Import release 0.1.3

[secnet] / example.conf

# secnet example configuration file

# Log facility
log logfile("secnet","local2"); # Not yet implemented, goes to stderr

# Systemwide configuration (all other configuration is per-site):
# log		a log facility for program messages
# userid	who we try to run as after setup
# pidfile
system {
	userid "secnet";
	pidfile "/var/run/secnet.pid";
};

# Parameters for each remote site (arguments to the site() closure):
#  things we configure locally
# buffer                buffer for constructing/sending/receiving packets
# netlink		user/kernel netlink device for this tunnel
# comm			UDP communication
# resolver		resolver to use for name lookups
# log			a log destination for this connection
# log-events		string list: which events we log
# random                a source of randomness

#  our local configuration visible to the outside world
# local-name		string: how we identify ourselves to them
# local-key		our own private RSA key
# local-port		port number we listen on

#  their configuration visible to us
# name			string: how they identify themselves
# address		string: use with resolver to find their IP address
# networks		string list: their networks for us
# key			the remote site's RSA public key
# port			port we send to to contact remote site

#  things both ends must agree on
# transform             routine for bulk encryption
# dh			Diffie-Hellman parameters
# hash			secure hash function

#  things both ends ought to agree on, but don't have to
# key-lifetime          max session key lifetime, in milliseconds
# setup-retries         max retransmits of a key setup packet
# setup-timeout         wait between retransmits of key setup packets, in ms
# wait-time             wait between unsuccessful key setup attempts, in ms
# renegotiate-time      set up a new key if we see any traffic after this time

# Use the universal TUN/TAP driver to get packets to and from the kernel
#  (use tun-old if you are not on Linux-2.4)
netlink tun {
	name "netlink-tun"; # Printed in log messages from this netlink
#	interface "tun0"; # You may set your own interface name if you wish;
		# if you don't one will be chosen for you.

	# local networks served by this netlink device
	# incoming tunneled packets for other networks will be discarded
	networks "192.168.x.x/24", "192.168.x.x/24", "172.x.x.x/24";
	local-address "192.168.x.x"; # IP address of host's tunnel interface
	secnet-address "192.168.x.x"; # IP address of this secnet

	# MTU of the tunnel interface. Should be kept under the path-MTU
	# (by at least 60 bytes) between this secnet and its peers for
	# optimum performance.
	mtu 1400;

	# This buffer is used to pass incoming packets onto the 'site'
	# module. It should be at least as big as the MTU plus 60 bytes.
	# Buffers can sometimes be shared between netlink devices - see
	# full documentation for more details. (XXX TODO)
	buffer sysbuffer(2048);
};

# Alternatively (or additionally, if you like) use userv-ipif to get
# packets to and from the kernel.
#netlink userv-ipif {
#	name "netlink-userv-ipif";
#	# userv-path "/usr/bin/userv";
#	# service-user "root";
#	# service-name "ipif";
#	networks "whatever";
#	local-address "whatever";
#	secnet-address "whatever";
#	mtu 1400;
#	buffer sysbuffer(2048);
#};	

# This defines the port that this instance of secnet will listen on, and
# originate packets on. It does not _have_ to correspond to the advertised
# port for your site: you may be doing network address translation, for
# example. You need to arrange that any UDP packets sent to the advertised
# host and port for your site end up on this machine at the port you
# specify here.
comm udp {
	port xxxx;
	buffer sysbuffer(4096);
};

# The resolver is used to look up IP addresses from the DNS names provided
# in the sites file. You may specify an alternative resolv.conf for
# ADNS here if you wish.
resolver adns {
#	config=readfile("/etc/secnet/adns.conf");
};

# log is defined earlier - we share it with the system
log-events "setup-init","setup-timeout","activate-key","timeout-key","errors",
	"security";

# A source of random bits for nonces and session keys. The 'no' specifies
# that it's non-blocking. XXX 'yes' isn't implemented yet.
random randomfile("/dev/urandom",no);

local-name "your-site-name";
local-key rsa-private("/etc/secnet/key");

# On dodgy links you may want to specify a higher maximum sequence number skew
transform serpent256-cbc {
	max-sequence-skew 10;
};

include /etc/secnet/sites

# Here you must list all the VPN sites that you wish to communicate with.
# The /etc/secnet/sites file contains information on all reachable sites;
# if the site you want to communicate with isn't listed, you should get
# a newer version. MAKE SURE YOU GET AN AUTHENTIC COPY OF THE FILE - it
# contains public keys for all sites.

sites
	site(example-vpn/some-site),
	site(example-vpn/some-other-site),
	site(example-vpn/a-third-site);

# If you want to communicate with all the VPN sites, you can use something
# like the following instead:

# sites map(site,makelist(example-vpn));