| 1 | #include <stdio.h> |
| 2 | #include <stdlib.h> |
| 3 | #include <ctype.h> |
| 4 | |
| 5 | #include <time.h> |
| 6 | #include <assert.h> |
| 7 | |
| 8 | #include "putty.h" |
| 9 | |
| 10 | /* log session to file stuff ... */ |
| 11 | struct LogContext { |
| 12 | FILE *lgfp; |
| 13 | enum { L_CLOSED, L_OPENING, L_OPEN, L_ERROR } state; |
| 14 | bufchain queue; |
| 15 | Filename currlogfilename; |
| 16 | void *frontend; |
| 17 | Config cfg; |
| 18 | }; |
| 19 | |
| 20 | static void xlatlognam(Filename *d, Filename s, char *hostname, struct tm *tm); |
| 21 | |
| 22 | /* |
| 23 | * Internal wrapper function which must be called for _all_ output |
| 24 | * to the log file. It takes care of opening the log file if it |
| 25 | * isn't open, buffering data if it's in the process of being |
| 26 | * opened asynchronously, etc. |
| 27 | */ |
| 28 | static void logwrite(struct LogContext *ctx, void *data, int len) |
| 29 | { |
| 30 | /* |
| 31 | * In state L_CLOSED, we call logfopen, which will set the state |
| 32 | * to one of L_OPENING, L_OPEN or L_ERROR. Hence we process all of |
| 33 | * those three _after_ processing L_CLOSED. |
| 34 | */ |
| 35 | if (ctx->state == L_CLOSED) |
| 36 | logfopen(ctx); |
| 37 | |
| 38 | if (ctx->state == L_OPENING) { |
| 39 | bufchain_add(&ctx->queue, data, len); |
| 40 | } else if (ctx->state == L_OPEN) { |
| 41 | assert(ctx->lgfp); |
| 42 | fwrite(data, 1, len, ctx->lgfp); |
| 43 | } /* else L_ERROR, so ignore the write */ |
| 44 | } |
| 45 | |
| 46 | /* |
| 47 | * Convenience wrapper on logwrite() which printf-formats the |
| 48 | * string. |
| 49 | */ |
| 50 | static void logprintf(struct LogContext *ctx, const char *fmt, ...) |
| 51 | { |
| 52 | va_list ap; |
| 53 | char *data; |
| 54 | |
| 55 | va_start(ap, fmt); |
| 56 | data = dupvprintf(fmt, ap); |
| 57 | va_end(ap); |
| 58 | |
| 59 | logwrite(ctx, data, strlen(data)); |
| 60 | sfree(data); |
| 61 | } |
| 62 | |
| 63 | /* |
| 64 | * Flush any open log file. |
| 65 | */ |
| 66 | void logflush(void *handle) { |
| 67 | struct LogContext *ctx = (struct LogContext *)handle; |
| 68 | if (ctx->cfg.logtype > 0) |
| 69 | if (ctx->state == L_OPEN) |
| 70 | fflush(ctx->lgfp); |
| 71 | } |
| 72 | |
| 73 | static void logfopen_callback(void *handle, int mode) |
| 74 | { |
| 75 | struct LogContext *ctx = (struct LogContext *)handle; |
| 76 | char buf[256], *event; |
| 77 | struct tm tm; |
| 78 | const char *fmode; |
| 79 | |
| 80 | if (mode == 0) { |
| 81 | ctx->state = L_ERROR; /* disable logging */ |
| 82 | } else { |
| 83 | fmode = (mode == 1 ? "ab" : "wb"); |
| 84 | ctx->lgfp = f_open(ctx->currlogfilename, fmode); |
| 85 | if (ctx->lgfp) |
| 86 | ctx->state = L_OPEN; |
| 87 | else |
| 88 | ctx->state = L_ERROR; |
| 89 | } |
| 90 | |
| 91 | if (ctx->state == L_OPEN) { |
| 92 | /* Write header line into log file. */ |
| 93 | tm = ltime(); |
| 94 | strftime(buf, 24, "%Y.%m.%d %H:%M:%S", &tm); |
| 95 | logprintf(ctx, "=~=~=~=~=~=~=~=~=~=~=~= PuTTY log %s" |
| 96 | " =~=~=~=~=~=~=~=~=~=~=~=\r\n", buf); |
| 97 | } |
| 98 | |
| 99 | event = dupprintf("%s session log (%s mode) to file: %s", |
| 100 | (mode == 0 ? "Disabled writing" : |
| 101 | mode == 1 ? "Appending" : "Writing new"), |
| 102 | (ctx->cfg.logtype == LGTYP_ASCII ? "ASCII" : |
| 103 | ctx->cfg.logtype == LGTYP_DEBUG ? "raw" : |
| 104 | ctx->cfg.logtype == LGTYP_PACKETS ? "SSH packets" : |
| 105 | "unknown"), |
| 106 | filename_to_str(&ctx->currlogfilename)); |
| 107 | logevent(ctx->frontend, event); |
| 108 | sfree(event); |
| 109 | |
| 110 | /* |
| 111 | * Having either succeeded or failed in opening the log file, |
| 112 | * we should write any queued data out. |
| 113 | */ |
| 114 | assert(ctx->state != L_OPENING); /* make _sure_ it won't be requeued */ |
| 115 | while (bufchain_size(&ctx->queue)) { |
| 116 | void *data; |
| 117 | int len; |
| 118 | bufchain_prefix(&ctx->queue, &data, &len); |
| 119 | logwrite(ctx, data, len); |
| 120 | bufchain_consume(&ctx->queue, len); |
| 121 | } |
| 122 | } |
| 123 | |
| 124 | /* |
| 125 | * Open the log file. Takes care of detecting an already-existing |
| 126 | * file and asking the user whether they want to append, overwrite |
| 127 | * or cancel logging. |
| 128 | */ |
| 129 | void logfopen(void *handle) |
| 130 | { |
| 131 | struct LogContext *ctx = (struct LogContext *)handle; |
| 132 | struct tm tm; |
| 133 | int mode; |
| 134 | |
| 135 | /* Prevent repeat calls */ |
| 136 | if (ctx->state != L_CLOSED) |
| 137 | return; |
| 138 | |
| 139 | if (!ctx->cfg.logtype) |
| 140 | return; |
| 141 | |
| 142 | tm = ltime(); |
| 143 | |
| 144 | /* substitute special codes in file name */ |
| 145 | xlatlognam(&ctx->currlogfilename, ctx->cfg.logfilename,ctx->cfg.host, &tm); |
| 146 | |
| 147 | ctx->lgfp = f_open(ctx->currlogfilename, "r"); /* file already present? */ |
| 148 | if (ctx->lgfp) { |
| 149 | fclose(ctx->lgfp); |
| 150 | if (ctx->cfg.logxfovr != LGXF_ASK) { |
| 151 | mode = ((ctx->cfg.logxfovr == LGXF_OVR) ? 2 : 1); |
| 152 | } else |
| 153 | mode = askappend(ctx->frontend, ctx->currlogfilename, |
| 154 | logfopen_callback, ctx); |
| 155 | } else |
| 156 | mode = 2; /* create == overwrite */ |
| 157 | |
| 158 | if (mode < 0) |
| 159 | ctx->state = L_OPENING; |
| 160 | else |
| 161 | logfopen_callback(ctx, mode); /* open the file */ |
| 162 | } |
| 163 | |
| 164 | void logfclose(void *handle) |
| 165 | { |
| 166 | struct LogContext *ctx = (struct LogContext *)handle; |
| 167 | if (ctx->lgfp) { |
| 168 | fclose(ctx->lgfp); |
| 169 | ctx->lgfp = NULL; |
| 170 | } |
| 171 | ctx->state = L_CLOSED; |
| 172 | } |
| 173 | |
| 174 | /* |
| 175 | * Log session traffic. |
| 176 | */ |
| 177 | void logtraffic(void *handle, unsigned char c, int logmode) |
| 178 | { |
| 179 | struct LogContext *ctx = (struct LogContext *)handle; |
| 180 | if (ctx->cfg.logtype > 0) { |
| 181 | if (ctx->cfg.logtype == logmode) |
| 182 | logwrite(ctx, &c, 1); |
| 183 | } |
| 184 | } |
| 185 | |
| 186 | /* |
| 187 | * Log an Event Log entry. Used in SSH packet logging mode; this is |
| 188 | * also as convenient a place as any to put the output of Event Log |
| 189 | * entries to stderr when a command-line tool is in verbose mode. |
| 190 | * (In particular, this is a better place to put it than in the |
| 191 | * front ends, because it only has to be done once for all |
| 192 | * platforms. Platforms which don't have a meaningful stderr can |
| 193 | * just avoid defining FLAG_STDERR. |
| 194 | */ |
| 195 | void log_eventlog(void *handle, const char *event) |
| 196 | { |
| 197 | struct LogContext *ctx = (struct LogContext *)handle; |
| 198 | if ((flags & FLAG_STDERR) && (flags & FLAG_VERBOSE)) { |
| 199 | fprintf(stderr, "%s\n", event); |
| 200 | fflush(stderr); |
| 201 | } |
| 202 | if (ctx->cfg.logtype != LGTYP_PACKETS) |
| 203 | return; |
| 204 | logprintf(ctx, "Event Log: %s\r\n", event); |
| 205 | } |
| 206 | |
| 207 | /* |
| 208 | * Log an SSH packet. |
| 209 | * If n_blanks != 0, blank or omit some parts. |
| 210 | * Set of blanking areas must be in increasing order. |
| 211 | */ |
| 212 | void log_packet(void *handle, int direction, int type, |
| 213 | char *texttype, void *data, int len, |
| 214 | int n_blanks, const struct logblank_t *blanks) |
| 215 | { |
| 216 | struct LogContext *ctx = (struct LogContext *)handle; |
| 217 | char dumpdata[80], smalldata[5]; |
| 218 | int p = 0, b = 0, omitted = 0; |
| 219 | int output_pos = 0; /* NZ if pending output in dumpdata */ |
| 220 | |
| 221 | if (ctx->cfg.logtype != LGTYP_PACKETS) |
| 222 | return; |
| 223 | |
| 224 | /* Packet header. */ |
| 225 | logprintf(ctx, "%s packet type %d / 0x%02x (%s)\r\n", |
| 226 | direction == PKT_INCOMING ? "Incoming" : "Outgoing", |
| 227 | type, type, texttype); |
| 228 | |
| 229 | /* |
| 230 | * Output a hex/ASCII dump of the packet body, blanking/omitting |
| 231 | * parts as specified. |
| 232 | */ |
| 233 | while (p < len) { |
| 234 | int blktype; |
| 235 | |
| 236 | /* Move to a current entry in the blanking array. */ |
| 237 | while ((b < n_blanks) && |
| 238 | (p >= blanks[b].offset + blanks[b].len)) |
| 239 | b++; |
| 240 | /* Work out what type of blanking to apply to |
| 241 | * this byte. */ |
| 242 | blktype = PKTLOG_EMIT; /* default */ |
| 243 | if ((b < n_blanks) && |
| 244 | (p >= blanks[b].offset) && |
| 245 | (p < blanks[b].offset + blanks[b].len)) |
| 246 | blktype = blanks[b].type; |
| 247 | |
| 248 | /* If we're about to stop omitting, it's time to say how |
| 249 | * much we omitted. */ |
| 250 | if ((blktype != PKTLOG_OMIT) && omitted) { |
| 251 | logprintf(ctx, " (%d byte%s omitted)\r\n", |
| 252 | omitted, (omitted==1?"":"s")); |
| 253 | omitted = 0; |
| 254 | } |
| 255 | |
| 256 | /* (Re-)initialise dumpdata as necessary |
| 257 | * (start of row, or if we've just stopped omitting) */ |
| 258 | if (!output_pos && !omitted) |
| 259 | sprintf(dumpdata, " %08x%*s\r\n", p-(p%16), 1+3*16+2+16, ""); |
| 260 | |
| 261 | /* Deal with the current byte. */ |
| 262 | if (blktype == PKTLOG_OMIT) { |
| 263 | omitted++; |
| 264 | } else { |
| 265 | int c; |
| 266 | if (blktype == PKTLOG_BLANK) { |
| 267 | c = 'X'; |
| 268 | sprintf(smalldata, "XX"); |
| 269 | } else { /* PKTLOG_EMIT */ |
| 270 | c = ((unsigned char *)data)[p]; |
| 271 | sprintf(smalldata, "%02x", c); |
| 272 | } |
| 273 | dumpdata[10+2+3*(p%16)] = smalldata[0]; |
| 274 | dumpdata[10+2+3*(p%16)+1] = smalldata[1]; |
| 275 | dumpdata[10+1+3*16+2+(p%16)] = (isprint(c) ? c : '.'); |
| 276 | output_pos = (p%16) + 1; |
| 277 | } |
| 278 | |
| 279 | p++; |
| 280 | |
| 281 | /* Flush row if necessary */ |
| 282 | if (((p % 16) == 0) || (p == len) || omitted) { |
| 283 | if (output_pos) { |
| 284 | strcpy(dumpdata + 10+1+3*16+2+output_pos, "\r\n"); |
| 285 | logwrite(ctx, dumpdata, strlen(dumpdata)); |
| 286 | output_pos = 0; |
| 287 | } |
| 288 | } |
| 289 | |
| 290 | } |
| 291 | |
| 292 | /* Tidy up */ |
| 293 | if (omitted) |
| 294 | logprintf(ctx, " (%d byte%s omitted)\r\n", |
| 295 | omitted, (omitted==1?"":"s")); |
| 296 | logflush(ctx); |
| 297 | } |
| 298 | |
| 299 | void *log_init(void *frontend, Config *cfg) |
| 300 | { |
| 301 | struct LogContext *ctx = snew(struct LogContext); |
| 302 | ctx->lgfp = NULL; |
| 303 | ctx->state = L_CLOSED; |
| 304 | ctx->frontend = frontend; |
| 305 | ctx->cfg = *cfg; /* STRUCTURE COPY */ |
| 306 | bufchain_init(&ctx->queue); |
| 307 | return ctx; |
| 308 | } |
| 309 | |
| 310 | void log_free(void *handle) |
| 311 | { |
| 312 | struct LogContext *ctx = (struct LogContext *)handle; |
| 313 | |
| 314 | logfclose(ctx); |
| 315 | bufchain_clear(&ctx->queue); |
| 316 | sfree(ctx); |
| 317 | } |
| 318 | |
| 319 | void log_reconfig(void *handle, Config *cfg) |
| 320 | { |
| 321 | struct LogContext *ctx = (struct LogContext *)handle; |
| 322 | int reset_logging; |
| 323 | |
| 324 | if (!filename_equal(ctx->cfg.logfilename, cfg->logfilename) || |
| 325 | ctx->cfg.logtype != cfg->logtype) |
| 326 | reset_logging = TRUE; |
| 327 | else |
| 328 | reset_logging = FALSE; |
| 329 | |
| 330 | if (reset_logging) |
| 331 | logfclose(ctx); |
| 332 | |
| 333 | ctx->cfg = *cfg; /* STRUCTURE COPY */ |
| 334 | |
| 335 | if (reset_logging) |
| 336 | logfopen(ctx); |
| 337 | } |
| 338 | |
| 339 | /* |
| 340 | * translate format codes into time/date strings |
| 341 | * and insert them into log file name |
| 342 | * |
| 343 | * "&Y":YYYY "&m":MM "&d":DD "&T":hhmm "&h":<hostname> "&&":& |
| 344 | */ |
| 345 | static void xlatlognam(Filename *dest, Filename src, |
| 346 | char *hostname, struct tm *tm) { |
| 347 | char buf[10], *bufp; |
| 348 | int size; |
| 349 | char buffer[FILENAME_MAX]; |
| 350 | int len = sizeof(buffer)-1; |
| 351 | char *d; |
| 352 | const char *s; |
| 353 | |
| 354 | d = buffer; |
| 355 | s = filename_to_str(&src); |
| 356 | |
| 357 | while (*s) { |
| 358 | /* Let (bufp, len) be the string to append. */ |
| 359 | bufp = buf; /* don't usually override this */ |
| 360 | if (*s == '&') { |
| 361 | char c; |
| 362 | s++; |
| 363 | size = 0; |
| 364 | if (*s) switch (c = *s++, tolower(c)) { |
| 365 | case 'y': |
| 366 | size = strftime(buf, sizeof(buf), "%Y", tm); |
| 367 | break; |
| 368 | case 'm': |
| 369 | size = strftime(buf, sizeof(buf), "%m", tm); |
| 370 | break; |
| 371 | case 'd': |
| 372 | size = strftime(buf, sizeof(buf), "%d", tm); |
| 373 | break; |
| 374 | case 't': |
| 375 | size = strftime(buf, sizeof(buf), "%H%M%S", tm); |
| 376 | break; |
| 377 | case 'h': |
| 378 | bufp = hostname; |
| 379 | size = strlen(bufp); |
| 380 | break; |
| 381 | default: |
| 382 | buf[0] = '&'; |
| 383 | size = 1; |
| 384 | if (c != '&') |
| 385 | buf[size++] = c; |
| 386 | } |
| 387 | } else { |
| 388 | buf[0] = *s++; |
| 389 | size = 1; |
| 390 | } |
| 391 | if (size > len) |
| 392 | size = len; |
| 393 | memcpy(d, bufp, size); |
| 394 | d += size; |
| 395 | len -= size; |
| 396 | } |
| 397 | *d = '\0'; |
| 398 | |
| 399 | *dest = filename_from_str(buffer); |
| 400 | } |