+ if (c->u.a.lensofar >= 4 && len > 0) {
+ unsigned int l =
+ min(c->u.a.totallen - c->u.a.lensofar,
+ len);
+ memcpy(c->u.a.message + c->u.a.lensofar, p,
+ l);
+ p += l;
+ len -= l;
+ c->u.a.lensofar += l;
+ }
+ if (c->u.a.lensofar == c->u.a.totallen) {
+ void *reply;
+ int replylen;
+ if (agent_query(c->u.a.message,
+ c->u.a.totallen,
+ &reply, &replylen,
+ ssh_agentf_callback, c))
+ ssh_agentf_callback(c, reply, replylen);
+ sfree(c->u.a.message);
+ c->u.a.lensofar = 0;
+ }
+ }
+ bufsize = 0; /* agent channels never back up */
+ break;
+ }
+ if (!c->v.v1.throttling && bufsize > SSH1_BUFFER_LIMIT) {
+ c->v.v1.throttling = 1;
+ ssh1_throttle(ssh, +1);
+ }
+ }
+}
+
+static void ssh1_smsg_exit_status(Ssh ssh, struct Packet *pktin)
+{
+ ssh->exitcode = ssh_pkt_getuint32(pktin);
+ logeventf(ssh, "Server sent command exit status %d", ssh->exitcode);
+ send_packet(ssh, SSH1_CMSG_EXIT_CONFIRMATION, PKT_END);
+ /*
+ * In case `helpful' firewalls or proxies tack
+ * extra human-readable text on the end of the
+ * session which we might mistake for another
+ * encrypted packet, we close the session once
+ * we've sent EXIT_CONFIRMATION.
+ */
+ ssh_disconnect(ssh, NULL, NULL, 0, TRUE);
+}
+
+/* Helper function to deal with sending tty modes for REQUEST_PTY */
+static void ssh1_send_ttymode(void *data, char *mode, char *val)
+{
+ struct Packet *pktout = (struct Packet *)data;
+ int i = 0;
+ unsigned int arg = 0;
+ while (strcmp(mode, ssh_ttymodes[i].mode) != 0) i++;
+ if (i == lenof(ssh_ttymodes)) return;
+ switch (ssh_ttymodes[i].type) {
+ case TTY_OP_CHAR:
+ arg = ssh_tty_parse_specchar(val);
+ break;
+ case TTY_OP_BOOL:
+ arg = ssh_tty_parse_boolean(val);
+ break;
+ }
+ ssh2_pkt_addbyte(pktout, ssh_ttymodes[i].opcode);
+ ssh2_pkt_addbyte(pktout, arg);
+}
+
+
+static void do_ssh1_connection(Ssh ssh, unsigned char *in, int inlen,
+ struct Packet *pktin)
+{
+ crBegin(ssh->do_ssh1_connection_crstate);
+
+ ssh->packet_dispatch[SSH1_SMSG_STDOUT_DATA] =
+ ssh->packet_dispatch[SSH1_SMSG_STDERR_DATA] =
+ ssh1_smsg_stdout_stderr_data;
+
+ ssh->packet_dispatch[SSH1_MSG_CHANNEL_OPEN_CONFIRMATION] =
+ ssh1_msg_channel_open_confirmation;
+ ssh->packet_dispatch[SSH1_MSG_CHANNEL_OPEN_FAILURE] =
+ ssh1_msg_channel_open_failure;
+ ssh->packet_dispatch[SSH1_MSG_CHANNEL_CLOSE] =
+ ssh->packet_dispatch[SSH1_MSG_CHANNEL_CLOSE_CONFIRMATION] =
+ ssh1_msg_channel_close;
+ ssh->packet_dispatch[SSH1_MSG_CHANNEL_DATA] = ssh1_msg_channel_data;
+ ssh->packet_dispatch[SSH1_SMSG_EXIT_STATUS] = ssh1_smsg_exit_status;
+
+ if (ssh->cfg.agentfwd && agent_exists()) {
+ logevent("Requesting agent forwarding");
+ send_packet(ssh, SSH1_CMSG_AGENT_REQUEST_FORWARDING, PKT_END);
+ do {
+ crReturnV;
+ } while (!pktin);
+ if (pktin->type != SSH1_SMSG_SUCCESS
+ && pktin->type != SSH1_SMSG_FAILURE) {
+ bombout(("Protocol confusion"));
+ crStopV;
+ } else if (pktin->type == SSH1_SMSG_FAILURE) {
+ logevent("Agent forwarding refused");
+ } else {
+ logevent("Agent forwarding enabled");
+ ssh->agentfwd_enabled = TRUE;
+ ssh->packet_dispatch[SSH1_SMSG_AGENT_OPEN] = ssh1_smsg_agent_open;
+ }
+ }
+
+ if (ssh->cfg.x11_forward) {
+ char proto[20], data[64];
+ logevent("Requesting X11 forwarding");
+ ssh->x11auth = x11_invent_auth(proto, sizeof(proto),
+ data, sizeof(data), ssh->cfg.x11_auth);
+ x11_get_real_auth(ssh->x11auth, ssh->cfg.x11_display);
+ /*
+ * Note that while we blank the X authentication data here, we don't
+ * take any special action to blank the start of an X11 channel,
+ * so using MIT-MAGIC-COOKIE-1 and actually opening an X connection
+ * without having session blanking enabled is likely to leak your
+ * cookie into the log.
+ */
+ if (ssh->v1_local_protoflags & SSH1_PROTOFLAG_SCREEN_NUMBER) {
+ send_packet(ssh, SSH1_CMSG_X11_REQUEST_FORWARDING,
+ PKT_STR, proto,
+ PKTT_PASSWORD, PKT_STR, data, PKTT_OTHER,
+ PKT_INT, x11_get_screen_number(ssh->cfg.x11_display),
+ PKT_END);
+ } else {
+ send_packet(ssh, SSH1_CMSG_X11_REQUEST_FORWARDING,
+ PKT_STR, proto,
+ PKTT_PASSWORD, PKT_STR, data, PKTT_OTHER, PKT_END);
+ }
+ do {
+ crReturnV;
+ } while (!pktin);
+ if (pktin->type != SSH1_SMSG_SUCCESS
+ && pktin->type != SSH1_SMSG_FAILURE) {
+ bombout(("Protocol confusion"));
+ crStopV;
+ } else if (pktin->type == SSH1_SMSG_FAILURE) {
+ logevent("X11 forwarding refused");
+ } else {
+ logevent("X11 forwarding enabled");
+ ssh->X11_fwd_enabled = TRUE;
+ ssh->packet_dispatch[SSH1_SMSG_X11_OPEN] = ssh1_smsg_x11_open;
+ }
+ }
+
+ ssh_setup_portfwd(ssh, &ssh->cfg);
+ ssh->packet_dispatch[SSH1_MSG_PORT_OPEN] = ssh1_msg_port_open;
+
+ if (!ssh->cfg.nopty) {
+ struct Packet *pkt;
+ /* Unpick the terminal-speed string. */
+ /* XXX perhaps we should allow no speeds to be sent. */
+ ssh->ospeed = 38400; ssh->ispeed = 38400; /* last-resort defaults */
+ sscanf(ssh->cfg.termspeed, "%d,%d", &ssh->ospeed, &ssh->ispeed);
+ /* Send the pty request. */
+ pkt = ssh1_pkt_init(SSH1_CMSG_REQUEST_PTY);
+ ssh_pkt_addstring(pkt, ssh->cfg.termtype);
+ ssh_pkt_adduint32(pkt, ssh->term_height);
+ ssh_pkt_adduint32(pkt, ssh->term_width);
+ ssh_pkt_adduint32(pkt, 0); /* width in pixels */
+ ssh_pkt_adduint32(pkt, 0); /* height in pixels */
+ parse_ttymodes(ssh, ssh->cfg.ttymodes,
+ ssh1_send_ttymode, (void *)pkt);
+ ssh_pkt_addbyte(pkt, SSH1_TTY_OP_ISPEED);
+ ssh_pkt_adduint32(pkt, ssh->ispeed);
+ ssh_pkt_addbyte(pkt, SSH1_TTY_OP_OSPEED);
+ ssh_pkt_adduint32(pkt, ssh->ospeed);
+ ssh_pkt_addbyte(pkt, SSH_TTY_OP_END);
+ s_wrpkt(ssh, pkt);
+ ssh->state = SSH_STATE_INTERMED;
+ do {
+ crReturnV;
+ } while (!pktin);
+ if (pktin->type != SSH1_SMSG_SUCCESS
+ && pktin->type != SSH1_SMSG_FAILURE) {
+ bombout(("Protocol confusion"));
+ crStopV;
+ } else if (pktin->type == SSH1_SMSG_FAILURE) {
+ c_write_str(ssh, "Server refused to allocate pty\r\n");
+ ssh->editing = ssh->echoing = 1;
+ }
+ logeventf(ssh, "Allocated pty (ospeed %dbps, ispeed %dbps)",
+ ssh->ospeed, ssh->ispeed);
+ } else {
+ ssh->editing = ssh->echoing = 1;
+ }
+
+ if (ssh->cfg.compression) {
+ send_packet(ssh, SSH1_CMSG_REQUEST_COMPRESSION, PKT_INT, 6, PKT_END);
+ do {
+ crReturnV;
+ } while (!pktin);
+ if (pktin->type != SSH1_SMSG_SUCCESS
+ && pktin->type != SSH1_SMSG_FAILURE) {
+ bombout(("Protocol confusion"));
+ crStopV;
+ } else if (pktin->type == SSH1_SMSG_FAILURE) {
+ c_write_str(ssh, "Server refused to compress\r\n");
+ }
+ logevent("Started compression");
+ ssh->v1_compressing = TRUE;
+ ssh->cs_comp_ctx = zlib_compress_init();
+ logevent("Initialised zlib (RFC1950) compression");
+ ssh->sc_comp_ctx = zlib_decompress_init();
+ logevent("Initialised zlib (RFC1950) decompression");
+ }
+
+ /*
+ * Start the shell or command.
+ *
+ * Special case: if the first-choice command is an SSH-2
+ * subsystem (hence not usable here) and the second choice
+ * exists, we fall straight back to that.
+ */
+ {
+ char *cmd = ssh->cfg.remote_cmd_ptr;
+
+ if (!cmd) cmd = ssh->cfg.remote_cmd;
+
+ if (ssh->cfg.ssh_subsys && ssh->cfg.remote_cmd_ptr2) {
+ cmd = ssh->cfg.remote_cmd_ptr2;
+ ssh->fallback_cmd = TRUE;
+ }
+ if (*cmd)
+ send_packet(ssh, SSH1_CMSG_EXEC_CMD, PKT_STR, cmd, PKT_END);
+ else
+ send_packet(ssh, SSH1_CMSG_EXEC_SHELL, PKT_END);
+ logevent("Started session");
+ }
+
+ ssh->state = SSH_STATE_SESSION;
+ if (ssh->size_needed)
+ ssh_size(ssh, ssh->term_width, ssh->term_height);
+ if (ssh->eof_needed)
+ ssh_special(ssh, TS_EOF);
+
+ if (ssh->ldisc)
+ ldisc_send(ssh->ldisc, NULL, 0, 0);/* cause ldisc to notice changes */
+ ssh->send_ok = 1;
+ ssh->channels = newtree234(ssh_channelcmp);
+ while (1) {
+
+ /*
+ * By this point, most incoming packets are already being
+ * handled by the dispatch table, and we need only pay
+ * attention to the unusual ones.
+ */
+
+ crReturnV;
+ if (pktin) {
+ if (pktin->type == SSH1_SMSG_SUCCESS) {