X-Git-Url: https://git.distorted.org.uk/u/mdw/putty/blobdiff_plain/388f343bce8fbbafc9e8c9548ade3e15279e992a..2184a5d91ffbcf2de2f730c83dda2d9443035f50:/doc/gs.but

diff --git a/doc/gs.but b/doc/gs.but
index baf981f4..dfad7eb6 100644
--- a/doc/gs.but
+++ b/doc/gs.but
@@ -1,3 +1,5 @@
+\versionid $Id: gs.but,v 1.5 2001/11/25 17:32:39 simon Exp $
+
 \C{gs} Getting started with PuTTY
 
 This chapter gives a quick guide to the simplest types of
@@ -13,18 +15,18 @@ You don't usually need to change most of the configuration options.
 To start the simplest kind of session, all you need to do is to
 enter a few basic parameters.
 
-In the \e{Host Name} box, enter the Internet host name of the server
+In the \q{Host Name} box, enter the Internet host name of the server
 you want to connect to. You should have been told this by the
 provider of your login account.
 
-Now select a login protocol to use, from the \e{Protocol} buttons.
+Now select a login protocol to use, from the \q{Protocol} buttons.
 For a login session, you should select Telnet, Rlogin or SSH. See
 \k{which-one} for a description of the differences between the three
 protocols, and advice on which one to use. The fourth protocol,
 \e{Raw}, is not used for interactive login sessions; you would
 usually use this for debugging other Internet services.
 
-When you change the selected protocol, the number in the \e{Port}
+When you change the selected protocol, the number in the \q{Port}
 box will change. This is normal: it happens because the various
 login services are usually provided on different network ports by
 the server machine. Most servers will use the standard port numbers,
@@ -33,9 +35,9 @@ provides login services on a non-standard port, your system
 administrator should have told you which one. (For example, many
 MUDs run Telnet service on a port other than 23.)
 
-Once you have filled in the \e{Host Name}, \e{Protocol}, and
-possibly \e{Port} settings, you are ready to connect. Press the
-\e{Open} button at the bottom of the dialog box, and PuTTY will
+Once you have filled in the \q{Host Name}, \q{Protocol}, and
+possibly \q{Port} settings, you are ready to connect. Press the
+\q{Open} button at the bottom of the dialog box, and PuTTY will
 begin trying to connect you to the server.
 
 \H{gs-hostkey} Verifying the Host Key (SSH only)
@@ -45,7 +47,17 @@ If you are not using the SSH
 If you are using SSH to connect to a server for the first time, you
 will probably see a message looking something like this:
 
-\# FIXME: copy the real message from the host key dialog
+\c The server's host key is not cached in the registry. You
+\c have no guarantee that the server is the computer you
+\c think it is.
+\c The server's key fingerprint is:
+\c ssh-rsa 1024 7b:e5:6f:a7:f4:f9:81:62:5c:e3:1f:bf:8b:57:6c:5a
+\c If you trust this host, hit Yes to add the key to
+\c PuTTY's cache and carry on connecting.
+\c If you want to carry on connecting just once, without
+\c adding the key to the cache, hit No.
+\c If you do not trust this host, hit Cancel to abandon the
+\c connection.
 
 This is a feature of the SSH protocol. It is designed to protect you
 against a network attack known as \e{spoofing}: secretly redirecting