknowledged.
+ *
+ * This is only necessary if we're opening the window wide.
+ * If we're not, then throughput is being constrained by
+ * something other than the maximum window size anyway.
+ *
+ * We also only send this if the main channel has finished its
+ * initial CHANNEL_REQUESTs and installed the default
+ * CHANNEL_FAILURE handler, so as not to risk giving it
+ * unexpected CHANNEL_FAILUREs.
+ */
+ if (newwin == c->v.v2.locmaxwin &&
+ ssh->packet_dispatch[SSH2_MSG_CHANNEL_FAILURE]) {
+ pktout = ssh2_pkt_init(SSH2_MSG_CHANNEL_REQUEST);
+ ssh2_pkt_adduint32(pktout, c->remoteid);
+ ssh2_pkt_addstring(pktout, "winadj@putty.projects.tartarus.org");
+ ssh2_pkt_addbool(pktout, TRUE);
+ ssh2_pkt_send(ssh, pktout);
+
+ /*
+ * CHANNEL_FAILURE doesn't come with any indication of
+ * what message caused it, so we have to keep track of the
+ * outstanding CHANNEL_REQUESTs ourselves.
+ */
+ wa = snew(struct winadj);
+ wa->size = newwin - c->v.v2.locwindow;
+ wa->next = NULL;
+ if (!c->v.v2.winadj_head)
+ c->v.v2.winadj_head = wa;
+ else
+ c->v.v2.winadj_tail->next = wa;
+ c->v.v2.winadj_tail = wa;
+ if (c->v.v2.throttle_state != UNTHROTTLED)
+ c->v.v2.throttle_state = UNTHROTTLING;
+ } else {
+ /* Pretend the WINDOW_ADJUST was acked immediately. */
+ c->v.v2.remlocwin = newwin;
+ c->v.v2.throttle_state = THROTTLED;
+ }
pktout = ssh2_pkt_init(SSH2_MSG_CHANNEL_WINDOW_ADJUST);
ssh2_pkt_adduint32(pktout, c->remoteid);
ssh2_pkt_adduint32(pktout, newwin - c->v.v2.locwindow);
}
}
+/*
+ * Find the channel associated with a message. If there's no channel,
+ * or it's not properly open, make a noise about it and return NULL.
+ */
+static struct ssh_channel *ssh2_channel_msg(Ssh ssh, struct Packet *pktin)
+{
+ unsigned localid = ssh_pkt_getuint32(pktin);
+ struct ssh_channel *c;
+
+ c = find234(ssh->channels, &localid, ssh_channelfind);
+ if (!c ||
+ (c->halfopen && pktin->type != SSH2_MSG_CHANNEL_OPEN_CONFIRMATION &&
+ pktin->type != SSH2_MSG_CHANNEL_OPEN_FAILURE)) {
+ char *buf = dupprintf("Received %s for %s channel %u",
+ ssh2_pkt_type(ssh->pkt_kctx, ssh->pkt_actx,
+ pktin->type),
+ c ? "half-open" : "nonexistent", localid);
+ ssh_disconnect(ssh, NULL, buf, SSH2_DISCONNECT_PROTOCOL_ERROR, FALSE);
+ sfree(buf);
+ return NULL;
+ }
+ return c;
+}
+
+static void ssh2_msg_channel_success(Ssh ssh, struct Packet *pktin)
+{
+ /*
+ * This should never get called. All channel requests are either
+ * sent with want_reply false or are sent before this handler gets
+ * installed.
+ */
+ struct ssh_channel *c;
+ struct winadj *wa;
+
+ c = ssh2_channel_msg(ssh, pktin);
+ if (!c)
+ return;
+ wa = c->v.v2.winadj_head;
+ if (wa)
+ ssh_disconnect(ssh, NULL, "Received SSH_MSG_CHANNEL_SUCCESS for "
+ "\"winadj@putty.projects.tartarus.org\"",
+ SSH2_DISCONNECT_PROTOCOL_ERROR, FALSE);
+ else
+ ssh_disconnect(ssh, NULL,
+ "Received unsolicited SSH_MSG_CHANNEL_SUCCESS",
+ SSH2_DISCONNECT_PROTOCOL_ERROR, FALSE);
+}
+
+static void ssh2_msg_channel_failure(Ssh ssh, struct Packet *pktin)
+{
+ /*
+ * The only time this should get called is for "winadj@putty"
+ * messages sent above. All other channel requests are either
+ * sent with want_reply false or are sent before this handler gets
+ * installed.
+ */
+ struct ssh_channel *c;
+ struct winadj *wa;
+
+ c = ssh2_channel_msg(ssh, pktin);
+ if (!c)
+ return;
+ wa = c->v.v2.winadj_head;
+ if (!wa) {
+ ssh_disconnect(ssh, NULL,
+ "Received unsolicited SSH_MSG_CHANNEL_FAILURE",
+ SSH2_DISCONNECT_PROTOCOL_ERROR, FALSE);
+ return;
+ }
+ c->v.v2.winadj_head = wa->next;
+ c->v.v2.remlocwin += wa->size;
+ sfree(wa);
+ /*
+ * winadj messages are only sent when the window is fully open, so
+ * if we get an ack of one, we know any pending unthrottle is
+ * complete.
+ */
+ if (c->v.v2.throttle_state == UNTHROTTLING)
+ c->v.v2.throttle_state = UNTHROTTLED;
+}
+
static void ssh2_msg_channel_window_adjust(Ssh ssh, struct Packet *pktin)
{
- unsigned i = ssh_pkt_getuint32(pktin);
struct ssh_channel *c;
- c = find234(ssh->channels, &i, ssh_channelfind);
- if (c && !c->closes) {
+ c = ssh2_channel_msg(ssh, pktin);
+ if (!c)
+ return;
+ if (!c->closes) {
c->v.v2.remwindow += ssh_pkt_getuint32(pktin);
ssh2_try_send_and_unthrottle(c);
}
{
char *data;
int length;
- unsigned i = ssh_pkt_getuint32(pktin);
struct ssh_channel *c;
- c = find234(ssh->channels, &i, ssh_channelfind);
+ c = ssh2_channel_msg(ssh, pktin);
if (!c)
- return; /* nonexistent channel */
+ return;
if (pktin->type == SSH2_MSG_CHANNEL_EXTENDED_DATA &&
ssh_pkt_getuint32(pktin) != SSH2_EXTENDED_DATA_STDERR)
return; /* extended but not stderr */
if (data) {
int bufsize = 0;
c->v.v2.locwindow -= length;
+ c->v.v2.remlocwin -= length;
switch (c->type) {
case CHAN_MAINSESSION:
bufsize =
case CHAN_AGENT:
while (length > 0) {
if (c->u.a.lensofar < 4) {
- unsigned int l = min(4 - c->u.a.lensofar, length);
+ unsigned int l = min(4 - c->u.a.lensofar,
+ (unsigned)length);
memcpy(c->u.a.msglen + c->u.a.lensofar,
data, l);
data += l;
if (c->u.a.lensofar >= 4 && length > 0) {
unsigned int l =
min(c->u.a.totallen - c->u.a.lensofar,
- length);
+ (unsigned)length);
memcpy(c->u.a.message + c->u.a.lensofar,
data, l);
data += l;
break;
}
/*
+ * If it looks like the remote end hit the end of its window,
+ * and we didn't want it to do that, think about using a
+ * larger window.
+ */
+ if (c->v.v2.remlocwin <= 0 && c->v.v2.throttle_state == UNTHROTTLED &&
+ c->v.v2.locmaxwin < 0x40000000)
+ c->v.v2.locmaxwin += OUR_V2_WINSIZE;
+ /*
* If we are not buffering too much data,
* enlarge the window again at the remote side.
+ * If we are buffering too much, we may still
+ * need to adjust the window if the server's
+ * sent excess data.
*/
- if (bufsize < OUR_V2_WINSIZE)
- ssh2_set_window(c, OUR_V2_WINSIZE - bufsize);
+ ssh2_set_window(c, bufsize < c->v.v2.locmaxwin ?
+ c->v.v2.locmaxwin - bufsize : 0);
+ /*
+ * If we're either buffering way too much data, or if we're
+ * buffering anything at all and we're in "simple" mode,
+ * throttle the whole channel.
+ */
+ if ((bufsize > c->v.v2.locmaxwin ||
+ (ssh->cfg.ssh_simple && bufsize > 0)) &&
+ !c->throttling_conn) {
+ c->throttling_conn = 1;
+ ssh_throttle_conn(ssh, +1);
+ }
}
}
static void ssh2_msg_channel_eof(Ssh ssh, struct Packet *pktin)
{
- unsigned i = ssh_pkt_getuint32(pktin);
struct ssh_channel *c;
- c = find234(ssh->channels, &i, ssh_channelfind);
+ c = ssh2_channel_msg(ssh, pktin);
if (!c)
- return; /* nonexistent channel */
+ return;
if (c->type == CHAN_X11) {
/*
static void ssh2_msg_channel_close(Ssh ssh, struct Packet *pktin)
{
- unsigned i = ssh_pkt_getuint32(pktin);
struct ssh_channel *c;
struct Packet *pktout;
- c = find234(ssh->channels, &i, ssh_channelfind);
- if (!c || c->halfopen) {
- bombout(("Received CHANNEL_CLOSE for %s channel %d\n",
- c ? "half-open" : "nonexistent", i));
+ c = ssh2_channel_msg(ssh, pktin);
+ if (!c)
return;
- }
/* Do pre-close processing on the channel. */
switch (c->type) {
case CHAN_MAINSESSION:
static void ssh2_msg_channel_open_confirmation(Ssh ssh, struct Packet *pktin)
{
- unsigned i = ssh_pkt_getuint32(pktin);
struct ssh_channel *c;
struct Packet *pktout;
- c = find234(ssh->channels, &i, ssh_channelfind);
+ c = ssh2_channel_msg(ssh, pktin);
if (!c)
- return; /* nonexistent channel */
+ return;
if (c->type != CHAN_SOCKDATA_DORMANT)
return; /* dunno why they're confirming this */
c->remoteid = ssh_pkt_getuint32(pktin);
"Unknown channel type",
"Resource shortage",
};
- unsigned i = ssh_pkt_getuint32(pktin);
unsigned reason_code;
char *reason_string;
int reason_length;
struct ssh_channel *c;
- c = find234(ssh->channels, &i, ssh_channelfind);
+ c = ssh2_channel_msg(ssh, pktin);
if (!c)
- return; /* nonexistent channel */
+ return;
if (c->type != CHAN_SOCKDATA_DORMANT)
return; /* dunno why they're failing this */
static void ssh2_msg_channel_request(Ssh ssh, struct Packet *pktin)
{
- unsigned localid;
char *type;
int typelen, want_reply;
int reply = SSH2_MSG_CHANNEL_FAILURE; /* default */
struct ssh_channel *c;
struct Packet *pktout;
- localid = ssh_pkt_getuint32(pktin);
+ c = ssh2_channel_msg(ssh, pktin);
+ if (!c)
+ return;
ssh_pkt_getstring(pktin, &type, &typelen);
want_reply = ssh2_pkt_getbool(pktin);
/*
- * First, check that the channel exists. Otherwise,
- * we can instantly disconnect with a rude message.
- */
- c = find234(ssh->channels, &localid, ssh_channelfind);
- if (!c) {
- char *buf = dupprintf("Received channel request for nonexistent"
- " channel %d", localid);
- ssh_disconnect(ssh, NULL, buf, SSH2_DISCONNECT_PROTOCOL_ERROR, FALSE);
- sfree(buf);
- return;
- }
-
- /*
* Having got the channel number, we now look at
* the request type string to see if it's something
* we recognise.
int msglen = 0, core = FALSE;
/* ICK: older versions of OpenSSH (e.g. 3.4p1)
* provide an `int' for the signal, despite its
- * having been a `string' in the drafts since at
+ * having been a `string' in the drafts of RFC 4254 since at
* least 2001. (Fixed in session.c 1.147.) Try to
* infer which we can safely parse it as. */
{
is_plausible = FALSE;
}
}
+ ssh->exitcode = 128; /* means `unknown signal' */
if (is_plausible) {
if (is_int) {
/* Old non-standard OpenSSH. */
int signum = ssh_pkt_getuint32(pktin);
fmt_sig = dupprintf(" %d", signum);
+ ssh->exitcode = 128 + signum;
} else {
- /* As per the drafts. */
+ /* As per RFC 4254. */
char *sig;
int siglen;
ssh_pkt_getstring(pktin, &sig, &siglen);
fmt_sig = dupprintf(" \"%.*s\"",
siglen, sig);
}
+
+ /*
+ * Really hideous method of translating the
+ * signal description back into a locally
+ * meaningful number.
+ */
+
+ if (0)
+ ;
+#define TRANSLATE_SIGNAL(s) \
+ else if (siglen == lenof(#s)-1 && !memcmp(sig, #s, siglen)) \
+ ssh->exitcode = 128 + SIG ## s
+#ifdef SIGABRT
+ TRANSLATE_SIGNAL(ABRT);
+#endif
+#ifdef SIGALRM
+ TRANSLATE_SIGNAL(ALRM);
+#endif
+#ifdef SIGFPE
+ TRANSLATE_SIGNAL(FPE);
+#endif
+#ifdef SIGHUP
+ TRANSLATE_SIGNAL(HUP);
+#endif
+#ifdef SIGILL
+ TRANSLATE_SIGNAL(ILL);
+#endif
+#ifdef SIGINT
+ TRANSLATE_SIGNAL(INT);
+#endif
+#ifdef SIGKILL
+ TRANSLATE_SIGNAL(KILL);
+#endif
+#ifdef SIGPIPE
+ TRANSLATE_SIGNAL(PIPE);
+#endif
+#ifdef SIGQUIT
+ TRANSLATE_SIGNAL(QUIT);
+#endif
+#ifdef SIGSEGV
+ TRANSLATE_SIGNAL(SEGV);
+#endif
+#ifdef SIGTERM
+ TRANSLATE_SIGNAL(TERM);
+#endif
+#ifdef SIGUSR1
+ TRANSLATE_SIGNAL(USR1);
+#endif
+#ifdef SIGUSR2
+ TRANSLATE_SIGNAL(USR2);
+#endif
+#undef TRANSLATE_SIGNAL
+ else
+ ssh->exitcode = 128;
}
core = ssh2_pkt_getbool(pktin);
ssh_pkt_getstring(pktin, &msg, &msglen);
logeventf(ssh, "Rejected channel open: %s", error);
sfree(c);
} else {
- c->localid = alloc_channel_id(ssh);
- c->closes = 0;
- c->v.v2.locwindow = OUR_V2_WINSIZE;
+ ssh2_channel_init(c);
c->v.v2.remwindow = winsize;
c->v.v2.remmaxpkt = pktsize;
- bufchain_init(&c->v.v2.outbuffer);
add234(ssh->channels, c);
pktout = ssh2_pkt_init(SSH2_MSG_CHANNEL_OPEN_CONFIRMATION);
ssh2_pkt_adduint32(pktout, c->remoteid);
} type;
int done_service_req;
int gotit, need_pw, can_pubkey, can_passwd, can_keyb_inter;
- int tried_pubkey_config, tried_agent;
+ int tried_pubkey_config, done_agent;
int kbd_inter_refused;
int we_are_in;
prompts_t *cur_prompt;
int publickey_encrypted;
char *publickey_algorithm;
char *publickey_comment;
- unsigned char request[5], *response, *p;
- int responselen;
+ unsigned char agent_request[5], *agent_response, *agentp;
+ int agent_responselen;
+ unsigned char *pkblob_in_agent;
int keyi, nkeys;
- int authed;
char *pkblob, *alg, *commentp;
int pklen, alglen, commentlen;
int siglen, retlen, len;
}
}
+ /* Arrange to be able to deal with any BANNERs that come in.
+ * (We do this now as packets may come in during the next bit.) */
+ bufchain_init(&ssh->banner);
+ ssh->packet_dispatch[SSH2_MSG_USERAUTH_BANNER] =
+ ssh2_msg_userauth_banner;
+
/*
* Misc one-time setup for authentication.
*/
}
}
+ /*
+ * Find out about any keys Pageant has (but if there's a
+ * public key configured, filter out all others).
+ */
+ s->nkeys = 0;
+ s->agent_response = NULL;
+ s->pkblob_in_agent = NULL;
+ if (ssh->cfg.tryagent && agent_exists()) {
+
+ void *r;
+
+ logevent("Pageant is running. Requesting keys.");
+
+ /* Request the keys held by the agent. */
+ PUT_32BIT(s->agent_request, 1);
+ s->agent_request[4] = SSH2_AGENTC_REQUEST_IDENTITIES;
+ if (!agent_query(s->agent_request, 5, &r, &s->agent_responselen,
+ ssh_agent_callback, ssh)) {
+ do {
+ crReturnV;
+ if (pktin) {
+ bombout(("Unexpected data from server while"
+ " waiting for agent response"));
+ crStopV;
+ }
+ } while (pktin || inlen > 0);
+ r = ssh->agent_response;
+ s->agent_responselen = ssh->agent_response_len;
+ }
+ s->agent_response = (unsigned char *) r;
+ if (s->agent_response && s->agent_responselen >= 5 &&
+ s->agent_response[4] == SSH2_AGENT_IDENTITIES_ANSWER) {
+ int keyi;
+ unsigned char *p;
+ p = s->agent_response + 5;
+ s->nkeys = GET_32BIT(p);
+ p += 4;
+ logeventf(ssh, "Pageant has %d SSH-2 keys", s->nkeys);
+ if (s->publickey_blob) {
+ /* See if configured key is in agent. */
+ for (keyi = 0; keyi < s->nkeys; keyi++) {
+ s->pklen = GET_32BIT(p);
+ if (s->pklen == s->publickey_bloblen &&
+ !memcmp(p+4, s->publickey_blob,
+ s->publickey_bloblen)) {
+ logeventf(ssh, "Pageant key #%d matches "
+ "configured key file", keyi);
+ s->keyi = keyi;
+ s->pkblob_in_agent = p;
+ break;
+ }
+ p += 4 + s->pklen;
+ p += GET_32BIT(p) + 4; /* comment */
+ }
+ if (!s->pkblob_in_agent) {
+ logevent("Configured key file not in Pageant");
+ s->nkeys = 0;
+ }
+ }
+ }
+ }
+
}
/*
*/
s->username[0] = '\0';
s->got_username = FALSE;
- bufchain_init(&ssh->banner);
- ssh->packet_dispatch[SSH2_MSG_USERAUTH_BANNER] =
- ssh2_msg_userauth_banner;
while (!s->we_are_in) {
/*
* Get a username.
* just in case it succeeds, and (b) so that we know what
* authentication methods we can usefully try next.
*/
- ssh->pkt_ctx &= ~SSH2_PKTCTX_AUTH_MASK;
+ ssh->pkt_actx = SSH2_PKTCTX_NOAUTH;
s->pktout = ssh2_pkt_init(SSH2_MSG_USERAUTH_REQUEST);
ssh2_pkt_addstring(s->pktout, s->username);
s->we_are_in = FALSE;
s->tried_pubkey_config = FALSE;
- s->tried_agent = FALSE;
s->kbd_inter_refused = FALSE;
+ /* Reset agent request state. */
+ s->done_agent = FALSE;
+ if (s->agent_response) {
+ if (s->pkblob_in_agent) {
+ s->agentp = s->pkblob_in_agent;
+ } else {
+ s->agentp = s->agent_response + 5 + 4;
+ s->keyi = 0;
+ }
+ }
+
while (1) {
/*
* Wait for the result of the last authentication request.
in_commasep_string("keyboard-interactive", methods, methlen);
}
- ssh->pkt_ctx &= ~SSH2_PKTCTX_AUTH_MASK;
+ ssh->pkt_actx = SSH2_PKTCTX_NOAUTH;
- if (s->can_pubkey && agent_exists() && !s->tried_agent) {
+ if (s->can_pubkey && !s->done_agent && s->nkeys) {
/*
- * Attempt public-key authentication using Pageant.
+ * Attempt public-key authentication using a key from Pageant.
*/
- void *r;
- s->authed = FALSE;
-
- ssh->pkt_ctx &= ~SSH2_PKTCTX_AUTH_MASK;
- ssh->pkt_ctx |= SSH2_PKTCTX_PUBLICKEY;
-
- s->tried_agent = TRUE;
-
- logevent("Pageant is running. Requesting keys.");
-
- /* Request the keys held by the agent. */
- PUT_32BIT(s->request, 1);
- s->request[4] = SSH2_AGENTC_REQUEST_IDENTITIES;
- if (!agent_query(s->request, 5, &r, &s->responselen,
- ssh_agent_callback, ssh)) {
- do {
- crReturnV;
- if (pktin) {
- bombout(("Unexpected data from server while"
- " waiting for agent response"));
- crStopV;
- }
- } while (pktin || inlen > 0);
- r = ssh->agent_response;
- s->responselen = ssh->agent_response_len;
- }
- s->response = (unsigned char *) r;
- if (s->response && s->responselen >= 5 &&
- s->response[4] == SSH2_AGENT_IDENTITIES_ANSWER) {
- s->p = s->response + 5;
- s->nkeys = GET_32BIT(s->p);
- s->p += 4;
- logeventf(ssh, "Pageant has %d SSH-2 keys", s->nkeys);
- for (s->keyi = 0; s->keyi < s->nkeys; s->keyi++) {
- void *vret;
- logeventf(ssh, "Trying Pageant key #%d", s->keyi);
- s->pklen = GET_32BIT(s->p);
- s->p += 4;
- if (s->publickey_blob &&
- s->pklen == s->publickey_bloblen &&
- !memcmp(s->p, s->publickey_blob,
- s->publickey_bloblen)) {
- logevent("This key matches configured key file");
- s->tried_pubkey_config = 1;
- }
- s->pkblob = (char *)s->p;
- s->p += s->pklen;
- s->alglen = GET_32BIT(s->pkblob);
- s->alg = s->pkblob + 4;
- s->commentlen = GET_32BIT(s->p);
- s->p += 4;
- s->commentp = (char *)s->p;
- s->p += s->commentlen;
- s->pktout = ssh2_pkt_init(SSH2_MSG_USERAUTH_REQUEST);
- ssh2_pkt_addstring(s->pktout, s->username);
- ssh2_pkt_addstring(s->pktout, "ssh-connection"); /* service requested */
- ssh2_pkt_addstring(s->pktout, "publickey"); /* method */
- ssh2_pkt_addbool(s->pktout, FALSE); /* no signature included */
- ssh2_pkt_addstring_start(s->pktout);
- ssh2_pkt_addstring_data(s->pktout, s->alg, s->alglen);
- ssh2_pkt_addstring_start(s->pktout);
- ssh2_pkt_addstring_data(s->pktout, s->pkblob, s->pklen);
- ssh2_pkt_send(ssh, s->pktout);
-
- crWaitUntilV(pktin);
- if (pktin->type != SSH2_MSG_USERAUTH_PK_OK) {
- logevent("Key refused");
- continue;
- }
+ ssh->pkt_actx = SSH2_PKTCTX_PUBLICKEY;
- if (flags & FLAG_VERBOSE) {
- c_write_str(ssh, "Authenticating with "
- "public key \"");
- c_write(ssh, s->commentp, s->commentlen);
- c_write_str(ssh, "\" from agent\r\n");
- }
+ logeventf(ssh, "Trying Pageant key #%d", s->keyi);
- /*
- * Server is willing to accept the key.
- * Construct a SIGN_REQUEST.
- */
- s->pktout = ssh2_pkt_init(SSH2_MSG_USERAUTH_REQUEST);
- ssh2_pkt_addstring(s->pktout, s->username);
- ssh2_pkt_addstring(s->pktout, "ssh-connection"); /* service requested */
- ssh2_pkt_addstring(s->pktout, "publickey"); /* method */
- ssh2_pkt_addbool(s->pktout, TRUE);
- ssh2_pkt_addstring_start(s->pktout);
- ssh2_pkt_addstring_data(s->pktout, s->alg, s->alglen);
- ssh2_pkt_addstring_start(s->pktout);
- ssh2_pkt_addstring_data(s->pktout, s->pkblob, s->pklen);
-
- s->siglen = s->pktout->length - 5 + 4 +
- ssh->v2_session_id_len;
- if (ssh->remote_bugs & BUG_SSH2_PK_SESSIONID)
- s->siglen -= 4;
- s->len = 1; /* message type */
- s->len += 4 + s->pklen; /* key blob */
- s->len += 4 + s->siglen; /* data to sign */
- s->len += 4; /* flags */
- s->agentreq = snewn(4 + s->len, char);
- PUT_32BIT(s->agentreq, s->len);
- s->q = s->agentreq + 4;
- *s->q++ = SSH2_AGENTC_SIGN_REQUEST;
- PUT_32BIT(s->q, s->pklen);
- s->q += 4;
- memcpy(s->q, s->pkblob, s->pklen);
- s->q += s->pklen;
- PUT_32BIT(s->q, s->siglen);
+ /* Unpack key from agent response */
+ s->pklen = GET_32BIT(s->agentp);
+ s->agentp += 4;
+ s->pkblob = (char *)s->agentp;
+ s->agentp += s->pklen;
+ s->alglen = GET_32BIT(s->pkblob);
+ s->alg = s->pkblob + 4;
+ s->commentlen = GET_32BIT(s->agentp);
+ s->agentp += 4;
+ s->commentp = (char *)s->agentp;
+ s->agentp += s->commentlen;
+ /* s->agentp now points at next key, if any */
+
+ /* See if server will accept it */
+ s->pktout = ssh2_pkt_init(SSH2_MSG_USERAUTH_REQUEST);
+ ssh2_pkt_addstring(s->pktout, s->username);
+ ssh2_pkt_addstring(s->pktout, "ssh-connection");
+ /* service requested */
+ ssh2_pkt_addstring(s->pktout, "publickey");
+ /* method */
+ ssh2_pkt_addbool(s->pktout, FALSE); /* no signature included */
+ ssh2_pkt_addstring_start(s->pktout);
+ ssh2_pkt_addstring_data(s->pktout, s->alg, s->alglen);
+ ssh2_pkt_addstring_start(s->pktout);
+ ssh2_pkt_addstring_data(s->pktout, s->pkblob, s->pklen);
+ ssh2_pkt_send(ssh, s->pktout);
+ s->type = AUTH_TYPE_PUBLICKEY_OFFER_QUIET;
+
+ crWaitUntilV(pktin);
+ if (pktin->type != SSH2_MSG_USERAUTH_PK_OK) {
+
+ /* Offer of key refused. */
+ s->gotit = TRUE;
+
+ } else {
+
+ void *vret;
+
+ if (flags & FLAG_VERBOSE) {
+ c_write_str(ssh, "Authenticating with "
+ "public key \"");
+ c_write(ssh, s->commentp, s->commentlen);
+ c_write_str(ssh, "\" from agent\r\n");
+ }
+
+ /*
+ * Server is willing to accept the key.
+ * Construct a SIGN_REQUEST.
+ */
+ s->pktout = ssh2_pkt_init(SSH2_MSG_USERAUTH_REQUEST);
+ ssh2_pkt_addstring(s->pktout, s->username);
+ ssh2_pkt_addstring(s->pktout, "ssh-connection");
+ /* service requested */
+ ssh2_pkt_addstring(s->pktout, "publickey");
+ /* method */
+ ssh2_pkt_addbool(s->pktout, TRUE); /* signature included */
+ ssh2_pkt_addstring_start(s->pktout);
+ ssh2_pkt_addstring_data(s->pktout, s->alg, s->alglen);
+ ssh2_pkt_addstring_start(s->pktout);
+ ssh2_pkt_addstring_data(s->pktout, s->pkblob, s->pklen);
+
+ /* Ask agent for signature. */
+ s->siglen = s->pktout->length - 5 + 4 +
+ ssh->v2_session_id_len;
+ if (ssh->remote_bugs & BUG_SSH2_PK_SESSIONID)
+ s->siglen -= 4;
+ s->len = 1; /* message type */
+ s->len += 4 + s->pklen; /* key blob */
+ s->len += 4 + s->siglen; /* data to sign */
+ s->len += 4; /* flags */
+ s->agentreq = snewn(4 + s->len, char);
+ PUT_32BIT(s->agentreq, s->len);
+ s->q = s->agentreq + 4;
+ *s->q++ = SSH2_AGENTC_SIGN_REQUEST;
+ PUT_32BIT(s->q, s->pklen);
+ s->q += 4;
+ memcpy(s->q, s->pkblob, s->pklen);
+ s->q += s->pklen;
+ PUT_32BIT(s->q, s->siglen);
+ s->q += 4;
+ /* Now the data to be signed... */
+ if (!(ssh->remote_bugs & BUG_SSH2_PK_SESSIONID)) {
+ PUT_32BIT(s->q, ssh->v2_session_id_len);
s->q += 4;
- /* Now the data to be signed... */
- if (!(ssh->remote_bugs & BUG_SSH2_PK_SESSIONID)) {
- PUT_32BIT(s->q, ssh->v2_session_id_len);
- s->q += 4;
- }
- memcpy(s->q, ssh->v2_session_id,
- ssh->v2_session_id_len);
- s->q += ssh->v2_session_id_len;
- memcpy(s->q, s->pktout->data + 5,
- s->pktout->length - 5);
- s->q += s->pktout->length - 5;
- /* And finally the (zero) flags word. */
- PUT_32BIT(s->q, 0);
- if (!agent_query(s->agentreq, s->len + 4,
- &vret, &s->retlen,
- ssh_agent_callback, ssh)) {
- do {
- crReturnV;
- if (pktin) {
- bombout(("Unexpected data from server"
- " while waiting for agent"
- " response"));
- crStopV;
- }
- } while (pktin || inlen > 0);
- vret = ssh->agent_response;
- s->retlen = ssh->agent_response_len;
- }
- s->ret = vret;
- sfree(s->agentreq);
- if (s->ret) {
- if (s->ret[4] == SSH2_AGENT_SIGN_RESPONSE) {
- logevent("Sending Pageant's response");
- ssh2_add_sigblob(ssh, s->pktout,
- s->pkblob, s->pklen,
- s->ret + 9,
- GET_32BIT(s->ret + 5));
- ssh2_pkt_send(ssh, s->pktout);
- s->authed = TRUE;
- break;
- } else {
- logevent
- ("Pageant failed to answer challenge");
- sfree(s->ret);
+ }
+ memcpy(s->q, ssh->v2_session_id,
+ ssh->v2_session_id_len);
+ s->q += ssh->v2_session_id_len;
+ memcpy(s->q, s->pktout->data + 5,
+ s->pktout->length - 5);
+ s->q += s->pktout->length - 5;
+ /* And finally the (zero) flags word. */
+ PUT_32BIT(s->q, 0);
+ if (!agent_query(s->agentreq, s->len + 4,
+ &vret, &s->retlen,
+ ssh_agent_callback, ssh)) {
+ do {
+ crReturnV;
+ if (pktin) {
+ bombout(("Unexpected data from server"
+ " while waiting for agent"
+ " response"));
+ crStopV;
}
+ } while (pktin || inlen > 0);
+ vret = ssh->agent_response;
+ s->retlen = ssh->agent_response_len;
+ }
+ s->ret = vret;
+ sfree(s->agentreq);
+ if (s->ret) {
+ if (s->ret[4] == SSH2_AGENT_SIGN_RESPONSE) {
+ logevent("Sending Pageant's response");
+ ssh2_add_sigblob(ssh, s->pktout,
+ s->pkblob, s->pklen,
+ s->ret + 9,
+ GET_32BIT(s->ret + 5));
+ ssh2_pkt_send(ssh, s->pktout);
+ s->type = AUTH_TYPE_PUBLICKEY;
+ } else {
+ /* FIXME: less drastic response */
+ bombout(("Pageant failed to answer challenge"));
+ crStopV;
}
}
- if (s->authed)
- continue;
}
- sfree(s->response);
+
+ /* Do we have any keys left to try? */
+ if (s->pkblob_in_agent) {
+ s->done_agent = TRUE;
+ s->tried_pubkey_config = TRUE;
+ } else {
+ s->keyi++;
+ if (s->keyi >= s->nkeys)
+ s->done_agent = TRUE;
+ }
} else if (s->can_pubkey && s->publickey_blob &&
!s->tried_pubkey_config) {
struct ssh2_userkey *key; /* not live over crReturn */
char *passphrase; /* not live over crReturn */
- ssh->pkt_ctx &= ~SSH2_PKTCTX_AUTH_MASK;
- ssh->pkt_ctx |= SSH2_PKTCTX_PUBLICKEY;
+ ssh->pkt_actx = SSH2_PKTCTX_PUBLICKEY;
s->tried_pubkey_config = TRUE;
s->type = AUTH_TYPE_KEYBOARD_INTERACTIVE;
- ssh->pkt_ctx &= ~SSH2_PKTCTX_AUTH_MASK;
- ssh->pkt_ctx |= SSH2_PKTCTX_KBDINTER;
+ ssh->pkt_actx = SSH2_PKTCTX_KBDINTER;
s->pktout = ssh2_pkt_init(SSH2_MSG_USERAUTH_REQUEST);
ssh2_pkt_addstring(s->pktout, s->username);
* Send the responses to the server.
*/
s->pktout = ssh2_pkt_init(SSH2_MSG_USERAUTH_INFO_RESPONSE);
- s->pktout->forcepad = 256;
ssh2_pkt_adduint32(s->pktout, s->num_prompts);
for (i=0; i < s->num_prompts; i++) {
dont_log_password(ssh, s->pktout, PKTLOG_BLANK);
s->cur_prompt->prompts[i]->result);
end_log_omission(ssh, s->pktout);
}
- ssh2_pkt_send(ssh, s->pktout);
+ ssh2_pkt_send_with_padding(ssh, s->pktout, 256);
/*
* Get the next packet in case it's another
int ret; /* not live over crReturn */
int changereq_first_time; /* not live over crReturn */
- ssh->pkt_ctx &= ~SSH2_PKTCTX_AUTH_MASK;
- ssh->pkt_ctx |= SSH2_PKTCTX_PASSWORD;
+ ssh->pkt_actx = SSH2_PKTCTX_PASSWORD;
s->cur_prompt = new_prompts(ssh->frontend);
s->cur_prompt->to_server = TRUE;
* people who find out how long their password is!
*/
s->pktout = ssh2_pkt_init(SSH2_MSG_USERAUTH_REQUEST);
- s->pktout->forcepad = 256;
ssh2_pkt_addstring(s->pktout, s->username);
ssh2_pkt_addstring(s->pktout, "ssh-connection");
/* service requested */
dont_log_password(ssh, s->pktout, PKTLOG_BLANK);
ssh2_pkt_addstring(s->pktout, s->password);
end_log_omission(ssh, s->pktout);
- ssh2_pkt_send(ssh, s->pktout);
+ ssh2_pkt_send_with_padding(ssh, s->pktout, 256);
logevent("Sent password");
s->type = AUTH_TYPE_PASSWORD;
s->cur_prompt->instruction =
dupprintf("%.*s", prompt_len, prompt);
s->cur_prompt->instr_reqd = TRUE;
+ /*
+ * There's no explicit requirement in the protocol
+ * for the "old" passwords in the original and
+ * password-change messages to be the same, and
+ * apparently some Cisco kit supports password change
+ * by the user entering a blank password originally
+ * and the real password subsequently, so,
+ * reluctantly, we prompt for the old password again.
+ *
+ * (On the other hand, some servers don't even bother
+ * to check this field.)
+ */
+ add_prompt(s->cur_prompt,
+ dupstr("Current password (blank for previously entered password): "),
+ FALSE, SSH_MAX_PASSWORD_LEN);
add_prompt(s->cur_prompt, dupstr("Enter new password: "),
FALSE, SSH_MAX_PASSWORD_LEN);
add_prompt(s->cur_prompt, dupstr("Confirm new password: "),
}
/*
- * Check the two passwords match.
+ * If the user specified a new original password
+ * (IYSWIM), overwrite any previously specified
+ * one.
+ * (A side effect is that the user doesn't have to
+ * re-enter it if they louse up the new password.)
*/
- got_new = (strcmp(s->cur_prompt->prompts[0]->result,
- s->cur_prompt->prompts[1]->result)
+ if (s->cur_prompt->prompts[0]->result[0]) {
+ memset(s->password, 0, strlen(s->password));
+ /* burn the evidence */
+ sfree(s->password);
+ s->password =
+ dupstr(s->cur_prompt->prompts[0]->result);
+ }
+
+ /*
+ * Check the two new passwords match.
+ */
+ got_new = (strcmp(s->cur_prompt->prompts[1]->result,
+ s->cur_prompt->prompts[2]->result)
== 0);
if (!got_new)
/* They don't. Silly user. */
* (see above for padding rationale)
*/
s->pktout = ssh2_pkt_init(SSH2_MSG_USERAUTH_REQUEST);
- s->pktout->forcepad = 256;
ssh2_pkt_addstring(s->pktout, s->username);
ssh2_pkt_addstring(s->pktout, "ssh-connection");
/* service requested */
dont_log_password(ssh, s->pktout, PKTLOG_BLANK);
ssh2_pkt_addstring(s->pktout, s->password);
ssh2_pkt_addstring(s->pktout,
- s->cur_prompt->prompts[0]->result);
+ s->cur_prompt->prompts[1]->result);
free_prompts(s->cur_prompt);
end_log_omission(ssh, s->pktout);
- ssh2_pkt_send(ssh, s->pktout);
+ ssh2_pkt_send_with_padding(ssh, s->pktout, 256);
logevent("Sent new password");
/*
sfree(s->publickey_blob);
sfree(s->publickey_comment);
}
+ if (s->agent_response)
+ sfree(s->agent_response);
/*
* Now the connection protocol has started, one way or another.
/*
* Create the main session channel.
*/
- if (!ssh->cfg.ssh_no_shell) {
+ if (ssh->cfg.ssh_no_shell) {
+ ssh->mainchan = NULL;
+ } else if (*ssh->cfg.ssh_nc_host) {
+ /*
+ * Just start a direct-tcpip channel and use it as the main
+ * channel.
+ */
ssh->mainchan = snew(struct ssh_channel);
ssh->mainchan->ssh = ssh;
- ssh->mainchan->localid = alloc_channel_id(ssh);
+ ssh2_channel_init(ssh->mainchan);
+ logeventf(ssh,
+ "Opening direct-tcpip channel to %s:%d in place of session",
+ ssh->cfg.ssh_nc_host, ssh->cfg.ssh_nc_port);
+ s->pktout = ssh2_pkt_init(SSH2_MSG_CHANNEL_OPEN);
+ ssh2_pkt_addstring(s->pktout, "direct-tcpip");
+ ssh2_pkt_adduint32(s->pktout, ssh->mainchan->localid);
+ ssh2_pkt_adduint32(s->pktout, ssh->mainchan->v.v2.locwindow);/* our window size */
+ ssh2_pkt_adduint32(s->pktout, OUR_V2_MAXPKT); /* our max pkt size */
+ ssh2_pkt_addstring(s->pktout, ssh->cfg.ssh_nc_host);
+ ssh2_pkt_adduint32(s->pktout, ssh->cfg.ssh_nc_port);
+ /*
+ * There's nothing meaningful to put in the originator
+ * fields, but some servers insist on syntactically correct
+ * information.
+ */
+ ssh2_pkt_addstring(s->pktout, "0.0.0.0");
+ ssh2_pkt_adduint32(s->pktout, 0);
+ ssh2_pkt_send(ssh, s->pktout);
+
+ crWaitUntilV(pktin);
+ if (pktin->type != SSH2_MSG_CHANNEL_OPEN_CONFIRMATION) {
+ bombout(("Server refused to open a direct-tcpip channel"));
+ crStopV;
+ /* FIXME: error data comes back in FAILURE packet */
+ }
+ if (ssh_pkt_getuint32(pktin) != ssh->mainchan->localid) {
+ bombout(("Server's channel confirmation cited wrong channel"));
+ crStopV;
+ }
+ ssh->mainchan->remoteid = ssh_pkt_getuint32(pktin);
+ ssh->mainchan->halfopen = FALSE;
+ ssh->mainchan->type = CHAN_MAINSESSION;
+ ssh->mainchan->v.v2.remwindow = ssh_pkt_getuint32(pktin);
+ ssh->mainchan->v.v2.remmaxpkt = ssh_pkt_getuint32(pktin);
+ add234(ssh->channels, ssh->mainchan);
+ update_specials_menu(ssh->frontend);
+ logevent("Opened direct-tcpip channel");
+ ssh->ncmode = TRUE;
+ } else {
+ ssh->mainchan = snew(struct ssh_channel);
+ ssh->mainchan->ssh = ssh;
+ ssh2_channel_init(ssh->mainchan);
s->pktout = ssh2_pkt_init(SSH2_MSG_CHANNEL_OPEN);
ssh2_pkt_addstring(s->pktout, "session");
ssh2_pkt_adduint32(s->pktout, ssh->mainchan->localid);
- ssh->mainchan->v.v2.locwindow = OUR_V2_WINSIZE;
ssh2_pkt_adduint32(s->pktout, ssh->mainchan->v.v2.locwindow);/* our window size */
ssh2_pkt_adduint32(s->pktout, OUR_V2_MAXPKT); /* our max pkt size */
ssh2_pkt_send(ssh, s->pktout);
ssh->mainchan->remoteid = ssh_pkt_getuint32(pktin);
ssh->mainchan->halfopen = FALSE;
ssh->mainchan->type = CHAN_MAINSESSION;
- ssh->mainchan->closes = 0;
ssh->mainchan->v.v2.remwindow = ssh_pkt_getuint32(pktin);
ssh->mainchan->v.v2.remmaxpkt = ssh_pkt_getuint32(pktin);
- bufchain_init(&ssh->mainchan->v.v2.outbuffer);
add234(ssh->channels, ssh->mainchan);
update_specials_menu(ssh->frontend);
logevent("Opened channel for session");
- } else
- ssh->mainchan = NULL;
+ ssh->ncmode = FALSE;
+ }
/*
* Now we have a channel, make dispatch table entries for
ssh->packet_dispatch[SSH2_MSG_CHANNEL_OPEN] =
ssh2_msg_channel_open;
+ if (ssh->cfg.ssh_simple) {
+ /*
+ * This message indicates to the server that we promise
+ * not to try to run any other channel in parallel with
+ * this one, so it's safe for it to advertise a very large
+ * window and leave the flow control to TCP.
+ */
+ s->pktout = ssh2_pkt_init(SSH2_MSG_CHANNEL_REQUEST);
+ ssh2_pkt_adduint32(s->pktout, ssh->mainchan->remoteid);
+ ssh2_pkt_addstring(s->pktout, "simple@putty.projects.tartarus.org");
+ ssh2_pkt_addbool(s->pktout, 0); /* no reply */
+ ssh2_pkt_send(ssh, s->pktout);
+ }
+
/*
* Potentially enable X11 forwarding.
*/
- if (ssh->mainchan && ssh->cfg.x11_forward) {
+ if (ssh->mainchan && !ssh->ncmode && ssh->cfg.x11_forward) {
char proto[20], data[64];
logevent("Requesting X11 forwarding");
ssh->x11auth = x11_invent_auth(proto, sizeof(proto),
/*
* Potentially enable agent forwarding.
*/
- if (ssh->mainchan && ssh->cfg.agentfwd && agent_exists()) {
+ if (ssh->mainchan && !ssh->ncmode && ssh->cfg.agentfwd && agent_exists()) {
logevent("Requesting OpenSSH-style agent forwarding");
s->pktout = ssh2_pkt_init(SSH2_MSG_CHANNEL_REQUEST);
ssh2_pkt_adduint32(s->pktout, ssh->mainchan->remoteid);
/*
* Now allocate a pty for the session.
*/
- if (ssh->mainchan && !ssh->cfg.nopty) {
+ if (ssh->mainchan && !ssh->ncmode && !ssh->cfg.nopty) {
/* Unpick the terminal-speed string. */
/* XXX perhaps we should allow no speeds to be sent. */
ssh->ospeed = 38400; ssh->ispeed = 38400; /* last-resort defaults */
* Simplest thing here is to send all the requests at once, and
* then wait for a whole bunch of successes or failures.
*/
- if (ssh->mainchan && *ssh->cfg.environmt) {
+ if (ssh->mainchan && !ssh->ncmode && *ssh->cfg.environmt) {
char *e = ssh->cfg.environmt;
char *var, *varend, *val;
* this twice if the config data has provided a second choice
* of command.
*/
- if (ssh->mainchan) while (1) {
+ if (ssh->mainchan && !ssh->ncmode) while (1) {
int subsys;
char *cmd;
ssh_special(ssh, TS_EOF);
/*
+ * All the initial channel requests are done, so install the default
+ * failure handler.
+ */
+ ssh->packet_dispatch[SSH2_MSG_CHANNEL_SUCCESS] = ssh2_msg_channel_success;
+ ssh->packet_dispatch[SSH2_MSG_CHANNEL_FAILURE] = ssh2_msg_channel_failure;
+
+ /*
* Transfer data!
*/
if (ssh->ldisc)
ssh->deferred_len = 0;
ssh->deferred_size = 0;
ssh->fallback_cmd = 0;
- ssh->pkt_ctx = 0;
+ ssh->pkt_kctx = SSH2_PKTCTX_NOKEX;
+ ssh->pkt_actx = SSH2_PKTCTX_NOAUTH;
ssh->x11auth = NULL;
ssh->v1_compressing = FALSE;
ssh->v2_outgoing_sequence = 0;
ssh->send_ok = 0;
ssh->editing = 0;
ssh->echoing = 0;
- ssh->v1_throttle_count = 0;
+ ssh->conn_throttle_count = 0;
ssh->overall_bufsize = 0;
ssh->fallback_cmd = 0;
static const struct telnet_special ssh2_session_specials[] = {
{NULL, TS_SEP},
{"Break", TS_BRK},
- /* These are the signal names defined by draft-ietf-secsh-connect-23.
+ /* These are the signal names defined by RFC 4254.
* They include all the ISO C signals, but are a subset of the POSIX
* required signals. */
{"SIGINT (Interrupt)", TS_SIGINT},
Ssh ssh = (Ssh) handle;
struct ssh_channel *c;
c = snew(struct ssh_channel);
- c->ssh = ssh;
- if (c) {
- c->halfopen = TRUE;
- c->localid = alloc_channel_id(ssh);
- c->closes = 0;
- c->type = CHAN_SOCKDATA_DORMANT;/* identify channel type */
- c->u.pfd.s = s;
- bufchain_init(&c->v.v2.outbuffer);
- add234(ssh->channels, c);
- }
+ c->ssh = ssh;
+ ssh2_channel_init(c);
+ c->halfopen = TRUE;
+ c->type = CHAN_SOCKDATA_DORMANT;/* identify channel type */
+ c->u.pfd.s = s;
+ add234(ssh->channels, c);
return c;
}
static void ssh_unthrottle(void *handle, int bufsize)
{
Ssh ssh = (Ssh) handle;
+ int buflimit;
+
if (ssh->version == 1) {
if (ssh->v1_stdout_throttling && bufsize < SSH1_BUFFER_LIMIT) {
ssh->v1_stdout_throttling = 0;
- ssh1_throttle(ssh, -1);
+ ssh_throttle_conn(ssh, -1);
}
} else {
- if (ssh->mainchan && ssh->mainchan->closes == 0)
- ssh2_set_window(ssh->mainchan, OUR_V2_WINSIZE - bufsize);
+ if (ssh->mainchan) {
+ ssh2_set_window(ssh->mainchan,
+ bufsize < ssh->mainchan->v.v2.locmaxwin ?
+ ssh->mainchan->v.v2.locmaxwin - bufsize : 0);
+ if (ssh->cfg.ssh_simple)
+ buflimit = 0;
+ else
+ buflimit = ssh->mainchan->v.v2.locmaxwin;
+ if (ssh->mainchan->throttling_conn && bufsize <= buflimit) {
+ ssh->mainchan->throttling_conn = 0;
+ ssh_throttle_conn(ssh, -1);
+ }
+ }
}
}
pktout = ssh2_pkt_init(SSH2_MSG_CHANNEL_OPEN);
ssh2_pkt_addstring(pktout, "direct-tcpip");
ssh2_pkt_adduint32(pktout, c->localid);
- c->v.v2.locwindow = OUR_V2_WINSIZE;
ssh2_pkt_adduint32(pktout, c->v.v2.locwindow);/* our window size */
ssh2_pkt_adduint32(pktout, OUR_V2_MAXPKT); /* our max pkt size */
ssh2_pkt_addstring(pktout, hostname);
* too much hassle to keep track, and partly I'm not
* convinced the server should be told details like that
* about my local network configuration.
+ * The "originator IP address" is syntactically a numeric
+ * IP address, and some servers (e.g., Tectia) get upset
+ * if it doesn't match this syntax.
*/
- ssh2_pkt_addstring(pktout, "client-side-connection");
+ ssh2_pkt_addstring(pktout, "0.0.0.0");
ssh2_pkt_adduint32(pktout, 0);
ssh2_pkt_send(ssh, pktout);
}
}
-static Socket ssh_socket(void *handle)
+static int ssh_connected(void *handle)
{
Ssh ssh = (Ssh) handle;
- return ssh->s;
+ return ssh->s != NULL;
}
static int ssh_sendok(void *handle)
if (ssh->s != NULL)
return -1;
else
- return (ssh->exitcode >= 0 ? ssh->exitcode : 0);
+ return (ssh->exitcode >= 0 ? ssh->exitcode : INT_MAX);
}
/*
ssh_size,
ssh_special,
ssh_get_specials,
- ssh_socket,
+ ssh_connected,
ssh_return_exitcode,
ssh_sendok,
ssh_ldisc,
ssh_provide_logctx,
ssh_unthrottle,
ssh_cfg_info,
+ "ssh",
+ PROT_SSH,
22
};