+\c
+\c \cfg{man-charset}{ASCII}
+\c \cfg{man-bullet}{\u2022}{o}
+\c \cfg{man-rule}{\u2500}{-}
+\c \cfg{man-quotes}{\u2018}{\u2019}{"}{"}
+
+\H{output-info} GNU \c{info}
+
+This output format generates files which can be used with the \i{GNU
+\c{info}} program.
+
+There are typically multiple output files: a primary file whose name
+usually ends in \c{.info}, and one or more subsidiary files whose
+names have numbers on the end, so that they end in \c{.info-1},
+\c{.info-2} and so on. Alternatively, this output format can be
+configured to output a single large file containing the whole
+document.
+
+The \c{info} output format supports the following configuration
+directives:
+
+\S{output-info-file} Controlling the output filenames
+
+\dt \I{\cw{\\cfg\{info-filename\}}}\cw{\\cfg\{info-filename\}\{}\e{filename}\cw{\}}
+
+\dd Sets the output file name in which to store the \c{info} file.
+This directive is implicitly generated if you provide a file name
+parameter after the command-line option \i\c{--info} (see
+\k{running-options}).
+
+\lcont{
+
+The suffixes \c{-1}, \c{-2}, \c{-3} and so on will be appended to
+your output file name to produce any subsidiary files required.
+
+Note that \c{info} files refer to their own names internally, so
+these files cannot be \I{renaming \c{info} files}renamed after
+creation and remain useful.
+
+}
+
+\dt \I{\cw{\\cfg\{info-max-file-size\}}}\cw{\\cfg\{info-max-file-size\}\{}\e{bytes}\cw{\}}
+
+\dd Sets the preferred \i{maximum file size} for each subsidiary
+file. As a special case, if you set this to zero, there will be no
+subsidiary files and the whole document will be placed in a single
+self-contained output file. (However, note that this file can still
+not be renamed usefully.)
+
+\lcont{
+
+The preferred maximum file size is only a guideline. Halibut may be
+forced to exceed it if a single section of the document is larger
+than the maximum size (since individual \c{info} nodes may not be
+split between files).
+
+}
+
+\S{output-info-dimensions} Indentation and line width
+
+\dt \I{\cw{\\cfg\{info-width\}}}\cw{\\cfg\{info-width\}\{}\e{width}\cw{\}}
+
+\dd Sets the \I{text width}width of the main part of the document,
+in characters. Works exactly like the \cw{\\cfg\{text-width\}}
+directive (see \k{output-text-dimensions}).
+
+\dt \I{\cw{\\cfg\{info-indent-code\}}}\cw{\\cfg\{info-indent-code\}\{}\e{indent}\cw{\}}
+
+\dd Specifies the extra indentation for \I{code paragraphs,
+indentation} code paragraphs. Works exactly like the
+\cw{\\cfg\{text-indent-code\}} directive (see
+\k{output-text-dimensions}).
+
+\dt \I{\cw{\\cfg\{info-index-width\}}}\cw{\\cfg\{info-index-width\}\{}\e{width}\cw{\}}
+
+\dd Specifies how much horizontal space to leave in the index node
+for the text of \i{index terms}, before displaying the sections the
+terms occur in.
+
+\dt \I{\cw{\\cfg\{info-list-indent\}}}\cw{\\cfg\{info-list-indent\}\{}\e{indent}\cw{\}}
+
+\dd Specifies the extra indentation before the bullet or number in a
+\I{bulletted list, indentation}\I{numbered list, indentation}list
+item. Works exactly like the \cw{\\cfg\{text-list-indent\}}
+directive (see \k{output-text-dimensions}).
+
+\dt \I{\cw{\\cfg\{info-listitem-indent\}}}\cw{\\cfg\{info-listitem-indent\}\{}\e{indent}\cw{\}}
+
+\dd Specifies the additional indentation before the body of a list
+item. Works exactly like the \cw{\\cfg\{text-listitem-indent\}}
+directive (see \k{output-text-dimensions}).
+
+\S{output-info-headings} Configuring heading display
+
+\dt \I{\cw{\\cfg\{info-section-suffix\}}}\cw{\\cfg\{info-section-suffix\}\{}\e{text}\cw{\}}
+
+\dd Specifies the suffix text to be appended to each section number
+before displaying the section title. For example, if you set this to
+\cq{:\_}, then a typical section title might look something like
+\q{Section 3.1: Something Like This}.
+
+\dt \I{\cw{\\cfg\{info-underline\}}}\cw{\\cfg\{info-underline\}\{}\e{text}\cw{\}}[\cw{\{}\e{text}\cw{\}}...]
+
+\dd Specifies the text to be used to underline section titles. Works
+very much like the \cw{\\cfg\{text-chapter-underline\}} directive
+(see \k{output-text-headings}). You can specify more than one
+option, and Halibut will choose the first one supported by the
+character set.
+
+\S{output-info-characters} Controlling the characters used
+
+\dt \I{\cw{\\cfg\{info-charset\}}}\cw{\\cfg\{info-charset\}\{}\e{character set}\cw{\}}
+
+\dd Specifies what character set the output should be in, similarly to
+\cw{\\cfg\{text-charset\}} (see \k{output-text-characters}).
+
+\# FIXME: if you try sufficiently hard, you can probably find an
+output encoding that will break the info format by trampling on its
+special characters. So either don't do that, or tell us what we should
+do about it.
+
+\dt \I{\cw{\\cfg\{info-bullet\}}}\cw{\\cfg\{info-bullet\}\{}\e{text}\cw{\}}[\cw{\{}\e{text}\cw{\}}...]
+
+\dd Specifies the text to use as the \i{bullet} in bulletted lists.
+You can specify multiple fallback options. Works exactly like the
+\cw{\\cfg\{text-bullet\}} directive (see
+\k{output-text-characters}).
+
+\dt \I{\cw{\\cfg\{info-rule\}}}\cw{\\cfg\{info-rule\}\{}\e{text}\cw{\}}[\cw{\{}\e{text}\cw{\}}...]
+
+\dd Specifies the text used to draw \i{horizontal rules}. You can
+specify multiple fallback options. Works exactly like the
+\cw{\\cfg\{text-rule\}} directive (see \k{output-text-characters}).
+
+\dt \I{\cw{\\cfg\{info-quotes\}}}\cw{\\cfg\{info-quotes\}\{}\e{open-quote}\cw{\}\{}\e{close-quote}\cw{\}}[\cw{\{}\e{open-quote}\cw{\}\{}\e{close-quote}...\cw{\}}]
+
+\dd Specifies the quotation marks to use, overriding any
+\cw{\\cfg\{quotes\}} directive. You can specify multiple
+fallback options. Works exactly like the \cw{\\cfg\{text-quotes\}}
+directive (see \k{output-text-characters}).
+
+\dt \I{\cw{\\cfg\{info-emphasis\}}}\cw{\\cfg\{info-emphasis\}\{}\e{start-emph}\cw{\}\{}\e{end-emph}\cw{\}}[\cw{\{}\e{start-emph}\cw{\}\{}\e{end-emph}...\cw{\}}]
+
+\dd Specifies how to display emphasised text. You can specify
+multiple fallback options. Works exactly like the
+\cw{\\cfg\{text-emphasis\}} directive (see
+\k{output-text-characters}).
+
+\S{output-info-misc} Miscellaneous configuration options
+
+\dt \I{\cw{\\cfg\{info-list-suffix\}}}\cw{\\cfg\{info-list-suffix\}\{}\e{text}\cw{\}}
+
+\dd Specifies the text to append to the item numbers in a
+\i{numbered list}. Works exactly like the
+\cw{\\cfg\{text-list-suffix\}} directive (see
+\k{output-text-misc}).
+
+\dt \I{\cw{\\cfg\{info-dir-entry\}}}\cw{\\cfg\{info-dir-entry\}\{}\e{section}\cw{\}\{}\e{short
+name}\cw{\}\{}\e{long name}\cw{\}}[\cw{\{}\e{keyword}\cw{\}}]
+
+\dd Constructs an \i\cw{INFO-DIR-ENTRY} section and places it in the
+header of the Info file. This mechanism is used to automatically
+generate the \i{\c{dir} file} at the root of a Unix system's
+\c{info} collection.
+
+\lcont{
+
+The parameters to this directive are:
+
+\dt \e{section}
+
+\dd Specifies the section of the \c{dir} file in which you want your
+document referenced. For example, \q{Development}, or \q{Games}, or
+\q{Miscellaneous}.
+
+\dt \e{short name}
+
+\dd Specifies a short name for the directory entry, which will
+appear at the start of the menu line.
+
+\dt \e{long name}
+
+\dd Specifies a long name for the directory entry, which will appear
+at the end of the menu line.
+
+\dt \e{keyword}
+
+\dd This parameter is optional. If it is present, then the directory
+entry will cause a jump to a particular subsection of your document,
+rather than starting at the top. The subsection will be the one
+referred to by the given keyword (see \k{input-sections} for details
+about assigning keywords to document sections).
+
+For example, in a document describing many game programs, the
+configuration directive
+
+\c \cfg{info-dir-entry}{Games}{Chess}{Electronic chess
+\c game}{chess}
+
+might produce text in the \c{dir} file looking something like this:
+
+\c Games
+\c * Chess: (mygames)Chapter 3. Electronic chess game
+
+if the output file were called \c{mygames.info} and the keyword
+\c{chess} had been used to define Chapter 3 of the document.
+
+}
+
+\S{output-info-defaults} Default settings
+
+The \i{default settings} for the \c{info} output format are:
+
+\c \cfg{info-filename}{output.info}
+\c \cfg{info-max-file-size}{65536}
+\c
+\c \cfg{info-width}{70}
+\c \cfg{info-indent-code}{2}
+\c \cfg{info-index-width}{40}
+\c \cfg{info-list-indent}{1}
+\c \cfg{info-listitem-indent}{3}
+\c
+\c \cfg{info-section-suffix}{: }
+\c \cfg{info-underline}{\u203e}{-}
+\c
+\c \cfg{info-charset}{ASCII}
+\c \cfg{info-bullet}{\u2022}{-}
+\c \cfg{info-rule}{\u2500}{-}
+\c \cfg{info-quotes}{\u2018}{\u2019}{`}{'}
+\c \cfg{info-emphasis}{_}{_}
+\c
+\c \cfg{info-list-suffix}{.}
+
+and no \cw{\\cfg\{info-dir-entry\}} directives.
+
+\H{output-paper} Paper formats
+
+These output formats (currently PDF and PostScript) generate printable
+manuals. As such, they share a number of configuration directives.
+
+\S{output-pdf} \i{PDF}
+
+This output format generates a printable manual in PDF format. In
+addition, it uses some PDF interactive features to
+provide an outline of all the document's sections and clickable
+cross-references between sections.
+
+There is one configuration option specific to PDF:
+
+\dt \I{\cw{\\cfg\{pdf-filename\}}}\cw{\\cfg\{pdf-filename\}\{}\e{filename}\cw{\}}
+
+\dd Sets the \i{output file name} in which to store the PDF file.
+This directive is implicitly generated if you provide a file name
+parameter after the command-line option \i\c{--pdf} (see
+\k{running-options}).
+
+The \i{default settings} for the PDF output format are:
+
+\c \cfg{pdf-filename}{output.pdf}
+
+\S{output-ps} \i{PostScript}
+
+This output format generates a printable manual in PostScript format.
+This should look exactly identical to the PDF output (see
+\k{output-ps}), and uses \i\c{pdfmark} to arrange that if converted
+to PDF it will contain the same interactive features.
+
+There is one configuration option specific to PostScript:
+
+\dt \I{\cw{\\cfg\{ps-filename\}}}\cw{\\cfg\{ps-filename\}\{}\e{filename}\cw{\}}
+
+\dd Sets the \i{output file name} in which to store the PostScript
+file. This directive is implicitly generated if you provide a file
+name parameter after the command-line option \i\c{--ps} (see
+\k{running-options}).
+
+The \i{default settings} for the PostScript output format are:
+
+\c \cfg{ps-filename}{output.ps}
+
+\S{output-paper-dimensions} Configuring layout and \i{measurements}
+
+All measurements are in PostScript \i{points} (72 points to the inch).
+
+\S2{output-paper-pagesize} Page properties
+
+\dt \I{\cw{\\cfg\{paper-page-width\}}}\cw{\\cfg\{paper-page-width\}\{}\e{points}\cw{\}}
+
+\dt \I{\cw{\\cfg\{paper-page-height\}}}\cw{\\cfg\{paper-page-height\}\{}\e{points}\cw{\}}
+
+\dd Specify the absolute limits of the paper.
+
+\dt \I{\cw{\\cfg\{paper-left-margin\}}}\cw{\\cfg\{paper-left-margin\}\{}\e{points}\cw{\}}
+
+\dt \I{\cw{\\cfg\{paper-top-margin\}}}\cw{\\cfg\{paper-top-margin\}\{}\e{points}\cw{\}}
+
+\dt \I{\cw{\\cfg\{paper-right-margin\}}}\cw{\\cfg\{paper-right-margin\}\{}\e{points}\cw{\}}
+
+\dt \I{\cw{\\cfg\{paper-bottom-margin\}}}\cw{\\cfg\{paper-bottom-margin\}\{}\e{points}\cw{\}}
+
+\dd Specify the margins. Most text appears within these margins,
+except:
+
+\lcont{
+
+\b Section numbers, which appear in the left margin.
+
+\b The footer (containing page numbers), which appears in the bottom
+margin.
+
+}
+
+\S2{output-paper-line} Vertical spacing
+
+\dt \I{\cw{\\cfg\{paper-base-leading\}}}\cw{\\cfg\{paper-base-leading\}\{}\e{points}\cw{\}}
+
+\dd Specifies the amount of space between lines of text within a
+paragraph. (So, if the font size is 12pt and there is 2pt of leading,
+there will be 14pt between successive baselines.)
+
+\dt \I{\cw{\\cfg\{paper-base-para-spacing\}}}\cw{\\cfg\{paper-base-para-spacing\}\{}\e{points}\cw{\}}
+
+\dd Specifies the amount of vertical space between paragraphs. (The
+vertical space between paragraphs does \e{not} include
+\c{paper-base-leading}.)
+
+\S2{output-paper-indentation} Indentation
+
+\dt \I{\cw{\\cfg\{paper-list-indent\}}}\cw{\\cfg\{paper-list-indent\}\{}\e{points}\cw{\}}
+
+\dd Specifies the indentation of the bullet or number in a
+\I{bulletted list, indentation}bulletted or \I{numbered list,
+indentation}numbered \I{list, indentation}list, similarly to
+\cw{\\cfg\{text-list-indent\}} (see \k{output-text-dimensions}).
+
+\dt \I{\cw{\\cfg\{paper-listitem-indent\}}}\cw{\\cfg\{paper-listitem-indent\}\{}\e{points}\cw{\}}
+
+\dd Specifies the \e{extra} indentation for the body of a list item,
+over and above the amount configured in \cw{\\cfg\{paper-list-indent\}}.
+
+\# FIXME: doesn't actually work, AFAICT.
+
+\dt \I{\cw{\\cfg\{paper-quote-indent\}}}\cw{\\cfg\{paper-quote-indent\}\{}\e{points}\cw{\}}
+
+\dd Specifies the amount of indentation for a level of quoting. Used
+for \cw{\\quote} (see \k{input-quote}) and code quotes with \cw{\\c}
+(see \k{input-code}).
+
+\S2{output-paper-headings} Headings
+
+\dt \I{\cw{\\cfg\{paper-chapter-top-space\}}}\cw{\\cfg\{paper-chapter-top-space\}\{}\e{points}\cw{\}}
+
+\dd Specifies the space between the top margin and the top of the
+chapter heading. (Each chapter begins on a new page.)
+
+\dt \I{\cw{\\cfg\{paper-chapter-underline-thickness\}}}\cw{\\cfg\{paper-chapter-underline-thickness\}\{}\e{points}\cw{\}}
+
+\dd Specifies the vertical thickness of the black rule under chapter
+headings.
+
+\dt \I{\cw{\\cfg\{paper-chapter-underline-depth\}}}\cw{\\cfg\{paper-chapter-underline-depth\}\{}\e{points}\cw{\}}
+
+\dd Specifies the distance between the base of the chapter heading and
+the \e{base} of the underlying rule.
+
+\dt \I{\cw{\\cfg\{paper-sect-num-left-space\}}}\cw{\\cfg\{paper-sect-num-left-space\}\{}\e{points}\cw{\}}
+
+\dd Specifies the distance between the left margin and the \e{right}
+of section numbers (which are in the left margin).
+
+\S2{output-paper-index} Contents and index
+
+\dt \I{\cw{\\cfg\{paper-contents-index-step\}}}\cw{\\cfg\{paper-contents-index-step\}\{}\e{points}\cw{\}}
+
+\dt \I{\cw{\\cfg\{paper-contents-margin\}}}\cw{\\cfg\{paper-contents-margin\}\{}\e{points}\cw{\}}
+
+\# FIXME: I do not know what dees one does. (I couldn't get either of
+them to do anything obvious, although the source indicates they should
+do something.)
+
+\dt \I{\cw{\\cfg\{paper-leader-separation\}}}\cw{\\cfg\{paper-leader-separation\}\{}\e{points}\cw{\}}
+
+\dd Specifies the horizontal spacing between dots in \i\e{leaders}
+(the dotted lines that appear between section headings and page
+numbers in the table of contents).
+
+\dt \I{\cw{\\cfg\{paper-footer-distance\}}}\cw{\\cfg\{paper-footer-distance\}\{}\e{points}\cw{\}}
+
+\dd Specifies the distance between the bottom margin and the \e{base}
+of the footer (which contains page numbers).
+
+\dt \I{\cw{\\cfg\{paper-index-columns\}}}\cw{\\cfg\{paper-index-columns\}\{}\e{columns}\cw{\}}
+
+\dd Specifies the number of columns the index should be divided into.
+
+\# FIXME: with this set to 1, the right-alignment of some index entry
+page numbers in the Halibut manual is decidedly wonky.
+
+\dt \I{\cw{\\cfg\{paper-index-gutter\}}}\cw{\\cfg\{paper-index-gutter\}\{}\e{points}\cw{\}}
+
+\dd Specifies the amount of \I{gutter} horizontal space between index
+columns.
+
+\dt \I{\cw{\\cfg\{paper-index-minsep\}}}\cw{\\cfg\{paper-index-minsep\}\{}\e{points}\cw{\}}
+
+\dd Specifies the minimum allowable horizontal space between an index
+entry and its page number. If the gap is smaller, the page number is
+moved to the next line.
+
+\S2{output-paper-fonts} \ii{Fonts}
+
+The directives in this section control which fonts Halibut uses for
+various kinds of text. Directives for setting the font normally take
+three font names, the first of which is used for normal text, the
+second for emphasised text, and the third for code. Any fonts which
+aren't specified are left unchanged. Fonts are named using their
+PostScript names.
+
+Halibut intrinsically knows about some fonts, and these fonts are also
+built into all PDF and most PostScript implementations. These are:
+
+\b \cw{Times-Roman}
+
+\b \cw{Times-Italic}
+
+\b \cw{Times-Bold}
+
+\b \cw{Times-BoldItalic}
+
+\b \cw{Helvetica}
+
+\b \cw{Helvetica-Oblique}
+
+\b \cw{Helvetica-Bold}
+
+\b \cw{Helvetica-BoldOblique}
+
+\b \cw{Courier}
+
+\b \cw{Courier-Oblique}
+
+\b \cw{Courier-Bold}
+
+\b \cw{Courier-BoldOblique}
+
+These fonts can be used without further formality. To use any other font,
+Halibut needs at least to know its measurements, which are provided in an
+\i{Adobe Font Metrics} (\I{AFM files}AFM) file. Halibut can also
+\I{embedding fonts}embed
+\i{Type 1 fonts} in its PDF and PostScript output if provided with an
+ASCII-format (\I{PFA files}PFA) font file. To provide an AFM or PFA file
+to Halibut, simply name it on Halibut's command line. If both are named,
+the AFM file must come first.
+
+\ii{Font sizes} are specified in PostScript \i{points} (72 to the inch).
+
+\dt \I{\cw{\\cfg\{paper-title-fonts\}}}\cw{\\cfg\{paper-title-fonts\}\{}\e{normal-font}\cw{\}}[\cw{\{}\e{emph-font}\cw{\}}[\cw{\{}\e{code-font}\cw{\}}]]
+
+\dd Specifies the fonts to use for text in the document title.
+
+\dt \I{\cw{\\cfg\{paper-title-font-size\}}}\cw{\\cfg\{paper-title-font-size\}\{}\e{points}\cw{\}}
+
+\dd Specifies the \i{font size} of the document title.
+
+\dt \I{\cw{\\cfg\{paper-chapter-fonts\}}}\cw{\\cfg\{paper-chapter-fonts\}\{}\e{normal-font}\cw{\}}[\cw{\{}\e{emph-font}\cw{\}}[\cw{\{}\e{code-font}\cw{\}}]]
+
+\dd Specifies the fonts to use for text in chapter titles.
+
+\dt \I{\cw{\\cfg\{paper-chapter-font-size\}}}\cw{\\cfg\{paper-chapter-font-size\}\{}\e{points}\cw{\}}
+
+\dd Specifies the \i{font size} of chapter titles.
+
+\dt \I{\cw{\\cfg\{paper-section-fonts\}}}\cw{\\cfg\{paper-section-fonts\}\{}\e{level}\cw{\}\{}\e{normal-font}\cw{\}}[\cw{\{}\e{emph-font}\cw{\}}[\cw{\{}\e{code-font}\cw{\}}]]
+
+\dd Specifies the fonts to use for text in section headings at the \e{level}
+specified.
+
+\dt \I{\cw{\\cfg\{paper-section-font-size\}}}\cw{\\cfg\{paper-section-font-size\}\{}\e{level}\cw{\}\{}\e{points}\cw{\}}
+
+\dd Specifies the \i{font size} of section headings at the \e{level}
+specified.
+
+\dt \I{\cw{\\cfg\{paper-base-fonts\}}}\cw{\\cfg\{paper-base-fonts\}\{}\e{normal-font}\cw{\}}[\cw{\{}\e{emph-font}\cw{\}}[\cw{\{}\e{code-font}\cw{\}}]]
+
+\dd Specifies the fonts to use for text in the body text.
+
+\dt \I{\cw{\\cfg\{paper-base-font-size\}}}\cw{\\cfg\{paper-base-font-size\}\{}\e{points}\cw{\}}
+
+\dd Specifies the \i{font size} of body text.
+
+\dt \I{\cw{\\cfg\{paper-code-fonts\}}}\cw{\\cfg\{paper-code-fonts\}\{}\e{bold-font}\cw{\}}[\cw{\{}\e{italic-font}\cw{\}}[\cw{\{}\e{normal-font}\cw{\}}]]
+
+\dd Specifies the fonts to use for text in code paragraps. The
+\e{bold-font} is used for bold text, the \e{italic-font} for
+emphasised text, and the \e{normal-font} for normal code.
+
+\dt \I{\cw{\\cfg\{paper-code-font-size\}}}\cw{\\cfg\{paper-code-font-size\}\{}\e{points}\cw{\}}
+
+\dd Specifies the \i{font size} of text in code paragraphs.
+
+\dt \I{\cw{\\cfg\{paper-pagenum-font-size\}}}\cw{\\cfg\{paper-pagenum-font-size\}\{}\e{points}\cw{\}}
+
+\dd Specifies the font size to use for \i{page numbers}.
+
+\S2{output-paper-misc} Miscellaneous
+
+\dt \I{\cw{\\cfg\{paper-rule-thickness\}}}\cw{\\cfg\{paper-rule-thickness\}\{}\e{points}\cw{\}}
+
+\dd Specifies the vertical thickness of the rule produced by the
+\cw{\\rule} command (see \k{input-rule}). (Note that no extra space is
+reserved for thicker rules.)
+
+\S{output-paper-characters} Configuring the characters used
+
+\dt \I{\cw{\\cfg\{paper-bullet\}}}\cw{\\cfg\{paper-bullet\}\{}\e{text}\cw{\}}[\cw{\{}\e{text}\cw{\}}...]
+
+\dd Specifies the text to use as the \i{bullet} in bulletted lists.
+You can specify multiple fallback options. Works exactly like the
+\cw{\\cfg\{text-bullet\}} directive (see
+\k{output-text-characters}).
+
+\dt \I{\cw{\\cfg\{paper-quotes\}}}\cw{\\cfg\{paper-quotes\}\{}\e{open-quote}\cw{\}\{}\e{close-quote}\cw{\}}[\cw{\{}\e{open-quote}\cw{\}\{}\e{close-quote}...\cw{\}}]
+
+\dd Specifies the quotation marks to use, overriding any
+\cw{\\cfg\{quotes\}} directive. You can specify multiple
+fallback options. Works exactly like the \cw{\\cfg\{text-quotes\}}
+directive (see \k{output-text-characters}).
+
+\S{output-paper-defaults} Default settings for paper formats
+
+The default page size corresponds to 210\_\u00D7{x}\_297\_mm, i.e.,
+\i{A4 paper}.
+
+\c \cfg{paper-page-width}{595}
+\c \cfg{paper-page-height}{842}
+\c
+\c \cfg{paper-left-margin}{72}
+\c \cfg{paper-top-margin}{72}
+\c \cfg{paper-right-margin}{72}
+\c \cfg{paper-bottom-margin}{108}
+\c
+\c \cfg{paper-base-leading}{1}
+\c \cfg{paper-base-para-spacing}{10}
+\c
+\c \cfg{paper-list-indent}{6}
+\c \cfg{paper-listitem-indent}{18}
+\c \cfg{paper-quote-indent}{18}
+\c
+\c \cfg{paper-chapter-top-space}{72}
+\c \cfg{paper-chapter-underline-thickness}{3}
+\c \cfg{paper-chapter-underline-depth}{14}
+\c \cfg{paper-sect-num-left-space}{12}
+\c
+\c \cfg{paper-contents-index-step}{24}
+\c \cfg{paper-contents-margin}{84}
+\c \cfg{paper-leader-separation}{12}
+\c \cfg{paper-footer-distance}{32}
+\c \cfg{paper-index-columns}{2}
+\c \cfg{paper-index-gutter}{36}
+\c \cfg{paper-index-minsep}{18}
+\c
+\c \cfg{paper-base-fonts}{Times-Roman}{Times-Italic}{Courier}
+\c \cfg{paper-base-font-size}{12}
+\c \cfg{paper-code-fonts}{Courier-Bold}{Courier-Oblique}{Courier}
+\c \cfg{paper-code-font-size}{12}
+\c \cfg{paper-title-fonts}{Helvetica-Bold}
+\c {Helvetica-BoldOblique}{Courier-Bold}
+\c \cfg{paper-title-font-size}{24}
+\c \cfg{paper-chapter-fonts}{Helvetica-Bold}
+\c {Helvetica-BoldOblique}{Courier-Bold}
+\c \cfg{paper-chapter-font-size}{20}
+\c \cfg{paper-section-fonts}{0}{Helvetica-Bold}
+\c {Helvetica-BoldOblique}{Courier-Bold}
+\c \cfg{paper-section-font-size}{0}{16}
+\c \cfg{paper-section-fonts}{1}{Helvetica-Bold}
+\c {Helvetica-BoldOblique}{Courier-Bold}
+\c \cfg{paper-section-font-size}{1}{14}
+\c \cfg{paper-section-fonts}{2}{Helvetica-Bold}
+\c {Helvetica-BoldOblique}{Courier-Bold}
+\c \cfg{paper-section-font-size}{2}{13}
+\c ... and so on for all section levels below this ...
+\e iiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiii
+\c
+\c \cfg{paper-pagenum-font-size}{12}
+\c
+\c \cfg{paper-rule-thickness}{1}
+\c
+\c \cfg{paper-bullet}{\u2022}{-}
+\c \cfg{paper-quotes}{\u2018}{\u2019}{'}{'}