16ea3abe |
1 | \C{output} Halibut output formats |
2 | |
339cbe09 |
3 | This chapter describes each of Halibut's current \i{output formats}. |
4 | It gives some general information about the format, and also |
5 | describes all the \i{configuration directives} which are specific to |
6 | that format. |
16ea3abe |
7 | |
8 | \H{output-text} Plain text |
9 | |
339cbe09 |
10 | This output format generates the document as a single \i{plain text} |
9ec43d08 |
11 | file. No table of contents or index is generated. |
16ea3abe |
12 | |
16ea3abe |
13 | The precise formatting of the text file can be controlled by a |
14 | variety of configuration directives. They are listed in the |
15 | following subsections. |
16 | |
0a6347b4 |
17 | \S{output-text-file} Output file name |
18 | |
19 | \dt \I{\cw{\\cfg\{text-filename\}}}\cw{\\cfg\{text-filename\}\{}\e{filename}\cw{\}} |
20 | |
21 | \dd Sets the \i{output file name} in which to store the text file. |
22 | This directive is implicitly generated if you provide a file name |
23 | parameter after the command-line option \i\c{--text} (see |
24 | \k{running-options}). |
25 | |
16ea3abe |
26 | \S{output-text-dimensions} Indentation and line width |
27 | |
28 | This section describes the configuration directives which control |
339cbe09 |
29 | the \i{horizontal dimensions} of the output text file: how much |
16ea3abe |
30 | paragraphs are indented by and how long the lines are. |
31 | |
339cbe09 |
32 | \dt \I{\cw{\\cfg\{text-width\}}}\cw{\\cfg\{text-width\}\{}\e{width}\cw{\}} |
16ea3abe |
33 | |
339cbe09 |
34 | \dd Sets the \I{text width}width of the main part of the document, |
35 | in characters. This width will be used for wrapping paragraphs and |
36 | for centring titles (if you have asked for titles to be centred - |
37 | see \k{output-text-headings}). This width does \e{not} include the |
38 | left indentation set by \cw{\\cfg\{text-indent\}}; if you specify an |
16ea3abe |
39 | indent of 8 and a width of 64, your maximum output line length will |
40 | be 72. |
41 | |
339cbe09 |
42 | \dt \I{\cw{\\cfg\{text-indent\}}}\cw{\\cfg\{text-indent\}\{}\e{indent}\cw{\}} |
16ea3abe |
43 | |
339cbe09 |
44 | \dd Sets the left \i{indentation} for the document. If you set this |
45 | to zero, your document will look like an ordinary text file as |
46 | someone with a text editor might have written it; if you set it |
47 | above zero, the text file will have a \i{margin} down the left in |
48 | the style of some printed manuals, and you can then configure the |
49 | section numbers to appear in this margin (see |
50 | \k{output-text-headings}). |
16ea3abe |
51 | |
339cbe09 |
52 | \dt \I{\cw{\\cfg\{text-indent-code\}}}\cw{\\cfg\{text-indent-code\}\{}\e{indent}\cw{\}} |
16ea3abe |
53 | |
54 | \dd Specifies how many extra characters of indentation (on top of |
339cbe09 |
55 | the normal left indent) should be given to \I{code paragraphs, |
56 | indentation} code paragraphs. |
16ea3abe |
57 | |
339cbe09 |
58 | \dt \I{\cw{\\cfg\{text-list-indent\}}}\cw{\\cfg\{text-list-indent\}\{}\e{indent}\cw{\}} |
16ea3abe |
59 | |
60 | \dd Specifies how many extra spaces should be used to indent the |
339cbe09 |
61 | bullet or number in a \I{bulletted list, indentation}bulletted or |
62 | \I{numbered list, indentation}numbered \I{list, indentation}list. |
63 | The actual body of the list item will be indented by this much |
64 | \e{plus} the value configured by \cw{\\cfg\{text-listitem-indent\}}. |
16ea3abe |
65 | |
339cbe09 |
66 | \dt \I{\cw{\\cfg\{text-listitem-indent\}}}\cw{\\cfg\{text-listitem-indent\}\{}\e{indent}\cw{\}} |
16ea3abe |
67 | |
68 | \dd Specifies how many extra spaces should be used to indent the |
69 | body of a list item, over and above the number configured in |
70 | \cw{\\cfg\{text-list-indent\}}. |
71 | |
339cbe09 |
72 | \dt \I{\cw{\\cfg\{text-indent-preamble\}}}\cw{\\cfg\{text-indent-preamble\}\{}\e{boolean}\cw{\}} |
16ea3abe |
73 | |
339cbe09 |
74 | \dd When this is set to \c{true}, the document \i{preamble} (i.e. any |
16ea3abe |
75 | paragraphs appearing before the first chapter heading) will be |
76 | indented to the level specified by \cw{\\cfg\{text-indent\}}. If |
77 | this setting is \c{false}, the document preamble will not be |
78 | indented at all from the left margin. |
79 | |
339cbe09 |
80 | \S{output-text-headings} \ii{Configuring heading display} |
16ea3abe |
81 | |
82 | The directives in this section allow you to configure the appearance |
83 | of the title, chapter and section headings in your text file. |
84 | |
339cbe09 |
85 | Several of the directives listed below specify the \i{alignment} of |
86 | a heading. These alignment options have three possible values: |
16ea3abe |
87 | |
339cbe09 |
88 | \dt \i\c{left} |
16ea3abe |
89 | |
90 | \dd Align the heading to the very left of the text file (column zero). |
91 | |
339cbe09 |
92 | \dt \i\c{leftplus} |
16ea3abe |
93 | |
94 | \dd Align the section title to the left of the main display region |
95 | (in other words, indented to the level specified by |
96 | \cw{\\cfg\{text-indent\}}). The section \e{number} is placed to the |
97 | left of that (so that it goes in the margin if there is room). |
98 | |
339cbe09 |
99 | \dt \i\c{centre} |
16ea3abe |
100 | |
101 | \dd Centre the heading. |
102 | |
103 | Also, several of the directives below specify how a title should be |
339cbe09 |
104 | \I{underlining}underlined. The parameter to one of these directives |
db662ca1 |
105 | should be either blank (\cw{\{\}}) or a piece of text which will be |
106 | repeated to produce the underline. So you might want to specify, for |
107 | example, \cw{\\text-title-underline\{=\}} but |
108 | \cw{\\text-chapter-underline\{\-\}}. |
109 | |
110 | You can also specify more than one underline setting, and Halibut |
111 | will choose the first one that the output character set supports. |
112 | So, for example, you could write |
65f95f6c |
113 | \cw{\\text-chapter-underline\{\\u203e\}\{\-\}}, and Halibut would use |
db662ca1 |
114 | the Unicode \q{OVERLINE} character where possible and fall back to |
115 | the ASCII minus sign otherwise. |
16ea3abe |
116 | |
339cbe09 |
117 | \dt \I{\cw{\\cfg\{text-title-align\}}}\cw{\\cfg\{text-title-align\}\{}\e{alignment}\cw{\}} |
16ea3abe |
118 | |
119 | \dd Specifies the alignment of the overall document title: \c{left}, |
120 | \c{leftplus} or \c{centre}. |
121 | |
bdc961c7 |
122 | \dt \I{\cw{\\cfg\{text-title-underline\}}}\cw{\\cfg\{text-title-underline\}\{}\e{underline-text}\cw{\}} |
16ea3abe |
123 | |
124 | \dd Specifies how the overall document title should be underlined. |
125 | |
339cbe09 |
126 | \dt \I{\cw{\\cfg\{text-chapter-align\}}}\cw{\\cfg\{text-chapter-align\}\{}\e{alignment}\cw{\}} |
16ea3abe |
127 | |
128 | \dd Specifies the alignment of chapter and appendix headings. |
129 | |
bdc961c7 |
130 | \dt \I{\cw{\\cfg\{text-chapter-underline\}}}\cw{\\cfg\{text-chapter-underline\}\{}\e{underline-text}\cw{\}} |
16ea3abe |
131 | |
132 | \dd Specifies how chapter and appendix headings should be underlined. |
133 | |
339cbe09 |
134 | \dt \I{\cw{\\cfg\{text-chapter-numeric\}}}\cw{\\cfg\{text-chapter-numeric\}\{}\e{boolean}\cw{\}} |
16ea3abe |
135 | |
136 | \dd If this is set to \c{true}, then chapter headings will not |
137 | contain the word \q{Chapter} (or whatever other word you have |
138 | defined in its place - see \k{input-sections} and \k{input-config}); |
139 | they will just contain the chapter \e{number}, followed by the |
140 | chapter title. If you set this to \c{false}, chapter headings will |
141 | be prefixed by \q{Chapter} or equivalent. |
142 | |
339cbe09 |
143 | \dt \I{\cw{\\cfg\{text-chapter-suffix\}}}\cw{\\cfg\{text-chapter-suffix\}\{}\e{text}\cw{\}} |
16ea3abe |
144 | |
145 | \dd This specifies the suffix text to be appended to the chapter |
146 | number, before displaying the chapter title. For example, if you set |
b7747050 |
147 | this to \cq{:\_}, then the chapter title might look something |
16ea3abe |
148 | like \q{Chapter 2: Doing Things}. |
149 | |
339cbe09 |
150 | \dt \I{\cw{\\cfg\{text-section-align\}}}\cw{\\cfg\{text-section-align\}\{}\e{level}\cw{\}\{}\e{alignment}\cw{\}} |
16ea3abe |
151 | |
152 | \dd Specifies the alignment of section headings at a particular |
153 | level. The \e{level} parameter specifies which level of section |
154 | headings you want to affect: 0 means first-level headings (\c{\\H}), |
155 | 1 means second-level headings (\c{\\S}), 2 means the level below |
156 | that (\c{\\S2}), and so on. The \e{alignment} parameter is treated |
157 | just like the other alignment directives listed above. |
158 | |
bdc961c7 |
159 | \dt \I{\cw{\\cfg\{text-section-underline\}}}\cw{\\cfg\{text-section-underline\}\{}\e{level}\cw{\}\{}\e{underline-text}\cw{\}} |
16ea3abe |
160 | |
161 | \dd Specifies how to underline section headings at a particular level. |
162 | |
339cbe09 |
163 | \dt \I{\cw{\\cfg\{text-section-numeric\}}}\cw{\\cfg\{text-section-numeric\}\{}\e{level}\cw{\}\{}\e{boolean}\cw{\}} |
16ea3abe |
164 | |
165 | \dd Specifies whether section headings at a particular level should |
166 | contain the word \q{Section} or equivalent (if \c{false}), or should |
167 | be numeric only (if \c{true}). |
168 | |
339cbe09 |
169 | \dt \I{\cw{\\cfg\{text-section-suffix\}}}\cw{\\cfg\{text-section-suffix\}\{}\e{level}\cw{\}\{}\e{text}\cw{\}} |
16ea3abe |
170 | |
339cbe09 |
171 | \dd Specifies the \I{suffix text, in section titles}suffix text to |
172 | be appended to section numbers at a particular level, before |
173 | displaying the section title. |
16ea3abe |
174 | |
db662ca1 |
175 | \S{output-text-characters} Configuring the characters used |
176 | |
6b4dfd74 |
177 | \dt \I\cw{\\cfg\{text-charset\}}\cw{\\cfg\{text-charset\}\{}\e{character set name}\cw{\}} |
178 | |
179 | \dd This tells Halibut what \i{character set} the output should be |
180 | in. Any Unicode characters representable in this set will be output |
181 | verbatim; any other characters will not be output and their |
182 | \i{fallback text} (if any) will be used instead. |
183 | |
184 | \lcont{ |
185 | |
186 | The character set names are the same as for |
187 | \cw{\\cfg\{input-charset\}} (see \k{input-config}). However, unlike |
188 | \cw{\\cfg\{input-charset\}}, this directive affects the \e{entire} |
189 | output; it's not possible to switch encodings halfway through. |
190 | |
191 | } |
192 | |
db662ca1 |
193 | \dt \I{\cw{\\cfg\{text-bullet\}}}\cw{\\cfg\{text-bullet\}\{}\e{text}\cw{\}}[\cw{\{}\e{text}...\cw{\}}] |
194 | |
195 | \dd This specifies the text which should be used as the \i{bullet} |
196 | in bulletted lists. It can be one character |
197 | (\cw{\\cfg\{text-bullet\}\{-\}}), or more than one |
198 | (\cw{\\cfg\{text-bullet\}\{(*)\}}). |
199 | |
200 | \lcont{ |
201 | |
6069815a |
202 | Like \cw{\\cfg\{quotes\}} (see \k{input-config}), you can specify multiple |
203 | possible options after this command, and Halibut will choose the first one |
204 | which the output character set supports. For example, you might write |
db662ca1 |
205 | \cw{\\cfg\{text-bullet\}\{\\u2022\}\{\\u00b7\}\{*\}}, in which case |
206 | Halibut would use the Unicode \q{BULLET} character where possible, |
207 | fall back to the ISO-8859-1 \q{MIDDLE DOT} if that wasn't available, |
208 | and resort to the ASCII asterisk if all else failed. |
209 | |
210 | } |
211 | |
212 | \dt \I{\cw{\\cfg\{text-rule\}}}\cw{\\cfg\{text-rule\}\{}\e{text}\cw{\}}[\cw{\{}\e{text}...\cw{\}}] |
213 | |
214 | \dd This specifies the text which should be used for drawing |
215 | \i{horizontal rules} (generated by \i\c{\\rule}; see |
216 | \k{input-rule}). It can be one character, or more than one. The |
217 | string you specify will be repeated to reach the required width, so |
b7747050 |
218 | you can specify something like \cq{-=} to get a rule that looks |
db662ca1 |
219 | like \cw{-=-=-=}. |
220 | |
221 | \lcont{ |
222 | |
223 | Like \cw{\\cfg\{text-bullet\}}, you can specify multiple fallback |
224 | options in this command. |
225 | |
226 | } |
227 | |
228 | \dt \I{\cw{\\cfg\{text-quotes\}}}\cw{\\cfg\{text-quotes\}\{}\e{open-quote}\cw{\}\{}\e{close-quote}\cw{\}}[\cw{\{}\e{open-quote}\cw{\}\{}\e{close-quote}...\cw{\}}] |
229 | |
6069815a |
230 | \dd This specifies a set of quote characters for the text backend, |
231 | overriding any defined by \cw{\\cfg\{quotes\}}. It has the same syntax |
232 | (see \k{input-config}). |
db662ca1 |
233 | |
234 | \lcont{ |
235 | |
6069815a |
236 | In this backend, these quotes will also be used to mark text enclosed |
237 | in the \c{\\c} command (see \k{input-code}). |
db662ca1 |
238 | |
239 | } |
240 | |
241 | \dt \I{\cw{\\cfg\{text-emphasis\}}}\cw{\\cfg\{text-emphasis\}\{}\e{start-emph}\cw{\}\{}\e{end-emph}\cw{\}}[\cw{\{}\e{start-emph}\cw{\}\{}\e{end-emph}...\cw{\}}] |
242 | |
5b1d0032 |
243 | \dd This specifies the characters which should be used to surround |
db662ca1 |
244 | emphasised text (written using the \c{\\e} command; see |
245 | \k{input-emph}). |
246 | |
247 | \lcont{ |
248 | |
249 | You should separately specify the start-emphasis and end-emphasis |
250 | text, each of which can be more than one character if you want. |
251 | Also, like \cw{\\cfg\{text-quotes\}}, you can specify multiple pairs |
252 | of fallback options in this command, and Halibut will always use a |
253 | matching pair. |
254 | |
255 | } |
256 | |
16ea3abe |
257 | \S{output-text-misc} Miscellaneous configuration options |
258 | |
db662ca1 |
259 | \dt \I{\cw{\\cfg\{text-list-suffix\}}}\cw{\\cfg\{text-list-suffix\}\{}\e{text}\cw{\}} |
260 | |
261 | \dd This text is appended to the number on a \i{numbered list} item |
262 | (see \k{input-list-number}). So if you want to label your lists as |
263 | \q{1)}, \q{2)} and so on, then you would write |
264 | \cw{\\cfg\{text-list-suffix\}\{)\}}. |
265 | |
339cbe09 |
266 | \dt \I{\cw{\\cfg\{text-versionid\}}}\cw{\\cfg\{text-versionid\}\{}\e{boolean}\cw{\}} |
16ea3abe |
267 | |
339cbe09 |
268 | \dd If this is set to \c{true}, \i{version ID paragraphs} (defined |
269 | using the \i\c{\\versionid} command - see \k{input-blurb}) will be |
270 | included at the bottom of the text file. If it is set to \c{false}, |
271 | they will be omitted completely. |
16ea3abe |
272 | |
16ea3abe |
273 | \# FIXME: code indentation is configurable, therefore \quote |
274 | \# indentation probably ought to be as well. |
275 | |
276 | \# FIXME: text-indent-* should be consistently named. |
277 | |
278 | \S{output-text-defaults} Default settings |
279 | |
339cbe09 |
280 | The \i{default settings} for Halibut's plain text output format are: |
16ea3abe |
281 | |
0a6347b4 |
282 | \c \cfg{text-filename}{output.txt} |
283 | \c |
16ea3abe |
284 | \c \cfg{text-width}{68} |
285 | \c \cfg{text-indent}{7} |
286 | \c \cfg{text-indent-code}{2} |
287 | \c \cfg{text-list-indent}{1} |
288 | \c \cfg{text-listitem-indent}{3} |
289 | \c \cfg{text-indent-preamble}{false} |
290 | \c |
291 | \c \cfg{text-title-align}{centre} |
db662ca1 |
292 | \c \cfg{text-title-underline}{\u2550}{=} |
16ea3abe |
293 | \c |
294 | \c \cfg{text-chapter-align}{left} |
db662ca1 |
295 | \c \cfg{text-chapter-underline}{\u203e}{-} |
16ea3abe |
296 | \c \cfg{text-chapter-numeric}{false} |
297 | \c \cfg{text-chapter-suffix}{: } |
298 | \c |
299 | \c \cfg{text-section-align}{0}{leftplus} |
300 | \c \cfg{text-section-underline}{0}{} |
301 | \c \cfg{text-section-numeric}{0}{true} |
302 | \c \cfg{text-section-suffix}{0}{ } |
303 | \c |
304 | \c \cfg{text-section-align}{1}{leftplus} |
305 | \c \cfg{text-section-underline}{1}{} |
306 | \c \cfg{text-section-numeric}{1}{true} |
307 | \c \cfg{text-section-suffix}{1}{ } |
308 | \c |
309 | \c ... and so on for all section levels below this ... |
310 | \e iiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiii |
db662ca1 |
311 | \c |
6b4dfd74 |
312 | \c \cfg{text-charset}{ASCII} |
db662ca1 |
313 | \c \cfg{text-bullet}{\u2022}{-} |
314 | \c \cfg{text-rule}{\u2500}{-} |
315 | \c \cfg{text-quotes}{\u2018}{\u2019}{`}{'} |
316 | \c \cfg{text-emphasis}{_}{_} |
317 | \c |
318 | \c \cfg{text-list-suffix}{.} |
319 | \c \cfg{text-versionid}{true} |
16ea3abe |
320 | |
321 | \H{output-html} HTML |
322 | |
9ec43d08 |
323 | \# FIXME: this probably needs major revision due to the new HTML |
324 | backend |
325 | |
339cbe09 |
326 | This output format generates an \i{HTML} version of the document. By |
16ea3abe |
327 | default, this will be in multiple files, starting with |
328 | \c{Contents.html} and splitting the document into files by chapter |
329 | and/or subsection. You can configure precisely how the text is split |
330 | between HTML files using the configuration commands described in |
331 | this section. In particular, you can configure Halibut to output one |
0a6347b4 |
332 | single HTML file instead of multiple ones. |
16ea3abe |
333 | |
339cbe09 |
334 | Strictly speaking, the output format is \i{XHTML} 1.0 Transitional, |
16ea3abe |
335 | which is why all of the configuration directives start with the word |
336 | \c{xhtml} rather than \c{html}. |
337 | |
0a6347b4 |
338 | \S{output-html-file} Controlling the output file names |
339 | |
340 | \dt \I{\cw{\\cfg\{xhtml-contents-filename\}}}\cw{\\cfg\{xhtml-contents-filename\}\{}\e{filename}\cw{\}} |
341 | |
342 | \dd Sets the \i{output file name} in which to store the top-level |
343 | contents page. Since this is the first page a user ought to see when |
344 | beginning to read the document, a good choice in many cases might be |
fc8e7adb |
345 | \c{index.html} (although this is not the default, for historical |
0a6347b4 |
346 | reasons). |
347 | |
348 | \dt \I{\cw{\\cfg\{xhtml-index-filename\}}}\cw{\\cfg\{xhtml-index-filename\}\{}\e{filename}\cw{\}} |
349 | |
350 | \dd Sets the file name in which to store the document's index. |
351 | |
352 | \dt \I{\cw{\\cfg\{xhtml-template-filename\}}}\cw{\\cfg\{xhtml-template-filename\}\{}\e{template}\cw{\}} |
353 | |
354 | \dd Provides a \i{template} to be used when constructing the file |
355 | names of each chapter or section of the document. This template |
356 | should contain at least one \i\e{formatting command}, in the form of |
357 | a per cent sign followed by a letter. (If you need a literal per |
358 | cent sign, you can write \c{%%}.) |
359 | |
360 | \lcont{ |
361 | |
362 | The formatting commands used in this template are: |
363 | |
da090173 |
364 | \dt \I{%N-upper}\c{%N} |
0a6347b4 |
365 | |
366 | \dd Expands to the visible title of the section, with white space |
b7747050 |
367 | removed. So in a chapter declared as \cq{\\C\{fish\} Catching |
368 | Fish}, this formatting command would expand to |
369 | \cq{CatchingFish}. |
0a6347b4 |
370 | |
371 | \dt \i\c{%n} |
372 | |
373 | \dd Expands to the type and number of the section, without white |
b7747050 |
374 | space. So in chapter 1 this would expand to \cq{Chapter1}; in |
375 | section A.4.3 it would expand to \cq{SectionA.4.3}, and so on. |
0a6347b4 |
376 | If the section has no number (an unnumbered chapter created using |
377 | \c{\\U}), this directive falls back to doing the same thing as |
378 | \c{%N}. |
379 | |
380 | \dt \i\c{%b} |
381 | |
382 | \dd Expands to the bare number of the section. So in chapter 1 this |
b7747050 |
383 | would expand to \cq{1}; in section A.4.3 it would expand to |
384 | \cq{A.4.3}, and so on. If the section has no number (an |
0a6347b4 |
385 | unnumbered chapter created using \c{\\U}), this directive falls back |
386 | to doing the same thing as \c{%N}. |
387 | |
388 | \dt \i\c{%k} |
389 | |
390 | \dd Expands to the internal keyword specified in the section title. |
b7747050 |
391 | So in a chapter declared as \cq{\\C\{fish\} Catching Fish}, this |
392 | formatting command would expand to \cq{fish}. If the section has |
0a6347b4 |
393 | no keyword (an unnumbered chapter created using \c{\\U}), this |
394 | directive falls back to doing the same thing as \c{%N}. |
395 | |
396 | These formatting directives can also be used in the |
397 | \cw{\\cfg\{xhtml-template-fragment\}} configuration directive (see |
398 | \k{output-html-misc}). |
399 | |
400 | } |
401 | |
402 | \dt \I{\cw{\\cfg\{xhtml-single-filename\}}}\cw{\\cfg\{xhtml-single-filename\}\{}\e{filename}\cw{\}} |
403 | |
404 | \dd Sets the file name in which to store the entire document, if |
405 | Halibut is configured (using \c{\\cfg\{xhtml-leaf-level\}\{0\}} to |
406 | produce a single self-contained file. Both this directive \e{and} |
407 | \c{\\cfg\{xhtml-leaf-level\}\{0\}} are implicitly generated if you |
408 | provide a file name parameter after the command-line option |
409 | \i\c{--html} (see \k{running-options}). |
410 | |
16ea3abe |
411 | \S{output-html-split} Controlling the splitting into HTML files |
412 | |
413 | By default, the HTML output from Halibut is split into multiple |
414 | files. Each file typically contains a single chapter or section and |
415 | everything below it, unless subsections of that chapter are |
416 | themselves split off into further files. |
417 | |
418 | Most files also contain a contents section, giving hyperlinks to the |
419 | sections in the file and/or the sections below it. |
420 | |
421 | The configuration directives listed below allow you to configure the |
422 | splitting into files, and the details of the contents sections. |
423 | |
339cbe09 |
424 | \dt \I{\cw{\\cfg\{xhtml-leaf-level\}}}\cw{\\cfg\{xhtml-leaf-level\}\{}\e{depth}\cw{\}} |
16ea3abe |
425 | |
426 | \dd This setting indicates the depth of section which should be |
339cbe09 |
427 | given a \I{leaf file}\q{leaf} file (a file with no sub-files). So if |
428 | you set it to 1, for example, then every chapter will be given its |
429 | own HTML file, plus a top-level \i{contents file}. If you set this |
430 | to 2, then each chapter \e{and} each \c{\\H} section will have a |
431 | file, and the chapter files will mostly just contain links to their |
432 | \i{sub-file}s. |
16ea3abe |
433 | |
434 | \lcont{ |
435 | |
436 | If you set this option to zero, then the whole document will appear |
437 | in a single file. If you do this, Halibut will call that file |
339cbe09 |
438 | \i\c{Manual.html} instead of \i\c{Contents.html}. |
16ea3abe |
439 | |
0a6347b4 |
440 | This option is automatically set to zero if you provide a file name |
441 | parameter after the command-line option \i\c{--html} (see |
442 | \k{running-options}), because you have specified a single file name |
443 | and so Halibut assumes you want the whole document to be placed in |
444 | that file. |
445 | |
16ea3abe |
446 | } |
447 | |
339cbe09 |
448 | \dt \I{\cw{\\cfg\{xhtml-contents-depth\}}}\cw{\\cfg\{xhtml-contents-depth-}\e{level}\cw{\}\{}\e{depth}\cw{\}} |
16ea3abe |
449 | |
339cbe09 |
450 | \dd This directive allows you to specify how \I{depth of |
451 | contents}deep the contents section in a particular file should go. |
16ea3abe |
452 | |
453 | \lcont{ |
454 | |
455 | The \e{level} parameter indicates which level of contents section |
456 | you are dealing with. 0 denotes the main contents section in the |
457 | topmost file \c{Contents.html}; 1 denotes a contents section in a |
458 | chapter file; 2 is a contents section in a file containing a \c{\\H} |
459 | heading, and so on. Currently you can't go below level 5 (which |
460 | corresponds to a \c{\\S3} heading). |
461 | |
462 | The \e{depth} parameter indicates the maximum depth of heading which |
463 | will be shown in this contents section. Again, 1 denotes a chapter, |
464 | 2 is a \c{\\H} heading, 3 is a \c{\\S} heading, and so on. |
465 | |
466 | So, for example: \cw{\\cfg\{xhtml-contents-depth-1\}\{3\}} instructs |
467 | Halibut to put contents links in chapter files for all sections down |
468 | to \c{\\S} level, but not to go into any more detail than that. |
469 | |
470 | } |
471 | |
472 | \# FIXME: this is utterly ghastly. For a start, it should include |
473 | \# the level as a separate argument, like the text section config |
474 | \# directives. Secondly, it shouldn't be limited in depth! |
475 | |
339cbe09 |
476 | \dt \I{\cw{\\cfg\{xhtml-leaf-contains-contents\}}}\cw{\\cfg\{xhtml-leaf-contains-contents\}\{}\e{boolean}\cw{\}} |
16ea3abe |
477 | |
478 | \dd If you set this to \c{true}, then each leaf file will contain |
479 | its own contents section which summarises the text within it. |
480 | |
339cbe09 |
481 | \dt \I{\cw{\\cfg\{xhtml-leaf-smallest-contents\}}}\cw{\\cfg\{xhtml-leaf-smallest-contents\}\{}\e{number}\cw{\}} |
16ea3abe |
482 | |
483 | \dd Contents sections in leaf files are not output at all if they |
484 | contain very few entries (on the assumption that it just isn't worth |
485 | bothering). This directive configures the minimum number of entries |
486 | required in a leaf contents section to make Halibut bother |
487 | generating it at all. |
488 | |
489 | \S{output-html-html} Including pieces of your own HTML |
490 | |
491 | The directives in this section allow you to supply pieces of |
339cbe09 |
492 | \I{HTML}\i{verbatim HTML} code, which will be included in various |
493 | parts of the output files. |
16ea3abe |
494 | |
339cbe09 |
495 | \dt \I{\cw{\\cfg\{xhtml-head-end\}}}\cw{\\cfg\{xhtml-head-end\}\{}\e{HTML text}\cw{\}} |
16ea3abe |
496 | |
497 | \dd The text you provide in this directive is placed at the end of |
339cbe09 |
498 | the \i\cw{<HEAD>} section of each output HTML file. So this is a |
499 | good place to put, for example, a link to a \i{CSS} \i{stylesheet}. |
16ea3abe |
500 | |
339cbe09 |
501 | \dt \I{\cw{\\cfg\{xhtml-body-tag\}}}\cw{\\cfg\{xhtml-body-tag\}\{}\e{HTML text}\cw{\}} |
16ea3abe |
502 | |
503 | \dd The text you provide in this directive is used in place of the |
339cbe09 |
504 | \i\cw{<BODY>} tag in each output file. So if you wanted to define a |
505 | \i{background colour}, for example, you could write |
16ea3abe |
506 | \cw{\\cfg\{xhtml-body-tag\}\{<body bg="#123456">\}}. |
507 | |
339cbe09 |
508 | \dt \I{\cw{\\cfg\{xhtml-body-start\}}}\cw{\\cfg\{xhtml-body-start\}\{}\e{HTML text}\cw{\}} |
16ea3abe |
509 | |
510 | \dd The text you provide in this directive is placed at the |
339cbe09 |
511 | beginning of the \i\cw{<BODY>} section of each output HTML file. So |
512 | if you intend your HTML files to be part of a web site with a |
513 | standard \i{house style}, and the style needs a \i{header} at the |
514 | top of every page, this is where you can add that header. |
16ea3abe |
515 | |
339cbe09 |
516 | \dt \I{\cw{\\cfg\{xhtml-body-end\}}}\cw{\\cfg\{xhtml-body-end\}\{}\e{HTML text}\cw{\}} |
16ea3abe |
517 | |
339cbe09 |
518 | \dd The text you provide in this directive is placed at the end of |
519 | the \i\cw{<BODY>} section of each output HTML file. So if you intend |
520 | your HTML files to be part of a web site with a standard \i{house |
521 | style}, and the style needs a \i{footer} at the bottom of every |
522 | page, this is where you can add that footer. |
16ea3abe |
523 | |
339cbe09 |
524 | \dt \I{\cw{\\cfg\{xhtml-address-start\}}}\cw{\\cfg\{xhtml-address-start\}\{}\e{HTML text}\cw{\}} |
16ea3abe |
525 | |
526 | \dd The text you provide in this directive is placed at the |
339cbe09 |
527 | beginning of the \i\cw{<ADDRESS>} section at the bottom of each |
528 | output HTML file. This might be a good place to put authors' |
529 | \i{contact details}, for example. |
16ea3abe |
530 | |
339cbe09 |
531 | \dt \I{\cw{\\cfg\{xhtml-address-end\}}}\cw{\\cfg\{xhtml-address-end\}\{}\e{HTML text}\cw{\}} |
16ea3abe |
532 | |
339cbe09 |
533 | \dd The text you provide in this directive is placed at the end of |
534 | the \i\cw{<ADDRESS>} section at the bottom of each output HTML file, |
535 | after the version IDs (if present). |
16ea3abe |
536 | |
339cbe09 |
537 | \dt \I{\cw{\\cfg\{xhtml-navigation-attributes\}}}\cw{\\cfg\{xhtml-navigation-attributes\}\{}\e{HTML attributes}\cw{\}} |
16ea3abe |
538 | |
539 | \dd The text you provide in this directive is included inside the |
339cbe09 |
540 | \cw{<P>} tag containing the \i{navigation links} at the top of each |
541 | page (\i{\q{Previous}} / \i{\q{Contents}} / \i{\q{Next}}). So if you |
542 | wanted the navigation links to have a particular CSS style, you |
543 | could write |
16ea3abe |
544 | \cw{\\cfg\{xhtml-navigation-attributes\}\{class="foo"\}}, and the |
545 | navigation-links paragraph would then begin with the tag \cw{<p |
546 | class="foo">}. |
547 | |
339cbe09 |
548 | \S{output-html-headings} \ii{Configuring heading display} |
16ea3abe |
549 | |
339cbe09 |
550 | \dt \I{\cw{\\cfg\{xhtml-chapter-numeric\}}}\cw{\\cfg\{xhtml-chapter-numeric\}\{}\e{boolean}\cw{\}} |
16ea3abe |
551 | |
552 | \dd If this is set to \c{true}, then chapter headings will not |
553 | contain the word \q{Chapter} (or whatever other word you have |
554 | defined in its place - see \k{input-sections} and \k{input-config}); |
555 | they will just contain the chapter \e{number}, followed by the |
556 | chapter title. If you set this to \c{false}, chapter headings will |
557 | be prefixed by \q{Chapter} or equivalent. |
558 | |
339cbe09 |
559 | \dt \I{\cw{\\cfg\{xhtml-chapter-suffix\}}}\cw{\\cfg\{xhtml-chapter-suffix\}\{}\e{text}\cw{\}} |
16ea3abe |
560 | |
561 | \dd This specifies the suffix text to be appended to the chapter |
562 | number, before displaying the chapter title. For example, if you set |
b7747050 |
563 | this to \cq{:\_}, then the chapter title might look something |
16ea3abe |
564 | like \q{Chapter 2: Doing Things}. |
565 | |
78c73085 |
566 | \dt \I{\cw{\\cfg\{xhtml-section-numeric\}}}\cw{\\cfg\{xhtml-section-numeric\}\{}\e{level}\cw{\}\{}\e{boolean}\cw{\}} |
16ea3abe |
567 | |
568 | \dd Specifies whether section headings at a particular level should |
569 | contain the word \q{Section} or equivalent (if \c{false}), or should |
570 | be numeric only (if \c{true}). The \e{level} parameter specifies |
571 | which level of section headings you want to affect: 0 means |
572 | first-level headings (\c{\\H}), 1 means second-level headings |
573 | (\c{\\S}), 2 means the level below that (\c{\\S2}), and so on. |
574 | |
78c73085 |
575 | \dt \I{\cw{\\cfg\{xhtml-section-suffix\}}}\cw{\\cfg\{xhtml-section-suffix\}\{}\e{level}\cw{\}\{}\e{text}\cw{\}} |
16ea3abe |
576 | |
577 | \dd Specifies the suffix text to be appended to section numbers at a |
578 | particular level, before displaying the section title. |
579 | |
580 | \S{output-html-misc} Miscellaneous options |
581 | |
0a6347b4 |
582 | \dt \I{\cw{\\cfg\{xhtml-template-fragment\}}}\cw{\\cfg\{xhtml-template-fragment\}\{}\e{template}\cw{\}} |
583 | |
584 | \dd This directive lets you specify a \i{template}, with exactly the |
585 | same syntax used in \cw{\\cfg\{xhtml-template-filename\}} (see |
fc8e7adb |
586 | \k{output-html-file}), to be used for the anchor names (\i\cw{<A |
587 | NAME="...">}) used to allow URLs to refer to specific sections |
b7747050 |
588 | within a particular HTML file. So if you set this to \cq{%k}, |
fc8e7adb |
589 | for example, then each individual section in your document will be |
0a6347b4 |
590 | addressable by means of a URL ending in a \c{#} followed by your |
591 | internal section keyword. |
592 | |
339cbe09 |
593 | \dt \I{\cw{\\cfg\{xhtml-versionid\}}}\cw{\\cfg\{xhtml-versionid\}\{}\e{boolean}\cw{\}} |
16ea3abe |
594 | |
339cbe09 |
595 | \dd If this is set to \c{true}, \i{version ID paragraphs} (defined using |
596 | the \i\c{\\versionid} command - see \k{input-blurb}) will be included |
597 | visibly in the \i\cw{<ADDRESS>} section at the bottom of each HTML |
16ea3abe |
598 | file. If it is set to \c{false}, they will be omitted completely. |
599 | |
600 | \# FIXME: surely it would be better to include them in HTML |
601 | \# comments? The only question is whether they should be _visible_. |
602 | |
339cbe09 |
603 | \dt \I{\cw{\\cfg\{xhtml-suppress-address\}}}\cw{\\cfg\{xhtml-suppress-address\}\{}\e{boolean}\cw{\}} |
16ea3abe |
604 | |
339cbe09 |
605 | \dd If this is set to \c{true}, the \i\cw{<ADDRESS>} section at the |
16ea3abe |
606 | bottom of each HTML file will be omitted completely. (This will |
339cbe09 |
607 | therefore also cause \i{version IDs} not to be included.) |
16ea3abe |
608 | |
339cbe09 |
609 | \dt \I{\cw{\\cfg\{xhtml-author\}}}\cw{\\cfg\{xhtml-author\}\{}\e{text}\cw{\}} |
16ea3abe |
610 | |
339cbe09 |
611 | \dd The text supplied here goes in a \I{\cw{<META>} tags}\cw{<META |
612 | name="author">} tag in the output HTML files, so that browsers which |
613 | support this can automatically identify the \i{author} of the document. |
16ea3abe |
614 | |
339cbe09 |
615 | \dt \I{\cw{\\cfg\{xhtml-description\}}}\cw{\\cfg\{xhtml-description\}\{}\e{text}\cw{\}} |
16ea3abe |
616 | |
339cbe09 |
617 | \dd The text supplied here goes in a \I{\cw{<META>} tags}\cw{<META |
618 | name="description">} tag in the output HTML files, so that browsers |
619 | which support this can easily pick out a brief \I{description, of |
620 | document}description of the document. |
16ea3abe |
621 | |
622 | \S{output-html-defaults} Default settings |
623 | |
339cbe09 |
624 | The \i{default settings} for Halibut's HTML output format are: |
16ea3abe |
625 | |
0a6347b4 |
626 | \c \cfg{xhtml-contents-filename}{Contents.html} |
627 | \c \cfg{xhtml-index-filename}{IndexPage.html} |
628 | \c \cfg{xhtml-template-filename}{%n.html} |
629 | \c \cfg{xhtml-single-filename}{Manual.html} |
630 | \c \cfg{xhtml-template-fragment}{%b} |
631 | \c |
16ea3abe |
632 | \c \cfg{xhtml-leaf-level}{2} |
633 | \c \cfg{xhtml-leaf-contains-contents}{false} |
634 | \c \cfg{xhtml-leaf-smallest-contents}{4} |
635 | \c \cfg{xhtml-contents-depth-0}{2} |
636 | \c \cfg{xhtml-contents-depth-1}{3} |
637 | \c \cfg{xhtml-contents-depth-2}{4} |
638 | \c \cfg{xhtml-contents-depth-3}{5} |
639 | \c \cfg{xhtml-contents-depth-4}{6} |
640 | \c \cfg{xhtml-contents-depth-5}{7} |
641 | \c |
642 | \c \cfg{xhtml-head-end}{} |
643 | \c \cfg{xhtml-body-tag}{<body>} |
644 | \c \cfg{xhtml-body-start}{} |
645 | \c \cfg{xhtml-body-end}{} |
646 | \c \cfg{xhtml-address-start}{} |
647 | \c \cfg{xhtml-address-end}{} |
648 | \c \cfg{xhtml-navigation-attributes}{} |
649 | \c |
650 | \c \cfg{xhtml-versionid}{true} |
651 | \c \cfg{xhtml-suppress-address}{false} |
652 | \c \cfg{xhtml-author}{} |
653 | \c \cfg{xhtml-description}{} |
654 | \c |
655 | \c \cfg{xhtml-chapter-numeric}{false} |
656 | \c \cfg{xhtml-chapter-suffix}{: } |
657 | \c |
658 | \c \cfg{xhtml-section-numeric}{0}{true} |
659 | \c \cfg{xhtml-section-suffix}{0}{ } |
660 | \c |
661 | \c \cfg{xhtml-section-numeric}{1}{true} |
662 | \c \cfg{xhtml-section-suffix}{1}{ } |
663 | \c |
664 | \c ... and so on for all section levels below this ... |
665 | \e iiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiii |
666 | |
667 | \H{output-whlp} Windows Help |
668 | |
339cbe09 |
669 | This output format generates data that can be used by the \i{Windows |
0a6347b4 |
670 | Help} program \cw{WINHELP.EXE}. There are two actual files |
671 | generated, one ending in \c{.hlp} and the other ending in \c{.cnt}. |
672 | |
6b4dfd74 |
673 | Currently, the output is harcoded to be in the \q{\i{Win1252}} |
674 | character set. |
6069815a |
675 | |
0a6347b4 |
676 | The Windows Help output format supports the following configuration |
677 | directives: |
678 | |
6b4dfd74 |
679 | \S{output-whlp-file} Output file name |
680 | |
0a6347b4 |
681 | \dt \I{\cw{\\cfg\{winhelp-filename\}}}\cw{\\cfg\{winhelp-filename\}\{}\e{filename}\cw{\}} |
682 | |
683 | \dd Sets the \i{output file name} in which to store the man page. |
684 | This directive is implicitly generated if you provide a file name |
685 | parameter after the command-line option \i\c{--winhelp} (see |
686 | \k{running-options}). |
687 | |
688 | \lcont{ |
689 | |
690 | Your output file name should end with \c{.hlp}; if it doesn't, |
691 | Halibut will append it. Halibut will also generate a contents file |
692 | (ending in \c{.cnt}) alongside the file name you specify. |
693 | |
694 | } |
16ea3abe |
695 | |
6b4dfd74 |
696 | \S{output-whlp-characters} Configuring the characters used |
697 | |
698 | \dt \I{\cw{\\cfg\{winhelp-bullet\}}}\cw{\\cfg\{winhelp-bullet\}\{}\e{text}\cw{\}}[\cw{\{}\e{text}\cw{\}}...] |
699 | |
700 | \dd Specifies the text to use as the \i{bullet} in bulletted lists. |
701 | You can specify multiple fallback options. Works exactly like the |
702 | \cw{\\cfg\{text-bullet\}} directive (see |
703 | \k{output-text-characters}). |
704 | |
705 | \dt \I{\cw{\\cfg\{winhelp-quotes\}}}\cw{\\cfg\{winhelp-quotes\}\{}\e{open-quote}\cw{\}\{}\e{close-quote}\cw{\}}[\cw{\{}\e{open-quote}\cw{\}\{}\e{close-quote}...\cw{\}}] |
706 | |
707 | \dd Specifies the quotation marks to use, overriding any |
708 | \cw{\\cfg\{quotes\}} directive. You can specify multiple |
709 | fallback options. Works exactly like the \cw{\\cfg\{text-quotes\}} |
710 | directive (see \k{output-text-characters}). |
711 | |
712 | \S{output-whlp-misc} Miscellaneous configuration options |
713 | |
6069815a |
714 | \dt \I{\cw{\\cfg\{winhelp-contents-titlepage\}}}\cw{\\cfg\{winhelp-contents-titlepage\}\{}\e{title}\cw{\}} |
715 | |
716 | \dd Sets the text used to describe the help page containing the blurb |
717 | (see \k{input-blurb}) and table of contents. |
718 | |
719 | \dt |
720 | \I{\cw{\\cfg\{winhelp-section-suffix\}}}\cw{\\cfg\{winhelp-section-suffix\}\{}\e{text}\cw{\}} |
721 | |
722 | \dd Specifies the \I{suffix text, in section titles}suffix text to |
723 | be appended to section numbers, before displaying the section title. |
724 | (Applies to all levels.) |
725 | |
726 | \dt \I{\cw{\\cfg\{winhelp-list-suffix\}}}\cw{\\cfg\{winhelp-list-suffix\}\{}\e{text}\cw{\}} |
727 | |
728 | \dd This text is appended to the number on a \i{numbered list} item, |
729 | in exactly the same way as \cw{\\cfg\{text-list-suffix\}} (see |
6069815a |
730 | \k{output-text-characters}). |
731 | |
339cbe09 |
732 | \dt \I{\cw{\\cfg\{winhelp-topic\}}}\cw{\\cfg\{winhelp-topic\}\{}\e{topic-name}\cw{\}} |
16ea3abe |
733 | |
339cbe09 |
734 | \dd This directive defines a Windows \i{Help topic} name in the current |
16ea3abe |
735 | section. Topic names can be used by the program invoking |
736 | \cw{WINHELP.EXE} to jump straight to a particular section. So you |
339cbe09 |
737 | can use this for \i{context-sensitive help}. |
16ea3abe |
738 | |
739 | \lcont{ |
740 | |
741 | For example, if you used this directive in a particular section: |
742 | |
743 | \c \cfg{winhelp-topic}{savingfiles} |
744 | |
745 | then a Windows application could invoke Windows Help to jump to that |
746 | particular section in the help file like this: |
747 | |
748 | \c WinHelp(hwnd, "mydoc.hlp", HELP_COMMAND, |
749 | \c (DWORD)"JI(`',`savingfiles')"); |
750 | |
751 | You can use this configuration directive many times, in many |
752 | different subsections of your document, in order to define a lot of |
753 | different help contexts which you can use in this way. |
754 | |
755 | } |
756 | |
6b4dfd74 |
757 | \S{output-whlp-defaults} Default settings |
758 | |
0a6347b4 |
759 | The \i{default settings} for the Windows Help output format are: |
760 | |
761 | \c \cfg{winhelp-filename}{output.hlp} |
6b4dfd74 |
762 | \c |
763 | \c \cfg{winhelp-bullet}{\u2022}{-} |
764 | \c \cfg{winhelp-quotes}{\u2018}{\u2019}{"}{"} |
765 | \c |
6069815a |
766 | \c \cfg{winhelp-contents-titlepage}{Title page} |
767 | \c \cfg{winhelp-section-suffix}{: } |
768 | \c \cfg{winhelp-list-suffix}{.} |
0a6347b4 |
769 | |
770 | and no \c{\\cfg\{winhelp-topic\}} directives anywhere. |
771 | |
16ea3abe |
772 | \H{output-man} Unix \cw{man} pages |
773 | |
339cbe09 |
774 | This output format generates a Unix \i{\cw{man} page}. That is to say, |
775 | it generates \i\c{nroff} input designed to work with the \c{-mandoc} |
16ea3abe |
776 | macro package. |
777 | |
778 | The available configuration options for this format are as follows: |
779 | |
6b4dfd74 |
780 | \S{output-man-file} Output file name |
781 | |
0a6347b4 |
782 | \dt \I{\cw{\\cfg\{man-filename\}}}\cw{\\cfg\{man-filename\}\{}\e{filename}\cw{\}} |
783 | |
784 | \dd Sets the \i{output file name} in which to store the man page. |
785 | This directive is implicitly generated if you provide a file name |
786 | parameter after the command-line option \i\c{--man} (see |
787 | \k{running-options}). |
788 | |
6b4dfd74 |
789 | \S{output-man-identity} Configuring headers and footers |
790 | |
339cbe09 |
791 | \dt \I{\cw{\\cfg\{man-identity\}}}\cw{\\cfg\{man-identity\}\{}\e{text}\cw{\}\{}\e{text...}\cw{\}} |
16ea3abe |
792 | |
339cbe09 |
793 | \dd This directive is used to generate the initial \i{\c{.TH} |
794 | directive} that appears at the top of a \cw{man} page. It expects to |
795 | be followed by some number of brace pairs containing text, which will |
796 | be used in the \i{headers} and \i{footers} of the formatted output. |
16ea3abe |
797 | |
798 | \lcont{ |
799 | |
800 | A traditional order for the arguments appears to be: |
801 | |
802 | \n The name of the program. |
803 | |
804 | \n The (numeric) manual section. |
805 | |
806 | \n The date that the \cw{man} page was written. |
807 | |
808 | \n The name of any containing suite of which the program is a part. |
809 | |
339cbe09 |
810 | \n The name of the \i{author} of the \cw{man} page. |
16ea3abe |
811 | |
812 | For example, a typical \cw{man} page might contain |
813 | |
fc8e7adb |
814 | \c \cfg{man-identity}{make-foo}{1}{June 2003}{foo-utils}{Fred |
815 | \c Bloggs} |
16ea3abe |
816 | |
817 | } |
818 | |
6b4dfd74 |
819 | \S{output-man-headings} Configuring heading display |
820 | |
339cbe09 |
821 | \dt \I{\cw{\\cfg\{man-headnumbers\}}}\cw{\\cfg\{man-headnumbers\}\{}\e{boolean}\cw{\}} |
16ea3abe |
822 | |
339cbe09 |
823 | \dd If this is set to \c{true}, then \i{section headings} in the |
824 | \cw{man} page will have their \i{section numbers} displayed as usual. If |
16ea3abe |
825 | set to \c{false}, the section numbers will be omitted. (\cw{man} |
826 | pages traditionally have section names such as \q{SYNOPSIS}, |
827 | \q{OPTIONS} and \q{BUGS}, and do not typically number them, so |
828 | \c{false} is the setting which conforms most closely to normal |
829 | \cw{man} style.) |
830 | |
339cbe09 |
831 | \dt \I{\cw{\\cfg\{man-mindepth\}}}\cw{\\cfg\{man-mindepth\}\{}\e{depth}\cw{\}} |
16ea3abe |
832 | |
833 | \dd If this is set to a number greater than 0, then section headings |
834 | \e{higher} than the given depth will not be displayed. If it is set |
835 | to zero, all section headings will be displayed as normal. |
836 | |
837 | \lcont{ |
838 | |
839 | The point of this is so that you can use the same Halibut input file |
840 | to generate a quick-reference \cw{man} page for a program, \e{and} to |
841 | include that \cw{man} page as an appendix in your program's full manual. |
842 | If you are to include the \cw{man} page as an appendix, then the internal |
843 | headings within the page will probably need to be at \c{\\H} or |
844 | \c{\\S} level; therefore, when you format that input file on its own |
845 | to create the \cw{man} page itself, you will need to have defined a |
846 | \c{\\C} and possibly a \c{\\H} heading beforehand, which you don't |
847 | want to see displayed. |
848 | |
849 | Here's an example. You might have a file \c{appendix.but}, which |
850 | simply says |
851 | |
852 | \c \A{manpages} \cw{man} pages for the Foo tool suite |
853 | \c |
854 | \c \cfg{man-mindepth}{2} |
855 | |
856 | Then you have a file \c{make-foo.but}, and probably others like it |
857 | as well, each of which looks something like this: |
858 | |
fc8e7adb |
859 | \c \cfg{man-identity}{make-foo}{1}{June 2003}{foo-utils}{Fred |
860 | \c Bloggs} |
16ea3abe |
861 | \c |
862 | \c \H{man-foo} \cw{man} page for \c{make-foo} |
863 | \c |
864 | \c \S{man-foo-name} NAME |
865 | \c |
866 | \c \c{make-foo} - create Foo files for the Foo tool suite |
867 | \c |
868 | \c \S{man-foo-synopsis} SYNOPSIS |
869 | \c |
870 | \c ... and so on ... |
871 | \e iiiiiiiiiiiiiiiii |
872 | |
873 | So when you're generating your main manual, you can include |
874 | \c{appendix.but} followed by \c{make-foo.but} and any other \cw{man} |
875 | pages you have, and your \cw{man} pages will be formatted neatly as |
876 | part of an appendix. Then, in a separate run of Halibut, you can |
877 | just do |
878 | |
879 | \c halibut appendix.but make-foo.but |
880 | |
881 | and this will generate a \cw{man} page \c{output.1}, in which the |
882 | headings \q{\cw{man} pages for the Foo tool suite} and \q{\cw{man} |
883 | page for \c{make-foo}} will not be displayed because of the |
884 | \c{man-mindepth} directive. So the first visible heading in the |
885 | output \cw{man} page will be \q{NAME}, exactly as a user would |
886 | expect. |
887 | |
888 | } |
889 | |
6b4dfd74 |
890 | \S{output-man-characters} Configuring the characters used |
891 | |
6069815a |
892 | \dt \I{\cw{\\cfg\{man-charset\}}}\cw{\\cfg\{man-charset\}\{}\e{character set}\cw{\}} |
893 | |
894 | \dd Specifies what character set the output should be in, similarly to |
6b4dfd74 |
895 | \cw{\\cfg\{text-charset\}} (see \k{output-text-characters}). |
6069815a |
896 | |
897 | \# FIXME: you're probably on your own in making sure that it's |
898 | sensible to output man pages in that charset. |
899 | |
900 | \dt \I{\cw{\\cfg\{man-bullet\}}}\cw{\\cfg\{man-bullet\}\{}\e{text}\cw{\}}[\cw{\{}\e{text}\cw{\}}...] |
901 | |
902 | \dd Specifies the text to use as the \i{bullet} in bulletted lists. |
903 | You can specify multiple fallback options. Works exactly like the |
904 | \cw{\\cfg\{text-bullet\}} directive (see \k{output-text-characters}). |
905 | |
906 | \dt \I{\cw{\\cfg\{man-quotes\}}}\cw{\\cfg\{man-quotes\}\{}\e{open-quote}\cw{\}\{}\e{close-quote}\cw{\}}[\cw{\{}\e{open-quote}\cw{\}\{}\e{close-quote}...\cw{\}}] |
907 | |
908 | \dd Specifies the quotation marks to use, overriding any |
909 | \cw{\\cfg\{quotes\}} directive. You can specify multiple |
910 | fallback options. Works exactly like the \cw{\\cfg\{text-quotes\}} |
911 | directive (see \k{output-text-characters}). |
912 | |
6b4dfd74 |
913 | \S{output-man-defaults} Default settings |
914 | |
339cbe09 |
915 | The \i{default settings} for the \cw{man} page output format are: |
16ea3abe |
916 | |
0a6347b4 |
917 | \c \cfg{man-filename}{output.1} |
6b4dfd74 |
918 | \c |
16ea3abe |
919 | \c \cfg{man-identity}{} |
6b4dfd74 |
920 | \c |
16ea3abe |
921 | \c \cfg{man-headnumbers}{false} |
922 | \c \cfg{man-mindepth}{0} |
6b4dfd74 |
923 | \c |
6069815a |
924 | \c \cfg{man-charset}{ASCII} |
925 | \c \cfg{man-bullet}{\u2022}{o} |
926 | \c \cfg{man-quotes}{\u2018}{\u2019}{"}{"} |
43f61c25 |
927 | |
928 | \H{output-info} GNU \c{info} |
929 | |
930 | This output format generates files which can be used with the \i{GNU |
931 | \c{info}} program. |
932 | |
933 | There are typically multiple output files: a primary file whose name |
934 | usually ends in \c{.info}, and one or more subsidiary files whose |
935 | names have numbers on the end, so that they end in \c{.info-1}, |
936 | \c{.info-2} and so on. Alternatively, this output format can be |
937 | configured to output a single large file containing the whole |
938 | document. |
939 | |
940 | The \c{info} output format supports the following configuration |
941 | directives: |
942 | |
6b4dfd74 |
943 | \S{output-info-file} Controlling the output filenames |
944 | |
43f61c25 |
945 | \dt \I{\cw{\\cfg\{info-filename\}}}\cw{\\cfg\{info-filename\}\{}\e{filename}\cw{\}} |
946 | |
947 | \dd Sets the output file name in which to store the \c{info} file. |
948 | This directive is implicitly generated if you provide a file name |
949 | parameter after the command-line option \i\c{--info} (see |
950 | \k{running-options}). |
951 | |
952 | \lcont{ |
953 | |
954 | The suffixes \c{-1}, \c{-2}, \c{-3} and so on will be appended to |
955 | your output file name to produce any subsidiary files required. |
956 | |
957 | Note that \c{info} files refer to their own names internally, so |
958 | these files cannot be \I{renaming \c{info} files}renamed after |
959 | creation and remain useful. |
960 | |
961 | } |
962 | |
6b4dfd74 |
963 | \dt \I{\cw{\\cfg\{info-max-file-size\}}}\cw{\\cfg\{info-max-file-size\}\{}\e{bytes}\cw{\}} |
964 | |
965 | \dd Sets the preferred \i{maximum file size} for each subsidiary |
966 | file. As a special case, if you set this to zero, there will be no |
967 | subsidiary files and the whole document will be placed in a single |
968 | self-contained output file. (However, note that this file can still |
969 | not be renamed usefully.) |
970 | |
971 | \lcont{ |
972 | |
973 | The preferred maximum file size is only a guideline. Halibut may be |
974 | forced to exceed it if a single section of the document is larger |
975 | than the maximum size (since individual \c{info} nodes may not be |
976 | split between files). |
977 | |
978 | } |
979 | |
980 | \S{output-info-dimensions} Indentation and line width |
981 | |
5b1d0032 |
982 | \dt \I{\cw{\\cfg\{info-width\}}}\cw{\\cfg\{info-width\}\{}\e{width}\cw{\}} |
983 | |
984 | \dd Sets the \I{text width}width of the main part of the document, |
985 | in characters. Works exactly like the \cw{\\cfg\{text-width\}} |
986 | directive (see \k{output-text-dimensions}). |
987 | |
988 | \dt \I{\cw{\\cfg\{info-indent-code\}}}\cw{\\cfg\{info-indent-code\}\{}\e{indent}\cw{\}} |
989 | |
990 | \dd Specifies the extra indentation for \I{code paragraphs, |
991 | indentation} code paragraphs. Works exactly like the |
992 | \cw{\\cfg\{text-indent-code\}} directive (see |
993 | \k{output-text-dimensions}). |
994 | |
995 | \dt \I{\cw{\\cfg\{info-index-width\}}}\cw{\\cfg\{info-index-width\}\{}\e{width}\cw{\}} |
996 | |
997 | \dd Specifies how much horizontal space to leave in the index node |
998 | for the text of \i{index terms}, before displaying the sections the |
999 | terms occur in. |
1000 | |
1001 | \dt \I{\cw{\\cfg\{info-list-indent\}}}\cw{\\cfg\{info-list-indent\}\{}\e{indent}\cw{\}} |
1002 | |
1003 | \dd Specifies the extra indentation before the bullet or number in a |
1004 | \I{bulletted list, indentation}\I{numbered list, indentation}list |
1005 | item. Works exactly like the \cw{\\cfg\{text-list-indent\}} |
1006 | directive (see \k{output-text-dimensions}). |
1007 | |
1008 | \dt \I{\cw{\\cfg\{info-listitem-indent\}}}\cw{\\cfg\{info-listitem-indent\}\{}\e{indent}\cw{\}} |
1009 | |
1010 | \dd Specifies the additional indentation before the body of a list |
1011 | item. Works exactly like the \cw{\\cfg\{text-listitem-indent\}} |
1012 | directive (see \k{output-text-dimensions}). |
1013 | |
6b4dfd74 |
1014 | \S{output-info-headings} Configuring heading display |
6069815a |
1015 | |
5b1d0032 |
1016 | \dt \I{\cw{\\cfg\{info-section-suffix\}}}\cw{\\cfg\{info-section-suffix\}\{}\e{text}\cw{\}} |
1017 | |
1018 | \dd Specifies the suffix text to be appended to each section number |
1019 | before displaying the section title. For example, if you set this to |
b7747050 |
1020 | \cq{:\_}, then a typical section title might look something like |
5b1d0032 |
1021 | \q{Section 3.1: Something Like This}. |
1022 | |
1023 | \dt \I{\cw{\\cfg\{info-underline\}}}\cw{\\cfg\{info-underline\}\{}\e{text}\cw{\}}[\cw{\{}\e{text}\cw{\}}...] |
1024 | |
1025 | \dd Specifies the text to be used to underline section titles. Works |
1026 | very much like the \cw{\\cfg\{text-chapter-underline\}} directive |
1027 | (see \k{output-text-headings}). You can specify more than one |
1028 | option, and Halibut will choose the first one supported by the |
1029 | character set. |
1030 | |
6b4dfd74 |
1031 | \S{output-info-characters} Controlling the characters used |
1032 | |
1033 | \dt \I{\cw{\\cfg\{info-charset\}}}\cw{\\cfg\{info-charset\}\{}\e{character set}\cw{\}} |
1034 | |
1035 | \dd Specifies what character set the output should be in, similarly to |
1036 | \cw{\\cfg\{text-charset\}} (see \k{output-text-characters}). |
1037 | |
1038 | \# FIXME: if you try sufficiently hard, you can probably find an |
1039 | output encoding that will break the info format by trampling on its |
1040 | special characters. So either don't do that, or tell us what we should |
1041 | do about it. |
1042 | |
5b1d0032 |
1043 | \dt \I{\cw{\\cfg\{info-bullet\}}}\cw{\\cfg\{info-bullet\}\{}\e{text}\cw{\}}[\cw{\{}\e{text}\cw{\}}...] |
1044 | |
1045 | \dd Specifies the text to use as the \i{bullet} in bulletted lists. |
1046 | You can specify multiple fallback options. Works exactly like the |
1047 | \cw{\\cfg\{text-bullet\}} directive (see |
1048 | \k{output-text-characters}). |
1049 | |
1050 | \dt \I{\cw{\\cfg\{info-rule\}}}\cw{\\cfg\{info-rule\}\{}\e{text}\cw{\}}[\cw{\{}\e{text}\cw{\}}...] |
1051 | |
1052 | \dd Specifies the text used to draw \i{horizontal rules}. You can |
1053 | specify multiple fallback options. Works exactly like the |
1054 | \cw{\\cfg\{text-rule\}} directive (see \k{output-text-characters}). |
1055 | |
1056 | \dt \I{\cw{\\cfg\{info-quotes\}}}\cw{\\cfg\{info-quotes\}\{}\e{open-quote}\cw{\}\{}\e{close-quote}\cw{\}}[\cw{\{}\e{open-quote}\cw{\}\{}\e{close-quote}...\cw{\}}] |
1057 | |
6069815a |
1058 | \dd Specifies the quotation marks to use, overriding any |
1059 | \cw{\\cfg\{quotes\}} directive. You can specify multiple |
5b1d0032 |
1060 | fallback options. Works exactly like the \cw{\\cfg\{text-quotes\}} |
1061 | directive (see \k{output-text-characters}). |
1062 | |
1063 | \dt \I{\cw{\\cfg\{info-emphasis\}}}\cw{\\cfg\{info-emphasis\}\{}\e{start-emph}\cw{\}\{}\e{end-emph}\cw{\}}[\cw{\{}\e{start-emph}\cw{\}\{}\e{end-emph}...\cw{\}}] |
1064 | |
1065 | \dd Specifies how to display emphasised text. You can specify |
1066 | multiple fallback options. Works exactly like the |
1067 | \cw{\\cfg\{text-emphasis\}} directive (see |
1068 | \k{output-text-characters}). |
1069 | |
6b4dfd74 |
1070 | \S{output-info-misc} Miscellaneous configuration options |
1071 | |
5b1d0032 |
1072 | \dt \I{\cw{\\cfg\{info-list-suffix\}}}\cw{\\cfg\{info-list-suffix\}\{}\e{text}\cw{\}} |
1073 | |
1074 | \dd Specifies the text to append to the item numbers in a |
1075 | \i{numbered list}. Works exactly like the |
1076 | \cw{\\cfg\{text-list-suffix\}} directive (see |
1077 | \k{output-text-misc}). |
1078 | |
43f61c25 |
1079 | \dt \I{\cw{\\cfg\{info-dir-entry\}}}\cw{\\cfg\{info-dir-entry\}\{}\e{section}\cw{\}\{}\e{short |
1080 | name}\cw{\}\{}\e{long name}\cw{\}}[\cw{\{}\e{keyword}\cw{\}}] |
1081 | |
1082 | \dd Constructs an \i\cw{INFO-DIR-ENTRY} section and places it in the |
1083 | header of the Info file. This mechanism is used to automatically |
1084 | generate the \i{\c{dir} file} at the root of a Unix system's |
1085 | \c{info} collection. |
1086 | |
1087 | \lcont{ |
1088 | |
1089 | The parameters to this directive are: |
1090 | |
1091 | \dt \e{section} |
1092 | |
1093 | \dd Specifies the section of the \c{dir} file in which you want your |
1094 | document referenced. For example, \q{Development}, or \q{Games}, or |
1095 | \q{Miscellaneous}. |
1096 | |
1097 | \dt \e{short name} |
1098 | |
1099 | \dd Specifies a short name for the directory entry, which will |
1100 | appear at the start of the menu line. |
1101 | |
1102 | \dt \e{long name} |
1103 | |
1104 | \dd Specifies a long name for the directory entry, which will appear |
1105 | at the end of the menu line. |
1106 | |
1107 | \dt \e{keyword} |
1108 | |
1109 | \dd This parameter is optional. If it is present, then the directory |
1110 | entry will cause a jump to a particular subsection of your document, |
1111 | rather than starting at the top. The subsection will be the one |
1112 | referred to by the given keyword (see \k{input-sections} for details |
1113 | about assigning keywords to document sections). |
1114 | |
1115 | For example, in a document describing many game programs, the |
1116 | configuration directive |
1117 | |
fc8e7adb |
1118 | \c \cfg{info-dir-entry}{Games}{Chess}{Electronic chess |
1119 | \c game}{chess} |
43f61c25 |
1120 | |
1121 | might produce text in the \c{dir} file looking something like this: |
1122 | |
1123 | \c Games |
1124 | \c * Chess: (mygames)Chapter 3. Electronic chess game |
1125 | |
1126 | if the output file were called \c{mygames.info} and the keyword |
1127 | \c{chess} had been used to define Chapter 3 of the document. |
1128 | |
1129 | } |
0287083a |
1130 | |
6b4dfd74 |
1131 | \S{output-info-defaults} Default settings |
1132 | |
5b1d0032 |
1133 | The \i{default settings} for the \c{info} output format are: |
1134 | |
1135 | \c \cfg{info-filename}{output.info} |
6b4dfd74 |
1136 | \c \cfg{info-max-file-size}{65536} |
5b1d0032 |
1137 | \c |
1138 | \c \cfg{info-width}{70} |
1139 | \c \cfg{info-indent-code}{2} |
1140 | \c \cfg{info-index-width}{40} |
1141 | \c \cfg{info-list-indent}{1} |
1142 | \c \cfg{info-listitem-indent}{3} |
9ec43d08 |
1143 | \c |
5b1d0032 |
1144 | \c \cfg{info-section-suffix}{: } |
5b1d0032 |
1145 | \c \cfg{info-underline}{\u203e}{-} |
6b4dfd74 |
1146 | \c |
1147 | \c \cfg{info-charset}{ASCII} |
5b1d0032 |
1148 | \c \cfg{info-bullet}{\u2022}{-} |
1149 | \c \cfg{info-rule}{\u2500}{-} |
1150 | \c \cfg{info-quotes}{\u2018}{\u2019}{`}{'} |
1151 | \c \cfg{info-emphasis}{_}{_} |
1152 | \c |
1153 | \c \cfg{info-list-suffix}{.} |
5b1d0032 |
1154 | |
1155 | and no \cw{\\cfg\{info-dir-entry\}} directives. |
1156 | |
9ec43d08 |
1157 | \H{output-paper} Paper formats |
1158 | |
1159 | These output formats (currently PostScript and PDF) generate printable |
1160 | manuals. As such, they share a number of configuration directives. |
1161 | |
1162 | \S{output-ps} \i{PostScript} |
0287083a |
1163 | |
1164 | This output format generates a printable manual in PostScript format. |
1165 | |
9ec43d08 |
1166 | There is one configuration option specific to PostScript: |
0287083a |
1167 | |
1168 | \dt \I{\cw{\\cfg\{ps-filename\}}}\cw{\\cfg\{ps-filename\}\{}\e{filename}\cw{\}} |
1169 | |
1170 | \dd Sets the \i{output file name} in which to store the PostScript |
1171 | file. This directive is implicitly generated if you provide a file |
1172 | name parameter after the command-line option \i\c{--ps} (see |
1173 | \k{running-options}). |
1174 | |
1175 | The \i{default settings} for the PostScript output format are: |
1176 | |
1177 | \c \cfg{ps-filename}{output.ps} |
1178 | |
9ec43d08 |
1179 | \S{output-pdf} \i{PDF} |
0287083a |
1180 | |
1181 | This output format generates a printable manual in PDF format. This |
1182 | should look exactly identical to the PostScript output (see |
1183 | \k{output-ps}), but also uses some PDF interactive features to |
1184 | provide an outline of all the document's sections and clickable |
1185 | cross-references between sections. |
1186 | |
9ec43d08 |
1187 | There is one configuration option specific to PDF: |
0287083a |
1188 | |
1189 | \dt \I{\cw{\\cfg\{pdf-filename\}}}\cw{\\cfg\{pdf-filename\}\{}\e{filename}\cw{\}} |
1190 | |
1191 | \dd Sets the \i{output file name} in which to store the PDF file. |
1192 | This directive is implicitly generated if you provide a file name |
1193 | parameter after the command-line option \i\c{--pdf} (see |
1194 | \k{running-options}). |
1195 | |
1196 | The \i{default settings} for the PDF output format are: |
1197 | |
1198 | \c \cfg{pdf-filename}{output.pdf} |
9ec43d08 |
1199 | |
1200 | \S{output-paper-dimensions} Configuring layout and \i{measurements} |
1201 | |
1202 | All measurements are in PostScript \i{points} (72 points to the inch). |
1203 | |
1204 | \S2{output-paper-pagesize} Page properties |
1205 | |
1206 | \dt \I{\cw{\\cfg\{paper-page-width\}}}\cw{\\cfg\{paper-page-width\}\{}\e{points}\cw{\}} |
1207 | |
1208 | \dt \I{\cw{\\cfg\{paper-page-height\}}}\cw{\\cfg\{paper-page-height\}\{}\e{points}\cw{\}} |
1209 | |
1210 | \dd Specify the absolute limits of the paper. |
1211 | |
1212 | \dt \I{\cw{\\cfg\{paper-left-margin\}}}\cw{\\cfg\{paper-left-margin\}\{}\e{points}\cw{\}} |
1213 | |
1214 | \dt \I{\cw{\\cfg\{paper-top-margin\}}}\cw{\\cfg\{paper-top-margin\}\{}\e{points}\cw{\}} |
1215 | |
1216 | \dt \I{\cw{\\cfg\{paper-right-margin\}}}\cw{\\cfg\{paper-right-margin\}\{}\e{points}\cw{\}} |
1217 | |
1218 | \dt \I{\cw{\\cfg\{paper-bottom-margin\}}}\cw{\\cfg\{paper-bottom-margin\}\{}\e{points}\cw{\}} |
1219 | |
1220 | \dd Specify the margins. Most text appears within these margins, |
1221 | except: |
1222 | |
1223 | \lcont{ |
1224 | |
1225 | \b Section numbers, which appear in the left margin. |
1226 | |
1227 | \b The footer (containing page numbers), which appears in the bottom |
1228 | margin. |
1229 | |
1230 | } |
1231 | |
1232 | \S2{output-paper-line} Vertical spacing |
1233 | |
1234 | \dt \I{\cw{\\cfg\{paper-base-leading\}}}\cw{\\cfg\{paper-base-leading\}\{}\e{points}\cw{\}} |
1235 | |
1236 | \dd Specifies the amount of space between lines of text within a |
1237 | paragraph. (So, if the font size is 12pt and there is 2pt of leading, |
1238 | there will be 14pt between successive baselines.) |
1239 | |
1240 | \dt \I{\cw{\\cfg\{paper-base-para-spacing\}}}\cw{\\cfg\{paper-base-para-spacing\}\{}\e{points}\cw{\}} |
1241 | |
1242 | \dd Specifies the amount of vertical space between paragraphs. (The |
1243 | vertical space between paragraphs does \e{not} include |
1244 | \c{paper-base-leading}.) |
1245 | |
1246 | \S2{output-paper-indentation} Indentation |
1247 | |
1248 | \dt \I{\cw{\\cfg\{paper-list-indent\}}}\cw{\\cfg\{paper-list-indent\}\{}\e{points}\cw{\}} |
1249 | |
1250 | \dd Specifies the indentation of the bullet or number in a |
1251 | \I{bulletted list, indentation}bulletted or \I{numbered list, |
1252 | indentation}numbers \I{list, indentation}list, similarly to |
1253 | \cw{\\cfg\{text-list-indent\}} (see \k{output-text-dimensions}). |
1254 | |
1255 | \dt \I{\cw{\\cfg\{paper-listitem-indent\}}}\cw{\\cfg\{paper-listitem-indent\}\{}\e{points}\cw{\}} |
1256 | |
1257 | \dd Specifies the \e{extra} indentation for the body of a list item, |
1258 | over and above the amount configured in \cw{\\cfg\{paper-list-indent\}}. |
1259 | |
1260 | \# FIXME: doesn't actually work, AFAICT. |
1261 | |
1262 | \dt \I{\cw{\\cfg\{paper-quote-indent\}}}\cw{\\cfg\{paper-quote-indent\}\{}\e{points}\cw{\}} |
1263 | |
1264 | \dd Specifies the amount of indentation for a level of quoting. Used |
1265 | for \cw{\\quote} (see \k{input-quote}) and code quotes with \cw{\\c} |
1266 | (see \k{input-code}). |
1267 | |
1268 | \S2{output-paper-headings} Headings |
1269 | |
1270 | \dt \I{\cw{\\cfg\{paper-chapter-top-space\}}}\cw{\\cfg\{paper-chapter-top-space\}\{}\e{points}\cw{\}} |
1271 | |
1272 | \dd Specifies the space between the top margin \#{XXX check} and the |
1273 | top of the chapter heading. (Each chapter begins on a new page.) |
1274 | |
1275 | \# FIXME: the first page of the Index gets mangled if this is |
1276 | set to zero. |
1277 | |
1278 | \# FIXME: exact relationship to top-margin? |
1279 | |
1280 | \dt \I{\cw{\\cfg\{paper-chapter-underline-thickness\}}}\cw{\\cfg\{paper-chapter-underline-thickness\}\{}\e{points}\cw{\}} |
1281 | |
1282 | \dd Specifies the vertical thickness of the black rule under chapter |
1283 | headings. |
1284 | |
1285 | \dt \I{\cw{\\cfg\{paper-chapter-underline-depth\}}}\cw{\\cfg\{paper-chapter-underline-depth\}\{}\e{points}\cw{\}} |
1286 | |
1287 | \dd Specifies the distance between the base of the chapter heading and |
1288 | the \e{base} of the underlying rule. |
1289 | |
1290 | \dt \I{\cw{\\cfg\{paper-sect-num-left-space\}}}\cw{\\cfg\{paper-sect-num-left-space\}\{}\e{points}\cw{\}} |
1291 | |
1292 | \dd Specifies the distance between the left margin and the \e{right} |
1293 | of section numbers (which are in the left margin). |
1294 | |
1295 | \S2{output-paper-index} Contents and index |
1296 | |
1297 | \dt \I{\cw{\\cfg\{paper-contents-index-step\}}}\cw{\\cfg\{paper-contents-index-step\}\{}\e{points}\cw{\}} |
1298 | |
1299 | \dt \I{\cw{\\cfg\{paper-contents-margin\}}}\cw{\\cfg\{paper-contents-margin\}\{}\e{points}\cw{\}} |
1300 | |
1301 | \# FIXME: I do not know what dees one does. (I couldn't get either of |
1302 | them to do anything obvious, although the source indicates they should |
1303 | do something.) |
1304 | |
1305 | \dt \I{\cw{\\cfg\{paper-leader-separation\}}}\cw{\\cfg\{paper-leader-separation\}\{}\e{points}\cw{\}} |
1306 | |
1307 | \dd Specifies the horizontal spacing between dots in \i\e{leaders} |
1308 | (the dotted lines that appear between section headings and page |
1309 | numbers in the table of contents). |
1310 | |
1311 | \dt \I{\cw{\\cfg\{paper-footer-distance\}}}\cw{\\cfg\{paper-footer-distance\}\{}\e{points}\cw{\}} |
1312 | |
1313 | \dd Specifies the distance between the bottom margin and the \e{base} |
1314 | of the footer (which contains page numbers). |
1315 | |
1316 | \dt \I{\cw{\\cfg\{paper-index-columns\}}}\cw{\\cfg\{paper-index-columns\}\{}\e{columns}\cw{\}} |
1317 | |
1318 | \dd Specifies the number of columns the index should be divided into. |
1319 | |
1320 | \# FIXME: with this set to 1, the right-alignment of some index entry |
1321 | page numbers in the Halibut manual is decidedly wonky. |
1322 | |
1323 | \dt \I{\cw{\\cfg\{paper-index-gutter\}}}\cw{\\cfg\{paper-index-gutter\}\{}\e{points}\cw{\}} |
1324 | |
1325 | \dd Specifies the amount of \I{gutter} horizontal space between index |
1326 | columns. |
1327 | |
1328 | \dt \I{\cw{\\cfg\{paper-index-minsep\}}}\cw{\\cfg\{paper-index-minsep\}\{}\e{points}\cw{\}} |
1329 | |
1330 | \dd Specifies the minimum allowable horizontal space between an index |
1331 | entry and its page number. If the gap is smaller, the page number is |
1332 | moved to the next line. |
1333 | |
1334 | \S2{output-paper-fonts} Fonts |
1335 | |
1336 | \dt \I{\cw{\\cfg\{paper-base-font-size\}}}\cw{\\cfg\{paper-base-font-size\}\{}\e{points}\cw{\}} |
1337 | |
1338 | \dd Specifies the font size of body text. |
1339 | |
1340 | \# FIXME: actually, this doesn't appear to do anything at all - most |
1341 | font sizes are still hardcoded. |
1342 | |
1343 | \dt \I{\cw{\\cfg\{paper-pagenum-font-size\}}}\cw{\\cfg\{paper-pagenum-font-size\}\{}\e{points}\cw{\}} |
1344 | |
1345 | \dd Specifies the font size to use for page numbers. |
1346 | |
1347 | \S2{output-paper-misc} Miscellaneous |
1348 | |
1349 | \dt \I{\cw{\\cfg\{paper-rule-thickness\}}}\cw{\\cfg\{paper-rule-thickness\}\{}\e{points}\cw{\}} |
1350 | |
1351 | \dd Specifies the vertical thickness of the rule produced by the |
1352 | \cw{\\rule} command (see \k{input-rule}). (Note that no extra space is |
1353 | reserved for thicker rules.) |
1354 | |
1355 | \S{output-paper-characters} Configuring the characters used |
1356 | |
1357 | \dt \I{\cw{\\cfg\{paper-bullet\}}}\cw{\\cfg\{paper-bullet\}\{}\e{text}\cw{\}}[\cw{\{}\e{text}\cw{\}}...] |
1358 | |
1359 | \dd Specifies the text to use as the \i{bullet} in bulletted lists. |
1360 | You can specify multiple fallback options. Works exactly like the |
1361 | \cw{\\cfg\{text-bullet\}} directive (see |
1362 | \k{output-text-characters}). |
1363 | |
1364 | \dt \I{\cw{\\cfg\{paper-quotes\}}}\cw{\\cfg\{paper-quotes\}\{}\e{open-quote}\cw{\}\{}\e{close-quote}\cw{\}}[\cw{\{}\e{open-quote}\cw{\}\{}\e{close-quote}...\cw{\}}] |
1365 | |
1366 | \dd Specifies the quotation marks to use, overriding any |
1367 | \cw{\\cfg\{quotes\}} directive. You can specify multiple |
1368 | fallback options. Works exactly like the \cw{\\cfg\{text-quotes\}} |
1369 | directive (see \k{output-text-characters}). |
1370 | |
1371 | \S{output-paper-defaults} Default settings for paper formats |
1372 | |
1373 | The default page size corresponds to 210\_\u00D7{x}\_297\_mm, i.e., |
1374 | \i{A4 paper}. |
1375 | |
1376 | \c \cfg{paper-page-width}{595} |
1377 | \c \cfg{paper-page-height}{841} |
1378 | \c |
1379 | \c \cfg{paper-left-margin}{72} |
1380 | \c \cfg{paper-top-margin}{72} |
1381 | \c \cfg{paper-right-margin}{72} |
1382 | \c \cfg{paper-bottom-margin}{108} |
1383 | \c |
1384 | \c \cfg{paper-base-leading}{1} |
1385 | \c \cfg{paper-base-para-spacing}{10} |
1386 | \c |
1387 | \c \cfg{paper-list-indent}{6} |
1388 | \c \cfg{paper-listitem-indent}{18} |
1389 | \c \cfg{paper-quote-indent}{18} |
1390 | \c |
1391 | \c \cfg{paper-chapter-top-space}{72} |
1392 | \c \cfg{paper-chapter-underline-thickness}{3} |
1393 | \c \cfg{paper-chapter-underline-depth}{14} |
1394 | \c \cfg{paper-sect-num-left-space}{12} |
1395 | \c |
1396 | \c \cfg{paper-contents-index-step}{24} |
1397 | \c \cfg{paper-contents-margin}{84} |
1398 | \c \cfg{paper-leader-separation}{12} |
1399 | \c \cfg{paper-footer-distance}{32} |
1400 | \c \cfg{paper-index-columns}{2} |
1401 | \c \cfg{paper-index-gutter}{36} |
1402 | \c \cfg{paper-index-minsep}{18} |
1403 | \c |
1404 | \c \cfg{paper-base-font-size}{12} |
1405 | \c \cfg{paper-pagenum-font-size}{12} |
1406 | \c |
1407 | \c \cfg{paper-rule-thickness}{1} |
1408 | \c |
1409 | \c \cfg{paper-bullet}{\u2022}{-} |
1410 | \c \cfg{paper-quotes}{\u2018}{\u2019}{'}{'} |