Documentation: filled the last few gaps and cleaned a few things up.

[u/mdw/putty] / doc / gs.but

\versionid $Id: gs.but,v 1.6 2001/12/06 20:05:39 simon Exp $

\C{gs} Getting started with PuTTY

This chapter gives a quick guide to the simplest types of
interactive login session using PuTTY.

\H{gs-insecure} Starting a session

When you start PuTTY, you will see a dialog box. This dialog box
allows you to control everything PuTTY can do. See \k{config} for
details of all the things you can control.

You don't usually need to change most of the configuration options.
To start the simplest kind of session, all you need to do is to
enter a few basic parameters.

In the \q{Host Name} box, enter the Internet host name of the server
you want to connect to. You should have been told this by the
provider of your login account.

Now select a login protocol to use, from the \q{Protocol} buttons.
For a login session, you should select Telnet, Rlogin or SSH. See
\k{which-one} for a description of the differences between the three
protocols, and advice on which one to use. The fourth protocol,
\e{Raw}, is not used for interactive login sessions; you would
usually use this for debugging other Internet services.

When you change the selected protocol, the number in the \q{Port}
box will change. This is normal: it happens because the various
login services are usually provided on different network ports by
the server machine. Most servers will use the standard port numbers,
so you will not need to change the port setting. If your server
provides login services on a non-standard port, your system
administrator should have told you which one. (For example, many
MUDs run Telnet service on a port other than 23.)

Once you have filled in the \q{Host Name}, \q{Protocol}, and
possibly \q{Port} settings, you are ready to connect. Press the
\q{Open} button at the bottom of the dialog box, and PuTTY will
begin trying to connect you to the server.

\H{gs-hostkey} Verifying the Host Key (SSH only)

If you are not using the SSH protocol, you can skip this section.

If you are using SSH to connect to a server for the first time, you
will probably see a message looking something like this:

\c The server's host key is not cached in the registry. You
\c have no guarantee that the server is the computer you
\c think it is.
\c The server's key fingerprint is:
\c ssh-rsa 1024 7b:e5:6f:a7:f4:f9:81:62:5c:e3:1f:bf:8b:57:6c:5a
\c If you trust this host, hit Yes to add the key to
\c PuTTY's cache and carry on connecting.
\c If you want to carry on connecting just once, without
\c adding the key to the cache, hit No.
\c If you do not trust this host, hit Cancel to abandon the
\c connection.

This is a feature of the SSH protocol. It is designed to protect you
against a network attack known as \e{spoofing}: secretly redirecting
your connection to a different computer, so that you send your
password to the wrong machine. Using this technique, an attacker
would be able to learn the password that guards your login account,
and could then log in as if they were you and use the account for
their own purposes.

To prevent this attack, each server has a unique identifying code,
called a \e{host key}. These keys are created in a way that prevents
one server from forging another server's key. So if you connect to a
server and it sends you a different host key from the one you were
expecting, PuTTY can warn you that the server may have been switched
and that a spoofing attack might be in progress.

PuTTY records the host key for each server you connect to, in the
Windows Registry. Every time you connect to a server, it checks that
the host key presented by the server is the same host key as it was
the last time you connected. If it is not, you will see a warning,
and you will have the chance to abandon your connection before you
type any private information (such as a password) into it.

However, when you connect to a server you have not connected to
before, PuTTY has no way of telling whether the host key is the
right one or not. So it gives the warning shown above, and asks you
whether you want to trust this host key or not.

Whether or not to trust the host key is your choice. If you are
connecting within a company network, you might feel that all the
network users are on the same side and spoofing attacks are
unlikely, so you might choose to trust the key without checking it.
If you are connecting across a hostile network (such as the
Internet), you should check with your system administrator, perhaps
by telephone or in person. (Some modern servers have more than one
host key. If the system administrator sends you more than one
fingerprint, you should make sure the one PuTTY shows you is on the
list, but it doesn't matter which one it is.)

\# FIXME: this is all very fine but of course in practice the world
doesn't work that way. Ask the team if they have any good ideas for
changes to this section!

\H{gs-login} Logging In

After you have connected, and perhaps verified the server's host
key, you will be asked to log in, probably using a username and a
password. Your system administrator should have provided you with
these. Enter the username and the password, and the server should
grant you access and begin your session. If you have mistyped your
password, most servers will give you several chances to get it
right.

If you are using SSH, be careful not to type your username wrongly,
because you will not have a chance to correct it after you press
Return. This is an unfortunate feature of the SSH protocol: it does
not allow you to make two login attempts using different usernames.
If you type your username wrongly, you must close PuTTY and start
again.

If your password is refused but you are sure you have typed it
correctly, check that Caps Lock is not enabled. Many login servers,
particularly Unix computers, treat upper case and lower case as
different when checking your password; so if Caps Lock is on, your
password will probably be refused.

\H{gs-session} After Logging In

After you log in to the server, what happens next is up to the
server! Most servers will print some sort of login message and then
present a prompt, at which you can type commands which the server
will carry out. Some servers will offer you on-line help; others
might not. If you are in doubt about what to do next, consult your
system administrator.

\H{gs-logout} Logging Out

When you have finished your session, you should log out by typing
the server's own logout command. This might vary between servers; if
in doubt, try \c{logout} or \c{exit}, or consult a manual or your
system administrator. When the server processes your logout command,
the PuTTY window should close itself automatically.

You \e{can} close a PuTTY session using the Close button in the
window border, but this might confuse the server - a bit like
hanging up a telephone unexpectedly in the middle of a conversation.
We recommend you do not do this unless the server has stopped
responding to you and you cannot close the window any other way.