once in the Licence box. Don't forget to change both!
- putty/windows/version.rc2
+ the copyright date appears once only.
- - putty/mac/mac_res.r
- + the copyright date appears twice, once in the About box and
- once in the Licence box. Don't forget to change both!
- - putty/mac/macpgen.r
- + the copyright date appears twice, once in the About box and
- once in the Licence box. Don't forget to change both!
- putty/unix/gtkdlg.c
+ the copyright date appears twice, once in the About box and
once in the Licence box. Don't forget to change both!
- putty/windows/version.rc2 (BASE_VERSION; NB, _comma_-separated)
-The Mac resource file (used to generate the binary bit of the 'vers'
-resources):
-
- - putty/mac/version.r
-
It might also be worth going through the documentation looking for
version numbers - we have a couple of transcripts showing the help
text from the command-line tools, and it would be nice to ensure the
- Write a release announcement (basically a summary of the changes
since the last release). Squirrel it away in
- ixion:src/putty/local/announce-<ver> in case it's needed again
+ atreus:src/putty/local/announce-<ver> in case it's needed again
within days of the release going out.
- - On my local machines, check out the release-tagged version of the
- sources. Do this in a _clean_ directory; don't depend on my usual
- source dir.
- + Make sure to run mkfiles.pl _after_ this checkout, just in
- case.
-
- - Build the source archives now, while the directory is still
- pristine.
- + run ./mksrcarc.sh to build the Windows source zip.
- + run `./mkunxarc.sh X.YZ' to build the Unix tarball.
-
- - Build the Windows/x86 release binaries. Don't forget to supply
- VER=/DRELEASE=<ver>. Run them, or at least one or two of them, to
- ensure that they really do report their version number correctly,
- and sanity-check the version info reported on the files by Windows.
- + Save the release link maps. Currently I keep these on ixion,
- in src/putty/local/maps-<version>.
-
- - Run Halibut to build the docs. Define VERSION on the make command
- line to override the version strings, since Subversion revision
- numbers are less meaningful on a tag.
- + change into the doc subdir
- + run `make VERSION="PuTTY release 0.XX" chm', then run `hhc
- putty.hhp' to build the .CHM
- + then run `make mostlyclean' (destroys the hhc input files but
- _not_ the .CHM)
- + then `make VERSION="PuTTY release 0.XX"'
-
- - Build the binary archive putty.zip: all the .exe files except
- PuTTYtel, and the .hlp, .cnt and .chm files.
- + zip -k putty.zip `ls *.exe | grep -v puttytel` putty.hlp putty.cnt putty.chm
-
- - Build the docs archive puttydoc.zip: it contains all the HTML
- files output from Halibut.
- + zip puttydoc.zip *.html
-
- - Build the installer.
-
- - Sign the release (gpg --detach-sign).
- + Sign the locally built x86 binaries, the locally built x86
- binary zipfile, and the locally built x86 installer, with the
- release keys.
- + The source archive should be signed with the release keys.
- + Don't forget to sign with both DSA and RSA keys for absolutely
- everything.
- for i in <filenames>; do for t in DSA RSA; do gpg --load-extension=idea --detach-sign -u "Releases ($t)" -o $i.$t $i; done; done
-
- - Begin to pull together the release directory structure.
- + subdir `x86' containing the x86 binaries, x86 binary zip, x86
- installer, and all signatures on the above.
- + top-level dir contains the Windows source zip (plus
- signatures), the Unix source tarball (plus signatures),
- puttydoc.txt, the .hlp, .cnt and .chm files, and puttydoc.zip.
-
- - Create subdir `htmldoc' in the release directory, which should
- contain exactly the same set of HTML files that went into
- puttydoc.zip.
- + It also needs a copy of sitestyle.css, because the online
- versions of the HTML docs will link to this (although the
- zipped form should be self-contained).
-
- - Create and sign an md5sums file in the top-level directory.
- + The md5sums files need not list the .DSA and .RSA signatures.
- Easiest thing is to run this command:
- md5sum `\find * -name '*SA' -o -type f -print` > md5sums
- + Sign the md5sums file (gpg --clearsign).
- for t in DSA RSA; do gpg --load-extension=idea --clearsign -u "Releases ($t)" -o md5sums.$t md5sums; done
-
- - Now double-check by verifying all the signatures on all the
- files, and running md5sum -c on the md5sums file.
+ - Build the release: `bob putty-0.XX RELEASE=0.XX'. This should
+ generate a basically valid release directory as
+ `build.out/putty', and provide link maps and sign.sh alongside
+ that in build.out.
+
+ - Do a bit of checking that the release binaries basically work,
+ report their version numbers accurately, and so on. Test the
+ installer and the Unix source tarball.
+
+ - Save the link maps. Currently I keep these on atreus, in
+ src/putty/local/maps-<version>.
+
+ - Sign the release: in the `build.out' directory, type `./sign.sh
+ putty Releases', and enter the passphrases a lot of times.
- Now the whole release directory should be present and correct.
- Upload to ixion:www/putty/<ver>.
+ Upload it to atreus:www/putty/<ver>.
- Do final checks on the release directory:
- + verify all the signatures. In each directory:
- for i in *.*SA; do case $i in md5sums*) gpg --verify $i;; *) gpg --verify $i `echo $i | sed 's/\..SA$//'`;; esac; done
- + check the md5sums:
+ + verify all the signatures:
+ for i in `find . -name '*.*SA'`; do case $i in *sums*) gpg --verify $i;; *) gpg --verify $i ${i%%.?SA};; esac; done
+ + check the checksum files:
md5sum -c md5sums
+ sha1sum -c sha1sums
+ sha256sum -c sha256sums
+ sha512sum -c sha512sums
- - Having double-checked the release, copy it from ixion to
+ - Having double-checked the release, copy it from atreus to
chiark:ftp/putty-<ver> and to the:www/putty/<ver>.
- Check the permissions! Actually try downloading from the, to make
+ Update the one at the:www/putty/htaccess which points the
virtual subdir `latest' at the actual latest release dir. TEST
THIS ONE - it's quite important.
- + ixion:www/putty/.htaccess has an individual redirect for each
+ + atreus:www/putty/.htaccess has an individual redirect for each
version number. Add a new one.
- Update the FTP symlink (chiark:ftp/putty-latest -> putty-<ver>).
- Update web site.
- + Adjust front page (`the latest version is <ver>').
- + Adjust Download page similarly.
- + Adjust filenames of installer and Unix tarball on links in
- Download page.
+ + Adjust front page to say 'The latest version is <ver>'.
+ + Adjust front page to add a news item.
+ + Adjust Download page to say 'The latest release version (<ver>)'.
+ + Adjust Download page to update filenames of installer and Unix
+ tarball (both in the hrefs themselves and the link text).
+ + Check over the Download page and remove any mention of
+ pre-releases, if there were any before this release. Comment out
+ the big pre-release section at the top, and also adjust the
+ sections about source archives at the bottom.
+ Adjust header text on Changelog page. (That includes changing
`are new' in previous version to `were new'!)
- Check that the web server attaches the right content type to .HLP
and .CNT files.
- - Run webupdate, so that all the changes on ixion propagate to
+ - Run webupdate, so that all the changes on atreus propagate to
chiark. Important to do this _before_ announcing that the release
is available.
- - After running webupdate, run update-rsync on chiark and verify
- that the rsync mirror package correctly identifies the new
- version.
+ - After running webupdate, run update-rsync on chiark and verify that
+ the rsync mirror package (~/ftp/putty-website-mirror) contains a
+ subdirectory for the new version and mentions it in its .htaccess.
- Announce the release!
- + Mail the announcement to putty-announce.
- * Set a Reply-To on the mail so that people don't keep
- replying to my personal address.
+ + Construct a release announcement email whose message body is the
+ announcement written above, and which includes the following
+ headers:
+ * Reply-To: <putty@projects.tartarus.org>
+ * Subject: PuTTY X.YZ is released
+ + Mail that release announcement to
+ <putty-announce@lists.tartarus.org>.
+ Post it to comp.security.ssh.
+ Mention it in <TDHTT> on mono.
projects / u / mdw / putty / blobdiff