Debianization and various other fixes.

[ezmlm] / ezmlmrc.cs

#$Id: ezmlmrc.cs,v 1.8 1999/05/11 03:28:11 lindberg Exp $
#$Name: ezmlm-idx-040 $
#
# ezmlmrc 
# #######
# Controls the actions of ezmlm-make as patched with ezmlm-idx-0.31 or later.
#
# The base directory 'DIR' is always created by ezmlm-make, as is DIR/key.
# Everything else is done from here.
#
# ezmlm-make looks for this file, first as .ezmlmrc in the directory that the
# lists .qmail files will be placed in (if you've used the -c command line
# switch), then /etc/ezmlmrc, then ezmlmrc in the ezmlm-make binary directory.
# Thus, you can customize ezmlm-make on a global level by placing a customized
# copy of ezmlmrc in /etc and on a user level by copying it to .ezmlmrc in
# the user's home directory AND use the ezmlm-make -c switch.
#
# Tags are:
#	</filename/>       : put succeeding text lines in DIR/filename
#	</-filename/>      : erase DIR/filename.
#	</+dirname/>       : create directory DIR/dirname
#	</:lname/dirname>  : symlink DIR/.qmail-list-lname -> DIR/dirname
#
# The name in the tag can be suffixed with '#' and any number of flags,
# corresponding to command line switches. The item will be created/extended
# only if all the flags listed are set. Files can be extended as long as they
# were the last one created, but not if another file has been started since
# then. Flags that are not recognized are silently ignored.
# 
# Thus, </filename#aP/> creates the file if and only if the list is archived
# (-a) and not public (-P). If the next tag is </filename#m/>, the file is
# extended with the lines up to the next tag if the list is message moderated
# (-m). If the next tag is </another/>, 'filename' is closed. Any further
# tags leading to the reopenining of 'filename' will overwrite the file, not
# extend it.
#
# A set of user-defined command line switches (xX, yY, zZ) are available for
# customization.
#
# Within the text, certain tags are substituted. Other tags are copied as
# is. <#A#> and <#R#> are substituted by ezmlm-manage and -store (see man pages)
# and <#l#> (lower case L) is replaced dynamically by the list name for
# programs handling both 'list' and 'list-digest'.
#
# Substitutions are:
# <#B#> ezmlm binaries path   <#C#> digest code         <#D#> dir
# <#H#> host                  <#L#> local               <#F#> flags
# <#T#> dot                   <#0#> arg for -0. <#3#>...<#9#> arg for -3..9
# <#1#> ext1                  <#2#> ext2 [if dot is /path/.qmail-ext1-ext2-name]
# The latter useful when a single user is controlling several virtual domains.
#
# -0 is used for the main list address when setting up sublists
# -4 for specifying the ezmlm-tstdig switches used in dir/editor. Default
#    -k64 -m30 -t24. Only used if -g is used.
# -5 for list-owner address. Mail to list-owner will be forwarded to this addr.
# -6 for sql connection info
# -7 for contents of DIR/modpost
# -8 for contents of DIR/modsub
# -9 for contents of DIR/remote
#
# For demonstration purposes, the '-x' switch results in the following
# non-standard actions:
# - Removal of many non-text MIME parts from messages.
# - Limit posts to 2 bytes <= msg body size <= 40000
#
# Attempts to create links or directories that already exist, will result
# in a FATAL error. Attempts to open files that have already been closed
# or already exits, will cause the old file to be overwritten.
#
# One of the major problems with ezmlm-lists is DIR/inlocal. For normal
# users, it is set up to the list name (user-list or so), which is correct.
# However, for user 'ezmlm' in control of virtual domain 'host.dom.com'
# the list name is 'list@host.dom.com', but inlocal should be 'ezmlm-list',
# not 'list'. Similarly, if ezmlm-domain1 is in control of 'host.dom.com,
# list@host.dom.com, should yield an inlocal of 'ezmlm-domain1-list'. To
# always get the lists correct, place this file as '.ezmlmrc' in the 
# users home directory (~ezmlm/.ezmlmrc) and change the inlocal text below
# to 'ezmlm-<#L#>' or 'ezmlm-<#1#>-<#L#>, respectively.
# config to support future editing without giving ezmlm-make command line
# arguments other than dir. Useful for GUI/WWW editing tools
</config/>
F:<#F#>
D:<#D#>
T:<#T#>
L:<#L#>
H:<#H#>
C:<#C#>
0:<#0#>
3:<#3#>
4:<#4#>
5:<#5#>
6:<#6#>
7:<#7#>
8:<#8#>
9:<#9#>
</charset/>
# Explicitly specify character-set, when this ezmlmrc was used.
# Use Quoted-Printable to make averyone happy.
iso-8859-2:Q
</inlocal/>
<#L#>
</sublist#0/>
<#0#>
</+archive/>
</+subscribers/>
</+bounce/>
</+text/>
# dirs for digests
</+digest#d/>
</+digest/subscribers#d/>
</+digest/bounce#d/>
# for extra address db
</+allow/>
</+allow/subscribers/>
# for blacklist
</+deny#k/>
</+deny/subscribers#k/>
# moderator db & mod queue dirs. Needed for -m, -r -s, so we just
# make them by default.
</+mod/>
</+mod/subscribers/>
</+mod/pending/>
</+mod/accepted/>
</+mod/rejected/>
# links: dot -> dir/editor
</:/editor/>
</:-owner/owner/>
</:-digest-owner/owner#d/>
</:-return-default/bouncer/>
</:-digest-return-default/digest/bouncer#d/>
</:-default/manager/>
# for message moderation only
</:-accept-default/moderator#m/>
</:-reject-default/moderator#m/>
# Get rid of configuration flags for editing mode so we can start with a
# clean slate.
</-modpost#eM/>
</-modsub#eS/>
</-remote#eR/>
</-public#eP/>
</-indexed#eI/>
</-archived#eA/>
</-prefix#eF/>
</-text/trailer#eT/>
</-sublist#e^0/>
</-mimeremove#eX/>
# Not needed, except for message moderation.
</-moderator#eM/>
# We don't clean out text files to make it easier for users
# doing manual config by e.g. touching dir/remote.
# subscription moderation
</modsub#s/>
<#8#>
# remote admin
</remote#r/>
<#9#>
# message moderation
</modpost#m/>
<#7#>
# List owner mail
</owner#5/>
<#5#>
</owner#^5/>
<#D#>/Mailbox
</#W/>
|<#B#>/ezmlm-warn '<#D#>' || exit 0
# Handles subscription. Add flags if you want a non-default digest format.
# Service subject commands to the # request address if the -q switch is given.
# Also -l and -d enable subscriber listing/text file editing, for remote adms.
# -u gives subscriber only archive access
</manager#iG/>
|<#B#>/ezmlm-get '<#D#>' <#C#>
</manager#ig/>
|<#B#>/ezmlm-get -s '<#D#>' <#C#>
</manager#q/>
|<#B#>/ezmlm-request '<#D#>'
# Ok to add -l/-d even for non-mod lists, since ezmlm-manage
# won't allow it unless there are remote admins.
</manager#LN/>
|<#B#>/ezmlm-manage '<#D#>'
</manager#lN/>
|<#B#>/ezmlm-manage -l '<#D#>'
</manager#Ln/>
|<#B#>/ezmlm-manage -e '<#D#>'
</manager#ln/>
|<#B#>/ezmlm-manage -le '<#D#>'
</manager#W/>
|<#B#>/ezmlm-warn '<#D#>' || exit 0
</#dW/>
|<#B#>/ezmlm-warn -d '<#D#>' || exit 0
</editor/>
# reject shouldn't be configured for sublist.
</#^0/>
# full reject is now default, to get To/Cc: listaddress requirement
|<#B#>/ezmlm-reject '<#D#>'
# -k => reject posts from blacklisted addresses. Done for moderated
# lists as well - allows removal of unwanted noise.
</#k^0/>