-\versionid $Id: config.but,v 1.21 2001/12/14 14:57:50 simon Exp $
+\versionid $Id: config.but,v 1.27 2002/03/06 23:04:20 simon Exp $
\C{config} Configuring PuTTY
be empty, this problem should go away, but doing so might cause
other problems.
+Note that this is \e{not} the feature of PuTTY which the server will
+typically use to determine your terminal type. That feature is the
+\q{Terminal-type string} in the Connection panel; see
+\k{config-termtype} for details.
+
\S{config-localecho} \q{Local echo}
\cfg{winhelp-topic}{terminal.localecho}
Application Cursor Keys mode can be turned on and off by the server,
depending on the application. PuTTY allows you to configure the
-initial state, and also allows you to disable application mode
-completely.
+initial state.
+
+You can also disable application cursor keys mode completely, using
+the \q{Features} configuration panel; see
+\k{config-features-application}.
\S{config-appkeypad} Controlling Application Keypad mode
Application keypad mode can be turned on and off by the server,
depending on the application. PuTTY allows you to configure the
-initial state, and also allows you to disable application mode
-completely.
+initial state.
+
+You can also disable application keypad mode completely, using the
+\q{Features} configuration panel; see
+\k{config-features-application}.
\S{config-nethack} Using NetHack keypad mode
in to do so, and how much silent time is required before the
overload feature will deactivate itself.
+\H{config-features} The Features panel
+
+PuTTY's terminal emulation is very highly featured, and can do a lot
+of things under remote server control. Some of these features can
+cause problems due to buggy or strangely configured server
+applications.
+
+The Features configuration panel allows you to disable some of
+PuTTY's more advanced terminal features, in case they cause trouble.
+
+\S{config-features-application} Disabling application keypad and cursor keys
+
+\cfg{winhelp-topic}{features.application}
+
+Application keypad mode (see \k{config-appkeypad}) and application
+cursor keys mode (see \k{config-appcursor}) alter the behaviour of
+the keypad and cursor keys. Some applications enable these modes but
+then do not deal correctly with the modified keys. You can force
+these modes to be permanently disabled no matter what the server
+tries to do.
+
+\S{config-features-resize} Disabling remote terminal resizing
+
+\cfg{winhelp-topic}{features.resize}
+
+PuTTY has the ability to change the terminal's size and position in
+response to commands from the server. If you find PuTTY is doing
+this unexpectedly or inconveniently, you can tell PuTTY not to
+respond to those server commands.
+
+\S{config-features-altscreen} Disabling switching to the alternate screen
+
+\cfg{winhelp-topic}{features.altscreen}
+
+Many terminals, including PuTTY, support an \q{alternate screen}.
+This is the same size as the ordinary terminal screen, but separate.
+Typically a screen-based program such as a text editor might switch
+the terminal to the alternate screen before starting up. Then at the
+end of the run, it switches back to the primary screen, and you see
+the screen contents just as they were before starting the editor.
+
+Some people prefer this not to happen. If you want your editor to
+run in the same screen as the rest of your terminal activity, you
+can disable the alternate screen feature completely.
+
+\S{config-features-retitle} Disabling remote window title changing
+
+\cfg{winhelp-topic}{features.retitle}
+
+PuTTY has the ability to change the window title in response to
+commands from the server. If you find PuTTY is doing this
+unexpectedly or inconveniently, you can tell PuTTY not to respond to
+those server commands.
+
+\S{config-features-dbackspace} Disabling destructive backspace
+
+\cfg{winhelp-topic}{features.dbackspace}
+
+Normally, when PuTTY receives character 127 (^?) from the server, it
+will perform a \q{destructive backspace}: move the cursor one space
+left and delete the character under it. This can apparently cause
+problems in some applications, so PuTTY provides the ability to
+configure character 127 to perform a normal backspace (without
+deleting a character) instead.
+
+\S{config-features-charset} Disabling remote character set
+configuration
+
+\cfg{winhelp-topic}{features.charset}
+
+PuTTY has the ability to change its character set configuration in
+response to commands from the server. Some programs send these
+commands unexpectedly or inconveniently. In particular, BitchX (an
+IRC client) seems to have a habit of reconfiguring the character set
+to something other than the user intended.
+
+If you find that accented characters are not showing up the way you
+expect them to, particularly if you're running BitchX, you could try
+disabling the remote character set configuration commands.
+
\H{config-window} The Window panel
The Window configuration panel allows you to control aspects of the
This mechanism currently only covers ASCII characters, because it
isn't feasible to expand the list to cover the whole of Unicode.
+Character class definitions can be modified by control sequences
+sent by the server. This configuration option only controls the
+\e{default} state. If you modify this option in mid-session using
+\q{Change Settings}, you will need to reset the terminal (see
+\k{reset-terminal}) before the change takes effect.
+
\H{config-colours} The Colours panel
The Colours panel allows you to control PuTTY's use of colour.
Telnet special interrupt code. You probably shouldn't enable this
unless you know what you're doing.
+\S{config-telnetnl} \q{Return key sends telnet New Line instead of ^M}
+
+\cfg{winhelp-topic}{telnet.newline}
+
+Unlike most other remote login protocols, the Telnet protocol has a
+special \q{new line} code that is not the same as the usual line
+endings of Control-M or Control-J. By default, PuTTY sends the
+Telnet New Line code when you press Return, instead of sending
+Control-M as it does in most other protocols.
+
+Most Unix-style Telnet servers don't mind whether they receive
+Telnet New Line or Control-M; some servers do expect New Line, and
+some servers prefer to see ^M. If you are seeing surprising
+behaviour when you press Return in a Telnet session, you might try
+turning this option off to see if it helps.
+
\H{config-rlogin} The Rlogin panel
The Rlogin panel allows you to configure options that only apply to
To remove a port forwarding, simply select its details in the list
box, and click the \q{Remove} button.
+\S{config-ssh-portfwd-localhost} Controlling the visibility of
+forwarded ports
+
+\cfg{winhelp-topic}{ssh.tunnels.portfwd.localhost}
+
+The source port for a forwarded connection usually does not accept
+connections from any machine except the SSH client or server machine
+itself (for local and remote forwardings respectively). There are
+controls in the Tunnels panel to change this:
+
+\b The \q{Local ports accept connections from other hosts} option
+allows you to set up local-to-remote port forwardings in such a way
+that machines other than your client PC can connect to the forwarded
+port.
+
+\b The \q{Remote ports do the same} option does the same thing for
+remote-to-local port forwardings (so that machines other than the
+SSH server machine can connect to the forwarded port.) Note that
+this feature is only available in the SSH 2 protocol, and not all
+SSH 2 servers support it (OpenSSH 3.0 does not, for example).
+
\H{config-file} Storing configuration in a file
PuTTY does not currently support storing its configuration in a file