# files to compute #include dependencies. Finally, writes out the
# various target Makefiles.
+# PuTTY specifics which could still do with removing:
+# - Mac makefile is not portabilised at all. Include directories
+# are hardwired, and also the libraries are fixed. This is
+# mainly because I was too scared to go anywhere near it.
+# - sbcsgen.pl is still run at startup.
+#
+# FIXME: no attempt made to handle !forceobj in the project files.
+
use FileHandle;
use Cwd;
# dependency analysis.
eval 'chdir "charset"; require "sbcsgen.pl"; chdir ".."';
-@incdirs = ("", "charset/", "unix/", "mac/");
+@srcdirs = ("./");
$divert = undef; # ref to scalar in which text is currently being put
$help = ""; # list of newline-free lines of help text
if ($_[0] eq "!begin" and $_[1] eq "help") { $divert = \$help; next; }
if ($_[0] eq "!end") { $divert = undef; next; }
if ($_[0] eq "!name") { $project_name = $_[1]; next; }
+ if ($_[0] eq "!srcdir") { push @srcdirs, $_[1]; next; }
if ($_[0] eq "!makefile" and &mfval($_[1])) { $makefiles{$_[1]}=$_[2]; next;}
+ if ($_[0] eq "!specialobj" and &mfval($_[1])) { $specialobj{$_[1]}->{$_[2]} = 1; next;}
+ if ($_[0] eq "!forceobj") { $forceobj{$_[1]} = 1; next; }
if ($_[0] eq "!begin") {
if (&mfval($_[1])) {
- $divert = \$makefile_extra{$_[1]};
+ $sect = $_[2] ? $_[2] : "end";
+ $divert = \($makefile_extra{$_[1]}->{$sect});
} else {
$divert = \$dummy;
}
next;
}
- # If we're gathering help text, keep doing so.
+ # If we're gathering help/verbatim text, keep doing so.
if (defined $divert) { ${$divert} .= "$_\n"; next; }
# Ignore blank lines.
next if scalar @_ == 0;
if ($groups{$i}) {
foreach $j (@{$groups{$i}}) { unshift @objs, $j; }
} elsif (($i eq "[G]" or $i eq "[C]" or $i eq "[M]" or
- $i eq "[X]" or $i eq "[U]") and defined $prog) {
- $type = substr($i,1,1);
+ $i eq "[X]" or $i eq "[U]" or $i eq "[MX]") and defined $prog) {
+ $type = substr($i,1,(length $i)-2);
} else {
push @$listref, $i;
}
sort @{$programs{$i}};
$programs{$i} = [@list];
foreach $j (@list) {
- # Dependencies for "x" start with "x.c".
+ # Dependencies for "x" start with "x.c" or "x.m" (depending on
+ # which one exists).
# Dependencies for "x.res" start with "x.rc".
# Dependencies for "x.rsrc" start with "x.r".
# Both types of file are pushed on the list of files to scan.
$file = "$1.r";
$depends{$j} = [$file];
push @scanlist, $file;
- } elsif ($j =~ /\.lib$/) {
- # libraries don't have dependencies
- } else {
+ } elsif ($j !~ /\./) {
$file = "$j.c";
+ $file = "$j.m" unless &findfile($file);
$depends{$j} = [$file];
push @scanlist, $file;
}
# added back on to @scanlist to be scanned in turn (if not already
# done).
#
-# Resource scripts (.rc) can also include a file by means of a line
-# ending `ICON "filename"'. Files included by this method are not
-# added to @scanlist because they can never include further files.
+# Resource scripts (.rc) can also include a file by means of:
+# - a line # ending `ICON "filename"';
+# - a line ending `RT_MANIFEST "filename"'.
+# Files included by this method are not added to @scanlist because
+# they can never include further files.
#
# In this pass we write out a hash %further which maps a source
# file name into a listref containing further source file names.
push @scanlist, $1;
next;
};
- /ICON\s+\"([^\"]+)\"\s*$/ and do {
- push @{$further{$file}}, $1;
+ /(RT_MANIFEST|ICON)\s+\"([^\"]+)\"\s*$/ and do {
+ push @{$further{$file}}, $2;
next;
}
}
# Returns true if the argument is a known makefile type. Otherwise,
# prints a warning and returns false;
if (grep { $type eq $_ }
- ("vc","vcproj","cygwin","borland","lcc","gtk","mpw")) {
+ ("vc","vcproj","cygwin","borland","lcc","devcppproj","gtk","ac","mpw",
+ "osx",)) {
return 1;
}
warn "$.:unknown makefile type '$type'\n";
# Utility routines while writing out the Makefiles.
+sub dirpfx {
+ my ($path) = shift @_;
+ my ($sep) = shift @_;
+ my $ret = "", $i;
+
+ while (($i = index $path, $sep) >= 0 ||
+ ($j = index $path, "/") >= 0) {
+ if ($i >= 0 and ($j < 0 or $i < $j)) {
+ $path = substr $path, ($i + length $sep);
+ } else {
+ $path = substr $path, ($j + 1);
+ }
+ $ret .= "..$sep";
+ }
+ return $ret;
+}
+
sub findfile {
my ($name) = @_;
- my $dir, $i, $outdir = "";
+ my $dir;
+ my $i;
+ my $outdir = undef;
unless (defined $findfilecache{$name}) {
$i = 0;
- foreach $dir (@incdirs) {
+ foreach $dir (@srcdirs) {
$outdir = $dir, $i++ if -f "$dir$name";
+ $outdir=~s/^\.\///;
}
die "multiple instances of source file $name\n" if $i > 1;
- $findfilecache{$name} = $outdir . $name;
+ $findfilecache{$name} = (defined $outdir ? $outdir . $name : undef);
}
return $findfilecache{$name};
}
} elsif ($i =~ /^(.*)\.lib/) {
$y = $1;
($x = $ltmpl) =~ s/X/$y/;
- } else {
+ } elsif ($i !~ /\./) {
($x = $otmpl) =~ s/X/$i/;
}
push @ret, $x if $x ne "";
return join " ", @ret;
}
+sub special {
+ my ($prog, $suffix) = @_;
+ my @ret;
+ my ($i, $x, $y);
+ @ret = ();
+ foreach $i (@{$programs{$prog}}) {
+ if (substr($i, (length $i) - (length $suffix)) eq $suffix) {
+ push @ret, $i;
+ }
+ }
+ return (scalar @ret) ? (join " ", @ret) : undef;
+}
+
sub splitline {
my ($line, $width, $splitchar) = @_;
my ($result, $len);
$splitchar = (defined $splitchar ? $splitchar : '\\');
while (length $line > $len) {
$line =~ /^(.{0,$len})\s(.*)$/ or $line =~ /^(.{$len,}?\s(.*)$/;
- $result .= $1 . " ${splitchar}\n\t\t";
+ $result .= $1;
+ $result .= " ${splitchar}\n\t\t" if $2 ne '';
$line = $2;
$len = 60;
}
}
sub deps {
- my ($otmpl, $rtmpl, $prefix, $dirsep, $depchar, $splitchar) = @_;
+ my ($otmpl, $rtmpl, $prefix, $dirsep, $mftyp, $depchar, $splitchar) = @_;
my ($i, $x, $y);
my @deps, @ret;
@ret = ();
$depchar ||= ':';
foreach $i (sort keys %depends) {
+ next if $specialobj{$mftyp}->{$i};
if ($i =~ /^(.*)\.(res|rsrc)/) {
next if !defined $rtmpl;
$y = $1;
s/\//$dirsep/g;
$_ = $prefix . $_;
} @deps;
- push @ret, {obj => $x, deps => [@deps]};
+ push @ret, {obj => $x, obj_orig => $i, deps => [@deps]};
}
return @ret;
}
@ret = ();
foreach $n (@prognames) {
($prog, $type) = split ",", $n;
- push @ret, $n if index($types, $type) >= 0;
+ push @ret, $n if index(":$types:", ":$type:") >= 0;
}
return @ret;
}
@ret = ();
foreach $n (@prognames) {
($prog, $type) = split ",", $n;
- push @ret, $prog if index($types, $type) >= 0;
+ push @ret, $prog if index(":$types:", ":$type:") >= 0;
}
return @ret;
}
my ($types,$suffix) = @_;
# assume that all UNIX programs have a man page
- if($suffix eq "1" && $types =~ /X/) {
+ if($suffix eq "1" && $types =~ /:X:/) {
return map("$_.1", &progrealnames($types));
}
return ();
# Now we're ready to output the actual Makefiles.
if (defined $makefiles{'cygwin'}) {
+ $dirpfx = &dirpfx($makefiles{'cygwin'}, "/");
##-- CygWin makefile
open OUT, ">$makefiles{'cygwin'}"; select OUT;
"#\n# This file was created by `mkfiles.pl' from the `Recipe' file.\n".
"# DO NOT EDIT THIS FILE DIRECTLY; edit Recipe or mkfiles.pl instead.\n";
# gcc command line option is -D not /D
- ($_ = $help) =~ s/=\/D/=-D/gs;
+ ($_ = $help) =~ s/([=" ])\/D/\1-D/gs;
print $_;
print
"\n".
"# RCINC = --include-dir c:\\cygwin\\include\\\n".
"\n".
&splitline("CFLAGS = -mno-cygwin -Wall -O2 -D_WINDOWS -DDEBUG -DWIN32S_COMPAT".
- " -D_NO_OLDNAMES -DNO_MULTIMON -I.")."\n".
+ " -D_NO_OLDNAMES -DNO_MULTIMON -DNO_HTMLHELP " .
+ (join " ", map {"-I$dirpfx$_"} @srcdirs)) .
+ "\n".
"LDFLAGS = -mno-cygwin -s\n".
&splitline("RCFLAGS = \$(RCINC) --define WIN32=1 --define _WIN32=1".
- " --define WINVER=0x0400 --define MINGW32_FIX=1")."\n".
+ " --define WINVER=0x0400")."\n".
"\n".
- ".SUFFIXES:\n".
- "\n".
- "%.o: %.c\n".
- "\t\$(CC) \$(COMPAT) \$(FWHACK) \$(XFLAGS) \$(CFLAGS) -c \$<\n".
+ $makefile_extra{'cygwin'}->{'vars'} .
"\n".
- "%.res.o: %.rc\n".
- "\t\$(RC) \$(FWHACK) \$(RCFL) \$(RCFLAGS) \$< \$\@\n".
+ ".SUFFIXES:\n".
"\n";
- print &splitline("all:" . join "", map { " $_.exe" } &progrealnames("GC"));
+ print &splitline("all:" . join "", map { " $_.exe" } &progrealnames("G:C"));
print "\n\n";
- foreach $p (&prognames("GC")) {
+ foreach $p (&prognames("G:C")) {
($prog, $type) = split ",", $p;
$objstr = &objects($p, "X.o", "X.res.o", undef);
print &splitline($prog . ".exe: " . $objstr), "\n";
"-Wl,-Map,$prog.map " .
$objstr . " $libstr", 69), "\n\n";
}
- foreach $d (&deps("X.o", "X.res.o", "", "/")) {
- print &splitline(sprintf("%s: %s", $d->{obj}, join " ", @{$d->{deps}})),
- "\n";
+ foreach $d (&deps("X.o", "X.res.o", $dirpfx, "/", "cygwin")) {
+ if ($forceobj{$d->{obj_orig}}) {
+ printf ("%s: FORCE\n", $d->{obj});
+ } else {
+ print &splitline(sprintf("%s: %s", $d->{obj},
+ join " ", @{$d->{deps}})), "\n";
+ }
+ if ($d->{obj} =~ /\.res\.o$/) {
+ print "\t\$(RC) \$(RCFL) \$(RCFLAGS) ".$d->{deps}->[0]." ".$d->{obj}."\n\n";
+ } else {
+ print "\t\$(CC) \$(COMPAT) \$(XFLAGS) \$(CFLAGS) -c ".$d->{deps}->[0]."\n\n";
+ }
}
print "\n";
- print $makefile_extra{'cygwin'};
+ print $makefile_extra{'cygwin'}->{'end'};
print "\nclean:\n".
"\trm -f *.o *.exe *.res.o *.map\n".
- "\n";
+ "\n".
+ "FORCE:\n";
select STDOUT; close OUT;
}
##-- Borland makefile
if (defined $makefiles{'borland'}) {
+ $dirpfx = &dirpfx($makefiles{'borland'}, "\\");
+
%stdlibs = ( # Borland provides many Win32 API libraries intrinsically
"advapi32" => 1,
"comctl32" => 1,
"#\n# This file was created by `mkfiles.pl' from the `Recipe' file.\n".
"# DO NOT EDIT THIS FILE DIRECTLY; edit Recipe or mkfiles.pl instead.\n";
# bcc32 command line option is -D not /D
- ($_ = $help) =~ s/=\/D/=-D/gs;
+ ($_ = $help) =~ s/([=" ])\/D/\1-D/gs;
print $_;
print
"\n".
"MAKEFILE = Makefile.bor\n".
"\n".
"# C compilation flags\n".
- "CFLAGS = -D_WINDOWS -DWINVER=0x0401\n".
+ "CFLAGS = -D_WINDOWS -DWINVER=0x0500\n".
+ "# Resource compilation flags\n".
+ "RCFLAGS = -DNO_WINRESRC_H -DWIN32 -D_WIN32 -DWINVER=0x0401\n".
"\n".
"# Get include directory for resource compiler\n".
"!if !\$d(BCB)\n".
"BCB = \$(MAKEDIR)\\..\n".
"!endif\n".
"\n".
+ $makefile_extra{'borland'}->{'vars'} .
+ "\n".
".c.obj:\n".
- &splitline("\tbcc32 -w-aus -w-ccc -w-par -w-pia \$(COMPAT) \$(FWHACK)".
- " \$(XFLAGS) \$(CFLAGS) /c \$*.c",69)."\n".
+ &splitline("\tbcc32 -w-aus -w-ccc -w-par -w-pia \$(COMPAT)".
+ " \$(XFLAGS) \$(CFLAGS) ".
+ (join " ", map {"-I$dirpfx$_"} @srcdirs) .
+ " /c \$*.c",69)."\n".
".rc.res:\n".
- &splitline("\tbrcc32 \$(FWHACK) \$(RCFL) -i \$(BCB)\\include -r".
- " -DNO_WINRESRC_H -DWIN32 -D_WIN32 -DWINVER=0x0401 \$*.rc",69)."\n".
+ &splitline("\tbrcc32 \$(RCFL) -i \$(BCB)\\include -r".
+ " \$(RCFLAGS) \$*.rc",69)."\n".
"\n";
- print &splitline("all:" . join "", map { " $_.exe" } &progrealnames("GC"));
+ print &splitline("all:" . join "", map { " $_.exe" } &progrealnames("G:C"));
print "\n\n";
- foreach $p (&prognames("GC")) {
+ foreach $p (&prognames("G:C")) {
($prog, $type) = split ",", $p;
$objstr = &objects($p, "X.obj", "X.res", undef);
print &splitline("$prog.exe: " . $objstr . " $prog.rsp"), "\n";
my $ap = ($type eq "G") ? "-aa" : "-ap";
print "\tilink32 $ap -Gn -L\$(BCB)\\lib \@$prog.rsp\n\n";
}
- foreach $p (&prognames("GC")) {
+ foreach $p (&prognames("G:C")) {
($prog, $type) = split ",", $p;
print $prog, ".rsp: \$(MAKEFILE)\n";
$objstr = &objects($p, "X.obj", undef, undef);
print "\techo " . &objects($p, undef, "X.res", undef) . " >> $prog.rsp\n";
print "\n";
}
- foreach $d (&deps("X.obj", "X.res", "", "\\")) {
- print &splitline(sprintf("%s: %s", $d->{obj}, join " ", @{$d->{deps}})),
- "\n";
+ foreach $d (&deps("X.obj", "X.res", $dirpfx, "\\", "borland")) {
+ if ($forceobj{$d->{obj_orig}}) {
+ printf("%s: FORCE\n", $d->{obj});
+ } else {
+ print &splitline(sprintf("%s: %s", $d->{obj},
+ join " ", @{$d->{deps}})), "\n";
+ }
}
print "\n";
- print $makefile_extra{'borland'};
+ print $makefile_extra{'borland'}->{'end'};
print "\nclean:\n".
"\t-del *.obj\n".
"\t-del *.exe\n".
"\t-del *.pdb\n".
"\t-del *.rsp\n".
"\t-del *.tds\n".
- "\t-del *.\$\$\$\$\$\$\n";
+ "\t-del *.\$\$\$\$\$\$\n".
+ "\n".
+ "FORCE:\n".
+ "\t-rem dummy command\n";
select STDOUT; close OUT;
}
if (defined $makefiles{'vc'}) {
+ $dirpfx = &dirpfx($makefiles{'vc'}, "\\");
+
##-- Visual C++ makefile
open OUT, ">$makefiles{'vc'}"; select OUT;
print
"MAKEFILE = Makefile.vc\n".
"\n".
"# C compilation flags\n".
- "CFLAGS = /nologo /W3 /O1 /D_WINDOWS /D_WIN32_WINDOWS=0x401 /DWINVER=0x401\n".
+ "CFLAGS = /nologo /W3 /O1 " .
+ (join " ", map {"-I$dirpfx$_"} @srcdirs) .
+ " /D_WINDOWS /D_WIN32_WINDOWS=0x500 /DWINVER=0x500\n".
"LFLAGS = /incremental:no /fixed\n".
+ "RCFLAGS = -DWIN32 -D_WIN32 -DWINVER=0x0400\n".
+ "\n".
+ $makefile_extra{'vc'}->{'vars'} .
"\n".
- ".c.obj:\n".
- "\tcl \$(COMPAT) \$(FWHACK) \$(XFLAGS) \$(CFLAGS) /c \$*.c\n".
- ".rc.res:\n".
- "\trc \$(FWHACK) \$(RCFL) -r -DWIN32 -D_WIN32 -DWINVER=0x0400 \$*.rc\n".
"\n";
- print &splitline("all:" . join "", map { " $_.exe" } &progrealnames("GC"));
+ print &splitline("all:" . join "", map { " $_.exe" } &progrealnames("G:C"));
print "\n\n";
- foreach $p (&prognames("GC")) {
+ foreach $p (&prognames("G:C")) {
($prog, $type) = split ",", $p;
$objstr = &objects($p, "X.obj", "X.res", undef);
print &splitline("$prog.exe: " . $objstr . " $prog.rsp"), "\n";
print "\tlink \$(LFLAGS) -out:$prog.exe -map:$prog.map \@$prog.rsp\n\n";
}
- foreach $p (&prognames("GC")) {
+ foreach $p (&prognames("G:C")) {
($prog, $type) = split ",", $p;
print $prog, ".rsp: \$(MAKEFILE)\n";
$objstr = &objects($p, "X.obj", "X.res", "X.lib");
}
print "\n";
}
- foreach $d (&deps("X.obj", "X.res", "", "\\")) {
- print &splitline(sprintf("%s: %s", $d->{obj}, join " ", @{$d->{deps}})),
- "\n";
+ foreach $d (&deps("X.obj", "X.res", $dirpfx, "\\", "vc")) {
+ $extradeps = $forceobj{$d->{obj_orig}} ? ["*.c","*.h","*.rc"] : [];
+ print &splitline(sprintf("%s: %s", $d->{obj},
+ join " ", @$extradeps, @{$d->{deps}})), "\n";
+ if ($d->{obj} =~ /.obj$/) {
+ print "\tcl \$(COMPAT) \$(XFLAGS) \$(CFLAGS) /c ".$d->{deps}->[0],"\n\n";
+ } else {
+ print "\trc \$(RCFL) -r \$(RCFLAGS) ".$d->{deps}->[0],"\n\n";
+ }
}
print "\n";
- print $makefile_extra{'vc'};
+ print $makefile_extra{'vc'}->{'end'};
print "\nclean: tidy\n".
"\t-del *.exe\n\n".
"tidy:\n".
}
if (defined $makefiles{'vcproj'}) {
+ $dirpfx = &dirpfx($makefiles{'vcproj'}, "\\");
$orig_dir = cwd;
mkdir $makefiles{'vcproj'}
if(! -d $makefiles{'vcproj'});
chdir $makefiles{'vcproj'};
- @deps = &deps("X.obj", "X.res", "", "\\");
+ @deps = &deps("X.obj", "X.res", $dirpfx, "\\", "vcproj");
%all_object_deps = map {$_->{obj} => $_->{deps}} @deps;
# Create the project files
# Get names of all Windows projects (GUI and console)
- my @prognames = &prognames("GC");
+ my @prognames = &prognames("G:C");
foreach $progname (@prognames) {
- create_project(\%all_object_deps, $progname);
+ create_vc_project(\%all_object_deps, $progname);
}
# Create the workspace file
open OUT, ">$project_name.dsw"; binmode OUT; select OUT;
select STDOUT; close OUT;
chdir $orig_dir;
- sub create_project {
+ sub create_vc_project {
my ($all_object_deps, $progname) = @_;
# Construct program's dependency info
%seen_objects = ();
"# PROP Intermediate_Dir \"Release\"\r\n".
"# PROP Ignore_Export_Lib 0\r\n".
"# PROP Target_Dir \"\"\r\n".
- "# ADD BASE CPP /nologo /W3 /GX /O2 /D \"WIN32\" /D \"NDEBUG\" /D \"_WINDOWS\" /D \"_MBCS\" /YX /FD /c\r\n".
- "# ADD CPP /nologo /W3 /GX /O2 /D \"WIN32\" /D \"NDEBUG\" /D \"_WINDOWS\" /D \"_MBCS\" /YX /FD /c\r\n".
+ "# ADD BASE CPP /nologo /W3 /GX /O2 ".
+ (join " ", map {"/I \"..\\..\\$dirpfx$_\""} @srcdirs) .
+ " /D \"WIN32\" /D \"NDEBUG\" /D \"_WINDOWS\" /D \"_MBCS\" /YX /FD /c\r\n".
+ "# ADD CPP /nologo /W3 /GX /O2 ".
+ (join " ", map {"/I \"..\\..\\$dirpfx$_\""} @srcdirs) .
+ " /D \"WIN32\" /D \"NDEBUG\" /D \"_WINDOWS\" /D \"_MBCS\" /YX /FD /c\r\n".
"# ADD BASE MTL /nologo /D \"NDEBUG\" /mktyplib203 /win32\r\n".
"# ADD MTL /nologo /D \"NDEBUG\" /mktyplib203 /win32\r\n".
"# ADD BASE RSC /l 0x809 /d \"NDEBUG\"\r\n".
"# PROP Intermediate_Dir \"Debug\"\r\n".
"# PROP Ignore_Export_Lib 0\r\n".
"# PROP Target_Dir \"\"\r\n".
- "# ADD BASE CPP /nologo /W3 /Gm /GX /ZI /Od /D \"WIN32\" /D \"_DEBUG\" /D \"_WINDOWS\" /D \"_MBCS\" /YX /FD /GZ /c\r\n".
- "# ADD CPP /nologo /W3 /Gm /GX /ZI /Od /D \"WIN32\" /D \"_DEBUG\" /D \"_WINDOWS\" /D \"_MBCS\" /YX /FD /GZ /c\r\n".
+ "# ADD BASE CPP /nologo /W3 /Gm /GX /ZI /Od ".
+ (join " ", map {"/I \"..\\..\\$dirpfx$_\""} @srcdirs) .
+ " /D \"WIN32\" /D \"_DEBUG\" /D \"_WINDOWS\" /D \"_MBCS\" /YX /FD /GZ /c\r\n".
+ "# ADD CPP /nologo /W3 /Gm /GX /ZI /Od ".
+ (join " ", map {"/I \"..\\..\\$dirpfx$_\""} @srcdirs) .
+ " /D \"WIN32\" /D \"_DEBUG\" /D \"_WINDOWS\" /D \"_MBCS\" /YX /FD /GZ /c\r\n".
"# ADD BASE MTL /nologo /D \"_DEBUG\" /mktyplib203 /win32\r\n".
"# ADD MTL /nologo /D \"_DEBUG\" /mktyplib203 /win32\r\n".
"# ADD BASE RSC /l 0x809 /d \"_DEBUG\"\r\n".
}
if (defined $makefiles{'gtk'}) {
+ $dirpfx = &dirpfx($makefiles{'gtk'}, "/");
##-- X/GTK/Unix makefile
open OUT, ">$makefiles{'gtk'}"; select OUT;
"#\n# This file was created by `mkfiles.pl' from the `Recipe' file.\n".
"# DO NOT EDIT THIS FILE DIRECTLY; edit Recipe or mkfiles.pl instead.\n";
# gcc command line option is -D not /D
- ($_ = $help) =~ s/=\/D/=-D/gs;
+ ($_ = $help) =~ s/([=" ])\/D/\1-D/gs;
print $_;
print
"\n".
"# TOOLPATH = /opt/gcc/bin\n".
"CC = \$(TOOLPATH)cc\n".
"\n".
- &splitline("CFLAGS = -O2 -Wall -Werror -g -I. -I.. -I../charset `gtk-config --cflags`")."\n".
+ &splitline("CFLAGS = -O2 -Wall -Werror -g " .
+ (join " ", map {"-I$dirpfx$_"} @srcdirs) .
+ " `gtk-config --cflags`").
+ " -D _FILE_OFFSET_BITS=64\n".
"XLDFLAGS = `gtk-config --libs`\n".
"ULDFLAGS =#\n".
"INSTALL=install\n",
"mandir=\$(prefix)/man\n",
"man1dir=\$(mandir)/man1\n",
"\n".
+ $makefile_extra{'gtk'}->{'vars'} .
+ "\n".
".SUFFIXES:\n".
"\n".
- "%.o:\n".
- "\t\$(CC) \$(COMPAT) \$(FWHACK) \$(XFLAGS) \$(CFLAGS) -c \$<\n".
"\n";
- print &splitline("all:" . join "", map { " $_" } &progrealnames("XU"));
+ print &splitline("all:" . join "", map { " $_" } &progrealnames("X:U"));
print "\n\n";
- foreach $p (&prognames("XU")) {
+ foreach $p (&prognames("X:U")) {
($prog, $type) = split ",", $p;
$objstr = &objects($p, "X.o", undef, undef);
print &splitline($prog . ": " . $objstr), "\n";
print &splitline("\t\$(CC)" . $mw . " \$(${type}LDFLAGS) -o \$@ " .
$objstr . " $libstr", 69), "\n\n";
}
- foreach $d (&deps("X.o", undef, "../", "/")) {
- print &splitline(sprintf("%s: %s", $d->{obj}, join " ", @{$d->{deps}})),
- "\n";
+ foreach $d (&deps("X.o", undef, $dirpfx, "/", "gtk")) {
+ if ($forceobj{$d->{obj_orig}}) {
+ printf("%s: FORCE\n", $d->{obj});
+ } else {
+ print &splitline(sprintf("%s: %s", $d->{obj},
+ join " ", @{$d->{deps}})), "\n";
+ }
+ print &splitline("\t\$(CC) \$(COMPAT) \$(XFLAGS) \$(CFLAGS) -c $d->{deps}->[0]\n");
+ }
+ print "\n";
+ print $makefile_extra{'gtk'}->{'end'};
+ print "\nclean:\n".
+ "\trm -f *.o". (join "", map { " $_" } &progrealnames("X:U")) . "\n";
+ print "\nFORCE:\n";
+ select STDOUT; close OUT;
+}
+
+if (defined $makefiles{'ac'}) {
+ $dirpfx = &dirpfx($makefiles{'ac'}, "/");
+
+ ##-- Unix/autoconf makefile
+ open OUT, ">$makefiles{'ac'}"; select OUT;
+ print
+ "# Makefile.in for $project_name under Unix with Autoconf.\n".
+ "#\n# This file was created by `mkfiles.pl' from the `Recipe' file.\n".
+ "# DO NOT EDIT THIS FILE DIRECTLY; edit Recipe or mkfiles.pl instead.\n";
+ # gcc command line option is -D not /D
+ ($_ = $help) =~ s/([=" ])\/D/\1-D/gs;
+ print $_;
+ print
+ "\n".
+ "CC = \@CC\@\n".
+ "\n".
+ &splitline("CFLAGS = \@CFLAGS\@ \@CPPFLAGS\@ \@DEFS\@ \@GTK_CFLAGS\@ " .
+ (join " ", map {"-I$dirpfx$_"} @srcdirs))."\n".
+ "XLDFLAGS = \@LDFLAGS\@ \@LIBS\@ \@GTK_LIBS\@\n".
+ "ULDFLAGS = \@LDFLAGS\@ \@LIBS\@\n".
+ "INSTALL=\@INSTALL\@\n",
+ "INSTALL_PROGRAM=\$(INSTALL)\n",
+ "INSTALL_DATA=\$(INSTALL)\n",
+ "prefix=\@prefix\@\n",
+ "exec_prefix=\@exec_prefix\@\n",
+ "bindir=\@bindir\@\n",
+ "mandir=\@mandir\@\n",
+ "man1dir=\$(mandir)/man1\n",
+ "\n".
+ $makefile_extra{'gtk'}->{'vars'} .
+ "\n".
+ ".SUFFIXES:\n".
+ "\n".
+ "\n".
+ "all: \@all_targets\@\n".
+ &splitline("all-cli:" . join "", map { " $_" } &progrealnames("U"))."\n".
+ &splitline("all-gtk:" . join "", map { " $_" } &progrealnames("X"))."\n";
+ print "\n";
+ foreach $p (&prognames("X:U")) {
+ ($prog, $type) = split ",", $p;
+ $objstr = &objects($p, "X.o", undef, undef);
+ print &splitline($prog . ": " . $objstr), "\n";
+ $libstr = &objects($p, undef, undef, "-lX");
+ print &splitline("\t\$(CC)" . $mw . " \$(${type}LDFLAGS) -o \$@ " .
+ $objstr . " $libstr", 69), "\n\n";
+ }
+ foreach $d (&deps("X.o", undef, $dirpfx, "/", "gtk")) {
+ if ($forceobj{$d->{obj_orig}}) {
+ printf("%s: FORCE\n", $d->{obj});
+ } else {
+ print &splitline(sprintf("%s: %s", $d->{obj},
+ join " ", @{$d->{deps}})), "\n";
+ }
+ print &splitline("\t\$(CC) \$(COMPAT) \$(XFLAGS) \$(CFLAGS) -c $d->{deps}->[0]\n");
}
print "\n";
- print $makefile_extra{'gtk'};
+ print $makefile_extra{'gtk'}->{'end'};
print "\nclean:\n".
- "\trm -f *.o". (join "", map { " $_" } &progrealnames("XU")) . "\n";
+ "\trm -f *.o". (join "", map { " $_" } &progrealnames("X:U")) . "\n";
+ print "\nFORCE:\n";
select STDOUT; close OUT;
}
"# Makefile for $project_name under MPW.\n#\n".
"# This file was created by `mkfiles.pl' from the `Recipe' file.\n".
"# DO NOT EDIT THIS FILE DIRECTLY; edit Recipe or mkfiles.pl instead.\n";
- # MPW command line option is -d not /D
- ($_ = $help) =~ s/=\/D/=-d /gs;
+ # MPW command line option is -d not /D (FIXME further massaging?)
+ ($_ = $help) =~ s/([=" ])\/D/\1-d /gs;
print $_;
print "\n\n".
"ROptions = `Echo \"{VER}\" | StreamEdit -e \"1,\$ replace /=(\xc5)\xa81\xb0/ 'STR=\xb6\xb6\xb6\xb6\xb6\"' \xa81 '\xb6\xb6\xb6\xb6\xb6\"'\"`".
}
}
- foreach $d (&deps("", "X.rsrc", "::", ":")) {
+ foreach $d (&deps("", "X.rsrc", "::", ":", "mpw")) {
next unless $d->{obj};
print &splitline(sprintf("%s \xc4 %s", $d->{obj}, join " ", @{$d->{deps}}),
undef, "\xb6"), "\n";
print "\tRez ", $d->{deps}->[0], " -o {Targ} {ROptions}\n\n";
}
foreach $arch (qw(68K CFM68K)) {
- foreach $d (&deps("X.\L$arch\E.o", "", "::", ":")) {
+ foreach $d (&deps("X.\L$arch\E.o", "", "::", ":", "mpw")) {
next unless $d->{obj};
print &splitline(sprintf("%s \xc4 %s", $d->{obj},
join " ", @{$d->{deps}}),
}
}
foreach $arch (qw(PPC Carbon)) {
- foreach $d (&deps("X.\L$arch\E.o", "", "::", ":")) {
+ foreach $d (&deps("X.\L$arch\E.o", "", "::", ":", "mpw")) {
next unless $d->{obj};
print &splitline(sprintf("%s \xc4 %s", $d->{obj},
join " ", @{$d->{deps}}),
}
if (defined $makefiles{'lcc'}) {
+ $dirpfx = &dirpfx($makefiles{'lcc'}, "\\");
+
##-- lcc makefile
open OUT, ">$makefiles{'lcc'}"; select OUT;
print
"#\n# This file was created by `mkfiles.pl' from the `Recipe' file.\n".
"# DO NOT EDIT THIS FILE DIRECTLY; edit Recipe or mkfiles.pl instead.\n";
# lcc command line option is -D not /D
- ($_ = $help) =~ s/=\/D/=-D/gs;
+ ($_ = $help) =~ s/([=" ])\/D/\1-D/gs;
print $_;
print
"\n".
"MAKEFILE = Makefile.lcc\n".
"\n".
"# C compilation flags\n".
- "CFLAGS = -D_WINDOWS\n".
+ "CFLAGS = -D_WINDOWS " .
+ (join " ", map {"-I$dirpfx$_"} @srcdirs) .
+ "\n".
+ "# Resource compilation flags\n".
+ "RCFLAGS = \n".
"\n".
"# Get include directory for resource compiler\n".
"\n".
- ".c.obj:\n".
- &splitline("\tlcc -O -p6 \$(COMPAT) \$(FWHACK)".
- " \$(XFLAGS) \$(CFLAGS) \$*.c",69)."\n".
- ".rc.res:\n".
- &splitline("\tlrc \$(FWHACK) \$(RCFL) -r \$*.rc",69)."\n".
+ $makefile_extra{'lcc'}->{'vars'} .
"\n";
- print &splitline("all:" . join "", map { " $_.exe" } &progrealnames("GC"));
+ print &splitline("all:" . join "", map { " $_.exe" } &progrealnames("G:C"));
print "\n\n";
- foreach $p (&prognames("GC")) {
+ foreach $p (&prognames("G:C")) {
($prog, $type) = split ",", $p;
$objstr = &objects($p, "X.obj", "X.res", undef);
print &splitline("$prog.exe: " . $objstr ), "\n";
print "\n\n";
}
- foreach $d (&deps("X.obj", "X.res", "", "\\")) {
- print &splitline(sprintf("%s: %s", $d->{obj}, join " ", @{$d->{deps}})),
- "\n";
+ foreach $d (&deps("X.obj", "X.res", $dirpfx, "\\", "lcc")) {
+ if ($forceobj{$d->{obj_orig}}) {
+ printf("%s: FORCE\n", $d->{obj});
+ } else {
+ print &splitline(sprintf("%s: %s", $d->{obj},
+ join " ", @{$d->{deps}})), "\n";
+ }
+ if ($d->{obj} =~ /\.obj$/) {
+ print &splitline("\tlcc -O -p6 \$(COMPAT)".
+ " \$(XFLAGS) \$(CFLAGS) ".$d->{deps}->[0],69)."\n";
+ } else {
+ print &splitline("\tlrc \$(RCFL) -r \$(RCFLAGS) ".
+ $d->{deps}->[0],69)."\n";
+ }
}
print "\n";
- print $makefile_extra{'lcc'};
+ print $makefile_extra{'lcc'}->{'end'};
print "\nclean:\n".
"\t-del *.obj\n".
"\t-del *.exe\n".
- "\t-del *.res\n";
+ "\t-del *.res\n".
+ "\n".
+ "FORCE:\n";
+
+ select STDOUT; close OUT;
+}
+
+if (defined $makefiles{'osx'}) {
+ $dirpfx = &dirpfx($makefiles{'osx'}, "/");
+ ##-- Mac OS X makefile
+ open OUT, ">$makefiles{'osx'}"; select OUT;
+ print
+ "# Makefile for $project_name under Mac OS X.\n".
+ "#\n# This file was created by `mkfiles.pl' from the `Recipe' file.\n".
+ "# DO NOT EDIT THIS FILE DIRECTLY; edit Recipe or mkfiles.pl instead.\n";
+ # gcc command line option is -D not /D
+ ($_ = $help) =~ s/([=" ])\/D/\1-D/gs;
+ print $_;
+ print
+ "CC = \$(TOOLPATH)gcc\n".
+ "\n".
+ &splitline("CFLAGS = -O2 -Wall -Werror -g " .
+ (join " ", map {"-I$dirpfx$_"} @srcdirs))."\n".
+ "MLDFLAGS = -framework Cocoa\n".
+ "ULDFLAGS =\n".
+ "\n" .
+ $makefile_extra{'osx'}->{'vars'} .
+ "\n" .
+ &splitline("all:" . join "", map { " $_" } &progrealnames("MX:U")) .
+ "\n";
+ foreach $p (&prognames("MX")) {
+ ($prog, $type) = split ",", $p;
+ $objstr = &objects($p, "X.o", undef, undef);
+ $icon = &special($p, ".icns");
+ $infoplist = &special($p, "info.plist");
+ print "${prog}.app:\n\tmkdir -p \$\@\n";
+ print "${prog}.app/Contents: ${prog}.app\n\tmkdir -p \$\@\n";
+ print "${prog}.app/Contents/MacOS: ${prog}.app/Contents\n\tmkdir -p \$\@\n";
+ $targets = "${prog}.app/Contents/MacOS/$prog";
+ if (defined $icon) {
+ print "${prog}.app/Contents/Resources: ${prog}.app/Contents\n\tmkdir -p \$\@\n";
+ print "${prog}.app/Contents/Resources/${prog}.icns: ${prog}.app/Contents/Resources $icon\n\tcp $icon \$\@\n";
+ $targets .= " ${prog}.app/Contents/Resources/${prog}.icns";
+ }
+ if (defined $infoplist) {
+ print "${prog}.app/Contents/Info.plist: ${prog}.app/Contents/Resources $infoplist\n\tcp $infoplist \$\@\n";
+ $targets .= " ${prog}.app/Contents/Info.plist";
+ }
+ $targets .= " \$(${prog}_extra)";
+ print &splitline("${prog}: $targets", 69) . "\n\n";
+ print &splitline("${prog}.app/Contents/MacOS/$prog: ".
+ "${prog}.app/Contents/MacOS " . $objstr), "\n";
+ $libstr = &objects($p, undef, undef, "-lX");
+ print &splitline("\t\$(CC)" . $mw . " \$(MLDFLAGS) -o \$@ " .
+ $objstr . " $libstr", 69), "\n\n";
+ }
+ foreach $p (&prognames("U")) {
+ ($prog, $type) = split ",", $p;
+ $objstr = &objects($p, "X.o", undef, undef);
+ print &splitline($prog . ": " . $objstr), "\n";
+ $libstr = &objects($p, undef, undef, "-lX");
+ print &splitline("\t\$(CC)" . $mw . " \$(ULDFLAGS) -o \$@ " .
+ $objstr . " $libstr", 69), "\n\n";
+ }
+ foreach $d (&deps("X.o", undef, $dirpfx, "/")) {
+ if ($forceobj{$d->{obj_orig}}) {
+ printf("%s: FORCE\n", $d->{obj});
+ } else {
+ print &splitline(sprintf("%s: %s", $d->{obj},
+ join " ", @{$d->{deps}})), "\n";
+ }
+ $firstdep = $d->{deps}->[0];
+ if ($firstdep =~ /\.c$/) {
+ print "\t\$(CC) \$(COMPAT) \$(FWHACK) \$(XFLAGS) \$(CFLAGS) -c \$<\n";
+ } elsif ($firstdep =~ /\.m$/) {
+ print "\t\$(CC) -x objective-c \$(COMPAT) \$(FWHACK) \$(XFLAGS) \$(CFLAGS) -c \$<\n";
+ }
+ }
+ print "\n".$makefile_extra{'osx'}->{'end'};
+ print "\nclean:\n".
+ "\trm -f *.o *.dmg". (join "", map { " $_" } &progrealnames("U")) . "\n".
+ "\trm -rf *.app\n";
+ "\n".
+ "FORCE:\n";
select STDOUT; close OUT;
}
+
+if (defined $makefiles{'devcppproj'}) {
+ $dirpfx = &dirpfx($makefiles{'devcppproj'}, "\\");
+ $orig_dir = cwd;
+
+ ##-- Dev-C++ 5 projects
+ #
+ # Note: All files created in this section are written in binary
+ # mode to prevent any posibility of misinterpreted line endings.
+ # I don't know if Dev-C++ is as touchy as MSVC with LF-only line
+ # endings. But however, CRLF line endings are the common way on
+ # Win32 machines where Dev-C++ is running.
+ # Hence, in order for mkfiles.pl to generate CRLF project files
+ # even when run from Unix, I make sure all files are binary and
+ # explicitly write the CRLFs.
+ #
+ # Create directories if necessary
+ mkdir $makefiles{'devcppproj'}
+ if(! -d $makefiles{'devcppproj'});
+ chdir $makefiles{'devcppproj'};
+ @deps = &deps("X.obj", "X.res", $dirpfx, "\\", "devcppproj");
+ %all_object_deps = map {$_->{obj} => $_->{deps}} @deps;
+ # Make dir names FAT/NTFS compatible
+ my @srcdirs = @srcdirs;
+ for ($i=0; $i<@srcdirs; $i++) {
+ $srcdirs[$i] =~ s/\//\\/g;
+ $srcdirs[$i] =~ s/\\$//;
+ }
+ # Create the project files
+ # Get names of all Windows projects (GUI and console)
+ my @prognames = &prognames("G:C");
+ foreach $progname (@prognames) {
+ create_devcpp_project(\%all_object_deps, $progname);
+ }
+
+ sub create_devcpp_project {
+ my ($all_object_deps, $progname) = @_;
+ # Construct program's dependency info (Taken from 'vcproj', seems to work right here, too.)
+ %seen_objects = ();
+ %lib_files = ();
+ %source_files = ();
+ %header_files = ();
+ %resource_files = ();
+ @object_files = split " ", &objects($progname, "X.obj", "X.res", "X.lib");
+ foreach $object_file (@object_files) {
+ next if defined $seen_objects{$object_file};
+ $seen_objects{$object_file} = 1;
+ if($object_file =~ /\.lib$/io) {
+ $lib_files{$object_file} = 1;
+ next;
+ }
+ $object_deps = $all_object_deps{$object_file};
+ foreach $object_dep (@$object_deps) {
+ if($object_dep =~ /\.c$/io) {
+ $source_files{$object_dep} = 1;
+ next;
+ }
+ if($object_dep =~ /\.h$/io) {
+ $header_files{$object_dep} = 1;
+ next;
+ }
+ if($object_dep =~ /\.(rc|ico)$/io) {
+ $resource_files{$object_dep} = 1;
+ next;
+ }
+ }
+ }
+ $libs = join " ", sort keys %lib_files;
+ @source_files = sort keys %source_files;
+ @header_files = sort keys %header_files;
+ @resources = sort keys %resource_files;
+ ($windows_project, $type) = split ",", $progname;
+ mkdir $windows_project
+ if(! -d $windows_project);
+ chdir $windows_project;
+
+ $subsys = ($type eq "G") ? "0" : "1"; # 0 = Win32 GUI, 1 = Win32 Console
+ open OUT, ">$windows_project.dev"; binmode OUT; select OUT;
+ print
+ "# DEV-C++ 5 Project File - $windows_project.dev\r\n".
+ "# ** DO NOT EDIT **\r\n".
+ "\r\n".
+ # No difference between DEBUG and RELEASE here as in 'vcproj', because
+ # Dev-C++ does not support mutiple compilation profiles in one single project.
+ # (At least I can say this for Dev-C++ 5 Beta)
+ "[Project]\r\n".
+ "FileName=$windows_project.dev\r\n".
+ "Name=$windows_project\r\n".
+ "Ver=1\r\n".
+ "IsCpp=1\r\n".
+ "Type=$subsys\r\n".
+ # Multimon is disabled here, as Dev-C++ (Version 5 Beta) does not have multimon.h
+ "Compiler=-W -D__GNUWIN32__ -DWIN32 -DNDEBUG -D_WINDOWS -DNO_MULTIMON -D_MBCS_\@\@_\r\n".
+ "CppCompiler=-W -D__GNUWIN32__ -DWIN32 -DNDEBUG -D_WINDOWS -DNO_MULTIMON -D_MBCS_\@\@_\r\n".
+ "Includes=" . (join ";", map {"..\\..\\$dirpfx$_"} @srcdirs) . "\r\n".
+ "Linker=-ladvapi32 -lcomctl32 -lcomdlg32 -lgdi32 -limm32 -lshell32 -luser32 -lwinmm -lwinspool_\@\@_\r\n".
+ "Libs=\r\n".
+ "UnitCount=" . (@source_files + @header_files + @resources) . "\r\n".
+ "Folders=\"Header Files\",\"Resource Files\",\"Source Files\"\r\n".
+ "ObjFiles=\r\n".
+ "PrivateResource=${windows_project}_private.rc\r\n".
+ "ResourceIncludes=..\\..\\..\\WINDOWS\r\n".
+ "MakeIncludes=\r\n".
+ "Icon=\r\n". # It's ok to leave this blank.
+ "ExeOutput=\r\n".
+ "ObjectOutput=\r\n".
+ "OverrideOutput=0\r\n".
+ "OverrideOutputName=$windows_project.exe\r\n".
+ "HostApplication=\r\n".
+ "CommandLine=\r\n".
+ "UseCustomMakefile=0\r\n".
+ "CustomMakefile=\r\n".
+ "IncludeVersionInfo=0\r\n".
+ "SupportXPThemes=0\r\n".
+ "CompilerSet=0\r\n".
+ "CompilerSettings=0000000000000000000000\r\n".
+ "\r\n";
+ $unit_count = 1;
+ foreach $source_file (@source_files) {
+ print
+ "[Unit$unit_count]\r\n".
+ "FileName=..\\..\\$source_file\r\n".
+ "Folder=Source Files\r\n".
+ "Compile=1\r\n".
+ "CompileCpp=0\r\n".
+ "Link=1\r\n".
+ "Priority=1000\r\n".
+ "OverrideBuildCmd=0\r\n".
+ "BuildCmd=\r\n".
+ "\r\n";
+ $unit_count++;
+ }
+ foreach $header_file (@header_files) {
+ print
+ "[Unit$unit_count]\r\n".
+ "FileName=..\\..\\$header_file\r\n".
+ "Folder=Header Files\r\n".
+ "Compile=1\r\n".
+ "CompileCpp=1\r\n". # Dev-C++ want's to compile all header files with both compilers C and C++. It does not hurt.
+ "Link=1\r\n".
+ "Priority=1000\r\n".
+ "OverrideBuildCmd=0\r\n".
+ "BuildCmd=\r\n".
+ "\r\n";
+ $unit_count++;
+ }
+ foreach $resource_file (@resources) {
+ if ($resource_file =~ /.*\.(ico|cur|bmp|dlg|rc2|rct|bin|rgs|gif|jpg|jpeg|jpe)/io) { # Default filter as in 'vcproj'
+ $Compile = "0"; # Don't compile images and other binary resource files
+ $CompileCpp = "0";
+ } else {
+ $Compile = "1";
+ $CompileCpp = "1"; # Dev-C++ want's to compile all .rc files with both compilers C and C++. It does not hurt.
+ }
+ print
+ "[Unit$unit_count]\r\n".
+ "FileName=..\\..\\$resource_file\r\n".
+ "Folder=Resource Files\r\n".
+ "Compile=$Compile\r\n".
+ "CompileCpp=$CompileCpp\r\n".
+ "Link=0\r\n".
+ "Priority=1000\r\n".
+ "OverrideBuildCmd=0\r\n".
+ "BuildCmd=\r\n".
+ "\r\n";
+ $unit_count++;
+ }
+ #Note: By default, [VersionInfo] is not used.
+ print
+ "[VersionInfo]\r\n".
+ "Major=0\r\n".
+ "Minor=0\r\n".
+ "Release=1\r\n".
+ "Build=1\r\n".
+ "LanguageID=1033\r\n".
+ "CharsetID=1252\r\n".
+ "CompanyName=\r\n".
+ "FileVersion=0.1\r\n".
+ "FileDescription=\r\n".
+ "InternalName=\r\n".
+ "LegalCopyright=\r\n".
+ "LegalTrademarks=\r\n".
+ "OriginalFilename=$windows_project.exe\r\n".
+ "ProductName=$windows_project\r\n".
+ "ProductVersion=0.1\r\n".
+ "AutoIncBuildNr=0\r\n";
+ select STDOUT; close OUT;
+ chdir "..";
+ }
+}