\H{output-text} Plain text
This output format generates the document as a single \i{plain text}
-file.
-
-The output file is currently assumed to be in the \i{ISO 8859-1}
-character set. Any Unicode characters representable in this set will
-be output verbatim; any other characters will not be output and
-their \i{fallback text} (if any) will be used instead.
+file. No index is generated.
The precise formatting of the text file can be controlled by a
variety of configuration directives. They are listed in the
Also, several of the directives below specify how a title should be
\I{underlining}underlined. The parameter to one of these directives
-should be either blank (\cw{\{\}}) or a single character. In the
-latter case, that character will be used to underline the title. So
-you might want to specify, for example,
-\cw{\\text-title-underline\{=\}} but
-\cw{\\text-chapter-underline\{-\}}.
+should be either blank (\cw{\{\}}) or a piece of text which will be
+repeated to produce the underline. So you might want to specify, for
+example, \cw{\\text-title-underline\{=\}} but
+\cw{\\text-chapter-underline\{\-\}}.
+
+You can also specify more than one underline setting, and Halibut
+will choose the first one that the output character set supports.
+So, for example, you could write
+\cw{\\text-chapter-underline\{\u203e\}\{\-\}}, and Halibut would use
+the Unicode \q{OVERLINE} character where possible and fall back to
+the ASCII minus sign otherwise.
\dt \I{\cw{\\cfg\{text-title-align\}}}\cw{\\cfg\{text-title-align\}\{}\e{alignment}\cw{\}}
be appended to section numbers at a particular level, before
displaying the section title.
+\S{output-text-characters} Configuring the characters used
+
+\dt \I{\cw{\\cfg\{text-bullet\}}}\cw{\\cfg\{text-bullet\}\{}\e{text}\cw{\}}[\cw{\{}\e{text}...\cw{\}}]
+
+\dd This specifies the text which should be used as the \i{bullet}
+in bulletted lists. It can be one character
+(\cw{\\cfg\{text-bullet\}\{-\}}), or more than one
+(\cw{\\cfg\{text-bullet\}\{(*)\}}).
+
+\lcont{
+
+Like \cw{\\cfg\{quotes\}} (see \k{input-config}), you can specify multiple
+possible options after this command, and Halibut will choose the first one
+which the output character set supports. For example, you might write
+\cw{\\cfg\{text-bullet\}\{\\u2022\}\{\\u00b7\}\{*\}}, in which case
+Halibut would use the Unicode \q{BULLET} character where possible,
+fall back to the ISO-8859-1 \q{MIDDLE DOT} if that wasn't available,
+and resort to the ASCII asterisk if all else failed.
+
+}
+
+\dt \I{\cw{\\cfg\{text-rule\}}}\cw{\\cfg\{text-rule\}\{}\e{text}\cw{\}}[\cw{\{}\e{text}...\cw{\}}]
+
+\dd This specifies the text which should be used for drawing
+\i{horizontal rules} (generated by \i\c{\\rule}; see
+\k{input-rule}). It can be one character, or more than one. The
+string you specify will be repeated to reach the required width, so
+you can specify something like \q{\cw{-=}} to get a rule that looks
+like \cw{-=-=-=}.
+
+\lcont{
+
+Like \cw{\\cfg\{text-bullet\}}, you can specify multiple fallback
+options in this command.
+
+}
+
+\dt \I{\cw{\\cfg\{text-quotes\}}}\cw{\\cfg\{text-quotes\}\{}\e{open-quote}\cw{\}\{}\e{close-quote}\cw{\}}[\cw{\{}\e{open-quote}\cw{\}\{}\e{close-quote}...\cw{\}}]
+
+\dd This specifies a set of quote characters for the text backend,
+overriding any defined by \cw{\\cfg\{quotes\}}. It has the same syntax
+(see \k{input-config}).
+
+\lcont{
+
+In this backend, these quotes will also be used to mark text enclosed
+in the \c{\\c} command (see \k{input-code}).
+
+}
+
+\dt \I{\cw{\\cfg\{text-emphasis\}}}\cw{\\cfg\{text-emphasis\}\{}\e{start-emph}\cw{\}\{}\e{end-emph}\cw{\}}[\cw{\{}\e{start-emph}\cw{\}\{}\e{end-emph}...\cw{\}}]
+
+\dd This specifies the characters which should be used to surround
+emphasised text (written using the \c{\\e} command; see
+\k{input-emph}).
+
+\lcont{
+
+You should separately specify the start-emphasis and end-emphasis
+text, each of which can be more than one character if you want.
+Also, like \cw{\\cfg\{text-quotes\}}, you can specify multiple pairs
+of fallback options in this command, and Halibut will always use a
+matching pair.
+
+}
+
\S{output-text-misc} Miscellaneous configuration options
+\dt \I\cw{\\cfg\{text-charset\}}\cw{\\cfg\{text-charset\}\{}\e{character set name}\cw{\}}
+
+\dd This tells Halibut what \i{character set} the output should be
+in. Any Unicode characters representable in this set will be output
+verbatim; any other characters will not be output and their
+\i{fallback text} (if any) will be used instead.
+
+\lcont{
+
+The character set names are the same as for
+\cw{\\cfg\{input-charset\}} (see \k{input-config}). However, unlike
+\cw{\\cfg\{input-charset\}}, this directive affects the \e{entire}
+output; it's not possible to switch encodings halfway through.
+
+}
+
+\dt \I{\cw{\\cfg\{text-list-suffix\}}}\cw{\\cfg\{text-list-suffix\}\{}\e{text}\cw{\}}
+
+\dd This text is appended to the number on a \i{numbered list} item
+(see \k{input-list-number}). So if you want to label your lists as
+\q{1)}, \q{2)} and so on, then you would write
+\cw{\\cfg\{text-list-suffix\}\{)\}}.
+
\dt \I{\cw{\\cfg\{text-versionid\}}}\cw{\\cfg\{text-versionid\}\{}\e{boolean}\cw{\}}
\dd If this is set to \c{true}, \i{version ID paragraphs} (defined
included at the bottom of the text file. If it is set to \c{false},
they will be omitted completely.
-\dt \I{\cw{\\cfg\{text-bullet\}}}\cw{\\cfg\{text-bullet\}\{}\e{text}\cw{\}}
-
-\dd This specifies the text which should be used as the \i{bullet}
-in bulletted lists. It can be one character
-(\cw{\\cfg\{text-bullet\}\{-\}}), or more than one
-(\cw{\\cfg\{text-bullet\}\{(*)\}}).
-
\# FIXME: code indentation is configurable, therefore \quote
\# indentation probably ought to be as well.
\c \cfg{text-indent-preamble}{false}
\c
\c \cfg{text-title-align}{centre}
-\c \cfg{text-title-underline}{=}
+\c \cfg{text-title-underline}{\u2550}{=}
\c
\c \cfg{text-chapter-align}{left}
-\c \cfg{text-chapter-underline}{-}
+\c \cfg{text-chapter-underline}{\u203e}{-}
\c \cfg{text-chapter-numeric}{false}
\c \cfg{text-chapter-suffix}{: }
\c
\c
\c ... and so on for all section levels below this ...
\e iiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiii
+\c
+\c \cfg{text-bullet}{\u2022}{-}
+\c \cfg{text-rule}{\u2500}{-}
+\c \cfg{text-quotes}{\u2018}{\u2019}{`}{'}
+\c \cfg{text-emphasis}{_}{_}
+\c
+\c \cfg{text-charset}{ASCII}
+\c \cfg{text-list-suffix}{.}
+\c \cfg{text-versionid}{true}
\H{output-html} HTML
\dd Sets the \i{output file name} in which to store the top-level
contents page. Since this is the first page a user ought to see when
beginning to read the document, a good choice in many cases might be
-\c{index.html} (but this is not the default, for historical
+\c{index.html} (although this is not the default, for historical
reasons).
\dt \I{\cw{\\cfg\{xhtml-index-filename\}}}\cw{\\cfg\{xhtml-index-filename\}\{}\e{filename}\cw{\}}
The formatting commands used in this template are:
-\dt \i\c{%N}
+\dt \I{%N-upper}\c{%N}
\dd Expands to the visible title of the section, with white space
removed. So in a chapter declared as \q{\cw{\\C\{fish\} Catching
this to \q{\cw{:\_}}, then the chapter title might look something
like \q{Chapter 2: Doing Things}.
-\dt \I{\cw{\\cfg\{xhtml-section-numeric\}}}\cw{\\cfg\{xhtml-section-numeric\}\{}\e{boolean}\cw{\}}
+\dt \I{\cw{\\cfg\{xhtml-section-numeric\}}}\cw{\\cfg\{xhtml-section-numeric\}\{}\e{level}\cw{\}\{}\e{boolean}\cw{\}}
\dd Specifies whether section headings at a particular level should
contain the word \q{Section} or equivalent (if \c{false}), or should
first-level headings (\c{\\H}), 1 means second-level headings
(\c{\\S}), 2 means the level below that (\c{\\S2}), and so on.
-\dt \I{\cw{\\cfg\{xhtml-section-suffix\}}}\cw{\\cfg\{xhtml-section-suffix\}\{}\e{text}\cw{\}}
+\dt \I{\cw{\\cfg\{xhtml-section-suffix\}}}\cw{\\cfg\{xhtml-section-suffix\}\{}\e{level}\cw{\}\{}\e{text}\cw{\}}
\dd Specifies the suffix text to be appended to section numbers at a
particular level, before displaying the section title.
\dd This directive lets you specify a \i{template}, with exactly the
same syntax used in \cw{\\cfg\{xhtml-template-filename\}} (see
-\k{output-html-file}), to be used for the anchor names (\i\cw{A
-NAME="..."}) used to allow URLs to refer to specific sections within
-a particular HTML file. So if you set this to \q{\cw{%k}}, for
-example, then each individual section in your document will be
+\k{output-html-file}), to be used for the anchor names (\i\cw{<A
+NAME="...">}) used to allow URLs to refer to specific sections
+within a particular HTML file. So if you set this to \q{\cw{%k}},
+for example, then each individual section in your document will be
addressable by means of a URL ending in a \c{#} followed by your
internal section keyword.
Help} program \cw{WINHELP.EXE}. There are two actual files
generated, one ending in \c{.hlp} and the other ending in \c{.cnt}.
+The output is in the \q{\i{Win1252}} character set.
+
The Windows Help output format supports the following configuration
directives:
}
+\dt \I{\cw{\\cfg\{winhelp-contents-titlepage\}}}\cw{\\cfg\{winhelp-contents-titlepage\}\{}\e{title}\cw{\}}
+
+\dd Sets the text used to describe the help page containing the blurb
+(see \k{input-blurb}) and table of contents.
+
+\dt
+\I{\cw{\\cfg\{winhelp-section-suffix\}}}\cw{\\cfg\{winhelp-section-suffix\}\{}\e{text}\cw{\}}
+
+\dd Specifies the \I{suffix text, in section titles}suffix text to
+be appended to section numbers, before displaying the section title.
+(Applies to all levels.)
+
+\dt \I{\cw{\\cfg\{winhelp-list-suffix\}}}\cw{\\cfg\{winhelp-list-suffix\}\{}\e{text}\cw{\}}
+
+\dd This text is appended to the number on a \i{numbered list} item,
+in exactly the same way as \cw{\\cfg\{text-list-suffix\}} (see
+\k{output-text-misc}).
+
+\dt \I{\cw{\\cfg\{winhelp-bullet\}}}\cw{\\cfg\{winhelp-bullet\}\{}\e{text}\cw{\}}[\cw{\{}\e{text}\cw{\}}...]
+
+\dd Specifies the text to use as the \i{bullet} in bulletted lists.
+You can specify multiple fallback options. Works exactly like the
+\cw{\\cfg\{text-bullet\}} directive (see
+\k{output-text-characters}).
+
+\dt \I{\cw{\\cfg\{winhelp-quotes\}}}\cw{\\cfg\{winhelp-quotes\}\{}\e{open-quote}\cw{\}\{}\e{close-quote}\cw{\}}[\cw{\{}\e{open-quote}\cw{\}\{}\e{close-quote}...\cw{\}}]
+
+\dd Specifies the quotation marks to use, overriding any
+\cw{\\cfg\{quotes\}} directive. You can specify multiple
+fallback options. Works exactly like the \cw{\\cfg\{text-quotes\}}
+directive (see \k{output-text-characters}).
+
\dt \I{\cw{\\cfg\{winhelp-topic\}}}\cw{\\cfg\{winhelp-topic\}\{}\e{topic-name}\cw{\}}
\dd This directive defines a Windows \i{Help topic} name in the current
The \i{default settings} for the Windows Help output format are:
\c \cfg{winhelp-filename}{output.hlp}
+\c \cfg{winhelp-contents-titlepage}{Title page}
+\c \cfg{winhelp-section-suffix}{: }
+\c \cfg{winhelp-list-suffix}{.}
+\c \cfg{winhelp-bullet}{\u2022}{-}
+\c \cfg{winhelp-quotes}{\u2018}{\u2019}{"}{"}
and no \c{\\cfg\{winhelp-topic\}} directives anywhere.
For example, a typical \cw{man} page might contain
-\c \cfg{man-identity}{make-foo}{1}{June 2003}{foo-utils}{Fred Bloggs}
+\c \cfg{man-identity}{make-foo}{1}{June 2003}{foo-utils}{Fred
+\c Bloggs}
}
Then you have a file \c{make-foo.but}, and probably others like it
as well, each of which looks something like this:
-\c \cfg{man-identity}{make-foo}{1}{June 2003}{foo-utils}{Fred Bloggs}
+\c \cfg{man-identity}{make-foo}{1}{June 2003}{foo-utils}{Fred
+\c Bloggs}
\c
\c \H{man-foo} \cw{man} page for \c{make-foo}
\c
}
+\dt \I{\cw{\\cfg\{man-charset\}}}\cw{\\cfg\{man-charset\}\{}\e{character set}\cw{\}}
+
+\dd Specifies what character set the output should be in, similarly to
+\cw{\\cfg\{text-charset\}} (see \k{output-text-misc}).
+
+\# FIXME: you're probably on your own in making sure that it's
+sensible to output man pages in that charset.
+
+\dt \I{\cw{\\cfg\{man-bullet\}}}\cw{\\cfg\{man-bullet\}\{}\e{text}\cw{\}}[\cw{\{}\e{text}\cw{\}}...]
+
+\dd Specifies the text to use as the \i{bullet} in bulletted lists.
+You can specify multiple fallback options. Works exactly like the
+\cw{\\cfg\{text-bullet\}} directive (see \k{output-text-characters}).
+
+\dt \I{\cw{\\cfg\{man-quotes\}}}\cw{\\cfg\{man-quotes\}\{}\e{open-quote}\cw{\}\{}\e{close-quote}\cw{\}}[\cw{\{}\e{open-quote}\cw{\}\{}\e{close-quote}...\cw{\}}]
+
+\dd Specifies the quotation marks to use, overriding any
+\cw{\\cfg\{quotes\}} directive. You can specify multiple
+fallback options. Works exactly like the \cw{\\cfg\{text-quotes\}}
+directive (see \k{output-text-characters}).
+
The \i{default settings} for the \cw{man} page output format are:
\c \cfg{man-filename}{output.1}
\c \cfg{man-identity}{}
\c \cfg{man-headnumbers}{false}
\c \cfg{man-mindepth}{0}
+\c \cfg{man-charset}{ASCII}
+\c \cfg{man-bullet}{\u2022}{o}
+\c \cfg{man-quotes}{\u2018}{\u2019}{"}{"}
+
+\H{output-info} GNU \c{info}
+
+This output format generates files which can be used with the \i{GNU
+\c{info}} program.
+
+There are typically multiple output files: a primary file whose name
+usually ends in \c{.info}, and one or more subsidiary files whose
+names have numbers on the end, so that they end in \c{.info-1},
+\c{.info-2} and so on. Alternatively, this output format can be
+configured to output a single large file containing the whole
+document.
+
+The \c{info} output format supports the following configuration
+directives:
+
+\dt \I{\cw{\\cfg\{info-filename\}}}\cw{\\cfg\{info-filename\}\{}\e{filename}\cw{\}}
+
+\dd Sets the output file name in which to store the \c{info} file.
+This directive is implicitly generated if you provide a file name
+parameter after the command-line option \i\c{--info} (see
+\k{running-options}).
+
+\lcont{
+
+The suffixes \c{-1}, \c{-2}, \c{-3} and so on will be appended to
+your output file name to produce any subsidiary files required.
+
+Note that \c{info} files refer to their own names internally, so
+these files cannot be \I{renaming \c{info} files}renamed after
+creation and remain useful.
+
+}
+
+\dt \I{\cw{\\cfg\{info-width\}}}\cw{\\cfg\{info-width\}\{}\e{width}\cw{\}}
+
+\dd Sets the \I{text width}width of the main part of the document,
+in characters. Works exactly like the \cw{\\cfg\{text-width\}}
+directive (see \k{output-text-dimensions}).
+
+\dt \I{\cw{\\cfg\{info-indent-code\}}}\cw{\\cfg\{info-indent-code\}\{}\e{indent}\cw{\}}
+
+\dd Specifies the extra indentation for \I{code paragraphs,
+indentation} code paragraphs. Works exactly like the
+\cw{\\cfg\{text-indent-code\}} directive (see
+\k{output-text-dimensions}).
+
+\dt \I{\cw{\\cfg\{info-index-width\}}}\cw{\\cfg\{info-index-width\}\{}\e{width}\cw{\}}
+
+\dd Specifies how much horizontal space to leave in the index node
+for the text of \i{index terms}, before displaying the sections the
+terms occur in.
+
+\dt \I{\cw{\\cfg\{info-list-indent\}}}\cw{\\cfg\{info-list-indent\}\{}\e{indent}\cw{\}}
+
+\dd Specifies the extra indentation before the bullet or number in a
+\I{bulletted list, indentation}\I{numbered list, indentation}list
+item. Works exactly like the \cw{\\cfg\{text-list-indent\}}
+directive (see \k{output-text-dimensions}).
+
+\dt \I{\cw{\\cfg\{info-listitem-indent\}}}\cw{\\cfg\{info-listitem-indent\}\{}\e{indent}\cw{\}}
+
+\dd Specifies the additional indentation before the body of a list
+item. Works exactly like the \cw{\\cfg\{text-listitem-indent\}}
+directive (see \k{output-text-dimensions}).
+
+\dt \I{\cw{\\cfg\{info-charset\}}}\cw{\\cfg\{info-charset\}\{}\e{character set}\cw{\}}
+
+\dd Specifies what character set the output should be in, similarly to
+\cw{\\cfg\{text-charset\}} (see \k{output-text-misc}).
+
+\# FIXME: if you try sufficiently hard, you can probably find an
+output encoding that will break the info format by trampling on its
+special characters. So either don't do that, or tell us what we should
+do about it.
+
+\dt \I{\cw{\\cfg\{info-section-suffix\}}}\cw{\\cfg\{info-section-suffix\}\{}\e{text}\cw{\}}
+
+\dd Specifies the suffix text to be appended to each section number
+before displaying the section title. For example, if you set this to
+\q{\cw{:\_}}, then a typical section title might look something like
+\q{Section 3.1: Something Like This}.
+
+\dt \I{\cw{\\cfg\{info-underline\}}}\cw{\\cfg\{info-underline\}\{}\e{text}\cw{\}}[\cw{\{}\e{text}\cw{\}}...]
+
+\dd Specifies the text to be used to underline section titles. Works
+very much like the \cw{\\cfg\{text-chapter-underline\}} directive
+(see \k{output-text-headings}). You can specify more than one
+option, and Halibut will choose the first one supported by the
+character set.
+
+\dt \I{\cw{\\cfg\{info-bullet\}}}\cw{\\cfg\{info-bullet\}\{}\e{text}\cw{\}}[\cw{\{}\e{text}\cw{\}}...]
+
+\dd Specifies the text to use as the \i{bullet} in bulletted lists.
+You can specify multiple fallback options. Works exactly like the
+\cw{\\cfg\{text-bullet\}} directive (see
+\k{output-text-characters}).
+
+\dt \I{\cw{\\cfg\{info-rule\}}}\cw{\\cfg\{info-rule\}\{}\e{text}\cw{\}}[\cw{\{}\e{text}\cw{\}}...]
+
+\dd Specifies the text used to draw \i{horizontal rules}. You can
+specify multiple fallback options. Works exactly like the
+\cw{\\cfg\{text-rule\}} directive (see \k{output-text-characters}).
+
+\dt \I{\cw{\\cfg\{info-quotes\}}}\cw{\\cfg\{info-quotes\}\{}\e{open-quote}\cw{\}\{}\e{close-quote}\cw{\}}[\cw{\{}\e{open-quote}\cw{\}\{}\e{close-quote}...\cw{\}}]
+
+\dd Specifies the quotation marks to use, overriding any
+\cw{\\cfg\{quotes\}} directive. You can specify multiple
+fallback options. Works exactly like the \cw{\\cfg\{text-quotes\}}
+directive (see \k{output-text-characters}).
+
+\dt \I{\cw{\\cfg\{info-emphasis\}}}\cw{\\cfg\{info-emphasis\}\{}\e{start-emph}\cw{\}\{}\e{end-emph}\cw{\}}[\cw{\{}\e{start-emph}\cw{\}\{}\e{end-emph}...\cw{\}}]
+
+\dd Specifies how to display emphasised text. You can specify
+multiple fallback options. Works exactly like the
+\cw{\\cfg\{text-emphasis\}} directive (see
+\k{output-text-characters}).
+
+\dt \I{\cw{\\cfg\{info-list-suffix\}}}\cw{\\cfg\{info-list-suffix\}\{}\e{text}\cw{\}}
+
+\dd Specifies the text to append to the item numbers in a
+\i{numbered list}. Works exactly like the
+\cw{\\cfg\{text-list-suffix\}} directive (see
+\k{output-text-misc}).
+
+\dt \I{\cw{\\cfg\{info-max-file-size\}}}\cw{\\cfg\{info-max-file-size\}\{}\e{bytes}\cw{\}}
+
+\dd Sets the preferred \i{maximum file size} for each subsidiary
+file. As a special case, if you set this to zero, there will be no
+subsidiary files and the whole document will be placed in a single
+self-contained output file. (However, note that this file can still
+not be renamed usefully.)
+
+\lcont{
+
+The preferred maximum file size is only a guideline. Halibut may be
+forced to exceed it if a single section of the document is larger
+than the maximum size (since individual \c{info} nodes may not be
+split between files).
+
+}
+
+\dt \I{\cw{\\cfg\{info-dir-entry\}}}\cw{\\cfg\{info-dir-entry\}\{}\e{section}\cw{\}\{}\e{short
+name}\cw{\}\{}\e{long name}\cw{\}}[\cw{\{}\e{keyword}\cw{\}}]
+
+\dd Constructs an \i\cw{INFO-DIR-ENTRY} section and places it in the
+header of the Info file. This mechanism is used to automatically
+generate the \i{\c{dir} file} at the root of a Unix system's
+\c{info} collection.
+
+\lcont{
+
+The parameters to this directive are:
+
+\dt \e{section}
+
+\dd Specifies the section of the \c{dir} file in which you want your
+document referenced. For example, \q{Development}, or \q{Games}, or
+\q{Miscellaneous}.
+
+\dt \e{short name}
+
+\dd Specifies a short name for the directory entry, which will
+appear at the start of the menu line.
+
+\dt \e{long name}
+
+\dd Specifies a long name for the directory entry, which will appear
+at the end of the menu line.
+
+\dt \e{keyword}
+
+\dd This parameter is optional. If it is present, then the directory
+entry will cause a jump to a particular subsection of your document,
+rather than starting at the top. The subsection will be the one
+referred to by the given keyword (see \k{input-sections} for details
+about assigning keywords to document sections).
+
+For example, in a document describing many game programs, the
+configuration directive
+
+\c \cfg{info-dir-entry}{Games}{Chess}{Electronic chess
+\c game}{chess}
+
+might produce text in the \c{dir} file looking something like this:
+
+\c Games
+\c * Chess: (mygames)Chapter 3. Electronic chess game
+
+if the output file were called \c{mygames.info} and the keyword
+\c{chess} had been used to define Chapter 3 of the document.
+
+}
+
+The \i{default settings} for the \c{info} output format are:
+
+\c \cfg{info-filename}{output.info}
+\c
+\c \cfg{info-width}{70}
+\c \cfg{info-indent-code}{2}
+\c \cfg{info-index-width}{40}
+\c \cfg{info-list-indent}{1}
+\c \cfg{info-listitem-indent}{3}
+\c
+\c \cfg{info-charset}{ASCII}
+\c
+\c \cfg{info-section-suffix}{: }
+\c
+\c \cfg{info-underline}{\u203e}{-}
+\c \cfg{info-bullet}{\u2022}{-}
+\c \cfg{info-rule}{\u2500}{-}
+\c \cfg{info-quotes}{\u2018}{\u2019}{`}{'}
+\c \cfg{info-emphasis}{_}{_}
+\c
+\c \cfg{info-list-suffix}{.}
+\c \cfg{info-max-file-size}{65536}
+
+and no \cw{\\cfg\{info-dir-entry\}} directives.
+
+\H{output-ps} \i{PostScript}
+
+This output format generates a printable manual in PostScript format.
+
+This format is currently very new and is not yet configurable. There
+is only one available configuration option:
+
+\dt \I{\cw{\\cfg\{ps-filename\}}}\cw{\\cfg\{ps-filename\}\{}\e{filename}\cw{\}}
+
+\dd Sets the \i{output file name} in which to store the PostScript
+file. This directive is implicitly generated if you provide a file
+name parameter after the command-line option \i\c{--ps} (see
+\k{running-options}).
+
+The \i{default settings} for the PostScript output format are:
+
+\c \cfg{ps-filename}{output.ps}
+
+\H{output-pdf} \i{PDF}
+
+This output format generates a printable manual in PDF format. This
+should look exactly identical to the PostScript output (see
+\k{output-ps}), but also uses some PDF interactive features to
+provide an outline of all the document's sections and clickable
+cross-references between sections.
+
+This format is currently very new and is not yet configurable. There
+is only one available configuration option:
+
+\dt \I{\cw{\\cfg\{pdf-filename\}}}\cw{\\cfg\{pdf-filename\}\{}\e{filename}\cw{\}}
+
+\dd Sets the \i{output file name} in which to store the PDF file.
+This directive is implicitly generated if you provide a file name
+parameter after the command-line option \i\c{--pdf} (see
+\k{running-options}).
+
+The \i{default settings} for the PDF output format are:
+
+\c \cfg{pdf-filename}{output.pdf}
~mdw / sgt / halibut / blobdiff