X-Git-Url: https://git.distorted.org.uk/~mdw/secnet/blobdiff_plain/08f344d3bdffe4bb83b47b5e2d53758ce231ebc4..4f5e39ec:/example.conf

diff --git a/example.conf b/example.conf
index 0d7a546..634467c 100644
--- a/example.conf
+++ b/example.conf
@@ -1,7 +1,22 @@
 # secnet example configuration file
 
 # Log facility
-log logfile("secnet","local2"); # Not yet implemented, goes to stderr
+log logfile {
+	filename "/var/log/secnet";
+	class "info","notice","warning","error","security","fatal";
+	# There are some useful message classes that could replace
+	# this list:
+	#  'default' -> warning,error,security,fatal
+	#  'verbose' -> info,notice,default
+	#  'quiet'   -> fatal
+};
+
+# Alternatively you could log to syslog:
+# log syslog {
+# 	ident "secnet";
+# 	facility "local0";
+# };
+
 
 # Systemwide configuration (all other configuration is per-site):
 # log		a log facility for program messages
@@ -46,19 +61,23 @@ system {
 # wait-time             wait between unsuccessful key setup attempts, in ms
 # renegotiate-time      set up a new key if we see any traffic after this time
 
+setup-retries 10;
+setup-timeout 2000;
+
 # Use the universal TUN/TAP driver to get packets to and from the kernel
-#  (use tun-old if you are not on Linux-2.4)
 netlink tun {
 	name "netlink-tun"; # Printed in log messages from this netlink
 #	interface "tun0"; # You may set your own interface name if you wish;
 		# if you don't one will be chosen for you.
+#	device "/dev/net/tun";
 
-	# local networks served by this netlink device
-	# incoming tunneled packets for other networks will be discarded
-	networks "192.168.x.x/24", "192.168.x.x/24", "172.x.x.x/24";
 	local-address "192.168.x.x"; # IP address of host's tunnel interface
 	secnet-address "192.168.x.x"; # IP address of this secnet
 
+	# Tunnels are only allowed to use these networks; attempts to
+	# claim IP addresses in any other ranges is a configuration error
+	remote-networks "192.168.0.0/16", "172.16.0.0/12", "10.0.0.0/8";
+
 	# MTU of the tunnel interface. Should be kept under the path-MTU
 	# (by at least 60 bytes) between this secnet and its peers for
 	# optimum performance.
@@ -92,7 +111,7 @@ netlink tun {
 # host and port for your site end up on this machine at the port you
 # specify here.
 comm udp {
-	port xxxx;
+	port 410;
 	buffer sysbuffer(4096);
 };
 
@@ -111,6 +130,8 @@ log-events "setup-init","setup-timeout","activate-key","timeout-key","errors",
 # that it's non-blocking. XXX 'yes' isn't implemented yet.
 random randomfile("/dev/urandom",no);
 
+# If you're using the make-secnet-sites script then your local-name
+# will be of the form "vpnname/location/site" eg. "sgo/greenend/sinister"
 local-name "your-site-name";
 local-key rsa-private("/etc/secnet/key");
 
@@ -127,10 +148,10 @@ include /etc/secnet/sites.conf
 # a newer version. MAKE SURE YOU GET AN AUTHENTIC COPY OF THE FILE - it
 # contains public keys for all sites.
 
-sites
-	site(vpn-data/example/location1/site1),
-	site(vpn-data/example/location2/site1),
-	site(vpn-data/example/location2/site2);
+sites map(site,
+	vpn-data/example/location1/site1,
+	vpn-data/example/location2/site1,
+	vpn-data/example/location2/site2);
 
 # If you want to communicate with all the VPN sites, you can use something
 # like the following instead: