{ "3DES", CIPHER_3DES },
{ "Blowfish", CIPHER_BLOWFISH },
{ "DES", CIPHER_DES },
- { "AES (SSH 2 only)", CIPHER_AES },
+ { "AES (SSH-2 only)", CIPHER_AES },
{ "-- warn below here --", CIPHER_WARN }
};
/* If at this point we have a valid session, go! */
if (*cfg2.host) {
*cfg = cfg2; /* structure copy */
- cfg->remote_cmd_ptr = cfg->remote_cmd; /* nasty */
+ cfg->remote_cmd_ptr = NULL;
dlg_end(dlg, 1);
} else
dlg_beep(dlg);
struct portfwd_data {
union control *addbutton, *rembutton, *listbox;
union control *sourcebox, *destbox, *direction;
+#ifndef NO_IPV6
+ union control *addressfamily;
+#endif
};
static void portfwd_handler(union control *ctrl, void *dlg,
* Default is Local.
*/
dlg_radiobutton_set(ctrl, dlg, 0);
+#ifndef NO_IPV6
+ } else if (ctrl == pfd->addressfamily) {
+ dlg_radiobutton_set(ctrl, dlg, 0);
+#endif
}
} else if (event == EVENT_ACTION) {
if (ctrl == pfd->addbutton) {
char str[sizeof(cfg->portfwd)];
char *p;
- int whichbutton = dlg_radiobutton_get(pfd->direction, dlg);
+ int i, type;
+ int whichbutton;
+
+ i = 0;
+#ifndef NO_IPV6
+ whichbutton = dlg_radiobutton_get(pfd->addressfamily, dlg);
+ if (whichbutton == 1)
+ str[i++] = '4';
+ else if (whichbutton == 2)
+ str[i++] = '6';
+#endif
+
+ whichbutton = dlg_radiobutton_get(pfd->direction, dlg);
if (whichbutton == 0)
- str[0] = 'L';
+ type = 'L';
else if (whichbutton == 1)
- str[0] = 'R';
+ type = 'R';
else
- str[0] = 'D';
- dlg_editbox_get(pfd->sourcebox, dlg, str+1, sizeof(str) - 2);
- if (!str[1]) {
+ type = 'D';
+ str[i++] = type;
+
+ dlg_editbox_get(pfd->sourcebox, dlg, str+i, sizeof(str) - i);
+ if (!str[i]) {
dlg_error_msg(dlg, "You need to specify a source port number");
return;
}
p = str + strlen(str);
- if (str[0] != 'D') {
+ if (type != 'D') {
*p++ = '\t';
dlg_editbox_get(pfd->destbox, dlg, p,
- sizeof(str)-1 - (p - str));
+ sizeof(str) - (p - str));
if (!*p || !strchr(p, ':')) {
dlg_error_msg(dlg,
"You need to specify a destination address\n"
p++;
p++;
}
- if ((p - cfg->portfwd) + strlen(str) + 2 <
+ if ((p - cfg->portfwd) + strlen(str) + 2 <=
sizeof(cfg->portfwd)) {
strcpy(p, str);
p[strlen(str) + 1] = '\0';
* The Load/Save panel is available even in mid-session.
*/
s = ctrl_getset(b, "Session", "savedsessions",
+ midsession ? "Save the current session settings" :
"Load, save or delete a stored session");
ctrl_columns(s, 2, 75, 25);
ssd->sesslist = sesslist;
if (protocol >= 0) {
ctrl_settitle(b, "Connection", "Options controlling the connection");
+ s = ctrl_getset(b, "Connection", "keepalive",
+ "Sending of null packets to keep session active");
+ ctrl_editbox(s, "Seconds between keepalives (0 to turn off)", 'k', 20,
+ HELPCTX(connection_keepalive),
+ dlg_stdeditbox_handler, I(offsetof(Config,ping_interval)),
+ I(-1));
+
if (!midsession) {
- s = ctrl_getset(b, "Connection", "data",
- "Data to send to the server");
+ s = ctrl_getset(b, "Connection", "tcp",
+ "Low-level TCP connection options");
+ ctrl_checkbox(s, "Disable Nagle's algorithm (TCP_NODELAY option)",
+ 'n', HELPCTX(connection_nodelay),
+ dlg_stdcheckbox_handler,
+ I(offsetof(Config,tcp_nodelay)));
+ ctrl_checkbox(s, "Enable TCP keepalives (SO_KEEPALIVE option)",
+ 'p', HELPCTX(connection_tcpkeepalive),
+ dlg_stdcheckbox_handler,
+ I(offsetof(Config,tcp_keepalives)));
+#ifndef NO_IPV6
+ s = ctrl_getset(b, "Connection", "ipversion",
+ "Internet protocol version");
+ ctrl_radiobuttons(s, NULL, NO_SHORTCUT, 3,
+ HELPCTX(connection_ipversion),
+ dlg_stdradiobutton_handler,
+ I(offsetof(Config, addressfamily)),
+ "Auto", NO_SHORTCUT, I(ADDRTYPE_UNSPEC),
+ "IPv4", NO_SHORTCUT, I(ADDRTYPE_IPV4),
+ "IPv6", NO_SHORTCUT, I(ADDRTYPE_IPV6),
+ NULL);
+#endif
+ }
+
+ /*
+ * A sub-panel Connection/Data, containing options that
+ * decide on data to send to the server.
+ */
+ if (!midsession) {
+ ctrl_settitle(b, "Connection/Data", "Data to send to the server");
+
+ s = ctrl_getset(b, "Connection/Data", "login",
+ "Login details");
+ ctrl_editbox(s, "Auto-login username", 'u', 50,
+ HELPCTX(connection_username),
+ dlg_stdeditbox_handler, I(offsetof(Config,username)),
+ I(sizeof(((Config *)0)->username)));
+
+ s = ctrl_getset(b, "Connection/Data", "term",
+ "Terminal details");
ctrl_editbox(s, "Terminal-type string", 't', 50,
HELPCTX(connection_termtype),
dlg_stdeditbox_handler, I(offsetof(Config,termtype)),
HELPCTX(connection_termspeed),
dlg_stdeditbox_handler, I(offsetof(Config,termspeed)),
I(sizeof(((Config *)0)->termspeed)));
- ctrl_editbox(s, "Auto-login username", 'u', 50,
- HELPCTX(connection_username),
- dlg_stdeditbox_handler, I(offsetof(Config,username)),
- I(sizeof(((Config *)0)->username)));
- ctrl_text(s, "Environment variables:", HELPCTX(telnet_environ));
+ s = ctrl_getset(b, "Connection/Data", "env",
+ "Environment variables");
ctrl_columns(s, 2, 80, 20);
ed = (struct environ_data *)
ctrl_alloc(b, sizeof(struct environ_data));
ed->listbox->listbox.percentages[1] = 70;
}
- s = ctrl_getset(b, "Connection", "keepalive",
- "Sending of null packets to keep session active");
- ctrl_editbox(s, "Seconds between keepalives (0 to turn off)", 'k', 20,
- HELPCTX(connection_keepalive),
- dlg_stdeditbox_handler, I(offsetof(Config,ping_interval)),
- I(-1));
-
- if (!midsession) {
- s = ctrl_getset(b, "Connection", "tcp",
- "Low-level TCP connection options");
- ctrl_checkbox(s, "Disable Nagle's algorithm (TCP_NODELAY option)",
- 'n', HELPCTX(connection_nodelay),
- dlg_stdcheckbox_handler,
- I(offsetof(Config,tcp_nodelay)));
- ctrl_checkbox(s, "Enable TCP keepalives (SO_KEEPALIVE option)",
- 'p', HELPCTX(connection_tcpkeepalive),
- dlg_stdcheckbox_handler,
- I(offsetof(Config,tcp_keepalives)));
- }
-
}
if (!midsession) {
ctrl_settitle(b, "Connection/SSH",
"Options controlling SSH connections");
- if (midsession) {
+ if (midsession && protcfginfo == 1) {
s = ctrl_getset(b, "Connection/SSH", "disclaimer", NULL);
ctrl_text(s, "Nothing on this panel may be reconfigured in mid-"
"session; it is only here so that sub-panels of it can "
HELPCTX(ssh_noshell),
dlg_stdcheckbox_handler,
I(offsetof(Config,ssh_no_shell)));
+ }
+
+ if (!midsession || protcfginfo != 1) {
+ s = ctrl_getset(b, "Connection/SSH", "protocol", "Protocol options");
+
ctrl_checkbox(s, "Enable compression", 'e',
HELPCTX(ssh_compress),
dlg_stdcheckbox_handler,
I(offsetof(Config,compression)));
+ }
+
+ if (!midsession) {
+ s = ctrl_getset(b, "Connection/SSH", "protocol", "Protocol options");
+
ctrl_radiobuttons(s, "Preferred SSH protocol version:", NO_SHORTCUT, 4,
HELPCTX(ssh_protocol),
dlg_stdradiobutton_handler,
"1", '1', I(1),
"2", '2', I(2),
"2 only", 'y', I(3), NULL);
+ }
+ if (!midsession || protcfginfo != 1) {
s = ctrl_getset(b, "Connection/SSH", "encryption", "Encryption options");
c = ctrl_draglist(s, "Encryption cipher selection policy:", 's',
HELPCTX(ssh_ciphers),
cipherlist_handler, P(NULL));
c->listbox.height = 6;
- ctrl_checkbox(s, "Enable legacy use of single-DES in SSH 2", 'i',
+ ctrl_checkbox(s, "Enable legacy use of single-DES in SSH-2", 'i',
HELPCTX(ssh_ciphers),
dlg_stdcheckbox_handler,
I(offsetof(Config,ssh2_des_cbc)));
/*
* The Connection/SSH/Kex panel. (Owing to repeat key
* exchange, this is all meaningful in mid-session _if_
- * we're using SSH2 or haven't decided yet.)
+ * we're using SSH-2 or haven't decided yet.)
*/
if (protcfginfo != 1) {
ctrl_settitle(b, "Connection/SSH/Kex",
s = ctrl_getset(b, "Connection/SSH/Kex", "main",
"Key exchange algorithm options");
- c = ctrl_draglist(s, "Algorithm selection policy", 's',
+ c = ctrl_draglist(s, "Algorithm selection policy:", 's',
HELPCTX(ssh_kexlist),
kexlist_handler, P(NULL));
c->listbox.height = 5;
s = ctrl_getset(b, "Connection/SSH/Auth", "methods",
"Authentication methods");
- ctrl_checkbox(s, "Attempt TIS or CryptoCard auth (SSH1)", 'm',
+ ctrl_checkbox(s, "Attempt TIS or CryptoCard auth (SSH-1)", 'm',
HELPCTX(ssh_auth_tis),
dlg_stdcheckbox_handler,
I(offsetof(Config,try_tis_auth)));
- ctrl_checkbox(s, "Attempt \"keyboard-interactive\" auth (SSH2)",
+ ctrl_checkbox(s, "Attempt \"keyboard-interactive\" auth (SSH-2)",
'i', HELPCTX(ssh_auth_ki),
dlg_stdcheckbox_handler,
I(offsetof(Config,try_ki_auth)));
ctrl_checkbox(s, "Allow agent forwarding", 'f',
HELPCTX(ssh_auth_agentfwd),
dlg_stdcheckbox_handler, I(offsetof(Config,agentfwd)));
- ctrl_checkbox(s, "Allow attempted changes of username in SSH2", 'u',
+ ctrl_checkbox(s, "Allow attempted changes of username in SSH-2", 'u',
HELPCTX(ssh_auth_changeuser),
dlg_stdcheckbox_handler,
I(offsetof(Config,change_username)));
dlg_stdfilesel_handler, I(offsetof(Config, keyfile)));
}
- /*
- * The Connection/SSH/Tunnels panel. Some of this _is_
- * still available in mid-session.
- */
- ctrl_settitle(b, "Connection/SSH/Tunnels",
- "Options controlling SSH tunnelling");
-
if (!midsession) {
- s = ctrl_getset(b, "Connection/SSH/Tunnels", "x11", "X11 forwarding");
+ /*
+ * The Connection/SSH/X11 panel.
+ */
+ ctrl_settitle(b, "Connection/SSH/X11",
+ "Options controlling SSH X11 forwarding");
+
+ s = ctrl_getset(b, "Connection/SSH/X11", "x11", "X11 forwarding");
ctrl_checkbox(s, "Enable X11 forwarding", 'e',
HELPCTX(ssh_tunnels_x11),
dlg_stdcheckbox_handler,I(offsetof(Config,x11_forward)));
"XDM-Authorization-1", I(X11_XDM), NULL);
}
+ /*
+ * The Tunnels panel _is_ still available in mid-session.
+ */
+ ctrl_settitle(b, "Connection/SSH/Tunnels",
+ "Options controlling SSH port forwarding");
+
s = ctrl_getset(b, "Connection/SSH/Tunnels", "portfwd",
"Port forwarding");
ctrl_checkbox(s, "Local ports accept connections from other hosts",'t',
HELPCTX(ssh_tunnels_portfwd_localhost),
dlg_stdcheckbox_handler,
I(offsetof(Config,lport_acceptall)));
- ctrl_checkbox(s, "Remote ports do the same (SSH v2 only)", 'p',
+ ctrl_checkbox(s, "Remote ports do the same (SSH-2 only)", 'p',
HELPCTX(ssh_tunnels_portfwd_localhost),
dlg_stdcheckbox_handler,
I(offsetof(Config,rport_acceptall)));
"Remote", 'm', P(NULL),
"Dynamic", 'y', P(NULL),
NULL);
+#ifndef NO_IPV6
+ pfd->addressfamily =
+ ctrl_radiobuttons(s, NULL, NO_SHORTCUT, 3,
+ HELPCTX(ssh_tunnels_portfwd_ipversion),
+ portfwd_handler, P(pfd),
+ "Auto", NO_SHORTCUT, I(ADDRTYPE_UNSPEC),
+ "IPv4", NO_SHORTCUT, I(ADDRTYPE_IPV4),
+ "IPv6", NO_SHORTCUT, I(ADDRTYPE_IPV6),
+ NULL);
+#endif
ctrl_tabdelay(s, pfd->addbutton);
ctrl_columns(s, 1, 100);
s = ctrl_getset(b, "Connection/SSH/Bugs", "main",
"Detection of known bugs in SSH servers");
- ctrl_droplist(s, "Chokes on SSH1 ignore messages", 'i', 20,
+ ctrl_droplist(s, "Chokes on SSH-1 ignore messages", 'i', 20,
HELPCTX(ssh_bugs_ignore1),
sshbug_handler, I(offsetof(Config,sshbug_ignore1)));
- ctrl_droplist(s, "Refuses all SSH1 password camouflage", 's', 20,
+ ctrl_droplist(s, "Refuses all SSH-1 password camouflage", 's', 20,
HELPCTX(ssh_bugs_plainpw1),
sshbug_handler, I(offsetof(Config,sshbug_plainpw1)));
- ctrl_droplist(s, "Chokes on SSH1 RSA authentication", 'r', 20,
+ ctrl_droplist(s, "Chokes on SSH-1 RSA authentication", 'r', 20,
HELPCTX(ssh_bugs_rsa1),
sshbug_handler, I(offsetof(Config,sshbug_rsa1)));
- ctrl_droplist(s, "Miscomputes SSH2 HMAC keys", 'm', 20,
+ ctrl_droplist(s, "Miscomputes SSH-2 HMAC keys", 'm', 20,
HELPCTX(ssh_bugs_hmac2),
sshbug_handler, I(offsetof(Config,sshbug_hmac2)));
- ctrl_droplist(s, "Miscomputes SSH2 encryption keys", 'e', 20,
+ ctrl_droplist(s, "Miscomputes SSH-2 encryption keys", 'e', 20,
HELPCTX(ssh_bugs_derivekey2),
sshbug_handler, I(offsetof(Config,sshbug_derivekey2)));
- ctrl_droplist(s, "Requires padding on SSH2 RSA signatures", 'p', 20,
+ ctrl_droplist(s, "Requires padding on SSH-2 RSA signatures", 'p', 20,
HELPCTX(ssh_bugs_rsapad2),
sshbug_handler, I(offsetof(Config,sshbug_rsapad2)));
- ctrl_droplist(s, "Misuses the session ID in PK auth", 'n', 20,
+ ctrl_droplist(s, "Misuses the session ID in SSH-2 PK auth", 'n', 20,
HELPCTX(ssh_bugs_pksessid2),
sshbug_handler, I(offsetof(Config,sshbug_pksessid2)));
+ ctrl_droplist(s, "Handles SSH-2 key re-exchange badly", 'k', 20,
+ HELPCTX(ssh_bugs_rekey2),
+ sshbug_handler, I(offsetof(Config,sshbug_rekey2)));
}
}
}
projects / u / mdw / putty / blobdiff