vampire.m4: Open a 6-in-4 tunnel through to Hurricane Electric.

[firewall] / vampire.m4

### -*-sh-*-
###
### Firewall configuration for vampire
###
### (c) 2008 Mark Wooding
###

###----- Licensing notice ---------------------------------------------------
###
### This program is free software; you can redistribute it and/or modify
### it under the terms of the GNU General Public License as published by
### the Free Software Foundation; either version 2 of the License, or
### (at your option) any later version.
###
### This program is distributed in the hope that it will be useful,
### but WITHOUT ANY WARRANTY; without even the implied warranty of
### MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
### GNU General Public License for more details.
###
### You should have received a copy of the GNU General Public License
### along with this program; if not, write to the Free Software Foundation,
### Inc., 59 Temple Place - Suite 330, Boston, MA 02111-1307, USA.

###--------------------------------------------------------------------------
### vampire-specific rules.

m4_divert(86)m4_dnl
## Externally visible services.
allowservices inbound tcp \
	finger ident \
	dns iodine \
	ssh \
	smtp submission \
	rdesktop \
	gnutella_svc \
	ftp ftp_data \
	rsync \
	imaps \
	disorder mpd \
	http https squid \
	git \
	tor_public tor_directory i2p
allowservices inbound udp \
	dns iodine \
	tripe \
	gnutella_svc \
	i2p

## Extend some services to local untrusted hosts.
clearchain inbound-untrusted
run iptables -A inbound -j inbound-untrusted \
	-s 172.29.198.0/24

allowservices inbound-untrusted tcp \
	dns \
	netbios_ssn microsoft_ds
allowservices inbound-untrusted udp \
	dns \
	tftp

## Provide syslog for evolution.
run iptables -A inbound -j ACCEPT \
	-s 172.29.198.2 \
	-p udp --destination-port $port_syslog

## Watch outgoing Tor usage.
run iptables -A OUTPUT -m multiport \
	-p tcp --source-ports $port_tor_public,$port_tor_directory

## Other interesting things.
dnsresolver inbound
ntpclient inbound $ntp_servers

## IPv6 6-in-4 tunnel.
run iptables -A inbound -j ACCEPT \
          -p $proto_ipv6 -s 216.66.80.26

## NAT for RFC1918 addresses.
for i in PREROUTING OUTPUT POSTROUTING; do
  run iptables -t nat -P $i ACCEPT 2>/dev/null || :
  run iptables -t nat -F $i 2>/dev/null || :
done
run iptables -t nat -F
run iptables -t nat -X

run iptables -t nat -N outbound
run iptables -t nat -A outbound -j RETURN ! -o eth0.0
run iptables -t nat -A outbound -j RETURN ! -s 172.29.198.0/23
run iptables -t nat -A outbound -j RETURN -d 62.49.204.144/28
run iptables -t nat -A outbound -j RETURN -d 172.29.198.0/23
run iptables -t nat -A outbound -j SNAT --to-source 62.49.204.158
run iptables -t nat -A POSTROUTING -j outbound

## Set up NAT protocol helpers.  In particular, SIP needs some special
## twiddling.
run modprobe nf_conntrack_sip \
  ports=5060 \
  sip_direct_signalling=0 \
  sip_direct_media=0
for p in ftp sip h323; do
  run modprobe nf_nat_$p
done

## Forbid anything complicated to the NAT address.
run iptables -A INPUT -d 62.49.204.158 ! -p icmp -j REJECT

m4_divert(-1)
###----- That's all, folks --------------------------------------------------