}
}
+static void kexlist_handler(union control *ctrl, void *dlg,
+ void *data, int event)
+{
+ Config *cfg = (Config *)data;
+ if (event == EVENT_REFRESH) {
+ int i;
+
+ static const struct { char *s; int k; } kexes[] = {
+ { "Diffie-Hellman group 1", KEX_DHGROUP1 },
+ { "Diffie-Hellman group 14", KEX_DHGROUP14 },
+ { "Diffie-Hellman group exchange", KEX_DHGEX },
+ { "-- warn below here --", KEX_WARN }
+ };
+
+ /* Set up the "kex preference" box. */
+ /* (kexlist assumed to contain all algorithms) */
+ dlg_update_start(ctrl, dlg);
+ dlg_listbox_clear(ctrl, dlg);
+ for (i = 0; i < KEX_MAX; i++) {
+ int k = cfg->ssh_kexlist[i];
+ int j;
+ char *kstr = NULL;
+ for (j = 0; j < (sizeof kexes) / (sizeof kexes[0]); j++) {
+ if (kexes[j].k == k) {
+ kstr = kexes[j].s;
+ break;
+ }
+ }
+ dlg_listbox_addwithid(ctrl, dlg, kstr, k);
+ }
+ dlg_update_done(ctrl, dlg);
+
+ } else if (event == EVENT_VALCHANGE) {
+ int i;
+
+ /* Update array to match the list box. */
+ for (i=0; i < KEX_MAX; i++)
+ cfg->ssh_kexlist[i] = dlg_listbox_getid(ctrl, dlg, i);
+
+ }
+}
+
static void printerbox_handler(union control *ctrl, void *dlg,
void *data, int event)
{
dlg_end(dlg, 1);
} else
dlg_beep(dlg);
+ return;
}
/*
}
void setup_config_box(struct controlbox *b, struct sesslist *sesslist,
- int midsession, int protocol)
+ int midsession, int protocol, int protcfginfo)
{
struct controlset *s;
struct sessionsaver_data *ssd;
"SSH", 's', I(PROT_SSH),
NULL);
}
-
- s = ctrl_getset(b, "Session", "savedsessions",
- "Load, save or delete a stored session");
- ctrl_columns(s, 2, 75, 25);
- ssd->sesslist = sesslist;
- ssd->editbox = ctrl_editbox(s, "Saved Sessions", 'e', 100,
- HELPCTX(session_saved),
- sessionsaver_handler, P(ssd), P(NULL));
- ssd->editbox->generic.column = 0;
- /* Reset columns so that the buttons are alongside the list, rather
- * than alongside that edit box. */
- ctrl_columns(s, 1, 100);
- ctrl_columns(s, 2, 75, 25);
- ssd->listbox = ctrl_listbox(s, NULL, NO_SHORTCUT,
- HELPCTX(session_saved),
- sessionsaver_handler, P(ssd));
- ssd->listbox->generic.column = 0;
- ssd->listbox->listbox.height = 7;
- ssd->loadbutton = ctrl_pushbutton(s, "Load", 'l',
- HELPCTX(session_saved),
- sessionsaver_handler, P(ssd));
- ssd->loadbutton->generic.column = 1;
- ssd->savebutton = ctrl_pushbutton(s, "Save", 'v',
- HELPCTX(session_saved),
- sessionsaver_handler, P(ssd));
- ssd->savebutton->generic.column = 1;
- ssd->delbutton = ctrl_pushbutton(s, "Delete", 'd',
- HELPCTX(session_saved),
- sessionsaver_handler, P(ssd));
- ssd->delbutton->generic.column = 1;
- ctrl_columns(s, 1, 100);
}
+ /*
+ * The Load/Save panel is available even in mid-session.
+ */
+ s = ctrl_getset(b, "Session", "savedsessions",
+ "Load, save or delete a stored session");
+ ctrl_columns(s, 2, 75, 25);
+ ssd->sesslist = sesslist;
+ ssd->editbox = ctrl_editbox(s, "Saved Sessions", 'e', 100,
+ HELPCTX(session_saved),
+ sessionsaver_handler, P(ssd), P(NULL));
+ ssd->editbox->generic.column = 0;
+ /* Reset columns so that the buttons are alongside the list, rather
+ * than alongside that edit box. */
+ ctrl_columns(s, 1, 100);
+ ctrl_columns(s, 2, 75, 25);
+ ssd->listbox = ctrl_listbox(s, NULL, NO_SHORTCUT,
+ HELPCTX(session_saved),
+ sessionsaver_handler, P(ssd));
+ ssd->listbox->generic.column = 0;
+ ssd->listbox->listbox.height = 7;
+ ssd->loadbutton = ctrl_pushbutton(s, "Load", 'l',
+ HELPCTX(session_saved),
+ sessionsaver_handler, P(ssd));
+ ssd->loadbutton->generic.column = 1;
+ ssd->savebutton = ctrl_pushbutton(s, "Save", 'v',
+ HELPCTX(session_saved),
+ sessionsaver_handler, P(ssd));
+ ssd->savebutton->generic.column = 1;
+ ssd->delbutton = ctrl_pushbutton(s, "Delete", 'd',
+ HELPCTX(session_saved),
+ sessionsaver_handler, P(ssd));
+ ssd->delbutton->generic.column = 1;
+ ctrl_columns(s, 1, 100);
+
s = ctrl_getset(b, "Session", "otheropts", NULL);
c = ctrl_radiobuttons(s, "Close window on exit:", 'w', 4,
HELPCTX(session_coe),
"Always overwrite it", I(LGXF_OVR),
"Always append to the end of it", I(LGXF_APN),
"Ask the user every time", I(LGXF_ASK), NULL);
+ ctrl_checkbox(s, "Flush log file frequently", 'u',
+ HELPCTX(logging_flush),
+ dlg_stdcheckbox_handler, I(offsetof(Config,logflush)));
+
+ if ((midsession && protocol == PROT_SSH) ||
+ (!midsession && backends[3].name != NULL)) {
+ s = ctrl_getset(b, "Session/Logging", "ssh",
+ "Options specific to SSH packet logging");
+ ctrl_checkbox(s, "Omit known password fields", 'k',
+ HELPCTX(logging_ssh_omit_password),
+ dlg_stdcheckbox_handler, I(offsetof(Config,logomitpass)));
+ ctrl_checkbox(s, "Omit session data", 'd',
+ HELPCTX(logging_ssh_omit_data),
+ dlg_stdcheckbox_handler, I(offsetof(Config,logomitdata)));
+ }
/*
* The Terminal panel.
ctrl_checkbox(s, "Disable remote-controlled character set configuration",
'r', HELPCTX(features_charset), dlg_stdcheckbox_handler,
I(offsetof(Config,no_remote_charset)));
+ ctrl_checkbox(s, "Disable Arabic text shaping",
+ 'l', HELPCTX(features_arabicshaping), dlg_stdcheckbox_handler,
+ I(offsetof(Config, arabicshaping)));
+ ctrl_checkbox(s, "Disable bidirectional text display",
+ 'd', HELPCTX(features_bidi), dlg_stdcheckbox_handler,
+ I(offsetof(Config, bidi)));
/*
* The Window panel.
s = ctrl_getset(b, "Window/Colours", "general",
"General options for colour usage");
+ ctrl_checkbox(s, "Allow terminal to specify ANSI colours", 'i',
+ HELPCTX(colours_ansi),
+ dlg_stdcheckbox_handler, I(offsetof(Config,ansi_colour)));
+ ctrl_checkbox(s, "Allow terminal to use xterm 256-colour mode", '2',
+ HELPCTX(colours_xterm256), dlg_stdcheckbox_handler,
+ I(offsetof(Config,xterm_256_colour)));
ctrl_checkbox(s, "Bolded text is a different colour", 'b',
HELPCTX(colours_bold),
dlg_stdcheckbox_handler, I(offsetof(Config,bold_colour)));
HELPCTX(connection_username),
dlg_stdeditbox_handler, I(offsetof(Config,username)),
I(sizeof(((Config *)0)->username)));
+
+ ctrl_text(s, "Environment variables:", HELPCTX(telnet_environ));
+ ctrl_columns(s, 2, 80, 20);
+ ed = (struct environ_data *)
+ ctrl_alloc(b, sizeof(struct environ_data));
+ ed->varbox = ctrl_editbox(s, "Variable", 'v', 60,
+ HELPCTX(telnet_environ),
+ environ_handler, P(ed), P(NULL));
+ ed->varbox->generic.column = 0;
+ ed->valbox = ctrl_editbox(s, "Value", 'l', 60,
+ HELPCTX(telnet_environ),
+ environ_handler, P(ed), P(NULL));
+ ed->valbox->generic.column = 0;
+ ed->addbutton = ctrl_pushbutton(s, "Add", 'd',
+ HELPCTX(telnet_environ),
+ environ_handler, P(ed));
+ ed->addbutton->generic.column = 1;
+ ed->rembutton = ctrl_pushbutton(s, "Remove", 'r',
+ HELPCTX(telnet_environ),
+ environ_handler, P(ed));
+ ed->rembutton->generic.column = 1;
+ ctrl_columns(s, 1, 100);
+ ed->listbox = ctrl_listbox(s, NULL, NO_SHORTCUT,
+ HELPCTX(telnet_environ),
+ environ_handler, P(ed));
+ ed->listbox->listbox.height = 3;
+ ed->listbox->listbox.ncols = 2;
+ ed->listbox->listbox.percentages = snewn(2, int);
+ ed->listbox->listbox.percentages[0] = 30;
+ ed->listbox->listbox.percentages[1] = 70;
}
s = ctrl_getset(b, "Connection", "keepalive",
'n', HELPCTX(connection_nodelay),
dlg_stdcheckbox_handler,
I(offsetof(Config,tcp_nodelay)));
+ ctrl_checkbox(s, "Enable TCP keepalives (SO_KEEPALIVE option)",
+ 'p', HELPCTX(connection_tcpkeepalive),
+ dlg_stdcheckbox_handler,
+ I(offsetof(Config,tcp_keepalives)));
}
}
ctrl_settitle(b, "Connection/Telnet",
"Options controlling Telnet connections");
- if (!midsession) {
- s = ctrl_getset(b, "Connection/Telnet", "data",
- "Data to send to the server");
- ctrl_text(s, "Environment variables:", HELPCTX(telnet_environ));
- ctrl_columns(s, 2, 80, 20);
- ed = (struct environ_data *)
- ctrl_alloc(b, sizeof(struct environ_data));
- ed->varbox = ctrl_editbox(s, "Variable", 'v', 60,
- HELPCTX(telnet_environ),
- environ_handler, P(ed), P(NULL));
- ed->varbox->generic.column = 0;
- ed->valbox = ctrl_editbox(s, "Value", 'l', 60,
- HELPCTX(telnet_environ),
- environ_handler, P(ed), P(NULL));
- ed->valbox->generic.column = 0;
- ed->addbutton = ctrl_pushbutton(s, "Add", 'd',
- HELPCTX(telnet_environ),
- environ_handler, P(ed));
- ed->addbutton->generic.column = 1;
- ed->rembutton = ctrl_pushbutton(s, "Remove", 'r',
- HELPCTX(telnet_environ),
- environ_handler, P(ed));
- ed->rembutton->generic.column = 1;
- ctrl_columns(s, 1, 100);
- ed->listbox = ctrl_listbox(s, NULL, NO_SHORTCUT,
- HELPCTX(telnet_environ),
- environ_handler, P(ed));
- ed->listbox->listbox.height = 3;
- ed->listbox->listbox.ncols = 2;
- ed->listbox->listbox.percentages = snewn(2, int);
- ed->listbox->listbox.percentages[0] = 30;
- ed->listbox->listbox.percentages[1] = 70;
- }
-
s = ctrl_getset(b, "Connection/Telnet", "protocol",
"Telnet protocol adjustments");
I(offsetof(Config, passive_telnet)),
"Passive", I(1), "Active", I(0), NULL);
}
- ctrl_checkbox(s, "Keyboard sends telnet Backspace and Interrupt", 'k',
+ ctrl_checkbox(s, "Keyboard sends Telnet special commands", 'k',
HELPCTX(telnet_specialkeys),
dlg_stdcheckbox_handler,
I(offsetof(Config,telnet_keyboard)));
- ctrl_checkbox(s, "Return key sends telnet New Line instead of ^M",
- NO_SHORTCUT, HELPCTX(telnet_newline),
+ ctrl_checkbox(s, "Return key sends Telnet New Line instead of ^M",
+ 'm', HELPCTX(telnet_newline),
dlg_stdcheckbox_handler,
I(offsetof(Config,telnet_newline)));
}
}
/*
- * All the SSH stuff is omitted in PuTTYtel.
+ * All the SSH stuff is omitted in PuTTYtel, or in a reconfig
+ * when we're not doing SSH.
*/
- if (!midsession && backends[3].name != NULL) {
+ if (backends[3].name != NULL && (!midsession || protocol == PROT_SSH)) {
/*
* The Connection/SSH panel.
ctrl_settitle(b, "Connection/SSH",
"Options controlling SSH connections");
- s = ctrl_getset(b, "Connection/SSH", "data",
- "Data to send to the server");
- ctrl_editbox(s, "Remote command:", 'r', 100,
- HELPCTX(ssh_command),
- dlg_stdeditbox_handler, I(offsetof(Config,remote_cmd)),
- I(sizeof(((Config *)0)->remote_cmd)));
-
- s = ctrl_getset(b, "Connection/SSH", "protocol", "Protocol options");
- ctrl_checkbox(s, "Don't allocate a pseudo-terminal", 'p',
- HELPCTX(ssh_nopty),
- dlg_stdcheckbox_handler,
- I(offsetof(Config,nopty)));
- ctrl_checkbox(s, "Enable compression", 'e',
- HELPCTX(ssh_compress),
- dlg_stdcheckbox_handler,
- I(offsetof(Config,compression)));
- ctrl_radiobuttons(s, "Preferred SSH protocol version:", NO_SHORTCUT, 4,
- HELPCTX(ssh_protocol),
- dlg_stdradiobutton_handler,
- I(offsetof(Config, sshprot)),
- "1 only", 'l', I(0),
- "1", '1', I(1),
- "2", '2', I(2),
- "2 only", 'n', I(3), NULL);
-
- s = ctrl_getset(b, "Connection/SSH", "encryption", "Encryption options");
- c = ctrl_draglist(s, "Encryption cipher selection policy:", 's',
+ if (midsession) {
+ s = ctrl_getset(b, "Connection/SSH", "disclaimer", NULL);
+ ctrl_text(s, "Nothing on this panel may be reconfigured in mid-"
+ "session; it is only here so that sub-panels of it can "
+ "exist without looking strange.", HELPCTX(no_help));
+ }
+
+ if (!midsession) {
+
+ s = ctrl_getset(b, "Connection/SSH", "data",
+ "Data to send to the server");
+ ctrl_editbox(s, "Remote command:", 'r', 100,
+ HELPCTX(ssh_command),
+ dlg_stdeditbox_handler, I(offsetof(Config,remote_cmd)),
+ I(sizeof(((Config *)0)->remote_cmd)));
+
+ s = ctrl_getset(b, "Connection/SSH", "protocol", "Protocol options");
+ ctrl_checkbox(s, "Don't allocate a pseudo-terminal", 'p',
+ HELPCTX(ssh_nopty),
+ dlg_stdcheckbox_handler,
+ I(offsetof(Config,nopty)));
+ ctrl_checkbox(s, "Don't start a shell or command at all", 'n',
+ HELPCTX(ssh_noshell),
+ dlg_stdcheckbox_handler,
+ I(offsetof(Config,ssh_no_shell)));
+ ctrl_checkbox(s, "Enable compression", 'e',
+ HELPCTX(ssh_compress),
+ dlg_stdcheckbox_handler,
+ I(offsetof(Config,compression)));
+ ctrl_radiobuttons(s, "Preferred SSH protocol version:", NO_SHORTCUT, 4,
+ HELPCTX(ssh_protocol),
+ dlg_stdradiobutton_handler,
+ I(offsetof(Config, sshprot)),
+ "1 only", 'l', I(0),
+ "1", '1', I(1),
+ "2", '2', I(2),
+ "2 only", 'y', I(3), NULL);
+
+ s = ctrl_getset(b, "Connection/SSH", "encryption", "Encryption options");
+ c = ctrl_draglist(s, "Encryption cipher selection policy:", 's',
+ HELPCTX(ssh_ciphers),
+ cipherlist_handler, P(NULL));
+ c->listbox.height = 6;
+
+ ctrl_checkbox(s, "Enable legacy use of single-DES in SSH 2", 'i',
HELPCTX(ssh_ciphers),
- cipherlist_handler, P(NULL));
- c->listbox.height = 6;
-
- ctrl_checkbox(s, "Enable legacy use of single-DES in SSH 2", 'i',
- HELPCTX(ssh_ciphers),
- dlg_stdcheckbox_handler,
- I(offsetof(Config,ssh2_des_cbc)));
+ dlg_stdcheckbox_handler,
+ I(offsetof(Config,ssh2_des_cbc)));
+ }
/*
- * The Connection/SSH/Auth panel.
+ * The Connection/SSH/Kex panel. (Owing to repeat key
+ * exchange, this is all meaningful in mid-session _if_
+ * we're using SSH2 or haven't decided yet.)
*/
- ctrl_settitle(b, "Connection/SSH/Auth",
- "Options controlling SSH authentication");
+ if (protcfginfo != 1) {
+ ctrl_settitle(b, "Connection/SSH/Kex",
+ "Options controlling SSH key exchange");
+
+ s = ctrl_getset(b, "Connection/SSH/Kex", "main",
+ "Key exchange algorithm options");
+ c = ctrl_draglist(s, "Algorithm selection policy", 's',
+ HELPCTX(ssh_kexlist),
+ kexlist_handler, P(NULL));
+ c->listbox.height = 5;
+
+ s = ctrl_getset(b, "Connection/SSH/Kex", "repeat",
+ "Options controlling key re-exchange");
+
+ ctrl_editbox(s, "Max minutes before rekey (0 for no limit)", 't', 20,
+ HELPCTX(ssh_kex_repeat),
+ dlg_stdeditbox_handler,
+ I(offsetof(Config,ssh_rekey_time)),
+ I(-1));
+ ctrl_editbox(s, "Max data before rekey (0 for no limit)", 'x', 20,
+ HELPCTX(ssh_kex_repeat),
+ dlg_stdeditbox_handler,
+ I(offsetof(Config,ssh_rekey_data)),
+ I(16));
+ ctrl_text(s, "(Use 1M for 1 megabyte, 1G for 1 gigabyte etc)",
+ HELPCTX(ssh_kex_repeat));
+ }
- s = ctrl_getset(b, "Connection/SSH/Auth", "methods",
- "Authentication methods");
- ctrl_checkbox(s, "Attempt TIS or CryptoCard auth (SSH1)", 'm',
- HELPCTX(ssh_auth_tis),
- dlg_stdcheckbox_handler,
- I(offsetof(Config,try_tis_auth)));
- ctrl_checkbox(s, "Attempt \"keyboard-interactive\" auth (SSH2)",
- 'i', HELPCTX(ssh_auth_ki),
- dlg_stdcheckbox_handler,
- I(offsetof(Config,try_ki_auth)));
-
- s = ctrl_getset(b, "Connection/SSH/Auth", "params",
- "Authentication parameters");
- ctrl_checkbox(s, "Allow agent forwarding", 'f',
- HELPCTX(ssh_auth_agentfwd),
- dlg_stdcheckbox_handler, I(offsetof(Config,agentfwd)));
- ctrl_checkbox(s, "Allow attempted changes of username in SSH2", 'u',
- HELPCTX(ssh_auth_changeuser),
- dlg_stdcheckbox_handler,
- I(offsetof(Config,change_username)));
- ctrl_filesel(s, "Private key file for authentication:", 'k',
- FILTER_KEY_FILES, FALSE, "Select private key file",
- HELPCTX(ssh_auth_privkey),
- dlg_stdfilesel_handler, I(offsetof(Config, keyfile)));
+ if (!midsession) {
+
+ /*
+ * The Connection/SSH/Auth panel.
+ */
+ ctrl_settitle(b, "Connection/SSH/Auth",
+ "Options controlling SSH authentication");
+
+ s = ctrl_getset(b, "Connection/SSH/Auth", "methods",
+ "Authentication methods");
+ ctrl_checkbox(s, "Attempt TIS or CryptoCard auth (SSH1)", 'm',
+ HELPCTX(ssh_auth_tis),
+ dlg_stdcheckbox_handler,
+ I(offsetof(Config,try_tis_auth)));
+ ctrl_checkbox(s, "Attempt \"keyboard-interactive\" auth (SSH2)",
+ 'i', HELPCTX(ssh_auth_ki),
+ dlg_stdcheckbox_handler,
+ I(offsetof(Config,try_ki_auth)));
+
+ s = ctrl_getset(b, "Connection/SSH/Auth", "params",
+ "Authentication parameters");
+ ctrl_checkbox(s, "Allow agent forwarding", 'f',
+ HELPCTX(ssh_auth_agentfwd),
+ dlg_stdcheckbox_handler, I(offsetof(Config,agentfwd)));
+ ctrl_checkbox(s, "Allow attempted changes of username in SSH2", 'u',
+ HELPCTX(ssh_auth_changeuser),
+ dlg_stdcheckbox_handler,
+ I(offsetof(Config,change_username)));
+ ctrl_filesel(s, "Private key file for authentication:", 'k',
+ FILTER_KEY_FILES, FALSE, "Select private key file",
+ HELPCTX(ssh_auth_privkey),
+ dlg_stdfilesel_handler, I(offsetof(Config, keyfile)));
+ }
/*
- * The Connection/SSH/Tunnels panel.
+ * The Connection/SSH/Tunnels panel. Some of this _is_
+ * still available in mid-session.
*/
ctrl_settitle(b, "Connection/SSH/Tunnels",
"Options controlling SSH tunnelling");
- s = ctrl_getset(b, "Connection/SSH/Tunnels", "x11", "X11 forwarding");
- ctrl_checkbox(s, "Enable X11 forwarding", 'e',
- HELPCTX(ssh_tunnels_x11),
- dlg_stdcheckbox_handler,I(offsetof(Config,x11_forward)));
- ctrl_editbox(s, "X display location", 'x', 50,
- HELPCTX(ssh_tunnels_x11),
- dlg_stdeditbox_handler, I(offsetof(Config,x11_display)),
- I(sizeof(((Config *)0)->x11_display)));
- ctrl_radiobuttons(s, "Remote X11 authentication protocol", 'u', 2,
- HELPCTX(ssh_tunnels_x11auth),
- dlg_stdradiobutton_handler,
- I(offsetof(Config, x11_auth)),
- "MIT-Magic-Cookie-1", I(X11_MIT),
- "XDM-Authorization-1", I(X11_XDM), NULL);
+ if (!midsession) {
+ s = ctrl_getset(b, "Connection/SSH/Tunnels", "x11", "X11 forwarding");
+ ctrl_checkbox(s, "Enable X11 forwarding", 'e',
+ HELPCTX(ssh_tunnels_x11),
+ dlg_stdcheckbox_handler,I(offsetof(Config,x11_forward)));
+ ctrl_editbox(s, "X display location", 'x', 50,
+ HELPCTX(ssh_tunnels_x11),
+ dlg_stdeditbox_handler, I(offsetof(Config,x11_display)),
+ I(sizeof(((Config *)0)->x11_display)));
+ ctrl_radiobuttons(s, "Remote X11 authentication protocol", 'u', 2,
+ HELPCTX(ssh_tunnels_x11auth),
+ dlg_stdradiobutton_handler,
+ I(offsetof(Config, x11_auth)),
+ "MIT-Magic-Cookie-1", I(X11_MIT),
+ "XDM-Authorization-1", I(X11_XDM), NULL);
+ }
s = ctrl_getset(b, "Connection/SSH/Tunnels", "portfwd",
"Port forwarding");
ctrl_tabdelay(s, pfd->addbutton);
ctrl_columns(s, 1, 100);
- /*
- * The Connection/SSH/Bugs panel.
- */
- ctrl_settitle(b, "Connection/SSH/Bugs",
- "Workarounds for SSH server bugs");
-
- s = ctrl_getset(b, "Connection/SSH/Bugs", "main",
- "Detection of known bugs in SSH servers");
- ctrl_droplist(s, "Chokes on SSH1 ignore messages", 'i', 20,
- HELPCTX(ssh_bugs_ignore1),
- sshbug_handler, I(offsetof(Config,sshbug_ignore1)));
- ctrl_droplist(s, "Refuses all SSH1 password camouflage", 's', 20,
- HELPCTX(ssh_bugs_plainpw1),
- sshbug_handler, I(offsetof(Config,sshbug_plainpw1)));
- ctrl_droplist(s, "Chokes on SSH1 RSA authentication", 'r', 20,
- HELPCTX(ssh_bugs_rsa1),
- sshbug_handler, I(offsetof(Config,sshbug_rsa1)));
- ctrl_droplist(s, "Miscomputes SSH2 HMAC keys", 'm', 20,
- HELPCTX(ssh_bugs_hmac2),
- sshbug_handler, I(offsetof(Config,sshbug_hmac2)));
- ctrl_droplist(s, "Miscomputes SSH2 encryption keys", 'e', 20,
- HELPCTX(ssh_bugs_derivekey2),
- sshbug_handler, I(offsetof(Config,sshbug_derivekey2)));
- ctrl_droplist(s, "Requires padding on SSH2 RSA signatures", 'p', 20,
- HELPCTX(ssh_bugs_rsapad2),
- sshbug_handler, I(offsetof(Config,sshbug_rsapad2)));
- ctrl_droplist(s, "Chokes on Diffie-Hellman group exchange", 'd', 20,
- HELPCTX(ssh_bugs_dhgex2),
- sshbug_handler, I(offsetof(Config,sshbug_dhgex2)));
- ctrl_droplist(s, "Misuses the session ID in PK auth", 'n', 20,
- HELPCTX(ssh_bugs_pksessid2),
- sshbug_handler, I(offsetof(Config,sshbug_pksessid2)));
+ if (!midsession) {
+ /*
+ * The Connection/SSH/Bugs panel.
+ */
+ ctrl_settitle(b, "Connection/SSH/Bugs",
+ "Workarounds for SSH server bugs");
+
+ s = ctrl_getset(b, "Connection/SSH/Bugs", "main",
+ "Detection of known bugs in SSH servers");
+ ctrl_droplist(s, "Chokes on SSH1 ignore messages", 'i', 20,
+ HELPCTX(ssh_bugs_ignore1),
+ sshbug_handler, I(offsetof(Config,sshbug_ignore1)));
+ ctrl_droplist(s, "Refuses all SSH1 password camouflage", 's', 20,
+ HELPCTX(ssh_bugs_plainpw1),
+ sshbug_handler, I(offsetof(Config,sshbug_plainpw1)));
+ ctrl_droplist(s, "Chokes on SSH1 RSA authentication", 'r', 20,
+ HELPCTX(ssh_bugs_rsa1),
+ sshbug_handler, I(offsetof(Config,sshbug_rsa1)));
+ ctrl_droplist(s, "Miscomputes SSH2 HMAC keys", 'm', 20,
+ HELPCTX(ssh_bugs_hmac2),
+ sshbug_handler, I(offsetof(Config,sshbug_hmac2)));
+ ctrl_droplist(s, "Miscomputes SSH2 encryption keys", 'e', 20,
+ HELPCTX(ssh_bugs_derivekey2),
+ sshbug_handler, I(offsetof(Config,sshbug_derivekey2)));
+ ctrl_droplist(s, "Requires padding on SSH2 RSA signatures", 'p', 20,
+ HELPCTX(ssh_bugs_rsapad2),
+ sshbug_handler, I(offsetof(Config,sshbug_rsapad2)));
+ ctrl_droplist(s, "Misuses the session ID in PK auth", 'n', 20,
+ HELPCTX(ssh_bugs_pksessid2),
+ sshbug_handler, I(offsetof(Config,sshbug_pksessid2)));
+ }
}
}
projects / u / mdw / putty / blobdiff