#define BUG_SSH2_REKEY 64
#define BUG_SSH2_PK_SESSIONID 128
+/*
+ * Codes for terminal modes.
+ * Most of these are the same in SSH-1 and SSH-2.
+ * This list is derived from draft-ietf-secsh-connect-25 and
+ * SSH-1 RFC-1.2.31.
+ */
+static const struct {
+ const char* const mode;
+ int opcode;
+ enum { TTY_OP_CHAR, TTY_OP_BOOL } type;
+} ssh_ttymodes[] = {
+ /* "V" prefix discarded for special characters relative to SSH specs */
+ { "INTR", 1, TTY_OP_CHAR },
+ { "QUIT", 2, TTY_OP_CHAR },
+ { "ERASE", 3, TTY_OP_CHAR },
+ { "KILL", 4, TTY_OP_CHAR },
+ { "EOF", 5, TTY_OP_CHAR },
+ { "EOL", 6, TTY_OP_CHAR },
+ { "EOL2", 7, TTY_OP_CHAR },
+ { "START", 8, TTY_OP_CHAR },
+ { "STOP", 9, TTY_OP_CHAR },
+ { "SUSP", 10, TTY_OP_CHAR },
+ { "DSUSP", 11, TTY_OP_CHAR },
+ { "REPRINT", 12, TTY_OP_CHAR },
+ { "WERASE", 13, TTY_OP_CHAR },
+ { "LNEXT", 14, TTY_OP_CHAR },
+ { "FLUSH", 15, TTY_OP_CHAR },
+ { "SWTCH", 16, TTY_OP_CHAR },
+ { "STATUS", 17, TTY_OP_CHAR },
+ { "DISCARD", 18, TTY_OP_CHAR },
+ { "IGNPAR", 30, TTY_OP_BOOL },
+ { "PARMRK", 31, TTY_OP_BOOL },
+ { "INPCK", 32, TTY_OP_BOOL },
+ { "ISTRIP", 33, TTY_OP_BOOL },
+ { "INLCR", 34, TTY_OP_BOOL },
+ { "IGNCR", 35, TTY_OP_BOOL },
+ { "ICRNL", 36, TTY_OP_BOOL },
+ { "IUCLC", 37, TTY_OP_BOOL },
+ { "IXON", 38, TTY_OP_BOOL },
+ { "IXANY", 39, TTY_OP_BOOL },
+ { "IXOFF", 40, TTY_OP_BOOL },
+ { "IMAXBEL", 41, TTY_OP_BOOL },
+ { "ISIG", 50, TTY_OP_BOOL },
+ { "ICANON", 51, TTY_OP_BOOL },
+ { "XCASE", 52, TTY_OP_BOOL },
+ { "ECHO", 53, TTY_OP_BOOL },
+ { "ECHOE", 54, TTY_OP_BOOL },
+ { "ECHOK", 55, TTY_OP_BOOL },
+ { "ECHONL", 56, TTY_OP_BOOL },
+ { "NOFLSH", 57, TTY_OP_BOOL },
+ { "TOSTOP", 58, TTY_OP_BOOL },
+ { "IEXTEN", 59, TTY_OP_BOOL },
+ { "ECHOCTL", 60, TTY_OP_BOOL },
+ { "ECHOKE", 61, TTY_OP_BOOL },
+ { "PENDIN", 62, TTY_OP_BOOL }, /* XXX is this a real mode? */
+ { "OPOST", 70, TTY_OP_BOOL },
+ { "OLCUC", 71, TTY_OP_BOOL },
+ { "ONLCR", 72, TTY_OP_BOOL },
+ { "OCRNL", 73, TTY_OP_BOOL },
+ { "ONOCR", 74, TTY_OP_BOOL },
+ { "ONLRET", 75, TTY_OP_BOOL },
+ { "CS7", 90, TTY_OP_BOOL },
+ { "CS8", 91, TTY_OP_BOOL },
+ { "PARENB", 92, TTY_OP_BOOL },
+ { "PARODD", 93, TTY_OP_BOOL }
+};
+
+/* Miscellaneous other tty-related constants. */
+#define SSH_TTY_OP_END 0
+/* The opcodes for ISPEED/OSPEED differ between SSH-1 and SSH-2. */
+#define SSH1_TTY_OP_ISPEED 192
+#define SSH1_TTY_OP_OSPEED 193
+#define SSH2_TTY_OP_ISPEED 128
+#define SSH2_TTY_OP_OSPEED 129
+
+/* Helper functions for parsing tty-related config. */
+static unsigned int ssh_tty_parse_specchar(char *s)
+{
+ unsigned int ret;
+ if (*s) {
+ char *next = NULL;
+ ret = ctrlparse(s, &next);
+ if (!next) ret = s[0];
+ } else {
+ ret = 255; /* special value meaning "don't set" */
+ }
+ return ret;
+}
+static unsigned int ssh_tty_parse_boolean(char *s)
+{
+ if (stricmp(s, "yes") == 0 ||
+ stricmp(s, "on") == 0 ||
+ stricmp(s, "true") == 0 ||
+ stricmp(s, "+") == 0)
+ return 1; /* true */
+ else if (stricmp(s, "no") == 0 ||
+ stricmp(s, "off") == 0 ||
+ stricmp(s, "false") == 0 ||
+ stricmp(s, "-") == 0)
+ return 0; /* false */
+ else
+ return (atoi(s) != 0);
+}
+
#define translate(x) if (type == x) return #x
#define translatec(x,ctx) if (type == x && (pkt_ctx & ctx)) return #x
static char *ssh1_pkt_type(int type)
pkt->logmode = PKTLOG_EMIT;
}
+/* Helper function for common bits of parsing cfg.ttymodes. */
+static void parse_ttymodes(Ssh ssh, char *modes,
+ void (*do_mode)(void *data, char *mode, char *val),
+ void *data)
+{
+ while (*modes) {
+ char *t = strchr(modes, '\t');
+ char *m = snewn(t-modes+1, char);
+ char *val;
+ strncpy(m, modes, t-modes);
+ m[t-modes] = '\0';
+ if (*(t+1) == 'A')
+ val = get_ttymode(ssh->frontend, m);
+ else
+ val = dupstr(t+2);
+ if (val)
+ do_mode(data, m, val);
+ sfree(m);
+ sfree(val);
+ modes += strlen(modes) + 1;
+ }
+}
+
static int ssh_channelcmp(void *av, void *bv)
{
struct ssh_channel *a = (struct ssh_channel *) av;
ssh_closing((Plug)ssh, NULL, 0, 0);
}
+/* Helper function to deal with sending tty modes for REQUEST_PTY */
+static void ssh1_send_ttymode(void *data, char *mode, char *val)
+{
+ struct Packet *pktout = (struct Packet *)data;
+ int i = 0;
+ unsigned int arg = 0;
+ while (strcmp(mode, ssh_ttymodes[i].mode) != 0) i++;
+ if (i == lenof(ssh_ttymodes)) return;
+ switch (ssh_ttymodes[i].type) {
+ case TTY_OP_CHAR:
+ arg = ssh_tty_parse_specchar(val);
+ break;
+ case TTY_OP_BOOL:
+ arg = ssh_tty_parse_boolean(val);
+ break;
+ }
+ ssh2_pkt_addbyte(pktout, ssh_ttymodes[i].opcode);
+ ssh2_pkt_addbyte(pktout, arg);
+}
+
+
static void do_ssh1_connection(Ssh ssh, unsigned char *in, int inlen,
struct Packet *pktin)
{
ssh->packet_dispatch[SSH1_MSG_PORT_OPEN] = ssh1_msg_port_open;
if (!ssh->cfg.nopty) {
+ struct Packet *pkt;
/* Unpick the terminal-speed string. */
/* XXX perhaps we should allow no speeds to be sent. */
ssh->ospeed = 38400; ssh->ispeed = 38400; /* last-resort defaults */
sscanf(ssh->cfg.termspeed, "%d,%d", &ssh->ospeed, &ssh->ispeed);
/* Send the pty request. */
- send_packet(ssh, SSH1_CMSG_REQUEST_PTY,
- PKT_STR, ssh->cfg.termtype,
- PKT_INT, ssh->term_height,
- PKT_INT, ssh->term_width,
- PKT_INT, 0, PKT_INT, 0, /* width,height in pixels */
- PKT_CHAR, 192, PKT_INT, ssh->ispeed, /* TTY_OP_ISPEED */
- PKT_CHAR, 193, PKT_INT, ssh->ospeed, /* TTY_OP_OSPEED */
- PKT_CHAR, 0, PKT_END);
+ pkt = ssh1_pkt_init(SSH1_CMSG_REQUEST_PTY);
+ ssh_pkt_addstring(pkt, ssh->cfg.termtype);
+ ssh_pkt_adduint32(pkt, ssh->term_height);
+ ssh_pkt_adduint32(pkt, ssh->term_width);
+ ssh_pkt_adduint32(pkt, 0); /* width in pixels */
+ ssh_pkt_adduint32(pkt, 0); /* height in pixels */
+ parse_ttymodes(ssh, ssh->cfg.ttymodes,
+ ssh1_send_ttymode, (void *)pkt);
+ ssh_pkt_addbyte(pkt, SSH1_TTY_OP_ISPEED);
+ ssh_pkt_adduint32(pkt, ssh->ispeed);
+ ssh_pkt_addbyte(pkt, SSH1_TTY_OP_OSPEED);
+ ssh_pkt_adduint32(pkt, ssh->ospeed);
+ ssh_pkt_addbyte(pkt, SSH_TTY_OP_END);
+ s_wrpkt(ssh, pkt);
ssh->state = SSH_STATE_INTERMED;
do {
crReturnV;
}
}
+/* Helper function to deal with sending tty modes for "pty-req" */
+static void ssh2_send_ttymode(void *data, char *mode, char *val)
+{
+ struct Packet *pktout = (struct Packet *)data;
+ int i = 0;
+ unsigned int arg = 0;
+ while (strcmp(mode, ssh_ttymodes[i].mode) != 0) i++;
+ if (i == lenof(ssh_ttymodes)) return;
+ switch (ssh_ttymodes[i].type) {
+ case TTY_OP_CHAR:
+ arg = ssh_tty_parse_specchar(val);
+ break;
+ case TTY_OP_BOOL:
+ arg = ssh_tty_parse_boolean(val);
+ break;
+ }
+ ssh2_pkt_addbyte(pktout, ssh_ttymodes[i].opcode);
+ ssh2_pkt_adduint32(pktout, arg);
+}
+
/*
* Handle the SSH-2 userauth and connection layers.
*/
ssh2_pkt_adduint32(s->pktout, 0); /* pixel width */
ssh2_pkt_adduint32(s->pktout, 0); /* pixel height */
ssh2_pkt_addstring_start(s->pktout);
- ssh2_pkt_addbyte(s->pktout, 128); /* TTY_OP_ISPEED */
+ parse_ttymodes(ssh, ssh->cfg.ttymodes,
+ ssh2_send_ttymode, (void *)s->pktout);
+ ssh2_pkt_addbyte(s->pktout, SSH2_TTY_OP_ISPEED);
ssh2_pkt_adduint32(s->pktout, ssh->ispeed);
- ssh2_pkt_addbyte(s->pktout, 129); /* TTY_OP_OSPEED */
+ ssh2_pkt_addbyte(s->pktout, SSH2_TTY_OP_OSPEED);
ssh2_pkt_adduint32(s->pktout, ssh->ospeed);
ssh2_pkt_addstring_data(s->pktout, "\0", 1); /* TTY_OP_END */
ssh2_pkt_send(ssh, s->pktout);
projects / u / mdw / putty / blobdiff