radioline() was broken after the portable-dialog stuff got added, so

[u/mdw/putty] / doc / plink.but

diff --git a/doc/plink.but b/doc/plink.but
index a1ef625..fbc9662 100644 (file)
--- a/doc/plink.but
+++ b/doc/plink.but
@@ -1,4 +1,4 @@
-\versionid $Id: plink.but,v 1.13 2001/12/31 16:15:19 simon Exp $
+\versionid $Id: plink.but,v 1.18 2003/03/24 10:49:01 simon Exp $

 
 \C{plink} Using the command-line connection tool Plink
 
 
 \C{plink} Using the command-line connection tool Plink
 


@@ -43,13 +43,28 @@ use Plink:
 
 \c Z:\sysosd>plink
 \c PuTTY Link: command-line connection utility
 
 \c Z:\sysosd>plink
 \c PuTTY Link: command-line connection utility

-\c Release 0.50
+\c Release 0.53

 \c Usage: plink [options] [user@]host [command]
 \c Usage: plink [options] [user@]host [command]

+\c        ("host" can also be a PuTTY saved session name)

 \c Options:
 \c   -v        show verbose messages
 \c Options:
 \c   -v        show verbose messages

-\c   -ssh      force use of ssh protocol
+\c   -load sessname  Load settings from saved session
+\c   -ssh -telnet -rlogin -raw
+\c             force use of a particular protocol (default SSH)

 \c   -P port   connect to specified port
 \c   -P port   connect to specified port

+\c   -l user   connect with specified username
+\c   -m file   read remote command(s) from file
+\c   -batch    disable all interactive prompts
+\c The following options only apply to SSH connections:

 \c   -pw passw login with specified password
 \c   -pw passw login with specified password

+\c   -L listen-port:host:port   Forward local port to remote address
+\c   -R listen-port:host:port   Forward remote port to local address
+\c   -X -x     enable / disable X11 forwarding
+\c   -A -a     enable / disable agent forwarding
+\c   -t -T     enable / disable pty allocation
+\c   -1 -2     force use of particular protocol version
+\c   -C        enable compression
+\c   -i key    private key file for authentication

 
 Once this works, you are ready to use Plink.
 
 
 Once this works, you are ready to use Plink.
 


@@ -109,6 +124,19 @@ Usually Plink is not invoked directly by a user, but run
 automatically by another process. Therefore you typically do not
 want Plink to prompt you for a user name or a password.
 
 automatically by another process. Therefore you typically do not
 want Plink to prompt you for a user name or a password.
 

+Next, you are likely to need to avoid the various interactive
+prompts Plink can produce. You might be prompted to verify the host
+key of the server you're connecting to, to enter a user name, or to
+enter a password.
+
+To avoid being prompted for the server host key when using Plink for
+an automated connection, you should first make a \e{manual}
+connection (using either of PuTTY or Plink) to the same server,
+verify the host key (see \k{gs-hostkey} for more information), and
+select Yes to add the host key to the Registry. After that, Plink
+commands connecting to that server should not give a host key prompt
+unless the host key changes.
+

 To avoid being prompted for a user name, you can:
 
 \b Use the \c{-l} option to specify a user name on the command line.
 To avoid being prompted for a user name, you can:
 
 \b Use the \c{-l} option to specify a user name on the command line.


@@ -151,68 +179,14 @@ details:
 Then you can set up other programs to run this Plink command and
 talk to it as if it were a process on the server machine.
 
 Then you can set up other programs to run this Plink command and
 talk to it as if it were a process on the server machine.
 

-You may also find it useful to use the \c{-batch} command-line
-option; see \k{plink-usage-options-batch}.
-
-\S{plink-usage-options} Options
-
-This section describes the command line options that Plink accepts.
-
-\S2{plink-usage-options-v}\c{-v} show verbose messages
-
-By default, Plink only displays any password prompts and the output of
-the remote command.  The \c{-v} option makes it print extra
-information about the connection being made, for example:
-
-\c Server version: SSH-1.5-OpenSSH-1.2.3
-\c We claim version: SSH-1.5-PuTTY
-\c Using SSH protocol version 1
-\c Received public keys
-\c Host key fingerprint is:
-\c       1023 e3:65:44:44:bd:b1:04:59:bc:e2:3d:a1:4d:09:ce:99
-\c Encrypted session key
-\c Using 3DES encryption
-\c Trying to enable encryption...
-\c Successfully started encryption
-\c Sent username "fred".
-\c Sent username "fred"
-\c fred@example.com's password:
-
-This information can be useful for diagnosing problems.
-
-\S2{plink-usage-options-ssh} Protocol selection options
-
-Plink is most useful when using the SSH protocol. However, it allows
-you to interface to all the protocols supported by PuTTY. You can
-specify the option \c{-ssh} on the command line to select the SSH
-protocol; you can also specify \c{-telnet}, \c{-rlogin} or \c{-raw}
-to select other protocols.
-
-\S2{plink-usage-options-P}\c{-P port} connect to specified port
-
-If your server machine is running its SSH service on a port other
-than the standard one, you can specify an alternative port number to
-connect to using the \c{-P} option, like this:
-
-\c plink -ssh login.example.com -P 5022
-
-\S2{plink-usage-options-pw}\c{-pw passw} login with specified password
-
-A simple way to automate a remote login is to supply your password
-on the Plink command line. This is \e{not recommended} for reasons
-of security. If you possibly can, we recommend you set up public-key
-authentication instead. See \k{pubkey} for details.
+\S{plink-options} Plink command line options

 
 

-\S2{plink-usage-options-user}\c{-l username} login with specified
-username
+Plink accepts all the general command line options supported by the
+PuTTY tools. See \k{using-general-opts} for a description of these
+options.

 
 

-As described in \k{plink-usage-batch}, you can specify the user name
-to log in as on the remote server using the \c{-l} option. For
-example, \c{plink login.example.com -l fred}.
-
-\S2{plink-usage-options-batch}\c{-batch} avoid interactive prompts
-
-If you use the \c{-batch} option, Plink will never give an
+In addition to this, Plink accepts one other option: the \c{-batch}
+option. If you use the \c{-batch} option, Plink will never give an

 interactive prompt while establishing the connection. If the
 server's host key is invalid, for example (see \k{gs-hostkey}), then
 the connection will simply be abandoned instead of asking you what
 interactive prompt while establishing the connection. If the
 server's host key is invalid, for example (see \k{gs-hostkey}), then
 the connection will simply be abandoned instead of asking you what


@@ -222,40 +196,6 @@ This may help Plink's behaviour when it is used in automated
 scripts: using \c{-batch}, if something goes wrong at connection
 time, the batch job will fail rather than hang.
 
 scripts: using \c{-batch}, if something goes wrong at connection
 time, the batch job will fail rather than hang.
 

-\S2{plink-usage-options-cmdfile} \c{-m filename} read command from a
-file
-
-If the command you want to run on the remote server is particularly
-large, you can read it from a file using the \c{-m} option, instead
-of putting it directly on Plink's command line. On most Unix
-systems, you can even put multiple lines in this file and execute
-more than one command in sequence, or a whole shell script.
-
-\S2{plink-usage-options-portfwd} \c{-L} and \c{-R} set up port
-forwarding
-
-Plink allows you to use port forwarding just as PuTTY does; if you
-have set up a PuTTY saved session that specifies port forwardings,
-and you connect to that session using Plink, then the same port
-forwardings will be set up.
-
-For convenience, Plink also offers the option to set up port
-forwarding on the command line. The command-line options work just
-like the ones in Unix \c{ssh} programs.
-
-To forward a local port (say 5110) to a remote destination (say
-\cw{popserver.example.com} port 110), you can write:
-
-\c plink mysession -L 5110:popserver.example.com:110
-
-And to forward a remote port to a local destination, just use the
-\c{-R} option instead of \c{-L}:
-
-\c plink mysession -R 5023:mytelnetserver.myhouse.org:23
-
-For general information on port forwarding, see
-\k{using-port-forwarding}.
-

 \H{plink-batch} Using Plink in \i{batch files} and \i{scripts}
 
 Once you have set up Plink to be able to log in to a remote server
 \H{plink-batch} Using Plink in \i{batch files} and \i{scripts}
 
 Once you have set up Plink to be able to log in to a remote server


@@ -310,6 +250,10 @@ a CVS command as in \k{plink-cvs}, for example:
 
 \c cvs -d :ext:user@hostname:/path/to/repository co module
 
 
 \c cvs -d :ext:user@hostname:/path/to/repository co module
 

+or (if you're using a saved session):
+
+\c cvs -d :ext:user@sessionname:/path/to/repository co module
+

 Select the folder you want to check out to with the \q{Change Folder}
 button, and click \q{OK} to check out your module.  Once you've got
 modules checked out, WinCVS will happily invoke plink from the GUI for
 Select the folder you want to check out to with the \q{Change Folder}
 button, and click \q{OK} to check out your module.  Once you've got
 modules checked out, WinCVS will happily invoke plink from the GUI for