| 1 | #include <windows.h> |
| 2 | #include <imm.h> |
| 3 | #include <commctrl.h> |
| 4 | #include <richedit.h> |
| 5 | #include <mmsystem.h> |
| 6 | #ifndef AUTO_WINSOCK |
| 7 | #ifdef WINSOCK_TWO |
| 8 | #include <winsock2.h> |
| 9 | #else |
| 10 | #include <winsock.h> |
| 11 | #endif |
| 12 | #endif |
| 13 | |
| 14 | #include <stdio.h> |
| 15 | #include <stdlib.h> |
| 16 | #include <ctype.h> |
| 17 | #include <time.h> |
| 18 | #include <assert.h> |
| 19 | |
| 20 | #define PUTTY_DO_GLOBALS /* actually _define_ globals */ |
| 21 | #include "putty.h" |
| 22 | #include "winstuff.h" |
| 23 | #include "storage.h" |
| 24 | #include "win_res.h" |
| 25 | |
| 26 | #define IDM_SHOWLOG 0x0010 |
| 27 | #define IDM_NEWSESS 0x0020 |
| 28 | #define IDM_DUPSESS 0x0030 |
| 29 | #define IDM_RECONF 0x0040 |
| 30 | #define IDM_CLRSB 0x0050 |
| 31 | #define IDM_RESET 0x0060 |
| 32 | #define IDM_TEL_AYT 0x0070 |
| 33 | #define IDM_TEL_BRK 0x0080 |
| 34 | #define IDM_TEL_SYNCH 0x0090 |
| 35 | #define IDM_TEL_EC 0x00a0 |
| 36 | #define IDM_TEL_EL 0x00b0 |
| 37 | #define IDM_TEL_GA 0x00c0 |
| 38 | #define IDM_TEL_NOP 0x00d0 |
| 39 | #define IDM_TEL_ABORT 0x00e0 |
| 40 | #define IDM_TEL_AO 0x00f0 |
| 41 | #define IDM_TEL_IP 0x0100 |
| 42 | #define IDM_TEL_SUSP 0x0110 |
| 43 | #define IDM_TEL_EOR 0x0120 |
| 44 | #define IDM_TEL_EOF 0x0130 |
| 45 | #define IDM_ABOUT 0x0140 |
| 46 | #define IDM_SAVEDSESS 0x0150 |
| 47 | #define IDM_COPYALL 0x0160 |
| 48 | #define IDM_FULLSCREEN 0x0170 |
| 49 | |
| 50 | #define IDM_SESSLGP 0x0250 /* log type printable */ |
| 51 | #define IDM_SESSLGA 0x0260 /* log type all chars */ |
| 52 | #define IDM_SESSLGE 0x0270 /* log end */ |
| 53 | #define IDM_SAVED_MIN 0x1000 |
| 54 | #define IDM_SAVED_MAX 0x2000 |
| 55 | |
| 56 | #define WM_IGNORE_CLIP (WM_XUSER + 2) |
| 57 | |
| 58 | /* Needed for Chinese support and apparently not always defined. */ |
| 59 | #ifndef VK_PROCESSKEY |
| 60 | #define VK_PROCESSKEY 0xE5 |
| 61 | #endif |
| 62 | |
| 63 | /* Needed for mouse wheel support and not defined in earlier SDKs. */ |
| 64 | #ifndef WM_MOUSEWHEEL |
| 65 | #define WM_MOUSEWHEEL 0x020A |
| 66 | #endif |
| 67 | |
| 68 | static LRESULT CALLBACK WndProc(HWND, UINT, WPARAM, LPARAM); |
| 69 | static int TranslateKey(UINT message, WPARAM wParam, LPARAM lParam, |
| 70 | unsigned char *output); |
| 71 | static void cfgtopalette(void); |
| 72 | static void init_palette(void); |
| 73 | static void init_fonts(int, int); |
| 74 | static void another_font(int); |
| 75 | static void deinit_fonts(void); |
| 76 | |
| 77 | /* Window layout information */ |
| 78 | static void reset_window(int); |
| 79 | static int full_screen = 0; |
| 80 | static int extra_width, extra_height; |
| 81 | static int font_width, font_height, font_dualwidth; |
| 82 | static int offset_width, offset_height; |
| 83 | static int was_zoomed = 0; |
| 84 | static int prev_rows, prev_cols; |
| 85 | |
| 86 | static int pending_netevent = 0; |
| 87 | static WPARAM pend_netevent_wParam = 0; |
| 88 | static LPARAM pend_netevent_lParam = 0; |
| 89 | static void enact_pending_netevent(void); |
| 90 | static void flash_window(int mode); |
| 91 | static void flip_full_screen(void); |
| 92 | |
| 93 | static time_t last_movement = 0; |
| 94 | |
| 95 | #define FONT_NORMAL 0 |
| 96 | #define FONT_BOLD 1 |
| 97 | #define FONT_UNDERLINE 2 |
| 98 | #define FONT_BOLDUND 3 |
| 99 | #define FONT_WIDE 0x04 |
| 100 | #define FONT_HIGH 0x08 |
| 101 | #define FONT_NARROW 0x10 |
| 102 | |
| 103 | #define FONT_OEM 0x20 |
| 104 | #define FONT_OEMBOLD 0x21 |
| 105 | #define FONT_OEMUND 0x22 |
| 106 | #define FONT_OEMBOLDUND 0x23 |
| 107 | |
| 108 | #define FONT_MAXNO 0x2F |
| 109 | #define FONT_SHIFT 5 |
| 110 | static HFONT fonts[FONT_MAXNO]; |
| 111 | static LOGFONT lfont; |
| 112 | static int fontflag[FONT_MAXNO]; |
| 113 | static enum { |
| 114 | BOLD_COLOURS, BOLD_SHADOW, BOLD_FONT |
| 115 | } bold_mode; |
| 116 | static enum { |
| 117 | UND_LINE, UND_FONT |
| 118 | } und_mode; |
| 119 | static int descent; |
| 120 | |
| 121 | #define NCOLOURS 24 |
| 122 | static COLORREF colours[NCOLOURS]; |
| 123 | static HPALETTE pal; |
| 124 | static LPLOGPALETTE logpal; |
| 125 | static RGBTRIPLE defpal[NCOLOURS]; |
| 126 | |
| 127 | static HWND hwnd; |
| 128 | |
| 129 | static HBITMAP caretbm; |
| 130 | |
| 131 | static int dbltime, lasttime, lastact; |
| 132 | static Mouse_Button lastbtn; |
| 133 | |
| 134 | /* this allows xterm-style mouse handling. */ |
| 135 | static int send_raw_mouse = 0; |
| 136 | static int wheel_accumulator = 0; |
| 137 | |
| 138 | static char *window_name, *icon_name; |
| 139 | |
| 140 | static int compose_state = 0; |
| 141 | |
| 142 | static OSVERSIONINFO osVersion; |
| 143 | |
| 144 | /* Dummy routine, only required in plink. */ |
| 145 | void ldisc_update(int echo, int edit) |
| 146 | { |
| 147 | } |
| 148 | |
| 149 | int WINAPI WinMain(HINSTANCE inst, HINSTANCE prev, LPSTR cmdline, int show) |
| 150 | { |
| 151 | static char appname[] = "PuTTY"; |
| 152 | WORD winsock_ver; |
| 153 | WSADATA wsadata; |
| 154 | WNDCLASS wndclass; |
| 155 | MSG msg; |
| 156 | int guess_width, guess_height; |
| 157 | |
| 158 | hinst = inst; |
| 159 | flags = FLAG_VERBOSE | FLAG_INTERACTIVE; |
| 160 | |
| 161 | winsock_ver = MAKEWORD(1, 1); |
| 162 | if (WSAStartup(winsock_ver, &wsadata)) { |
| 163 | MessageBox(NULL, "Unable to initialise WinSock", "WinSock Error", |
| 164 | MB_OK | MB_ICONEXCLAMATION); |
| 165 | return 1; |
| 166 | } |
| 167 | if (LOBYTE(wsadata.wVersion) != 1 || HIBYTE(wsadata.wVersion) != 1) { |
| 168 | MessageBox(NULL, "WinSock version is incompatible with 1.1", |
| 169 | "WinSock Error", MB_OK | MB_ICONEXCLAMATION); |
| 170 | WSACleanup(); |
| 171 | return 1; |
| 172 | } |
| 173 | /* WISHLIST: maybe allow config tweaking even if winsock not present? */ |
| 174 | sk_init(); |
| 175 | |
| 176 | InitCommonControls(); |
| 177 | |
| 178 | /* Ensure a Maximize setting in Explorer doesn't maximise the |
| 179 | * config box. */ |
| 180 | defuse_showwindow(); |
| 181 | |
| 182 | { |
| 183 | ZeroMemory(&osVersion, sizeof(osVersion)); |
| 184 | osVersion.dwOSVersionInfoSize = sizeof (OSVERSIONINFO); |
| 185 | if (!GetVersionEx ( (OSVERSIONINFO *) &osVersion)) { |
| 186 | MessageBox(NULL, "Windows refuses to report a version", |
| 187 | "PuTTY Fatal Error", MB_OK | MB_ICONEXCLAMATION); |
| 188 | return 1; |
| 189 | } |
| 190 | } |
| 191 | |
| 192 | /* |
| 193 | * Process the command line. |
| 194 | */ |
| 195 | { |
| 196 | char *p; |
| 197 | |
| 198 | default_protocol = DEFAULT_PROTOCOL; |
| 199 | default_port = DEFAULT_PORT; |
| 200 | cfg.logtype = LGTYP_NONE; |
| 201 | |
| 202 | do_defaults(NULL, &cfg); |
| 203 | |
| 204 | p = cmdline; |
| 205 | while (*p && isspace(*p)) |
| 206 | p++; |
| 207 | |
| 208 | /* |
| 209 | * Process command line options first. Yes, this can be |
| 210 | * done better, and it will be as soon as I have the |
| 211 | * energy... |
| 212 | */ |
| 213 | while (*p == '-') { |
| 214 | char *q = p + strcspn(p, " \t"); |
| 215 | p++; |
| 216 | if (q == p + 3 && |
| 217 | tolower(p[0]) == 's' && |
| 218 | tolower(p[1]) == 's' && tolower(p[2]) == 'h') { |
| 219 | default_protocol = cfg.protocol = PROT_SSH; |
| 220 | default_port = cfg.port = 22; |
| 221 | } else if (q == p + 7 && |
| 222 | tolower(p[0]) == 'c' && |
| 223 | tolower(p[1]) == 'l' && |
| 224 | tolower(p[2]) == 'e' && |
| 225 | tolower(p[3]) == 'a' && |
| 226 | tolower(p[4]) == 'n' && |
| 227 | tolower(p[5]) == 'u' && tolower(p[6]) == 'p') { |
| 228 | /* |
| 229 | * `putty -cleanup'. Remove all registry entries |
| 230 | * associated with PuTTY, and also find and delete |
| 231 | * the random seed file. |
| 232 | */ |
| 233 | if (MessageBox(NULL, |
| 234 | "This procedure will remove ALL Registry\n" |
| 235 | "entries associated with PuTTY, and will\n" |
| 236 | "also remove the PuTTY random seed file.\n" |
| 237 | "\n" |
| 238 | "THIS PROCESS WILL DESTROY YOUR SAVED\n" |
| 239 | "SESSIONS. Are you really sure you want\n" |
| 240 | "to continue?", |
| 241 | "PuTTY Warning", |
| 242 | MB_YESNO | MB_ICONWARNING) == IDYES) { |
| 243 | cleanup_all(); |
| 244 | } |
| 245 | exit(0); |
| 246 | } |
| 247 | p = q + strspn(q, " \t"); |
| 248 | } |
| 249 | |
| 250 | /* |
| 251 | * An initial @ means to activate a saved session. |
| 252 | */ |
| 253 | if (*p == '@') { |
| 254 | int i = strlen(p); |
| 255 | while (i > 1 && isspace(p[i - 1])) |
| 256 | i--; |
| 257 | p[i] = '\0'; |
| 258 | do_defaults(p + 1, &cfg); |
| 259 | if (!*cfg.host && !do_config()) { |
| 260 | WSACleanup(); |
| 261 | return 0; |
| 262 | } |
| 263 | } else if (*p == '&') { |
| 264 | /* |
| 265 | * An initial & means we've been given a command line |
| 266 | * containing the hex value of a HANDLE for a file |
| 267 | * mapping object, which we must then extract as a |
| 268 | * config. |
| 269 | */ |
| 270 | HANDLE filemap; |
| 271 | Config *cp; |
| 272 | if (sscanf(p + 1, "%p", &filemap) == 1 && |
| 273 | (cp = MapViewOfFile(filemap, FILE_MAP_READ, |
| 274 | 0, 0, sizeof(Config))) != NULL) { |
| 275 | cfg = *cp; |
| 276 | UnmapViewOfFile(cp); |
| 277 | CloseHandle(filemap); |
| 278 | } else if (!do_config()) { |
| 279 | WSACleanup(); |
| 280 | return 0; |
| 281 | } |
| 282 | } else if (*p) { |
| 283 | char *q = p; |
| 284 | /* |
| 285 | * If the hostname starts with "telnet:", set the |
| 286 | * protocol to Telnet and process the string as a |
| 287 | * Telnet URL. |
| 288 | */ |
| 289 | if (!strncmp(q, "telnet:", 7)) { |
| 290 | char c; |
| 291 | |
| 292 | q += 7; |
| 293 | if (q[0] == '/' && q[1] == '/') |
| 294 | q += 2; |
| 295 | cfg.protocol = PROT_TELNET; |
| 296 | p = q; |
| 297 | while (*p && *p != ':' && *p != '/') |
| 298 | p++; |
| 299 | c = *p; |
| 300 | if (*p) |
| 301 | *p++ = '\0'; |
| 302 | if (c == ':') |
| 303 | cfg.port = atoi(p); |
| 304 | else |
| 305 | cfg.port = -1; |
| 306 | strncpy(cfg.host, q, sizeof(cfg.host) - 1); |
| 307 | cfg.host[sizeof(cfg.host) - 1] = '\0'; |
| 308 | } else { |
| 309 | while (*p && !isspace(*p)) |
| 310 | p++; |
| 311 | if (*p) |
| 312 | *p++ = '\0'; |
| 313 | strncpy(cfg.host, q, sizeof(cfg.host) - 1); |
| 314 | cfg.host[sizeof(cfg.host) - 1] = '\0'; |
| 315 | while (*p && isspace(*p)) |
| 316 | p++; |
| 317 | if (*p) |
| 318 | cfg.port = atoi(p); |
| 319 | else |
| 320 | cfg.port = -1; |
| 321 | } |
| 322 | } else { |
| 323 | if (!do_config()) { |
| 324 | WSACleanup(); |
| 325 | return 0; |
| 326 | } |
| 327 | } |
| 328 | |
| 329 | /* |
| 330 | * Trim leading whitespace off the hostname if it's there. |
| 331 | */ |
| 332 | { |
| 333 | int space = strspn(cfg.host, " \t"); |
| 334 | memmove(cfg.host, cfg.host+space, 1+strlen(cfg.host)-space); |
| 335 | } |
| 336 | |
| 337 | /* See if host is of the form user@host */ |
| 338 | if (cfg.host[0] != '\0') { |
| 339 | char *atsign = strchr(cfg.host, '@'); |
| 340 | /* Make sure we're not overflowing the user field */ |
| 341 | if (atsign) { |
| 342 | if (atsign - cfg.host < sizeof cfg.username) { |
| 343 | strncpy(cfg.username, cfg.host, atsign - cfg.host); |
| 344 | cfg.username[atsign - cfg.host] = '\0'; |
| 345 | } |
| 346 | memmove(cfg.host, atsign + 1, 1 + strlen(atsign + 1)); |
| 347 | } |
| 348 | } |
| 349 | |
| 350 | /* |
| 351 | * Trim a colon suffix off the hostname if it's there. |
| 352 | */ |
| 353 | cfg.host[strcspn(cfg.host, ":")] = '\0'; |
| 354 | } |
| 355 | |
| 356 | /* |
| 357 | * Select protocol. This is farmed out into a table in a |
| 358 | * separate file to enable an ssh-free variant. |
| 359 | */ |
| 360 | { |
| 361 | int i; |
| 362 | back = NULL; |
| 363 | for (i = 0; backends[i].backend != NULL; i++) |
| 364 | if (backends[i].protocol == cfg.protocol) { |
| 365 | back = backends[i].backend; |
| 366 | break; |
| 367 | } |
| 368 | if (back == NULL) { |
| 369 | MessageBox(NULL, "Unsupported protocol number found", |
| 370 | "PuTTY Internal Error", MB_OK | MB_ICONEXCLAMATION); |
| 371 | WSACleanup(); |
| 372 | return 1; |
| 373 | } |
| 374 | } |
| 375 | |
| 376 | /* Check for invalid Port number (i.e. zero) */ |
| 377 | if (cfg.port == 0) { |
| 378 | MessageBox(NULL, "Invalid Port Number", |
| 379 | "PuTTY Internal Error", MB_OK | MB_ICONEXCLAMATION); |
| 380 | WSACleanup(); |
| 381 | return 1; |
| 382 | } |
| 383 | |
| 384 | if (!prev) { |
| 385 | wndclass.style = 0; |
| 386 | wndclass.lpfnWndProc = WndProc; |
| 387 | wndclass.cbClsExtra = 0; |
| 388 | wndclass.cbWndExtra = 0; |
| 389 | wndclass.hInstance = inst; |
| 390 | wndclass.hIcon = LoadIcon(inst, MAKEINTRESOURCE(IDI_MAINICON)); |
| 391 | wndclass.hCursor = LoadCursor(NULL, IDC_IBEAM); |
| 392 | wndclass.hbrBackground = NULL; |
| 393 | wndclass.lpszMenuName = NULL; |
| 394 | wndclass.lpszClassName = appname; |
| 395 | |
| 396 | RegisterClass(&wndclass); |
| 397 | } |
| 398 | |
| 399 | hwnd = NULL; |
| 400 | |
| 401 | savelines = cfg.savelines; |
| 402 | term_init(); |
| 403 | |
| 404 | cfgtopalette(); |
| 405 | |
| 406 | /* |
| 407 | * Guess some defaults for the window size. This all gets |
| 408 | * updated later, so we don't really care too much. However, we |
| 409 | * do want the font width/height guesses to correspond to a |
| 410 | * large font rather than a small one... |
| 411 | */ |
| 412 | |
| 413 | font_width = 10; |
| 414 | font_height = 20; |
| 415 | extra_width = 25; |
| 416 | extra_height = 28; |
| 417 | term_size(cfg.height, cfg.width, cfg.savelines); |
| 418 | guess_width = extra_width + font_width * cols; |
| 419 | guess_height = extra_height + font_height * rows; |
| 420 | { |
| 421 | RECT r; |
| 422 | HWND w = GetDesktopWindow(); |
| 423 | GetWindowRect(w, &r); |
| 424 | if (guess_width > r.right - r.left) |
| 425 | guess_width = r.right - r.left; |
| 426 | if (guess_height > r.bottom - r.top) |
| 427 | guess_height = r.bottom - r.top; |
| 428 | } |
| 429 | |
| 430 | { |
| 431 | int winmode = WS_OVERLAPPEDWINDOW | WS_VSCROLL; |
| 432 | int exwinmode = 0; |
| 433 | if (!cfg.scrollbar) |
| 434 | winmode &= ~(WS_VSCROLL); |
| 435 | if (cfg.resize_action == RESIZE_DISABLED) |
| 436 | winmode &= ~(WS_THICKFRAME | WS_MAXIMIZEBOX); |
| 437 | if (cfg.alwaysontop) |
| 438 | exwinmode |= WS_EX_TOPMOST; |
| 439 | if (cfg.sunken_edge) |
| 440 | exwinmode |= WS_EX_CLIENTEDGE; |
| 441 | hwnd = CreateWindowEx(exwinmode, appname, appname, |
| 442 | winmode, CW_USEDEFAULT, CW_USEDEFAULT, |
| 443 | guess_width, guess_height, |
| 444 | NULL, NULL, inst, NULL); |
| 445 | } |
| 446 | |
| 447 | /* |
| 448 | * Initialise the fonts, simultaneously correcting the guesses |
| 449 | * for font_{width,height}. |
| 450 | */ |
| 451 | init_fonts(0,0); |
| 452 | |
| 453 | /* |
| 454 | * Correct the guesses for extra_{width,height}. |
| 455 | */ |
| 456 | { |
| 457 | RECT cr, wr; |
| 458 | GetWindowRect(hwnd, &wr); |
| 459 | GetClientRect(hwnd, &cr); |
| 460 | offset_width = offset_height = cfg.window_border; |
| 461 | extra_width = wr.right - wr.left - cr.right + cr.left + offset_width*2; |
| 462 | extra_height = wr.bottom - wr.top - cr.bottom + cr.top +offset_height*2; |
| 463 | } |
| 464 | |
| 465 | /* |
| 466 | * Resize the window, now we know what size we _really_ want it |
| 467 | * to be. |
| 468 | */ |
| 469 | guess_width = extra_width + font_width * cols; |
| 470 | guess_height = extra_height + font_height * rows; |
| 471 | SetWindowPos(hwnd, NULL, 0, 0, guess_width, guess_height, |
| 472 | SWP_NOMOVE | SWP_NOREDRAW | SWP_NOZORDER); |
| 473 | |
| 474 | /* |
| 475 | * Set up a caret bitmap, with no content. |
| 476 | */ |
| 477 | { |
| 478 | char *bits; |
| 479 | int size = (font_width + 15) / 16 * 2 * font_height; |
| 480 | bits = smalloc(size); |
| 481 | memset(bits, 0, size); |
| 482 | caretbm = CreateBitmap(font_width, font_height, 1, 1, bits); |
| 483 | sfree(bits); |
| 484 | } |
| 485 | CreateCaret(hwnd, caretbm, font_width, font_height); |
| 486 | |
| 487 | /* |
| 488 | * Initialise the scroll bar. |
| 489 | */ |
| 490 | { |
| 491 | SCROLLINFO si; |
| 492 | |
| 493 | si.cbSize = sizeof(si); |
| 494 | si.fMask = SIF_ALL | SIF_DISABLENOSCROLL; |
| 495 | si.nMin = 0; |
| 496 | si.nMax = rows - 1; |
| 497 | si.nPage = rows; |
| 498 | si.nPos = 0; |
| 499 | SetScrollInfo(hwnd, SB_VERT, &si, FALSE); |
| 500 | } |
| 501 | |
| 502 | /* |
| 503 | * Start up the telnet connection. |
| 504 | */ |
| 505 | { |
| 506 | char *error; |
| 507 | char msg[1024], *title; |
| 508 | char *realhost; |
| 509 | |
| 510 | error = back->init(cfg.host, cfg.port, &realhost); |
| 511 | if (error) { |
| 512 | sprintf(msg, "Unable to open connection to\n" |
| 513 | "%.800s\n" "%s", cfg.host, error); |
| 514 | MessageBox(NULL, msg, "PuTTY Error", MB_ICONERROR | MB_OK); |
| 515 | return 0; |
| 516 | } |
| 517 | window_name = icon_name = NULL; |
| 518 | if (*cfg.wintitle) { |
| 519 | title = cfg.wintitle; |
| 520 | } else { |
| 521 | sprintf(msg, "%s - PuTTY", realhost); |
| 522 | title = msg; |
| 523 | } |
| 524 | sfree(realhost); |
| 525 | set_title(title); |
| 526 | set_icon(title); |
| 527 | } |
| 528 | |
| 529 | session_closed = FALSE; |
| 530 | |
| 531 | /* |
| 532 | * Prepare the mouse handler. |
| 533 | */ |
| 534 | lastact = MA_NOTHING; |
| 535 | lastbtn = MBT_NOTHING; |
| 536 | dbltime = GetDoubleClickTime(); |
| 537 | |
| 538 | /* |
| 539 | * Set up the session-control options on the system menu. |
| 540 | */ |
| 541 | { |
| 542 | HMENU m = GetSystemMenu(hwnd, FALSE); |
| 543 | HMENU p, s; |
| 544 | int i; |
| 545 | |
| 546 | AppendMenu(m, MF_SEPARATOR, 0, 0); |
| 547 | if (cfg.protocol == PROT_TELNET) { |
| 548 | p = CreateMenu(); |
| 549 | AppendMenu(p, MF_ENABLED, IDM_TEL_AYT, "Are You There"); |
| 550 | AppendMenu(p, MF_ENABLED, IDM_TEL_BRK, "Break"); |
| 551 | AppendMenu(p, MF_ENABLED, IDM_TEL_SYNCH, "Synch"); |
| 552 | AppendMenu(p, MF_SEPARATOR, 0, 0); |
| 553 | AppendMenu(p, MF_ENABLED, IDM_TEL_EC, "Erase Character"); |
| 554 | AppendMenu(p, MF_ENABLED, IDM_TEL_EL, "Erase Line"); |
| 555 | AppendMenu(p, MF_ENABLED, IDM_TEL_GA, "Go Ahead"); |
| 556 | AppendMenu(p, MF_ENABLED, IDM_TEL_NOP, "No Operation"); |
| 557 | AppendMenu(p, MF_SEPARATOR, 0, 0); |
| 558 | AppendMenu(p, MF_ENABLED, IDM_TEL_ABORT, "Abort Process"); |
| 559 | AppendMenu(p, MF_ENABLED, IDM_TEL_AO, "Abort Output"); |
| 560 | AppendMenu(p, MF_ENABLED, IDM_TEL_IP, "Interrupt Process"); |
| 561 | AppendMenu(p, MF_ENABLED, IDM_TEL_SUSP, "Suspend Process"); |
| 562 | AppendMenu(p, MF_SEPARATOR, 0, 0); |
| 563 | AppendMenu(p, MF_ENABLED, IDM_TEL_EOR, "End Of Record"); |
| 564 | AppendMenu(p, MF_ENABLED, IDM_TEL_EOF, "End Of File"); |
| 565 | AppendMenu(m, MF_POPUP | MF_ENABLED, (UINT) p, |
| 566 | "Telnet Command"); |
| 567 | AppendMenu(m, MF_SEPARATOR, 0, 0); |
| 568 | } |
| 569 | AppendMenu(m, MF_ENABLED, IDM_SHOWLOG, "&Event Log"); |
| 570 | AppendMenu(m, MF_SEPARATOR, 0, 0); |
| 571 | AppendMenu(m, MF_ENABLED, IDM_NEWSESS, "Ne&w Session..."); |
| 572 | AppendMenu(m, MF_ENABLED, IDM_DUPSESS, "&Duplicate Session"); |
| 573 | s = CreateMenu(); |
| 574 | get_sesslist(TRUE); |
| 575 | for (i = 1; i < ((nsessions < 256) ? nsessions : 256); i++) |
| 576 | AppendMenu(s, MF_ENABLED, IDM_SAVED_MIN + (16 * i), |
| 577 | sessions[i]); |
| 578 | AppendMenu(m, MF_POPUP | MF_ENABLED, (UINT) s, "Sa&ved Sessions"); |
| 579 | AppendMenu(m, MF_ENABLED, IDM_RECONF, "Chan&ge Settings..."); |
| 580 | AppendMenu(m, MF_SEPARATOR, 0, 0); |
| 581 | AppendMenu(m, MF_ENABLED, IDM_COPYALL, "C&opy All to Clipboard"); |
| 582 | AppendMenu(m, MF_ENABLED, IDM_CLRSB, "C&lear Scrollback"); |
| 583 | AppendMenu(m, MF_ENABLED, IDM_RESET, "Rese&t Terminal"); |
| 584 | AppendMenu(m, MF_SEPARATOR, 0, 0); |
| 585 | AppendMenu(m, (cfg.resize_action == RESIZE_DISABLED) ? |
| 586 | MF_GRAYED : MF_ENABLED, IDM_FULLSCREEN, "&Full Screen"); |
| 587 | AppendMenu(m, MF_SEPARATOR, 0, 0); |
| 588 | AppendMenu(m, MF_ENABLED, IDM_ABOUT, "&About PuTTY"); |
| 589 | } |
| 590 | |
| 591 | /* |
| 592 | * Finally show the window! |
| 593 | */ |
| 594 | ShowWindow(hwnd, show); |
| 595 | SetForegroundWindow(hwnd); |
| 596 | |
| 597 | /* |
| 598 | * Open the initial log file if there is one. |
| 599 | */ |
| 600 | logfopen(); |
| 601 | |
| 602 | /* |
| 603 | * Set the palette up. |
| 604 | */ |
| 605 | pal = NULL; |
| 606 | logpal = NULL; |
| 607 | init_palette(); |
| 608 | |
| 609 | has_focus = (GetForegroundWindow() == hwnd); |
| 610 | UpdateWindow(hwnd); |
| 611 | |
| 612 | if (GetMessage(&msg, NULL, 0, 0) == 1) { |
| 613 | int timer_id = 0, long_timer = 0; |
| 614 | |
| 615 | while (msg.message != WM_QUIT) { |
| 616 | /* Sometimes DispatchMessage calls routines that use their own |
| 617 | * GetMessage loop, setup this timer so we get some control back. |
| 618 | * |
| 619 | * Also call term_update() from the timer so that if the host |
| 620 | * is sending data flat out we still do redraws. |
| 621 | */ |
| 622 | if (timer_id && long_timer) { |
| 623 | KillTimer(hwnd, timer_id); |
| 624 | long_timer = timer_id = 0; |
| 625 | } |
| 626 | if (!timer_id) |
| 627 | timer_id = SetTimer(hwnd, 1, 20, NULL); |
| 628 | if (!(IsWindow(logbox) && IsDialogMessage(logbox, &msg))) |
| 629 | DispatchMessage(&msg); |
| 630 | |
| 631 | /* Make sure we blink everything that needs it. */ |
| 632 | term_blink(0); |
| 633 | |
| 634 | /* Send the paste buffer if there's anything to send */ |
| 635 | term_paste(); |
| 636 | |
| 637 | /* If there's nothing new in the queue then we can do everything |
| 638 | * we've delayed, reading the socket, writing, and repainting |
| 639 | * the window. |
| 640 | */ |
| 641 | if (PeekMessage(&msg, NULL, 0, 0, PM_REMOVE)) |
| 642 | continue; |
| 643 | |
| 644 | if (pending_netevent) { |
| 645 | enact_pending_netevent(); |
| 646 | |
| 647 | /* Force the cursor blink on */ |
| 648 | term_blink(1); |
| 649 | |
| 650 | if (PeekMessage(&msg, NULL, 0, 0, PM_REMOVE)) |
| 651 | continue; |
| 652 | } |
| 653 | |
| 654 | /* Okay there is now nothing to do so we make sure the screen is |
| 655 | * completely up to date then tell windows to call us in a little |
| 656 | * while. |
| 657 | */ |
| 658 | if (timer_id) { |
| 659 | KillTimer(hwnd, timer_id); |
| 660 | timer_id = 0; |
| 661 | } |
| 662 | HideCaret(hwnd); |
| 663 | term_out(); |
| 664 | term_update(); |
| 665 | ShowCaret(hwnd); |
| 666 | |
| 667 | flash_window(1); /* maintain */ |
| 668 | |
| 669 | if (in_vbell) |
| 670 | /* Hmm, term_update didn't want to do an update too soon ... */ |
| 671 | timer_id = SetTimer(hwnd, 1, 50, NULL); |
| 672 | else if (!has_focus) |
| 673 | timer_id = SetTimer(hwnd, 1, 500, NULL); |
| 674 | else |
| 675 | timer_id = SetTimer(hwnd, 1, 100, NULL); |
| 676 | long_timer = 1; |
| 677 | |
| 678 | /* There's no point rescanning everything in the message queue |
| 679 | * so we do an apparently unnecessary wait here |
| 680 | */ |
| 681 | WaitMessage(); |
| 682 | if (GetMessage(&msg, NULL, 0, 0) != 1) |
| 683 | break; |
| 684 | } |
| 685 | } |
| 686 | |
| 687 | /* |
| 688 | * Clean up. |
| 689 | */ |
| 690 | deinit_fonts(); |
| 691 | sfree(logpal); |
| 692 | if (pal) |
| 693 | DeleteObject(pal); |
| 694 | WSACleanup(); |
| 695 | |
| 696 | if (cfg.protocol == PROT_SSH) { |
| 697 | random_save_seed(); |
| 698 | #ifdef MSCRYPTOAPI |
| 699 | crypto_wrapup(); |
| 700 | #endif |
| 701 | } |
| 702 | |
| 703 | return msg.wParam; |
| 704 | } |
| 705 | |
| 706 | /* |
| 707 | * Set up, or shut down, an AsyncSelect. Called from winnet.c. |
| 708 | */ |
| 709 | char *do_select(SOCKET skt, int startup) |
| 710 | { |
| 711 | int msg, events; |
| 712 | if (startup) { |
| 713 | msg = WM_NETEVENT; |
| 714 | events = (FD_CONNECT | FD_READ | FD_WRITE | |
| 715 | FD_OOB | FD_CLOSE | FD_ACCEPT); |
| 716 | } else { |
| 717 | msg = events = 0; |
| 718 | } |
| 719 | if (!hwnd) |
| 720 | return "do_select(): internal error (hwnd==NULL)"; |
| 721 | if (WSAAsyncSelect(skt, hwnd, msg, events) == SOCKET_ERROR) { |
| 722 | switch (WSAGetLastError()) { |
| 723 | case WSAENETDOWN: |
| 724 | return "Network is down"; |
| 725 | default: |
| 726 | return "WSAAsyncSelect(): unknown error"; |
| 727 | } |
| 728 | } |
| 729 | return NULL; |
| 730 | } |
| 731 | |
| 732 | /* |
| 733 | * set or clear the "raw mouse message" mode |
| 734 | */ |
| 735 | void set_raw_mouse_mode(int activate) |
| 736 | { |
| 737 | send_raw_mouse = activate; |
| 738 | SetCursor(LoadCursor(NULL, activate ? IDC_ARROW : IDC_IBEAM)); |
| 739 | } |
| 740 | |
| 741 | /* |
| 742 | * Print a message box and close the connection. |
| 743 | */ |
| 744 | void connection_fatal(char *fmt, ...) |
| 745 | { |
| 746 | va_list ap; |
| 747 | char stuff[200]; |
| 748 | |
| 749 | va_start(ap, fmt); |
| 750 | vsprintf(stuff, fmt, ap); |
| 751 | va_end(ap); |
| 752 | MessageBox(hwnd, stuff, "PuTTY Fatal Error", MB_ICONERROR | MB_OK); |
| 753 | if (cfg.close_on_exit == COE_ALWAYS) |
| 754 | PostQuitMessage(1); |
| 755 | else { |
| 756 | session_closed = TRUE; |
| 757 | SetWindowText(hwnd, "PuTTY (inactive)"); |
| 758 | } |
| 759 | } |
| 760 | |
| 761 | /* |
| 762 | * Actually do the job requested by a WM_NETEVENT |
| 763 | */ |
| 764 | static void enact_pending_netevent(void) |
| 765 | { |
| 766 | static int reentering = 0; |
| 767 | extern int select_result(WPARAM, LPARAM); |
| 768 | int ret; |
| 769 | |
| 770 | if (reentering) |
| 771 | return; /* don't unpend the pending */ |
| 772 | |
| 773 | pending_netevent = FALSE; |
| 774 | |
| 775 | reentering = 1; |
| 776 | ret = select_result(pend_netevent_wParam, pend_netevent_lParam); |
| 777 | reentering = 0; |
| 778 | |
| 779 | if (ret == 0 && !session_closed) { |
| 780 | /* Abnormal exits will already have set session_closed and taken |
| 781 | * appropriate action. */ |
| 782 | if (cfg.close_on_exit == COE_ALWAYS || |
| 783 | cfg.close_on_exit == COE_NORMAL) PostQuitMessage(0); |
| 784 | else { |
| 785 | session_closed = TRUE; |
| 786 | SetWindowText(hwnd, "PuTTY (inactive)"); |
| 787 | MessageBox(hwnd, "Connection closed by remote host", |
| 788 | "PuTTY", MB_OK | MB_ICONINFORMATION); |
| 789 | } |
| 790 | } |
| 791 | } |
| 792 | |
| 793 | /* |
| 794 | * Copy the colour palette from the configuration data into defpal. |
| 795 | * This is non-trivial because the colour indices are different. |
| 796 | */ |
| 797 | static void cfgtopalette(void) |
| 798 | { |
| 799 | int i; |
| 800 | static const int ww[] = { |
| 801 | 6, 7, 8, 9, 10, 11, 12, 13, |
| 802 | 14, 15, 16, 17, 18, 19, 20, 21, |
| 803 | 0, 1, 2, 3, 4, 4, 5, 5 |
| 804 | }; |
| 805 | |
| 806 | for (i = 0; i < 24; i++) { |
| 807 | int w = ww[i]; |
| 808 | defpal[i].rgbtRed = cfg.colours[w][0]; |
| 809 | defpal[i].rgbtGreen = cfg.colours[w][1]; |
| 810 | defpal[i].rgbtBlue = cfg.colours[w][2]; |
| 811 | } |
| 812 | } |
| 813 | |
| 814 | /* |
| 815 | * Set up the colour palette. |
| 816 | */ |
| 817 | static void init_palette(void) |
| 818 | { |
| 819 | int i; |
| 820 | HDC hdc = GetDC(hwnd); |
| 821 | if (hdc) { |
| 822 | if (cfg.try_palette && GetDeviceCaps(hdc, RASTERCAPS) & RC_PALETTE) { |
| 823 | logpal = smalloc(sizeof(*logpal) |
| 824 | - sizeof(logpal->palPalEntry) |
| 825 | + NCOLOURS * sizeof(PALETTEENTRY)); |
| 826 | logpal->palVersion = 0x300; |
| 827 | logpal->palNumEntries = NCOLOURS; |
| 828 | for (i = 0; i < NCOLOURS; i++) { |
| 829 | logpal->palPalEntry[i].peRed = defpal[i].rgbtRed; |
| 830 | logpal->palPalEntry[i].peGreen = defpal[i].rgbtGreen; |
| 831 | logpal->palPalEntry[i].peBlue = defpal[i].rgbtBlue; |
| 832 | logpal->palPalEntry[i].peFlags = PC_NOCOLLAPSE; |
| 833 | } |
| 834 | pal = CreatePalette(logpal); |
| 835 | if (pal) { |
| 836 | SelectPalette(hdc, pal, FALSE); |
| 837 | RealizePalette(hdc); |
| 838 | SelectPalette(hdc, GetStockObject(DEFAULT_PALETTE), FALSE); |
| 839 | } |
| 840 | } |
| 841 | ReleaseDC(hwnd, hdc); |
| 842 | } |
| 843 | if (pal) |
| 844 | for (i = 0; i < NCOLOURS; i++) |
| 845 | colours[i] = PALETTERGB(defpal[i].rgbtRed, |
| 846 | defpal[i].rgbtGreen, |
| 847 | defpal[i].rgbtBlue); |
| 848 | else |
| 849 | for (i = 0; i < NCOLOURS; i++) |
| 850 | colours[i] = RGB(defpal[i].rgbtRed, |
| 851 | defpal[i].rgbtGreen, defpal[i].rgbtBlue); |
| 852 | } |
| 853 | |
| 854 | /* |
| 855 | * Initialise all the fonts we will need initially. There may be as many as |
| 856 | * three or as few as one. The other (poentially) twentyone fonts are done |
| 857 | * if/when they are needed. |
| 858 | * |
| 859 | * We also: |
| 860 | * |
| 861 | * - check the font width and height, correcting our guesses if |
| 862 | * necessary. |
| 863 | * |
| 864 | * - verify that the bold font is the same width as the ordinary |
| 865 | * one, and engage shadow bolding if not. |
| 866 | * |
| 867 | * - verify that the underlined font is the same width as the |
| 868 | * ordinary one (manual underlining by means of line drawing can |
| 869 | * be done in a pinch). |
| 870 | */ |
| 871 | static void init_fonts(int pick_width, int pick_height) |
| 872 | { |
| 873 | TEXTMETRIC tm; |
| 874 | CPINFO cpinfo; |
| 875 | int fontsize[3]; |
| 876 | int i; |
| 877 | HDC hdc; |
| 878 | int fw_dontcare, fw_bold; |
| 879 | |
| 880 | for (i = 0; i < FONT_MAXNO; i++) |
| 881 | fonts[i] = NULL; |
| 882 | |
| 883 | bold_mode = cfg.bold_colour ? BOLD_COLOURS : BOLD_FONT; |
| 884 | und_mode = UND_FONT; |
| 885 | |
| 886 | if (cfg.fontisbold) { |
| 887 | fw_dontcare = FW_BOLD; |
| 888 | fw_bold = FW_HEAVY; |
| 889 | } else { |
| 890 | fw_dontcare = FW_DONTCARE; |
| 891 | fw_bold = FW_BOLD; |
| 892 | } |
| 893 | |
| 894 | hdc = GetDC(hwnd); |
| 895 | |
| 896 | if (pick_height) |
| 897 | font_height = pick_height; |
| 898 | else { |
| 899 | font_height = cfg.fontheight; |
| 900 | if (font_height > 0) { |
| 901 | font_height = |
| 902 | -MulDiv(font_height, GetDeviceCaps(hdc, LOGPIXELSY), 72); |
| 903 | } |
| 904 | } |
| 905 | font_width = pick_width; |
| 906 | |
| 907 | #define f(i,c,w,u) \ |
| 908 | fonts[i] = CreateFont (font_height, font_width, 0, 0, w, FALSE, u, FALSE, \ |
| 909 | c, OUT_DEFAULT_PRECIS, \ |
| 910 | CLIP_DEFAULT_PRECIS, DEFAULT_QUALITY, \ |
| 911 | FIXED_PITCH | FF_DONTCARE, cfg.font) |
| 912 | |
| 913 | f(FONT_NORMAL, cfg.fontcharset, fw_dontcare, FALSE); |
| 914 | |
| 915 | lfont.lfHeight = font_height; |
| 916 | lfont.lfWidth = font_width; |
| 917 | lfont.lfEscapement = 0; |
| 918 | lfont.lfOrientation = 0; |
| 919 | lfont.lfWeight = fw_dontcare; |
| 920 | lfont.lfItalic = FALSE; |
| 921 | lfont.lfUnderline = FALSE; |
| 922 | lfont.lfStrikeOut = FALSE; |
| 923 | lfont.lfCharSet = cfg.fontcharset; |
| 924 | lfont.lfOutPrecision = OUT_DEFAULT_PRECIS; |
| 925 | lfont.lfClipPrecision = CLIP_DEFAULT_PRECIS; |
| 926 | lfont.lfQuality = DEFAULT_QUALITY; |
| 927 | lfont.lfPitchAndFamily = FIXED_PITCH | FF_DONTCARE; |
| 928 | strncpy(lfont.lfFaceName, cfg.font, LF_FACESIZE); |
| 929 | |
| 930 | SelectObject(hdc, fonts[FONT_NORMAL]); |
| 931 | GetTextMetrics(hdc, &tm); |
| 932 | |
| 933 | if (pick_width == 0 || pick_height == 0) { |
| 934 | font_height = tm.tmHeight; |
| 935 | font_width = tm.tmAveCharWidth; |
| 936 | } |
| 937 | font_dualwidth = (tm.tmAveCharWidth != tm.tmMaxCharWidth); |
| 938 | |
| 939 | #ifdef RDB_DEBUG_PATCH |
| 940 | debug(23, "Primary font H=%d, AW=%d, MW=%d", |
| 941 | tm.tmHeight, tm.tmAveCharWidth, tm.tmMaxCharWidth); |
| 942 | #endif |
| 943 | |
| 944 | { |
| 945 | CHARSETINFO info; |
| 946 | DWORD cset = tm.tmCharSet; |
| 947 | memset(&info, 0xFF, sizeof(info)); |
| 948 | |
| 949 | /* !!! Yes the next line is right */ |
| 950 | if (cset == OEM_CHARSET) |
| 951 | font_codepage = GetOEMCP(); |
| 952 | else |
| 953 | if (TranslateCharsetInfo |
| 954 | ((DWORD *) cset, &info, TCI_SRCCHARSET)) font_codepage = |
| 955 | info.ciACP; |
| 956 | else |
| 957 | font_codepage = -1; |
| 958 | |
| 959 | GetCPInfo(font_codepage, &cpinfo); |
| 960 | dbcs_screenfont = (cpinfo.MaxCharSize > 1); |
| 961 | } |
| 962 | |
| 963 | f(FONT_UNDERLINE, cfg.fontcharset, fw_dontcare, TRUE); |
| 964 | |
| 965 | /* |
| 966 | * Some fonts, e.g. 9-pt Courier, draw their underlines |
| 967 | * outside their character cell. We successfully prevent |
| 968 | * screen corruption by clipping the text output, but then |
| 969 | * we lose the underline completely. Here we try to work |
| 970 | * out whether this is such a font, and if it is, we set a |
| 971 | * flag that causes underlines to be drawn by hand. |
| 972 | * |
| 973 | * Having tried other more sophisticated approaches (such |
| 974 | * as examining the TEXTMETRIC structure or requesting the |
| 975 | * height of a string), I think we'll do this the brute |
| 976 | * force way: we create a small bitmap, draw an underlined |
| 977 | * space on it, and test to see whether any pixels are |
| 978 | * foreground-coloured. (Since we expect the underline to |
| 979 | * go all the way across the character cell, we only search |
| 980 | * down a single column of the bitmap, half way across.) |
| 981 | */ |
| 982 | { |
| 983 | HDC und_dc; |
| 984 | HBITMAP und_bm, und_oldbm; |
| 985 | int i, gotit; |
| 986 | COLORREF c; |
| 987 | |
| 988 | und_dc = CreateCompatibleDC(hdc); |
| 989 | und_bm = CreateCompatibleBitmap(hdc, font_width, font_height); |
| 990 | und_oldbm = SelectObject(und_dc, und_bm); |
| 991 | SelectObject(und_dc, fonts[FONT_UNDERLINE]); |
| 992 | SetTextAlign(und_dc, TA_TOP | TA_LEFT | TA_NOUPDATECP); |
| 993 | SetTextColor(und_dc, RGB(255, 255, 255)); |
| 994 | SetBkColor(und_dc, RGB(0, 0, 0)); |
| 995 | SetBkMode(und_dc, OPAQUE); |
| 996 | ExtTextOut(und_dc, 0, 0, ETO_OPAQUE, NULL, " ", 1, NULL); |
| 997 | gotit = FALSE; |
| 998 | for (i = 0; i < font_height; i++) { |
| 999 | c = GetPixel(und_dc, font_width / 2, i); |
| 1000 | if (c != RGB(0, 0, 0)) |
| 1001 | gotit = TRUE; |
| 1002 | } |
| 1003 | SelectObject(und_dc, und_oldbm); |
| 1004 | DeleteObject(und_bm); |
| 1005 | DeleteDC(und_dc); |
| 1006 | if (!gotit) { |
| 1007 | und_mode = UND_LINE; |
| 1008 | DeleteObject(fonts[FONT_UNDERLINE]); |
| 1009 | fonts[FONT_UNDERLINE] = 0; |
| 1010 | } |
| 1011 | } |
| 1012 | |
| 1013 | if (bold_mode == BOLD_FONT) { |
| 1014 | f(FONT_BOLD, cfg.fontcharset, fw_bold, FALSE); |
| 1015 | } |
| 1016 | #undef f |
| 1017 | |
| 1018 | descent = tm.tmAscent + 1; |
| 1019 | if (descent >= font_height) |
| 1020 | descent = font_height - 1; |
| 1021 | |
| 1022 | for (i = 0; i < 3; i++) { |
| 1023 | if (fonts[i]) { |
| 1024 | if (SelectObject(hdc, fonts[i]) && GetTextMetrics(hdc, &tm)) |
| 1025 | fontsize[i] = tm.tmAveCharWidth + 256 * tm.tmHeight; |
| 1026 | else |
| 1027 | fontsize[i] = -i; |
| 1028 | } else |
| 1029 | fontsize[i] = -i; |
| 1030 | } |
| 1031 | |
| 1032 | ReleaseDC(hwnd, hdc); |
| 1033 | |
| 1034 | if (fontsize[FONT_UNDERLINE] != fontsize[FONT_NORMAL]) { |
| 1035 | und_mode = UND_LINE; |
| 1036 | DeleteObject(fonts[FONT_UNDERLINE]); |
| 1037 | fonts[FONT_UNDERLINE] = 0; |
| 1038 | } |
| 1039 | |
| 1040 | if (bold_mode == BOLD_FONT && |
| 1041 | fontsize[FONT_BOLD] != fontsize[FONT_NORMAL]) { |
| 1042 | bold_mode = BOLD_SHADOW; |
| 1043 | DeleteObject(fonts[FONT_BOLD]); |
| 1044 | fonts[FONT_BOLD] = 0; |
| 1045 | } |
| 1046 | fontflag[0] = fontflag[1] = fontflag[2] = 1; |
| 1047 | |
| 1048 | init_ucs_tables(); |
| 1049 | } |
| 1050 | |
| 1051 | static void another_font(int fontno) |
| 1052 | { |
| 1053 | int basefont; |
| 1054 | int fw_dontcare, fw_bold; |
| 1055 | int c, u, w, x; |
| 1056 | char *s; |
| 1057 | |
| 1058 | if (fontno < 0 || fontno >= FONT_MAXNO || fontflag[fontno]) |
| 1059 | return; |
| 1060 | |
| 1061 | basefont = (fontno & ~(FONT_BOLDUND)); |
| 1062 | if (basefont != fontno && !fontflag[basefont]) |
| 1063 | another_font(basefont); |
| 1064 | |
| 1065 | if (cfg.fontisbold) { |
| 1066 | fw_dontcare = FW_BOLD; |
| 1067 | fw_bold = FW_HEAVY; |
| 1068 | } else { |
| 1069 | fw_dontcare = FW_DONTCARE; |
| 1070 | fw_bold = FW_BOLD; |
| 1071 | } |
| 1072 | |
| 1073 | c = cfg.fontcharset; |
| 1074 | w = fw_dontcare; |
| 1075 | u = FALSE; |
| 1076 | s = cfg.font; |
| 1077 | x = font_width; |
| 1078 | |
| 1079 | if (fontno & FONT_WIDE) |
| 1080 | x *= 2; |
| 1081 | if (fontno & FONT_NARROW) |
| 1082 | x = (x+1)/2; |
| 1083 | if (fontno & FONT_OEM) |
| 1084 | c = OEM_CHARSET; |
| 1085 | if (fontno & FONT_BOLD) |
| 1086 | w = fw_bold; |
| 1087 | if (fontno & FONT_UNDERLINE) |
| 1088 | u = TRUE; |
| 1089 | |
| 1090 | fonts[fontno] = |
| 1091 | CreateFont(font_height * (1 + !!(fontno & FONT_HIGH)), x, 0, 0, w, |
| 1092 | FALSE, u, FALSE, c, OUT_DEFAULT_PRECIS, |
| 1093 | CLIP_DEFAULT_PRECIS, DEFAULT_QUALITY, |
| 1094 | FIXED_PITCH | FF_DONTCARE, s); |
| 1095 | |
| 1096 | fontflag[fontno] = 1; |
| 1097 | } |
| 1098 | |
| 1099 | static void deinit_fonts(void) |
| 1100 | { |
| 1101 | int i; |
| 1102 | for (i = 0; i < FONT_MAXNO; i++) { |
| 1103 | if (fonts[i]) |
| 1104 | DeleteObject(fonts[i]); |
| 1105 | fonts[i] = 0; |
| 1106 | fontflag[i] = 0; |
| 1107 | } |
| 1108 | } |
| 1109 | |
| 1110 | void request_resize(int w, int h) |
| 1111 | { |
| 1112 | int width, height; |
| 1113 | |
| 1114 | /* If the window is maximized supress resizing attempts */ |
| 1115 | if (IsZoomed(hwnd)) { |
| 1116 | if (cfg.resize_action != RESIZE_FONT) |
| 1117 | return; |
| 1118 | } |
| 1119 | |
| 1120 | if (cfg.resize_action == RESIZE_DISABLED) return; |
| 1121 | if (h == rows && w == cols) return; |
| 1122 | |
| 1123 | /* Sanity checks ... */ |
| 1124 | { |
| 1125 | static int first_time = 1; |
| 1126 | static RECT ss; |
| 1127 | |
| 1128 | switch (first_time) { |
| 1129 | case 1: |
| 1130 | /* Get the size of the screen */ |
| 1131 | if (GetClientRect(GetDesktopWindow(), &ss)) |
| 1132 | /* first_time = 0 */ ; |
| 1133 | else { |
| 1134 | first_time = 2; |
| 1135 | break; |
| 1136 | } |
| 1137 | case 0: |
| 1138 | /* Make sure the values are sane */ |
| 1139 | width = (ss.right - ss.left - extra_width) / 4; |
| 1140 | height = (ss.bottom - ss.top - extra_height) / 6; |
| 1141 | |
| 1142 | if (w > width || h > height) |
| 1143 | return; |
| 1144 | if (w < 15) |
| 1145 | w = 15; |
| 1146 | if (h < 1) |
| 1147 | h = 1; |
| 1148 | } |
| 1149 | } |
| 1150 | |
| 1151 | term_size(h, w, cfg.savelines); |
| 1152 | |
| 1153 | if (cfg.resize_action != RESIZE_FONT) { |
| 1154 | width = extra_width + font_width * w; |
| 1155 | height = extra_height + font_height * h; |
| 1156 | |
| 1157 | SetWindowPos(hwnd, NULL, 0, 0, width, height, |
| 1158 | SWP_NOACTIVATE | SWP_NOCOPYBITS | |
| 1159 | SWP_NOMOVE | SWP_NOZORDER); |
| 1160 | } else |
| 1161 | reset_window(0); |
| 1162 | |
| 1163 | InvalidateRect(hwnd, NULL, TRUE); |
| 1164 | } |
| 1165 | |
| 1166 | static void reset_window(int reinit) { |
| 1167 | /* |
| 1168 | * This function decides how to resize or redraw when the |
| 1169 | * user changes something. |
| 1170 | * |
| 1171 | * This function doesn't like to change the terminal size but if the |
| 1172 | * font size is locked that may be it's only soluion. |
| 1173 | */ |
| 1174 | int win_width, win_height; |
| 1175 | RECT cr, wr; |
| 1176 | |
| 1177 | #ifdef RDB_DEBUG_PATCH |
| 1178 | debug((27, "reset_window()")); |
| 1179 | #endif |
| 1180 | |
| 1181 | /* Current window sizes ... */ |
| 1182 | GetWindowRect(hwnd, &wr); |
| 1183 | GetClientRect(hwnd, &cr); |
| 1184 | |
| 1185 | win_width = cr.right - cr.left; |
| 1186 | win_height = cr.bottom - cr.top; |
| 1187 | |
| 1188 | /* Are we being forced to reload the fonts ? */ |
| 1189 | if (reinit>1) { |
| 1190 | #ifdef RDB_DEBUG_PATCH |
| 1191 | debug((27, "reset_window() -- Forced deinit")); |
| 1192 | #endif |
| 1193 | deinit_fonts(); |
| 1194 | init_fonts(0,0); |
| 1195 | } |
| 1196 | |
| 1197 | /* Oh, looks like we're minimised */ |
| 1198 | if (win_width == 0 || win_height == 0) |
| 1199 | return; |
| 1200 | |
| 1201 | /* Is the window out of position ? */ |
| 1202 | if ( !reinit && |
| 1203 | (offset_width != (win_width-font_width*cols)/2 || |
| 1204 | offset_height != (win_height-font_height*rows)/2) ){ |
| 1205 | offset_width = (win_width-font_width*cols)/2; |
| 1206 | offset_height = (win_height-font_height*rows)/2; |
| 1207 | InvalidateRect(hwnd, NULL, TRUE); |
| 1208 | #ifdef RDB_DEBUG_PATCH |
| 1209 | debug((27, "reset_window() -> Reposition terminal")); |
| 1210 | #endif |
| 1211 | } |
| 1212 | |
| 1213 | if (IsZoomed(hwnd)) { |
| 1214 | /* We're fullscreen, this means we must not change the size of |
| 1215 | * the window so it's the font size or the terminal itself. |
| 1216 | */ |
| 1217 | |
| 1218 | extra_width = wr.right - wr.left - cr.right + cr.left; |
| 1219 | extra_height = wr.bottom - wr.top - cr.bottom + cr.top; |
| 1220 | |
| 1221 | if (cfg.resize_action == RESIZE_FONT) { |
| 1222 | if ( font_width != win_width/cols || |
| 1223 | font_height != win_height/rows) { |
| 1224 | deinit_fonts(); |
| 1225 | init_fonts(win_width/cols, win_height/rows); |
| 1226 | offset_width = (win_width-font_width*cols)/2; |
| 1227 | offset_height = (win_height-font_height*rows)/2; |
| 1228 | InvalidateRect(hwnd, NULL, TRUE); |
| 1229 | #ifdef RDB_DEBUG_PATCH |
| 1230 | debug((25, "reset_window() -> Z font resize to (%d, %d)", |
| 1231 | font_width, font_height)); |
| 1232 | #endif |
| 1233 | } |
| 1234 | } else { |
| 1235 | if ( font_width != win_width/cols || |
| 1236 | font_height != win_height/rows) { |
| 1237 | /* Our only choice at this point is to change the |
| 1238 | * size of the terminal; Oh well. |
| 1239 | */ |
| 1240 | term_size( win_height/font_height, win_width/font_width, |
| 1241 | cfg.savelines); |
| 1242 | offset_width = (win_width-font_width*cols)/2; |
| 1243 | offset_height = (win_height-font_height*rows)/2; |
| 1244 | InvalidateRect(hwnd, NULL, TRUE); |
| 1245 | #ifdef RDB_DEBUG_PATCH |
| 1246 | debug((27, "reset_window() -> Zoomed term_size")); |
| 1247 | #endif |
| 1248 | } |
| 1249 | } |
| 1250 | return; |
| 1251 | } |
| 1252 | |
| 1253 | /* Hmm, a force re-init means we should ignore the current window |
| 1254 | * so we resize to the default font size. |
| 1255 | */ |
| 1256 | if (reinit>0) { |
| 1257 | #ifdef RDB_DEBUG_PATCH |
| 1258 | debug((27, "reset_window() -> Forced re-init")); |
| 1259 | #endif |
| 1260 | |
| 1261 | offset_width = offset_height = cfg.window_border; |
| 1262 | extra_width = wr.right - wr.left - cr.right + cr.left + offset_width*2; |
| 1263 | extra_height = wr.bottom - wr.top - cr.bottom + cr.top +offset_height*2; |
| 1264 | |
| 1265 | if (win_width != font_width*cols + offset_width*2 || |
| 1266 | win_height != font_height*rows + offset_height*2) { |
| 1267 | |
| 1268 | /* If this is too large windows will resize it to the maximum |
| 1269 | * allowed window size, we will then be back in here and resize |
| 1270 | * the font or terminal to fit. |
| 1271 | */ |
| 1272 | SetWindowPos(hwnd, NULL, 0, 0, |
| 1273 | font_width*cols + extra_width, |
| 1274 | font_height*rows + extra_height, |
| 1275 | SWP_NOMOVE | SWP_NOZORDER); |
| 1276 | } |
| 1277 | return; |
| 1278 | } |
| 1279 | |
| 1280 | /* Okay the user doesn't want us to change the font so we try the |
| 1281 | * window. But that may be too big for the screen which forces us |
| 1282 | * to change the terminal. |
| 1283 | */ |
| 1284 | if ((cfg.resize_action != RESIZE_FONT && reinit==0) || reinit>0) { |
| 1285 | offset_width = offset_height = cfg.window_border; |
| 1286 | extra_width = wr.right - wr.left - cr.right + cr.left + offset_width*2; |
| 1287 | extra_height = wr.bottom - wr.top - cr.bottom + cr.top +offset_height*2; |
| 1288 | |
| 1289 | if (win_width != font_width*cols + offset_width*2 || |
| 1290 | win_height != font_height*rows + offset_height*2) { |
| 1291 | |
| 1292 | static RECT ss; |
| 1293 | int width, height; |
| 1294 | |
| 1295 | GetClientRect(GetDesktopWindow(), &ss); |
| 1296 | width = (ss.right - ss.left - extra_width) / font_width; |
| 1297 | height = (ss.bottom - ss.top - extra_height) / font_height; |
| 1298 | |
| 1299 | /* Grrr too big */ |
| 1300 | if ( rows > height || cols > width ) { |
| 1301 | if ( height > rows ) height = rows; |
| 1302 | if ( width > cols ) width = cols; |
| 1303 | term_size(height, width, cfg.savelines); |
| 1304 | #ifdef RDB_DEBUG_PATCH |
| 1305 | debug((27, "reset_window() -> term resize to (%d,%d)", |
| 1306 | height, width)); |
| 1307 | #endif |
| 1308 | } |
| 1309 | |
| 1310 | SetWindowPos(hwnd, NULL, 0, 0, |
| 1311 | font_width*cols + extra_width, |
| 1312 | font_height*rows + extra_height, |
| 1313 | SWP_NOMOVE | SWP_NOZORDER); |
| 1314 | |
| 1315 | InvalidateRect(hwnd, NULL, TRUE); |
| 1316 | #ifdef RDB_DEBUG_PATCH |
| 1317 | debug((27, "reset_window() -> window resize to (%d,%d)", |
| 1318 | font_width*cols + extra_width, |
| 1319 | font_height*rows + extra_height)); |
| 1320 | #endif |
| 1321 | } |
| 1322 | return; |
| 1323 | } |
| 1324 | |
| 1325 | /* We're allowed to or must change the font but do we want to ? */ |
| 1326 | |
| 1327 | if (font_width != (win_width-cfg.window_border*2)/cols || |
| 1328 | font_height != (win_height-cfg.window_border*2)/rows) { |
| 1329 | |
| 1330 | deinit_fonts(); |
| 1331 | init_fonts((win_width-cfg.window_border*2)/cols, |
| 1332 | (win_height-cfg.window_border*2)/rows); |
| 1333 | offset_width = (win_width-font_width*cols)/2; |
| 1334 | offset_height = (win_height-font_height*rows)/2; |
| 1335 | |
| 1336 | extra_width = wr.right - wr.left - cr.right + cr.left +offset_width*2; |
| 1337 | extra_height = wr.bottom - wr.top - cr.bottom + cr.top+offset_height*2; |
| 1338 | |
| 1339 | InvalidateRect(hwnd, NULL, TRUE); |
| 1340 | #ifdef RDB_DEBUG_PATCH |
| 1341 | debug((25, "reset_window() -> font resize to (%d,%d)", |
| 1342 | font_width, font_height)); |
| 1343 | #endif |
| 1344 | } |
| 1345 | } |
| 1346 | |
| 1347 | static void click(Mouse_Button b, int x, int y, int shift, int ctrl, int alt) |
| 1348 | { |
| 1349 | int thistime = GetMessageTime(); |
| 1350 | |
| 1351 | if (send_raw_mouse && !(cfg.mouse_override && shift)) { |
| 1352 | lastbtn = MBT_NOTHING; |
| 1353 | term_mouse(b, MA_CLICK, x, y, shift, ctrl, alt); |
| 1354 | return; |
| 1355 | } |
| 1356 | |
| 1357 | if (lastbtn == b && thistime - lasttime < dbltime) { |
| 1358 | lastact = (lastact == MA_CLICK ? MA_2CLK : |
| 1359 | lastact == MA_2CLK ? MA_3CLK : |
| 1360 | lastact == MA_3CLK ? MA_CLICK : MA_NOTHING); |
| 1361 | } else { |
| 1362 | lastbtn = b; |
| 1363 | lastact = MA_CLICK; |
| 1364 | } |
| 1365 | if (lastact != MA_NOTHING) |
| 1366 | term_mouse(b, lastact, x, y, shift, ctrl, alt); |
| 1367 | lasttime = thistime; |
| 1368 | } |
| 1369 | |
| 1370 | /* |
| 1371 | * Translate a raw mouse button designation (LEFT, MIDDLE, RIGHT) |
| 1372 | * into a cooked one (SELECT, EXTEND, PASTE). |
| 1373 | */ |
| 1374 | Mouse_Button translate_button(Mouse_Button button) |
| 1375 | { |
| 1376 | if (button == MBT_LEFT) |
| 1377 | return MBT_SELECT; |
| 1378 | if (button == MBT_MIDDLE) |
| 1379 | return cfg.mouse_is_xterm ? MBT_PASTE : MBT_EXTEND; |
| 1380 | if (button == MBT_RIGHT) |
| 1381 | return cfg.mouse_is_xterm ? MBT_EXTEND : MBT_PASTE; |
| 1382 | return 0; /* shouldn't happen */ |
| 1383 | } |
| 1384 | |
| 1385 | static void show_mouseptr(int show) |
| 1386 | { |
| 1387 | static int cursor_visible = 1; |
| 1388 | if (!cfg.hide_mouseptr) /* override if this feature disabled */ |
| 1389 | show = 1; |
| 1390 | if (cursor_visible && !show) |
| 1391 | ShowCursor(FALSE); |
| 1392 | else if (!cursor_visible && show) |
| 1393 | ShowCursor(TRUE); |
| 1394 | cursor_visible = show; |
| 1395 | } |
| 1396 | |
| 1397 | static int is_alt_pressed(void) |
| 1398 | { |
| 1399 | BYTE keystate[256]; |
| 1400 | int r = GetKeyboardState(keystate); |
| 1401 | if (!r) |
| 1402 | return FALSE; |
| 1403 | if (keystate[VK_MENU] & 0x80) |
| 1404 | return TRUE; |
| 1405 | if (keystate[VK_RMENU] & 0x80) |
| 1406 | return TRUE; |
| 1407 | return FALSE; |
| 1408 | } |
| 1409 | |
| 1410 | static LRESULT CALLBACK WndProc(HWND hwnd, UINT message, |
| 1411 | WPARAM wParam, LPARAM lParam) |
| 1412 | { |
| 1413 | HDC hdc; |
| 1414 | static int ignore_clip = FALSE; |
| 1415 | static int resizing = FALSE; |
| 1416 | static int need_backend_resize = FALSE; |
| 1417 | |
| 1418 | switch (message) { |
| 1419 | case WM_TIMER: |
| 1420 | if (pending_netevent) |
| 1421 | enact_pending_netevent(); |
| 1422 | term_out(); |
| 1423 | noise_regular(); |
| 1424 | HideCaret(hwnd); |
| 1425 | term_update(); |
| 1426 | ShowCaret(hwnd); |
| 1427 | if (cfg.ping_interval > 0) { |
| 1428 | time_t now; |
| 1429 | time(&now); |
| 1430 | if (now - last_movement > cfg.ping_interval) { |
| 1431 | back->special(TS_PING); |
| 1432 | last_movement = now; |
| 1433 | } |
| 1434 | } |
| 1435 | net_pending_errors(); |
| 1436 | return 0; |
| 1437 | case WM_CREATE: |
| 1438 | break; |
| 1439 | case WM_CLOSE: |
| 1440 | show_mouseptr(1); |
| 1441 | if (!cfg.warn_on_close || session_closed || |
| 1442 | MessageBox(hwnd, |
| 1443 | "Are you sure you want to close this session?", |
| 1444 | "PuTTY Exit Confirmation", |
| 1445 | MB_ICONWARNING | MB_OKCANCEL) == IDOK) |
| 1446 | DestroyWindow(hwnd); |
| 1447 | return 0; |
| 1448 | case WM_DESTROY: |
| 1449 | show_mouseptr(1); |
| 1450 | PostQuitMessage(0); |
| 1451 | return 0; |
| 1452 | case WM_SYSCOMMAND: |
| 1453 | switch (wParam & ~0xF) { /* low 4 bits reserved to Windows */ |
| 1454 | case IDM_SHOWLOG: |
| 1455 | showeventlog(hwnd); |
| 1456 | break; |
| 1457 | case IDM_NEWSESS: |
| 1458 | case IDM_DUPSESS: |
| 1459 | case IDM_SAVEDSESS: |
| 1460 | { |
| 1461 | char b[2048]; |
| 1462 | char c[30], *cl; |
| 1463 | int freecl = FALSE; |
| 1464 | STARTUPINFO si; |
| 1465 | PROCESS_INFORMATION pi; |
| 1466 | HANDLE filemap = NULL; |
| 1467 | |
| 1468 | if (wParam == IDM_DUPSESS) { |
| 1469 | /* |
| 1470 | * Allocate a file-mapping memory chunk for the |
| 1471 | * config structure. |
| 1472 | */ |
| 1473 | SECURITY_ATTRIBUTES sa; |
| 1474 | Config *p; |
| 1475 | |
| 1476 | sa.nLength = sizeof(sa); |
| 1477 | sa.lpSecurityDescriptor = NULL; |
| 1478 | sa.bInheritHandle = TRUE; |
| 1479 | filemap = CreateFileMapping((HANDLE) 0xFFFFFFFF, |
| 1480 | &sa, |
| 1481 | PAGE_READWRITE, |
| 1482 | 0, sizeof(Config), NULL); |
| 1483 | if (filemap) { |
| 1484 | p = (Config *) MapViewOfFile(filemap, |
| 1485 | FILE_MAP_WRITE, |
| 1486 | 0, 0, sizeof(Config)); |
| 1487 | if (p) { |
| 1488 | *p = cfg; /* structure copy */ |
| 1489 | UnmapViewOfFile(p); |
| 1490 | } |
| 1491 | } |
| 1492 | sprintf(c, "putty &%p", filemap); |
| 1493 | cl = c; |
| 1494 | } else if (wParam == IDM_SAVEDSESS) { |
| 1495 | char *session = |
| 1496 | sessions[(lParam - IDM_SAVED_MIN) / 16]; |
| 1497 | cl = smalloc(16 + strlen(session)); /* 8, but play safe */ |
| 1498 | if (!cl) |
| 1499 | cl = NULL; /* not a very important failure mode */ |
| 1500 | else { |
| 1501 | sprintf(cl, "putty @%s", session); |
| 1502 | freecl = TRUE; |
| 1503 | } |
| 1504 | } else |
| 1505 | cl = NULL; |
| 1506 | |
| 1507 | GetModuleFileName(NULL, b, sizeof(b) - 1); |
| 1508 | si.cb = sizeof(si); |
| 1509 | si.lpReserved = NULL; |
| 1510 | si.lpDesktop = NULL; |
| 1511 | si.lpTitle = NULL; |
| 1512 | si.dwFlags = 0; |
| 1513 | si.cbReserved2 = 0; |
| 1514 | si.lpReserved2 = NULL; |
| 1515 | CreateProcess(b, cl, NULL, NULL, TRUE, |
| 1516 | NORMAL_PRIORITY_CLASS, NULL, NULL, &si, &pi); |
| 1517 | |
| 1518 | if (filemap) |
| 1519 | CloseHandle(filemap); |
| 1520 | if (freecl) |
| 1521 | sfree(cl); |
| 1522 | } |
| 1523 | break; |
| 1524 | case IDM_RECONF: |
| 1525 | { |
| 1526 | Config prev_cfg; |
| 1527 | int init_lvl = 1; |
| 1528 | |
| 1529 | GetWindowText(hwnd, cfg.wintitle, sizeof(cfg.wintitle)); |
| 1530 | prev_cfg = cfg; |
| 1531 | |
| 1532 | if (!do_reconfig(hwnd)) |
| 1533 | break; |
| 1534 | |
| 1535 | { |
| 1536 | /* Disable full-screen if resizing forbidden */ |
| 1537 | HMENU m = GetSystemMenu (hwnd, FALSE); |
| 1538 | EnableMenuItem(m, IDM_FULLSCREEN, MF_BYCOMMAND | |
| 1539 | (cfg.resize_action == RESIZE_DISABLED) |
| 1540 | ? MF_GRAYED : MF_ENABLED); |
| 1541 | /* Gracefully unzoom if necessary */ |
| 1542 | if (full_screen && |
| 1543 | (cfg.resize_action == RESIZE_DISABLED)) { |
| 1544 | flip_full_screen(); |
| 1545 | } |
| 1546 | } |
| 1547 | |
| 1548 | if (strcmp(prev_cfg.logfilename, cfg.logfilename) || |
| 1549 | prev_cfg.logtype != cfg.logtype) { |
| 1550 | logfclose(); /* reset logging */ |
| 1551 | logfopen(); |
| 1552 | } |
| 1553 | |
| 1554 | sfree(logpal); |
| 1555 | /* |
| 1556 | * Flush the line discipline's edit buffer in the |
| 1557 | * case where local editing has just been disabled. |
| 1558 | */ |
| 1559 | ldisc_send(NULL, 0, 0); |
| 1560 | if (pal) |
| 1561 | DeleteObject(pal); |
| 1562 | logpal = NULL; |
| 1563 | pal = NULL; |
| 1564 | cfgtopalette(); |
| 1565 | init_palette(); |
| 1566 | |
| 1567 | /* Screen size changed ? */ |
| 1568 | if (cfg.height != prev_cfg.height || |
| 1569 | cfg.width != prev_cfg.width || |
| 1570 | cfg.savelines != prev_cfg.savelines || |
| 1571 | cfg.resize_action != RESIZE_TERM) |
| 1572 | term_size(cfg.height, cfg.width, cfg.savelines); |
| 1573 | |
| 1574 | /* Enable or disable the scroll bar, etc */ |
| 1575 | { |
| 1576 | LONG nflg, flag = GetWindowLong(hwnd, GWL_STYLE); |
| 1577 | LONG nexflag, exflag = |
| 1578 | GetWindowLong(hwnd, GWL_EXSTYLE); |
| 1579 | |
| 1580 | nexflag = exflag; |
| 1581 | if (cfg.alwaysontop != prev_cfg.alwaysontop) { |
| 1582 | if (cfg.alwaysontop) { |
| 1583 | nexflag |= WS_EX_TOPMOST; |
| 1584 | SetWindowPos(hwnd, HWND_TOPMOST, 0, 0, 0, 0, |
| 1585 | SWP_NOMOVE | SWP_NOSIZE); |
| 1586 | } else { |
| 1587 | nexflag &= ~(WS_EX_TOPMOST); |
| 1588 | SetWindowPos(hwnd, HWND_NOTOPMOST, 0, 0, 0, 0, |
| 1589 | SWP_NOMOVE | SWP_NOSIZE); |
| 1590 | } |
| 1591 | } |
| 1592 | if (cfg.sunken_edge) |
| 1593 | nexflag |= WS_EX_CLIENTEDGE; |
| 1594 | else |
| 1595 | nexflag &= ~(WS_EX_CLIENTEDGE); |
| 1596 | |
| 1597 | nflg = flag; |
| 1598 | if (full_screen ? |
| 1599 | cfg.scrollbar_in_fullscreen : cfg.scrollbar) |
| 1600 | nflg |= WS_VSCROLL; |
| 1601 | else |
| 1602 | nflg &= ~WS_VSCROLL; |
| 1603 | if (cfg.resize_action == RESIZE_DISABLED) |
| 1604 | nflg &= ~(WS_THICKFRAME | WS_MAXIMIZEBOX); |
| 1605 | else |
| 1606 | nflg |= (WS_THICKFRAME | WS_MAXIMIZEBOX); |
| 1607 | |
| 1608 | if (nflg != flag || nexflag != exflag) { |
| 1609 | if (nflg != flag) |
| 1610 | SetWindowLong(hwnd, GWL_STYLE, nflg); |
| 1611 | if (nexflag != exflag) |
| 1612 | SetWindowLong(hwnd, GWL_EXSTYLE, nexflag); |
| 1613 | |
| 1614 | SetWindowPos(hwnd, NULL, 0, 0, 0, 0, |
| 1615 | SWP_NOACTIVATE | SWP_NOCOPYBITS | |
| 1616 | SWP_NOMOVE | SWP_NOSIZE | SWP_NOZORDER | |
| 1617 | SWP_FRAMECHANGED); |
| 1618 | |
| 1619 | init_lvl = 2; |
| 1620 | } |
| 1621 | } |
| 1622 | |
| 1623 | /* Oops */ |
| 1624 | if (cfg.resize_action == RESIZE_DISABLED && IsZoomed(hwnd)) { |
| 1625 | force_normal(hwnd); |
| 1626 | init_lvl = 2; |
| 1627 | } |
| 1628 | |
| 1629 | set_title(cfg.wintitle); |
| 1630 | if (IsIconic(hwnd)) { |
| 1631 | SetWindowText(hwnd, |
| 1632 | cfg.win_name_always ? window_name : |
| 1633 | icon_name); |
| 1634 | } |
| 1635 | |
| 1636 | if (strcmp(cfg.font, prev_cfg.font) != 0 || |
| 1637 | strcmp(cfg.line_codepage, prev_cfg.line_codepage) != 0 || |
| 1638 | cfg.fontisbold != prev_cfg.fontisbold || |
| 1639 | cfg.fontheight != prev_cfg.fontheight || |
| 1640 | cfg.fontcharset != prev_cfg.fontcharset || |
| 1641 | cfg.vtmode != prev_cfg.vtmode || |
| 1642 | cfg.bold_colour != prev_cfg.bold_colour || |
| 1643 | (cfg.resize_action != RESIZE_FONT && |
| 1644 | prev_cfg.resize_action == RESIZE_FONT)) |
| 1645 | init_lvl = 2; |
| 1646 | |
| 1647 | InvalidateRect(hwnd, NULL, TRUE); |
| 1648 | reset_window(init_lvl); |
| 1649 | net_pending_errors(); |
| 1650 | } |
| 1651 | break; |
| 1652 | case IDM_COPYALL: |
| 1653 | term_copyall(); |
| 1654 | break; |
| 1655 | case IDM_CLRSB: |
| 1656 | term_clrsb(); |
| 1657 | break; |
| 1658 | case IDM_RESET: |
| 1659 | term_pwron(); |
| 1660 | break; |
| 1661 | case IDM_TEL_AYT: |
| 1662 | back->special(TS_AYT); |
| 1663 | net_pending_errors(); |
| 1664 | break; |
| 1665 | case IDM_TEL_BRK: |
| 1666 | back->special(TS_BRK); |
| 1667 | net_pending_errors(); |
| 1668 | break; |
| 1669 | case IDM_TEL_SYNCH: |
| 1670 | back->special(TS_SYNCH); |
| 1671 | net_pending_errors(); |
| 1672 | break; |
| 1673 | case IDM_TEL_EC: |
| 1674 | back->special(TS_EC); |
| 1675 | net_pending_errors(); |
| 1676 | break; |
| 1677 | case IDM_TEL_EL: |
| 1678 | back->special(TS_EL); |
| 1679 | net_pending_errors(); |
| 1680 | break; |
| 1681 | case IDM_TEL_GA: |
| 1682 | back->special(TS_GA); |
| 1683 | net_pending_errors(); |
| 1684 | break; |
| 1685 | case IDM_TEL_NOP: |
| 1686 | back->special(TS_NOP); |
| 1687 | net_pending_errors(); |
| 1688 | break; |
| 1689 | case IDM_TEL_ABORT: |
| 1690 | back->special(TS_ABORT); |
| 1691 | net_pending_errors(); |
| 1692 | break; |
| 1693 | case IDM_TEL_AO: |
| 1694 | back->special(TS_AO); |
| 1695 | net_pending_errors(); |
| 1696 | break; |
| 1697 | case IDM_TEL_IP: |
| 1698 | back->special(TS_IP); |
| 1699 | net_pending_errors(); |
| 1700 | break; |
| 1701 | case IDM_TEL_SUSP: |
| 1702 | back->special(TS_SUSP); |
| 1703 | net_pending_errors(); |
| 1704 | break; |
| 1705 | case IDM_TEL_EOR: |
| 1706 | back->special(TS_EOR); |
| 1707 | net_pending_errors(); |
| 1708 | break; |
| 1709 | case IDM_TEL_EOF: |
| 1710 | back->special(TS_EOF); |
| 1711 | net_pending_errors(); |
| 1712 | break; |
| 1713 | case IDM_ABOUT: |
| 1714 | showabout(hwnd); |
| 1715 | break; |
| 1716 | case SC_MOUSEMENU: |
| 1717 | /* |
| 1718 | * We get this if the System menu has been activated |
| 1719 | * using the mouse. |
| 1720 | */ |
| 1721 | show_mouseptr(1); |
| 1722 | break; |
| 1723 | case SC_KEYMENU: |
| 1724 | /* |
| 1725 | * We get this if the System menu has been activated |
| 1726 | * using the keyboard. This might happen from within |
| 1727 | * TranslateKey, in which case it really wants to be |
| 1728 | * followed by a `space' character to actually _bring |
| 1729 | * the menu up_ rather than just sitting there in |
| 1730 | * `ready to appear' state. |
| 1731 | */ |
| 1732 | show_mouseptr(1); /* make sure pointer is visible */ |
| 1733 | if( lParam == 0 ) |
| 1734 | PostMessage(hwnd, WM_CHAR, ' ', 0); |
| 1735 | break; |
| 1736 | case IDM_FULLSCREEN: |
| 1737 | flip_full_screen(); |
| 1738 | break; |
| 1739 | default: |
| 1740 | if (wParam >= IDM_SAVED_MIN && wParam <= IDM_SAVED_MAX) { |
| 1741 | SendMessage(hwnd, WM_SYSCOMMAND, IDM_SAVEDSESS, wParam); |
| 1742 | } |
| 1743 | } |
| 1744 | break; |
| 1745 | |
| 1746 | #define X_POS(l) ((int)(short)LOWORD(l)) |
| 1747 | #define Y_POS(l) ((int)(short)HIWORD(l)) |
| 1748 | |
| 1749 | #define TO_CHR_X(x) ((((x)<0 ? (x)-font_width+1 : (x))-offset_width) / font_width) |
| 1750 | #define TO_CHR_Y(y) ((((y)<0 ? (y)-font_height+1: (y))-offset_height) / font_height) |
| 1751 | #define WHEEL_DELTA 120 |
| 1752 | case WM_MOUSEWHEEL: |
| 1753 | { |
| 1754 | wheel_accumulator += (short) HIWORD(wParam); |
| 1755 | wParam = LOWORD(wParam); |
| 1756 | |
| 1757 | /* process events when the threshold is reached */ |
| 1758 | while (abs(wheel_accumulator) >= WHEEL_DELTA) { |
| 1759 | int b; |
| 1760 | |
| 1761 | /* reduce amount for next time */ |
| 1762 | if (wheel_accumulator > 0) { |
| 1763 | b = MBT_WHEEL_UP; |
| 1764 | wheel_accumulator -= WHEEL_DELTA; |
| 1765 | } else if (wheel_accumulator < 0) { |
| 1766 | b = MBT_WHEEL_DOWN; |
| 1767 | wheel_accumulator += WHEEL_DELTA; |
| 1768 | } else |
| 1769 | break; |
| 1770 | |
| 1771 | if (send_raw_mouse) { |
| 1772 | /* send a mouse-down followed by a mouse up */ |
| 1773 | |
| 1774 | term_mouse(b, |
| 1775 | MA_CLICK, |
| 1776 | TO_CHR_X(X_POS(lParam)), |
| 1777 | TO_CHR_Y(Y_POS(lParam)), wParam & MK_SHIFT, |
| 1778 | wParam & MK_CONTROL, is_alt_pressed()); |
| 1779 | term_mouse(b, MA_RELEASE, TO_CHR_X(X_POS(lParam)), |
| 1780 | TO_CHR_Y(Y_POS(lParam)), wParam & MK_SHIFT, |
| 1781 | wParam & MK_CONTROL, is_alt_pressed()); |
| 1782 | } else { |
| 1783 | /* trigger a scroll */ |
| 1784 | term_scroll(0, |
| 1785 | b == MBT_WHEEL_UP ? -rows / 2 : rows / 2); |
| 1786 | } |
| 1787 | } |
| 1788 | return 0; |
| 1789 | } |
| 1790 | case WM_LBUTTONDOWN: |
| 1791 | case WM_MBUTTONDOWN: |
| 1792 | case WM_RBUTTONDOWN: |
| 1793 | case WM_LBUTTONUP: |
| 1794 | case WM_MBUTTONUP: |
| 1795 | case WM_RBUTTONUP: |
| 1796 | { |
| 1797 | int button, press; |
| 1798 | |
| 1799 | switch (message) { |
| 1800 | case WM_LBUTTONDOWN: |
| 1801 | button = MBT_LEFT; |
| 1802 | press = 1; |
| 1803 | break; |
| 1804 | case WM_MBUTTONDOWN: |
| 1805 | button = MBT_MIDDLE; |
| 1806 | press = 1; |
| 1807 | break; |
| 1808 | case WM_RBUTTONDOWN: |
| 1809 | button = MBT_RIGHT; |
| 1810 | press = 1; |
| 1811 | break; |
| 1812 | case WM_LBUTTONUP: |
| 1813 | button = MBT_LEFT; |
| 1814 | press = 0; |
| 1815 | break; |
| 1816 | case WM_MBUTTONUP: |
| 1817 | button = MBT_MIDDLE; |
| 1818 | press = 0; |
| 1819 | break; |
| 1820 | case WM_RBUTTONUP: |
| 1821 | button = MBT_RIGHT; |
| 1822 | press = 0; |
| 1823 | break; |
| 1824 | default: |
| 1825 | button = press = 0; /* shouldn't happen */ |
| 1826 | } |
| 1827 | show_mouseptr(1); |
| 1828 | /* |
| 1829 | * Special case: in full-screen mode, if the left |
| 1830 | * button is clicked in the very top left corner of the |
| 1831 | * window, we put up the System menu instead of doing |
| 1832 | * selection. |
| 1833 | */ |
| 1834 | if (full_screen && press && button == MBT_LEFT && |
| 1835 | X_POS(lParam) == 0 && Y_POS(lParam) == 0) { |
| 1836 | SendMessage(hwnd, WM_SYSCOMMAND, SC_MOUSEMENU, 0); |
| 1837 | return 0; |
| 1838 | } |
| 1839 | if (press) { |
| 1840 | click(button, |
| 1841 | TO_CHR_X(X_POS(lParam)), TO_CHR_Y(Y_POS(lParam)), |
| 1842 | wParam & MK_SHIFT, wParam & MK_CONTROL, |
| 1843 | is_alt_pressed()); |
| 1844 | SetCapture(hwnd); |
| 1845 | } else { |
| 1846 | term_mouse(button, MA_RELEASE, |
| 1847 | TO_CHR_X(X_POS(lParam)), |
| 1848 | TO_CHR_Y(Y_POS(lParam)), wParam & MK_SHIFT, |
| 1849 | wParam & MK_CONTROL, is_alt_pressed()); |
| 1850 | ReleaseCapture(); |
| 1851 | } |
| 1852 | } |
| 1853 | return 0; |
| 1854 | case WM_MOUSEMOVE: |
| 1855 | show_mouseptr(1); |
| 1856 | /* |
| 1857 | * Add the mouse position and message time to the random |
| 1858 | * number noise. |
| 1859 | */ |
| 1860 | noise_ultralight(lParam); |
| 1861 | |
| 1862 | if (wParam & (MK_LBUTTON | MK_MBUTTON | MK_RBUTTON)) { |
| 1863 | Mouse_Button b; |
| 1864 | if (wParam & MK_LBUTTON) |
| 1865 | b = MBT_LEFT; |
| 1866 | else if (wParam & MK_MBUTTON) |
| 1867 | b = MBT_MIDDLE; |
| 1868 | else |
| 1869 | b = MBT_RIGHT; |
| 1870 | term_mouse(b, MA_DRAG, TO_CHR_X(X_POS(lParam)), |
| 1871 | TO_CHR_Y(Y_POS(lParam)), wParam & MK_SHIFT, |
| 1872 | wParam & MK_CONTROL, is_alt_pressed()); |
| 1873 | } |
| 1874 | return 0; |
| 1875 | case WM_NCMOUSEMOVE: |
| 1876 | show_mouseptr(1); |
| 1877 | noise_ultralight(lParam); |
| 1878 | return 0; |
| 1879 | case WM_IGNORE_CLIP: |
| 1880 | ignore_clip = wParam; /* don't panic on DESTROYCLIPBOARD */ |
| 1881 | break; |
| 1882 | case WM_DESTROYCLIPBOARD: |
| 1883 | if (!ignore_clip) |
| 1884 | term_deselect(); |
| 1885 | ignore_clip = FALSE; |
| 1886 | return 0; |
| 1887 | case WM_PAINT: |
| 1888 | { |
| 1889 | PAINTSTRUCT p; |
| 1890 | HideCaret(hwnd); |
| 1891 | hdc = BeginPaint(hwnd, &p); |
| 1892 | if (pal) { |
| 1893 | SelectPalette(hdc, pal, TRUE); |
| 1894 | RealizePalette(hdc); |
| 1895 | } |
| 1896 | term_paint(hdc, |
| 1897 | (p.rcPaint.left-offset_width)/font_width, |
| 1898 | (p.rcPaint.top-offset_height)/font_height, |
| 1899 | (p.rcPaint.right-offset_width-1)/font_width, |
| 1900 | (p.rcPaint.bottom-offset_height-1)/font_height); |
| 1901 | |
| 1902 | if (p.fErase || |
| 1903 | p.rcPaint.left < offset_width || |
| 1904 | p.rcPaint.top < offset_height || |
| 1905 | p.rcPaint.right >= offset_width + font_width*cols || |
| 1906 | p.rcPaint.bottom>= offset_height + font_height*rows) |
| 1907 | { |
| 1908 | HBRUSH fillcolour, oldbrush; |
| 1909 | HPEN edge, oldpen; |
| 1910 | fillcolour = CreateSolidBrush ( |
| 1911 | colours[(ATTR_DEFBG>>ATTR_BGSHIFT)*2]); |
| 1912 | oldbrush = SelectObject(hdc, fillcolour); |
| 1913 | edge = CreatePen(PS_SOLID, 0, |
| 1914 | colours[(ATTR_DEFBG>>ATTR_BGSHIFT)*2]); |
| 1915 | oldpen = SelectObject(hdc, edge); |
| 1916 | |
| 1917 | ExcludeClipRect(hdc, |
| 1918 | offset_width, offset_height, |
| 1919 | offset_width+font_width*cols, |
| 1920 | offset_height+font_height*rows); |
| 1921 | |
| 1922 | Rectangle(hdc, p.rcPaint.left, p.rcPaint.top, |
| 1923 | p.rcPaint.right, p.rcPaint.bottom); |
| 1924 | |
| 1925 | // SelectClipRgn(hdc, NULL); |
| 1926 | |
| 1927 | SelectObject(hdc, oldbrush); |
| 1928 | DeleteObject(fillcolour); |
| 1929 | SelectObject(hdc, oldpen); |
| 1930 | DeleteObject(edge); |
| 1931 | } |
| 1932 | SelectObject(hdc, GetStockObject(SYSTEM_FONT)); |
| 1933 | SelectObject(hdc, GetStockObject(WHITE_PEN)); |
| 1934 | EndPaint(hwnd, &p); |
| 1935 | ShowCaret(hwnd); |
| 1936 | } |
| 1937 | return 0; |
| 1938 | case WM_NETEVENT: |
| 1939 | /* Notice we can get multiple netevents, FD_READ, FD_WRITE etc |
| 1940 | * but the only one that's likely to try to overload us is FD_READ. |
| 1941 | * This means buffering just one is fine. |
| 1942 | */ |
| 1943 | if (pending_netevent) |
| 1944 | enact_pending_netevent(); |
| 1945 | |
| 1946 | pending_netevent = TRUE; |
| 1947 | pend_netevent_wParam = wParam; |
| 1948 | pend_netevent_lParam = lParam; |
| 1949 | if (WSAGETSELECTEVENT(lParam) != FD_READ) |
| 1950 | enact_pending_netevent(); |
| 1951 | |
| 1952 | time(&last_movement); |
| 1953 | return 0; |
| 1954 | case WM_SETFOCUS: |
| 1955 | has_focus = TRUE; |
| 1956 | CreateCaret(hwnd, caretbm, font_width, font_height); |
| 1957 | ShowCaret(hwnd); |
| 1958 | flash_window(0); /* stop */ |
| 1959 | compose_state = 0; |
| 1960 | term_out(); |
| 1961 | term_update(); |
| 1962 | break; |
| 1963 | case WM_KILLFOCUS: |
| 1964 | show_mouseptr(1); |
| 1965 | has_focus = FALSE; |
| 1966 | DestroyCaret(); |
| 1967 | term_out(); |
| 1968 | term_update(); |
| 1969 | break; |
| 1970 | case WM_ENTERSIZEMOVE: |
| 1971 | #ifdef RDB_DEBUG_PATCH |
| 1972 | debug((27, "WM_ENTERSIZEMOVE")); |
| 1973 | #endif |
| 1974 | EnableSizeTip(1); |
| 1975 | resizing = TRUE; |
| 1976 | need_backend_resize = FALSE; |
| 1977 | break; |
| 1978 | case WM_EXITSIZEMOVE: |
| 1979 | EnableSizeTip(0); |
| 1980 | resizing = FALSE; |
| 1981 | #ifdef RDB_DEBUG_PATCH |
| 1982 | debug((27, "WM_EXITSIZEMOVE")); |
| 1983 | #endif |
| 1984 | if (need_backend_resize) { |
| 1985 | term_size(cfg.height, cfg.width, cfg.savelines); |
| 1986 | InvalidateRect(hwnd, NULL, TRUE); |
| 1987 | } |
| 1988 | break; |
| 1989 | case WM_SIZING: |
| 1990 | /* |
| 1991 | * This does two jobs: |
| 1992 | * 1) Keep the sizetip uptodate |
| 1993 | * 2) Make sure the window size is _stepped_ in units of the font size. |
| 1994 | */ |
| 1995 | if (cfg.resize_action == RESIZE_TERM && !alt_pressed) { |
| 1996 | int width, height, w, h, ew, eh; |
| 1997 | LPRECT r = (LPRECT) lParam; |
| 1998 | |
| 1999 | if ( !need_backend_resize && |
| 2000 | (cfg.height != rows || cfg.width != cols )) { |
| 2001 | /* |
| 2002 | * Great! It seems the host has been changing the terminal |
| 2003 | * size, well the user is now grabbing so this is probably |
| 2004 | * the least confusing solution in the long run even though |
| 2005 | * it a is suprise. Unfortunatly the only way to prevent |
| 2006 | * this seems to be to let the host change the window size |
| 2007 | * and as that's a user option we're still right back here. |
| 2008 | */ |
| 2009 | term_size(cfg.height, cfg.width, cfg.savelines); |
| 2010 | reset_window(2); |
| 2011 | InvalidateRect(hwnd, NULL, TRUE); |
| 2012 | need_backend_resize = TRUE; |
| 2013 | } |
| 2014 | |
| 2015 | width = r->right - r->left - extra_width; |
| 2016 | height = r->bottom - r->top - extra_height; |
| 2017 | w = (width + font_width / 2) / font_width; |
| 2018 | if (w < 1) |
| 2019 | w = 1; |
| 2020 | h = (height + font_height / 2) / font_height; |
| 2021 | if (h < 1) |
| 2022 | h = 1; |
| 2023 | UpdateSizeTip(hwnd, w, h); |
| 2024 | ew = width - w * font_width; |
| 2025 | eh = height - h * font_height; |
| 2026 | if (ew != 0) { |
| 2027 | if (wParam == WMSZ_LEFT || |
| 2028 | wParam == WMSZ_BOTTOMLEFT || wParam == WMSZ_TOPLEFT) |
| 2029 | r->left += ew; |
| 2030 | else |
| 2031 | r->right -= ew; |
| 2032 | } |
| 2033 | if (eh != 0) { |
| 2034 | if (wParam == WMSZ_TOP || |
| 2035 | wParam == WMSZ_TOPRIGHT || wParam == WMSZ_TOPLEFT) |
| 2036 | r->top += eh; |
| 2037 | else |
| 2038 | r->bottom -= eh; |
| 2039 | } |
| 2040 | if (ew || eh) |
| 2041 | return 1; |
| 2042 | else |
| 2043 | return 0; |
| 2044 | } else { |
| 2045 | int width, height, w, h, rv = 0; |
| 2046 | int ex_width = extra_width + (cfg.window_border - offset_width) * 2; |
| 2047 | int ex_height = extra_height + (cfg.window_border - offset_height) * 2; |
| 2048 | LPRECT r = (LPRECT) lParam; |
| 2049 | |
| 2050 | width = r->right - r->left - ex_width; |
| 2051 | height = r->bottom - r->top - ex_height; |
| 2052 | |
| 2053 | w = (width + cols/2)/cols; |
| 2054 | h = (height + rows/2)/rows; |
| 2055 | if ( r->right != r->left + w*cols + ex_width) |
| 2056 | rv = 1; |
| 2057 | |
| 2058 | if (wParam == WMSZ_LEFT || |
| 2059 | wParam == WMSZ_BOTTOMLEFT || wParam == WMSZ_TOPLEFT) |
| 2060 | r->left = r->right - w*cols - ex_width; |
| 2061 | else |
| 2062 | r->right = r->left + w*cols + ex_width; |
| 2063 | |
| 2064 | if (r->bottom != r->top + h*rows + ex_height) |
| 2065 | rv = 1; |
| 2066 | |
| 2067 | if (wParam == WMSZ_TOP || |
| 2068 | wParam == WMSZ_TOPRIGHT || wParam == WMSZ_TOPLEFT) |
| 2069 | r->top = r->bottom - h*rows - ex_height; |
| 2070 | else |
| 2071 | r->bottom = r->top + h*rows + ex_height; |
| 2072 | |
| 2073 | return rv; |
| 2074 | } |
| 2075 | /* break; (never reached) */ |
| 2076 | case WM_SIZE: |
| 2077 | #ifdef RDB_DEBUG_PATCH |
| 2078 | debug((27, "WM_SIZE %s (%d,%d)", |
| 2079 | (wParam == SIZE_MINIMIZED) ? "SIZE_MINIMIZED": |
| 2080 | (wParam == SIZE_MAXIMIZED) ? "SIZE_MAXIMIZED": |
| 2081 | (wParam == SIZE_RESTORED && resizing) ? "to": |
| 2082 | (wParam == SIZE_RESTORED) ? "SIZE_RESTORED": |
| 2083 | "...", |
| 2084 | LOWORD(lParam), HIWORD(lParam))); |
| 2085 | #endif |
| 2086 | if (wParam == SIZE_MINIMIZED) { |
| 2087 | SetWindowText(hwnd, |
| 2088 | cfg.win_name_always ? window_name : icon_name); |
| 2089 | break; |
| 2090 | } |
| 2091 | if (wParam == SIZE_RESTORED || wParam == SIZE_MAXIMIZED) |
| 2092 | SetWindowText(hwnd, window_name); |
| 2093 | |
| 2094 | if (cfg.resize_action == RESIZE_DISABLED) { |
| 2095 | /* A resize, well it better be a minimize. */ |
| 2096 | reset_window(-1); |
| 2097 | } else { |
| 2098 | |
| 2099 | int width, height, w, h; |
| 2100 | |
| 2101 | width = LOWORD(lParam); |
| 2102 | height = HIWORD(lParam); |
| 2103 | |
| 2104 | if (!resizing) { |
| 2105 | if (wParam == SIZE_MAXIMIZED) { |
| 2106 | was_zoomed = 1; |
| 2107 | prev_rows = rows; |
| 2108 | prev_cols = cols; |
| 2109 | if (cfg.resize_action != RESIZE_FONT) { |
| 2110 | w = width / font_width; |
| 2111 | if (w < 1) w = 1; |
| 2112 | h = height / font_height; |
| 2113 | if (h < 1) h = 1; |
| 2114 | |
| 2115 | term_size(h, w, cfg.savelines); |
| 2116 | } |
| 2117 | reset_window(0); |
| 2118 | } else if (wParam == SIZE_RESTORED && was_zoomed) { |
| 2119 | was_zoomed = 0; |
| 2120 | if (cfg.resize_action != RESIZE_FONT) |
| 2121 | term_size(prev_rows, prev_cols, cfg.savelines); |
| 2122 | reset_window(0); |
| 2123 | } |
| 2124 | /* This is an unexpected resize, these will normally happen |
| 2125 | * if the window is too large. Probably either the user |
| 2126 | * selected a huge font or the screen size has changed. |
| 2127 | * |
| 2128 | * This is also called with minimize. |
| 2129 | */ |
| 2130 | else reset_window(-1); |
| 2131 | } |
| 2132 | |
| 2133 | /* |
| 2134 | * Don't call back->size in mid-resize. (To prevent |
| 2135 | * massive numbers of resize events getting sent |
| 2136 | * down the connection during an NT opaque drag.) |
| 2137 | */ |
| 2138 | if (resizing) { |
| 2139 | if (cfg.resize_action == RESIZE_TERM && !alt_pressed) { |
| 2140 | need_backend_resize = TRUE; |
| 2141 | w = (width-cfg.window_border*2) / font_width; |
| 2142 | if (w < 1) w = 1; |
| 2143 | h = (height-cfg.window_border*2) / font_height; |
| 2144 | if (h < 1) h = 1; |
| 2145 | |
| 2146 | cfg.height = h; |
| 2147 | cfg.width = w; |
| 2148 | } else |
| 2149 | reset_window(0); |
| 2150 | } |
| 2151 | } |
| 2152 | return 0; |
| 2153 | case WM_VSCROLL: |
| 2154 | switch (LOWORD(wParam)) { |
| 2155 | case SB_BOTTOM: |
| 2156 | term_scroll(-1, 0); |
| 2157 | break; |
| 2158 | case SB_TOP: |
| 2159 | term_scroll(+1, 0); |
| 2160 | break; |
| 2161 | case SB_LINEDOWN: |
| 2162 | term_scroll(0, +1); |
| 2163 | break; |
| 2164 | case SB_LINEUP: |
| 2165 | term_scroll(0, -1); |
| 2166 | break; |
| 2167 | case SB_PAGEDOWN: |
| 2168 | term_scroll(0, +rows / 2); |
| 2169 | break; |
| 2170 | case SB_PAGEUP: |
| 2171 | term_scroll(0, -rows / 2); |
| 2172 | break; |
| 2173 | case SB_THUMBPOSITION: |
| 2174 | case SB_THUMBTRACK: |
| 2175 | term_scroll(1, HIWORD(wParam)); |
| 2176 | break; |
| 2177 | } |
| 2178 | break; |
| 2179 | case WM_PALETTECHANGED: |
| 2180 | if ((HWND) wParam != hwnd && pal != NULL) { |
| 2181 | HDC hdc = get_ctx(); |
| 2182 | if (hdc) { |
| 2183 | if (RealizePalette(hdc) > 0) |
| 2184 | UpdateColors(hdc); |
| 2185 | free_ctx(hdc); |
| 2186 | } |
| 2187 | } |
| 2188 | break; |
| 2189 | case WM_QUERYNEWPALETTE: |
| 2190 | if (pal != NULL) { |
| 2191 | HDC hdc = get_ctx(); |
| 2192 | if (hdc) { |
| 2193 | if (RealizePalette(hdc) > 0) |
| 2194 | UpdateColors(hdc); |
| 2195 | free_ctx(hdc); |
| 2196 | return TRUE; |
| 2197 | } |
| 2198 | } |
| 2199 | return FALSE; |
| 2200 | case WM_KEYDOWN: |
| 2201 | case WM_SYSKEYDOWN: |
| 2202 | case WM_KEYUP: |
| 2203 | case WM_SYSKEYUP: |
| 2204 | /* |
| 2205 | * Add the scan code and keypress timing to the random |
| 2206 | * number noise. |
| 2207 | */ |
| 2208 | noise_ultralight(lParam); |
| 2209 | |
| 2210 | /* |
| 2211 | * We don't do TranslateMessage since it disassociates the |
| 2212 | * resulting CHAR message from the KEYDOWN that sparked it, |
| 2213 | * which we occasionally don't want. Instead, we process |
| 2214 | * KEYDOWN, and call the Win32 translator functions so that |
| 2215 | * we get the translations under _our_ control. |
| 2216 | */ |
| 2217 | { |
| 2218 | unsigned char buf[20]; |
| 2219 | int len; |
| 2220 | |
| 2221 | if (wParam == VK_PROCESSKEY) { |
| 2222 | MSG m; |
| 2223 | m.hwnd = hwnd; |
| 2224 | m.message = WM_KEYDOWN; |
| 2225 | m.wParam = wParam; |
| 2226 | m.lParam = lParam & 0xdfff; |
| 2227 | TranslateMessage(&m); |
| 2228 | } else { |
| 2229 | len = TranslateKey(message, wParam, lParam, buf); |
| 2230 | if (len == -1) |
| 2231 | return DefWindowProc(hwnd, message, wParam, lParam); |
| 2232 | |
| 2233 | if (len != 0) { |
| 2234 | /* |
| 2235 | * Interrupt an ongoing paste. I'm not sure |
| 2236 | * this is sensible, but for the moment it's |
| 2237 | * preferable to having to faff about buffering |
| 2238 | * things. |
| 2239 | */ |
| 2240 | term_nopaste(); |
| 2241 | |
| 2242 | /* |
| 2243 | * We need not bother about stdin backlogs |
| 2244 | * here, because in GUI PuTTY we can't do |
| 2245 | * anything about it anyway; there's no means |
| 2246 | * of asking Windows to hold off on KEYDOWN |
| 2247 | * messages. We _have_ to buffer everything |
| 2248 | * we're sent. |
| 2249 | */ |
| 2250 | ldisc_send(buf, len, 1); |
| 2251 | show_mouseptr(0); |
| 2252 | } |
| 2253 | } |
| 2254 | } |
| 2255 | net_pending_errors(); |
| 2256 | return 0; |
| 2257 | case WM_INPUTLANGCHANGE: |
| 2258 | { |
| 2259 | /* wParam == Font number */ |
| 2260 | /* lParam == Locale */ |
| 2261 | char lbuf[20]; |
| 2262 | HKL NewInputLocale = (HKL) lParam; |
| 2263 | |
| 2264 | // lParam == GetKeyboardLayout(0); |
| 2265 | |
| 2266 | GetLocaleInfo(LOWORD(NewInputLocale), |
| 2267 | LOCALE_IDEFAULTANSICODEPAGE, lbuf, sizeof(lbuf)); |
| 2268 | |
| 2269 | kbd_codepage = atoi(lbuf); |
| 2270 | } |
| 2271 | break; |
| 2272 | case WM_IME_NOTIFY: |
| 2273 | if(wParam == IMN_SETOPENSTATUS) { |
| 2274 | HIMC hImc = ImmGetContext(hwnd); |
| 2275 | ImmSetCompositionFont(hImc, &lfont); |
| 2276 | ImmReleaseContext(hwnd, hImc); |
| 2277 | return 0; |
| 2278 | } |
| 2279 | break; |
| 2280 | case WM_IME_COMPOSITION: |
| 2281 | { |
| 2282 | HIMC hIMC; |
| 2283 | int n; |
| 2284 | char *buff; |
| 2285 | |
| 2286 | if(osVersion.dwPlatformId == VER_PLATFORM_WIN32_WINDOWS || |
| 2287 | osVersion.dwPlatformId == VER_PLATFORM_WIN32s) break; /* no Unicode */ |
| 2288 | |
| 2289 | if ((lParam & GCS_RESULTSTR) == 0) /* Composition unfinished. */ |
| 2290 | break; /* fall back to DefWindowProc */ |
| 2291 | |
| 2292 | hIMC = ImmGetContext(hwnd); |
| 2293 | n = ImmGetCompositionStringW(hIMC, GCS_RESULTSTR, NULL, 0); |
| 2294 | |
| 2295 | if (n > 0) { |
| 2296 | buff = (char*) smalloc(n); |
| 2297 | ImmGetCompositionStringW(hIMC, GCS_RESULTSTR, buff, n); |
| 2298 | luni_send((unsigned short *)buff, n / 2, 1); |
| 2299 | free(buff); |
| 2300 | } |
| 2301 | ImmReleaseContext(hwnd, hIMC); |
| 2302 | return 1; |
| 2303 | } |
| 2304 | |
| 2305 | case WM_IME_CHAR: |
| 2306 | if (wParam & 0xFF00) { |
| 2307 | unsigned char buf[2]; |
| 2308 | |
| 2309 | buf[1] = wParam; |
| 2310 | buf[0] = wParam >> 8; |
| 2311 | lpage_send(kbd_codepage, buf, 2, 1); |
| 2312 | } else { |
| 2313 | char c = (unsigned char) wParam; |
| 2314 | lpage_send(kbd_codepage, &c, 1, 1); |
| 2315 | } |
| 2316 | return (0); |
| 2317 | case WM_CHAR: |
| 2318 | case WM_SYSCHAR: |
| 2319 | /* |
| 2320 | * Nevertheless, we are prepared to deal with WM_CHAR |
| 2321 | * messages, should they crop up. So if someone wants to |
| 2322 | * post the things to us as part of a macro manoeuvre, |
| 2323 | * we're ready to cope. |
| 2324 | */ |
| 2325 | { |
| 2326 | char c = (unsigned char)wParam; |
| 2327 | lpage_send(CP_ACP, &c, 1, 1); |
| 2328 | } |
| 2329 | return 0; |
| 2330 | case WM_SETCURSOR: |
| 2331 | if (send_raw_mouse && LOWORD(lParam) == HTCLIENT) { |
| 2332 | SetCursor(LoadCursor(NULL, IDC_ARROW)); |
| 2333 | return TRUE; |
| 2334 | } |
| 2335 | } |
| 2336 | |
| 2337 | return DefWindowProc(hwnd, message, wParam, lParam); |
| 2338 | } |
| 2339 | |
| 2340 | /* |
| 2341 | * Move the system caret. (We maintain one, even though it's |
| 2342 | * invisible, for the benefit of blind people: apparently some |
| 2343 | * helper software tracks the system caret, so we should arrange to |
| 2344 | * have one.) |
| 2345 | */ |
| 2346 | void sys_cursor(int x, int y) |
| 2347 | { |
| 2348 | COMPOSITIONFORM cf; |
| 2349 | HIMC hIMC; |
| 2350 | |
| 2351 | if (!has_focus) return; |
| 2352 | |
| 2353 | SetCaretPos(x * font_width + offset_width, |
| 2354 | y * font_height + offset_height); |
| 2355 | |
| 2356 | /* IMM calls on Win98 and beyond only */ |
| 2357 | if(osVersion.dwPlatformId == VER_PLATFORM_WIN32s) return; /* 3.11 */ |
| 2358 | |
| 2359 | if(osVersion.dwPlatformId == VER_PLATFORM_WIN32_WINDOWS && |
| 2360 | osVersion.dwMinorVersion == 0) return; /* 95 */ |
| 2361 | |
| 2362 | /* we should have the IMM functions */ |
| 2363 | hIMC = ImmGetContext(hwnd); |
| 2364 | cf.dwStyle = CFS_POINT; |
| 2365 | cf.ptCurrentPos.x = x * font_width + offset_width; |
| 2366 | cf.ptCurrentPos.y = y * font_height + offset_height; |
| 2367 | ImmSetCompositionWindow(hIMC, &cf); |
| 2368 | |
| 2369 | ImmReleaseContext(hwnd, hIMC); |
| 2370 | } |
| 2371 | |
| 2372 | /* |
| 2373 | * Draw a line of text in the window, at given character |
| 2374 | * coordinates, in given attributes. |
| 2375 | * |
| 2376 | * We are allowed to fiddle with the contents of `text'. |
| 2377 | */ |
| 2378 | void do_text(Context ctx, int x, int y, char *text, int len, |
| 2379 | unsigned long attr, int lattr) |
| 2380 | { |
| 2381 | COLORREF fg, bg, t; |
| 2382 | int nfg, nbg, nfont; |
| 2383 | HDC hdc = ctx; |
| 2384 | RECT line_box; |
| 2385 | int force_manual_underline = 0; |
| 2386 | int fnt_width = font_width * (1 + (lattr != LATTR_NORM)); |
| 2387 | int char_width = fnt_width; |
| 2388 | int text_adjust = 0; |
| 2389 | static int *IpDx = 0, IpDxLEN = 0; |
| 2390 | |
| 2391 | if (attr & ATTR_WIDE) |
| 2392 | char_width *= 2; |
| 2393 | |
| 2394 | if (len > IpDxLEN || IpDx[0] != char_width) { |
| 2395 | int i; |
| 2396 | if (len > IpDxLEN) { |
| 2397 | sfree(IpDx); |
| 2398 | IpDx = smalloc((len + 16) * sizeof(int)); |
| 2399 | IpDxLEN = (len + 16); |
| 2400 | } |
| 2401 | for (i = 0; i < IpDxLEN; i++) |
| 2402 | IpDx[i] = char_width; |
| 2403 | } |
| 2404 | |
| 2405 | /* Only want the left half of double width lines */ |
| 2406 | if (lattr != LATTR_NORM && x*2 >= cols) |
| 2407 | return; |
| 2408 | |
| 2409 | x *= fnt_width; |
| 2410 | y *= font_height; |
| 2411 | x += offset_width; |
| 2412 | y += offset_height; |
| 2413 | |
| 2414 | if ((attr & TATTR_ACTCURS) && (cfg.cursor_type == 0 || big_cursor)) { |
| 2415 | attr &= ATTR_CUR_AND | (bold_mode != BOLD_COLOURS ? ATTR_BOLD : 0); |
| 2416 | attr ^= ATTR_CUR_XOR; |
| 2417 | } |
| 2418 | |
| 2419 | nfont = 0; |
| 2420 | if (cfg.vtmode == VT_POORMAN && lattr != LATTR_NORM) { |
| 2421 | /* Assume a poorman font is borken in other ways too. */ |
| 2422 | lattr = LATTR_WIDE; |
| 2423 | } else |
| 2424 | switch (lattr) { |
| 2425 | case LATTR_NORM: |
| 2426 | break; |
| 2427 | case LATTR_WIDE: |
| 2428 | nfont |= FONT_WIDE; |
| 2429 | break; |
| 2430 | default: |
| 2431 | nfont |= FONT_WIDE + FONT_HIGH; |
| 2432 | break; |
| 2433 | } |
| 2434 | if (attr & ATTR_NARROW) |
| 2435 | nfont |= FONT_NARROW; |
| 2436 | |
| 2437 | /* Special hack for the VT100 linedraw glyphs. */ |
| 2438 | if ((attr & CSET_MASK) == 0x2300) { |
| 2439 | if (text[0] >= (char) 0xBA && text[0] <= (char) 0xBD) { |
| 2440 | switch ((unsigned char) (text[0])) { |
| 2441 | case 0xBA: |
| 2442 | text_adjust = -2 * font_height / 5; |
| 2443 | break; |
| 2444 | case 0xBB: |
| 2445 | text_adjust = -1 * font_height / 5; |
| 2446 | break; |
| 2447 | case 0xBC: |
| 2448 | text_adjust = font_height / 5; |
| 2449 | break; |
| 2450 | case 0xBD: |
| 2451 | text_adjust = 2 * font_height / 5; |
| 2452 | break; |
| 2453 | } |
| 2454 | if (lattr == LATTR_TOP || lattr == LATTR_BOT) |
| 2455 | text_adjust *= 2; |
| 2456 | attr &= ~CSET_MASK; |
| 2457 | text[0] = (char) (unitab_xterm['q'] & CHAR_MASK); |
| 2458 | attr |= (unitab_xterm['q'] & CSET_MASK); |
| 2459 | if (attr & ATTR_UNDER) { |
| 2460 | attr &= ~ATTR_UNDER; |
| 2461 | force_manual_underline = 1; |
| 2462 | } |
| 2463 | } |
| 2464 | } |
| 2465 | |
| 2466 | /* Anything left as an original character set is unprintable. */ |
| 2467 | if (DIRECT_CHAR(attr)) { |
| 2468 | attr &= ~CSET_MASK; |
| 2469 | attr |= 0xFF00; |
| 2470 | memset(text, 0xFD, len); |
| 2471 | } |
| 2472 | |
| 2473 | /* OEM CP */ |
| 2474 | if ((attr & CSET_MASK) == ATTR_OEMCP) |
| 2475 | nfont |= FONT_OEM; |
| 2476 | |
| 2477 | nfg = 2 * ((attr & ATTR_FGMASK) >> ATTR_FGSHIFT); |
| 2478 | nbg = 2 * ((attr & ATTR_BGMASK) >> ATTR_BGSHIFT); |
| 2479 | if (bold_mode == BOLD_FONT && (attr & ATTR_BOLD)) |
| 2480 | nfont |= FONT_BOLD; |
| 2481 | if (und_mode == UND_FONT && (attr & ATTR_UNDER)) |
| 2482 | nfont |= FONT_UNDERLINE; |
| 2483 | another_font(nfont); |
| 2484 | if (!fonts[nfont]) { |
| 2485 | if (nfont & FONT_UNDERLINE) |
| 2486 | force_manual_underline = 1; |
| 2487 | /* Don't do the same for manual bold, it could be bad news. */ |
| 2488 | |
| 2489 | nfont &= ~(FONT_BOLD | FONT_UNDERLINE); |
| 2490 | } |
| 2491 | another_font(nfont); |
| 2492 | if (!fonts[nfont]) |
| 2493 | nfont = FONT_NORMAL; |
| 2494 | if (attr & ATTR_REVERSE) { |
| 2495 | t = nfg; |
| 2496 | nfg = nbg; |
| 2497 | nbg = t; |
| 2498 | } |
| 2499 | if (bold_mode == BOLD_COLOURS && (attr & ATTR_BOLD)) |
| 2500 | nfg++; |
| 2501 | if (bold_mode == BOLD_COLOURS && (attr & ATTR_BLINK)) |
| 2502 | nbg++; |
| 2503 | fg = colours[nfg]; |
| 2504 | bg = colours[nbg]; |
| 2505 | SelectObject(hdc, fonts[nfont]); |
| 2506 | SetTextColor(hdc, fg); |
| 2507 | SetBkColor(hdc, bg); |
| 2508 | SetBkMode(hdc, OPAQUE); |
| 2509 | line_box.left = x; |
| 2510 | line_box.top = y; |
| 2511 | line_box.right = x + char_width * len; |
| 2512 | line_box.bottom = y + font_height; |
| 2513 | |
| 2514 | /* Only want the left half of double width lines */ |
| 2515 | if (line_box.right > font_width*cols+offset_width) |
| 2516 | line_box.right = font_width*cols+offset_width; |
| 2517 | |
| 2518 | /* We're using a private area for direct to font. (512 chars.) */ |
| 2519 | if (dbcs_screenfont && (attr & CSET_MASK) == ATTR_ACP) { |
| 2520 | /* Ho Hum, dbcs fonts are a PITA! */ |
| 2521 | /* To display on W9x I have to convert to UCS */ |
| 2522 | static wchar_t *uni_buf = 0; |
| 2523 | static int uni_len = 0; |
| 2524 | int nlen, mptr; |
| 2525 | if (len > uni_len) { |
| 2526 | sfree(uni_buf); |
| 2527 | uni_buf = smalloc((uni_len = len) * sizeof(wchar_t)); |
| 2528 | } |
| 2529 | |
| 2530 | for(nlen = mptr = 0; mptr<len; mptr++) { |
| 2531 | uni_buf[nlen] = 0xFFFD; |
| 2532 | if (IsDBCSLeadByteEx(font_codepage, (BYTE) text[mptr])) { |
| 2533 | IpDx[nlen] += char_width; |
| 2534 | MultiByteToWideChar(font_codepage, MB_USEGLYPHCHARS, |
| 2535 | text+mptr, 2, uni_buf+nlen, 1); |
| 2536 | mptr++; |
| 2537 | } |
| 2538 | else |
| 2539 | { |
| 2540 | MultiByteToWideChar(font_codepage, MB_USEGLYPHCHARS, |
| 2541 | text+mptr, 1, uni_buf+nlen, 1); |
| 2542 | } |
| 2543 | nlen++; |
| 2544 | } |
| 2545 | if (nlen <= 0) |
| 2546 | return; /* Eeek! */ |
| 2547 | |
| 2548 | ExtTextOutW(hdc, x, |
| 2549 | y - font_height * (lattr == LATTR_BOT) + text_adjust, |
| 2550 | ETO_CLIPPED | ETO_OPAQUE, &line_box, uni_buf, nlen, IpDx); |
| 2551 | if (bold_mode == BOLD_SHADOW && (attr & ATTR_BOLD)) { |
| 2552 | SetBkMode(hdc, TRANSPARENT); |
| 2553 | ExtTextOutW(hdc, x - 1, |
| 2554 | y - font_height * (lattr == |
| 2555 | LATTR_BOT) + text_adjust, |
| 2556 | ETO_CLIPPED, &line_box, uni_buf, nlen, IpDx); |
| 2557 | } |
| 2558 | |
| 2559 | IpDx[0] = -1; |
| 2560 | } else if (DIRECT_FONT(attr)) { |
| 2561 | ExtTextOut(hdc, x, |
| 2562 | y - font_height * (lattr == LATTR_BOT) + text_adjust, |
| 2563 | ETO_CLIPPED | ETO_OPAQUE, &line_box, text, len, IpDx); |
| 2564 | if (bold_mode == BOLD_SHADOW && (attr & ATTR_BOLD)) { |
| 2565 | SetBkMode(hdc, TRANSPARENT); |
| 2566 | |
| 2567 | /* GRR: This draws the character outside it's box and can leave |
| 2568 | * 'droppings' even with the clip box! I suppose I could loop it |
| 2569 | * one character at a time ... yuk. |
| 2570 | * |
| 2571 | * Or ... I could do a test print with "W", and use +1 or -1 for this |
| 2572 | * shift depending on if the leftmost column is blank... |
| 2573 | */ |
| 2574 | ExtTextOut(hdc, x - 1, |
| 2575 | y - font_height * (lattr == |
| 2576 | LATTR_BOT) + text_adjust, |
| 2577 | ETO_CLIPPED, &line_box, text, len, IpDx); |
| 2578 | } |
| 2579 | } else { |
| 2580 | /* And 'normal' unicode characters */ |
| 2581 | static WCHAR *wbuf = NULL; |
| 2582 | static int wlen = 0; |
| 2583 | int i; |
| 2584 | if (wlen < len) { |
| 2585 | sfree(wbuf); |
| 2586 | wlen = len; |
| 2587 | wbuf = smalloc(wlen * sizeof(WCHAR)); |
| 2588 | } |
| 2589 | for (i = 0; i < len; i++) |
| 2590 | wbuf[i] = (WCHAR) ((attr & CSET_MASK) + (text[i] & CHAR_MASK)); |
| 2591 | |
| 2592 | ExtTextOutW(hdc, x, |
| 2593 | y - font_height * (lattr == LATTR_BOT) + text_adjust, |
| 2594 | ETO_CLIPPED | ETO_OPAQUE, &line_box, wbuf, len, IpDx); |
| 2595 | |
| 2596 | /* And the shadow bold hack. */ |
| 2597 | if (bold_mode == BOLD_SHADOW && (attr & ATTR_BOLD)) { |
| 2598 | SetBkMode(hdc, TRANSPARENT); |
| 2599 | ExtTextOutW(hdc, x - 1, |
| 2600 | y - font_height * (lattr == |
| 2601 | LATTR_BOT) + text_adjust, |
| 2602 | ETO_CLIPPED, &line_box, wbuf, len, IpDx); |
| 2603 | } |
| 2604 | } |
| 2605 | if (lattr != LATTR_TOP && (force_manual_underline || |
| 2606 | (und_mode == UND_LINE |
| 2607 | && (attr & ATTR_UNDER)))) { |
| 2608 | HPEN oldpen; |
| 2609 | int dec = descent; |
| 2610 | if (lattr == LATTR_BOT) |
| 2611 | dec = dec * 2 - font_height; |
| 2612 | |
| 2613 | oldpen = SelectObject(hdc, CreatePen(PS_SOLID, 0, fg)); |
| 2614 | MoveToEx(hdc, x, y + dec, NULL); |
| 2615 | LineTo(hdc, x + len * char_width, y + dec); |
| 2616 | oldpen = SelectObject(hdc, oldpen); |
| 2617 | DeleteObject(oldpen); |
| 2618 | } |
| 2619 | } |
| 2620 | |
| 2621 | void do_cursor(Context ctx, int x, int y, char *text, int len, |
| 2622 | unsigned long attr, int lattr) |
| 2623 | { |
| 2624 | |
| 2625 | int fnt_width; |
| 2626 | int char_width; |
| 2627 | HDC hdc = ctx; |
| 2628 | int ctype = cfg.cursor_type; |
| 2629 | |
| 2630 | if ((attr & TATTR_ACTCURS) && (ctype == 0 || big_cursor)) { |
| 2631 | if (((attr & CSET_MASK) | (unsigned char) *text) != UCSWIDE) { |
| 2632 | do_text(ctx, x, y, text, len, attr, lattr); |
| 2633 | return; |
| 2634 | } |
| 2635 | ctype = 2; |
| 2636 | attr |= TATTR_RIGHTCURS; |
| 2637 | } |
| 2638 | |
| 2639 | fnt_width = char_width = font_width * (1 + (lattr != LATTR_NORM)); |
| 2640 | if (attr & ATTR_WIDE) |
| 2641 | char_width *= 2; |
| 2642 | x *= fnt_width; |
| 2643 | y *= font_height; |
| 2644 | x += offset_width; |
| 2645 | y += offset_height; |
| 2646 | |
| 2647 | if ((attr & TATTR_PASCURS) && (ctype == 0 || big_cursor)) { |
| 2648 | POINT pts[5]; |
| 2649 | HPEN oldpen; |
| 2650 | pts[0].x = pts[1].x = pts[4].x = x; |
| 2651 | pts[2].x = pts[3].x = x + char_width - 1; |
| 2652 | pts[0].y = pts[3].y = pts[4].y = y; |
| 2653 | pts[1].y = pts[2].y = y + font_height - 1; |
| 2654 | oldpen = SelectObject(hdc, CreatePen(PS_SOLID, 0, colours[23])); |
| 2655 | Polyline(hdc, pts, 5); |
| 2656 | oldpen = SelectObject(hdc, oldpen); |
| 2657 | DeleteObject(oldpen); |
| 2658 | } else if ((attr & (TATTR_ACTCURS | TATTR_PASCURS)) && ctype != 0) { |
| 2659 | int startx, starty, dx, dy, length, i; |
| 2660 | if (ctype == 1) { |
| 2661 | startx = x; |
| 2662 | starty = y + descent; |
| 2663 | dx = 1; |
| 2664 | dy = 0; |
| 2665 | length = char_width; |
| 2666 | } else { |
| 2667 | int xadjust = 0; |
| 2668 | if (attr & TATTR_RIGHTCURS) |
| 2669 | xadjust = char_width - 1; |
| 2670 | startx = x + xadjust; |
| 2671 | starty = y; |
| 2672 | dx = 0; |
| 2673 | dy = 1; |
| 2674 | length = font_height; |
| 2675 | } |
| 2676 | if (attr & TATTR_ACTCURS) { |
| 2677 | HPEN oldpen; |
| 2678 | oldpen = |
| 2679 | SelectObject(hdc, CreatePen(PS_SOLID, 0, colours[23])); |
| 2680 | MoveToEx(hdc, startx, starty, NULL); |
| 2681 | LineTo(hdc, startx + dx * length, starty + dy * length); |
| 2682 | oldpen = SelectObject(hdc, oldpen); |
| 2683 | DeleteObject(oldpen); |
| 2684 | } else { |
| 2685 | for (i = 0; i < length; i++) { |
| 2686 | if (i % 2 == 0) { |
| 2687 | SetPixel(hdc, startx, starty, colours[23]); |
| 2688 | } |
| 2689 | startx += dx; |
| 2690 | starty += dy; |
| 2691 | } |
| 2692 | } |
| 2693 | } |
| 2694 | } |
| 2695 | |
| 2696 | /* This function gets the actual width of a character in the normal font. |
| 2697 | */ |
| 2698 | int CharWidth(Context ctx, int uc) { |
| 2699 | HDC hdc = ctx; |
| 2700 | int ibuf = 0; |
| 2701 | |
| 2702 | /* If the font max is the same as the font ave width then this |
| 2703 | * function is a no-op. |
| 2704 | */ |
| 2705 | if (!font_dualwidth) return 1; |
| 2706 | |
| 2707 | switch (uc & CSET_MASK) { |
| 2708 | case ATTR_ASCII: |
| 2709 | uc = unitab_line[uc & 0xFF]; |
| 2710 | break; |
| 2711 | case ATTR_LINEDRW: |
| 2712 | uc = unitab_xterm[uc & 0xFF]; |
| 2713 | break; |
| 2714 | case ATTR_SCOACS: |
| 2715 | uc = unitab_scoacs[uc & 0xFF]; |
| 2716 | break; |
| 2717 | } |
| 2718 | if (DIRECT_FONT(uc)) { |
| 2719 | if (dbcs_screenfont) return 1; |
| 2720 | |
| 2721 | /* Speedup, I know of no font where ascii is the wrong width */ |
| 2722 | if ((uc&CHAR_MASK) >= ' ' && (uc&CHAR_MASK)<= '~') |
| 2723 | return 1; |
| 2724 | |
| 2725 | if ( (uc & CSET_MASK) == ATTR_ACP ) { |
| 2726 | SelectObject(hdc, fonts[FONT_NORMAL]); |
| 2727 | } else if ( (uc & CSET_MASK) == ATTR_OEMCP ) { |
| 2728 | another_font(FONT_OEM); |
| 2729 | if (!fonts[FONT_OEM]) return 0; |
| 2730 | |
| 2731 | SelectObject(hdc, fonts[FONT_OEM]); |
| 2732 | } else |
| 2733 | return 0; |
| 2734 | |
| 2735 | if ( GetCharWidth32(hdc, uc&CHAR_MASK, uc&CHAR_MASK, &ibuf) != 1 && |
| 2736 | GetCharWidth(hdc, uc&CHAR_MASK, uc&CHAR_MASK, &ibuf) != 1) |
| 2737 | return 0; |
| 2738 | } else { |
| 2739 | /* Speedup, I know of no font where ascii is the wrong width */ |
| 2740 | if (uc >= ' ' && uc <= '~') return 1; |
| 2741 | |
| 2742 | SelectObject(hdc, fonts[FONT_NORMAL]); |
| 2743 | if ( GetCharWidth32W(hdc, uc, uc, &ibuf) == 1 ) |
| 2744 | /* Okay that one worked */ ; |
| 2745 | else if ( GetCharWidthW(hdc, uc, uc, &ibuf) == 1 ) |
| 2746 | /* This should work on 9x too, but it's "less accurate" */ ; |
| 2747 | else |
| 2748 | return 0; |
| 2749 | } |
| 2750 | |
| 2751 | ibuf += font_width / 2 -1; |
| 2752 | ibuf /= font_width; |
| 2753 | |
| 2754 | return ibuf; |
| 2755 | } |
| 2756 | |
| 2757 | /* |
| 2758 | * Translate a WM_(SYS)?KEY(UP|DOWN) message into a string of ASCII |
| 2759 | * codes. Returns number of bytes used or zero to drop the message |
| 2760 | * or -1 to forward the message to windows. |
| 2761 | */ |
| 2762 | static int TranslateKey(UINT message, WPARAM wParam, LPARAM lParam, |
| 2763 | unsigned char *output) |
| 2764 | { |
| 2765 | BYTE keystate[256]; |
| 2766 | int scan, left_alt = 0, key_down, shift_state; |
| 2767 | int r, i, code; |
| 2768 | unsigned char *p = output; |
| 2769 | static int alt_sum = 0; |
| 2770 | |
| 2771 | HKL kbd_layout = GetKeyboardLayout(0); |
| 2772 | |
| 2773 | static WORD keys[3]; |
| 2774 | static int compose_char = 0; |
| 2775 | static WPARAM compose_key = 0; |
| 2776 | |
| 2777 | r = GetKeyboardState(keystate); |
| 2778 | if (!r) |
| 2779 | memset(keystate, 0, sizeof(keystate)); |
| 2780 | else { |
| 2781 | #if 0 |
| 2782 | #define SHOW_TOASCII_RESULT |
| 2783 | { /* Tell us all about key events */ |
| 2784 | static BYTE oldstate[256]; |
| 2785 | static int first = 1; |
| 2786 | static int scan; |
| 2787 | int ch; |
| 2788 | if (first) |
| 2789 | memcpy(oldstate, keystate, sizeof(oldstate)); |
| 2790 | first = 0; |
| 2791 | |
| 2792 | if ((HIWORD(lParam) & (KF_UP | KF_REPEAT)) == KF_REPEAT) { |
| 2793 | debug(("+")); |
| 2794 | } else if ((HIWORD(lParam) & KF_UP) |
| 2795 | && scan == (HIWORD(lParam) & 0xFF)) { |
| 2796 | debug((". U")); |
| 2797 | } else { |
| 2798 | debug((".\n")); |
| 2799 | if (wParam >= VK_F1 && wParam <= VK_F20) |
| 2800 | debug(("K_F%d", wParam + 1 - VK_F1)); |
| 2801 | else |
| 2802 | switch (wParam) { |
| 2803 | case VK_SHIFT: |
| 2804 | debug(("SHIFT")); |
| 2805 | break; |
| 2806 | case VK_CONTROL: |
| 2807 | debug(("CTRL")); |
| 2808 | break; |
| 2809 | case VK_MENU: |
| 2810 | debug(("ALT")); |
| 2811 | break; |
| 2812 | default: |
| 2813 | debug(("VK_%02x", wParam)); |
| 2814 | } |
| 2815 | if (message == WM_SYSKEYDOWN || message == WM_SYSKEYUP) |
| 2816 | debug(("*")); |
| 2817 | debug((", S%02x", scan = (HIWORD(lParam) & 0xFF))); |
| 2818 | |
| 2819 | ch = MapVirtualKeyEx(wParam, 2, kbd_layout); |
| 2820 | if (ch >= ' ' && ch <= '~') |
| 2821 | debug((", '%c'", ch)); |
| 2822 | else if (ch) |
| 2823 | debug((", $%02x", ch)); |
| 2824 | |
| 2825 | if (keys[0]) |
| 2826 | debug((", KB0=%02x", keys[0])); |
| 2827 | if (keys[1]) |
| 2828 | debug((", KB1=%02x", keys[1])); |
| 2829 | if (keys[2]) |
| 2830 | debug((", KB2=%02x", keys[2])); |
| 2831 | |
| 2832 | if ((keystate[VK_SHIFT] & 0x80) != 0) |
| 2833 | debug((", S")); |
| 2834 | if ((keystate[VK_CONTROL] & 0x80) != 0) |
| 2835 | debug((", C")); |
| 2836 | if ((HIWORD(lParam) & KF_EXTENDED)) |
| 2837 | debug((", E")); |
| 2838 | if ((HIWORD(lParam) & KF_UP)) |
| 2839 | debug((", U")); |
| 2840 | } |
| 2841 | |
| 2842 | if ((HIWORD(lParam) & (KF_UP | KF_REPEAT)) == KF_REPEAT); |
| 2843 | else if ((HIWORD(lParam) & KF_UP)) |
| 2844 | oldstate[wParam & 0xFF] ^= 0x80; |
| 2845 | else |
| 2846 | oldstate[wParam & 0xFF] ^= 0x81; |
| 2847 | |
| 2848 | for (ch = 0; ch < 256; ch++) |
| 2849 | if (oldstate[ch] != keystate[ch]) |
| 2850 | debug((", M%02x=%02x", ch, keystate[ch])); |
| 2851 | |
| 2852 | memcpy(oldstate, keystate, sizeof(oldstate)); |
| 2853 | } |
| 2854 | #endif |
| 2855 | |
| 2856 | if (wParam == VK_MENU && (HIWORD(lParam) & KF_EXTENDED)) { |
| 2857 | keystate[VK_RMENU] = keystate[VK_MENU]; |
| 2858 | } |
| 2859 | |
| 2860 | |
| 2861 | /* Nastyness with NUMLock - Shift-NUMLock is left alone though */ |
| 2862 | if ((cfg.funky_type == 3 || |
| 2863 | (cfg.funky_type <= 1 && app_keypad_keys && !cfg.no_applic_k)) |
| 2864 | && wParam == VK_NUMLOCK && !(keystate[VK_SHIFT] & 0x80)) { |
| 2865 | |
| 2866 | wParam = VK_EXECUTE; |
| 2867 | |
| 2868 | /* UnToggle NUMLock */ |
| 2869 | if ((HIWORD(lParam) & (KF_UP | KF_REPEAT)) == 0) |
| 2870 | keystate[VK_NUMLOCK] ^= 1; |
| 2871 | } |
| 2872 | |
| 2873 | /* And write back the 'adjusted' state */ |
| 2874 | SetKeyboardState(keystate); |
| 2875 | } |
| 2876 | |
| 2877 | /* Disable Auto repeat if required */ |
| 2878 | if (repeat_off && (HIWORD(lParam) & (KF_UP | KF_REPEAT)) == KF_REPEAT) |
| 2879 | return 0; |
| 2880 | |
| 2881 | if ((HIWORD(lParam) & KF_ALTDOWN) && (keystate[VK_RMENU] & 0x80) == 0) |
| 2882 | left_alt = 1; |
| 2883 | |
| 2884 | key_down = ((HIWORD(lParam) & KF_UP) == 0); |
| 2885 | |
| 2886 | /* Make sure Ctrl-ALT is not the same as AltGr for ToAscii unless told. */ |
| 2887 | if (left_alt && (keystate[VK_CONTROL] & 0x80)) { |
| 2888 | if (cfg.ctrlaltkeys) |
| 2889 | keystate[VK_MENU] = 0; |
| 2890 | else { |
| 2891 | keystate[VK_RMENU] = 0x80; |
| 2892 | left_alt = 0; |
| 2893 | } |
| 2894 | } |
| 2895 | |
| 2896 | alt_pressed = (left_alt && key_down); |
| 2897 | |
| 2898 | scan = (HIWORD(lParam) & (KF_UP | KF_EXTENDED | 0xFF)); |
| 2899 | shift_state = ((keystate[VK_SHIFT] & 0x80) != 0) |
| 2900 | + ((keystate[VK_CONTROL] & 0x80) != 0) * 2; |
| 2901 | |
| 2902 | /* Note if AltGr was pressed and if it was used as a compose key */ |
| 2903 | if (!compose_state) { |
| 2904 | compose_key = 0x100; |
| 2905 | if (cfg.compose_key) { |
| 2906 | if (wParam == VK_MENU && (HIWORD(lParam) & KF_EXTENDED)) |
| 2907 | compose_key = wParam; |
| 2908 | } |
| 2909 | if (wParam == VK_APPS) |
| 2910 | compose_key = wParam; |
| 2911 | } |
| 2912 | |
| 2913 | if (wParam == compose_key) { |
| 2914 | if (compose_state == 0 |
| 2915 | && (HIWORD(lParam) & (KF_UP | KF_REPEAT)) == 0) compose_state = |
| 2916 | 1; |
| 2917 | else if (compose_state == 1 && (HIWORD(lParam) & KF_UP)) |
| 2918 | compose_state = 2; |
| 2919 | else |
| 2920 | compose_state = 0; |
| 2921 | } else if (compose_state == 1 && wParam != VK_CONTROL) |
| 2922 | compose_state = 0; |
| 2923 | |
| 2924 | /* |
| 2925 | * Record that we pressed key so the scroll window can be reset, but |
| 2926 | * be careful to avoid Shift-UP/Down |
| 2927 | */ |
| 2928 | if (wParam != VK_SHIFT && wParam != VK_PRIOR && wParam != VK_NEXT && |
| 2929 | wParam != VK_MENU && wParam != VK_CONTROL) { |
| 2930 | seen_key_event = 1; |
| 2931 | } |
| 2932 | |
| 2933 | if (compose_state > 1 && left_alt) |
| 2934 | compose_state = 0; |
| 2935 | |
| 2936 | /* Sanitize the number pad if not using a PC NumPad */ |
| 2937 | if (left_alt || (app_keypad_keys && !cfg.no_applic_k |
| 2938 | && cfg.funky_type != 2) |
| 2939 | || cfg.funky_type == 3 || cfg.nethack_keypad || compose_state) { |
| 2940 | if ((HIWORD(lParam) & KF_EXTENDED) == 0) { |
| 2941 | int nParam = 0; |
| 2942 | switch (wParam) { |
| 2943 | case VK_INSERT: |
| 2944 | nParam = VK_NUMPAD0; |
| 2945 | break; |
| 2946 | case VK_END: |
| 2947 | nParam = VK_NUMPAD1; |
| 2948 | break; |
| 2949 | case VK_DOWN: |
| 2950 | nParam = VK_NUMPAD2; |
| 2951 | break; |
| 2952 | case VK_NEXT: |
| 2953 | nParam = VK_NUMPAD3; |
| 2954 | break; |
| 2955 | case VK_LEFT: |
| 2956 | nParam = VK_NUMPAD4; |
| 2957 | break; |
| 2958 | case VK_CLEAR: |
| 2959 | nParam = VK_NUMPAD5; |
| 2960 | break; |
| 2961 | case VK_RIGHT: |
| 2962 | nParam = VK_NUMPAD6; |
| 2963 | break; |
| 2964 | case VK_HOME: |
| 2965 | nParam = VK_NUMPAD7; |
| 2966 | break; |
| 2967 | case VK_UP: |
| 2968 | nParam = VK_NUMPAD8; |
| 2969 | break; |
| 2970 | case VK_PRIOR: |
| 2971 | nParam = VK_NUMPAD9; |
| 2972 | break; |
| 2973 | case VK_DELETE: |
| 2974 | nParam = VK_DECIMAL; |
| 2975 | break; |
| 2976 | } |
| 2977 | if (nParam) { |
| 2978 | if (keystate[VK_NUMLOCK] & 1) |
| 2979 | shift_state |= 1; |
| 2980 | wParam = nParam; |
| 2981 | } |
| 2982 | } |
| 2983 | } |
| 2984 | |
| 2985 | /* If a key is pressed and AltGr is not active */ |
| 2986 | if (key_down && (keystate[VK_RMENU] & 0x80) == 0 && !compose_state) { |
| 2987 | /* Okay, prepare for most alts then ... */ |
| 2988 | if (left_alt) |
| 2989 | *p++ = '\033'; |
| 2990 | |
| 2991 | /* Lets see if it's a pattern we know all about ... */ |
| 2992 | if (wParam == VK_PRIOR && shift_state == 1) { |
| 2993 | SendMessage(hwnd, WM_VSCROLL, SB_PAGEUP, 0); |
| 2994 | return 0; |
| 2995 | } |
| 2996 | if (wParam == VK_NEXT && shift_state == 1) { |
| 2997 | SendMessage(hwnd, WM_VSCROLL, SB_PAGEDOWN, 0); |
| 2998 | return 0; |
| 2999 | } |
| 3000 | if (wParam == VK_INSERT && shift_state == 1) { |
| 3001 | term_do_paste(); |
| 3002 | return 0; |
| 3003 | } |
| 3004 | if (left_alt && wParam == VK_F4 && cfg.alt_f4) { |
| 3005 | return -1; |
| 3006 | } |
| 3007 | if (left_alt && wParam == VK_SPACE && cfg.alt_space) { |
| 3008 | SendMessage(hwnd, WM_SYSCOMMAND, SC_KEYMENU, 0); |
| 3009 | return -1; |
| 3010 | } |
| 3011 | if (left_alt && wParam == VK_RETURN && cfg.fullscreenonaltenter && |
| 3012 | (cfg.resize_action != RESIZE_DISABLED)) { |
| 3013 | flip_full_screen(); |
| 3014 | return -1; |
| 3015 | } |
| 3016 | /* Control-Numlock for app-keypad mode switch */ |
| 3017 | if (wParam == VK_PAUSE && shift_state == 2) { |
| 3018 | app_keypad_keys ^= 1; |
| 3019 | return 0; |
| 3020 | } |
| 3021 | |
| 3022 | /* Nethack keypad */ |
| 3023 | if (cfg.nethack_keypad && !left_alt) { |
| 3024 | switch (wParam) { |
| 3025 | case VK_NUMPAD1: |
| 3026 | *p++ = shift_state ? 'B' : 'b'; |
| 3027 | return p - output; |
| 3028 | case VK_NUMPAD2: |
| 3029 | *p++ = shift_state ? 'J' : 'j'; |
| 3030 | return p - output; |
| 3031 | case VK_NUMPAD3: |
| 3032 | *p++ = shift_state ? 'N' : 'n'; |
| 3033 | return p - output; |
| 3034 | case VK_NUMPAD4: |
| 3035 | *p++ = shift_state ? 'H' : 'h'; |
| 3036 | return p - output; |
| 3037 | case VK_NUMPAD5: |
| 3038 | *p++ = shift_state ? '.' : '.'; |
| 3039 | return p - output; |
| 3040 | case VK_NUMPAD6: |
| 3041 | *p++ = shift_state ? 'L' : 'l'; |
| 3042 | return p - output; |
| 3043 | case VK_NUMPAD7: |
| 3044 | *p++ = shift_state ? 'Y' : 'y'; |
| 3045 | return p - output; |
| 3046 | case VK_NUMPAD8: |
| 3047 | *p++ = shift_state ? 'K' : 'k'; |
| 3048 | return p - output; |
| 3049 | case VK_NUMPAD9: |
| 3050 | *p++ = shift_state ? 'U' : 'u'; |
| 3051 | return p - output; |
| 3052 | } |
| 3053 | } |
| 3054 | |
| 3055 | /* Application Keypad */ |
| 3056 | if (!left_alt) { |
| 3057 | int xkey = 0; |
| 3058 | |
| 3059 | if (cfg.funky_type == 3 || |
| 3060 | (cfg.funky_type <= 1 && |
| 3061 | app_keypad_keys && !cfg.no_applic_k)) switch (wParam) { |
| 3062 | case VK_EXECUTE: |
| 3063 | xkey = 'P'; |
| 3064 | break; |
| 3065 | case VK_DIVIDE: |
| 3066 | xkey = 'Q'; |
| 3067 | break; |
| 3068 | case VK_MULTIPLY: |
| 3069 | xkey = 'R'; |
| 3070 | break; |
| 3071 | case VK_SUBTRACT: |
| 3072 | xkey = 'S'; |
| 3073 | break; |
| 3074 | } |
| 3075 | if (app_keypad_keys && !cfg.no_applic_k) |
| 3076 | switch (wParam) { |
| 3077 | case VK_NUMPAD0: |
| 3078 | xkey = 'p'; |
| 3079 | break; |
| 3080 | case VK_NUMPAD1: |
| 3081 | xkey = 'q'; |
| 3082 | break; |
| 3083 | case VK_NUMPAD2: |
| 3084 | xkey = 'r'; |
| 3085 | break; |
| 3086 | case VK_NUMPAD3: |
| 3087 | xkey = 's'; |
| 3088 | break; |
| 3089 | case VK_NUMPAD4: |
| 3090 | xkey = 't'; |
| 3091 | break; |
| 3092 | case VK_NUMPAD5: |
| 3093 | xkey = 'u'; |
| 3094 | break; |
| 3095 | case VK_NUMPAD6: |
| 3096 | xkey = 'v'; |
| 3097 | break; |
| 3098 | case VK_NUMPAD7: |
| 3099 | xkey = 'w'; |
| 3100 | break; |
| 3101 | case VK_NUMPAD8: |
| 3102 | xkey = 'x'; |
| 3103 | break; |
| 3104 | case VK_NUMPAD9: |
| 3105 | xkey = 'y'; |
| 3106 | break; |
| 3107 | |
| 3108 | case VK_DECIMAL: |
| 3109 | xkey = 'n'; |
| 3110 | break; |
| 3111 | case VK_ADD: |
| 3112 | if (cfg.funky_type == 2) { |
| 3113 | if (shift_state) |
| 3114 | xkey = 'l'; |
| 3115 | else |
| 3116 | xkey = 'k'; |
| 3117 | } else if (shift_state) |
| 3118 | xkey = 'm'; |
| 3119 | else |
| 3120 | xkey = 'l'; |
| 3121 | break; |
| 3122 | |
| 3123 | case VK_DIVIDE: |
| 3124 | if (cfg.funky_type == 2) |
| 3125 | xkey = 'o'; |
| 3126 | break; |
| 3127 | case VK_MULTIPLY: |
| 3128 | if (cfg.funky_type == 2) |
| 3129 | xkey = 'j'; |
| 3130 | break; |
| 3131 | case VK_SUBTRACT: |
| 3132 | if (cfg.funky_type == 2) |
| 3133 | xkey = 'm'; |
| 3134 | break; |
| 3135 | |
| 3136 | case VK_RETURN: |
| 3137 | if (HIWORD(lParam) & KF_EXTENDED) |
| 3138 | xkey = 'M'; |
| 3139 | break; |
| 3140 | } |
| 3141 | if (xkey) { |
| 3142 | if (vt52_mode) { |
| 3143 | if (xkey >= 'P' && xkey <= 'S') |
| 3144 | p += sprintf((char *) p, "\x1B%c", xkey); |
| 3145 | else |
| 3146 | p += sprintf((char *) p, "\x1B?%c", xkey); |
| 3147 | } else |
| 3148 | p += sprintf((char *) p, "\x1BO%c", xkey); |
| 3149 | return p - output; |
| 3150 | } |
| 3151 | } |
| 3152 | |
| 3153 | if (wParam == VK_BACK && shift_state == 0) { /* Backspace */ |
| 3154 | *p++ = (cfg.bksp_is_delete ? 0x7F : 0x08); |
| 3155 | *p++ = 0; |
| 3156 | return -2; |
| 3157 | } |
| 3158 | if (wParam == VK_TAB && shift_state == 1) { /* Shift tab */ |
| 3159 | *p++ = 0x1B; |
| 3160 | *p++ = '['; |
| 3161 | *p++ = 'Z'; |
| 3162 | return p - output; |
| 3163 | } |
| 3164 | if (wParam == VK_SPACE && shift_state == 2) { /* Ctrl-Space */ |
| 3165 | *p++ = 0; |
| 3166 | return p - output; |
| 3167 | } |
| 3168 | if (wParam == VK_SPACE && shift_state == 3) { /* Ctrl-Shift-Space */ |
| 3169 | *p++ = 160; |
| 3170 | return p - output; |
| 3171 | } |
| 3172 | if (wParam == VK_CANCEL && shift_state == 2) { /* Ctrl-Break */ |
| 3173 | *p++ = 3; |
| 3174 | *p++ = 0; |
| 3175 | return -2; |
| 3176 | } |
| 3177 | if (wParam == VK_PAUSE) { /* Break/Pause */ |
| 3178 | *p++ = 26; |
| 3179 | *p++ = 0; |
| 3180 | return -2; |
| 3181 | } |
| 3182 | /* Control-2 to Control-8 are special */ |
| 3183 | if (shift_state == 2 && wParam >= '2' && wParam <= '8') { |
| 3184 | *p++ = "\000\033\034\035\036\037\177"[wParam - '2']; |
| 3185 | return p - output; |
| 3186 | } |
| 3187 | if (shift_state == 2 && wParam == 0xBD) { |
| 3188 | *p++ = 0x1F; |
| 3189 | return p - output; |
| 3190 | } |
| 3191 | if (shift_state == 2 && wParam == 0xDF) { |
| 3192 | *p++ = 0x1C; |
| 3193 | return p - output; |
| 3194 | } |
| 3195 | if (shift_state == 0 && wParam == VK_RETURN && cr_lf_return) { |
| 3196 | *p++ = '\r'; |
| 3197 | *p++ = '\n'; |
| 3198 | return p - output; |
| 3199 | } |
| 3200 | |
| 3201 | /* |
| 3202 | * Next, all the keys that do tilde codes. (ESC '[' nn '~', |
| 3203 | * for integer decimal nn.) |
| 3204 | * |
| 3205 | * We also deal with the weird ones here. Linux VCs replace F1 |
| 3206 | * to F5 by ESC [ [ A to ESC [ [ E. rxvt doesn't do _that_, but |
| 3207 | * does replace Home and End (1~ and 4~) by ESC [ H and ESC O w |
| 3208 | * respectively. |
| 3209 | */ |
| 3210 | code = 0; |
| 3211 | switch (wParam) { |
| 3212 | case VK_F1: |
| 3213 | code = (keystate[VK_SHIFT] & 0x80 ? 23 : 11); |
| 3214 | break; |
| 3215 | case VK_F2: |
| 3216 | code = (keystate[VK_SHIFT] & 0x80 ? 24 : 12); |
| 3217 | break; |
| 3218 | case VK_F3: |
| 3219 | code = (keystate[VK_SHIFT] & 0x80 ? 25 : 13); |
| 3220 | break; |
| 3221 | case VK_F4: |
| 3222 | code = (keystate[VK_SHIFT] & 0x80 ? 26 : 14); |
| 3223 | break; |
| 3224 | case VK_F5: |
| 3225 | code = (keystate[VK_SHIFT] & 0x80 ? 28 : 15); |
| 3226 | break; |
| 3227 | case VK_F6: |
| 3228 | code = (keystate[VK_SHIFT] & 0x80 ? 29 : 17); |
| 3229 | break; |
| 3230 | case VK_F7: |
| 3231 | code = (keystate[VK_SHIFT] & 0x80 ? 31 : 18); |
| 3232 | break; |
| 3233 | case VK_F8: |
| 3234 | code = (keystate[VK_SHIFT] & 0x80 ? 32 : 19); |
| 3235 | break; |
| 3236 | case VK_F9: |
| 3237 | code = (keystate[VK_SHIFT] & 0x80 ? 33 : 20); |
| 3238 | break; |
| 3239 | case VK_F10: |
| 3240 | code = (keystate[VK_SHIFT] & 0x80 ? 34 : 21); |
| 3241 | break; |
| 3242 | case VK_F11: |
| 3243 | code = 23; |
| 3244 | break; |
| 3245 | case VK_F12: |
| 3246 | code = 24; |
| 3247 | break; |
| 3248 | case VK_F13: |
| 3249 | code = 25; |
| 3250 | break; |
| 3251 | case VK_F14: |
| 3252 | code = 26; |
| 3253 | break; |
| 3254 | case VK_F15: |
| 3255 | code = 28; |
| 3256 | break; |
| 3257 | case VK_F16: |
| 3258 | code = 29; |
| 3259 | break; |
| 3260 | case VK_F17: |
| 3261 | code = 31; |
| 3262 | break; |
| 3263 | case VK_F18: |
| 3264 | code = 32; |
| 3265 | break; |
| 3266 | case VK_F19: |
| 3267 | code = 33; |
| 3268 | break; |
| 3269 | case VK_F20: |
| 3270 | code = 34; |
| 3271 | break; |
| 3272 | } |
| 3273 | if ((shift_state&2) == 0) switch (wParam) { |
| 3274 | case VK_HOME: |
| 3275 | code = 1; |
| 3276 | break; |
| 3277 | case VK_INSERT: |
| 3278 | code = 2; |
| 3279 | break; |
| 3280 | case VK_DELETE: |
| 3281 | code = 3; |
| 3282 | break; |
| 3283 | case VK_END: |
| 3284 | code = 4; |
| 3285 | break; |
| 3286 | case VK_PRIOR: |
| 3287 | code = 5; |
| 3288 | break; |
| 3289 | case VK_NEXT: |
| 3290 | code = 6; |
| 3291 | break; |
| 3292 | } |
| 3293 | /* Reorder edit keys to physical order */ |
| 3294 | if (cfg.funky_type == 3 && code <= 6) |
| 3295 | code = "\0\2\1\4\5\3\6"[code]; |
| 3296 | |
| 3297 | if (vt52_mode && code > 0 && code <= 6) { |
| 3298 | p += sprintf((char *) p, "\x1B%c", " HLMEIG"[code]); |
| 3299 | return p - output; |
| 3300 | } |
| 3301 | |
| 3302 | if (cfg.funky_type == 5 && /* SCO function keys */ |
| 3303 | code >= 11 && code <= 34) { |
| 3304 | char codes[] = "MNOPQRSTUVWXYZabcdefghijklmnopqrstuvwxyz@[\\]^_`{"; |
| 3305 | int index = 0; |
| 3306 | switch (wParam) { |
| 3307 | case VK_F1: index = 0; break; |
| 3308 | case VK_F2: index = 1; break; |
| 3309 | case VK_F3: index = 2; break; |
| 3310 | case VK_F4: index = 3; break; |
| 3311 | case VK_F5: index = 4; break; |
| 3312 | case VK_F6: index = 5; break; |
| 3313 | case VK_F7: index = 6; break; |
| 3314 | case VK_F8: index = 7; break; |
| 3315 | case VK_F9: index = 8; break; |
| 3316 | case VK_F10: index = 9; break; |
| 3317 | case VK_F11: index = 10; break; |
| 3318 | case VK_F12: index = 11; break; |
| 3319 | } |
| 3320 | if (keystate[VK_SHIFT] & 0x80) index += 12; |
| 3321 | if (keystate[VK_CONTROL] & 0x80) index += 24; |
| 3322 | p += sprintf((char *) p, "\x1B[%c", codes[index]); |
| 3323 | return p - output; |
| 3324 | } |
| 3325 | if (cfg.funky_type == 5 && /* SCO small keypad */ |
| 3326 | code >= 1 && code <= 6) { |
| 3327 | char codes[] = "HL.FIG"; |
| 3328 | if (code == 3) { |
| 3329 | *p++ = '\x7F'; |
| 3330 | } else { |
| 3331 | p += sprintf((char *) p, "\x1B[%c", codes[code-1]); |
| 3332 | } |
| 3333 | return p - output; |
| 3334 | } |
| 3335 | if ((vt52_mode || cfg.funky_type == 4) && code >= 11 && code <= 24) { |
| 3336 | int offt = 0; |
| 3337 | if (code > 15) |
| 3338 | offt++; |
| 3339 | if (code > 21) |
| 3340 | offt++; |
| 3341 | if (vt52_mode) |
| 3342 | p += sprintf((char *) p, "\x1B%c", code + 'P' - 11 - offt); |
| 3343 | else |
| 3344 | p += |
| 3345 | sprintf((char *) p, "\x1BO%c", code + 'P' - 11 - offt); |
| 3346 | return p - output; |
| 3347 | } |
| 3348 | if (cfg.funky_type == 1 && code >= 11 && code <= 15) { |
| 3349 | p += sprintf((char *) p, "\x1B[[%c", code + 'A' - 11); |
| 3350 | return p - output; |
| 3351 | } |
| 3352 | if (cfg.funky_type == 2 && code >= 11 && code <= 14) { |
| 3353 | if (vt52_mode) |
| 3354 | p += sprintf((char *) p, "\x1B%c", code + 'P' - 11); |
| 3355 | else |
| 3356 | p += sprintf((char *) p, "\x1BO%c", code + 'P' - 11); |
| 3357 | return p - output; |
| 3358 | } |
| 3359 | if (cfg.rxvt_homeend && (code == 1 || code == 4)) { |
| 3360 | p += sprintf((char *) p, code == 1 ? "\x1B[H" : "\x1BOw"); |
| 3361 | return p - output; |
| 3362 | } |
| 3363 | if (code) { |
| 3364 | p += sprintf((char *) p, "\x1B[%d~", code); |
| 3365 | return p - output; |
| 3366 | } |
| 3367 | |
| 3368 | /* |
| 3369 | * Now the remaining keys (arrows and Keypad 5. Keypad 5 for |
| 3370 | * some reason seems to send VK_CLEAR to Windows...). |
| 3371 | */ |
| 3372 | { |
| 3373 | char xkey = 0; |
| 3374 | switch (wParam) { |
| 3375 | case VK_UP: |
| 3376 | xkey = 'A'; |
| 3377 | break; |
| 3378 | case VK_DOWN: |
| 3379 | xkey = 'B'; |
| 3380 | break; |
| 3381 | case VK_RIGHT: |
| 3382 | xkey = 'C'; |
| 3383 | break; |
| 3384 | case VK_LEFT: |
| 3385 | xkey = 'D'; |
| 3386 | break; |
| 3387 | case VK_CLEAR: |
| 3388 | xkey = 'G'; |
| 3389 | break; |
| 3390 | } |
| 3391 | if (xkey) { |
| 3392 | if (vt52_mode) |
| 3393 | p += sprintf((char *) p, "\x1B%c", xkey); |
| 3394 | else { |
| 3395 | int app_flg = (app_cursor_keys && !cfg.no_applic_c); |
| 3396 | /* VT100 & VT102 manuals both state the app cursor keys |
| 3397 | * only work if the app keypad is on. |
| 3398 | */ |
| 3399 | if (!app_keypad_keys) |
| 3400 | app_flg = 0; |
| 3401 | /* Useful mapping of Ctrl-arrows */ |
| 3402 | if (shift_state == 2) |
| 3403 | app_flg = !app_flg; |
| 3404 | |
| 3405 | if (app_flg) |
| 3406 | p += sprintf((char *) p, "\x1BO%c", xkey); |
| 3407 | else |
| 3408 | p += sprintf((char *) p, "\x1B[%c", xkey); |
| 3409 | } |
| 3410 | return p - output; |
| 3411 | } |
| 3412 | } |
| 3413 | |
| 3414 | /* |
| 3415 | * Finally, deal with Return ourselves. (Win95 seems to |
| 3416 | * foul it up when Alt is pressed, for some reason.) |
| 3417 | */ |
| 3418 | if (wParam == VK_RETURN) { /* Return */ |
| 3419 | *p++ = 0x0D; |
| 3420 | *p++ = 0; |
| 3421 | return -2; |
| 3422 | } |
| 3423 | |
| 3424 | if (left_alt && wParam >= VK_NUMPAD0 && wParam <= VK_NUMPAD9) |
| 3425 | alt_sum = alt_sum * 10 + wParam - VK_NUMPAD0; |
| 3426 | else |
| 3427 | alt_sum = 0; |
| 3428 | } |
| 3429 | |
| 3430 | /* Okay we've done everything interesting; let windows deal with |
| 3431 | * the boring stuff */ |
| 3432 | { |
| 3433 | BOOL capsOn=0; |
| 3434 | |
| 3435 | /* helg: clear CAPS LOCK state if caps lock switches to cyrillic */ |
| 3436 | if(cfg.xlat_capslockcyr && keystate[VK_CAPITAL] != 0) { |
| 3437 | capsOn= !left_alt; |
| 3438 | keystate[VK_CAPITAL] = 0; |
| 3439 | } |
| 3440 | |
| 3441 | r = ToAsciiEx(wParam, scan, keystate, keys, 0, kbd_layout); |
| 3442 | #ifdef SHOW_TOASCII_RESULT |
| 3443 | if (r == 1 && !key_down) { |
| 3444 | if (alt_sum) { |
| 3445 | if (in_utf || dbcs_screenfont) |
| 3446 | debug((", (U+%04x)", alt_sum)); |
| 3447 | else |
| 3448 | debug((", LCH(%d)", alt_sum)); |
| 3449 | } else { |
| 3450 | debug((", ACH(%d)", keys[0])); |
| 3451 | } |
| 3452 | } else if (r > 0) { |
| 3453 | int r1; |
| 3454 | debug((", ASC(")); |
| 3455 | for (r1 = 0; r1 < r; r1++) { |
| 3456 | debug(("%s%d", r1 ? "," : "", keys[r1])); |
| 3457 | } |
| 3458 | debug((")")); |
| 3459 | } |
| 3460 | #endif |
| 3461 | if (r > 0) { |
| 3462 | WCHAR keybuf; |
| 3463 | |
| 3464 | /* |
| 3465 | * Interrupt an ongoing paste. I'm not sure this is |
| 3466 | * sensible, but for the moment it's preferable to |
| 3467 | * having to faff about buffering things. |
| 3468 | */ |
| 3469 | term_nopaste(); |
| 3470 | |
| 3471 | p = output; |
| 3472 | for (i = 0; i < r; i++) { |
| 3473 | unsigned char ch = (unsigned char) keys[i]; |
| 3474 | |
| 3475 | if (compose_state == 2 && (ch & 0x80) == 0 && ch > ' ') { |
| 3476 | compose_char = ch; |
| 3477 | compose_state++; |
| 3478 | continue; |
| 3479 | } |
| 3480 | if (compose_state == 3 && (ch & 0x80) == 0 && ch > ' ') { |
| 3481 | int nc; |
| 3482 | compose_state = 0; |
| 3483 | |
| 3484 | if ((nc = check_compose(compose_char, ch)) == -1) { |
| 3485 | MessageBeep(MB_ICONHAND); |
| 3486 | return 0; |
| 3487 | } |
| 3488 | keybuf = nc; |
| 3489 | luni_send(&keybuf, 1, 1); |
| 3490 | continue; |
| 3491 | } |
| 3492 | |
| 3493 | compose_state = 0; |
| 3494 | |
| 3495 | if (!key_down) { |
| 3496 | if (alt_sum) { |
| 3497 | if (in_utf || dbcs_screenfont) { |
| 3498 | keybuf = alt_sum; |
| 3499 | luni_send(&keybuf, 1, 1); |
| 3500 | } else { |
| 3501 | ch = (char) alt_sum; |
| 3502 | /* |
| 3503 | * We need not bother about stdin |
| 3504 | * backlogs here, because in GUI PuTTY |
| 3505 | * we can't do anything about it |
| 3506 | * anyway; there's no means of asking |
| 3507 | * Windows to hold off on KEYDOWN |
| 3508 | * messages. We _have_ to buffer |
| 3509 | * everything we're sent. |
| 3510 | */ |
| 3511 | ldisc_send(&ch, 1, 1); |
| 3512 | } |
| 3513 | alt_sum = 0; |
| 3514 | } else |
| 3515 | lpage_send(kbd_codepage, &ch, 1, 1); |
| 3516 | } else { |
| 3517 | if(capsOn && ch < 0x80) { |
| 3518 | WCHAR cbuf[2]; |
| 3519 | cbuf[0] = 27; |
| 3520 | cbuf[1] = xlat_uskbd2cyrllic(ch); |
| 3521 | luni_send(cbuf+!left_alt, 1+!!left_alt, 1); |
| 3522 | } else { |
| 3523 | char cbuf[2]; |
| 3524 | cbuf[0] = '\033'; |
| 3525 | cbuf[1] = ch; |
| 3526 | lpage_send(kbd_codepage, cbuf+!left_alt, 1+!!left_alt, 1); |
| 3527 | } |
| 3528 | } |
| 3529 | show_mouseptr(0); |
| 3530 | } |
| 3531 | |
| 3532 | /* This is so the ALT-Numpad and dead keys work correctly. */ |
| 3533 | keys[0] = 0; |
| 3534 | |
| 3535 | return p - output; |
| 3536 | } |
| 3537 | /* If we're definitly not building up an ALT-54321 then clear it */ |
| 3538 | if (!left_alt) |
| 3539 | keys[0] = 0; |
| 3540 | /* If we will be using alt_sum fix the 256s */ |
| 3541 | else if (keys[0] && (in_utf || dbcs_screenfont)) |
| 3542 | keys[0] = 10; |
| 3543 | } |
| 3544 | |
| 3545 | /* |
| 3546 | * ALT alone may or may not want to bring up the System menu. |
| 3547 | * If it's not meant to, we return 0 on presses or releases of |
| 3548 | * ALT, to show that we've swallowed the keystroke. Otherwise |
| 3549 | * we return -1, which means Windows will give the keystroke |
| 3550 | * its default handling (i.e. bring up the System menu). |
| 3551 | */ |
| 3552 | if (wParam == VK_MENU && !cfg.alt_only) |
| 3553 | return 0; |
| 3554 | |
| 3555 | return -1; |
| 3556 | } |
| 3557 | |
| 3558 | void set_title(char *title) |
| 3559 | { |
| 3560 | sfree(window_name); |
| 3561 | window_name = smalloc(1 + strlen(title)); |
| 3562 | strcpy(window_name, title); |
| 3563 | if (cfg.win_name_always || !IsIconic(hwnd)) |
| 3564 | SetWindowText(hwnd, title); |
| 3565 | } |
| 3566 | |
| 3567 | void set_icon(char *title) |
| 3568 | { |
| 3569 | sfree(icon_name); |
| 3570 | icon_name = smalloc(1 + strlen(title)); |
| 3571 | strcpy(icon_name, title); |
| 3572 | if (!cfg.win_name_always && IsIconic(hwnd)) |
| 3573 | SetWindowText(hwnd, title); |
| 3574 | } |
| 3575 | |
| 3576 | void set_sbar(int total, int start, int page) |
| 3577 | { |
| 3578 | SCROLLINFO si; |
| 3579 | |
| 3580 | if (!cfg.scrollbar) |
| 3581 | return; |
| 3582 | |
| 3583 | si.cbSize = sizeof(si); |
| 3584 | si.fMask = SIF_ALL | SIF_DISABLENOSCROLL; |
| 3585 | si.nMin = 0; |
| 3586 | si.nMax = total - 1; |
| 3587 | si.nPage = page; |
| 3588 | si.nPos = start; |
| 3589 | if (hwnd) |
| 3590 | SetScrollInfo(hwnd, SB_VERT, &si, TRUE); |
| 3591 | } |
| 3592 | |
| 3593 | Context get_ctx(void) |
| 3594 | { |
| 3595 | HDC hdc; |
| 3596 | if (hwnd) { |
| 3597 | hdc = GetDC(hwnd); |
| 3598 | if (hdc && pal) |
| 3599 | SelectPalette(hdc, pal, FALSE); |
| 3600 | return hdc; |
| 3601 | } else |
| 3602 | return NULL; |
| 3603 | } |
| 3604 | |
| 3605 | void free_ctx(Context ctx) |
| 3606 | { |
| 3607 | SelectPalette(ctx, GetStockObject(DEFAULT_PALETTE), FALSE); |
| 3608 | ReleaseDC(hwnd, ctx); |
| 3609 | } |
| 3610 | |
| 3611 | static void real_palette_set(int n, int r, int g, int b) |
| 3612 | { |
| 3613 | if (pal) { |
| 3614 | logpal->palPalEntry[n].peRed = r; |
| 3615 | logpal->palPalEntry[n].peGreen = g; |
| 3616 | logpal->palPalEntry[n].peBlue = b; |
| 3617 | logpal->palPalEntry[n].peFlags = PC_NOCOLLAPSE; |
| 3618 | colours[n] = PALETTERGB(r, g, b); |
| 3619 | SetPaletteEntries(pal, 0, NCOLOURS, logpal->palPalEntry); |
| 3620 | } else |
| 3621 | colours[n] = RGB(r, g, b); |
| 3622 | } |
| 3623 | |
| 3624 | void palette_set(int n, int r, int g, int b) |
| 3625 | { |
| 3626 | static const int first[21] = { |
| 3627 | 0, 2, 4, 6, 8, 10, 12, 14, |
| 3628 | 1, 3, 5, 7, 9, 11, 13, 15, |
| 3629 | 16, 17, 18, 20, 22 |
| 3630 | }; |
| 3631 | real_palette_set(first[n], r, g, b); |
| 3632 | if (first[n] >= 18) |
| 3633 | real_palette_set(first[n] + 1, r, g, b); |
| 3634 | if (pal) { |
| 3635 | HDC hdc = get_ctx(); |
| 3636 | UnrealizeObject(pal); |
| 3637 | RealizePalette(hdc); |
| 3638 | free_ctx(hdc); |
| 3639 | } |
| 3640 | } |
| 3641 | |
| 3642 | void palette_reset(void) |
| 3643 | { |
| 3644 | int i; |
| 3645 | |
| 3646 | for (i = 0; i < NCOLOURS; i++) { |
| 3647 | if (pal) { |
| 3648 | logpal->palPalEntry[i].peRed = defpal[i].rgbtRed; |
| 3649 | logpal->palPalEntry[i].peGreen = defpal[i].rgbtGreen; |
| 3650 | logpal->palPalEntry[i].peBlue = defpal[i].rgbtBlue; |
| 3651 | logpal->palPalEntry[i].peFlags = 0; |
| 3652 | colours[i] = PALETTERGB(defpal[i].rgbtRed, |
| 3653 | defpal[i].rgbtGreen, |
| 3654 | defpal[i].rgbtBlue); |
| 3655 | } else |
| 3656 | colours[i] = RGB(defpal[i].rgbtRed, |
| 3657 | defpal[i].rgbtGreen, defpal[i].rgbtBlue); |
| 3658 | } |
| 3659 | |
| 3660 | if (pal) { |
| 3661 | HDC hdc; |
| 3662 | SetPaletteEntries(pal, 0, NCOLOURS, logpal->palPalEntry); |
| 3663 | hdc = get_ctx(); |
| 3664 | RealizePalette(hdc); |
| 3665 | free_ctx(hdc); |
| 3666 | } |
| 3667 | } |
| 3668 | |
| 3669 | void write_aclip(char *data, int len, int must_deselect) |
| 3670 | { |
| 3671 | HGLOBAL clipdata; |
| 3672 | void *lock; |
| 3673 | |
| 3674 | clipdata = GlobalAlloc(GMEM_DDESHARE | GMEM_MOVEABLE, len + 1); |
| 3675 | if (!clipdata) |
| 3676 | return; |
| 3677 | lock = GlobalLock(clipdata); |
| 3678 | if (!lock) |
| 3679 | return; |
| 3680 | memcpy(lock, data, len); |
| 3681 | ((unsigned char *) lock)[len] = 0; |
| 3682 | GlobalUnlock(clipdata); |
| 3683 | |
| 3684 | if (!must_deselect) |
| 3685 | SendMessage(hwnd, WM_IGNORE_CLIP, TRUE, 0); |
| 3686 | |
| 3687 | if (OpenClipboard(hwnd)) { |
| 3688 | EmptyClipboard(); |
| 3689 | SetClipboardData(CF_TEXT, clipdata); |
| 3690 | CloseClipboard(); |
| 3691 | } else |
| 3692 | GlobalFree(clipdata); |
| 3693 | |
| 3694 | if (!must_deselect) |
| 3695 | SendMessage(hwnd, WM_IGNORE_CLIP, FALSE, 0); |
| 3696 | } |
| 3697 | |
| 3698 | /* |
| 3699 | * Note: unlike write_aclip() this will not append a nul. |
| 3700 | */ |
| 3701 | void write_clip(wchar_t * data, int len, int must_deselect) |
| 3702 | { |
| 3703 | HGLOBAL clipdata, clipdata2, clipdata3; |
| 3704 | int len2; |
| 3705 | void *lock, *lock2, *lock3; |
| 3706 | |
| 3707 | len2 = WideCharToMultiByte(CP_ACP, 0, data, len, 0, 0, NULL, NULL); |
| 3708 | |
| 3709 | clipdata = GlobalAlloc(GMEM_DDESHARE | GMEM_MOVEABLE, |
| 3710 | len * sizeof(wchar_t)); |
| 3711 | clipdata2 = GlobalAlloc(GMEM_DDESHARE | GMEM_MOVEABLE, len2); |
| 3712 | |
| 3713 | if (!clipdata || !clipdata2 || !clipdata3) { |
| 3714 | if (clipdata) |
| 3715 | GlobalFree(clipdata); |
| 3716 | if (clipdata2) |
| 3717 | GlobalFree(clipdata2); |
| 3718 | if (clipdata3) |
| 3719 | GlobalFree(clipdata3); |
| 3720 | return; |
| 3721 | } |
| 3722 | if (!(lock = GlobalLock(clipdata))) |
| 3723 | return; |
| 3724 | if (!(lock2 = GlobalLock(clipdata2))) |
| 3725 | return; |
| 3726 | |
| 3727 | memcpy(lock, data, len * sizeof(wchar_t)); |
| 3728 | WideCharToMultiByte(CP_ACP, 0, data, len, lock2, len2, NULL, NULL); |
| 3729 | |
| 3730 | if (cfg.rtf_paste) { |
| 3731 | wchar_t unitab[256]; |
| 3732 | char *rtf = NULL; |
| 3733 | unsigned char *tdata = (unsigned char *)lock2; |
| 3734 | wchar_t *udata = (wchar_t *)lock; |
| 3735 | int rtflen = 0, uindex = 0, tindex = 0; |
| 3736 | int rtfsize = 0; |
| 3737 | int multilen, blen, alen, totallen, i; |
| 3738 | char before[16], after[4]; |
| 3739 | |
| 3740 | get_unitab(CP_ACP, unitab, 0); |
| 3741 | |
| 3742 | rtfsize = 100 + strlen(cfg.font); |
| 3743 | rtf = smalloc(rtfsize); |
| 3744 | sprintf(rtf, "{\\rtf1\\ansi%d{\\fonttbl\\f0\\fmodern %s;}\\f0", |
| 3745 | GetACP(), cfg.font); |
| 3746 | rtflen = strlen(rtf); |
| 3747 | |
| 3748 | /* |
| 3749 | * We want to construct a piece of RTF that specifies the |
| 3750 | * same Unicode text. To do this we will read back in |
| 3751 | * parallel from the Unicode data in `udata' and the |
| 3752 | * non-Unicode data in `tdata'. For each character in |
| 3753 | * `tdata' which becomes the right thing in `udata' when |
| 3754 | * looked up in `unitab', we just copy straight over from |
| 3755 | * tdata. For each one that doesn't, we must WCToMB it |
| 3756 | * individually and produce a \u escape sequence. |
| 3757 | * |
| 3758 | * It would probably be more robust to just bite the bullet |
| 3759 | * and WCToMB each individual Unicode character one by one, |
| 3760 | * then MBToWC each one back to see if it was an accurate |
| 3761 | * translation; but that strikes me as a horrifying number |
| 3762 | * of Windows API calls so I want to see if this faster way |
| 3763 | * will work. If it screws up badly we can always revert to |
| 3764 | * the simple and slow way. |
| 3765 | */ |
| 3766 | while (tindex < len2 && uindex < len && |
| 3767 | tdata[tindex] && udata[uindex]) { |
| 3768 | if (tindex + 1 < len2 && |
| 3769 | tdata[tindex] == '\r' && |
| 3770 | tdata[tindex+1] == '\n') { |
| 3771 | tindex++; |
| 3772 | uindex++; |
| 3773 | } |
| 3774 | if (unitab[tdata[tindex]] == udata[uindex]) { |
| 3775 | multilen = 1; |
| 3776 | before[0] = '\0'; |
| 3777 | after[0] = '\0'; |
| 3778 | blen = alen = 0; |
| 3779 | } else { |
| 3780 | multilen = WideCharToMultiByte(CP_ACP, 0, unitab+uindex, 1, |
| 3781 | NULL, 0, NULL, NULL); |
| 3782 | if (multilen != 1) { |
| 3783 | blen = sprintf(before, "{\\uc%d\\u%d", multilen, |
| 3784 | udata[uindex]); |
| 3785 | alen = 1; strcpy(after, "}"); |
| 3786 | } else { |
| 3787 | blen = sprintf(before, "\\u%d", udata[uindex]); |
| 3788 | alen = 0; after[0] = '\0'; |
| 3789 | } |
| 3790 | } |
| 3791 | assert(tindex + multilen <= len2); |
| 3792 | totallen = blen + alen; |
| 3793 | for (i = 0; i < multilen; i++) { |
| 3794 | if (tdata[tindex+i] == '\\' || |
| 3795 | tdata[tindex+i] == '{' || |
| 3796 | tdata[tindex+i] == '}') |
| 3797 | totallen += 2; |
| 3798 | else if (tdata[tindex+i] == 0x0D || tdata[tindex+i] == 0x0A) |
| 3799 | totallen += 6; /* \par\r\n */ |
| 3800 | else if (tdata[tindex+i] > 0x7E || tdata[tindex+i] < 0x20) |
| 3801 | totallen += 4; |
| 3802 | else |
| 3803 | totallen++; |
| 3804 | } |
| 3805 | |
| 3806 | if (rtfsize < rtflen + totallen + 3) { |
| 3807 | rtfsize = rtflen + totallen + 512; |
| 3808 | rtf = srealloc(rtf, rtfsize); |
| 3809 | } |
| 3810 | |
| 3811 | strcpy(rtf + rtflen, before); rtflen += blen; |
| 3812 | for (i = 0; i < multilen; i++) { |
| 3813 | if (tdata[tindex+i] == '\\' || |
| 3814 | tdata[tindex+i] == '{' || |
| 3815 | tdata[tindex+i] == '}') { |
| 3816 | rtf[rtflen++] = '\\'; |
| 3817 | rtf[rtflen++] = tdata[tindex+i]; |
| 3818 | } else if (tdata[tindex+i] == 0x0D || tdata[tindex+i] == 0x0A) { |
| 3819 | rtflen += sprintf(rtf+rtflen, "\\par\r\n"); |
| 3820 | } else if (tdata[tindex+i] > 0x7E || tdata[tindex+i] < 0x20) { |
| 3821 | rtflen += sprintf(rtf+rtflen, "\\'%02x", tdata[tindex+i]); |
| 3822 | } else { |
| 3823 | rtf[rtflen++] = tdata[tindex+i]; |
| 3824 | } |
| 3825 | } |
| 3826 | strcpy(rtf + rtflen, after); rtflen += alen; |
| 3827 | |
| 3828 | tindex += multilen; |
| 3829 | uindex++; |
| 3830 | } |
| 3831 | |
| 3832 | strcpy(rtf + rtflen, "}"); |
| 3833 | rtflen += 2; |
| 3834 | |
| 3835 | clipdata3 = GlobalAlloc(GMEM_DDESHARE | GMEM_MOVEABLE, rtflen); |
| 3836 | if (clipdata3 && (lock3 = GlobalLock(clipdata3)) != NULL) { |
| 3837 | strcpy(lock3, rtf); |
| 3838 | GlobalUnlock(clipdata3); |
| 3839 | } |
| 3840 | sfree(rtf); |
| 3841 | } else |
| 3842 | clipdata3 = NULL; |
| 3843 | |
| 3844 | GlobalUnlock(clipdata); |
| 3845 | GlobalUnlock(clipdata2); |
| 3846 | |
| 3847 | if (!must_deselect) |
| 3848 | SendMessage(hwnd, WM_IGNORE_CLIP, TRUE, 0); |
| 3849 | |
| 3850 | if (OpenClipboard(hwnd)) { |
| 3851 | EmptyClipboard(); |
| 3852 | SetClipboardData(CF_UNICODETEXT, clipdata); |
| 3853 | SetClipboardData(CF_TEXT, clipdata2); |
| 3854 | if (clipdata3) |
| 3855 | SetClipboardData(RegisterClipboardFormat(CF_RTF), clipdata3); |
| 3856 | CloseClipboard(); |
| 3857 | } else { |
| 3858 | GlobalFree(clipdata); |
| 3859 | GlobalFree(clipdata2); |
| 3860 | } |
| 3861 | |
| 3862 | if (!must_deselect) |
| 3863 | SendMessage(hwnd, WM_IGNORE_CLIP, FALSE, 0); |
| 3864 | } |
| 3865 | |
| 3866 | void get_clip(wchar_t ** p, int *len) |
| 3867 | { |
| 3868 | static HGLOBAL clipdata = NULL; |
| 3869 | static wchar_t *converted = 0; |
| 3870 | wchar_t *p2; |
| 3871 | |
| 3872 | if (converted) { |
| 3873 | sfree(converted); |
| 3874 | converted = 0; |
| 3875 | } |
| 3876 | if (!p) { |
| 3877 | if (clipdata) |
| 3878 | GlobalUnlock(clipdata); |
| 3879 | clipdata = NULL; |
| 3880 | return; |
| 3881 | } else if (OpenClipboard(NULL)) { |
| 3882 | if ((clipdata = GetClipboardData(CF_UNICODETEXT))) { |
| 3883 | CloseClipboard(); |
| 3884 | *p = GlobalLock(clipdata); |
| 3885 | if (*p) { |
| 3886 | for (p2 = *p; *p2; p2++); |
| 3887 | *len = p2 - *p; |
| 3888 | return; |
| 3889 | } |
| 3890 | } else if ( (clipdata = GetClipboardData(CF_TEXT)) ) { |
| 3891 | char *s; |
| 3892 | int i; |
| 3893 | CloseClipboard(); |
| 3894 | s = GlobalLock(clipdata); |
| 3895 | i = MultiByteToWideChar(CP_ACP, 0, s, strlen(s) + 1, 0, 0); |
| 3896 | *p = converted = smalloc(i * sizeof(wchar_t)); |
| 3897 | MultiByteToWideChar(CP_ACP, 0, s, strlen(s) + 1, converted, i); |
| 3898 | *len = i - 1; |
| 3899 | return; |
| 3900 | } else |
| 3901 | CloseClipboard(); |
| 3902 | } |
| 3903 | |
| 3904 | *p = NULL; |
| 3905 | *len = 0; |
| 3906 | } |
| 3907 | |
| 3908 | #if 0 |
| 3909 | /* |
| 3910 | * Move `lines' lines from position `from' to position `to' in the |
| 3911 | * window. |
| 3912 | */ |
| 3913 | void optimised_move(int to, int from, int lines) |
| 3914 | { |
| 3915 | RECT r; |
| 3916 | int min, max; |
| 3917 | |
| 3918 | min = (to < from ? to : from); |
| 3919 | max = to + from - min; |
| 3920 | |
| 3921 | r.left = offset_width; |
| 3922 | r.right = offset_width + cols * font_width; |
| 3923 | r.top = offset_height + min * font_height; |
| 3924 | r.bottom = offset_height + (max + lines) * font_height; |
| 3925 | ScrollWindow(hwnd, 0, (to - from) * font_height, &r, &r); |
| 3926 | } |
| 3927 | #endif |
| 3928 | |
| 3929 | /* |
| 3930 | * Print a message box and perform a fatal exit. |
| 3931 | */ |
| 3932 | void fatalbox(char *fmt, ...) |
| 3933 | { |
| 3934 | va_list ap; |
| 3935 | char stuff[200]; |
| 3936 | |
| 3937 | va_start(ap, fmt); |
| 3938 | vsprintf(stuff, fmt, ap); |
| 3939 | va_end(ap); |
| 3940 | MessageBox(hwnd, stuff, "PuTTY Fatal Error", MB_ICONERROR | MB_OK); |
| 3941 | exit(1); |
| 3942 | } |
| 3943 | |
| 3944 | /* |
| 3945 | * Manage window caption / taskbar flashing, if enabled. |
| 3946 | * 0 = stop, 1 = maintain, 2 = start |
| 3947 | */ |
| 3948 | static void flash_window(int mode) |
| 3949 | { |
| 3950 | static long last_flash = 0; |
| 3951 | static int flashing = 0; |
| 3952 | if ((mode == 0) || (cfg.beep_ind == B_IND_DISABLED)) { |
| 3953 | /* stop */ |
| 3954 | if (flashing) { |
| 3955 | FlashWindow(hwnd, FALSE); |
| 3956 | flashing = 0; |
| 3957 | } |
| 3958 | |
| 3959 | } else if (mode == 2) { |
| 3960 | /* start */ |
| 3961 | if (!flashing) { |
| 3962 | last_flash = GetTickCount(); |
| 3963 | flashing = 1; |
| 3964 | FlashWindow(hwnd, TRUE); |
| 3965 | } |
| 3966 | |
| 3967 | } else if ((mode == 1) && (cfg.beep_ind == B_IND_FLASH)) { |
| 3968 | /* maintain */ |
| 3969 | if (flashing) { |
| 3970 | long now = GetTickCount(); |
| 3971 | long fdiff = now - last_flash; |
| 3972 | if (fdiff < 0 || fdiff > 450) { |
| 3973 | last_flash = now; |
| 3974 | FlashWindow(hwnd, TRUE); /* toggle */ |
| 3975 | } |
| 3976 | } |
| 3977 | } |
| 3978 | } |
| 3979 | |
| 3980 | /* |
| 3981 | * Beep. |
| 3982 | */ |
| 3983 | void beep(int mode) |
| 3984 | { |
| 3985 | if (mode == BELL_DEFAULT) { |
| 3986 | /* |
| 3987 | * For MessageBeep style bells, we want to be careful of |
| 3988 | * timing, because they don't have the nice property of |
| 3989 | * PlaySound bells that each one cancels the previous |
| 3990 | * active one. So we limit the rate to one per 50ms or so. |
| 3991 | */ |
| 3992 | static long lastbeep = 0; |
| 3993 | long beepdiff; |
| 3994 | |
| 3995 | beepdiff = GetTickCount() - lastbeep; |
| 3996 | if (beepdiff >= 0 && beepdiff < 50) |
| 3997 | return; |
| 3998 | MessageBeep(MB_OK); |
| 3999 | /* |
| 4000 | * The above MessageBeep call takes time, so we record the |
| 4001 | * time _after_ it finishes rather than before it starts. |
| 4002 | */ |
| 4003 | lastbeep = GetTickCount(); |
| 4004 | } else if (mode == BELL_WAVEFILE) { |
| 4005 | if (!PlaySound(cfg.bell_wavefile, NULL, SND_ASYNC | SND_FILENAME)) { |
| 4006 | char buf[sizeof(cfg.bell_wavefile) + 80]; |
| 4007 | sprintf(buf, "Unable to play sound file\n%s\n" |
| 4008 | "Using default sound instead", cfg.bell_wavefile); |
| 4009 | MessageBox(hwnd, buf, "PuTTY Sound Error", |
| 4010 | MB_OK | MB_ICONEXCLAMATION); |
| 4011 | cfg.beep = BELL_DEFAULT; |
| 4012 | } |
| 4013 | } |
| 4014 | /* Otherwise, either visual bell or disabled; do nothing here */ |
| 4015 | if (!has_focus) { |
| 4016 | flash_window(2); /* start */ |
| 4017 | } |
| 4018 | } |
| 4019 | |
| 4020 | /* |
| 4021 | * Toggle full screen mode. Thanks to cwis@nerim.fr for the |
| 4022 | * implementation. |
| 4023 | * Revised by <wez@thebrainroom.com> |
| 4024 | */ |
| 4025 | static void flip_full_screen(void) |
| 4026 | { |
| 4027 | WINDOWPLACEMENT wp; |
| 4028 | LONG style; |
| 4029 | |
| 4030 | wp.length = sizeof(wp); |
| 4031 | GetWindowPlacement(hwnd, &wp); |
| 4032 | |
| 4033 | full_screen = !full_screen; |
| 4034 | |
| 4035 | if (full_screen) { |
| 4036 | if (wp.showCmd == SW_SHOWMAXIMIZED) { |
| 4037 | /* Ooops it was already 'zoomed' we have to unzoom it before |
| 4038 | * everything will work right. |
| 4039 | */ |
| 4040 | wp.showCmd = SW_SHOWNORMAL; |
| 4041 | SetWindowPlacement(hwnd, &wp); |
| 4042 | } |
| 4043 | |
| 4044 | style = GetWindowLong(hwnd, GWL_STYLE) & ~WS_CAPTION; |
| 4045 | style &= ~WS_VSCROLL; |
| 4046 | if (cfg.scrollbar_in_fullscreen) |
| 4047 | style |= WS_VSCROLL; |
| 4048 | SetWindowLong(hwnd, GWL_STYLE, style); |
| 4049 | |
| 4050 | /* This seems to be needed otherwize explorer doesn't notice |
| 4051 | * we want to go fullscreen and it's bar is still visible |
| 4052 | */ |
| 4053 | SetWindowPos(hwnd, NULL, 0, 0, 0, 0, |
| 4054 | SWP_NOACTIVATE | SWP_NOCOPYBITS | |
| 4055 | SWP_NOMOVE | SWP_NOSIZE | SWP_NOZORDER | |
| 4056 | SWP_FRAMECHANGED); |
| 4057 | |
| 4058 | wp.showCmd = SW_SHOWMAXIMIZED; |
| 4059 | SetWindowPlacement(hwnd, &wp); |
| 4060 | } else { |
| 4061 | style = GetWindowLong(hwnd, GWL_STYLE) | WS_CAPTION; |
| 4062 | style &= ~WS_VSCROLL; |
| 4063 | if (cfg.scrollbar) |
| 4064 | style |= WS_VSCROLL; |
| 4065 | SetWindowLong(hwnd, GWL_STYLE, style); |
| 4066 | |
| 4067 | /* Don't need to do a SetWindowPos as the resize will force a |
| 4068 | * full redraw. |
| 4069 | */ |
| 4070 | wp.showCmd = SW_SHOWNORMAL; |
| 4071 | SetWindowPlacement(hwnd, &wp); |
| 4072 | } |
| 4073 | |
| 4074 | CheckMenuItem(GetSystemMenu(hwnd, FALSE), IDM_FULLSCREEN, |
| 4075 | MF_BYCOMMAND| full_screen ? MF_CHECKED : MF_UNCHECKED); |
| 4076 | } |