-\versionid $Id: faq.but,v 1.16 2001/12/29 17:00:06 simon Exp $
+\versionid $Id: faq.but,v 1.20 2002/02/04 13:52:05 simon Exp $
\A{faq} PuTTY FAQ
v2 if your server supports both, go to the SSH panel and change the
\e{Preferred SSH protocol version} option.
-Public key authentication (both RSA and DSA) in SSH v2 has been
-added since version 0.51.
+Public key authentication (both RSA and DSA) in SSH v2 is new in
+version 0.52.
\S{faq-ssh2-keyfmt}{Question} Does PuTTY support reading OpenSSH or
\cw{ssh.com} SSHv2 private key files?
\S{faq-localecho}{Question} Does PuTTY support local echo?
-Yes.
+Yes. Version 0.52 has proper support for local echo.
-In version 0.51 and before, local echo cannot be separated from
+In version 0.51 and before, local echo could not be separated from
local line editing (where you type a line of text locally, and it is
not sent to the server until you press Return, so you have the
chance to edit it and correct mistakes \e{before} the server sees
-it). The two features can be enabled and disabled from the Terminal
-panel, using the checkbox marked \q{Use local terminal line
-discipline}. Note that due to a bug in those versions of PuTTY,
-changing this feature in mid-session will have no effect; you have
-to enable it \e{before} you open the connection.
-
-In later versions, local echo and local line editing are separate
-options, and by default PuTTY will try to determine automatically
-whether to enable them or not, based on which protocol you have
-selected and also based on hints from the server. If you have a
-problem with PuTTY's default choice, you can force each option to be
-enabled or disabled as you choose. The controls are in the Terminal
-panel, in the section marked \q{Line discipline options}.
+it). New in version 0.52, local echo and local line editing are
+separate options, and by default PuTTY will try to determine
+automatically whether to enable them or not, based on which protocol
+you have selected and also based on hints from the server. If you
+have a problem with PuTTY's default choice, you can force each
+option to be enabled or disabled as you choose. The controls are in
+the Terminal panel, in the section marked \q{Line discipline
+options}.
\S{faq-disksettings}{Question} Does PuTTY support storing its
settings in a disk file?
\S{faq-fullscreen}{Question} Does PuTTY support full-screen mode,
like a DOS box?
-Not in the 0.51 release, but it has been added since then.
+Yes; this is a new feature in version 0.52.
\S{faq-password-remember}{Question} Does PuTTY have the ability to
remember my password so I don't have to type it every time?
have time, and we don't have motivation. The code is available if
anyone else wants to try it.
+\S{faq-pscp-ascii}{Question} Can PSCP or PSFTP transfer files in
+ASCII mode?
+
+Unfortunately not. This is a limitation of the file transfer
+protocols: the SCP and SFTP protocols have no notion of transferring
+a file in anything other than binary mode.
+
+SFTP is designed to be extensible, so it's possible that an
+extension might be proposed at some later date that implements ASCII
+transfer. But the PuTTY team can't do anything about it until that
+happens.
+
\H{faq-ports} Ports to other operating systems
The eventual goal is for PuTTY to be a multi-platform program, able
Mode is universal and shouldn't need to be specified once for each
platform.
+\S{faq-ports-general}{Question} What ports of PuTTY exist?
+
+Currently, PuTTY only runs on full Win32 systems. This includes
+Windows 95, 98, and ME, and it includes Windows NT, Windows 2000 and
+Windows XP.
+
+It does \e{not} include Windows CE (see \k{faq-wince}), and it does
+not quite include the Win32s environment under Windows 3.1 (see
+\k{faq-win31}).
+
+We do not have ports for any other systems at the present time. If
+anyone told you we had a Unix port, or an iPaq port, or any other
+port of PuTTY, they were mistaken. We don't.
+
\S{faq-wince}{Question} Will there be a port to Windows CE?
Probably not in the particularly near future. Despite sharing large
\S{faq-term}{Question} What terminal type does PuTTY use?
For most purposes, PuTTY can be considered to be an \cw{xterm}
-terminal, although full support for some of \cw{xterm}'s features,
-such as passing mouse actions to the server-side program, is not
-present in the 0.51 release (but has been added since).
+terminal.
PuTTY also supports some terminal control sequences not supported by
the real \cw{xterm}: notably the Linux console sequences that
\S{faq-tunnels}{Question} How do I use X forwarding and port
forwarding? I can't find the Tunnels panel.
-If you're looking in the 0.51 release or earlier, the Tunnels panel
-isn't there. It was added in the development snapshots after 0.51,
-and releases 0.52 and onwards will contain it.
+This is a new feature in version 0.52. You should upgrade.
\S{faq-options}{Question} How do I use all PuTTY's features (public
keys, port forwarding, SSH v2, etc.) in PSCP, PSFTP and Plink?
constructs the MACs correctly by default, and hence these old
servers will fail to work with it.
-If you are using PuTTY version 0.51 or below, go to the SSH panel
-and check the box labelled \q{Imitate SSH 2 MAC bug}. This will
-cause PuTTY to construct its MACs in the same incorrect manner as
-the buggy servers, so it will be able to work with them.
+If you are using PuTTY version 0.52 or better, this should work
+automatically: PuTTY should detect the buggy servers from their
+version number announcement, and automatically start to construct
+its MACs in the same incorrect manner as they do, so it will be able
+to work with them.
-Since version 0.51, PuTTY has been enhanced to detect buggy servers
-automatically (when they announce their version) and enable the
-workaround without the user needing to ask. Therefore you \e{should}
-never have to use this option again after 0.52, but it is still
-provided just in case another buggy server shows up.
+If you are using PuTTY version 0.51 or below, you can enable the
+workaround by going to the SSH panel and ticking the box labelled
+\q{Imitate SSH 2 MAC bug}. It's possible that you might have to do
+this with 0.52 as well, if a buggy server exists that PuTTY doesn't
+know about.
In this context MAC stands for Message Authentication Code. It's a
cryptographic term, and it has nothing at all to do with Ethernet
MAC (Media Access Control) addresses.
+\S{faq-pscp-protocol}{Question} Why do I see \q{Fatal: Protocol
+error: Expected control record} in PSCP?
+
+This happens because PSCP was expecting to see data from the server
+that was part of the PSCP protocol exchange, and instead it saw data
+that it couldn't make any sense of at all.
+
+This almost always happens because the startup scripts in your
+account on the server machine are generating output. This is
+impossible for PSCP, or any other SCP client, to work around. You
+should never use startup files (\c{.bashrc}, \c{.cshrc} and so on)
+which generate output in non-interactive sessions.
+
+This is not actually a PuTTY problem. If PSCP fails in this way,
+then all other SCP clients are likely to fail in exactly the same
+way. The problem is at the server end.
+
\S{faq-colours}{Question} I clicked on a colour in the Colours
panel, and the colour didn't change in my terminal.
repeated one hour after the start of the connection, and PuTTY will
get this wrong.
-The bug has been fixed since version 0.51, so upgrading to a later
-version or snapshot should solve the problem.
+Upgrade to version 0.52 and the problem should go away.
\S{faq-outofmem}{Question} After trying to establish an SSH 2
connection, PuTTY says \q{Out of memory} and dies.
\S{faq-altgr}{Question} I can't type characters that require the
AltGr key.
-In PuTTY version 0.51, the AltGr key was broken. The bug has been
-fixed since then.
+In PuTTY version 0.51, the AltGr key was broken. Upgrade to version
+0.52.
\S{faq-idleout}{Question} My PuTTY sessions unexpectedly close after
they are idle for a while.
something worthwhile, ask us first. If you don't like these terms,
feel perfectly free not to donate. We don't mind.
+\S{faq-sillyputty}{Question} Where can I buy silly putty?
+
+You're looking at the wrong web site; the only PuTTY we know about
+here is the name of a computer program.
+
+If you want the kind of putty you can buy as an executive toy, the
+PuTTY team can personally recommend Thinking Putty, which you can
+buy from Crazy Aaron's Putty World, at
+\W{http://www.puttyworld.com}\cw{www.puttyworld.com}.
+
\S{faq-pronounce}{Question} How do I pronounce PuTTY?
Exactly like the normal word \q{putty}. Just like the stuff you put
projects / u / mdw / putty / blobdiff