Major destabilisation, phase 2. This time it's the backends' turn:
[u/mdw/putty] / scp.c
diff --git a/scp.c b/scp.c
index bde4cda..25f29b4 100644 (file)
--- a/scp.c
+++ b/scp.c
        ((*(LONGLONG*)&(ft)) / (LONGLONG) 10000000 - (LONGLONG) 11644473600))
 
 /* GUI Adaptation - Sept 2000 */
+
+/* This is just a base value from which the main message numbers are
+ * derived. */
 #define   WM_APP_BASE          0x8000
+
+/* These two pass a single character value in wParam. They represent
+ * the visible output from PSCP. */
 #define   WM_STD_OUT_CHAR      ( WM_APP_BASE+400 )
 #define   WM_STD_ERR_CHAR      ( WM_APP_BASE+401 )
+
+/* These pass a transfer status update. WM_STATS_CHAR passes a single
+ * character in wParam, and is called repeatedly to pass the name of
+ * the file, terminated with "\n". WM_STATS_SIZE passes the size of
+ * the file being transferred in wParam. WM_STATS_ELAPSED is called
+ * to pass the elapsed time (in seconds) in wParam, and
+ * WM_STATS_PERCENT passes the percentage of the transfer which is
+ * complete, also in wParam. */
 #define   WM_STATS_CHAR                ( WM_APP_BASE+402 )
 #define   WM_STATS_SIZE        ( WM_APP_BASE+403 )
 #define   WM_STATS_PERCENT     ( WM_APP_BASE+404 )
 #define   WM_STATS_ELAPSED     ( WM_APP_BASE+405 )
+
+/* These are used at the end of a run to pass an error code in
+ * wParam: zero means success, nonzero means failure. WM_RET_ERR_CNT
+ * is used after a copy, and WM_LS_RET_ERR_CNT is used after a file
+ * list operation. */
 #define   WM_RET_ERR_CNT       ( WM_APP_BASE+406 )
 #define   WM_LS_RET_ERR_CNT    ( WM_APP_BASE+407 )
+
+/* More transfer status update messages. WM_STATS_DONE passes the
+ * number of bytes sent so far in wParam. WM_STATS_ETA passes the
+ * estimated time to completion (in seconds). WM_STATS_RATEBS passes
+ * the average transfer rate (in bytes per second). */
 #define   WM_STATS_DONE                ( WM_APP_BASE+408 )
 #define   WM_STATS_ETA         ( WM_APP_BASE+409 )
 #define   WM_STATS_RATEBS      ( WM_APP_BASE+410 )
@@ -59,10 +83,8 @@ static int recursive = 0;
 static int preserve = 0;
 static int targetshouldbedirectory = 0;
 static int statistics = 1;
-static int portnumber = 0;
 static int prev_stats_len = 0;
 static int scp_unsafe_mode = 0;
-static char *password = NULL;
 static int errs = 0;
 /* GUI Adaptation - Sept 2000 */
 #define NAME_STR_MAX 2048
@@ -212,6 +234,29 @@ void fatalbox(char *fmt, ...)
 
     cleanup_exit(1);
 }
+void modalfatalbox(char *fmt, ...)
+{
+    char str[0x100];                  /* Make the size big enough */
+    va_list ap;
+    va_start(ap, fmt);
+    strcpy(str, "Fatal: ");
+    vsprintf(str + strlen(str), fmt, ap);
+    va_end(ap);
+    strcat(str, "\n");
+    tell_str(stderr, str);
+    errs++;
+
+    if (gui_mode) {
+       unsigned int msg_id = WM_RET_ERR_CNT;
+       if (list)
+           msg_id = WM_LS_RET_ERR_CNT;
+       while (!PostMessage
+              ((HWND) atoi(gui_hwnd), msg_id, (WPARAM) errs,
+               0 /*lParam */ ))SleepEx(1000, TRUE);
+    }
+
+    cleanup_exit(1);
+}
 void connection_fatal(char *fmt, ...)
 {
     char str[0x100];                  /* Make the size big enough */
@@ -263,7 +308,7 @@ static unsigned char *outptr;              /* where to put the data */
 static unsigned outlen;                       /* how much data required */
 static unsigned char *pending = NULL;  /* any spare data */
 static unsigned pendlen = 0, pendsize = 0;     /* length and phys. size of buffer */
-int from_backend(int is_stderr, char *data, int datalen)
+int from_backend(void *frontend, int is_stderr, char *data, int datalen)
 {
     unsigned char *p = (unsigned char *) data;
     unsigned len = (unsigned) datalen;
@@ -363,7 +408,7 @@ static void ssh_scp_init(void)
 {
     if (scp_ssh_socket == INVALID_SOCKET)
        return;
-    while (!back->sendok()) {
+    while (!back->sendok(backhandle)) {
        fd_set readfds;
        FD_ZERO(&readfds);
        FD_SET(scp_ssh_socket, &readfds);
@@ -371,7 +416,7 @@ static void ssh_scp_init(void)
            return;                    /* doom */
        select_result((WPARAM) scp_ssh_socket, (LPARAM) FD_READ);
     }
-    using_sftp = !ssh_fallback_cmd;
+    using_sftp = !ssh_fallback_cmd(backhandle);
 }
 
 /*
@@ -389,9 +434,9 @@ static void bump(char *fmt, ...)
     tell_str(stderr, str);
     errs++;
 
-    if (back != NULL && back->socket() != NULL) {
+    if (back != NULL && back->socket(backhandle) != NULL) {
        char ch;
-       back->special(TS_EOF);
+       back->special(backhandle, TS_EOF);
        ssh_scp_recv(&ch, 1);
     }
 
@@ -425,10 +470,23 @@ static void do_cmd(char *host, char *user, char *cmd)
        do_defaults(NULL, &cfg);
        strncpy(cfg.host, host, sizeof(cfg.host) - 1);
        cfg.host[sizeof(cfg.host) - 1] = '\0';
-       cfg.port = 22;
     }
 
     /*
+     * Force use of SSH. (If they got the protocol wrong we assume the
+     * port is useless too.)
+     */
+    if (cfg.protocol != PROT_SSH) {
+        cfg.protocol = PROT_SSH;
+        cfg.port = 22;
+    }
+
+    /*
+     * Enact command-line overrides.
+     */
+    cmdline_run_saved();
+
+    /*
      * Trim leading whitespace off the hostname if it's there.
      */
     {
@@ -454,6 +512,21 @@ static void do_cmd(char *host, char *user, char *cmd)
      */
     cfg.host[strcspn(cfg.host, ":")] = '\0';
 
+    /*
+     * Remove any remaining whitespace from the hostname.
+     */
+    {
+       int p1 = 0, p2 = 0;
+       while (cfg.host[p2] != '\0') {
+           if (cfg.host[p2] != ' ' && cfg.host[p2] != '\t') {
+               cfg.host[p1] = cfg.host[p2];
+               p1++;
+           }
+           p2++;
+       }
+       cfg.host[p1] = '\0';
+    }
+
     /* Set username */
     if (user != NULL && user[0] != '\0') {
        strncpy(cfg.username, user, sizeof(cfg.username) - 1);
@@ -471,12 +544,6 @@ static void do_cmd(char *host, char *user, char *cmd)
        free(user);
     }
 
-    if (cfg.protocol != PROT_SSH)
-       cfg.port = 22;
-
-    if (portnumber)
-       cfg.port = portnumber;
-
     /*
      * Disable scary things which shouldn't be enabled for simple
      * things like SCP and SFTP: agent forwarding, port forwarding,
@@ -498,7 +565,7 @@ static void do_cmd(char *host, char *user, char *cmd)
 
     back = &ssh_backend;
 
-    err = back->init(cfg.host, cfg.port, &realhost, 0);
+    err = back->init(NULL, &backhandle, cfg.host, cfg.port, &realhost, 0);
     if (err != NULL)
        bump("ssh_init: %s", err);
     ssh_scp_init();
@@ -645,7 +712,7 @@ int sftp_recvdata(char *buf, int len)
 }
 int sftp_senddata(char *buf, int len)
 {
-    back->send((unsigned char *) buf, len);
+    back->send(backhandle, (unsigned char *) buf, len);
     return 1;
 }
 
@@ -666,6 +733,12 @@ void scp_sftp_listdir(char *dirname)
     int nnames, namesize;
     int i;
 
+    if (!fxp_init()) {
+       tell_user(stderr, "unable to initialise SFTP: %s", fxp_error());
+       errs++;
+       return;
+    }
+
     printf("Listing directory %s\n", dirname);
 
     dirh = fxp_opendir(dirname);
@@ -748,6 +821,12 @@ void scp_source_setup(char *target, int shouldbedir)
         */
        struct fxp_attrs attrs;
 
+       if (!fxp_init()) {
+           tell_user(stderr, "unable to initialise SFTP: %s", fxp_error());
+           errs++;
+           return;
+       }
+
        if (!fxp_stat(target, &attrs) ||
            !(attrs.flags & SSH_FILEXFER_ATTR_PERMISSIONS))
            scp_sftp_targetisdir = 0;
@@ -771,8 +850,8 @@ int scp_send_errmsg(char *str)
     if (using_sftp) {
        /* do nothing; we never need to send our errors to the server */
     } else {
-       back->send("\001", 1);         /* scp protocol error prefix */
-       back->send(str, strlen(str));
+       back->send(backhandle, "\001", 1);/* scp protocol error prefix */
+       back->send(backhandle, str, strlen(str));
     }
     return 0;                         /* can't fail */
 }
@@ -787,7 +866,7 @@ int scp_send_filetimes(unsigned long mtime, unsigned long atime)
     } else {
        char buf[80];
        sprintf(buf, "T%lu 0 %lu 0\n", mtime, atime);
-       back->send(buf, strlen(buf));
+       back->send(backhandle, buf, strlen(buf));
        return response();
     }
 }
@@ -815,9 +894,9 @@ int scp_send_filename(char *name, unsigned long size, int modes)
     } else {
        char buf[40];
        sprintf(buf, "C%04o %lu ", modes, size);
-       back->send(buf, strlen(buf));
-       back->send(name, strlen(name));
-       back->send("\n", 1);
+       back->send(backhandle, buf, strlen(buf));
+       back->send(backhandle, name, strlen(name));
+       back->send(backhandle, "\n", 1);
        return response();
     }
 }
@@ -836,7 +915,7 @@ int scp_send_filedata(char *data, int len)
        scp_sftp_fileoffset = uint64_add32(scp_sftp_fileoffset, len);
        return 0;
     } else {
-       int bufsize = back->send(data, len);
+       int bufsize = back->send(backhandle, data, len);
 
        /*
         * If the network transfer is backing up - that is, the
@@ -847,7 +926,7 @@ int scp_send_filedata(char *data, int len)
        while (bufsize > MAX_SCP_BUFSIZE) {
            if (!scp_process_network_event())
                return 1;
-           bufsize = back->sendbuffer();
+           bufsize = back->sendbuffer(backhandle);
        }
 
        return 0;
@@ -874,7 +953,7 @@ int scp_send_finish(void)
        scp_has_times = 0;
        return 0;
     } else {
-       back->send("", 1);
+       back->send(backhandle, "", 1);
        return response();
     }
 }
@@ -931,9 +1010,9 @@ int scp_send_dirname(char *name, int modes)
     } else {
        char buf[40];
        sprintf(buf, "D%04o 0 ", modes);
-       back->send(buf, strlen(buf));
-       back->send(name, strlen(name));
-       back->send("\n", 1);
+       back->send(backhandle, buf, strlen(buf));
+       back->send(backhandle, name, strlen(name));
+       back->send(backhandle, "\n", 1);
        return response();
     }
 }
@@ -944,7 +1023,7 @@ int scp_send_enddir(void)
        sfree(scp_sftp_remotepath);
        return 0;
     } else {
-       back->send("E\n", 2);
+       back->send(backhandle, "E\n", 2);
        return response();
     }
 }
@@ -959,6 +1038,12 @@ int scp_sink_setup(char *source, int preserve, int recursive)
 {
     if (using_sftp) {
        char *newsource;
+
+       if (!fxp_init()) {
+           tell_user(stderr, "unable to initialise SFTP: %s", fxp_error());
+           errs++;
+           return 1;
+       }
        /*
         * It's possible that the source string we've been given
         * contains a wildcard. If so, we must split the directory
@@ -1033,7 +1118,7 @@ int scp_sink_setup(char *source, int preserve, int recursive)
 int scp_sink_init(void)
 {
     if (!using_sftp) {
-       back->send("", 1);
+       back->send(backhandle, "", 1);
     }
     return 0;
 }
@@ -1319,14 +1404,14 @@ int scp_get_sink_action(struct scp_sink_action *act)
              case '\02':                      /* fatal error */
                bump("%s", act->buf);
              case 'E':
-               back->send("", 1);
+               back->send(backhandle, "", 1);
                act->action = SCP_SINK_ENDDIR;
                return 0;
              case 'T':
                if (sscanf(act->buf, "%ld %*d %ld %*d",
                           &act->mtime, &act->atime) == 2) {
                    act->settime = 1;
-                   back->send("", 1);
+                   back->send(backhandle, "", 1);
                    continue;          /* go round again */
                }
                bump("Protocol error: Illegal time format");
@@ -1370,7 +1455,7 @@ int scp_accept_filexfer(void)
        sfree(scp_sftp_currentname);
        return 0;
     } else {
-       back->send("", 1);
+       back->send(backhandle, "", 1);
        return 0;                      /* can't fail */
     }
 }
@@ -1402,7 +1487,7 @@ int scp_finish_filerecv(void)
        fxp_close(scp_sftp_filehandle);
        return 0;
     } else {
-       back->send("", 1);
+       back->send(backhandle, "", 1);
        return response();
     }
 }
@@ -2041,8 +2126,14 @@ static void usage(void)
     printf("  -q        quiet, don't show statistics\n");
     printf("  -r        copy directories recursively\n");
     printf("  -v        show verbose messages\n");
+    printf("  -load sessname  Load settings from saved session\n");
     printf("  -P port   connect to specified port\n");
+    printf("  -l user   connect with specified username\n");
     printf("  -pw passw login with specified password\n");
+    printf("  -1 -2     force use of particular SSH protocol version\n");
+    printf("  -C        enable compression\n");
+    printf("  -i key    private key file for authentication\n");
+    printf("  -batch    disable all interactive prompts\n");
     printf("  -unsafe   allow server-side wildcards (DANGEROUS)\n");
 #if 0
     /*
@@ -2058,6 +2149,17 @@ static void usage(void)
     cleanup_exit(1);
 }
 
+void cmdline_error(char *p, ...)
+{
+    va_list ap;
+    fprintf(stderr, "pscp: ");
+    va_start(ap, p);
+    vfprintf(stderr, p, ap);
+    va_end(ap);
+    fputc('\n', stderr);
+    exit(1);
+}
+
 /*
  *  Main program (no, really?)
  */
@@ -2068,38 +2170,43 @@ int main(int argc, char *argv[])
     default_protocol = PROT_TELNET;
 
     flags = FLAG_STDERR;
+    cmdline_tooltype = TOOLTYPE_FILETRANSFER;
     ssh_get_line = &console_get_line;
     init_winsock();
     sk_init();
 
     for (i = 1; i < argc; i++) {
+       int ret;
        if (argv[i][0] != '-')
            break;
-       if (strcmp(argv[i], "-v") == 0)
-           verbose = 1, flags |= FLAG_VERBOSE;
-       else if (strcmp(argv[i], "-r") == 0)
+       ret = cmdline_process_param(argv[i], i+1<argc?argv[i+1]:NULL, 1);
+       if (ret == -2) {
+           cmdline_error("option \"%s\" requires an argument", argv[i]);
+       } else if (ret == 2) {
+           i++;               /* skip next argument */
+       } else if (ret == 1) {
+           /* We have our own verbosity in addition to `flags'. */
+           if (flags & FLAG_VERBOSE)
+               verbose = 1;
+       } else if (strcmp(argv[i], "-r") == 0) {
            recursive = 1;
-       else if (strcmp(argv[i], "-p") == 0)
+       } else if (strcmp(argv[i], "-p") == 0) {
            preserve = 1;
-       else if (strcmp(argv[i], "-q") == 0)
+       } else if (strcmp(argv[i], "-q") == 0) {
            statistics = 0;
-       else if (strcmp(argv[i], "-batch") == 0)
-           console_batch_mode = 1;
-       else if (strcmp(argv[i], "-h") == 0 || strcmp(argv[i], "-?") == 0)
+       } else if (strcmp(argv[i], "-h") == 0 || strcmp(argv[i], "-?") == 0) {
            usage();
-       else if (strcmp(argv[i], "-P") == 0 && i + 1 < argc)
-           portnumber = atoi(argv[++i]);
-       else if (strcmp(argv[i], "-pw") == 0 && i + 1 < argc)
-           console_password = argv[++i];
-       else if (strcmp(argv[i], "-gui") == 0 && i + 1 < argc) {
+       } else if (strcmp(argv[i], "-gui") == 0 && i + 1 < argc) {
            gui_hwnd = argv[++i];
            gui_mode = 1;
            console_batch_mode = TRUE;
-       } else if (strcmp(argv[i], "-ls") == 0)
+        } else if (strcmp(argv[i], "-ls") == 0) {
            list = 1;
-       else if (strcmp(argv[i], "-unsafe") == 0)
+       } else if (strcmp(argv[i], "-batch") == 0) {
+           console_batch_mode = 1;
+       } else if (strcmp(argv[i], "-unsafe") == 0) {
            scp_unsafe_mode = 1;
-       else if (strcmp(argv[i], "--") == 0) {
+       else if (strcmp(argv[i], "--") == 0) {
            i++;
            break;
        } else
@@ -2127,9 +2234,9 @@ int main(int argc, char *argv[])
            tolocal(argc, argv);
     }
 
-    if (back != NULL && back->socket() != NULL) {
+    if (back != NULL && back->socket(backhandle) != NULL) {
        char ch;
-       back->special(TS_EOF);
+       back->special(backhandle, TS_EOF);
        ssh_scp_recv(&ch, 1);
     }
     WSACleanup();