`make release' tweak to prevent tarball containing trailing NULs (fix from

[sgt/halibut] / doc / output.but

diff --git a/doc/output.but b/doc/output.but
index 74f4c2c..964f49d 100644 (file)
--- a/doc/output.but
+++ b/doc/output.but
@@ -8,12 +8,7 @@ that format.
 \H{output-text} Plain text
 
 This output format generates the document as a single \i{plain text}
 \H{output-text} Plain text
 
 This output format generates the document as a single \i{plain text}

-file.
-
-The output file is currently assumed to be in the \i{ISO 8859-1}
-character set. Any Unicode characters representable in this set will
-be output verbatim; any other characters will not be output and
-their \i{fallback text} (if any) will be used instead.
+file. No table of contents or index is generated.

 
 The precise formatting of the text file can be controlled by a
 variety of configuration directives. They are listed in the
 
 The precise formatting of the text file can be controlled by a
 variety of configuration directives. They are listed in the


@@ -107,18 +102,24 @@ left of that (so that it goes in the margin if there is room).
 
 Also, several of the directives below specify how a title should be
 \I{underlining}underlined. The parameter to one of these directives
 
 Also, several of the directives below specify how a title should be
 \I{underlining}underlined. The parameter to one of these directives

-should be either blank (\cw{\{\}}) or a single character. In the
-latter case, that character will be used to underline the title. So
-you might want to specify, for example,
-\cw{\\text-title-underline\{=\}} but
-\cw{\\text-chapter-underline\{-\}}.
+should be either blank (\cw{\{\}}) or a piece of text which will be
+repeated to produce the underline. So you might want to specify, for
+example, \cw{\\text-title-underline\{=\}} but
+\cw{\\text-chapter-underline\{\-\}}.
+
+You can also specify more than one underline setting, and Halibut
+will choose the first one that the output character set supports.
+So, for example, you could write
+\cw{\\text-chapter-underline\{\\u203e\}\{\-\}}, and Halibut would use
+the Unicode \q{OVERLINE} character where possible and fall back to
+the ASCII minus sign otherwise.

 
 \dt \I{\cw{\\cfg\{text-title-align\}}}\cw{\\cfg\{text-title-align\}\{}\e{alignment}\cw{\}}
 
 \dd Specifies the alignment of the overall document title: \c{left},
 \c{leftplus} or \c{centre}.
 
 
 \dt \I{\cw{\\cfg\{text-title-align\}}}\cw{\\cfg\{text-title-align\}\{}\e{alignment}\cw{\}}
 
 \dd Specifies the alignment of the overall document title: \c{left},
 \c{leftplus} or \c{centre}.
 

-\dt \I{\cw{\\cfg\{text-title-underline\}}}\cw{\\cfg\{text-title-underline\}\{}\e{underline-character}\cw{\}}
+\dt \I{\cw{\\cfg\{text-title-underline\}}}\cw{\\cfg\{text-title-underline\}\{}\e{underline-text}\cw{\}}

 
 \dd Specifies how the overall document title should be underlined.
 
 
 \dd Specifies how the overall document title should be underlined.
 


@@ -126,7 +127,7 @@ you might want to specify, for example,
 
 \dd Specifies the alignment of chapter and appendix headings.
 
 
 \dd Specifies the alignment of chapter and appendix headings.
 

-\dt \I{\cw{\\cfg\{text-chapter-underline\}}}\cw{\\cfg\{text-chapter-underline\}\{}\e{underline-character}\cw{\}}
+\dt \I{\cw{\\cfg\{text-chapter-underline\}}}\cw{\\cfg\{text-chapter-underline\}\{}\e{underline-text}\cw{\}}

 
 \dd Specifies how chapter and appendix headings should be underlined.
 
 
 \dd Specifies how chapter and appendix headings should be underlined.
 


@@ -143,7 +144,7 @@ be prefixed by \q{Chapter} or equivalent.
 
 \dd This specifies the suffix text to be appended to the chapter
 number, before displaying the chapter title. For example, if you set
 
 \dd This specifies the suffix text to be appended to the chapter
 number, before displaying the chapter title. For example, if you set

-this to \q{\cw{:\_}}, then the chapter title might look something
+this to \cq{:\_}, then the chapter title might look something

 like \q{Chapter 2: Doing Things}.
 
 \dt \I{\cw{\\cfg\{text-section-align\}}}\cw{\\cfg\{text-section-align\}\{}\e{level}\cw{\}\{}\e{alignment}\cw{\}}
 like \q{Chapter 2: Doing Things}.
 
 \dt \I{\cw{\\cfg\{text-section-align\}}}\cw{\\cfg\{text-section-align\}\{}\e{level}\cw{\}\{}\e{alignment}\cw{\}}


@@ -155,7 +156,7 @@ headings you want to affect: 0 means first-level headings (\c{\\H}),
 that (\c{\\S2}), and so on. The \e{alignment} parameter is treated
 just like the other alignment directives listed above.
 
 that (\c{\\S2}), and so on. The \e{alignment} parameter is treated
 just like the other alignment directives listed above.
 

-\dt \I{\cw{\\cfg\{text-section-underline\}}}\cw{\\cfg\{text-section-underline\}\{}\e{level}\cw{\}\{}\e{underline-character}\cw{\}}
+\dt \I{\cw{\\cfg\{text-section-underline\}}}\cw{\\cfg\{text-section-underline\}\{}\e{level}\cw{\}\{}\e{underline-text}\cw{\}}

 
 \dd Specifies how to underline section headings at a particular level.
 
 
 \dd Specifies how to underline section headings at a particular level.
 


@@ -171,22 +172,104 @@ be numeric only (if \c{true}).
 be appended to section numbers at a particular level, before
 displaying the section title.
 
 be appended to section numbers at a particular level, before
 displaying the section title.
 

-\S{output-text-misc} Miscellaneous configuration options
+\S{output-text-characters} Configuring the characters used

 
 

-\dt \I{\cw{\\cfg\{text-versionid\}}}\cw{\\cfg\{text-versionid\}\{}\e{boolean}\cw{\}}
+\dt \I\cw{\\cfg\{text-charset\}}\cw{\\cfg\{text-charset\}\{}\e{character set name}\cw{\}}

 
 

-\dd If this is set to \c{true}, \i{version ID paragraphs} (defined
-using the \i\c{\\versionid} command - see \k{input-blurb}) will be
-included at the bottom of the text file. If it is set to \c{false},
-they will be omitted completely.
+\dd This tells Halibut what \i{character set} the output should be
+in. Any Unicode characters representable in this set will be output
+verbatim; any other characters will not be output and their
+\i{fallback text} (if any) will be used instead.

 
 

-\dt \I{\cw{\\cfg\{text-bullet\}}}\cw{\\cfg\{text-bullet\}\{}\e{text}\cw{\}}
+\lcont{
+
+The character set names are the same as for
+\cw{\\cfg\{input-charset\}} (see \k{input-config}). However, unlike
+\cw{\\cfg\{input-charset\}}, this directive affects the \e{entire}
+output; it's not possible to switch encodings halfway through.
+
+}
+
+\dt \I{\cw{\\cfg\{text-bullet\}}}\cw{\\cfg\{text-bullet\}\{}\e{text}\cw{\}}[\cw{\{}\e{text}...\cw{\}}]

 
 \dd This specifies the text which should be used as the \i{bullet}
 in bulletted lists. It can be one character
 (\cw{\\cfg\{text-bullet\}\{-\}}), or more than one
 (\cw{\\cfg\{text-bullet\}\{(*)\}}).
 
 
 \dd This specifies the text which should be used as the \i{bullet}
 in bulletted lists. It can be one character
 (\cw{\\cfg\{text-bullet\}\{-\}}), or more than one
 (\cw{\\cfg\{text-bullet\}\{(*)\}}).
 

+\lcont{
+
+Like \cw{\\cfg\{quotes\}} (see \k{input-config}), you can specify multiple
+possible options after this command, and Halibut will choose the first one
+which the output character set supports. For example, you might write
+\cw{\\cfg\{text-bullet\}\{\\u2022\}\{\\u00b7\}\{*\}}, in which case
+Halibut would use the Unicode \q{BULLET} character where possible,
+fall back to the ISO-8859-1 \q{MIDDLE DOT} if that wasn't available,
+and resort to the ASCII asterisk if all else failed.
+
+}
+
+\dt \I{\cw{\\cfg\{text-rule\}}}\cw{\\cfg\{text-rule\}\{}\e{text}\cw{\}}[\cw{\{}\e{text}...\cw{\}}]
+
+\dd This specifies the text which should be used for drawing
+\i{horizontal rules} (generated by \i\c{\\rule}; see
+\k{input-rule}). It can be one character, or more than one. The
+string you specify will be repeated to reach the required width, so
+you can specify something like \cq{-=} to get a rule that looks
+like \cw{-=-=-=}.
+
+\lcont{
+
+Like \cw{\\cfg\{text-bullet\}}, you can specify multiple fallback
+options in this command.
+
+}
+
+\dt \I{\cw{\\cfg\{text-quotes\}}}\cw{\\cfg\{text-quotes\}\{}\e{open-quote}\cw{\}\{}\e{close-quote}\cw{\}}[\cw{\{}\e{open-quote}\cw{\}\{}\e{close-quote}...\cw{\}}]
+
+\dd This specifies a set of quote characters for the text backend,
+overriding any defined by \cw{\\cfg\{quotes\}}. It has the same syntax
+(see \k{input-config}).
+
+\lcont{
+
+In this backend, these quotes will also be used to mark text enclosed
+in the \c{\\c} command (see \k{input-code}).
+
+}
+
+\dt \I{\cw{\\cfg\{text-emphasis\}}}\cw{\\cfg\{text-emphasis\}\{}\e{start-emph}\cw{\}\{}\e{end-emph}\cw{\}}[\cw{\{}\e{start-emph}\cw{\}\{}\e{end-emph}...\cw{\}}]
+
+\dd This specifies the characters which should be used to surround
+emphasised text (written using the \c{\\e} command; see
+\k{input-emph}).
+
+\lcont{
+
+You should separately specify the start-emphasis and end-emphasis
+text, each of which can be more than one character if you want.
+Also, like \cw{\\cfg\{text-quotes\}}, you can specify multiple pairs
+of fallback options in this command, and Halibut will always use a
+matching pair.
+
+}
+
+\S{output-text-misc} Miscellaneous configuration options
+
+\dt \I{\cw{\\cfg\{text-list-suffix\}}}\cw{\\cfg\{text-list-suffix\}\{}\e{text}\cw{\}}
+
+\dd This text is appended to the number on a \i{numbered list} item
+(see \k{input-list-number}). So if you want to label your lists as
+\q{1)}, \q{2)} and so on, then you would write
+\cw{\\cfg\{text-list-suffix\}\{)\}}.
+
+\dt \I{\cw{\\cfg\{text-versionid\}}}\cw{\\cfg\{text-versionid\}\{}\e{boolean}\cw{\}}
+
+\dd If this is set to \c{true}, \i{version ID paragraphs} (defined
+using the \i\c{\\versionid} command - see \k{input-blurb}) will be
+included at the bottom of the text file. If it is set to \c{false},
+they will be omitted completely.
+

 \# FIXME: code indentation is configurable, therefore \quote
 \# indentation probably ought to be as well.
 
 \# FIXME: code indentation is configurable, therefore \quote
 \# indentation probably ought to be as well.
 


@@ -206,10 +289,10 @@ The \i{default settings} for Halibut's plain text output format are:
 \c \cfg{text-indent-preamble}{false}
 \c
 \c \cfg{text-title-align}{centre}
 \c \cfg{text-indent-preamble}{false}
 \c
 \c \cfg{text-title-align}{centre}

-\c \cfg{text-title-underline}{=}
+\c \cfg{text-title-underline}{\u2550}{=}

 \c
 \c \cfg{text-chapter-align}{left}
 \c
 \c \cfg{text-chapter-align}{left}

-\c \cfg{text-chapter-underline}{-}
+\c \cfg{text-chapter-underline}{\u203e}{-}

 \c \cfg{text-chapter-numeric}{false}
 \c \cfg{text-chapter-suffix}{: }
 \c
 \c \cfg{text-chapter-numeric}{false}
 \c \cfg{text-chapter-suffix}{: }
 \c


@@ -225,9 +308,21 @@ The \i{default settings} for Halibut's plain text output format are:
 \c
 \c ... and so on for all section levels below this ...
 \e iiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiii
 \c
 \c ... and so on for all section levels below this ...
 \e iiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiii

+\c
+\c \cfg{text-charset}{ASCII}
+\c \cfg{text-bullet}{\u2022}{-}
+\c \cfg{text-rule}{\u2500}{-}
+\c \cfg{text-quotes}{\u2018}{\u2019}{`}{'}
+\c \cfg{text-emphasis}{_}{_}
+\c
+\c \cfg{text-list-suffix}{.}
+\c \cfg{text-versionid}{true}

 
 \H{output-html} HTML
 
 
 \H{output-html} HTML
 

+\# FIXME: this probably needs major revision due to the new HTML
+backend
+

 This output format generates an \i{HTML} version of the document. By
 default, this will be in multiple files, starting with
 \c{Contents.html} and splitting the document into files by chapter
 This output format generates an \i{HTML} version of the document. By
 default, this will be in multiple files, starting with
 \c{Contents.html} and splitting the document into files by chapter


@@ -247,7 +342,7 @@ which is why all of the configuration directives start with the word
 \dd Sets the \i{output file name} in which to store the top-level
 contents page. Since this is the first page a user ought to see when
 beginning to read the document, a good choice in many cases might be
 \dd Sets the \i{output file name} in which to store the top-level
 contents page. Since this is the first page a user ought to see when
 beginning to read the document, a good choice in many cases might be

-\c{index.html} (but this is not the default, for historical
+\c{index.html} (although this is not the default, for historical

 reasons).
 
 \dt \I{\cw{\\cfg\{xhtml-index-filename\}}}\cw{\\cfg\{xhtml-index-filename\}\{}\e{filename}\cw{\}}
 reasons).
 
 \dt \I{\cw{\\cfg\{xhtml-index-filename\}}}\cw{\\cfg\{xhtml-index-filename\}\{}\e{filename}\cw{\}}


@@ -266,18 +361,18 @@ cent sign, you can write \c{%%}.)
 
 The formatting commands used in this template are:
 
 
 The formatting commands used in this template are:
 

-\dt \i\c{%N}
+\dt \I{%N-upper}\c{%N}

 
 \dd Expands to the visible title of the section, with white space
 
 \dd Expands to the visible title of the section, with white space

-removed. So in a chapter declared as \q{\cw{\\C\{fish\} Catching
-Fish}}, this formatting command would expand to
-\q{\cw{CatchingFish}}.
+removed. So in a chapter declared as \cq{\\C\{fish\} Catching
+Fish}, this formatting command would expand to
+\cq{CatchingFish}.

 
 \dt \i\c{%n}
 
 \dd Expands to the type and number of the section, without white
 
 \dt \i\c{%n}
 
 \dd Expands to the type and number of the section, without white

-space. So in chapter 1 this would expand to \q{\cw{Chapter1}}; in
-section A.4.3 it would expand to \q{\cw{SectionA.4.3}}, and so on.
+space. So in chapter 1 this would expand to \cq{Chapter1}; in
+section A.4.3 it would expand to \cq{SectionA.4.3}, and so on.

 If the section has no number (an unnumbered chapter created using
 \c{\\U}), this directive falls back to doing the same thing as
 \c{%N}.
 If the section has no number (an unnumbered chapter created using
 \c{\\U}), this directive falls back to doing the same thing as
 \c{%N}.


@@ -285,16 +380,16 @@ If the section has no number (an unnumbered chapter created using
 \dt \i\c{%b}
 
 \dd Expands to the bare number of the section. So in chapter 1 this
 \dt \i\c{%b}
 
 \dd Expands to the bare number of the section. So in chapter 1 this

-would expand to \q{\cw{1}}; in section A.4.3 it would expand to
-\q{\cw{A.4.3}}, and so on. If the section has no number (an
+would expand to \cq{1}; in section A.4.3 it would expand to
+\cq{A.4.3}, and so on. If the section has no number (an

 unnumbered chapter created using \c{\\U}), this directive falls back
 to doing the same thing as \c{%N}.
 
 \dt \i\c{%k}
 
 \dd Expands to the internal keyword specified in the section title.
 unnumbered chapter created using \c{\\U}), this directive falls back
 to doing the same thing as \c{%N}.
 
 \dt \i\c{%k}
 
 \dd Expands to the internal keyword specified in the section title.

-So in a chapter declared as \q{\cw{\\C\{fish\} Catching Fish}}, this
-formatting command would expand to \q{\cw{fish}}. If the section has
+So in a chapter declared as \cq{\\C\{fish\} Catching Fish}, this
+formatting command would expand to \cq{fish}. If the section has

 no keyword (an unnumbered chapter created using \c{\\U}), this
 directive falls back to doing the same thing as \c{%N}.
 
 no keyword (an unnumbered chapter created using \c{\\U}), this
 directive falls back to doing the same thing as \c{%N}.
 


@@ -465,10 +560,10 @@ be prefixed by \q{Chapter} or equivalent.
 
 \dd This specifies the suffix text to be appended to the chapter
 number, before displaying the chapter title. For example, if you set
 
 \dd This specifies the suffix text to be appended to the chapter
 number, before displaying the chapter title. For example, if you set

-this to \q{\cw{:\_}}, then the chapter title might look something
+this to \cq{:\_}, then the chapter title might look something

 like \q{Chapter 2: Doing Things}.
 
 like \q{Chapter 2: Doing Things}.
 

-\dt \I{\cw{\\cfg\{xhtml-section-numeric\}}}\cw{\\cfg\{xhtml-section-numeric\}\{}\e{boolean}\cw{\}}
+\dt \I{\cw{\\cfg\{xhtml-section-numeric\}}}\cw{\\cfg\{xhtml-section-numeric\}\{}\e{level}\cw{\}\{}\e{boolean}\cw{\}}

 
 \dd Specifies whether section headings at a particular level should
 contain the word \q{Section} or equivalent (if \c{false}), or should
 
 \dd Specifies whether section headings at a particular level should
 contain the word \q{Section} or equivalent (if \c{false}), or should


@@ -477,7 +572,7 @@ which level of section headings you want to affect: 0 means
 first-level headings (\c{\\H}), 1 means second-level headings
 (\c{\\S}), 2 means the level below that (\c{\\S2}), and so on.
 
 first-level headings (\c{\\H}), 1 means second-level headings
 (\c{\\S}), 2 means the level below that (\c{\\S2}), and so on.
 

-\dt \I{\cw{\\cfg\{xhtml-section-suffix\}}}\cw{\\cfg\{xhtml-section-suffix\}\{}\e{text}\cw{\}}
+\dt \I{\cw{\\cfg\{xhtml-section-suffix\}}}\cw{\\cfg\{xhtml-section-suffix\}\{}\e{level}\cw{\}\{}\e{text}\cw{\}}

 
 \dd Specifies the suffix text to be appended to section numbers at a
 particular level, before displaying the section title.
 
 \dd Specifies the suffix text to be appended to section numbers at a
 particular level, before displaying the section title.


@@ -488,10 +583,10 @@ particular level, before displaying the section title.
 
 \dd This directive lets you specify a \i{template}, with exactly the
 same syntax used in \cw{\\cfg\{xhtml-template-filename\}} (see
 
 \dd This directive lets you specify a \i{template}, with exactly the
 same syntax used in \cw{\\cfg\{xhtml-template-filename\}} (see

-\k{output-html-file}), to be used for the anchor names (\i\cw{A
-NAME="..."}) used to allow URLs to refer to specific sections within
-a particular HTML file. So if you set this to \q{\cw{%k}}, for
-example, then each individual section in your document will be
+\k{output-html-file}), to be used for the anchor names (\i\cw{<A
+NAME="...">}) used to allow URLs to refer to specific sections
+within a particular HTML file. So if you set this to \cq{%k},
+for example, then each individual section in your document will be

 addressable by means of a URL ending in a \c{#} followed by your
 internal section keyword.
 
 addressable by means of a URL ending in a \c{#} followed by your
 internal section keyword.
 


@@ -575,9 +670,14 @@ This output format generates data that can be used by the \i{Windows
 Help} program \cw{WINHELP.EXE}. There are two actual files
 generated, one ending in \c{.hlp} and the other ending in \c{.cnt}.
 
 Help} program \cw{WINHELP.EXE}. There are two actual files
 generated, one ending in \c{.hlp} and the other ending in \c{.cnt}.
 

+Currently, the output is harcoded to be in the \q{\i{Win1252}}
+character set.
+

 The Windows Help output format supports the following configuration
 directives:
 
 The Windows Help output format supports the following configuration
 directives:
 

+\S{output-whlp-file} Output file name
+

 \dt \I{\cw{\\cfg\{winhelp-filename\}}}\cw{\\cfg\{winhelp-filename\}\{}\e{filename}\cw{\}}
 
 \dd Sets the \i{output file name} in which to store the man page.
 \dt \I{\cw{\\cfg\{winhelp-filename\}}}\cw{\\cfg\{winhelp-filename\}\{}\e{filename}\cw{\}}
 
 \dd Sets the \i{output file name} in which to store the man page.


@@ -593,6 +693,42 @@ Halibut will append it. Halibut will also generate a contents file
 
 }
 
 
 }
 

+\S{output-whlp-characters} Configuring the characters used
+
+\dt \I{\cw{\\cfg\{winhelp-bullet\}}}\cw{\\cfg\{winhelp-bullet\}\{}\e{text}\cw{\}}[\cw{\{}\e{text}\cw{\}}...]
+
+\dd Specifies the text to use as the \i{bullet} in bulletted lists.
+You can specify multiple fallback options. Works exactly like the
+\cw{\\cfg\{text-bullet\}} directive (see
+\k{output-text-characters}).
+
+\dt \I{\cw{\\cfg\{winhelp-quotes\}}}\cw{\\cfg\{winhelp-quotes\}\{}\e{open-quote}\cw{\}\{}\e{close-quote}\cw{\}}[\cw{\{}\e{open-quote}\cw{\}\{}\e{close-quote}...\cw{\}}]
+
+\dd Specifies the quotation marks to use, overriding any
+\cw{\\cfg\{quotes\}} directive. You can specify multiple
+fallback options. Works exactly like the \cw{\\cfg\{text-quotes\}}
+directive (see \k{output-text-characters}).
+
+\S{output-whlp-misc} Miscellaneous configuration options
+
+\dt \I{\cw{\\cfg\{winhelp-contents-titlepage\}}}\cw{\\cfg\{winhelp-contents-titlepage\}\{}\e{title}\cw{\}}
+
+\dd Sets the text used to describe the help page containing the blurb
+(see \k{input-blurb}) and table of contents.
+
+\dt
+\I{\cw{\\cfg\{winhelp-section-suffix\}}}\cw{\\cfg\{winhelp-section-suffix\}\{}\e{text}\cw{\}}
+
+\dd Specifies the \I{suffix text, in section titles}suffix text to
+be appended to section numbers, before displaying the section title.
+(Applies to all levels.)
+
+\dt \I{\cw{\\cfg\{winhelp-list-suffix\}}}\cw{\\cfg\{winhelp-list-suffix\}\{}\e{text}\cw{\}}
+
+\dd This text is appended to the number on a \i{numbered list} item,
+in exactly the same way as \cw{\\cfg\{text-list-suffix\}} (see
+\k{output-text-characters}).
+

 \dt \I{\cw{\\cfg\{winhelp-topic\}}}\cw{\\cfg\{winhelp-topic\}\{}\e{topic-name}\cw{\}}
 
 \dd This directive defines a Windows \i{Help topic} name in the current
 \dt \I{\cw{\\cfg\{winhelp-topic\}}}\cw{\\cfg\{winhelp-topic\}\{}\e{topic-name}\cw{\}}
 
 \dd This directive defines a Windows \i{Help topic} name in the current


@@ -618,9 +754,18 @@ different help contexts which you can use in this way.
 
 }
 
 
 }
 

+\S{output-whlp-defaults} Default settings
+

 The \i{default settings} for the Windows Help output format are:
 
 \c \cfg{winhelp-filename}{output.hlp}
 The \i{default settings} for the Windows Help output format are:
 
 \c \cfg{winhelp-filename}{output.hlp}

+\c
+\c \cfg{winhelp-bullet}{\u2022}{-}
+\c \cfg{winhelp-quotes}{\u2018}{\u2019}{"}{"}
+\c
+\c \cfg{winhelp-contents-titlepage}{Title page}
+\c \cfg{winhelp-section-suffix}{: }
+\c \cfg{winhelp-list-suffix}{.}

 
 and no \c{\\cfg\{winhelp-topic\}} directives anywhere.
 
 
 and no \c{\\cfg\{winhelp-topic\}} directives anywhere.
 


@@ -632,6 +777,8 @@ macro package.
 
 The available configuration options for this format are as follows:
 
 
 The available configuration options for this format are as follows:
 

+\S{output-man-file} Output file name
+

 \dt \I{\cw{\\cfg\{man-filename\}}}\cw{\\cfg\{man-filename\}\{}\e{filename}\cw{\}}
 
 \dd Sets the \i{output file name} in which to store the man page.
 \dt \I{\cw{\\cfg\{man-filename\}}}\cw{\\cfg\{man-filename\}\{}\e{filename}\cw{\}}
 
 \dd Sets the \i{output file name} in which to store the man page.


@@ -639,6 +786,8 @@ This directive is implicitly generated if you provide a file name
 parameter after the command-line option \i\c{--man} (see
 \k{running-options}).
 
 parameter after the command-line option \i\c{--man} (see
 \k{running-options}).
 

+\S{output-man-identity} Configuring headers and footers
+

 \dt \I{\cw{\\cfg\{man-identity\}}}\cw{\\cfg\{man-identity\}\{}\e{text}\cw{\}\{}\e{text...}\cw{\}}
 
 \dd This directive is used to generate the initial \i{\c{.TH}
 \dt \I{\cw{\\cfg\{man-identity\}}}\cw{\\cfg\{man-identity\}\{}\e{text}\cw{\}\{}\e{text...}\cw{\}}
 
 \dd This directive is used to generate the initial \i{\c{.TH}


@@ -662,10 +811,13 @@ A traditional order for the arguments appears to be:
 
 For example, a typical \cw{man} page might contain
 
 
 For example, a typical \cw{man} page might contain
 

-\c \cfg{man-identity}{make-foo}{1}{June 2003}{foo-utils}{Fred Bloggs}
+\c \cfg{man-identity}{make-foo}{1}{June 2003}{foo-utils}{Fred
+\c Bloggs}

 
 }
 
 
 }
 

+\S{output-man-headings} Configuring heading display
+

 \dt \I{\cw{\\cfg\{man-headnumbers\}}}\cw{\\cfg\{man-headnumbers\}\{}\e{boolean}\cw{\}}
 
 \dd If this is set to \c{true}, then \i{section headings} in the
 \dt \I{\cw{\\cfg\{man-headnumbers\}}}\cw{\\cfg\{man-headnumbers\}\{}\e{boolean}\cw{\}}
 
 \dd If this is set to \c{true}, then \i{section headings} in the


@@ -704,7 +856,8 @@ simply says
 Then you have a file \c{make-foo.but}, and probably others like it
 as well, each of which looks something like this:
 
 Then you have a file \c{make-foo.but}, and probably others like it
 as well, each of which looks something like this:
 

-\c \cfg{man-identity}{make-foo}{1}{June 2003}{foo-utils}{Fred Bloggs}
+\c \cfg{man-identity}{make-foo}{1}{June 2003}{foo-utils}{Fred
+\c Bloggs}

 \c
 \c \H{man-foo} \cw{man} page for \c{make-foo}
 \c 
 \c
 \c \H{man-foo} \cw{man} page for \c{make-foo}
 \c 


@@ -734,12 +887,43 @@ expect.
 
 }
 
 
 }
 

+\S{output-man-characters} Configuring the characters used
+
+\dt \I{\cw{\\cfg\{man-charset\}}}\cw{\\cfg\{man-charset\}\{}\e{character set}\cw{\}}
+
+\dd Specifies what character set the output should be in, similarly to
+\cw{\\cfg\{text-charset\}} (see \k{output-text-characters}).
+
+\# FIXME: you're probably on your own in making sure that it's
+sensible to output man pages in that charset.
+
+\dt \I{\cw{\\cfg\{man-bullet\}}}\cw{\\cfg\{man-bullet\}\{}\e{text}\cw{\}}[\cw{\{}\e{text}\cw{\}}...]
+
+\dd Specifies the text to use as the \i{bullet} in bulletted lists.
+You can specify multiple fallback options. Works exactly like the
+\cw{\\cfg\{text-bullet\}} directive (see \k{output-text-characters}).
+
+\dt \I{\cw{\\cfg\{man-quotes\}}}\cw{\\cfg\{man-quotes\}\{}\e{open-quote}\cw{\}\{}\e{close-quote}\cw{\}}[\cw{\{}\e{open-quote}\cw{\}\{}\e{close-quote}...\cw{\}}]
+
+\dd Specifies the quotation marks to use, overriding any
+\cw{\\cfg\{quotes\}} directive. You can specify multiple
+fallback options. Works exactly like the \cw{\\cfg\{text-quotes\}}
+directive (see \k{output-text-characters}).
+
+\S{output-man-defaults} Default settings
+

 The \i{default settings} for the \cw{man} page output format are:
 
 \c \cfg{man-filename}{output.1}
 The \i{default settings} for the \cw{man} page output format are:
 
 \c \cfg{man-filename}{output.1}

+\c

 \c \cfg{man-identity}{}
 \c \cfg{man-identity}{}

+\c

 \c \cfg{man-headnumbers}{false}
 \c \cfg{man-mindepth}{0}
 \c \cfg{man-headnumbers}{false}
 \c \cfg{man-mindepth}{0}

+\c
+\c \cfg{man-charset}{ASCII}
+\c \cfg{man-bullet}{\u2022}{o}
+\c \cfg{man-quotes}{\u2018}{\u2019}{"}{"}

 
 \H{output-info} GNU \c{info}
 
 
 \H{output-info} GNU \c{info}
 


@@ -756,6 +940,8 @@ document.
 The \c{info} output format supports the following configuration
 directives:
 
 The \c{info} output format supports the following configuration
 directives:
 

+\S{output-info-file} Controlling the output filenames
+

 \dt \I{\cw{\\cfg\{info-filename\}}}\cw{\\cfg\{info-filename\}\{}\e{filename}\cw{\}}
 
 \dd Sets the output file name in which to store the \c{info} file.
 \dt \I{\cw{\\cfg\{info-filename\}}}\cw{\\cfg\{info-filename\}\{}\e{filename}\cw{\}}
 
 \dd Sets the output file name in which to store the \c{info} file.


@@ -791,6 +977,105 @@ split between files).
 
 }
 
 
 }
 

+\S{output-info-dimensions} Indentation and line width
+
+\dt \I{\cw{\\cfg\{info-width\}}}\cw{\\cfg\{info-width\}\{}\e{width}\cw{\}}
+
+\dd Sets the \I{text width}width of the main part of the document,
+in characters. Works exactly like the \cw{\\cfg\{text-width\}}
+directive (see \k{output-text-dimensions}).
+
+\dt \I{\cw{\\cfg\{info-indent-code\}}}\cw{\\cfg\{info-indent-code\}\{}\e{indent}\cw{\}}
+
+\dd Specifies the extra indentation for \I{code paragraphs,
+indentation} code paragraphs. Works exactly like the
+\cw{\\cfg\{text-indent-code\}} directive (see
+\k{output-text-dimensions}).
+
+\dt \I{\cw{\\cfg\{info-index-width\}}}\cw{\\cfg\{info-index-width\}\{}\e{width}\cw{\}}
+
+\dd Specifies how much horizontal space to leave in the index node
+for the text of \i{index terms}, before displaying the sections the
+terms occur in.
+
+\dt \I{\cw{\\cfg\{info-list-indent\}}}\cw{\\cfg\{info-list-indent\}\{}\e{indent}\cw{\}}
+
+\dd Specifies the extra indentation before the bullet or number in a
+\I{bulletted list, indentation}\I{numbered list, indentation}list
+item. Works exactly like the \cw{\\cfg\{text-list-indent\}}
+directive (see \k{output-text-dimensions}).
+
+\dt \I{\cw{\\cfg\{info-listitem-indent\}}}\cw{\\cfg\{info-listitem-indent\}\{}\e{indent}\cw{\}}
+
+\dd Specifies the additional indentation before the body of a list
+item. Works exactly like the \cw{\\cfg\{text-listitem-indent\}}
+directive (see \k{output-text-dimensions}).
+
+\S{output-info-headings} Configuring heading display
+
+\dt \I{\cw{\\cfg\{info-section-suffix\}}}\cw{\\cfg\{info-section-suffix\}\{}\e{text}\cw{\}}
+
+\dd Specifies the suffix text to be appended to each section number
+before displaying the section title. For example, if you set this to
+\cq{:\_}, then a typical section title might look something like
+\q{Section 3.1: Something Like This}.
+
+\dt \I{\cw{\\cfg\{info-underline\}}}\cw{\\cfg\{info-underline\}\{}\e{text}\cw{\}}[\cw{\{}\e{text}\cw{\}}...]
+
+\dd Specifies the text to be used to underline section titles. Works
+very much like the \cw{\\cfg\{text-chapter-underline\}} directive
+(see \k{output-text-headings}). You can specify more than one
+option, and Halibut will choose the first one supported by the
+character set.
+
+\S{output-info-characters} Controlling the characters used
+
+\dt \I{\cw{\\cfg\{info-charset\}}}\cw{\\cfg\{info-charset\}\{}\e{character set}\cw{\}}
+
+\dd Specifies what character set the output should be in, similarly to
+\cw{\\cfg\{text-charset\}} (see \k{output-text-characters}).
+
+\# FIXME: if you try sufficiently hard, you can probably find an
+output encoding that will break the info format by trampling on its
+special characters. So either don't do that, or tell us what we should
+do about it.
+
+\dt \I{\cw{\\cfg\{info-bullet\}}}\cw{\\cfg\{info-bullet\}\{}\e{text}\cw{\}}[\cw{\{}\e{text}\cw{\}}...]
+
+\dd Specifies the text to use as the \i{bullet} in bulletted lists.
+You can specify multiple fallback options. Works exactly like the
+\cw{\\cfg\{text-bullet\}} directive (see
+\k{output-text-characters}).
+
+\dt \I{\cw{\\cfg\{info-rule\}}}\cw{\\cfg\{info-rule\}\{}\e{text}\cw{\}}[\cw{\{}\e{text}\cw{\}}...]
+
+\dd Specifies the text used to draw \i{horizontal rules}. You can
+specify multiple fallback options. Works exactly like the
+\cw{\\cfg\{text-rule\}} directive (see \k{output-text-characters}).
+
+\dt \I{\cw{\\cfg\{info-quotes\}}}\cw{\\cfg\{info-quotes\}\{}\e{open-quote}\cw{\}\{}\e{close-quote}\cw{\}}[\cw{\{}\e{open-quote}\cw{\}\{}\e{close-quote}...\cw{\}}]
+
+\dd Specifies the quotation marks to use, overriding any
+\cw{\\cfg\{quotes\}} directive. You can specify multiple
+fallback options. Works exactly like the \cw{\\cfg\{text-quotes\}}
+directive (see \k{output-text-characters}).
+
+\dt \I{\cw{\\cfg\{info-emphasis\}}}\cw{\\cfg\{info-emphasis\}\{}\e{start-emph}\cw{\}\{}\e{end-emph}\cw{\}}[\cw{\{}\e{start-emph}\cw{\}\{}\e{end-emph}...\cw{\}}]
+
+\dd Specifies how to display emphasised text. You can specify
+multiple fallback options. Works exactly like the
+\cw{\\cfg\{text-emphasis\}} directive (see
+\k{output-text-characters}).
+
+\S{output-info-misc} Miscellaneous configuration options
+
+\dt \I{\cw{\\cfg\{info-list-suffix\}}}\cw{\\cfg\{info-list-suffix\}\{}\e{text}\cw{\}}
+
+\dd Specifies the text to append to the item numbers in a
+\i{numbered list}. Works exactly like the
+\cw{\\cfg\{text-list-suffix\}} directive (see
+\k{output-text-misc}).
+

 \dt \I{\cw{\\cfg\{info-dir-entry\}}}\cw{\\cfg\{info-dir-entry\}\{}\e{section}\cw{\}\{}\e{short
 name}\cw{\}\{}\e{long name}\cw{\}}[\cw{\{}\e{keyword}\cw{\}}]
 
 \dt \I{\cw{\\cfg\{info-dir-entry\}}}\cw{\\cfg\{info-dir-entry\}\{}\e{section}\cw{\}\{}\e{short
 name}\cw{\}\{}\e{long name}\cw{\}}[\cw{\{}\e{keyword}\cw{\}}]
 


@@ -830,7 +1115,8 @@ about assigning keywords to document sections).
 For example, in a document describing many game programs, the
 configuration directive
 
 For example, in a document describing many game programs, the
 configuration directive
 

-\c \cfg{info-dir-entry}{Games}{Chess}{Electronic chess game}{chess}
+\c \cfg{info-dir-entry}{Games}{Chess}{Electronic chess
+\c game}{chess}

 
 might produce text in the \c{dir} file looking something like this:
 
 
 might produce text in the \c{dir} file looking something like this:
 


@@ -841,3 +1127,284 @@ if the output file were called \c{mygames.info} and the keyword
 \c{chess} had been used to define Chapter 3 of the document.
 
 }
 \c{chess} had been used to define Chapter 3 of the document.
 
 }

+
+\S{output-info-defaults} Default settings
+
+The \i{default settings} for the \c{info} output format are:
+
+\c \cfg{info-filename}{output.info}
+\c \cfg{info-max-file-size}{65536}
+\c
+\c \cfg{info-width}{70}
+\c \cfg{info-indent-code}{2}
+\c \cfg{info-index-width}{40}
+\c \cfg{info-list-indent}{1}
+\c \cfg{info-listitem-indent}{3}
+\c
+\c \cfg{info-section-suffix}{: }
+\c \cfg{info-underline}{\u203e}{-}
+\c
+\c \cfg{info-charset}{ASCII}
+\c \cfg{info-bullet}{\u2022}{-}
+\c \cfg{info-rule}{\u2500}{-}
+\c \cfg{info-quotes}{\u2018}{\u2019}{`}{'}
+\c \cfg{info-emphasis}{_}{_}
+\c
+\c \cfg{info-list-suffix}{.}
+
+and no \cw{\\cfg\{info-dir-entry\}} directives.
+
+\H{output-paper} Paper formats
+
+These output formats (currently PostScript and PDF) generate printable
+manuals. As such, they share a number of configuration directives.
+
+\S{output-ps} \i{PostScript}
+
+This output format generates a printable manual in PostScript format.
+
+There is one configuration option specific to PostScript:
+
+\dt \I{\cw{\\cfg\{ps-filename\}}}\cw{\\cfg\{ps-filename\}\{}\e{filename}\cw{\}}
+
+\dd Sets the \i{output file name} in which to store the PostScript
+file. This directive is implicitly generated if you provide a file
+name parameter after the command-line option \i\c{--ps} (see
+\k{running-options}).
+
+The \i{default settings} for the PostScript output format are:
+
+\c \cfg{ps-filename}{output.ps}
+
+\S{output-pdf} \i{PDF}
+
+This output format generates a printable manual in PDF format. This
+should look exactly identical to the PostScript output (see
+\k{output-ps}), but also uses some PDF interactive features to
+provide an outline of all the document's sections and clickable
+cross-references between sections.
+
+There is one configuration option specific to PDF:
+
+\dt \I{\cw{\\cfg\{pdf-filename\}}}\cw{\\cfg\{pdf-filename\}\{}\e{filename}\cw{\}}
+
+\dd Sets the \i{output file name} in which to store the PDF file.
+This directive is implicitly generated if you provide a file name
+parameter after the command-line option \i\c{--pdf} (see
+\k{running-options}).
+
+The \i{default settings} for the PDF output format are:
+
+\c \cfg{pdf-filename}{output.pdf}
+
+\S{output-paper-dimensions} Configuring layout and \i{measurements}
+
+All measurements are in PostScript \i{points} (72 points to the inch).
+
+\S2{output-paper-pagesize} Page properties
+
+\dt \I{\cw{\\cfg\{paper-page-width\}}}\cw{\\cfg\{paper-page-width\}\{}\e{points}\cw{\}}
+
+\dt \I{\cw{\\cfg\{paper-page-height\}}}\cw{\\cfg\{paper-page-height\}\{}\e{points}\cw{\}}
+
+\dd Specify the absolute limits of the paper.
+
+\dt \I{\cw{\\cfg\{paper-left-margin\}}}\cw{\\cfg\{paper-left-margin\}\{}\e{points}\cw{\}}
+
+\dt \I{\cw{\\cfg\{paper-top-margin\}}}\cw{\\cfg\{paper-top-margin\}\{}\e{points}\cw{\}}
+
+\dt \I{\cw{\\cfg\{paper-right-margin\}}}\cw{\\cfg\{paper-right-margin\}\{}\e{points}\cw{\}}
+
+\dt \I{\cw{\\cfg\{paper-bottom-margin\}}}\cw{\\cfg\{paper-bottom-margin\}\{}\e{points}\cw{\}}
+
+\dd Specify the margins. Most text appears within these margins,
+except:
+
+\lcont{
+
+\b Section numbers, which appear in the left margin.
+
+\b The footer (containing page numbers), which appears in the bottom
+margin.
+
+}
+
+\S2{output-paper-line} Vertical spacing
+
+\dt \I{\cw{\\cfg\{paper-base-leading\}}}\cw{\\cfg\{paper-base-leading\}\{}\e{points}\cw{\}}
+
+\dd Specifies the amount of space between lines of text within a
+paragraph. (So, if the font size is 12pt and there is 2pt of leading,
+there will be 14pt between successive baselines.)
+
+\dt \I{\cw{\\cfg\{paper-base-para-spacing\}}}\cw{\\cfg\{paper-base-para-spacing\}\{}\e{points}\cw{\}}
+
+\dd Specifies the amount of vertical space between paragraphs. (The
+vertical space between paragraphs does \e{not} include
+\c{paper-base-leading}.)
+
+\S2{output-paper-indentation} Indentation
+
+\dt \I{\cw{\\cfg\{paper-list-indent\}}}\cw{\\cfg\{paper-list-indent\}\{}\e{points}\cw{\}}
+
+\dd Specifies the indentation of the bullet or number in a
+\I{bulletted list, indentation}bulletted or \I{numbered list,
+indentation}numbers \I{list, indentation}list, similarly to
+\cw{\\cfg\{text-list-indent\}} (see \k{output-text-dimensions}).
+
+\dt \I{\cw{\\cfg\{paper-listitem-indent\}}}\cw{\\cfg\{paper-listitem-indent\}\{}\e{points}\cw{\}}
+
+\dd Specifies the \e{extra} indentation for the body of a list item,
+over and above the amount configured in \cw{\\cfg\{paper-list-indent\}}.
+
+\# FIXME: doesn't actually work, AFAICT.
+
+\dt \I{\cw{\\cfg\{paper-quote-indent\}}}\cw{\\cfg\{paper-quote-indent\}\{}\e{points}\cw{\}}
+
+\dd Specifies the amount of indentation for a level of quoting. Used
+for \cw{\\quote} (see \k{input-quote}) and code quotes with \cw{\\c}
+(see \k{input-code}).
+
+\S2{output-paper-headings} Headings
+
+\dt \I{\cw{\\cfg\{paper-chapter-top-space\}}}\cw{\\cfg\{paper-chapter-top-space\}\{}\e{points}\cw{\}}
+
+\dd Specifies the space between the top margin \#{XXX check} and the
+top of the chapter heading. (Each chapter begins on a new page.)
+
+\# FIXME: the first page of the Index gets mangled if this is
+set to zero.
+
+\# FIXME: exact relationship to top-margin?
+
+\dt \I{\cw{\\cfg\{paper-chapter-underline-thickness\}}}\cw{\\cfg\{paper-chapter-underline-thickness\}\{}\e{points}\cw{\}}
+
+\dd Specifies the vertical thickness of the black rule under chapter
+headings.
+
+\dt \I{\cw{\\cfg\{paper-chapter-underline-depth\}}}\cw{\\cfg\{paper-chapter-underline-depth\}\{}\e{points}\cw{\}}
+
+\dd Specifies the distance between the base of the chapter heading and
+the \e{base} of the underlying rule.
+
+\dt \I{\cw{\\cfg\{paper-sect-num-left-space\}}}\cw{\\cfg\{paper-sect-num-left-space\}\{}\e{points}\cw{\}}
+
+\dd Specifies the distance between the left margin and the \e{right}
+of section numbers (which are in the left margin).
+
+\S2{output-paper-index} Contents and index
+
+\dt \I{\cw{\\cfg\{paper-contents-index-step\}}}\cw{\\cfg\{paper-contents-index-step\}\{}\e{points}\cw{\}}
+
+\dt \I{\cw{\\cfg\{paper-contents-margin\}}}\cw{\\cfg\{paper-contents-margin\}\{}\e{points}\cw{\}}
+
+\# FIXME: I do not know what dees one does. (I couldn't get either of
+them to do anything obvious, although the source indicates they should
+do something.)
+
+\dt \I{\cw{\\cfg\{paper-leader-separation\}}}\cw{\\cfg\{paper-leader-separation\}\{}\e{points}\cw{\}}
+
+\dd Specifies the horizontal spacing between dots in \i\e{leaders}
+(the dotted lines that appear between section headings and page
+numbers in the table of contents).
+
+\dt \I{\cw{\\cfg\{paper-footer-distance\}}}\cw{\\cfg\{paper-footer-distance\}\{}\e{points}\cw{\}}
+
+\dd Specifies the distance between the bottom margin and the \e{base}
+of the footer (which contains page numbers).
+
+\dt \I{\cw{\\cfg\{paper-index-columns\}}}\cw{\\cfg\{paper-index-columns\}\{}\e{columns}\cw{\}}
+
+\dd Specifies the number of columns the index should be divided into.
+
+\# FIXME: with this set to 1, the right-alignment of some index entry
+page numbers in the Halibut manual is decidedly wonky.
+
+\dt \I{\cw{\\cfg\{paper-index-gutter\}}}\cw{\\cfg\{paper-index-gutter\}\{}\e{points}\cw{\}}
+
+\dd Specifies the amount of \I{gutter} horizontal space between index
+columns.
+
+\dt \I{\cw{\\cfg\{paper-index-minsep\}}}\cw{\\cfg\{paper-index-minsep\}\{}\e{points}\cw{\}}
+
+\dd Specifies the minimum allowable horizontal space between an index
+entry and its page number. If the gap is smaller, the page number is
+moved to the next line.
+
+\S2{output-paper-fonts} Fonts
+
+\dt \I{\cw{\\cfg\{paper-base-font-size\}}}\cw{\\cfg\{paper-base-font-size\}\{}\e{points}\cw{\}}
+
+\dd Specifies the font size of body text.
+
+\# FIXME: actually, this doesn't appear to do anything at all - most
+font sizes are still hardcoded.
+
+\dt \I{\cw{\\cfg\{paper-pagenum-font-size\}}}\cw{\\cfg\{paper-pagenum-font-size\}\{}\e{points}\cw{\}}
+
+\dd Specifies the font size to use for page numbers.
+
+\S2{output-paper-misc} Miscellaneous
+
+\dt \I{\cw{\\cfg\{paper-rule-thickness\}}}\cw{\\cfg\{paper-rule-thickness\}\{}\e{points}\cw{\}}
+
+\dd Specifies the vertical thickness of the rule produced by the
+\cw{\\rule} command (see \k{input-rule}). (Note that no extra space is
+reserved for thicker rules.)
+
+\S{output-paper-characters} Configuring the characters used
+
+\dt \I{\cw{\\cfg\{paper-bullet\}}}\cw{\\cfg\{paper-bullet\}\{}\e{text}\cw{\}}[\cw{\{}\e{text}\cw{\}}...]
+
+\dd Specifies the text to use as the \i{bullet} in bulletted lists.
+You can specify multiple fallback options. Works exactly like the
+\cw{\\cfg\{text-bullet\}} directive (see
+\k{output-text-characters}).
+
+\dt \I{\cw{\\cfg\{paper-quotes\}}}\cw{\\cfg\{paper-quotes\}\{}\e{open-quote}\cw{\}\{}\e{close-quote}\cw{\}}[\cw{\{}\e{open-quote}\cw{\}\{}\e{close-quote}...\cw{\}}]
+
+\dd Specifies the quotation marks to use, overriding any
+\cw{\\cfg\{quotes\}} directive. You can specify multiple
+fallback options. Works exactly like the \cw{\\cfg\{text-quotes\}}
+directive (see \k{output-text-characters}).
+
+\S{output-paper-defaults} Default settings for paper formats
+
+The default page size corresponds to 210\_\u00D7{x}\_297\_mm, i.e.,
+\i{A4 paper}.
+
+\c \cfg{paper-page-width}{595} 
+\c \cfg{paper-page-height}{841} 
+\c
+\c \cfg{paper-left-margin}{72} 
+\c \cfg{paper-top-margin}{72} 
+\c \cfg{paper-right-margin}{72} 
+\c \cfg{paper-bottom-margin}{108} 
+\c
+\c \cfg{paper-base-leading}{1} 
+\c \cfg{paper-base-para-spacing}{10} 
+\c
+\c \cfg{paper-list-indent}{6} 
+\c \cfg{paper-listitem-indent}{18} 
+\c \cfg{paper-quote-indent}{18} 
+\c
+\c \cfg{paper-chapter-top-space}{72} 
+\c \cfg{paper-chapter-underline-thickness}{3} 
+\c \cfg{paper-chapter-underline-depth}{14} 
+\c \cfg{paper-sect-num-left-space}{12} 
+\c
+\c \cfg{paper-contents-index-step}{24} 
+\c \cfg{paper-contents-margin}{84} 
+\c \cfg{paper-leader-separation}{12} 
+\c \cfg{paper-footer-distance}{32} 
+\c \cfg{paper-index-columns}{2} 
+\c \cfg{paper-index-gutter}{36} 
+\c \cfg{paper-index-minsep}{18} 
+\c
+\c \cfg{paper-base-font-size}{12} 
+\c \cfg{paper-pagenum-font-size}{12} 
+\c
+\c \cfg{paper-rule-thickness}{1} 
+\c
+\c \cfg{paper-bullet}{\u2022}{-}
+\c \cfg{paper-quotes}{\u2018}{\u2019}{'}{'}