Unix can't sensibly enumerate printers (since they're defined as

[sgt/putty] / unix / uxucs.c

#include <stdio.h>
#include <stdlib.h>
#include <ctype.h>
#include <locale.h>
#include <limits.h>
#include <wchar.h>

#include <time.h>

#include "putty.h"
#include "terminal.h"
#include "misc.h"

/*
 * Unix Unicode-handling routines.
 */

int is_dbcs_leadbyte(int codepage, char byte)
{
    return 0;			       /* we don't do DBCS */
}

int mb_to_wc(int codepage, int flags, char *mbstr, int mblen,
	     wchar_t *wcstr, int wclen)
{
    if (codepage == DEFAULT_CODEPAGE) {
	int n = 0;
	mbstate_t state = { 0 };

	setlocale(LC_CTYPE, "");

	while (mblen > 0) {
	    size_t i = mbrtowc(wcstr+n, mbstr, (size_t)mblen, &state);
	    if (i == (size_t)-1 || i == (size_t)-2)
		break;
	    n++;
	    mbstr += i;
	    mblen -= i;
	}

	setlocale(LC_CTYPE, "C");

	return n;
    } else if (codepage == CS_NONE) {
	int n = 0;

	while (mblen > 0) {
	    wcstr[n] = 0xD800 | (mbstr[0] & 0xFF);
	    n++;
	    mbstr++;
	    mblen--;
	}

	return n;
    } else
	return charset_to_unicode(&mbstr, &mblen, wcstr, wclen, codepage,
				  NULL, NULL, 0);
}

int wc_to_mb(int codepage, int flags, wchar_t *wcstr, int wclen,
	     char *mbstr, int mblen, char *defchr, int *defused,
	     struct unicode_data *ucsdata)
{
    /* FIXME: we should remove the defused param completely... */
    if (defused)
	*defused = 0;

    if (codepage == DEFAULT_CODEPAGE) {
	char output[MB_LEN_MAX];
	mbstate_t state = { 0 };
	int n = 0;

	setlocale(LC_CTYPE, "");

	while (wclen > 0) {
	    int i = wcrtomb(output, wcstr[0], &state);
	    if (i == (size_t)-1 || i > n - mblen)
		break;
	    memcpy(mbstr+n, output, i);
	    n += i;
	    wcstr++;
	    wclen--;
	}

	setlocale(LC_CTYPE, "C");

	return n;
    } else if (codepage == CS_NONE) {
	int n = 0;
	while (wclen > 0 && n < mblen) {
	    if (*wcstr >= 0xD800 && *wcstr < 0xD900)
		mbstr[n++] = (*wcstr & 0xFF);
	    else if (defchr)
		mbstr[n++] = *defchr;
	    wcstr++;
	    wclen--;
	}
	return n;
    } else {
	return charset_from_unicode(&wcstr, &wclen, mbstr, mblen, codepage,
				    NULL, defchr?defchr:NULL, defchr?1:0);
    }
}

/*
 * Return value is TRUE if pterm is to run in direct-to-font mode.
 */
int init_ucs(struct unicode_data *ucsdata, 
	     char *linecharset, int font_charset)
{
    int i, ret = 0;

    /*
     * In the platform-independent parts of the code, font_codepage
     * is used only for system DBCS support - which we don't
     * support at all. So we set this to something which will never
     * be used.
     */
    ucsdata->font_codepage = -1;

    /*
     * line_codepage should be decoded from the specification in
     * cfg.
     */
    ucsdata->line_codepage = charset_from_mimeenc(linecharset);
    if (ucsdata->line_codepage == CS_NONE)
	ucsdata->line_codepage = charset_from_xenc(linecharset);

    /*
     * If line_codepage is _still_ CS_NONE, we assume we're using
     * the font's own encoding. This has been passed in to us, so
     * we use that. If it's still CS_NONE after _that_ - i.e. the
     * font we were given had an incomprehensible charset - then we
     * fall back to using the D800 page.
     */
    if (ucsdata->line_codepage == CS_NONE)
	ucsdata->line_codepage = font_charset;

    if (ucsdata->line_codepage == CS_NONE)
	ret = 1;

    /*
     * Set up unitab_line, by translating each individual character
     * in the line codepage into Unicode.
     */
    for (i = 0; i < 256; i++) {
	char c[1], *p;
	wchar_t wc[1];
	int len;
	c[0] = i;
	p = c;
	len = 1;
	if (ucsdata->line_codepage == CS_NONE)
	    ucsdata->unitab_line[i] = 0xD800 | i;
	else if (1 == charset_to_unicode(&p, &len, wc, 1,
					 ucsdata->line_codepage,
					 NULL, L"", 0))
	    ucsdata->unitab_line[i] = wc[0];
	else
	    ucsdata->unitab_line[i] = 0xFFFD;
    }

    /*
     * Set up unitab_xterm. This is the same as unitab_line except
     * in the line-drawing regions, where it follows the Unicode
     * encoding.
     * 
     * (Note that the strange X encoding of line-drawing characters
     * in the bottom 32 glyphs of ISO8859-1 fonts is taken care of
     * by the font encoding, which will spot such a font and act as
     * if it were in a variant encoding of ISO8859-1.)
     */
    for (i = 0; i < 256; i++) {
	static const wchar_t unitab_xterm_std[32] = {
	    0x2666, 0x2592, 0x2409, 0x240c, 0x240d, 0x240a, 0x00b0, 0x00b1,
	    0x2424, 0x240b, 0x2518, 0x2510, 0x250c, 0x2514, 0x253c, 0x23ba,
	    0x23bb, 0x2500, 0x23bc, 0x23bd, 0x251c, 0x2524, 0x2534, 0x252c,
	    0x2502, 0x2264, 0x2265, 0x03c0, 0x2260, 0x00a3, 0x00b7, 0x0020
	};
	if (i >= 0x5F && i < 0x7F)
	    ucsdata->unitab_xterm[i] = unitab_xterm_std[i & 0x1F];
	else
	    ucsdata->unitab_xterm[i] = ucsdata->unitab_line[i];
    }

    /*
     * Set up unitab_scoacs. The SCO Alternate Character Set is
     * simply CP437.
     */
    for (i = 0; i < 256; i++) {
	char c[1], *p;
	wchar_t wc[1];
	int len;
	c[0] = i;
	p = c;
	len = 1;
	if (1 == charset_to_unicode(&p, &len, wc, 1, CS_CP437, NULL, L"", 0))
	    ucsdata->unitab_scoacs[i] = wc[0];
	else
	    ucsdata->unitab_scoacs[i] = 0xFFFD;
    }

    /*
     * Find the control characters in the line codepage. For
     * direct-to-font mode using the D800 hack, we assume 00-1F and
     * 7F are controls, but allow 80-9F through. (It's as good a
     * guess as anything; and my bet is that half the weird fonts
     * used in this way will be IBM or MS code pages anyway.)
     */
    for (i = 0; i < 256; i++) {
	int lineval = ucsdata->unitab_line[i];
	if (lineval < ' ' || (lineval >= 0x7F && lineval < 0xA0) ||
	    (lineval >= 0xD800 && lineval < 0xD820) || (lineval == 0xD87F))
	    ucsdata->unitab_ctrl[i] = i;
	else
	    ucsdata->unitab_ctrl[i] = 0xFF;
    }

    return ret;
}