-\versionid $Id: errors.but,v 1.1 2002/10/01 16:27:36 simon Exp $
+\versionid $Id: errors.but,v 1.7 2003/07/12 13:25:43 jacob Exp $
\C{errors} Common error messages
See \k{config-ssh-encryption} for more information on this message.
+\H{errors-toomanyauth} \q{Server sent disconnect message type 2
+(SSH_DISCONNECT_PROTOCOL_ERROR): "Too many authentication failures for root"}
+
+This message is produced by an OpenSSH (or Sun SSH) server if it
+receives more failed authentication attempts than it is willing to
+tolerate. This can easily happen if you are using Pageant and have a
+large number of keys loaded into it. This can be worked around on the
+server by disabling public-key authentication or (for Sun SSH only) by
+increasing \c{MaxAuthTries} in \c{sshd_config}. Neither of these is a
+really satisfactory solution, and we hope to provide a better one in a
+future version of PuTTY.
+
\H{errors-memory} \q{Out of memory}
This occurs when PuTTY tries to allocate more memory than the system
This can happen in SSH 2, if PuTTY and the server have not enabled
encryption in the same way (see \k{faq-outofmem} in the FAQ). Some
-versions of OpenSSH have a knownq problem with this: see
+versions of OpenSSH have a known problem with this: see
\k{faq-openssh-bad-openssl}.
This can also happen in PSCP or PSFTP, if your login scripts on the
the server may have sent diagnostic messages explaining exactly what
problem it had with your setup.
+\H{errors-access-denied} \q{Access denied}, \q{Authentication refused}
+
+Various forms of this error are printed in the PuTTY window, or
+written to the PuTTY Event Log (see \k{using-eventlog}) during
+authentication.
+
+If you see one of these messages, it means that the server has refused
+all the forms of authentication PuTTY has tried and it has no further
+ideas.
+
+It may be worth checking the Event Log for diagnostic messages from
+the server giving more detail.
+
+This error can be caused by buggy SSH-1 servers that fail to cope with
+the various strategies we use for camouflaging passwords in transit.
+Upgrade your server, or use the workarounds described in
+\k{config-ssh-bug-ignore1} and possibly \k{config-ssh-bug-plainpw1}.
+
\H{errors-crc} \q{Incorrect CRC received on packet} or \q{Incorrect
MAC received on packet}
to tell from this error message whether the problem is in the client
or in the server.
-A known server problem which can cause this error is described in
-\k{faq-openssh-bad-openssl} in the FAQ.
+If you get this error, one thing you could try would be to fiddle
+with the setting of \q{Miscomputes SSH2 encryption keys} on the Bugs
+panel (see \k{config-ssh-bug-derivekey2}).
+
+Another known server problem which can cause this error is described
+in \k{faq-openssh-bad-openssl} in the FAQ.
\H{errors-x11-proxy} \q{Authentication failed at PuTTY X11 proxy}
\H{errors-connaborted} \q{Network error: Software caused connection
abort}
-In modern versions of PuTTY, you should not see this error.
-
-Windows's documentation about this error condition is not very good,
-but as far as we can tell, this error occurs when PuTTY is listening
-on a port, another program makes a connection to that port, but
-closes the connection so fast that PuTTY has no time to answer it.
-
-PuTTY only ever listens on a port when it is doing local-to-remote
-port forwarding (see \k{using-port-forwarding}); and if an incoming
-connection on that port receives this error, PuTTY should simply
-close the connection and continue without error.
+This error occurs when the Windows network code decides that your
+network connection is dead. For example, it will happen if you pull
+the network cable out of the back of an Ethernet-connected computer,
+or if Windows has any other similar reason to believe the entire
+network has become unreachable.
-If you see this error in PuTTY 0.53 or above, we would welcome a
-report of the circumstances.
+We are not aware of any reason why this error might occur that would
+represent a bug in PuTTY. The problem is between you, your Windows
+system, your network and the remote system.
\H{errors-connreset} \q{Network error: Connection reset by peer}
Check that you are connecting with the correct protocol (SSH, Telnet
or Rlogin), and check that the port number is correct. If that
fails, consult the administrator of your server.
+
+\H{errors-conntimedout} \q{Network error: Connection timed out}
+
+This error means that the network connection PuTTY tried to make to
+your server received no response at all from the server. Usually
+this happens because the server machine is completely isolated from
+the network, or because it is turned off.
+
+Check that you have correctly entered the host name or IP address of
+your server machine. If that fails, consult the administrator of
+your server.
projects / u / mdw / putty / blobdiff