runlisp.c: Remove long-removed `-C' option from usage synopsis.

[runlisp] / README.org

# -*-org-*-
#+TITLE: ~runlisp~ -- run scripts written in Common Lisp
#+AUTHOR: Mark Wooding
#+LaTeX_CLASS: strayman
#+LaTeX_HEADER: \usepackage{tikz, gnuplot-lua-tikz}
#+LaTeX_HEADER: \DeclareUnicodeCharacter{200B}{}
#+EXPORT_FILE_NAME: doc/README.pdf

~runlisp~ is a small C program intended to be run from a script ~#!~
line.  It selects and invokes a Common Lisp implementation, so as to run
the script.  In this sense, ~runlisp~ is a partial replacement for
~cl-launch~.

Currently, the following Lisp implementations are supported:

  + Armed Bear Common Lisp (~abcl~),
  + Clozure Common Lisp (~ccl~),
  + GNU CLisp (~clisp~),
  + Carnegie--Mellon Univerity Common Lisp (~cmucl~),
  + Embeddable Common Lisp (~ecl~), and
  + Steel Bank Common Lisp (~sbcl~).

Adding more Lisps is simply a matter of writing the necessary runes in a
configuration file.  Of course, there's a benefit to having a collection
of high-quality configuration runes curated centrally, so I'm happy to
accept submissions in support of any free[fn:free] Lisp implementations.

[fn:free] Here I mean free as in freedom.


* Writing scripts in Common Lisp

** Basic use

The obvious way to use ~runlisp~ is in a shebang (~#!~) line at the top
of a script.  For example:

: #! /usr/local/bin/runlisp
: (format t "Hello from Lisp!~%")

Script interpreters must be named with absolute pathnames in shebang
lines; if your ~runlisp~ is installed somewhere other than
~/usr/local/bin/~ then you'll need to write something different.
Alternatively, a common hack involves abusing the ~env~ program as a
script interpreter, because it will do a path search for the program
it's supposed to run:

: #! /usr/bin/env runlisp
: (format t "Hello from Lisp!~%")

** Specific Lisps

Lisp implementations are not created equal -- for good reason.  If your
script depends on the features of some particular Lisp implementation,
then you can tell ~runlisp~ that it must use that implementation to run
your script using the ~-L~ option; for example:

: #! /usr/local/bin/runlisp -Lsbcl
: (format t "Hello from Steel Bank Common Lisp!~%")

If your script supports several Lisps, but not all, then list them all
in the ~-L~ option, separated by commas:

: #! /usr/local/bin/runlisp -Lsbcl,ccl
: (format t #.(concatenate 'string
:                          "Hello from "
:                          #+sbcl "Steel Bank"
:                          #+ccl "Clozure"
:                          #-(or sbcl ccl) "an unexpected"
:                          " Common Lisp!~%"))

It is not an error to include the name of an unrecognized Lisp system in
the ~-L~ option: such names are simply ignored.  This allows a script to
declare support for unusual or locally installed Lisp systems without
compromising its portability to sites where such systems are unknown, or
which are still running older versions of ~runlisp~ which haven't been
updated with the necessary configuration for those systems.

** Embedded options

If your script requires features of particular Lisp implementations
/and/ you don't want to hardcode an absolute path to ~runlisp~, then you
have a problem.  Most Unix-like operating systems will parse a shebang
line into the initial ~#!~, the pathname to the interpreter program,
and a /single/ optional argument: any further spaces don't separate
further arguments: they just get included in the first argument, all the
way up to the end of the line.  So

: #! /usr/bin/env runlisp -Lsbcl
: (format t "Hello from Steel Bank Common Lisp!~%")

won't work: it'll just try to run a program named ~runlisp -Lsbcl~, with
a space in the middle of its name, and that's quite unlikely to exist.

To help with this situation, ~runlisp~ reads /embedded options/ from
your script.  Specifically, if the script's second line contains the
token ~@RUNLISP:~ then ~runlisp~ will parse additional options from this
line.  So the following will work properly.

: #! /usr/bin/env runlisp
: ;;; @RUNLISP: -Lsbcl
: (format t "Hello from Steel Bank Common Lisp!~%")

Embedded options are split at spaces properly.  Spaces can be escaped or
quoted in (an approximation to) the usual shell manner, should that be
necessary.  See the manpage for the gory details.

** Common environment

~runlisp~ puts some effort into making sure that Lisp scripts get the
same view of the world regardless of which implementation is running
them.

For example:

  + The ~asdf~ and ~uiop~ systems are loaded and ready for use.

  + The script's command-line arguments are available in
    ~uiop:*command-line-arguments*~.  Its name can be found by calling
    ~(uiop:argv0)~ -- though it's probably also in ~*load-pathname*~.

  + The prevailing Unix standard input, output, and error files are
    available through the Lisp ~*standard-input*~, ~*standard-output*~,
    and ~*error-ouptut*~ streams, respectively.  (This is, alas, not a
    foregone conclusion.)

  + The keyword ~:runlisp-script~ is added to the ~*features*~ list.
    This means that your script can tell whether it's being run from the
    command line, and should therefore do its thing and then quit; or
    merely being loaded into a Lisp system, e.g., for debugging or
    development, and should sit still and not do anything until it's
    asked.

See the manual for the complete list of guarantees.


* Invoking Lisp implementations

** Basic use

A secondary use of ~runlisp~ is in build scripts for Lisp programs.  If
the entire project is just a Lisp library, then it's possibly acceptable
to just provide an ASDF system definition and expect users to type
~(asdf:load-system "mumble")~ to use it.  If it's a program, or there
are things other than Lisp which ASDF can't or shouldn't handle --
significant pieces in other languages, or a Lisp executable image to
make and install -- then it seems sensible to make the project's main
build system be something language-agnostic, say Unix ~make~, and
arrange for that to invoke ASDF at the appropriate time.

But how should that be arranged?  It's relatively easy for a project'
Lisp code to support multiple Lisp implementation; but each
implementation wants different runes for evaluating Lisp forms from the
command line, and some of them don't provide an ideal environment for
integrating into a build system.  So ~runlisp~ provides a simple common
command-line interface for evaluating Lisp forms.  For example:

: $ runlisp -e '(format t "~A~%" (+ 1 2))'
: 3

If your build script needs to get information out of Lisp, then wrapping
~format~, or even ~princ~, around forms is annoying; so ~runlisp~ has a
~-p~ option which prints the values of the forms it evaluates.

: $ runlisp -e '(+ 1 2)'
: 3

If a form produces multiple values, then ~-p~ will print all of them, as
if by ~princ~, separated by spaces, on a single line:

: $ runlisp -p '(floor 5 2)'
: 2 1

There's also a ~-d~ option, which does the same thing as ~-p~, only it
prints values as if by ~prin1~.  For example,

: $ runlisp -p '"Hello, world!"'
: Hello, world!
: runlisp -d '"Hello, world!"'
: "Hello, world!"

In addition to evaluating forms with ~-e~, and printing their values
with ~-d~ and ~-p~, you can also load a file of Lisp code using ~-l~.

When ~runlisp~ is acting on ~-e~, ~-p~, and/or ~-l~ options, it's said
to be running in /eval/ mode, rather than its usual /script/ mode.  In
eval mode, it /doesn't/ set ~:runlisp-script~ in ~*features*~.

You can still insist that ~runlisp~ use a particular Lisp
implementation, or one of a subset of implementations, using the ~-L~
option mentioned above.

: $ runlisp -Lsbcl -p "(lisp-implementation-type)"
: "SBCL"

** Command-line processing

When scripting a Lisp -- as opposed to running a Lisp script -- it's not
necessarily the case that your script knows in advance exactly what it
needs to ask Lisp to do.  For example, it might need to tell Lisp to
install a program in a particular directory, determined by Autoconf.
While it's certainly /possible/ to quote such data and splice them into
Lisp forms, it's more convenient to pass them in separately.  So
~runlisp~ ensures that the command-line options are available to Lisp
forms via ~uiop:*command-line-arguments*~, as they are to a Lisp script.

: $ runlisp -p "uiop:*command-line-arguments*" one two three
: ("one" "two" "three")

When running Lisp forms like this, ~(uiop:argv0)~ isn't very
meaningful.  (Currently, it reveals the name of the script which
~runlisp~ uses to implement this feature.)


* Configuring =runlisp=

** Where =runlisp= looks for configuration

You can influence which Lisp implementations are chosen by ~runlisp~ by
writing configuration files, and/or setting environment variables.

The ~runlisp~ program looks for configuration in a number of places.

  + There's a system-global directory ~SYSCONFDIR/runlisp/runlisp.d/~.
    All of the files in this directory named ~SOMETHING.conf~ are read,
    in increasing lexicographical order by name.  The package comes with
    a file ~0base.conf~ intended to be read first, so that it can be
    overridden if necessar.  This sets up basic definitions, and defines
    the necessary runes for those Lisp implementations which are
    supported `out of the box'.  New Lisp packages might come with
    additional files to drop into this directory.

  + There's a system-global file ~SYSCONFDIR/runlisp/runlisp.conf~ which
    is intended to be edited by the system administrator to account for
    any local quirks.  This is read /after/ the directory, which is
    intended to be used by distribution packages, so that the system
    administrator can override them.

  + Users can create files ~$HOME/.runlisp.conf~ and/or
    ~$HOME/.config/runlisp.conf~[fn:xdg-config] in their home
    directories to add support for privately installed Lisp systems, or
    to override settings made by earlier configuration files.

But configuration files generally look like =.ini=-style files.  A line
beginning with a semicolon ~;~ is a comment and is ignored.  Most lines
are assignments, which look like
#+BEGIN_QUOTE
/name/ ~=~ /value/
#+END_QUOTE
and assignments are split into sections by section headers in square
brackets:
#+BEGIN_QUOTE
~[~\relax{}/section/\relax{}~]~
#+END_QUOTE
The details of the configuration syntax are complicated, and explained
in the *runlisp.conf* manpage.

Configuration options can also be set on the command line, though the
effects are subtly different.  Again, see the manual pages for details.

[fn:xdg-config] More properly, in ~$XDG_CONFIG_HOME/runlisp.conf~, if
you set that.


** Deciding which Lisp implementation to use

The ~prefer~ option specifies a /preference list/ of Lisp
implementations.  The value is a list of Lisp implementation names, as
you'd give to ~-L~, separated by commas and/or spaces.  If the
environment variable ~RUNLISP_PREFER~ is set, then this overrides any
value found in the configuration files.  So your ~$HOME/.runlisp.conf~
file might look like this:

: ;;; -*-conf-*-
:
: prefer = sbcl, clisp

When deciding which Lisp implementation to use, ~runlisp~ works as
follows.  It builds a list of /acceptable/ Lisp implementations from the
~-L~ command-line option, and a list of /preferred/ Lisp implementations
from the ~prefer~ configuration option (or environment variable).  If
there aren't any ~-L~ options, then it assumes that /all/ Lisp
implementations are acceptable; if no ~prefer~ option is set then it
assumes that /no/ Lisp implementations are preferred.  It then works
through the preferred list in order: if it finds an implementation which
is installed and acceptable, then it uses that one.  If that doesn't
work, then it works through the acceptable implementations that it
hasn't tried yet, in order, and if it finds one of those that's
installed, then it runs that one.  Otherwise it reports an error and
gives up.


** Supporting new Lisp implementations

~runlisp~ tries hard to make adding support for a new Lisp as painless
as possible.  An awkward Lisp will of course cause trouble, but
~runlisp~ itself is easy.

As a simple example, let's add support for the 32-bit version of
Clozure\nbsp{}CL.  The source code for Clozure\nbsp{}CL easily builds
both 32- and 64-bit binaries in either 32- or 64-bit userlands, and one
might reasonably want to use the 32-bit CCL for some reason.  The
following configuration stanza is sufficient

: [ccl32]
: @PARENTS = ccl
: command = ${@ENV:CCL32?ccl32}

  + The first line heads a configuration section, providing the name
    which will be used for this Lisp implementation, e.g., in ~-L~
    options or ~prefer~ lists.

  + The second line tells ~runlisp~ that configuration settings not
    found in this section should be looked up in the ~ccl~ section
    instead.

  + The third line defines the command to be used to invoke the Lisp
    system.  It tries to find an environment variable named ~CCL32~,
    falling back to looking up ~ccl32~ in the path otherwise.

And, err..., that's it.  The ~@PARENTS~ setting uses the detailed
command-line runes for ~ccl~, so they don't need to be written out
again.

That was rather anticlimactic, because all of the work got done
somewhere else.  So let's look at a complete example: Steel Bank Common
Lisp.  (SBCL's command-line interface is well thought-out, so this is an
ideal opportunity to explain how ~runlisp~ configuration works, without
getting bogged down in the details of fighting less amenable Lisps.)

The provided ~0base.conf~ file defines SBCL as follows.

: [sbcl]
: 
: command = ${@ENV:SBCL?sbcl}
: image-file = ${@NAME}+asdf.core
: 
: run-script =
:         ${command} --noinform
:                 $?@IMAGE{--core "${image-path}" --eval "${image-restore}" |
:                          --eval "${run-script-prelude}"}
:                 --script "${@SCRIPT}"
: 
: dump-image =
:         ${command} --noinform --no-userinit --no-sysinit --disable-debugger
:                 --eval "${dump-image-prelude}"
:                 --eval "(sb-ext:save-lisp-and-die \"${@IMAGENEW|q}\")"

Let's take this in slightly larger pieces.

  + We see the ~[sbcl]~ section heading, and the ~command~ setting
    again.  These should now be unsurprising.

  + There's no ~@PARENTS~ setting, so by default the ~sbcl~ section
    inherits settings from the ~@COMMON~ section, defined in
    ~0base.conf~.  We shall use a number of definitions from this
    section.

  + The ~image-file~ gives the name of the custom image file to look for
    when trying to start SBCL, but not the directory.  (The directory is
    named by the ~image-dir~ configuration setting.)  The image file
    will be named ~sbcl+asdf.core~, but this isn't what's written.
    Instead, it uses ~${@NAME}~, which is replaced by the name of the
    section being processed.  When we're running SBCL, this does the
    same thing; but if someone wants to configure a new ~foo~ Lisp and
    set ~@PARENTS~ to ~sbcl~, then the image file for ~foo~ will be
    named ~foo+asdf.core~ by default.  You needn't take such care when
    configuring Lisp implementations for your own purposes, but it's
    important for configurations which will be widely used.

  + The ~run-script~ setting explains how to get SBCL to run a script.
    This string is broken into words at (unquoted) spaces.

    The syntax ~$?VAR{CONSEQ|ALT}~ means: if a configuration setting
    ~VAR~ is defined, then expand to ~CONSEQ~; otherwise, expand to
    ~ALT~.  In this case, if the magic setting ~@IMAGE~ is defined, then
    we add the tokens ~--core "${image-path}" --eval "${image-restore}"~
    to the SBCL command line; otherwise, we add ~--eval
    "${run-script-prelude}"~.  The ~@IMAGE~ setting is defined by
    ~runlisp~ only if (a)\nbsp{}a custom image was found in the correct
    place, and (b)\nbsp{}use of custom images isn't disabled on its
    command line.

    The ~${image-path}~ token expands to the full pathname to the custom
    image file; ~image-restore~ is a predefined Lisp expression to be
    run when starting from a dumped image (e.g., to get ASDF to refresh
    its idea of which systems are available).

    The ~run-script-prelude~ is another (somewhat involved) Lisp
    expression which sets up a Lisp environment suitable for running
    scripts -- e.g., by arranging to ignore ~#!~ lines, and pushing
    ~:runlisp-script~ onto ~*features*~.

    Finally, regardless of whether we're using a custom or vanilla
    image, we add the tokens ~--script "${@SCRIPT}"~ to the command
    line.  The ~${@SCRIPT}~ token is replaced by the actual script
    pathname.  ~runlisp~ then appends further arguments from its own
    command line and runs the command.  (For most Lisps, ~uiop~ needs a
    ~--~ marker before the user arguments, but not for SBCL.)

  + Finally, ~dump-image~ defines a command line for dumping a custom
    images.  The ~dump-image-prelude~ setting is a Lisp expression for
    setting up a Lisp so that it will be in a useful state when dumped:
    it's very similar to ~run-script-prelude~, and is built out of many
    of the same pieces.

    The thing we haven't seen before is ~${@IMAGENEW|q}~.  The
    ~@IMAGENEW~ setting is defined by the ~dump-runlisp-image~ program
    to name the file in which the new image should be
    saved.[fn:image-rename]  The ~|q~ `filter' is new: it means that the
    filename should be escaped suitable for inclusion in a Lisp quoted
    string, by prefixing each ~\~ or ~"~ with a ~\~.

That's more or less all there is.  SBCL is a particularly simple
example, but mostly because other Lisp implementations require fancier
stunts /at the Lisp level/.  The ~runlisp~-level configuration isn't any
more complicated than SBCL.

[fn:image-rename] ~dump-runlisp-image~ wants to avoid clobbering an
existing image with a half-finished one, so it tries to arrange for the
new image to be written to a different file, and then renames it once
it's been created successfully.)


* What's wrong with =cl-launch=?

The short version is that ~cl-launch~ is slow and inconvenient.
~cl-launch~ is a big, complicated Common Lisp/Bourne shell polyglot
which tries to do everything but doesn't quite succeed.

** It's slow.

I took a trivial Lisp script:

: (format t "Hello from ~A!~%~
:            Script = `~A'~%~
:            Arguments = (~{`~A'~^, ~})~%"
:         (lisp-implementation-type)
:         (uiop:argv0)
:         uiop:*command-line-arguments*)

I timed how long it took to run on all of ~runlisp~'s supported Lisp
implementations, and compared them to how long ~cl-launch~ took: the
results are shown in table [[tab:runlisp-vanilla]].  ~runlisp~ is /at least/
two and half times faster at running this script than ~cl-launch~ on all
implementations except Clozure\nbsp{}CL[fn:slow-ccl], and approaching
four and a half times faster on SBCL.

#+CAPTION: ~cl-launch~ vs ~runlisp~ (with vanilla images)
#+NAME: tab:runlisp-vanilla
#+ATTR_LATEX: :float t :placement [tbp]
|------------------+-------------------+-----------------+----------------------|
| *Implementation* | *~cl-launch~ (s)* | *~runlisp~ (s)* | *~runlisp~ (factor)* |
|------------------+-------------------+-----------------+----------------------|
| ABCL             |            7.3378 |          2.6474 | 2.772                |
| Clozure CL       |            1.2888 |          0.9742 | 1.323                |
| GNU CLisp        |            1.2405 |          0.2703 | 4.589                |
| CMU CL           |            0.9521 |          0.3097 | 3.074                |
| ECL              |            0.8020 |          0.3236 | 2.478                |
| SBCL             |            0.3205 |          0.0874 | 3.667                |
|------------------+-------------------+-----------------+----------------------|
#+TBLFM: $4=$2/$3;%.3f

But this is using the `vanilla' Lisp images installed with the
implementations.  ~runlisp~ by default builds custom images for most
Lisp implementations, which improves startup performance significantly;
see table [[tab:runlisp-custom]].  (I don't currently know how to build a
useful custom image for ABCL.  ~runlisp~ does build a custom image for
ECL, but it doesn't help significantly.)  These results are summarized
in figure [[fig:lisp-graph]].

#+CAPTION: ~cl-launch~ vs ~runlisp~ (with custom images)
#+NAME: tab:runlisp-custom
#+ATTR_LATEX: :float t :placement [tbp]
|------------------+-------------------+-----------------+----------------------|
| *Implementation* | *~cl-launch~ (s)* | *~runlisp~ (s)* | *~runlisp~ (factor)* |
|------------------+-------------------+-----------------+----------------------|
| ABCL             |            7.3378 |          2.7023 | 2.715                |
| Clozure CL       |            1.2888 |          0.0371 | 34.739               |
| GNU CLisp        |            1.2405 |          0.0191 | 64.948               |
| CMU CL           |            0.9521 |          0.0060 | 158.683              |
| ECL              |            0.8020 |          0.3275 | 2.449                |
| SBCL             |            0.3205 |          0.0064 | 50.078               |
|------------------+-------------------+-----------------+----------------------|
#+TBLFM: $4=$2/$3;%.3f

#+CAPTION: Comparison of ~runlisp~ and ~cl-launch~ times
#+NAME: fig:lisp-graph
#+ATTR_LATEX: :float t :placement [tbp]
[[file:doc/lisp-graph.tikz]]

Unlike ~cl-launch~, with some Lisp implementations at least, ~runlisp~
startup performance is usefully comparable to other popular scripting
language implementations.  I wrote similarly trivial scripts in a number
of other languages, and timed them; the results are tabulated in table
[[tab:runlisp-interp]] and graphed in figure [[fig:interp-graph]].

#+CAPTION: ~runlisp~ vs other interpreters
#+NAME: tab:runlisp-interp
#+ATTR_LATEX: :float t :placement [tbp]
|------------------------------+-------------|
| *Implementation*             | *Time (ms)* |
|------------------------------+-------------|
| Clozure CL                   |        37.1 |
| GNU CLisp                    |        19.1 |
| CMU CL                       |         6.0 |
| SBCL                         |         6.4 |
|------------------------------+-------------|
| Perl                         |         1.1 |
| Python                       |         6.8 |
|------------------------------+-------------|
| Debian Almquist shell (dash) |         1.2 |
| GNU Bash                     |         1.5 |
| Z Shell                      |         3.1 |
|------------------------------+-------------|
| Tiny C (compile & run)       |         1.6 |
| GCC (precompiled)            |         0.6 |
|------------------------------+-------------|

#+CAPTION: Comparison of ~runlisp~ and other script interpreters
#+NAME: fig:interp-graph
#+Attr_latex: :float t :placement [tbp]
[[file:doc/interp-graph.tikz]]

(All the timings in this section were performed on the same 2020 Dell
XPS13 laptop running Debian `buster'.  The tools used to make the
measurements are included in the source distribution, in the ~bench/~
subdirectory.)

[fn:slow-ccl] I don't know why Clozure\nbsp{}CL shows such a small
difference here.

** It's inconvenient

~cl-launch~ has this elaborate machinery which reads shell script
fragments from various places and sets variables like ~$LISPS~, but it
doesn't quite work.

Unlike other scripting languages such as Perl or Python, Common Lisp has
lots of implementations, and they all have various unique features (and
bugs) which a script might rely on (or need to avoid).  Also, a user
might have preferences about which Lisps to use.  ~cl-launch~'s approach
to this problem is a ~system_preferred_lisps~ shell function which can
be used in ~~/.cl-launchrc~ to select a Lisp system for a particular
`software system', though this notion doesn't appear to be well-defined,
but this all works by editing a single ~$LISPS~ shell variable.  By
contrast, ~runlisp~ has a ~-L~ option with which scripts can specify the
Lisp systems they support (in a preference order), and a ~prefer~
configuration setting with which users can express their own
preferences: ~runlisp~ will never choose a Lisp system which the script
can't deal with, but it will respect the user's relative preferences.

Also, ~cl-launch~ is a monolith.  Adding a new Lisp implementation to
it, or changing how a particular implementation is invoked, is rather
involved.  By contrast, ~runlisp~ makes this remarkably easy, as
described in [[Supporting new Lisp implementations]].

** It doesn't establish a (useful) common environment

A number of Lisp systems are annoyingly deficient in their handling of
scripts.

For example, when GNU CLisp's ~-x~ option is used, it rebinds
~*standard-input*~ to an internal string stream holding the expression
passed in on the command line, leaving the process's actual stdin nearly
impossible to access.

: $ date | cl-launch -l sbcl -i "(princ (read-line nil nil))" # expected
: Sun  9 Aug 14:39:10 BST 2020
: $ date | cl-launch -l clisp -i "(princ (read-line nil nil))" # bug!
: NIL

As another example, Armed Bear Common Lisp doesn't seem to believe in
the stderr stream: when it starts up, ~*error-ouptut*~ is bound to the
standard output, just like ~*standard-output*~.  Also, ~cl-launch~
loading ASDF causes a huge number of ~style-warning~ messages to be
written to stdout, making ABCL pretty much useless for writing filter
scripts.

: $ cl-launch -l sbcl -i '(progn
:                           (format *standard-output* "output~%")
:                           (format *error-output* "error~%"))' \
:   > >(sed 's/^/stdout: /') 2> >(sed 's/^/stderr: /')
: stdout: output
: stderr: error
: $ cl-launch -l abcl -i '(progn
:                           (format *standard-output* "output~%")
:                           (format *error-output* "error~%"))' \
:   > >(sed 's/^/stdout: /') 2> >(sed 's/^/stderr: /')
: [1813 lines of compiler warnings tagged `stdout:']
: stdout: output
: stdout: error

~runlisp~ takes care of all of this, providing a basic but useful common
level of shell integration for all its supported Lisp implementations.
In particular:

  + It ensures that the standard Unix `stdin', `stdout', and `stderr'
    file descriptors are hooked up to the Lisp ~*standard-input*~,
    ~*standard-output*~, and ~*error-output*~ streams.

  + It ensures that starting a script doesn't write a deluge of
    diagnostic drivel.

The complete details are given in ~runlisp~'s manpage.

** Why might one prefer =cl-launch= anyway?

On the other hand, ~cl-launch~ is well established and full-featured.

~cl-launch~ compiles scripts before trying to run them, so they'll run
faster on Lisps which use an interpreter by default.  It has a caching
feature so running a script a second time doesn't need to recompile it.
If your scripts are compute-intensive and benefit from ahead-of-time
compilation then maybe ~cl-launch~ is preferable.

~cl-launch~ supports more Lisp systems.  I only have six installed on my
development machine at the moment, so those are the ones that ~runlisp~
supports.  If you want your scripts to be able to run on other Lisps,
then ~cl-launch~ is the way to do that.  Of course, I welcome patches to
help ~runlisp~ support other free Lisp implementations.  ~cl-launch~
also supports proprietary Lisps: I have very little interest in these,
so if you want to run scripts using Allegro or LispWorks then
~cl-launch~ is your only choice.