/* ----------------------------------------------------------------------
* The meat of the `get' and `put' commands.
*/
-int sftp_get_file(char *fname, char *outfname, int recurse, int restart)
+int sftp_get_file(char *fname, char *outfname, int recurse, int restart,
+ char *wildcard)
{
struct fxp_handle *fh;
struct sftp_packet *pktin;
* (If we're not in recursive mode, we need not even check: the
* subsequent FXP_OPEN will return a usable error message.)
*/
- if (recurse) {
+ if (wildcard || recurse) {
struct fxp_attrs attrs;
int result;
- sftp_register(req = fxp_stat_send(fname));
- rreq = sftp_find_request(pktin = sftp_recv());
- assert(rreq == req);
- result = fxp_stat_recv(pktin, rreq, &attrs);
- if (result &&
- (attrs.flags & SSH_FILEXFER_ATTR_PERMISSIONS) &&
- (attrs.permissions & 0040000)) {
+ if (!wildcard) {
+ sftp_register(req = fxp_stat_send(fname));
+ rreq = sftp_find_request(pktin = sftp_recv());
+ assert(rreq == req);
+ result = fxp_stat_recv(pktin, rreq, &attrs);
+ } else
+ result = 0; /* placate optimisers */
+
+ if (wildcard ||
+ (result &&
+ (attrs.flags & SSH_FILEXFER_ATTR_PERMISSIONS) &&
+ (attrs.permissions & 0040000))) {
struct fxp_handle *dirhandle;
int nnames, namesize;
/*
* First, attempt to create the destination directory,
- * unless it already exists.
+ * unless it already exists (or this is a wildcard
+ * run).
*/
- if (file_type(outfname) != FILE_TYPE_DIRECTORY &&
+ if (!wildcard &&
+ file_type(outfname) != FILE_TYPE_DIRECTORY &&
!create_directory(outfname)) {
printf("%s: Cannot create directory\n", outfname);
return 0;
ournames = sresize(ournames, namesize, struct fxp_name *);
}
for (i = 0; i < names->nnames; i++)
- if (!is_dots(names->names[i].filename))
+ if (!is_dots(names->names[i].filename) &&
+ (!wildcard || wc_match(wildcard,
+ names->names[i].filename)))
ournames[nnames++] = fxp_dup_name(&names->names[i]);
fxp_free_names(names);
}
fxp_close_recv(pktin, rreq);
/*
+ * A polite warning if nothing at all matched the
+ * wildcard.
+ */
+ if (wildcard && !nnames) {
+ printf("%s: nothing matched\n", wildcard);
+ }
+
+ /*
* Sort the names into a clear order. This ought to
* make things more predictable when we're doing a
* reget of the same directory, just in case two
while (i < nnames) {
char *nextoutfname;
int ret;
- nextoutfname = dir_file_cat(outfname, ournames[i]->filename);
+ if (outfname)
+ nextoutfname = dir_file_cat(outfname,
+ ournames[i]->filename);
+ else
+ nextoutfname = dupstr(ournames[i]->filename);
ret = (file_type(nextoutfname) == FILE_TYPE_NONEXISTENT);
sfree(nextoutfname);
if (ret)
int ret;
nextfname = dupcat(fname, "/", ournames[i]->filename, NULL);
- nextoutfname = dir_file_cat(outfname, ournames[i]->filename);
- ret = sftp_get_file(nextfname, nextoutfname, recurse, restart);
+ if (outfname)
+ nextoutfname = dir_file_cat(outfname,
+ ournames[i]->filename);
+ else
+ nextoutfname = dupstr(ournames[i]->filename);
+ ret = sftp_get_file(nextfname, nextoutfname,
+ recurse, restart, NULL);
restart = FALSE; /* after first partial file, do full */
sfree(nextoutfname);
sfree(nextfname);
return ret;
}
-int sftp_put_file(char *fname, char *outfname, int recurse, int restart)
+int sftp_put_file(char *fname, char *outfname, int recurse, int restart,
+ char *wildcard)
{
struct fxp_handle *fh;
struct fxp_xfer *xfer;
* (If we're not in recursive mode, we need not even check: the
* subsequent fopen will return an error message.)
*/
- if (recurse && file_type(fname) == FILE_TYPE_DIRECTORY) {
+ if (wildcard || (recurse && file_type(fname) == FILE_TYPE_DIRECTORY)) {
struct fxp_attrs attrs;
int result;
int nnames, namesize;
DirHandle *dh;
int i;
- /*
- * First, attempt to create the destination directory,
- * unless it already exists.
- */
- sftp_register(req = fxp_stat_send(outfname));
- rreq = sftp_find_request(pktin = sftp_recv());
- assert(rreq == req);
- result = fxp_stat_recv(pktin, rreq, &attrs);
- if (!result ||
- !(attrs.flags & SSH_FILEXFER_ATTR_PERMISSIONS) ||
- !(attrs.permissions & 0040000)) {
- sftp_register(req = fxp_mkdir_send(outfname));
+ if (!wildcard) {
+ /*
+ * First, attempt to create the destination directory,
+ * unless it already exists.
+ */
+ sftp_register(req = fxp_stat_send(outfname));
rreq = sftp_find_request(pktin = sftp_recv());
assert(rreq == req);
- result = fxp_mkdir_recv(pktin, rreq);
+ result = fxp_stat_recv(pktin, rreq, &attrs);
+ if (!result ||
+ !(attrs.flags & SSH_FILEXFER_ATTR_PERMISSIONS) ||
+ !(attrs.permissions & 0040000)) {
+ sftp_register(req = fxp_mkdir_send(outfname));
+ rreq = sftp_find_request(pktin = sftp_recv());
+ assert(rreq == req);
+ result = fxp_mkdir_recv(pktin, rreq);
- if (!result) {
- printf("%s: create directory: %s\n", outfname, fxp_error());
- return 0;
+ if (!result) {
+ printf("%s: create directory: %s\n",
+ outfname, fxp_error());
+ return 0;
+ }
}
}
/*
* Now get the list of filenames in the local directory.
*/
- dh = open_directory(fname);
- if (!dh) {
- printf("%s: unable to open directory\n", fname);
- return 0;
- }
nnames = namesize = 0;
ournames = NULL;
- while ((name = read_filename(dh)) != NULL) {
- if (nnames >= namesize) {
- namesize += 128;
- ournames = sresize(ournames, namesize, char *);
+ if (wildcard) {
+ WildcardMatcher *wcm;
+
+ wcm = begin_wildcard_matching(wildcard);
+ if (wcm) {
+ while ((name = wildcard_get_filename(wcm)) != NULL) {
+ if (nnames >= namesize) {
+ namesize += 128;
+ ournames = sresize(ournames, namesize, char *);
+ }
+ ournames[nnames++] = name;
+ }
+ finish_wildcard_matching(wcm);
+ }
+ } else {
+ dh = open_directory(fname);
+ if (!dh) {
+ printf("%s: unable to open directory\n", fname);
+ return 0;
}
- ournames[nnames++] = name;
+ while ((name = read_filename(dh)) != NULL) {
+ if (nnames >= namesize) {
+ namesize += 128;
+ ournames = sresize(ournames, namesize, char *);
+ }
+ ournames[nnames++] = name;
+ }
+ close_directory(dh);
+ }
+
+ /*
+ * A polite warning if nothing at all matched the
+ * wildcard.
+ */
+ if (wildcard && !nnames) {
+ printf("%s: nothing matched\n", wildcard);
}
- close_directory(dh);
/*
* Sort the names into a clear order. This ought to make
char *nextfname, *nextoutfname;
int ret;
- nextfname = dir_file_cat(fname, ournames[i]);
+ if (fname)
+ nextfname = dir_file_cat(fname, ournames[i]);
+ else
+ nextfname = dupstr(ournames[i]);
nextoutfname = dupcat(outfname, "/", ournames[i], NULL);
- ret = sftp_put_file(nextfname, nextoutfname, recurse, restart);
+ ret = sftp_put_file(nextfname, nextoutfname,
+ recurse, restart, NULL);
restart = FALSE; /* after first partial file, do full */
sfree(nextoutfname);
sfree(nextfname);
}
/*
- * Get a file and save it at the local end. We have two very
- * similar commands here: `get' and `reget', which differ in that
- * `reget' checks for the existence of the destination file and
- * starts from where a previous aborted transfer left off.
+ * Get a file and save it at the local end. We have three very
+ * similar commands here. The basic one is `get'; `reget' differs
+ * in that it checks for the existence of the destination file and
+ * starts from where a previous aborted transfer left off; `mget'
+ * differs in that it interprets all its arguments as files to
+ * transfer (never as a different local name for a remote file) and
+ * can handle wildcards.
*/
-int sftp_general_get(struct sftp_command *cmd, int restart)
+int sftp_general_get(struct sftp_command *cmd, int restart, int multiple)
{
- char *fname, *origfname, *outfname;
+ char *fname, *unwcfname, *origfname, *outfname;
int i, ret;
int recurse = FALSE;
return 0;
}
- origfname = cmd->words[i++];
- fname = canonify(origfname);
- if (!fname) {
- printf("%s: %s\n", origfname, fxp_error());
- return 0;
- }
+ do {
+ unwcfname = NULL;
+ origfname = cmd->words[i++];
- outfname = (i >= cmd->nwords ?
- stripslashes(origfname, 0) : cmd->words[i++]);
+ if (multiple &&
+ !wc_unescape(unwcfname = snewn(strlen(origfname)+1, char),
+ origfname)) {
+ ret = sftp_get_file(pwd, NULL, recurse, restart, origfname);
+ } else {
+ fname = canonify(origfname);
+ if (!fname) {
+ printf("%s: %s\n", origfname, fxp_error());
+ sfree(unwcfname);
+ return 0;
+ }
- ret = sftp_get_file(fname, outfname, recurse, restart);
+ if (!multiple && i < cmd->nwords)
+ outfname = cmd->words[i++];
+ else
+ outfname = stripslashes(origfname, 1);
- sfree(fname);
+ ret = sftp_get_file(fname, outfname, recurse, restart, NULL);
+
+ sfree(fname);
+ }
+ sfree(unwcfname);
+ if (!ret)
+ return ret;
+
+ } while (multiple && i < cmd->nwords);
return ret;
}
int sftp_cmd_get(struct sftp_command *cmd)
{
- return sftp_general_get(cmd, 0);
+ return sftp_general_get(cmd, 0, 0);
+}
+int sftp_cmd_mget(struct sftp_command *cmd)
+{
+ return sftp_general_get(cmd, 0, 1);
}
int sftp_cmd_reget(struct sftp_command *cmd)
{
- return sftp_general_get(cmd, 1);
+ return sftp_general_get(cmd, 1, 0);
}
/*
- * Send a file and store it at the remote end. We have two very
- * similar commands here: `put' and `reput', which differ in that
- * `reput' checks for the existence of the destination file and
- * starts from where a previous aborted transfer left off.
+ * Send a file and store it at the remote end. We have three very
+ * similar commands here. The basic one is `put'; `reput' differs
+ * in that it checks for the existence of the destination file and
+ * starts from where a previous aborted transfer left off; `mput'
+ * differs in that it interprets all its arguments as files to
+ * transfer (never as a different remote name for a local file) and
+ * can handle wildcards.
*/
-int sftp_general_put(struct sftp_command *cmd, int restart)
+int sftp_general_put(struct sftp_command *cmd, int restart, int multiple)
{
char *fname, *origoutfname, *outfname;
int i, ret;
return 0;
}
- fname = cmd->words[i++];
- origoutfname = (i >= cmd->nwords ?
- stripslashes(fname, 1) : cmd->words[i++]);
- outfname = canonify(origoutfname);
- if (!outfname) {
- printf("%s: %s\n", origoutfname, fxp_error());
- return 0;
- }
+ do {
+ fname = cmd->words[i++];
- ret = sftp_put_file(fname, outfname, recurse, restart);
+ if (multiple && test_wildcard(fname, FALSE) == WCTYPE_WILDCARD) {
+ ret = sftp_put_file(NULL, pwd, recurse, restart, fname);
+ } else {
+ if (!multiple && i < cmd->nwords)
+ origoutfname = cmd->words[i++];
+ else
+ origoutfname = stripslashes(fname, 1);
+
+ outfname = canonify(origoutfname);
+ if (!outfname) {
+ printf("%s: %s\n", origoutfname, fxp_error());
+ return 0;
+ }
+ ret = sftp_put_file(fname, outfname, recurse, restart, NULL);
+ sfree(outfname);
+ }
+ if (!ret)
+ return ret;
- sfree(outfname);
+ } while (multiple && i < cmd->nwords);
return ret;
}
int sftp_cmd_put(struct sftp_command *cmd)
{
- return sftp_general_put(cmd, 0);
+ return sftp_general_put(cmd, 0, 0);
+}
+int sftp_cmd_mput(struct sftp_command *cmd)
+{
+ return sftp_general_put(cmd, 0, 1);
}
int sftp_cmd_reput(struct sftp_command *cmd)
{
- return sftp_general_put(cmd, 1);
+ return sftp_general_put(cmd, 1, 0);
}
int sftp_cmd_mkdir(struct sftp_command *cmd)
sftp_cmd_ls
},
{
+ "mget", TRUE, "download multiple files at once",
+ " <filename-or-wildcard> [ <filename-or-wildcard>... ]\n"
+ " Downloads many files from the server, storing each one under\n"
+ " the same name it has on the server side. You can use wildcards\n"
+ " such as \"*.c\" to specify lots of files at once.\n",
+ sftp_cmd_mget
+ },
+ {
"mkdir", TRUE, "create a directory on the remote server",
" <directory-name>\n"
" Creates a directory with the given name on the server.\n",
sftp_cmd_mkdir
},
{
+ "mput", TRUE, "upload multiple files at once",
+ " <filename-or-wildcard> [ <filename-or-wildcard>... ]\n"
+ " Uploads many files to the server, storing each one under the\n"
+ " same name it has on the client side. You can use wildcards\n"
+ " such as \"*.c\" to specify lots of files at once.\n",
+ sftp_cmd_mput
+ },
+ {
"mv", TRUE, "move or rename a file on the remote server",
" <source-filename> <destination-filename>\n"
" Moves or renames the file <source-filename> on the server,\n"
projects / u / mdw / putty / blobdiff