X-Git-Url: https://git.distorted.org.uk/~mdw/firewall/blobdiff_plain/8506ff83e7ea0db6fc8f7d56d702730d75f38fb6..994ac8d0782c89a636f47b02a2dc096c72ff58c5:/radius.m4

diff --git a/radius.m4 b/radius.m4
index 2d5f8aa..6b4a32a 100644
--- a/radius.m4
+++ b/radius.m4
@@ -57,6 +57,10 @@ iptables -A fwd-spec-nofrag -j ACCEPT \
 	-m mark --mark $from_untrusted/$MASK_FROM \
 	-m state --state ESTABLISHED
 
+## BCP38 filtering.  Note that addresses here are seen before NAT is applied.
+bcp38 4 ppp0 81.2.113.195 81.187.238.128/28 172.29.198.0/23
+bcp38 6 ppp0 2001:8b0:c92::/48
+
 ## NAT for RFC1918 addresses.
 for i in PREROUTING OUTPUT POSTROUTING; do
   run iptables -t nat -P $i ACCEPT 2>/dev/null || :
@@ -68,15 +72,20 @@ run iptables -t nat -X
 run iptables -t nat -N outbound
 run iptables -t nat -A outbound -j RETURN ! -o ppp0
 run iptables -t nat -A outbound -j RETURN ! -s 172.29.198.0/23
-run iptables -t nat -A outbound -j RETURN -d 62.49.204.144/28
+run iptables -t nat -A outbound -j RETURN -d 81.187.238.128/28
 run iptables -t nat -A outbound -j RETURN -d 172.29.198.0/23
-run iptables -t nat -A outbound -j SNAT --to-source 62.49.204.158
-run iptables -t nat -A POSTROUTING -j outbound
 
-## TCP MSS clamping to help given Demon's sluggish approach to fragmentation-
-## needed errors.
-run ip46tables -t mangle -A FORWARD -o ppp0 -p tcp --tcp-flags SYN,RST SYN \
-	-j TCPMSS --clamp-mss-to-pmtu
+## An awful hack.
+##run iptables -t nat -A outbound -j DNETMAP --reuse \
+##	-s 172.29.199.44 --prefix 81.187.238.142
+##run iptables -t nat -A outbound -j DNETMAP --reuse \
+##	-s 172.29.198.34 --prefix 81.187.238.142
+##run iptables -t nat -A outbound -j DNETMAP --reuse \
+##	-s 172.29.198.11 --prefix 81.187.238.142
+##run iptables -t nat -A PREROUTING -j DNETMAP
+
+run iptables -t nat -A outbound -j SNAT --to-source 81.187.238.142
+run iptables -t nat -A POSTROUTING -j outbound
 
 ## Set up NAT protocol helpers.  In particular, SIP needs some special
 ## twiddling.
@@ -88,8 +97,11 @@ for p in ftp sip h323; do
   run modprobe nf_nat_$p
 done
 
-## Forbid anything complicated to the NAT address.
-run iptables -A INPUT -d 62.49.204.158 ! -p icmp -j REJECT
+## Forbid anything complicated to the NAT address.  Be sure to allow ident,
+## though.
+run iptables -A INPUT -d 81.187.238.142 -p tcp -j ACCEPT \
+	-m multiport --destination-ports=113
+run iptables -A INPUT -d 81.187.238.142 ! -p icmp -j REJECT
 
 m4_divert(-1)
 ###----- That's all, folks --------------------------------------------------