Finish the switchover to Andrews & Arnold.

[firewall] / radius.m4

diff --git a/radius.m4 b/radius.m4
index d8efa4f..6b4a32a 100644 (file)
--- a/radius.m4
+++ b/radius.m4
@@ -58,10 +58,8 @@ iptables -A fwd-spec-nofrag -j ACCEPT \
        -m state --state ESTABLISHED
 
 ## BCP38 filtering.  Note that addresses here are seen before NAT is applied.
-bcp38 4 ppp0 62.49.204.144/28 172.29.198.0/23
-bcp38 6 t6-he \
-       2001:470:1f08:1b98::2 2001:470:1f09:1b98::/64 \
-       2001:470:9740::/48
+bcp38 4 ppp0 81.2.113.195 81.187.238.128/28 172.29.198.0/23
+bcp38 6 ppp0 2001:8b0:c92::/48
 
 ## NAT for RFC1918 addresses.
 for i in PREROUTING OUTPUT POSTROUTING; do
@@ -74,19 +72,19 @@ run iptables -t nat -X
 run iptables -t nat -N outbound
 run iptables -t nat -A outbound -j RETURN ! -o ppp0
 run iptables -t nat -A outbound -j RETURN ! -s 172.29.198.0/23
-run iptables -t nat -A outbound -j RETURN -d 62.49.204.144/28
+run iptables -t nat -A outbound -j RETURN -d 81.187.238.128/28
 run iptables -t nat -A outbound -j RETURN -d 172.29.198.0/23
 
 ## An awful hack.
 ##run iptables -t nat -A outbound -j DNETMAP --reuse \
-##     -s 172.29.199.44 --prefix 62.49.204.157
+##     -s 172.29.199.44 --prefix 81.187.238.142
 ##run iptables -t nat -A outbound -j DNETMAP --reuse \
-##     -s 172.29.198.34 --prefix 62.49.204.157
+##     -s 172.29.198.34 --prefix 81.187.238.142
 ##run iptables -t nat -A outbound -j DNETMAP --reuse \
-##     -s 172.29.198.11 --prefix 62.49.204.157
+##     -s 172.29.198.11 --prefix 81.187.238.142
 ##run iptables -t nat -A PREROUTING -j DNETMAP
 
-run iptables -t nat -A outbound -j SNAT --to-source 62.49.204.158
+run iptables -t nat -A outbound -j SNAT --to-source 81.187.238.142
 run iptables -t nat -A POSTROUTING -j outbound
 
 ## Set up NAT protocol helpers.  In particular, SIP needs some special
@@ -101,9 +99,9 @@ done
 
 ## Forbid anything complicated to the NAT address.  Be sure to allow ident,
 ## though.
-run iptables -A INPUT -d 62.49.204.158 -p tcp -j ACCEPT \
+run iptables -A INPUT -d 81.187.238.142 -p tcp -j ACCEPT \
        -m multiport --destination-ports=113
-run iptables -A INPUT -d 62.49.204.158 ! -p icmp -j REJECT
+run iptables -A INPUT -d 81.187.238.142 ! -p icmp -j REJECT
 
 m4_divert(-1)
 ###----- That's all, folks --------------------------------------------------