-\versionid $Id: config.but,v 1.82 2004/06/15 11:11:19 jacob Exp $
+\versionid $Id: config.but,v 1.90 2004/09/22 22:15:25 jacob Exp $
\C{config} Configuring PuTTY
\b The \q{Protocol} radio buttons let you choose what type of
connection you want to make: a raw connection, a Telnet connection, an
rlogin connection or an SSH connection. (See \k{which-one} for a
-summary of the differences between SSH, Telnet and rlogin.)
+summary of the differences between SSH, Telnet and rlogin, and
+\k{using-rawprot} for an explanation of \q{raw} connections.)
\b The \q{Port} box lets you specify which port number on the server
to connect to. If you select Telnet, Rlogin, or SSH, this box will
be filled in automatically to the usual value, and you will only
need to change it if you have an unusual server. If you select Raw
-mode (see \k{using-rawprot}), you will almost certainly need to fill
-in the \q{Port} box.
+mode, you will almost certainly need to fill in the \q{Port} box.
\S{config-saving} Loading and storing saved sessions
The \q{Lines of scrollback} box lets you configure how many lines of
text PuTTY keeps. The \q{Display scrollbar} options allow you to
hide the scrollbar (although you can still view the scrollback using
-Shift-PgUp and Shift-PgDn). You can separately configure whether the
-scrollbar is shown in full-screen mode and in normal modes.
+the keyboard as described in \k{using-scrollback}). You can separately
+configure whether the scrollbar is shown in full-screen mode and in
+normal modes.
If you are viewing part of the scrollback when the server sends more
text to PuTTY, the screen will revert to showing the current
The format is a pair of numbers separated by a comma, for instance,
\c{38400,38400}. The first number represents the output speed
-(\e{from} the server), and the second is the input speed (\e{to} the
-server). (Only the first is used in the Rlogin protocol.)
+(\e{from} the server) in bits per second, and the second is the input
+speed (\e{to} the server). (Only the first is used in the Rlogin
+protocol.)
This option has no effect on Raw connections.
server.
Keepalives are only supported in Telnet and SSH; the Rlogin and Raw
-protocols offer no way of implementing them.
+protocols offer no way of implementing them. (For an alternative, see
+\k{config-tcp-keepalives}.)
Note that if you are using SSH1 and the server has a bug that makes
it unable to deal with SSH1 ignore messages (see
The Nagle algorithm is disabled by default.
+\S{config-tcp-keepalives} \q{Enable TCP keepalives}
+
+\cfg{winhelp-topic}{connection.tcpkeepalive}
+
+\e{NOTE:} TCP keepalives should not be confused with the
+application-level keepalives described in \k{config-keepalive}. If in
+doubt, you probably want application-level keepalives; TCP keepalives
+are provided for completeness.
+
+The idea of TCP keepalives is similar to application-level keepalives,
+and the same caveats apply. The main differences are:
+
+\b TCP keepalives are available on \e{all} connection types, including
+Raw and Rlogin.
+
+\b The interval between TCP keepalives is usually much longer,
+typically two hours; this is set by the operating system, and cannot
+be configured within PuTTY.
+
+\b If the operating system does not receive a response to a keepalive,
+it may send out more in quick succession and if terminate the connection
+if no response is received.
+
+TCP keepalives may be more useful for ensuring that half-open connections
+are terminated than for keeping a connection alive.
+
+TCP keepalives are disabled by default.
+
\H{config-proxy} The Proxy panel
\cfg{winhelp-topic}{proxy.main}
\b Username and password authentication is supported for HTTP
proxies and SOCKS 5 proxies.
+\lcont{
+
+\b With SOCKS 5, authentication is via \i{CHAP} if the proxy
+supports it (this is not supported in \i{PuTTYtel}); otherwise the
+password is sent to the proxy in plain text.
+
+\b With HTTP proxying, the only currently supported authentication
+method is \q{basic}, where the password is sent to the proxy in plain
+text.
+
+}
+
\b SOCKS 4 can use the \q{Username} field, but does not support
passwords.
you have confusing trouble with a firewall, you could try enabling
passive mode to see if it helps.
-\S{config-telnetkey} \q{Keyboard sends telnet Backspace and Interrupt}
+\S{config-telnetkey} \q{Keyboard sends Telnet special commands}
\cfg{winhelp-topic}{telnet.specialkeys}
-If this box is checked, the Backspace key on the keyboard will send
-the Telnet special backspace code, and Control-C will send the
-Telnet special interrupt code. You probably shouldn't enable this
+If this box is checked, several key sequences will have their normal
+actions modified:
+
+\b the Backspace key on the keyboard will send the \I{Erase Character,
+Telnet special command}Telnet special backspace code;
+
+\b Control-C will send the Telnet special \I{Interrupt Process, Telnet
+special command}Interrupt Process code;
+
+\b Control-Z will send the Telnet special \I{Suspend Process, Telnet
+special command}Suspend Process code.
+
+You probably shouldn't enable this
unless you know what you're doing.
-\S{config-telnetnl} \q{Return key sends telnet New Line instead of ^M}
+\S{config-telnetnl} \q{Return key sends Telnet New Line instead of ^M}
\cfg{winhelp-topic}{telnet.newline}