#define incpos(p) ( (p).x == cols ? ((p).x = 0, (p).y++, 1) : ((p).x++, 0) )
#define decpos(p) ( (p).x == 0 ? ((p).x = cols, (p).y--, 1) : ((p).x--, 0) )
+/* Product-order comparisons for rectangular block selection. */
+#define posPlt(p1,p2) ( (p1).y <= (p2).y && (p1).x < (p2).x )
+#define posPle(p1,p2) ( (p1).y <= (p2).y && (p1).x <= (p2).x )
+
static bufchain inbuf; /* terminal input buffer */
static pos curs; /* cursor */
static pos savecurs; /* saved cursor position */
NO_SELECTION, ABOUT_TO, DRAGGING, SELECTED
} selstate;
static enum {
+ LEXICOGRAPHIC, RECTANGULAR
+} seltype;
+static enum {
SM_CHAR, SM_WORD, SM_LINE
} selmode;
static pos selstart, selend, selanchor;
for (i = 0; i < rows; i++) {
unsigned long *ldata;
int lattr;
- int idx, dirty_line, dirty_run;
+ int idx, dirty_line, dirty_run, selected;
unsigned long attr = 0;
int updated_line = 0;
int start = 0;
tattr |= ATTR_WIDE;
/* Video reversing things */
+ if (seltype == LEXICOGRAPHIC)
+ selected = posle(selstart, scrpos) && poslt(scrpos, selend);
+ else
+ selected = posPle(selstart, scrpos) && posPlt(scrpos, selend);
tattr = (tattr ^ rv
- ^ (posle(selstart, scrpos) &&
- poslt(scrpos, selend) ? ATTR_REVERSE : 0));
+ ^ (selected ? ATTR_REVERSE : 0));
/* 'Real' blinking ? */
if (blink_is_real && (tattr & ATTR_BLINK)) {
term_update();
}
-static void clipme(pos top, pos bottom)
+static void clipme(pos top, pos bottom, int rect)
{
wchar_t *workbuf;
wchar_t *wbptr; /* where next char goes within workbuf */
+ int old_top_x;
int wblen = 0; /* workbuf len */
int buflen; /* amount of memory allocated to workbuf */
buflen = 5120; /* Default size */
workbuf = smalloc(buflen * sizeof(wchar_t));
wbptr = workbuf; /* start filling here */
+ old_top_x = top.x; /* needed for rect==1 */
while (poslt(top, bottom)) {
int nl = FALSE;
unsigned long *ldata = lineptr(top.y);
pos nlpos;
+ /*
+ * nlpos will point at the maximum position on this line we
+ * should copy up to. So we start it at the end of the
+ * line...
+ */
nlpos.y = top.y;
nlpos.x = cols;
+ /*
+ * ... move it backwards if there's unused space at the end
+ * of the line (and also set `nl' if this is the case,
+ * because in normal selection mode this means we need a
+ * newline at the end)...
+ */
if (!(ldata[cols] & LATTR_WRAPPED)) {
while (((ldata[nlpos.x - 1] & 0xFF) == 0x20 ||
(DIRECT_CHAR(ldata[nlpos.x - 1]) &&
if (poslt(nlpos, bottom))
nl = TRUE;
}
+
+ /*
+ * ... and then clip it to the terminal x coordinate if
+ * we're doing rectangular selection. (In this case we
+ * still did the above, so that copying e.g. the right-hand
+ * column from a table doesn't fill with spaces on the
+ * right.)
+ */
+ if (rect) {
+ if (nlpos.x > bottom.x)
+ nlpos.x = bottom.x;
+ nl = (top.y < bottom.y);
+ }
+
while (poslt(top, bottom) && poslt(top, nlpos)) {
#if 0
char cbuf[16], *p;
}
}
top.y++;
- top.x = 0;
+ top.x = rect ? old_top_x : 0;
}
wblen++;
*wbptr++ = 0;
pos top;
top.y = -count234(scrollback);
top.x = 0;
- clipme(top, curs);
+ clipme(top, curs, 0);
}
/*
static void sel_spread(void)
{
- selstart = sel_spread_half(selstart, -1);
- decpos(selend);
- selend = sel_spread_half(selend, +1);
- incpos(selend);
+ if (seltype == LEXICOGRAPHIC) {
+ selstart = sel_spread_half(selstart, -1);
+ decpos(selend);
+ selend = sel_spread_half(selend, +1);
+ incpos(selend);
+ }
}
void term_do_paste(void)
}
void term_mouse(Mouse_Button b, Mouse_Action a, int x, int y,
- int shift, int ctrl)
+ int shift, int ctrl, int alt)
{
pos selpoint;
unsigned long *ldata;
int raw_mouse = xterm_mouse && !(cfg.mouse_override && shift);
+ int default_seltype;
if (y < 0) {
y = 0;
b = translate_button(b);
+ /*
+ * Set the selection type (rectangular or normal) at the start
+ * of a selection attempt, from the state of Alt.
+ */
+ if (!alt ^ !cfg.rect_select)
+ default_seltype = RECTANGULAR;
+ else
+ default_seltype = LEXICOGRAPHIC;
+
+ if (selstate == NO_SELECTION) {
+ seltype = default_seltype;
+ }
+
if (b == MBT_SELECT && a == MA_CLICK) {
deselect();
selstate = ABOUT_TO;
+ seltype = default_seltype;
selanchor = selpoint;
selmode = SM_CHAR;
} else if (b == MBT_SELECT && (a == MA_2CLK || a == MA_3CLK)) {
if (selstate == ABOUT_TO && poseq(selanchor, selpoint))
return;
if (b == MBT_EXTEND && a != MA_DRAG && selstate == SELECTED) {
- if (posdiff(selpoint, selstart) <
- posdiff(selend, selstart) / 2) {
- selanchor = selend;
- decpos(selanchor);
+ if (seltype == LEXICOGRAPHIC) {
+ /*
+ * For normal selection, we extend by moving
+ * whichever end of the current selection is closer
+ * to the mouse.
+ */
+ if (posdiff(selpoint, selstart) <
+ posdiff(selend, selstart) / 2) {
+ selanchor = selend;
+ decpos(selanchor);
+ } else {
+ selanchor = selstart;
+ }
} else {
- selanchor = selstart;
+ /*
+ * For rectangular selection, we have a choice of
+ * _four_ places to put selanchor and selpoint: the
+ * four corners of the selection.
+ */
+ if (2*selpoint.x < selstart.x + selend.x)
+ selanchor.x = selend.x-1;
+ else
+ selanchor.x = selstart.x;
+
+ if (2*selpoint.y < selstart.y + selend.y)
+ selanchor.y = selend.y;
+ else
+ selanchor.y = selstart.y;
}
selstate = DRAGGING;
}
if (selstate != ABOUT_TO && selstate != DRAGGING)
selanchor = selpoint;
selstate = DRAGGING;
- if (poslt(selpoint, selanchor)) {
- selstart = selpoint;
- selend = selanchor;
- incpos(selend);
+ if (seltype == LEXICOGRAPHIC) {
+ /*
+ * For normal selection, we set (selstart,selend) to
+ * (selpoint,selanchor) in some order.
+ */
+ if (poslt(selpoint, selanchor)) {
+ selstart = selpoint;
+ selend = selanchor;
+ incpos(selend);
+ } else {
+ selstart = selanchor;
+ selend = selpoint;
+ incpos(selend);
+ }
} else {
- selstart = selanchor;
- selend = selpoint;
- incpos(selend);
+ /*
+ * For rectangular selection, we may need to
+ * interchange x and y coordinates (if the user has
+ * dragged in the -x and +y directions, or vice versa).
+ */
+ selstart.x = min(selanchor.x, selpoint.x);
+ selend.x = 1+max(selanchor.x, selpoint.x);
+ selstart.y = min(selanchor.y, selpoint.y);
+ selend.y = max(selanchor.y, selpoint.y);
}
sel_spread();
} else if ((b == MBT_SELECT || b == MBT_EXTEND) && a == MA_RELEASE) {
* We've completed a selection. We now transfer the
* data to the clipboard.
*/
- clipme(selstart, selend);
+ clipme(selstart, selend, (seltype == RECTANGULAR));
selstate = SELECTED;
} else
selstate = NO_SELECTION;
projects / u / mdw / putty / blobdiff