Missing index modifiers

[sgt/halibut] / doc / output.but

diff --git a/doc/output.but b/doc/output.but
index 24042f2..35613ca 100644 (file)
--- a/doc/output.but
+++ b/doc/output.but
@@ -1,3 +1,5 @@
+\versionid $Id$
+

 \C{output} Halibut output formats
 
 This chapter describes each of Halibut's current \i{output formats}.
 \C{output} Halibut output formats
 
 This chapter describes each of Halibut's current \i{output formats}.


@@ -8,7 +10,7 @@ that format.
 \H{output-text} Plain text
 
 This output format generates the document as a single \i{plain text}
 \H{output-text} Plain text
 
 This output format generates the document as a single \i{plain text}

-file. No index is generated.
+file. No table of contents or index is generated.

 
 The precise formatting of the text file can be controlled by a
 variety of configuration directives. They are listed in the
 
 The precise formatting of the text file can be controlled by a
 variety of configuration directives. They are listed in the


@@ -144,7 +146,7 @@ be prefixed by \q{Chapter} or equivalent.
 
 \dd This specifies the suffix text to be appended to the chapter
 number, before displaying the chapter title. For example, if you set
 
 \dd This specifies the suffix text to be appended to the chapter
 number, before displaying the chapter title. For example, if you set

-this to \q{\cw{:\_}}, then the chapter title might look something
+this to \cq{:\_}, then the chapter title might look something

 like \q{Chapter 2: Doing Things}.
 
 \dt \I{\cw{\\cfg\{text-section-align\}}}\cw{\\cfg\{text-section-align\}\{}\e{level}\cw{\}\{}\e{alignment}\cw{\}}
 like \q{Chapter 2: Doing Things}.
 
 \dt \I{\cw{\\cfg\{text-section-align\}}}\cw{\\cfg\{text-section-align\}\{}\e{level}\cw{\}\{}\e{alignment}\cw{\}}


@@ -215,7 +217,7 @@ and resort to the ASCII asterisk if all else failed.
 \i{horizontal rules} (generated by \i\c{\\rule}; see
 \k{input-rule}). It can be one character, or more than one. The
 string you specify will be repeated to reach the required width, so
 \i{horizontal rules} (generated by \i\c{\\rule}; see
 \k{input-rule}). It can be one character, or more than one. The
 string you specify will be repeated to reach the required width, so

-you can specify something like \q{\cw{-=}} to get a rule that looks
+you can specify something like \cq{-=} to get a rule that looks

 like \cw{-=-=-=}.
 
 \lcont{
 like \cw{-=-=-=}.
 
 \lcont{


@@ -328,13 +330,12 @@ between HTML files using the configuration commands described in
 this section. In particular, you can configure Halibut to output one
 single HTML file instead of multiple ones.
 
 this section. In particular, you can configure Halibut to output one
 single HTML file instead of multiple ones.
 

-Strictly speaking, the output format is \i{XHTML} 1.0 Transitional,
-which is why all of the configuration directives start with the word
-\c{xhtml} rather than \c{html}.
+\I{\cw{\\cfg\{xhtml-anything\}}}Configuration directives with an
+\c{xhtml-} prefix are synonyms for those with an \c{html-} prefix.

 
 \S{output-html-file} Controlling the output file names
 
 
 \S{output-html-file} Controlling the output file names
 

-\dt \I{\cw{\\cfg\{xhtml-contents-filename\}}}\cw{\\cfg\{xhtml-contents-filename\}\{}\e{filename}\cw{\}}
+\dt \I{\cw{\\cfg\{html-contents-filename\}}}\cw{\\cfg\{html-contents-filename\}\{}\e{filename}\cw{\}}

 
 \dd Sets the \i{output file name} in which to store the top-level
 contents page. Since this is the first page a user ought to see when
 
 \dd Sets the \i{output file name} in which to store the top-level
 contents page. Since this is the first page a user ought to see when


@@ -342,11 +343,11 @@ beginning to read the document, a good choice in many cases might be
 \c{index.html} (although this is not the default, for historical
 reasons).
 
 \c{index.html} (although this is not the default, for historical
 reasons).
 

-\dt \I{\cw{\\cfg\{xhtml-index-filename\}}}\cw{\\cfg\{xhtml-index-filename\}\{}\e{filename}\cw{\}}
+\dt \I{\cw{\\cfg\{html-index-filename\}}}\cw{\\cfg\{html-index-filename\}\{}\e{filename}\cw{\}}

 
 \dd Sets the file name in which to store the document's index.
 
 
 \dd Sets the file name in which to store the document's index.
 

-\dt \I{\cw{\\cfg\{xhtml-template-filename\}}}\cw{\\cfg\{xhtml-template-filename\}\{}\e{template}\cw{\}}
+\dt \I{\cw{\\cfg\{html-template-filename\}}}\cw{\\cfg\{html-template-filename\}\{}\e{template}\cw{\}}

 
 \dd Provides a \i{template} to be used when constructing the file
 names of each chapter or section of the document. This template
 
 \dd Provides a \i{template} to be used when constructing the file
 names of each chapter or section of the document. This template


@@ -361,47 +362,48 @@ The formatting commands used in this template are:
 \dt \I{%N-upper}\c{%N}
 
 \dd Expands to the visible title of the section, with white space
 \dt \I{%N-upper}\c{%N}
 
 \dd Expands to the visible title of the section, with white space

-removed. So in a chapter declared as \q{\cw{\\C\{fish\} Catching
-Fish}}, this formatting command would expand to
-\q{\cw{CatchingFish}}.
+removed. So in a chapter declared as \cq{\\C\{fish\} Catching
+Fish}, this formatting command would expand to
+\cq{CatchingFish}.

 
 \dt \i\c{%n}
 
 \dd Expands to the type and number of the section, without white
 
 \dt \i\c{%n}
 
 \dd Expands to the type and number of the section, without white

-space. So in chapter 1 this would expand to \q{\cw{Chapter1}}; in
-section A.4.3 it would expand to \q{\cw{SectionA.4.3}}, and so on.
+space. So in chapter 1 this would expand to \cq{Chapter1}; in
+section A.4.3 it would expand to \cq{SectionA.4.3}, and so on.

 If the section has no number (an unnumbered chapter created using
 \c{\\U}), this directive falls back to doing the same thing as
 \c{%N}.
 
 \dt \i\c{%b}
 
 If the section has no number (an unnumbered chapter created using
 \c{\\U}), this directive falls back to doing the same thing as
 \c{%N}.
 
 \dt \i\c{%b}
 

-\dd Expands to the bare number of the section. So in chapter 1 this
-would expand to \q{\cw{1}}; in section A.4.3 it would expand to
-\q{\cw{A.4.3}}, and so on. If the section has no number (an
-unnumbered chapter created using \c{\\U}), this directive falls back
-to doing the same thing as \c{%N}.
+\dd Expands to the number of the section, in a format suitable for an
+HTML fragment name. The first character of the section type is
+prepended to the section number. So in chapter 1 this would expand to
+\cq{C1}; in section A.4.3 it would expand to \cq{SA.4.3}, and so on.
+If the section has no number (an unnumbered chapter created using
+\c{\\U}), this directive falls back to doing the same thing as \c{%N}.

 
 \dt \i\c{%k}
 
 \dd Expands to the internal keyword specified in the section title.
 
 \dt \i\c{%k}
 
 \dd Expands to the internal keyword specified in the section title.

-So in a chapter declared as \q{\cw{\\C\{fish\} Catching Fish}}, this
-formatting command would expand to \q{\cw{fish}}. If the section has
+So in a chapter declared as \cq{\\C\{fish\} Catching Fish}, this
+formatting command would expand to \cq{fish}. If the section has

 no keyword (an unnumbered chapter created using \c{\\U}), this
 directive falls back to doing the same thing as \c{%N}.
 
 These formatting directives can also be used in the
 no keyword (an unnumbered chapter created using \c{\\U}), this
 directive falls back to doing the same thing as \c{%N}.
 
 These formatting directives can also be used in the

-\cw{\\cfg\{xhtml-template-fragment\}} configuration directive (see
+\cw{\\cfg\{html-template-fragment\}} configuration directive (see

 \k{output-html-misc}).
 
 }
 
 \k{output-html-misc}).
 
 }
 

-\dt \I{\cw{\\cfg\{xhtml-single-filename\}}}\cw{\\cfg\{xhtml-single-filename\}\{}\e{filename}\cw{\}}
+\dt \I{\cw{\\cfg\{html-single-filename\}}}\cw{\\cfg\{html-single-filename\}\{}\e{filename}\cw{\}}

 
 \dd Sets the file name in which to store the entire document, if
 
 \dd Sets the file name in which to store the entire document, if

-Halibut is configured (using \c{\\cfg\{xhtml-leaf-level\}\{0\}} to
+Halibut is configured (using \c{\\cfg\{html-leaf-level\}\{0\}} to

 produce a single self-contained file. Both this directive \e{and}
 produce a single self-contained file. Both this directive \e{and}

-\c{\\cfg\{xhtml-leaf-level\}\{0\}} are implicitly generated if you
+\c{\\cfg\{html-leaf-level\}\{0\}} are implicitly generated if you

 provide a file name parameter after the command-line option
 \i\c{--html} (see \k{running-options}).
 
 provide a file name parameter after the command-line option
 \i\c{--html} (see \k{running-options}).
 


@@ -418,7 +420,7 @@ sections in the file and/or the sections below it.
 The configuration directives listed below allow you to configure the
 splitting into files, and the details of the contents sections.
 
 The configuration directives listed below allow you to configure the
 splitting into files, and the details of the contents sections.
 

-\dt \I{\cw{\\cfg\{xhtml-leaf-level\}}}\cw{\\cfg\{xhtml-leaf-level\}\{}\e{depth}\cw{\}}
+\dt \I{\cw{\\cfg\{html-leaf-level\}}}\cw{\\cfg\{html-leaf-level\}\{}\e{depth}\cw{\}}

 
 \dd This setting indicates the depth of section which should be
 given a \I{leaf file}\q{leaf} file (a file with no sub-files). So if
 
 \dd This setting indicates the depth of section which should be
 given a \I{leaf file}\q{leaf} file (a file with no sub-files). So if


@@ -432,7 +434,7 @@ file, and the chapter files will mostly just contain links to their
 
 If you set this option to zero, then the whole document will appear
 in a single file. If you do this, Halibut will call that file
 
 If you set this option to zero, then the whole document will appear
 in a single file. If you do this, Halibut will call that file

-\i\c{Manual.html} instead of \i\c{Contents.html}.
+\i\c{Manual.html} instead of \i\c{Contents.html} by default.

 
 This option is automatically set to zero if you provide a file name
 parameter after the command-line option \i\c{--html} (see
 
 This option is automatically set to zero if you provide a file name
 parameter after the command-line option \i\c{--html} (see


@@ -442,10 +444,11 @@ that file.
 
 }
 
 
 }
 

-\dt \I{\cw{\\cfg\{xhtml-contents-depth\}}}\cw{\\cfg\{xhtml-contents-depth-}\e{level}\cw{\}\{}\e{depth}\cw{\}}
+\dt \I{\cw{\\cfg\{html-contents-depth\}}}\cw{\\cfg\{html-contents-depth\}\{}\e{level}\cw{\}\{}\e{depth}\cw{\}}

 
 \dd This directive allows you to specify how \I{depth of
 
 \dd This directive allows you to specify how \I{depth of

-contents}deep the contents section in a particular file should go.
+contents}deep any contents section in a particular level of file
+should go.

 
 \lcont{
 
 
 \lcont{
 


@@ -453,29 +456,28 @@ The \e{level} parameter indicates which level of contents section
 you are dealing with. 0 denotes the main contents section in the
 topmost file \c{Contents.html}; 1 denotes a contents section in a
 chapter file; 2 is a contents section in a file containing a \c{\\H}
 you are dealing with. 0 denotes the main contents section in the
 topmost file \c{Contents.html}; 1 denotes a contents section in a
 chapter file; 2 is a contents section in a file containing a \c{\\H}

-heading, and so on. Currently you can't go below level 5 (which
-corresponds to a \c{\\S3} heading).
+heading, and so on.

 
 The \e{depth} parameter indicates the maximum depth of heading which
 will be shown in this contents section. Again, 1 denotes a chapter,
 2 is a \c{\\H} heading, 3 is a \c{\\S} heading, and so on.
 
 
 The \e{depth} parameter indicates the maximum depth of heading which
 will be shown in this contents section. Again, 1 denotes a chapter,
 2 is a \c{\\H} heading, 3 is a \c{\\S} heading, and so on.
 

-So, for example: \cw{\\cfg\{xhtml-contents-depth-1\}\{3\}} instructs
+So, for example: \cw{\\cfg\{html-contents-depth\}\{1\}\{3\}} instructs

 Halibut to put contents links in chapter files for all sections down
 to \c{\\S} level, but not to go into any more detail than that.
 
 Halibut to put contents links in chapter files for all sections down
 to \c{\\S} level, but not to go into any more detail than that.
 

-}
+For backwards compatibility, the alternative syntax
+\cw{\\cfg\{html-contents-depth-}\e{level}\cw{\}\{}\e{depth}\cw{\}}
+is also supported.

 
 

-\# FIXME: this is utterly ghastly. For a start, it should include
-\# the level as a separate argument, like the text section config
-\# directives. Secondly, it shouldn't be limited in depth!
+}

 
 

-\dt \I{\cw{\\cfg\{xhtml-leaf-contains-contents\}}}\cw{\\cfg\{xhtml-leaf-contains-contents\}\{}\e{boolean}\cw{\}}
+\dt \I{\cw{\\cfg\{html-leaf-contains-contents\}}}\cw{\\cfg\{html-leaf-contains-contents\}\{}\e{boolean}\cw{\}}

 
 \dd If you set this to \c{true}, then each leaf file will contain
 its own contents section which summarises the text within it.
 
 
 \dd If you set this to \c{true}, then each leaf file will contain
 its own contents section which summarises the text within it.
 

-\dt \I{\cw{\\cfg\{xhtml-leaf-smallest-contents\}}}\cw{\\cfg\{xhtml-leaf-smallest-contents\}\{}\e{number}\cw{\}}
+\dt \I{\cw{\\cfg\{html-leaf-smallest-contents\}}}\cw{\\cfg\{html-leaf-smallest-contents\}\{}\e{number}\cw{\}}

 
 \dd Contents sections in leaf files are not output at all if they
 contain very few entries (on the assumption that it just isn't worth
 
 \dd Contents sections in leaf files are not output at all if they
 contain very few entries (on the assumption that it just isn't worth


@@ -489,20 +491,47 @@ The directives in this section allow you to supply pieces of
 \I{HTML}\i{verbatim HTML} code, which will be included in various
 parts of the output files.
 
 \I{HTML}\i{verbatim HTML} code, which will be included in various
 parts of the output files.
 

-\dt \I{\cw{\\cfg\{xhtml-head-end\}}}\cw{\\cfg\{xhtml-head-end\}\{}\e{HTML text}\cw{\}}
+Note that none of Halibut's usual character set translation is applied
+to this code; it is assumed to already be in a suitable encoding for
+the target HTML files.
+
+\dt \I{\cw{\\cfg\{html-head-end\}}}\cw{\\cfg\{html-head-end\}\{}\e{HTML text}\cw{\}}

 
 \dd The text you provide in this directive is placed at the end of
 the \i\cw{<HEAD>} section of each output HTML file. So this is a
 good place to put, for example, a link to a \i{CSS} \i{stylesheet}.
 
 
 \dd The text you provide in this directive is placed at the end of
 the \i\cw{<HEAD>} section of each output HTML file. So this is a
 good place to put, for example, a link to a \i{CSS} \i{stylesheet}.
 

-\dt \I{\cw{\\cfg\{xhtml-body-tag\}}}\cw{\\cfg\{xhtml-body-tag\}\{}\e{HTML text}\cw{\}}
+\dt \I{\cw{\\cfg\{html-local-head\}}}\cw{\\cfg\{html-local-head\}\{}\e{HTML text}\cw{\}}
+
+\dd This configuration directive is local: you specify it within a
+document section, and it acts on that section only.
+
+\lcont{
+
+The text you provide in this directive is placed at the end of the
+\i\cw{<HEAD>} section of whichever output HTML file contains the
+section in which the directive was placed. You can specify this
+directive multiple times in multiple sections if you like.
+
+This directive is particularly useful for constructing \i{MacOS
+on-line help}, which is mostly normal HTML but which requires a
+special \i\cw{<META NAME="AppleTitle">} tag in the topmost source
+file. You can arrange this by placing this configuration directive
+in the preamble or the introduction section, something like this:
+
+\c \cfg{html-local-head}{<meta name="AppleTitle"
+\c content="MyApp Help">}
+
+}
+
+\dt \I{\cw{\\cfg\{html-body-tag\}}}\cw{\\cfg\{html-body-tag\}\{}\e{HTML text}\cw{\}}

 
 \dd The text you provide in this directive is used in place of the
 \i\cw{<BODY>} tag in each output file. So if you wanted to define a
 \i{background colour}, for example, you could write
 
 \dd The text you provide in this directive is used in place of the
 \i\cw{<BODY>} tag in each output file. So if you wanted to define a
 \i{background colour}, for example, you could write

-\cw{\\cfg\{xhtml-body-tag\}\{<body bg="#123456">\}}.
+\cw{\\cfg\{html-body-tag\}\{<body bg="#123456">\}}.

 
 

-\dt \I{\cw{\\cfg\{xhtml-body-start\}}}\cw{\\cfg\{xhtml-body-start\}\{}\e{HTML text}\cw{\}}
+\dt \I{\cw{\\cfg\{html-body-start\}}}\cw{\\cfg\{html-body-start\}\{}\e{HTML text}\cw{\}}

 
 \dd The text you provide in this directive is placed at the
 beginning of the \i\cw{<BODY>} section of each output HTML file. So
 
 \dd The text you provide in this directive is placed at the
 beginning of the \i\cw{<BODY>} section of each output HTML file. So


@@ -510,41 +539,41 @@ if you intend your HTML files to be part of a web site with a
 standard \i{house style}, and the style needs a \i{header} at the
 top of every page, this is where you can add that header.
 
 standard \i{house style}, and the style needs a \i{header} at the
 top of every page, this is where you can add that header.
 

-\dt \I{\cw{\\cfg\{xhtml-body-end\}}}\cw{\\cfg\{xhtml-body-end\}\{}\e{HTML text}\cw{\}}
+\dt \I{\cw{\\cfg\{html-body-end\}}}\cw{\\cfg\{html-body-end\}\{}\e{HTML text}\cw{\}}

 
 \dd The text you provide in this directive is placed at the end of
 
 \dd The text you provide in this directive is placed at the end of

-the \i\cw{<BODY>} section of each output HTML file. So if you intend
-your HTML files to be part of a web site with a standard \i{house
-style}, and the style needs a \i{footer} at the bottom of every
-page, this is where you can add that footer.
+the \i\cw{<BODY>} section of each output HTML file, before any address
+section. So if you intend your HTML files to be part of a web site
+with a standard \i{house style}, and the style needs a \i{footer} at
+the bottom of every page, this is where you can add that footer.

 
 

-\dt \I{\cw{\\cfg\{xhtml-address-start\}}}\cw{\\cfg\{xhtml-address-start\}\{}\e{HTML text}\cw{\}}
+\dt \I{\cw{\\cfg\{html-address-start\}}}\cw{\\cfg\{html-address-start\}\{}\e{HTML text}\cw{\}}

 
 \dd The text you provide in this directive is placed at the
 beginning of the \i\cw{<ADDRESS>} section at the bottom of each
 output HTML file. This might be a good place to put authors'
 \i{contact details}, for example.
 
 
 \dd The text you provide in this directive is placed at the
 beginning of the \i\cw{<ADDRESS>} section at the bottom of each
 output HTML file. This might be a good place to put authors'
 \i{contact details}, for example.
 

-\dt \I{\cw{\\cfg\{xhtml-address-end\}}}\cw{\\cfg\{xhtml-address-end\}\{}\e{HTML text}\cw{\}}
+\dt \I{\cw{\\cfg\{html-address-end\}}}\cw{\\cfg\{html-address-end\}\{}\e{HTML text}\cw{\}}

 
 \dd The text you provide in this directive is placed at the end of
 the \i\cw{<ADDRESS>} section at the bottom of each output HTML file,
 after the version IDs (if present).
 
 
 \dd The text you provide in this directive is placed at the end of
 the \i\cw{<ADDRESS>} section at the bottom of each output HTML file,
 after the version IDs (if present).
 

-\dt \I{\cw{\\cfg\{xhtml-navigation-attributes\}}}\cw{\\cfg\{xhtml-navigation-attributes\}\{}\e{HTML attributes}\cw{\}}
+\dt \I{\cw{\\cfg\{html-navigation-attributes\}}}\cw{\\cfg\{html-navigation-attributes\}\{}\e{HTML attributes}\cw{\}}

 
 \dd The text you provide in this directive is included inside the
 \cw{<P>} tag containing the \i{navigation links} at the top of each
 page (\i{\q{Previous}} / \i{\q{Contents}} / \i{\q{Next}}). So if you
 wanted the navigation links to have a particular CSS style, you
 could write
 
 \dd The text you provide in this directive is included inside the
 \cw{<P>} tag containing the \i{navigation links} at the top of each
 page (\i{\q{Previous}} / \i{\q{Contents}} / \i{\q{Next}}). So if you
 wanted the navigation links to have a particular CSS style, you
 could write

-\cw{\\cfg\{xhtml-navigation-attributes\}\{class="foo"\}}, and the
+\cw{\\cfg\{html-navigation-attributes\}\{class="foo"\}}, and the

 navigation-links paragraph would then begin with the tag \cw{<p
 class="foo">}.
 
 \S{output-html-headings} \ii{Configuring heading display}
 
 navigation-links paragraph would then begin with the tag \cw{<p
 class="foo">}.
 
 \S{output-html-headings} \ii{Configuring heading display}
 

-\dt \I{\cw{\\cfg\{xhtml-chapter-numeric\}}}\cw{\\cfg\{xhtml-chapter-numeric\}\{}\e{boolean}\cw{\}}
+\dt \I{\cw{\\cfg\{html-chapter-numeric\}}}\cw{\\cfg\{html-chapter-numeric\}\{}\e{boolean}\cw{\}}

 
 \dd If this is set to \c{true}, then chapter headings will not
 contain the word \q{Chapter} (or whatever other word you have
 
 \dd If this is set to \c{true}, then chapter headings will not
 contain the word \q{Chapter} (or whatever other word you have


@@ -553,14 +582,16 @@ they will just contain the chapter \e{number}, followed by the
 chapter title. If you set this to \c{false}, chapter headings will
 be prefixed by \q{Chapter} or equivalent.
 
 chapter title. If you set this to \c{false}, chapter headings will
 be prefixed by \q{Chapter} or equivalent.
 

-\dt \I{\cw{\\cfg\{xhtml-chapter-suffix\}}}\cw{\\cfg\{xhtml-chapter-suffix\}\{}\e{text}\cw{\}}
+\dt \I{\cw{\\cfg\{html-chapter-suffix\}}}\cw{\\cfg\{html-chapter-suffix\}\{}\e{text}\cw{\}}

 
 \dd This specifies the suffix text to be appended to the chapter
 number, before displaying the chapter title. For example, if you set
 
 \dd This specifies the suffix text to be appended to the chapter
 number, before displaying the chapter title. For example, if you set

-this to \q{\cw{:\_}}, then the chapter title might look something
+this to \cq{:\_}, then the chapter title might look something

 like \q{Chapter 2: Doing Things}.
 
 like \q{Chapter 2: Doing Things}.
 

-\dt \I{\cw{\\cfg\{xhtml-section-numeric\}}}\cw{\\cfg\{xhtml-section-numeric\}\{}\e{level}\cw{\}\{}\e{boolean}\cw{\}}
+\dt \I{\cw{\\cfg\{html-section-numeric\}}}\cw{\\cfg\{html-section-numeric\}\{}\e{level}\cw{\}\{}\e{boolean}\cw{\}}
+
+\# {level} can be omitted (defaults to 0). Is this intentional?

 
 \dd Specifies whether section headings at a particular level should
 contain the word \q{Section} or equivalent (if \c{false}), or should
 
 \dd Specifies whether section headings at a particular level should
 contain the word \q{Section} or equivalent (if \c{false}), or should


@@ -569,47 +600,157 @@ which level of section headings you want to affect: 0 means
 first-level headings (\c{\\H}), 1 means second-level headings
 (\c{\\S}), 2 means the level below that (\c{\\S2}), and so on.
 
 first-level headings (\c{\\H}), 1 means second-level headings
 (\c{\\S}), 2 means the level below that (\c{\\S2}), and so on.
 

-\dt \I{\cw{\\cfg\{xhtml-section-suffix\}}}\cw{\\cfg\{xhtml-section-suffix\}\{}\e{level}\cw{\}\{}\e{text}\cw{\}}
+\dt \I{\cw{\\cfg\{html-section-suffix\}}}\cw{\\cfg\{html-section-suffix\}\{}\e{level}\cw{\}\{}\e{text}\cw{\}}
+
+\# {level} can be omitted (defaults to 0). Is this intentional?

 
 \dd Specifies the suffix text to be appended to section numbers at a
 particular level, before displaying the section title.
 
 
 \dd Specifies the suffix text to be appended to section numbers at a
 particular level, before displaying the section title.
 

+\S{output-html-names} Configuring standard text
+
+These directives let you fine-tune the names Halibut uses in places
+such as the navigation bar to refer to various parts of the document,
+and other standard pieces of text, for instance to change them to a
+different language.
+
+\dt \I{\cw{\\cfg\{html-preamble-text\}}}\cw{\\cfg\{html-preamble-text\}\{}\e{text}\cw{\}}
+
+\dt \I{\cw{\\cfg\{html-contents-text\}}}\cw{\\cfg\{html-contents-text\}\{}\e{text}\cw{\}}
+
+\dt \I{\cw{\\cfg\{html-index-text\}}}\cw{\\cfg\{html-index-text\}\{}\e{text}\cw{\}}
+
+\dd Text used to refer to the preamble (i.e., any paragraphs before
+the first chapter heading), contents, and index respectively, in the
+navigation bar, contents, and index.
+
+\dt \I{\cw{\\cfg\{html-title-separator\}}}\cw{\\cfg\{html-title-separator\}\{}\e{text}\cw{\}}
+
+\dd If multiple headings are used in a file's \cw{<TITLE>} tag, this
+text is used to separate them.
+
+\# Under what circumstances can this occur?
+
+\dt \I{\cw{\\cfg\{html-index-main-separator\}}}\cw{\\cfg\{html-index-main-separator\}\{}\e{text}\cw{\}}
+
+\dd Separator between index term and references in the index.
+
+\dt \I{\cw{\\cfg\{html-index-multiple-separator\}}}\cw{\\cfg\{html-index-multiple-separator\}\{}\e{text}\cw{\}}
+
+\dd Separator between multiple references for a single index term in
+the index.
+
+\dt \I{\cw{\\cfg\{html-pre-versionid\}}}\cw{\\cfg\{html-pre-versionid\}\{}\e{text}\cw{\}}
+
+\dt \I{\cw{\\cfg\{html-post-versionid\}}}\cw{\\cfg\{html-post-versionid\}\{}\e{text}\cw{\}}
+
+\dd Text surrounding each output \i{version ID paragraph}.
+
+\dt \I{\cw{\\cfg\{html-nav-prev-text\}}}\cw{\\cfg\{html-nav-prev-text\}\{}\e{text}\cw{\}}
+
+\dt \I{\cw{\\cfg\{html-nav-next-text\}}}\cw{\\cfg\{html-nav-next-text\}\{}\e{text}\cw{\}}
+
+\dd The text used for the \q{previous page} and \q{next page} links on
+the navigation bar.
+
+\dt \I{\cw{\\cfg\{html-nav-separator\}}}\cw{\\cfg\{html-nav-separator\}\{}\e{text}\cw{\}}
+
+\dd Separator between links in the navigation bar.
+
+\S{output-html-characters} Configuring the characters used
+
+Unlike the other backends, HTML does not have a single
+\i\cw{\\cfg\{html-charset\}} directive, as there are several levels of
+character encoding to consider.
+
+The character set names are the same as for
+\cw{\\cfg\{input-charset\}} (see \k{input-config}). However, unlike
+\cw{\\cfg\{input-charset\}}, these directives affect the \e{entire}
+output; it's not possible to switch encodings halfway through.
+
+\dt \I\cw{\\cfg\{html-output-charset\}}\cw{\\cfg\{html-output-charset\}\{}\e{character set name}\cw{\}}
+
+\dd The character encoding of the HTML file to be output. Unicode
+characters in this encoding's repertoire are included literally rather
+than as \i{HTML entities}.
+
+\dt \I\cw{\\cfg\{html-restrict-charset\}}\cw{\\cfg\{html-restrict-charset\}\{}\e{character set name}\cw{\}}
+
+\dd Only Unicode characters representable in this character set will be
+output; any others will be omitted and use their fallback text, if
+any. Characters not in \q{html-output-charset} will be represented as
+HTML numeric entities.
+
+\dt \I{\cw{\\cfg\{html-quotes\}}}\cw{\\cfg\{html-quotes\}\{}\e{open-quote}\cw{\}\{}\e{close-quote}\cw{\}}[\cw{\{}\e{open-quote}\cw{\}\{}\e{close-quote}...\cw{\}}]
+
+\dd Specifies the quotation marks to use, overriding any
+\cw{\\cfg\{quotes\}} directive. You can specify multiple
+fallback options. Works exactly like the \cw{\\cfg\{text-quotes\}}
+directive (see \k{output-text-characters}).
+

 \S{output-html-misc} Miscellaneous options
 
 \S{output-html-misc} Miscellaneous options
 

-\dt \I{\cw{\\cfg\{xhtml-template-fragment\}}}\cw{\\cfg\{xhtml-template-fragment\}\{}\e{template}\cw{\}}
+\dt \I\cw{\\cfg\{html-version\}}\cw{\\cfg\{html-version\}\{}\e{version}\cw{\}}
+
+\dd Identifies the precise version of HTML that is output. This
+affects the declaration within the HTML, and also has minor effects on
+the body of the HTML so that it is valid for the declare version. The
+available variants are:
+
+\lcont{
+
+\b \cw{html3.2}
+
+\b \cw{html4}
+
+\b \cw{iso-html}
+
+\b \cw{xhtml1.0transitional}
+
+\b \cw{xhtml1.0strict}
+
+}
+
+\dt \I{\cw{\\cfg\{html-template-fragment\}}}\cw{\\cfg\{html-template-fragment\}\{}\e{template}\cw{\}}

 
 \dd This directive lets you specify a \i{template}, with exactly the
 
 \dd This directive lets you specify a \i{template}, with exactly the

-same syntax used in \cw{\\cfg\{xhtml-template-filename\}} (see
+same syntax used in \cw{\\cfg\{html-template-filename\}} (see

 \k{output-html-file}), to be used for the anchor names (\i\cw{<A
 NAME="...">}) used to allow URLs to refer to specific sections
 \k{output-html-file}), to be used for the anchor names (\i\cw{<A
 NAME="...">}) used to allow URLs to refer to specific sections

-within a particular HTML file. So if you set this to \q{\cw{%k}},
+within a particular HTML file. So if you set this to \cq{%k},

 for example, then each individual section in your document will be
 addressable by means of a URL ending in a \c{#} followed by your
 internal section keyword.
 
 for example, then each individual section in your document will be
 addressable by means of a URL ending in a \c{#} followed by your
 internal section keyword.
 

-\dt \I{\cw{\\cfg\{xhtml-versionid\}}}\cw{\\cfg\{xhtml-versionid\}\{}\e{boolean}\cw{\}}
+\lcont{
+
+Note that no checking is done that the anchor name is valid HTML. So
+if you use \cq{%k}, for example, you may need to restrict your use of
+keyword names.
+
+}
+
+\dt \I{\cw{\\cfg\{html-versionid\}}}\cw{\\cfg\{html-versionid\}\{}\e{boolean}\cw{\}}

 
 \dd If this is set to \c{true}, \i{version ID paragraphs} (defined using
 the \i\c{\\versionid} command - see \k{input-blurb}) will be included
 visibly in the \i\cw{<ADDRESS>} section at the bottom of each HTML
 
 \dd If this is set to \c{true}, \i{version ID paragraphs} (defined using
 the \i\c{\\versionid} command - see \k{input-blurb}) will be included
 visibly in the \i\cw{<ADDRESS>} section at the bottom of each HTML

-file. If it is set to \c{false}, they will be omitted completely.
+file. If it is set to \c{false}, they will only be included as HTML
+comments.

 
 

-\# FIXME: surely it would be better to include them in HTML
-\# comments? The only question is whether they should be _visible_.
-
-\dt \I{\cw{\\cfg\{xhtml-suppress-address\}}}\cw{\\cfg\{xhtml-suppress-address\}\{}\e{boolean}\cw{\}}
+\dt \I{\cw{\\cfg\{html-suppress-address\}}}\cw{\\cfg\{html-suppress-address\}\{}\e{boolean}\cw{\}}

 
 \dd If this is set to \c{true}, the \i\cw{<ADDRESS>} section at the
 bottom of each HTML file will be omitted completely. (This will
 
 \dd If this is set to \c{true}, the \i\cw{<ADDRESS>} section at the
 bottom of each HTML file will be omitted completely. (This will

-therefore also cause \i{version IDs} not to be included.)
+therefore also cause \i{version IDs} not to be included visibly.)

 
 

-\dt \I{\cw{\\cfg\{xhtml-author\}}}\cw{\\cfg\{xhtml-author\}\{}\e{text}\cw{\}}
+\dt \I{\cw{\\cfg\{html-author\}}}\cw{\\cfg\{html-author\}\{}\e{text}\cw{\}}

 
 \dd The text supplied here goes in a \I{\cw{<META>} tags}\cw{<META
 name="author">} tag in the output HTML files, so that browsers which
 support this can automatically identify the \i{author} of the document.
 
 
 \dd The text supplied here goes in a \I{\cw{<META>} tags}\cw{<META
 name="author">} tag in the output HTML files, so that browsers which
 support this can automatically identify the \i{author} of the document.
 

-\dt \I{\cw{\\cfg\{xhtml-description\}}}\cw{\\cfg\{xhtml-description\}\{}\e{text}\cw{\}}
+\dt \I{\cw{\\cfg\{html-description\}}}\cw{\\cfg\{html-description\}\{}\e{text}\cw{\}}

 
 \dd The text supplied here goes in a \I{\cw{<META>} tags}\cw{<META
 name="description">} tag in the output HTML files, so that browsers
 
 \dd The text supplied here goes in a \I{\cw{<META>} tags}\cw{<META
 name="description">} tag in the output HTML files, so that browsers


@@ -620,46 +761,61 @@ document}description of the document.
 
 The \i{default settings} for Halibut's HTML output format are:
 
 
 The \i{default settings} for Halibut's HTML output format are:
 

-\c \cfg{xhtml-contents-filename}{Contents.html}
-\c \cfg{xhtml-index-filename}{IndexPage.html}
-\c \cfg{xhtml-template-filename}{%n.html}
-\c \cfg{xhtml-single-filename}{Manual.html}
-\c \cfg{xhtml-template-fragment}{%b}
-\c
-\c \cfg{xhtml-leaf-level}{2}
-\c \cfg{xhtml-leaf-contains-contents}{false}
-\c \cfg{xhtml-leaf-smallest-contents}{4}
-\c \cfg{xhtml-contents-depth-0}{2}
-\c \cfg{xhtml-contents-depth-1}{3}
-\c \cfg{xhtml-contents-depth-2}{4}
-\c \cfg{xhtml-contents-depth-3}{5}
-\c \cfg{xhtml-contents-depth-4}{6}
-\c \cfg{xhtml-contents-depth-5}{7}
+\c \cfg{html-contents-filename}{Contents.html}
+\c \cfg{html-index-filename}{IndexPage.html}
+\c \cfg{html-template-filename}{%n.html}
+\c \cfg{html-single-filename}{Manual.html}

 \c
 \c

-\c \cfg{xhtml-head-end}{}
-\c \cfg{xhtml-body-tag}{<body>}
-\c \cfg{xhtml-body-start}{}
-\c \cfg{xhtml-body-end}{}
-\c \cfg{xhtml-address-start}{}
-\c \cfg{xhtml-address-end}{}
-\c \cfg{xhtml-navigation-attributes}{}
+\c \cfg{html-leaf-level}{2}
+\c \cfg{html-leaf-contains-contents}{false}
+\c \cfg{html-leaf-smallest-contents}{4}
+\c \cfg{html-contents-depth}{0}{2}
+\c \cfg{html-contents-depth}{1}{3}
+\c ... and so on for all section levels below this ...
+\e iiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiii

 \c
 \c

-\c \cfg{xhtml-versionid}{true}
-\c \cfg{xhtml-suppress-address}{false}
-\c \cfg{xhtml-author}{}
-\c \cfg{xhtml-description}{}
+\c \cfg{html-head-end}{}
+\c \cfg{html-body-tag}{<body>}
+\c \cfg{html-body-start}{}
+\c \cfg{html-body-end}{}
+\c \cfg{html-address-start}{}
+\c \cfg{html-address-end}{}
+\c \cfg{html-navigation-attributes}{}

 \c
 \c

-\c \cfg{xhtml-chapter-numeric}{false}
-\c \cfg{xhtml-chapter-suffix}{: }
+\c \cfg{html-chapter-numeric}{false}
+\c \cfg{html-chapter-suffix}{: }

 \c
 \c

-\c \cfg{xhtml-section-numeric}{0}{true}
-\c \cfg{xhtml-section-suffix}{0}{ }
+\c \cfg{html-section-numeric}{0}{true}
+\c \cfg{html-section-suffix}{0}{ }

 \c
 \c

-\c \cfg{xhtml-section-numeric}{1}{true}
-\c \cfg{xhtml-section-suffix}{1}{ }
+\c \cfg{html-section-numeric}{1}{true}
+\c \cfg{html-section-suffix}{1}{ }

 \c
 \c ... and so on for all section levels below this ...
 \e iiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiii
 \c
 \c ... and so on for all section levels below this ...
 \e iiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiii

+\c
+\c \cfg{html-preamble-text}{Preamble}
+\c \cfg{html-contents-text}{Contents}
+\c \cfg{html-index-text}{Index}
+\c \cfg{html-title-separator}{ - }
+\c \cfg{html-index-main-separator}{: }
+\c \cfg{html-index-multiple-separator}{, }
+\c \cfg{html-pre-versionid}{[}
+\c \cfg{html-post-versionid}{]}
+\c \cfg{html-nav-prev-text}{Previous}
+\c \cfg{html-nav-next-text}{Next}
+\c \cfg{html-nav-separator}{ | }
+\c
+\c \cfg{html-output-charset}{ASCII}
+\c \cfg{html-restrict-charset}{UTF-8}
+\c \cfg{html-quotes}{\u2018}{\u2019}{"}{"}
+\c
+\c \cfg{html-version}{html4}
+\c \cfg{html-template-fragment}{%b}
+\c \cfg{html-versionid}{true}
+\c \cfg{html-suppress-address}{false}
+\c \cfg{html-author}{}
+\c \cfg{html-description}{}

 
 \H{output-whlp} Windows Help
 
 
 \H{output-whlp} Windows Help
 


@@ -667,8 +823,9 @@ This output format generates data that can be used by the \i{Windows
 Help} program \cw{WINHELP.EXE}. There are two actual files
 generated, one ending in \c{.hlp} and the other ending in \c{.cnt}.
 
 Help} program \cw{WINHELP.EXE}. There are two actual files
 generated, one ending in \c{.hlp} and the other ending in \c{.cnt}.
 

-Currently, the output is harcoded to be in the \q{\i{Win1252}}
-character set.
+Currently, the output is hardcoded to be in the \q{\i{Win1252}}
+character set. (If anyone knows how character sets are encoded in
+Windows Help, we'd appreciate help.)

 
 The Windows Help output format supports the following configuration
 directives:
 
 The Windows Help output format supports the following configuration
 directives:


@@ -1014,7 +1171,7 @@ directive (see \k{output-text-dimensions}).
 
 \dd Specifies the suffix text to be appended to each section number
 before displaying the section title. For example, if you set this to
 
 \dd Specifies the suffix text to be appended to each section number
 before displaying the section title. For example, if you set this to

-\q{\cw{:\_}}, then a typical section title might look something like
+\cq{:\_}, then a typical section title might look something like

 \q{Section 3.1: Something Like This}.
 
 \dt \I{\cw{\\cfg\{info-underline\}}}\cw{\\cfg\{info-underline\}\{}\e{text}\cw{\}}[\cw{\{}\e{text}\cw{\}}...]
 \q{Section 3.1: Something Like This}.
 
 \dt \I{\cw{\\cfg\{info-underline\}}}\cw{\\cfg\{info-underline\}\{}\e{text}\cw{\}}[\cw{\{}\e{text}\cw{\}}...]


@@ -1137,7 +1294,7 @@ The \i{default settings} for the \c{info} output format are:
 \c \cfg{info-index-width}{40}
 \c \cfg{info-list-indent}{1}
 \c \cfg{info-listitem-indent}{3}
 \c \cfg{info-index-width}{40}
 \c \cfg{info-list-indent}{1}
 \c \cfg{info-listitem-indent}{3}

-zc
+\c

 \c \cfg{info-section-suffix}{: }
 \c \cfg{info-underline}{\u203e}{-}
 \c
 \c \cfg{info-section-suffix}{: }
 \c \cfg{info-underline}{\u203e}{-}
 \c


@@ -1151,12 +1308,16 @@ zc
 
 and no \cw{\\cfg\{info-dir-entry\}} directives.
 
 
 and no \cw{\\cfg\{info-dir-entry\}} directives.
 

-\H{output-ps} \i{PostScript}
+\H{output-paper} Paper formats
+
+These output formats (currently PostScript and PDF) generate printable
+manuals. As such, they share a number of configuration directives.
+
+\S{output-ps} \i{PostScript}

 
 This output format generates a printable manual in PostScript format.
 
 
 This output format generates a printable manual in PostScript format.
 

-This format is currently very new and is not yet configurable. There
-is only one available configuration option:
+There is one configuration option specific to PostScript:

 
 \dt \I{\cw{\\cfg\{ps-filename\}}}\cw{\\cfg\{ps-filename\}\{}\e{filename}\cw{\}}
 
 
 \dt \I{\cw{\\cfg\{ps-filename\}}}\cw{\\cfg\{ps-filename\}\{}\e{filename}\cw{\}}
 


@@ -1169,7 +1330,7 @@ The \i{default settings} for the PostScript output format are:
 
 \c \cfg{ps-filename}{output.ps}
 
 
 \c \cfg{ps-filename}{output.ps}
 

-\H{output-pdf} \i{PDF}
+\S{output-pdf} \i{PDF}

 
 This output format generates a printable manual in PDF format. This
 should look exactly identical to the PostScript output (see
 
 This output format generates a printable manual in PDF format. This
 should look exactly identical to the PostScript output (see


@@ -1177,8 +1338,7 @@ should look exactly identical to the PostScript output (see
 provide an outline of all the document's sections and clickable
 cross-references between sections.
 
 provide an outline of all the document's sections and clickable
 cross-references between sections.
 

-This format is currently very new and is not yet configurable. There
-is only one available configuration option:
+There is one configuration option specific to PDF:

 
 \dt \I{\cw{\\cfg\{pdf-filename\}}}\cw{\\cfg\{pdf-filename\}\{}\e{filename}\cw{\}}
 
 
 \dt \I{\cw{\\cfg\{pdf-filename\}}}\cw{\\cfg\{pdf-filename\}\{}\e{filename}\cw{\}}
 


@@ -1190,3 +1350,210 @@ parameter after the command-line option \i\c{--pdf} (see
 The \i{default settings} for the PDF output format are:
 
 \c \cfg{pdf-filename}{output.pdf}
 The \i{default settings} for the PDF output format are:
 
 \c \cfg{pdf-filename}{output.pdf}

+
+\S{output-paper-dimensions} Configuring layout and \i{measurements}
+
+All measurements are in PostScript \i{points} (72 points to the inch).
+
+\S2{output-paper-pagesize} Page properties
+
+\dt \I{\cw{\\cfg\{paper-page-width\}}}\cw{\\cfg\{paper-page-width\}\{}\e{points}\cw{\}}
+
+\dt \I{\cw{\\cfg\{paper-page-height\}}}\cw{\\cfg\{paper-page-height\}\{}\e{points}\cw{\}}
+
+\dd Specify the absolute limits of the paper.
+
+\dt \I{\cw{\\cfg\{paper-left-margin\}}}\cw{\\cfg\{paper-left-margin\}\{}\e{points}\cw{\}}
+
+\dt \I{\cw{\\cfg\{paper-top-margin\}}}\cw{\\cfg\{paper-top-margin\}\{}\e{points}\cw{\}}
+
+\dt \I{\cw{\\cfg\{paper-right-margin\}}}\cw{\\cfg\{paper-right-margin\}\{}\e{points}\cw{\}}
+
+\dt \I{\cw{\\cfg\{paper-bottom-margin\}}}\cw{\\cfg\{paper-bottom-margin\}\{}\e{points}\cw{\}}
+
+\dd Specify the margins. Most text appears within these margins,
+except:
+
+\lcont{
+
+\b Section numbers, which appear in the left margin.
+
+\b The footer (containing page numbers), which appears in the bottom
+margin.
+
+}
+
+\S2{output-paper-line} Vertical spacing
+
+\dt \I{\cw{\\cfg\{paper-base-leading\}}}\cw{\\cfg\{paper-base-leading\}\{}\e{points}\cw{\}}
+
+\dd Specifies the amount of space between lines of text within a
+paragraph. (So, if the font size is 12pt and there is 2pt of leading,
+there will be 14pt between successive baselines.)
+
+\dt \I{\cw{\\cfg\{paper-base-para-spacing\}}}\cw{\\cfg\{paper-base-para-spacing\}\{}\e{points}\cw{\}}
+
+\dd Specifies the amount of vertical space between paragraphs. (The
+vertical space between paragraphs does \e{not} include
+\c{paper-base-leading}.)
+
+\S2{output-paper-indentation} Indentation
+
+\dt \I{\cw{\\cfg\{paper-list-indent\}}}\cw{\\cfg\{paper-list-indent\}\{}\e{points}\cw{\}}
+
+\dd Specifies the indentation of the bullet or number in a
+\I{bulletted list, indentation}bulletted or \I{numbered list,
+indentation}numbers \I{list, indentation}list, similarly to
+\cw{\\cfg\{text-list-indent\}} (see \k{output-text-dimensions}).
+
+\dt \I{\cw{\\cfg\{paper-listitem-indent\}}}\cw{\\cfg\{paper-listitem-indent\}\{}\e{points}\cw{\}}
+
+\dd Specifies the \e{extra} indentation for the body of a list item,
+over and above the amount configured in \cw{\\cfg\{paper-list-indent\}}.
+
+\# FIXME: doesn't actually work, AFAICT.
+
+\dt \I{\cw{\\cfg\{paper-quote-indent\}}}\cw{\\cfg\{paper-quote-indent\}\{}\e{points}\cw{\}}
+
+\dd Specifies the amount of indentation for a level of quoting. Used
+for \cw{\\quote} (see \k{input-quote}) and code quotes with \cw{\\c}
+(see \k{input-code}).
+
+\S2{output-paper-headings} Headings
+
+\dt \I{\cw{\\cfg\{paper-chapter-top-space\}}}\cw{\\cfg\{paper-chapter-top-space\}\{}\e{points}\cw{\}}
+
+\dd Specifies the space between the top margin and the top of the
+chapter heading. (Each chapter begins on a new page.)
+
+\dt \I{\cw{\\cfg\{paper-chapter-underline-thickness\}}}\cw{\\cfg\{paper-chapter-underline-thickness\}\{}\e{points}\cw{\}}
+
+\dd Specifies the vertical thickness of the black rule under chapter
+headings.
+
+\dt \I{\cw{\\cfg\{paper-chapter-underline-depth\}}}\cw{\\cfg\{paper-chapter-underline-depth\}\{}\e{points}\cw{\}}
+
+\dd Specifies the distance between the base of the chapter heading and
+the \e{base} of the underlying rule.
+
+\dt \I{\cw{\\cfg\{paper-sect-num-left-space\}}}\cw{\\cfg\{paper-sect-num-left-space\}\{}\e{points}\cw{\}}
+
+\dd Specifies the distance between the left margin and the \e{right}
+of section numbers (which are in the left margin).
+
+\S2{output-paper-index} Contents and index
+
+\dt \I{\cw{\\cfg\{paper-contents-index-step\}}}\cw{\\cfg\{paper-contents-index-step\}\{}\e{points}\cw{\}}
+
+\dt \I{\cw{\\cfg\{paper-contents-margin\}}}\cw{\\cfg\{paper-contents-margin\}\{}\e{points}\cw{\}}
+
+\# FIXME: I do not know what dees one does. (I couldn't get either of
+them to do anything obvious, although the source indicates they should
+do something.)
+
+\dt \I{\cw{\\cfg\{paper-leader-separation\}}}\cw{\\cfg\{paper-leader-separation\}\{}\e{points}\cw{\}}
+
+\dd Specifies the horizontal spacing between dots in \i\e{leaders}
+(the dotted lines that appear between section headings and page
+numbers in the table of contents).
+
+\dt \I{\cw{\\cfg\{paper-footer-distance\}}}\cw{\\cfg\{paper-footer-distance\}\{}\e{points}\cw{\}}
+
+\dd Specifies the distance between the bottom margin and the \e{base}
+of the footer (which contains page numbers).
+
+\dt \I{\cw{\\cfg\{paper-index-columns\}}}\cw{\\cfg\{paper-index-columns\}\{}\e{columns}\cw{\}}
+
+\dd Specifies the number of columns the index should be divided into.
+
+\# FIXME: with this set to 1, the right-alignment of some index entry
+page numbers in the Halibut manual is decidedly wonky.
+
+\dt \I{\cw{\\cfg\{paper-index-gutter\}}}\cw{\\cfg\{paper-index-gutter\}\{}\e{points}\cw{\}}
+
+\dd Specifies the amount of \I{gutter} horizontal space between index
+columns.
+
+\dt \I{\cw{\\cfg\{paper-index-minsep\}}}\cw{\\cfg\{paper-index-minsep\}\{}\e{points}\cw{\}}
+
+\dd Specifies the minimum allowable horizontal space between an index
+entry and its page number. If the gap is smaller, the page number is
+moved to the next line.
+
+\S2{output-paper-fonts} Fonts
+
+\dt \I{\cw{\\cfg\{paper-base-font-size\}}}\cw{\\cfg\{paper-base-font-size\}\{}\e{points}\cw{\}}
+
+\dd Specifies the font size of body text.
+
+\# FIXME: actually, this doesn't appear to do anything at all - most
+font sizes are still hardcoded.
+
+\dt \I{\cw{\\cfg\{paper-pagenum-font-size\}}}\cw{\\cfg\{paper-pagenum-font-size\}\{}\e{points}\cw{\}}
+
+\dd Specifies the font size to use for page numbers.
+
+\S2{output-paper-misc} Miscellaneous
+
+\dt \I{\cw{\\cfg\{paper-rule-thickness\}}}\cw{\\cfg\{paper-rule-thickness\}\{}\e{points}\cw{\}}
+
+\dd Specifies the vertical thickness of the rule produced by the
+\cw{\\rule} command (see \k{input-rule}). (Note that no extra space is
+reserved for thicker rules.)
+
+\S{output-paper-characters} Configuring the characters used
+
+\dt \I{\cw{\\cfg\{paper-bullet\}}}\cw{\\cfg\{paper-bullet\}\{}\e{text}\cw{\}}[\cw{\{}\e{text}\cw{\}}...]
+
+\dd Specifies the text to use as the \i{bullet} in bulletted lists.
+You can specify multiple fallback options. Works exactly like the
+\cw{\\cfg\{text-bullet\}} directive (see
+\k{output-text-characters}).
+
+\dt \I{\cw{\\cfg\{paper-quotes\}}}\cw{\\cfg\{paper-quotes\}\{}\e{open-quote}\cw{\}\{}\e{close-quote}\cw{\}}[\cw{\{}\e{open-quote}\cw{\}\{}\e{close-quote}...\cw{\}}]
+
+\dd Specifies the quotation marks to use, overriding any
+\cw{\\cfg\{quotes\}} directive. You can specify multiple
+fallback options. Works exactly like the \cw{\\cfg\{text-quotes\}}
+directive (see \k{output-text-characters}).
+
+\S{output-paper-defaults} Default settings for paper formats
+
+The default page size corresponds to 210\_\u00D7{x}\_297\_mm, i.e.,
+\i{A4 paper}.
+
+\c \cfg{paper-page-width}{595} 
+\c \cfg{paper-page-height}{841} 
+\c
+\c \cfg{paper-left-margin}{72} 
+\c \cfg{paper-top-margin}{72} 
+\c \cfg{paper-right-margin}{72} 
+\c \cfg{paper-bottom-margin}{108} 
+\c
+\c \cfg{paper-base-leading}{1} 
+\c \cfg{paper-base-para-spacing}{10} 
+\c
+\c \cfg{paper-list-indent}{6} 
+\c \cfg{paper-listitem-indent}{18} 
+\c \cfg{paper-quote-indent}{18} 
+\c
+\c \cfg{paper-chapter-top-space}{72} 
+\c \cfg{paper-chapter-underline-thickness}{3} 
+\c \cfg{paper-chapter-underline-depth}{14} 
+\c \cfg{paper-sect-num-left-space}{12} 
+\c
+\c \cfg{paper-contents-index-step}{24} 
+\c \cfg{paper-contents-margin}{84} 
+\c \cfg{paper-leader-separation}{12} 
+\c \cfg{paper-footer-distance}{32} 
+\c \cfg{paper-index-columns}{2} 
+\c \cfg{paper-index-gutter}{36} 
+\c \cfg{paper-index-minsep}{18} 
+\c
+\c \cfg{paper-base-font-size}{12} 
+\c \cfg{paper-pagenum-font-size}{12} 
+\c
+\c \cfg{paper-rule-thickness}{1} 
+\c
+\c \cfg{paper-bullet}{\u2022}{-}
+\c \cfg{paper-quotes}{\u2018}{\u2019}{'}{'}